Fine-Tuning the Pore Environment of the Microporous Cu-MOF for High Propylene Storage and Efficient Separation of Light Hydrocarbons

Design and synthesis of three new copper coordination polymers: efficient degradation of an organic dye at alkaline pH

Three new coordination polymers (CPs) based on Cu(II), namely {[Cu₆(H₂L)₄(4,4'-bpy)₆(H₂O)₂]·16H₂O}_n(1), {[Cu(H₃L)(1,4-bib)]·3H₂O}_n(2), and {[Cu₂(H₂L)₂(1,4-bib)₂][Cu(1,4-bib)(H₂O)₂]}_n·4nH₂O(3) (H₅L = 6-(3',4'-dicarboxyphenoxy)-2,3,5-benzene tricarboxylic acid, 4,4'-bpy = 4,4'-bipyridine and 1,4-bib = 1,4-bis(1H-imidazol-1-yl)benzene) were synthesized under hydrothermal conditions and characterized. 1 adopts a three-dimensional structure and can be described with the point symbol {4·5²}₂{4²·5⁴·6⁴·8³·9²}{5·10⁴·12} whereas 2 shows a layered structure. 3 can be perceived as a complex salt of two coordination polymers: the cationic component [Cu(1,4-bib)(H₂O)₂]_n²⁺ (3a) represents a chain polymer and the second anionic moiety [Cu₂(H₂L)₂(1,4-bib)₂]_n^2- (3b) corresponds to a 2D sub-structure. In the presence of H₂O₂, all complexes 1-3 act as efficient photocatalysts for the degradation of the dye methylene blue (MB). The effects of properties such as initial MB concentration, catalyst dosage, pH value, and H₂O₂ concentration on MB degradation were also investigated and analyzed in detail. Compounds 1-3 exhibit excellent structural stability during the catalytic process and can be reused at least three times. The hydroxyl radical (OH˙) and holes (h⁺) were confirmed as the main active species in the degradation process.

Structural Regulation and Light Hydrocarbon Adsorption/Separation of Three Zirconium-Organic Frameworks Based on Different V-Shaped Ligands

On the basis of different V-shaped ligands, three zirconium-organic frameworks (JLU-Liu45, Zr-SDBA, and Zr-OBBA) have been successfully constructed. By regulating spatial configuration and functional groups of organic ligands, these as-synthesized Zr-MOFs (MOF = metal-organic framework) display distinct structures and different light hydrocarbon adsorption/separation capabilities. JLU-Liu45, with a double-walled interpenetrated 3D primitive cubic (pcu) framework, exhibits good gas-adsorption capacity but not prominent selective separation ability. Through regulating sizes and torsion angles of the organic ligands, Zr-SDBA possesses a 2D square lattice (sql) network, while Zr-OBBA displays a non-interpenetrated 3D pcu framework. Furthermore, by regulating functional groups on the ligands, Zr-SDBA shows prominent C₂H₂ uptake (101.2 cm³·g^-1) and the best C₂H₂/CH₄ selectivity (230.5, 1:1) among the three Zr-MOFs, and Zr-OBBA shows a significant C₃H₈/CH₄ selectivity (105.6, 1:1). This work demonstrates the feasibility of structural regulation for MOF materials in the light hydrocarbon adsorption/separation field.

Tetrazole-Functionalized Zirconium Metal-Organic Cages for Efficient C2 H2 /C2 H4 and C2 H2 /CO2 Separations

Isoreticular functionalization is a well-elucidated strategy for pore environment tuning and the basis of gas separation performance in extended frameworks. The extension of this approach to discrete porous molecules such as metal-organic cages (MOCs) is conceptually straightforward but hindered by synthetic complications, especially stability concerns. We report the successful isoreticular functionalization of a zirconium MOC with tetrazole moiety by bottom-up synthesis. The title compound (ZrT-1-tetrazol) shows promising C₂ H₂ /CO₂ and C₂ H₂ /C₂ H₄ separation performance, as demonstrated by adsorption isotherms, breakthrough experiments, and density functional theory calculations. The design analogy between MOFs and highly stable MOCs may guide the synthesis of novel porous materials for challenging separation applications.

Ligand-Conformer-Induced Formation of Zirconium-Organic Framework for Methane Storage and MTO Product Separation

In pursuit of novel adsorbents with efficient adsorptive gas storage and separation capabilities remains highly desired and challenging. Although the documented zirconium-tricarboxylate-based metal-organic frameworks (MOFs) have displayed a variety of topologies encompassing underlying and geometry mismatch ones, the employed organic linkers are exclusively rigid and poorly presenting one type of conformation in the resultant structures. Herein, a used and semirigid tricarboxylate ligand of H₃ TATAB was judiciously selected to isolate a zirconium-based spe-MOF after the preliminary discovery of srl-MOF. Single-crystal X-ray diffraction reveals that the fully deprotonated TATAB linker in spe-MOF exhibits two distinct conformers, concomitant with popular O_h and rare S₆ symmetrical Zr₆ molecular building blocks, generating an unprecedented (3,3,12,12)-c nondefault topology. Specifically, the spe-MOF exhibits structurally higher complexity, hierarchical micropores, open metal sites free and rich electronegative groups on the pore surfaces, leading to relatively high methane storage capacity without considering the missing-linker defects and efficient MTO product separation performance.

Flexible Microporous Copper(II) Metal-Organic Framework toward the Storage and Separation of C1-C3 Hydrocarbons in Natural Gas

A flexible and robust microporous copper(II) metal-organic framework (MOF) based on a methyl-functionalized ligand, namely, [Cu₃(μ₃-OH)₂(L)₂(DMF)] (LIFM-ZZ-1; L = 2,2'-dimethyl-4,4'-biphenyldicarboxylic acid and DMF = N,N-dimethylformamide), was constructed. Its sorption performance for the separation of CH₄, C₂H₆, and C₃H₈ was investigated. LIFM-ZZ-1 showed a breathing behavior that led to a transition between large- and narrow-pore states. The sample also showed outstanding water stability. Gas adsorption experiments revealed that desolvated LIFM-ZZ-1 exhibited higher adsorption capacities for C₂H₆ and C₃H₈ (2.80 and 4.06 mmol·g^-1) than for CH₄ (0.39 mmol·g^-1) at 298 K and 1 bar. Breakthrough experiments showed that a CH₄/C₂H₆/C₃H₈ mixture was completely separated at 298 K, demonstrating the promising potential applications of this material for separating low contents of C2/C3 hydrocarbons from natural gas.

An investigation of affecting factors on MOF characteristics for biomedical applications: A systematic review

Metal-organic frameworks (MOFs) are a fascinating class of crystalline porous materials composed of metal ions and organic ligands. Due to their attractive properties, MOFs can potentially offer biomedical field applications, such as drug delivery and imaging. This study aimed to systematically identify the affecting factors on the MOF characteristics and their effects on structural and biological characteristics. An electronic search was performed in four databases containing PubMed, Scopus, Web of Science, and Embase, using the relevant keywords. After analyzing the studies, 20 eligible studies were included in this review. As a result, various factors such as additives and organic ligand can influence the size and structure of MOFs. Additives are materials that can compete with ligand and may affect the nucleation and growth processes and, consequently, particle size. The nature and structure of ligand are influential in determining the size and structure of MOF. Moreover, synthesis parameters like the reaction time and initial reagents ratio are critical factors that should be optimized to regulate the size and structure. Of note is that the nature of the ligand and using a suitable additive can control the porosity of MOF. The more extended ligands aid in forming large pores. The choice of metallic nodes and organic ligand, and the MOF concentration are important factors since they can determine toxicity and biocompatibility of the final structure. The physicochemical properties of MOFs, such as hydrophobicity, affect the toxicity of nanoparticles. An increase in hydrophobicity causes increased toxicity of MOF. The biodegradability of MOF, as another property, depends on the organic ligand and metal ion and environmental conditions like pH. Photocleavable ligands can be served for controlled degradation of MOFs. Generally, by optimizing these affecting factors, MOFs with desirable properties will be obtained for biomedical applications.

Metal-Organic Framework Materials for Light Hydrocarbon Separation

In practical industrial applications, the separation of light hydrocarbon mixtures is a very important technology. In recent years, some progress has been made in metal-organic framework materials for light hydrocarbon separation, but further research is still needed. This Minireivew presents a systematic discussion on the latest developments and separation mechanisms of metal-organic framework materials for C₂ and C₃ mixtures, discusses the problems faced by metal-organic framework materials in the study of light hydrocarbon adsorption and separation, and provides a reference for the design, preparation and process development of low-carbon hydrocarbon adsorption and separation materials in the future.

Cobalt-Based Metal-Organic Frameworks for Adsorption of CO2 and C2 Hydrocarbons: Effect of Auxiliary Ligands with Different Functional Groups

Recently, metal-organic frameworks (MOFs) have been investigated as potential materials for CO₂ capture and light hydrocarbon storage/separation due to their high porosity, large surface area, and tunable skeleton structures. In this work, the six cobalt-based MOFs 1-6 were successfully synthesized under solvothermal conditions by a mixed-ligand strategy. 1 and 2 have the same framework structure with a topology of {4²·5}₂{4⁴·5¹⁰·6⁷·7⁶·8}, while the structures of the 3-6 frameworks are the same with a topology of {4²·5}₂{4⁴·5¹⁰·6⁹·7⁴·8}. The adsorption properties of these MOFs for CO₂ and C₂ hydrocarbons were then investigated, and the effect of the functional groups was discussed. The results revealed that the introduction of amino and bromo groups could effectively strengthen the adsorption performance.

Efficient Purification of Ethylene from C2 Hydrocarbons with an C2H6/C2H2-Selective Metal-Organic Framework

The separation of ethylene (C₂H₄) from C₂ hydrocarbons is considered as one of the most difficult and important processes in the petrochemical industry. Heat-driven cryogenic distillation is still widely used in the C₂ hydrocarbons separation realms, which is an energy intensive process and takes up immense space. In response to a greener, more energy-efficient sustainable development, we successfully synthesized a multifunction microporous Mg-based MOF [Mg₂(TCPE)(μ₂-OH₂)(DMA)₂]·solvents (NUM-9) with C₂H₆/C₂H₂ selectivity based on a physical adsorption mechanism, and with outstanding stability; especially, it is stable up to 500 °C under an air atmosphere. NUM-9a (activated NUM-9) shows good performances in the separation of C₂H₆/C₂H₂ from raw ethylene gases. In addition, its actual separation potential is also examined by IAST and dynamic column breakthrough experiments. GCMC calculation results indicate that the unique structure of NUM-9a is primarily conducive to the selective adsorption of C₂H₆ and C₂H₂. More importantly, compared with C₂H₄, NUM-9a prefers to selectively adsorb C₂H₆ and C₂H₂ simultaneously, which makes NUM-9a as a sorbent have the capacity to separate C₂H₄ from C₂ hydrocarbon mixtures under mild conditions through a greener and energy-efficient separation strategy.

Molecularly Imprinted Porous Aromatic Frameworks for Molecular Recognition

Porous aromatic frameworks (PAFs) are an important class of porous materials that are well-known for their ultralarge surface areas and superb stabilities. Basically, PAF solids are constructed from periodically arranged phenyl fragments connected via C-C bonds (generally), which provide vast accessible surfaces that can be modified with functional groups and intrinsic pathways for rapid mass transfer. Molecular imprinting technology (MIT) is an effective method for producing binding sites with a specific geometry and size that complement a template object. This review focuses on the integration of MIT into PAF structures via state-of-the-art coupling chemistry to expand the application of porous materials in the fields of metal ion extraction (including the nuclear element uranium) and selective catalysis. Additionally, a concise outlook on the rational construction of molecularly imprinted porous aromatic frameworks is discussed in terms of developing next-generation porous materials for broader applications.

A robust Th-azole framework for highly efficient purification of C2H4 from a C2H4/C2H2/C2H6 mixture

Separation of C2H4 from C2H4/C2H2/C2H6 mixture with high working capacity is still a challenging task. Herein, we deliberately design a Th-metal-organic framework (MOF) for highly efficient separation of C2H4 from a binary C2H6/C2H4 and ternary C2H4/C2H2/C2H6 mixture. The synthesized MOF Azole-Th-1 shows a UiO-66-type structure with fcu topology built on a Th6 secondary building unit and a tetrazole-based linker. Such noticeable structure, is connected by a N,O-donor ligand with high chemical stability. At 100 kPa and 298 K Azole-Th-1 performs excellent separation of C2H4 (purity > 99.9%) from not only a binary C2H6/C2H4 (1:9, v/v) mixture but also a ternary mixture of C2H6/C2H2/C2H4 (9:1:90, v/v/v), and the corresponding working capacity can reach up to 1.13 and 1.34 mmol g-1, respectively. The separation mechanism, as unveiled by the density functional theory calculation, is due to a stronger van der Waals interaction between ethane and the MOF skeleton.

Optimizing Multivariate Metal-Organic Frameworks for Efficient C2H2/CO2 Separation

Adsorptive separation of acetylene (C₂H₂) from carbon dioxide (CO₂) promises a practical way to produce high-purity C₂H₂ required for industrial applications. However, challenges exist in the pore environment engineering of porous materials to recognize two molecules due to their similar molecular sizes and physical properties. Herein, we report a strategy to optimize pore environments of multivariate metal-organic frameworks (MOFs) for efficient C₂H₂/CO₂ separation by tuning metal components, functionalized linkers, and terminal ligands. The optimized material UPC-200(Al)-F-BIM, constructed from Al³⁺ clusters, fluorine-functionalized organic linkers, and benzimidazole terminal ligands, demonstrated the highest separation efficiency (C₂H₂/CO₂ uptake ratio of 2.6) and highest C₂H₂ productivity among UPC-200 systems. Experimental and computational studies revealed the contribution of small pore size and polar functional groups on the C₂H₂/CO₂ selectivity and indicated the practical C₂H₂/CO₂ separation of UPC-200(Al)-F-BIM.

Microporous Metal-Organic Framework with a Completely Reversed Adsorption Relationship for C2 Hydrocarbons at Room Temperature

As a new type of porous material, metal-organic frameworks (MOFs) have been widely studied in gas adsorption and separation, especially in C₂ hydrocarbons. Considering the stronger interaction between the unsaturated molecules and the metal sites, and the smaller molecular size of unsaturated molecules, the usual relationship of affinities and adsorption capacities among C₂ hydrocarbons in most common MOFs is C₂H₂ > C₂H₄ > C₂H₆. Herein, a unique microporous metal-organic framework, NUM-7a (activated NUM-7), with a completely reversed adsorption relationship for C₂ hydrocarbons (C₂H₆ > C₂H₄ > C₂H₂) has been successfully synthesized, which breaks the traditional concept of the adsorption relationship of MOFs for C₂ hydrocarbons. Based on this unique adsorption relationship, a green and simple one-step separation purification for a large amount of C₂H₄ can be expected to be achieved through the selective adsorption of C₂H₆. In addition, NUM-7a also shows good selectivities in C₂H₂/CO₂ and CO₂/CH₄.

Optimizing zirconium metal–organic frameworks through steric tuning for efficient removal of Cr2O72−

Three Zr-based MOFs are obtained through steric tuning. The synergistic effect between porous structures and functional groups enhanced the adsorption capacity and adsorption rate for Cr₂O₇²⁻.

Minute/instant-MOFs: versatile, high quality, ultrafast, scalable production at room temperature

The material demand for metal organic framework (MOF) production necessitates advance in their expedient and scalable synthesis that can operate at room temperature which would be pivotal for chemical industry. Toward that end, M-Hoba, where M = divalent metal acetate and Hoba = 4,4'-oxybis(benzoic acid), can now be prepared in minutes via a controlled dissolution-crystallization route with divalent metal acetate as a precursor. MOFs prepared by this strategy were highly crystalline. This synthetic method was also applied successfully to the synthesis of a MOF-5 series (Cu) and Cu-BTC to highlight its generality. This method can move traditional MOF synthesis from the laboratory scale to the industrial scale.