Degradation and Mineralization of Carbamazepine Using an Electro-Fenton Reaction Catalyzed by Magnetite Nanoparticles Fixed on an Electrocatalytic Carbon Fiber Textile Cathode

High-Efficiency Electrocatalysis of Molecular Oxygen toward Hydroxyl Radicals Enabled by an Atomically Dispersed Iron Catalyst

Fenton catalysis represents the promising technology to produce super-active ·OH for tackling severe water environment pollution issues, whereas it suffers from low atomic efficiency, poor pH adaptability, and catalyst non-reusability in a homogeneous or heterogeneous system. Here, single-atom iron catalysis is creatively introduced to drive electrochemical ·OH evolution utilizing earth-abundant oxygen and water as raw materials. The atomically dispersed iron settled by defective three-dimensional porous carbon (AD-Fe/3DPC) with unique C, Cl unsaturated coordination can efficiently tune the multi-electron oxygen reduction process, enabling O₂-to-·OH conversion. The mass activity in ·OH production by AD-Fe/3DPC is almost two-orders of magnitude higher as compared to that by nanoparticular iron oxide catalyst. Meanwhile, the AD-Fe/3DPC electro-Fenton system exhibits fast elimination of refractory toxic pollutants, surpassing nanoparticular iron oxides in kinetic rate by 59 times or homogeneous Fenton by 10 times under similar experimental conditions. Experimental and theoretical results demonstrate that the remarkable enhanced mass activity of AD-Fe/3DPC in catalyzing O₂ to ·OH is contributed by the synergistic effects of the maximized catalysis of atomically dispersed iron and the unique unsaturated coordination environment. The AD-Fe/3DPC catalytic system is demonstrated to be pH-universal, long-term stable, and well recyclable, truly satisfying flexible, sustainable, and green application of wastewater purification. This study gives a new sight into local coordination modulation of single-atom catalysts for selective electrocatalytic oxygen reduction.

An integrated electrocoagulation - Electrocatalysis water treatment process using stainless steel cathodes coated with ultrathin TiO2 nanofilms

Anodic electrocoagulation processes can remove broad varieties of pollutants in industrial wastewater. However, some stubborn contaminants may still remain in effluents after the treatment and cause environmental issues. To further improve the efficiency of pollutant removal, we have coupled electrocatalysis with electrocoagulation and applied an atomic layer deposition (ALD) enabled TiO₂ ultrathin overcoating at a nanometer scale on a stainless steel cathode. The electrocatalytic overcoating increased the elimination efficiency of organics and microorganisms, likely due to the electro-generation of adequate reactive oxygen species (ROS). The thickness of TiO₂ nanofilm was controlled by the number of ALD cycles, and it was found that nanofilms processed with 50-100 cycles led to the maximum benefit of pollutant removal. By using the novel electrocoagulation-electrocatalysis cell to treat synthetic wastewater, a remarkable removal of 99.92% of E. Coli, 92.1% of suspended solids, 98.3% of heavy metal ions, and 88.8% of methylene blue was observed. This hybrid electrochemical treatment process may have the potential to treat wastewater at a larger scale.

Supported Atomically-Precise Gold Nanoclusters for Enhanced Flow-through Electro-Fenton

Gold (Au) has been considered catalytically inert for decades, but recent reports have described the ability of Au nanoparticles to catalyze H₂O₂ decomposition in the Haber-Weiss cycle. Herein, the design and demonstration of a flow-through electro-Fenton system based on an electrochemical carbon nanotube (CNT) filter functionalized with atomically precise Au nanoclusters (AuNCs) is described. The functionality of the device was then tested for its ability to catalyze antibiotic tetracycline degradation. In the functional filters, the Au core of AuNCs served as a high-performance Fenton catalyst; while the AuNCs ligand shells enabled CNT dispersion in aqueous solution for easy processing. The hybrid filter enabled in situ H₂O₂ production and catalyzed the subsequent H₂O₂ decomposition to HO·. The catalytic function of AuNCs lies in their ability to undergo redox cycling of Au⁺/Au⁰ under an electric field. The atomically precise AuNCs catalysts demonstrated superior catalytic activity to larger nanoparticles; while the flow-through design provided convection-enhanced mass transport, which yielded a superior performance compared to a conventional batch reactor. The adsorption behavior and decomposition pathway of H₂O₂ on the filter surfaces were simulated by density functional theory calculations. The research outcomes provided atomic-level mechanistic insights into the Au-mediated Fenton reaction.

Fabrication of a double-layer membrane cathode based on modified carbon nanotubes for the sequential electro-Fenton oxidation of p-nitrophenol

To improve the electrocatalytic efficiency of the cathode and provide a wider pH range in the electro-Fenton process, N-doped multi-walled carbon nanotubes (NCNTs) and ferrous ion complexed with carboxylated carbon nanotubes (CNT-COOFe²⁺) were used to fabricate the diffusion layer and catalyst layer of a membrane cathode, respectively. The morphology, structure, and composition of CNT-COOFe²⁺ were characterized by scanning electron microscopy (SEM), X-ray diffraction (XRD), Raman spectroscopy, and X-ray photoelectron spectroscopy (XPS). The oxygen reduction performance of NCNT was evaluated using cyclic voltammetry (CV) and the rotating disk electrode technique (RDE). In addition, a potential application of the cathode in sequential electro-Fenton degradation of p-nitrophenol (p-NP) was investigated. The results revealed that iron was successfully doped on the carboxylated carbon nanotubes in ionic complexation form and the content of iron atoms in CNT-COOFe²⁺ was 2.65%. Furthermore, the defects on the tube walls provided more reactive sites for the electro-Fenton process. A combination of CV and RDE data indicated that NCNT had better electrocatalytic H₂O₂ generation activity with a more positive onset potential and higher cathodic peak current response than CNT. A p-NP removal rate of 96.04% was achieved within 120 min, and a mineralization efficiency of 80.26% was obtained at 180 min in the sequential electro-Fenton process at a cathodic potential of - 0.7 V vs SCE and neutral pH. The activity of the used cathode was restored simply through electro-reduction at - 1.0 V vs SCE, and a p-NP removal rate of more than 70% was obtained at 60 min after six regeneration cycles.

Spatial confinement of cobalt crystals in carbon nanofibers with oxygen vacancies as a high-efficiency catalyst for organics degradation

Catalytic activation of peroxymonosulfate (PMS) to generate radicals has received considerable and increasing attention in the environmental catalysis for treatment of recalcitrant pollutants. In the current study, a series of highly porous, cobalt-loaded activated carbon nanofibers (Co/CNFs) were prepared by one-pot electrospinning followed by thermal treatment. Observations showed that the limited addition of Co (≤8%) had no obvious effect on the morphology of the resulted CNFs, but it did affect the surface area and porosity of the CNFs as well as the carbon graphitic process during the carbonization. The applicability of this confined nanoreactor used in sulfate-radical based advanced oxidation processes (SR-AOPs) was systematically investigated. The effect of pH on the radical generation and organics removal was examined. The oxygen species on the CNFs played an important role in the activation of PMS. The carbon layer encapsulated on the Co crystal surface inhibited the Co leaching during the reaction and increased the catalytic efficiency due to the enhanced interfacial charge transfer. Meanwhile, the carbon layer could synchronously function as the adsorptive active sites during the degradation of organics. Results showed that the Co/CNFs possessed the highest catalytic efficiency under neutral pH, corresponding to the sulfate radical generation. The Co leaching and XPS results showed that the Co served as the main active site in PMS activation.

Selective electrochemical H2O2 generation and activation on a bifunctional catalyst for heterogeneous electro-Fenton catalysis

Heterogeneous electro-Fenton is attractive for pollutants removal, where H₂O₂ is in-situ generated and simultaneously activated to ·OH at the cathodic catalyst. However, the heterogeneous electro-Fenton efficiency is limited by low H₂O₂ production and slow Fe(II) regeneration, which can be improved by tuning oxygen reduction selectivity and facilitating electron transfer to Fe(III) centers. Herein, we designed a bifunctional catalyst with FeOx nanoparticles embedded into N-doped hierarchically porous carbon (FeOx/NHPC). The activity and selectivity for H₂O₂ production were improved by regulating N doping configurations and contents. The obtained FeOx/NHPC750 presented high catalytic activity for H₂O₂ production with a low overpotential of 190 mV and high H₂O₂ selectivity of 95%˜98% at -0.3 V to -0.8 V. The Fe(II) regeneration was enhanced by the strong interfacial interaction between FeOx and N-doped porous carbon support, which leaded to a rapid decomposition of H₂O₂ into ·OH. FeOx/NHPC750 exhibited excellent electro-Fenton performance for the degradation and mineralization of phenol, sulfamethoxazole, atrazine, rhodamine B and 2,4-dichlorophenol in neutral reaction solution. This study offered a new strategy to construct an efficient and durable bifunctional catalyst for heterogeneous electro-Fenton system for advanced treatment of refractory wastewater.

Simultaneously Providing Iron Source toward Electro-Fenton Process and Enhancing Hydrogen Peroxide Production via a Fe3O4 Nanoparticles Embedded Graphite Felt Electrode

Electro-reduction of O₂ to generate H₂O₂ is an attractive alternative to the current anthraquinone process and quite necessary for chemical industries and environmental remediation. In general, sufficient porous structure contributes to expose more catalytic active sites and shorten diffusion paths for the heterogeneous catalysis of O₂. In this work, initially the Fe₃O₄ nanoparticles embedded graphite felt (Fe₃O₄@GF) is prepared through a mild hydrothermal following with thermal reduction method. This special combination not only provides iron source for the electro-Fenton reaction but also supplies rich active sites from the Fe₃O₄ embedded structure with abundant cracks, which are beneficial to increase the reaction rate. Compared with raw graphite felt (RGF), fresh Fe₃O₄@GF exhibits superior pollutant degradation kinetics with more than 400% increase and approximately 37.8% improvement to the removal of total organic carbon. A 98% decolorization of rhodamine B (RhB) can be achieved in just 5 min and quickly completes 100% removal of RhB in the next few seconds. As the electro-Fenton reaction progresses, Fe₃O₄ dissolves in the electrolyte, leaving a porous structure on the surface of the GF to form a porous GF (PGF), and the rapid radical reaction activates the GF surface. Both the chemical etching of Fe₃O₄ and the electro-Fenton process can further increase the specific surface area, defects, and actives sites of the electrode. As expected, the active PGF exhibits favorable performance of H₂O₂ production in electrolytes of different pHs: 1 (320.0 ± 36.5 mg L^-1), 3 (301.9 ± 13.2 mg L^-1), and 7 (320.4 ± 21.2 mg L^-1). The degradation performance of PGF does not significantly decay even after 20 cycles of repeated use, indicating the good structural stability and long-term durability. The superiority of the in situ Fe source and fast reaction kinetics for electro-Fenton of Fe₃O₄@GF is confirmed, and this holey engineered strategy also provides the possibility to achieve swift water purification and open up a new way for developing efficient carbon-based electrodes.

Highly Efficient Degradation of Polyacrylamide by an Fe-Doped Ce0.75Zr0.25O2 Solid Solution/CF Composite Cathode in a Heterogeneous Electro-Fenton Process

Polyacrylamide (PAM) in environmental water has become a major problem in water pollution management due to its high molecular mass, corrosion resistance, high viscosity, and nonabsorption by soil. The composite of Fe-doped Ce_0.75Zr_0.25O₂ solid solution (Fe-Ce_0.75Zr_0.25O₂) loaded on carbon felt (CF) was fabricated by a hydrothermal synthesis method, which was used as the cathode in a heterogeneous electro-Fenton system for the degradation of PAM. It showed that the degradation efficiency of PAM by the Fe-Ce_0.75Zr_0.25O₂/CF cathode was 86% after 120 min and the molecular mass of PAM decreased by more than 90% after 300 min. Total organic carbon removal reached 78.86% in the presence of Fe-Ce_0.75Zr_0.25O₂/CF, while the value was only 38.01% in the absence of Fe-Ce_0.75Zr_0.25O₂. Further studies showed that the breaking of the chain begins with the amide bond, and then, the carbon chain was cracked into a short alkyl chain. As degradation progressed, both the complex viscosity and elasticity modulus of PAM solutions decreased nearly 50% at 300 min. It indicated that ^•OH were the most significant active species for the degradation of PAM. This novel Fe-Ce_0.75Zr_0.25O₂/CF composite is an efficient and promising electrode for the removal of PAM in wastewater.

Multiphase Porous Electrochemical Catalysts Derived from Iron-Based Metal-Organic Framework Compounds

Herbicide use has attracted attention recently due to potential damage to human health and lethality to the honey bees and other pollinators. Fenton reagent treatment processes can be applied for the degradation of herbicidal contaminants from water. However, the need to carry out the normal Fenton reactions under acidic conditions often hinders their practical application for pollution control. Herein, we report on the synthesis and application of multiphasic porous electro-Fenton catalysts prepared from calcinated metal-organic framework compounds, CMOF@PCM, and their application for the mineralization of herbicides in aqueous solution at circum-neutral pH. CMOF nanoparticles (NPs) are anchored on porous carbon monolithic (PCM) substrates, which allow for binder-free application. H2O2 is electrochemically generated on the PCM substrate which serves as a cathode, while ·OH is generated by the CMOF NPs at low applied potentials (-0.14 V). Results show that the structure and reactivity of the CMOF@PCM electro-Fenton catalysts are dependent on the specific MOF precursor used during synthesis. For example, CMIL-88-NH2, which is prepared from MIL-88(Fe)-NH2, is a porous core-shell structured NP comprised of a cementite (Fe3C) intermediate layer that is sandwiched between a graphitic shell and a magnetite (Fe3O4) core. The electro-Fenton production of hydroxyl radical on the CMOF@PCM composite material is shown to effectively degrade an array of herbicides.