Fine-Tuning Nanoparticle Packing at Water-Oil Interfaces Using Ionic Strength

Adsorption of charged anisotropic nanoparticles at oil-water interfaces

The adsorption of nanoparticles at fluid interfaces is of profound importance in the field of nanotechnology. Recent developments aim at pushing the boundaries beyond spherical model particles towards more complex shapes and surface chemistries, with particular interest in particles of biological origin. Here, we report on the adsorption of charged, shape-anisotropic cellulose nanocrystals (CNCs) for a wide range of oils with varying chemical structure and polarity. CNC adsorption was found to be independent of the chain length of aliphatic n-alkanes, but strongly dependent on oil polarity. Surface pressures decreased for more polar oils due to lower particle adsorption energies. Nanoparticles were increasingly wetted by polar oils, and interparticle Coulomb interactions across the oil phase thus increase in importance. No surface pressure was measurable and the O/W emulsification capacity ceased for the most polar octanol, suggesting limited CNC adsorption. Further, salt-induced charge screening enhanced CNC adsorption and surface coverage due to lower interparticle and particle-interface electrostatic repulsion. An empiric power law is presented which predicts the induced surface pressure of charged nanoparticles based on the specific oil-water interface tension.

Mechanical Properties of Solidifying Assemblies of Nanoparticle Surfactants at the Oil-Water Interface

The effect of polymer surfactant structure and concentration on the self-assembly, mechanical properties, and solidification of nanoparticle surfactants (NPSs) at the oil-water interface was studied. The surface tension of the oil-water interface was found to depend strongly on the choice of the polymer surfactant used to assemble the NPSs, with polymer surfactants bearing multiple polar groups being the most effective at reducing interfacial tension and driving the NPS assembly. By contrast, only small variations in the shear modulus of the system were observed, suggesting that it is determined largely by particle density. In the presence of polymer surfactants bearing multiple functional groups, NPS assemblies on pendant drop surfaces were observed to spontaneously solidify above a critical polymer surfactant concentration. Interfacial solidification accelerated rapidly as polymer surfactant concentration was increased. On long timescales after solidification, pendant drop interfaces were observed to spontaneously wrinkle at sufficiently low surface tensions (approximately 5 mN m^-1). Interfacial shear rheology of the NPS assemblies was elastic-dominated, with the shear modulus ranging from 0.1 to 1 N m^-1, comparable to values obtained for nanoparticle monolayers elsewhere. Our work paves the way for the development of designer, multicomponent oil-water interfaces with well-defined mechanical, structural, and functional properties.

Influence of particle concentration on multiple droplet formation in Pickering emulsions

HYPOTHESIS

Multiphase droplets form when oil and water are mixed together at the ambivalent conditions that occur close to phase inversion. In this paper we propose a mechanism for the stabilisation of multiphase droplets by a single population of particles.

EXPERIMENTS

We investigated the microstructure of emulsions formed when dodecane and water are mixed in the presence of hydrophobic fumed silica nanoparticles. We identified the range of compositions, mixing times and rates where water-in-oil-in-water emulsions are stabilised in a single mixing step. To explore how the particle availability and mixing conditions lead to multiple emulsion formation we used light scattering and microscopy techniques to probe the size and morphology of the drops, and the particle coverage of the interfaces.

FINDINGS

Our key finding is that to stabilise multiphase drops there should be sufficient particles available to coat water drops that are entrained within coalescing oil droplets. The size of an entrained drop is determined by the volume of the rupturing film that forms between the oil drops. The particle coating prevents the entrained drop from escaping into the external aqueous phase. These results suggest a simple route for controlling the formation and stability of multiple emulsions for encapsulation applications.

Interfacial Activity of Amine-Functionalized Polyhedral Oligomeric Silsesquioxanes (POSS): A Simple Strategy To Structure Liquids

Amine-functionalized polyhedral oligomeric silsesquioxane (POSS), the smallest, monodisperse cage-shaped silica cubic nanoparticle, is exceptionally interfacially active and can form assemblies that jam the toluene/water interface, locking in non-equilibrium shapes of one liquid phase in another. The packing density of the amine-functionalized POSS assembly at the water/toluene interface can be tuned by varying the concentration, the pH value, and the degree of POSS functionalization. Functionalized POSS gives a higher interface coverage, and hence a lower interfacial tension, than nanoparticle surfactants formed by interactions between functionalized nanoparticles and polymeric ligands. Hydrogen-bonded POSS surfactants are more stable at the interface, offering some unique advantages for generating Pickering emulsions over typical micron-sized colloidal particles and ligand-stabilized nanoparticle surfactants.

Nanorod-Surfactant Assemblies and Their Interfacial Behavior at Liquid-Liquid Interfaces

The interfacial behavior of cellulose nanocrystal (CNC) surfactants (CNCSs), formed by the interactions between CNCs dispersed in water and amine terminated polymer dissolved in oil, was investigated using in situ atomic force microscopy (AFM) as a function of pH and areal density of CNCSs. The AFM results show that the strength of the interactions between the CNCs and the ligands dictates the response of the CNCS assemblies to an applied compress whether the assemblies wrinkle or buckle or if the orientation of the CNCSs with respect to the interfaces is changed. AFM force curve measurements provide an alternative route to evaluate the interfacial tension and, more importantly, allow quantitative evaluation of the strength of interactions between the CNCs assembled at the interface.

Building Reconfigurable Devices Using Complex Liquid-Fluid Interfaces

Liquid-fluid interfaces provide a platform both for structuring liquids into complex shapes and assembling dimensionally confined, functional nanomaterials. Historically, attention in this area has focused on simple emulsions and foams, in which surface-active materials such as surfactants or colloids stabilize structures against coalescence and alter the mechanical properties of the interface. In recent decades, however, a growing body of work has begun to demonstrate the full potential of the assembly of nanomaterials at liquid-fluid interfaces to generate functionally advanced, biomimetic systems. Here, a broad overview is given, from fundamentals to applications, of the use of liquid-fluid interfaces to generate complex, all-liquid devices with a myriad of potential applications.

Harnessing liquid-in-liquid printing and micropatterned substrates to fabricate 3-dimensional all-liquid fluidic devices

Systems comprised of immiscible liquids held in non-equilibrium shapes by the interfacial assembly and jamming of nanoparticle-polymer surfactants have significant potential to advance catalysis, chemical separations, energy storage and conversion. Spatially directing functionality within them and coupling processes in both phases remains a challenge. Here, we exploit nanoclay-polymer surfactant assemblies at an oil-water interface to produce a semi-permeable membrane between the liquids, and from them all-liquid fluidic devices with bespoke properties. Flow channels are fabricated using micropatterned 2D substrates and liquid-in-liquid 3D printing. The anionic walls of the device can be functionalized with cationic small molecules, enzymes, and colloidal nanocrystal catalysts. Multi-step chemical transformations can be conducted within the channels under flow, as can selective mass transport across the liquid-liquid interface for in-line separations. These all-liquid systems become automated using pumps, detectors, and control systems, revealing a latent ability for chemical logic and learning.

Natural Halloysites-Based Janus Platelet Surfactants for the Formation of Pickering Emulsion and Enhanced Oil Recovery

Janus colloidal surfactants with opposing wettabilities are receiving attention for their practical application in industry. Combining the advantages of molecular surfactants and particle-stabilized Pickering emulsions, Janus colloidal surfactants generate remarkably stable emulsions. Here we report a straightforward and cost-efficient strategy to develop Janus nanoplate surfactants (JNPS) from an aluminosilicate nanoclay, halloysite, by stepwise surface modification, including an innovative selective surface modification step. Such colloidal surfactants are found to be able to stabilize Pickering emulsions of different oil/water systems. The microstructural characterization of solidified polystyrene emulsions indicates that the emulsion interface is evenly covered by JNPS. The phase behaviors of water/oil emulsion generated by these novel platelet surfactants were also investigated. Furthermore, we demonstrate the application of JNPS for enhanced oil recovery with a microfluidic flooding test, showing a dramatic increase of oil recovery ratio. This research provides important insights for the design and synthesis of two-dimensional Janus colloidal surfactants, which could be utilized in biomedical, food and mining industries, especially for circumstances where high salinity and high temperature are involved.

Nanoparticle Assembly at Liquid-Liquid Interfaces: From the Nanoscale to Mesoscale

In the past few decades, novel syntheses of a wide range of nanoparticles (NPs) with well-defined chemical composition and structure have opened tremendous opportunities in areas ranging from optical and electronic devices to biomedical markers. Controlling the assembly of such well-defined NPs is important to effectively harness their unique properties. The assembly of NPs at liquid-liquid interfaces is becoming a central topic both in surface and colloid science. Hierarchical structures, including 2D films, 3D capsules, and structured liquids, have been generating significant interest and are showing promise for physical, chemical, and biological applications. Here, a brief overview of the development of the self-assembly of NPs at liquid-liquid interfaces is provided, from theory to experiment, from synthetic NPs to bio-nanoparticles, from water-oil to water-water, and from "liquid-like" to "solid-like" assemblies.

How Implementation of Entropy in Driving Structural Ordering of Nanoparticles Relates to Assembly Kinetics: Insight into Reaction-Induced Interfacial Assembly of Janus Nanoparticles

The ability to understand and exploit entropic contributions to ordering transition is of essential importance in the design of self-assembling systems with well-controlled structures. However, much less is known about the role of assembly kinetics in entropy-driven phase behaviors. Here, by combining computer simulations and theoretical analysis, we report that the implementation of entropy in driving phase transition significantly depends on the kinetic process in the reaction-induced self-assembly of newly designed nanoparticle systems. In particular, such systems comprise binary Janus nanoparticles at the fluid-fluid interface and undergo phase transition driven by entropy and controlled by the polymerization reaction initiated from the surfaces of just one component of nanoparticles. Our simulations demonstrate that the competition between the reaction rate and the diffusive dynamics of nanoparticles governs the implementation of entropy in driving the phase transition from randomly mixed phase to intercalated phase in these interfacial nanoparticle mixtures, which thereby results in diverse kinetic pathways. At low reaction rates, the transition exhibits abrupt jump in the mixing parameter, in a similar way to first-order, equilibrium phase transition. Increasing the reaction rate diminishes the jumps until the transitions become continuous, behaving as a second-order-like phase transition, where a critical exponent, characterizing the transition, can be identified. We finally develop an analytical model of the blob theory of polymer chains to complement the simulation results and reveal essential scaling laws of the entropy-driven phase behaviors. In effect, our results allow for further opportunities to amplify the entropic contributions to the materials design via kinetic control.

Guiding kinetic trajectories between jammed and unjammed states in 2D colloidal nanocrystal-polymer assemblies with zwitterionic ligands

Mesostructured matter composed of colloidal nanocrystals in solidified architectures abounds with broadly tunable catalytic, magnetic, optoelectronic, and energy storing properties. Less common are liquid-like assemblies of colloidal nanocrystals in a condensed phase, which may have different energy transduction behaviors owing to their dynamic character. Limiting investigations into dynamic colloidal nanocrystal architectures is the lack of schemes to control or redirect the tendency of the system to solidify. We show how to solidify and subsequently reconfigure colloidal nanocrystal assemblies dimensionally confined to a liquid-liquid interface. Our success in this regard hinged on the development of competitive chemistries anchoring or releasing the nanocrystals to or from the interface. With these chemistries, it was possible to control the kinetic trajectory between quasi-two-dimensional jammed (solid-like) and unjammed (liquid-like) states. In future schemes, it may be possible to leverage this control to direct the formation or destruction of explicit physical pathways for energy carriers to migrate in the system in response to an external field.

The Role of Electrostatic Repulsion on Increasing Surface Activity of Anionic Surfactants in the Presence of Hydrophilic Silica Nanoparticles

Hydrophilic silica nanoparticles alone are not surface active. They, however, develop a strong electrostatic interaction with ionic surfactants and consequently affect their surface behavior. We report the interfacial behavior of n-heptane/anionic-surfactant-solutions in the presence of hydrophilic silica nanoparticles. The surfactants are sodium dodecyl sulfate (SDS) and dodecyl benzene sulfonic acid (DBSA), and the diameters of the used particles are 9 and 30 nm. Using experimental tensiometry, we show that nanoparticles retain their non-surface-active nature in the presence of surfactants and the surface activity of surfactant directly increases with the concentration of nanoparticles. This fact was attributed to the electrostatic repulsive interaction between the negatively charged nanoparticles and the anionic surfactant molecules. The role of electrostatic repulsion on increasing surface activity of the surfactant has been discussed. Further investigations have been performed for screening the double layer charge of the nanoparticles in the presence of salt. Moreover, the hydrolysis of SDS molecules in the presence of silica nanoparticles and the interaction of nanoparticles with SDS inherent impurities have been studied. According to our experimental observations, silica nanoparticles alleviate the effects of dodecanol, formed by SDS hydrolysis, on the interfacial properties of SDS solution.

Competitive Adsorption between Nanoparticles and Surface Active Ions for the Oil-Water Interface

Nanoparticles (NPs) can add functionality (e.g., catalytic, optical, rheological) to an oil-water interface. Adsorption of ∼10 nm NPs can be reversible; however, the mechanisms for adsorption and its effects on surface pressure remain poorly understood. Here we demonstrate how the competitive reversible adsorption of NPs and surfactants at fluid interfaces can lead to independent control of both the adsorbed amount and surface pressure. In contrast to prior work, both species investigated (NPs and surfactants) interact reversibly with the interface and without the surface active species binding to NPs. Independent measurements of the adsorption and surface pressure isotherms allow determination of the equation of state (EOS) of the interface under conditions where the NPs and surfactants are both in dynamic equilibrium with the bulk phase. The adsorption and surface pressure measurements are performed with gold NPs of two different sizes (5 and 10 nm), at two pH values, and across a wide concentration range of surfactant (tetrapentylammonium, TPeA⁺) and NPs. We show that free surface active ions compete with NPs for the interface and give rise to larger surface pressures upon the adsorption of NPs. Through a competitive adsorption model, we decouple the contributions of NPs wetting at the interface and their surface activity on the measured surface pressure. We also demonstrate reversible control of adsorbed amount via changes in the surfactant concentration or the aqueous phase pH.

Tailoring Interfacial Nanoparticle Organization through Entropy

The ability to tailor the interfacial behaviors of nanoparticles (NPs) is crucial not only for the design of novel nanostructured materials with superior properties and of interest for many promising applications such as water purification, enhanced oil recovery, and innovative energy transduction, but also for a better insight into many biological systems where nanoscale particles such as proteins or viruses can interact and organize at certain interfaces. As a class of emerging building blocks, Janus NPs consisting of two compartments of different chemistry or polarity are ideal candidates to generate tunable and stable interfacial nanostructures because of the asymmetric nature. However, precise control over such interfacial nanostructures toward a controllable order and even responses to various external stimuli still remains a great challenge as the interfaces do not simply serve as a scaffold but rather induce complex enthalpic and entropic interactions. In this Account, we focus on our efforts on exploiting entropy strategies based on computational design to tailor the spatial distribution and ordering of NPs at the interfaces of various systems. First, we introduce the physical principle of entropic ordering, being the theoretical basis of entropy-directed interfacial self-assembly. The typical types of entropy, which have been harnessed to manipulate the interfacial NP organization, are then summarized, including conformational entropy, shape entropy, and rotational and vibrational entropy. Next, we describe the emerging pathways in the development of novel environmentally responsive systems which involve the use of entropy to access the stimuli-responsive behaviors of interfacial nanostructures. Taking one step further, how molecular architectures can be tailored to tune the entropic contributions to the interfacial self-assembly is demonstrated, through identifying the effects of various intrinsic properties of block segments, such as chain length and stiffness, on entropy-governed precise organization of Janus NPs at block copolymer interfaces. Finally, we detail some key factors for tailoring interfacial organization through entropy. In summary, entropy strategies offer a promising and abundant framework for precisely programming the structural organization of NPs at interfaces. We discuss future directions to signify the framework in tailoring the interfacial organization of NPs. We hope that this Account will promote further efforts toward fundamental research and the wide applications of designed interfacial assemblies in new types of functional nanomaterials and beyond.

In situ X-ray scattering observation of two-dimensional interfacial colloidal crystallization

Charged colloids at interfaces hold such a simple configuration that their interactions are supposed to be fully elucidated in the framework of classical electrostatics, yet the mysterious existence of attractive forces between these like-charged particles has puzzled the scientific community for decades. Here, we perform the in situ grazing-incidence small-angle X-ray scattering study of the dynamic self-assembling process of two-dimensional interfacial colloids. This approach allows simultaneous monitoring of the in-plane structure and ordering and the out-of-plane immersion depth variation. Upon compression, the system undergoes multiple metastable intermediate states before the stable hexagonal close-packed monolayer forms under van der Waals attraction. Remarkably, the immersion depth of colloidal particles is found to increase as the interparticle distance decreases. Numerical simulations demonstrate the interface around a colloid is deformed by the electrostatic force from its neighboring particles, which induces the long-range capillary attraction.

Colloids adsorbed at fluid interfaces can self-assemble into crystal, but the detail remains largely unknown due to experimental challenges. Using in situ X-ray scattering, Wu et al. show that out-of-plane electrostatic force induces in-plane capillary attraction between like-charged particles.

Reconfigurable Printed Liquids

Liquids lack the spatial order required for advanced functionality. Interfacial assemblies of colloids, however, can be used to shape liquids into complex, 3D objects, simultaneously forming 2D layers with novel magnetic, plasmonic, or structural properties. Fully exploiting all-liquid systems that are structured by their interfaces would create a new class of biomimetic, reconfigurable, and responsive materials. Here, printed constructs of water in oil are presented. Both form and function are given to the system by the assembly and jamming of nanoparticle surfactants, formed from the interfacial interaction of nanoparticles and amphiphilic polymers that bear complementary functional groups. These yield dissipative constructs that exhibit a compartmentalized response to chemical cues. Potential applications include biphasic reaction vessels, liquid electronics, novel media for the encapsulation of cells and active matter, and dynamic constructs that both alter, and are altered by, their external environment.

Quantitative Prediction of Position and Orientation for Platonic Nanoparticles at Liquid/Liquid Interfaces

Because of their intrinsic geometric structure of vertices, edges, and facets, Platonic nanoparticles are promising materials in plasmonics and biosensing. Their position and orientation often play a crucial role in determining the resultant assembly structures at a liquid/liquid interface. Here, we numerically explored all possible orientations of three Platonic nanoparticles (tetrahedron, cube, and octahedron) and found that a specific orientation (vertex-up, edge-up, or facet-up) is more preferred than random orientations. We also demonstrated their positions and orientations can be quantitatively predicted when the surface tensions dominate their total interaction energies. The line tensions may affect their positions and orientations only when total interaction energies are close to each other for more than one orientation. The molecular dynamics simulation results were in excellent agreement with our theoretical predictions. Our theory will advance our ability toward predicting the final structures of Platonic nanoparticle assemblies at a liquid/liquid interface.