Size Engineering of Metal–Organic Framework MIL-101(Cr)–Ag Hybrids for Photocatalytic CO2 Reduction

Refine the crystallinity of upconversion nanoparticles for NIR-enhanced photocatalysis

A new photocatalyst was synthesized by a combination of the upconversion nanoparticle NaYF4:Yb, Tm, Gd (NYTG) and NH2-MIL-101(Cr) (NMC) to form NYTG/NMC.

Single- and mixed-metal–organic framework photocatalysts for carbon dioxide reduction

This review focuses on the important roles of varied metal types over MOF-based photocatalysts. The basic principles, types of MOF photocatalysts and roles of the reaction system to achieve efficient MOFs for CO₂ photoreduction are discussed.

Direct Evidence of Photoinduced Charge Transport Mechanism in 2D Conductive Metal Organic Frameworks

Conductive metal organic frameworks (MOFs) represent a promising class of porous crystalline materials that have demonstrated potential in photo-electronics and photocatalytic applications. However, the lack of fundamental understanding on charge transport (CT) mechanism as well as the correlation of CT mechanism with their structure hampered their further development. Herein, we report the direct evidence of CT mechanism in 2D Cu-THQ MOFs and the correlation of temporal and spatial behaviors of charge carriers with their photoconductivity by combining three advanced spectroscopic methods, including time resolved optical and X-ray absorption spectroscopy and terahertz spectroscopy. In addition to Cu-THQ, the CT in Cu/Zn-THQ after incorporating Zn²⁺ guest metal was also examined to uncover the contribution of through space pathway, as the presence of the redox inactive 3d¹⁰ Zn²⁺ is expected to perturb the long range in-plane CT. We show that the hot carriers in Cu-THQ generated after photoexcitation are highly mobile and undergo fast localization to a lower energy state (cool carriers) with electrons occupying Cu center and holes in ligands. The cool carriers, which have super long lifetime (>17 ns), are responsible for the long-term photoconductivity in Cu-THQ and transport through the O-Cu-O motif with negligible contribution from interlayer ligand π-π stacking, as incorporation of Zn²⁺ in Cu-THQ significantly reduced photoconductivity. These unprecedented results not only demonstrate the capability to experimentally probe CT mechanism but also provide important insight in the rational design of 2D MOFs for photoelectronic and photocatalytic applications.

Photocatalytic Reduction of CO2 to CO over Quinacridone/BiVO4 Nanocomposites

Solar energy-driven photoreduction of CO₂ to energy-rich chemicals is of significance for sustainable development but challenging. Herein, quinacridone (QA)/nBiVO₄ (n=0.2-20, in which n stands for the mass ratio of BiVO₄ to QA) nanocomposites were developed for photoreduction of CO₂ . Characterization of the materials with Fourier-transform (FT)IR spectroscopy and X-ray photoelectron spectroscopy (XPS) pointed to QA/nBiVO₄ preparation via hydrogen-bonding-directed self-assembly of QA on BiVO₄ nanosheets. Using triethanolamine (TEOA) as a sacrifice reagent, QA/10BiVO₄ showed the best performance, affording CO with a production rate of 407 μmol g^-1  h^-1 , 24 times higher than those of pure QA. It was indicated that the Z-scheme charge-transfer mechanism of QA/nBiVO₄ could significantly improve the separation and transmission efficiency of photo-generated electrons and holes. This novel approach provides new insight for fabricating the composite photocatalytic materials of small molecule organic semiconductors and inorganic semiconductors with high efficiency for photocatalytic of reduction CO₂ .

Recent Advances in Photocatalytic CO2 Utilisation Over Multifunctional Metal–Organic Frameworks

The efficient conversion of carbon dioxide (CO2) to high-value chemicals using renewable solar energy is a highly attractive but very challenging process that is used to address ever-growing energy demands and environmental issues. In recent years, metal–organic frameworks (MOFs) have received significant research attention owing to their tuneability in terms of their composition, structure, and multifunctional characteristics. The functionalisation of MOFs by metal nanoparticles (NPs) is a promising approach used to enhance their light absorption and photocatalytic activity. The efficient charge separation and strong CO2 binding affinity of hybrid MOF-based photocatalysts facilitate the CO2 conversion process. This review summarises the latest advancements involving noble metal, non-noble-metal, and miscellaneous species functionalised MOF-based hybrid photocatalysts for the reduction of CO2 to carbon monoxide (CO) and other value-added chemicals. The novel synthetic strategies and their corresponding structure–property relationships have also been discussed for solar-to-chemical energy conversion. Furthermore, the current challenges and prospects in practical applications are also highlighted for sustainable energy production.

Improved photocatalytic degradation of ketoprofen by Pt/MIL-125(Ti)/Ag with synergetic effect of Pt-MOF and MOF-Ag double interfaces: Mechanism and degradation pathway

It is a central issue to improve the separation efficiency of photogenerated charge carriers and the utilization of visible light in the field of photocatalysis. Herein, taking MIL-125(Ti) as a host material, the Pt/MIL-125(Ti) was first prepared by solvothermal method to build the interface of Schottky junction. Ag was then introduced onto the surface of Pt/MIL-125(Ti) to form the interface with the surface plasmon resonance effect. These double interfaces in the composite play a synergistic role on the photodagradation. The morphology, crystallinity and photochemical properties of the material were tested. By comparison, Pt/MIL-125(Ti)/Ag (4 wt% Ag) exhibited the best performance in the photodegradation of ketoprofen (KP, 10 mg/L) and the degradation process conformed to the pseudo-first-order kinetics. The photodegradation rate is 0.0253 min^-1, which was higher than MIL-125(Ti) (0.0009 min^-1). The TOC removal efficiency of KP reached approximately 51.5%. The electron paramagnetic resonance (EPR) and free radical capture tests verified that h⁺ and ·OH played the prominent roles during the reaction system. The degradation process, possible pathways and reaction mechanism were proposed. The design of the double interfaces between semiconductor and noble metals is a novel strategy to enhance the photocatalytic performance.

A new family of lanthanide coordination polymers based on 3,3'-[(5-carboxylato-1,3-phenylene)bis(oxy)]dibenzoate: synthesis, crystal structures and magnetic and luminescence properties

Six two-dimensional (2D) coordination polymers (CPs), namely, poly[{μ₅-3,3-[(5-carboxylato-1,3-phenylene)bis(oxy)]dibenzoato-κ⁶O¹:O^1':O³,O^3':O⁵:O^5'}bis(N,N-dimethylformamide-κO)lanthanide(III)], [Ln(C₂₁H₁₁O₈)(C₃H₇NO)₂]_n, with lanthanide/Ln = cerium/Ce for CP1, praseodymium/Pr for CP2, neodymium/Nd for CP3, samarium/Sm for CP4, europium/Eu for CP5 and gadolinium/Gd for CP6, have been prepared by solvothermal methods using the ligand 3,3'-[(5-carboxy-1,3-phenylene)bis(oxy)]dibenzoic acid (H₃cpboda) in the presence of Ln(NO₃)₃. The complexes were characterized by single-crystal X-ray and powder diffraction, IR spectroscopy, elemental analysis and thermogravimetric analysis (TGA). All the structures of this family of lanthanide CPs are isomorphous with the triclinic space group P-1 and reveal that they have the same 2D network based on binuclear Ln^III units, which are further extended via interlayer C-H...π interactions into a three-dimensional supramolecular structure. The carboxylate groups of the cpboda^3- ligands link adjacent Ln^III ions and form binuclear [Ln₂(RCOO)₄] secondary building units (SBUs), in which each binuclear Ln^III SBU contains four carboxylate groups from different cpboda^3- ligands. Moreover, with the increase of the rare-earth Ln atomic radius, the dihedral angles between the aromatic rings gradually increase. Magnetically, CP6 shows weak antiferromagnetic coupling between the Gd^III ions. The solid-state luminescence properties of CP2, CP5 and CP6 were examined at ambient temperature and CP5 exhibits characteristic red emission bands derived from the Eu³⁺ ion (CIE 0.53, 0.31), with luminescence quantum yields of 22%. Therefore, CP5 should be regarded as a potential optical material.

Efficient photocatalysts of a tetraphenylporphyrin/P25 hybrid for visible-light photoreduction of CO2

A highly efficient TPP/P25 hybrid for the photoreduction of CO₂ was developed and prepared via weak interactions between TPP and P25. The optimized TPP/P25 hybrid shows excellent activity for CO₂ reduction. TPP loading has an important influence on the CO₂ reduction performance.

Tetrazole-based porous metal–organic frameworks for selective CO2 adsorption and isomerization studies

Tetrazole-based porous MOFs and isomers were synthesized for adsorbing carbon dioxide, showing high selectivity.

Coordination polymers with a pyridyl–salen ligand for photocatalytic carbon dioxide reduction

Fe(iii) and Mn(iii) coordination polymers with a pyridyl–salen ligand were constructed and have shown photocatalytic activity for CO₂reduction under visible-light irradiation.

3D lanthanide-coordination frameworks constructed by a ternary mixed-ligand: crystal structure, luminescence and luminescence sensing

Highly stable 3D Ln-MOFs were constructed by a ternary mixed-ligand. The Sm/Dy-MOFs present dual-emission while the Tb/Eu-MOFs exhibit red/green MC emission. The detection of quercetin and Fe³⁺ion was realized based on the luminescence Eu-MOF under the excitation of 358 nm.