A Critical Review on Energy Conversion and Environmental Remediation of Photocatalysts with Remodeling Crystal Lattice, Surface, and Interface

Direct observation of carrier migration in heterojunctions to discuss the p-n and direct Z-scheme heterojunctions

Type II p-n heterojunction and direct Z-scheme heterojunction are identical staggered band alignments, but were reported ambiguously in many composite photocatalysts because their carriers migrate in opposite directions. In this research, metal oxides CuO, NiO and Co₃O₄-based heterojunctions with Na_0.9Mg_0.45Ti_3.55O₈(NMTO) were synthesized via a simple hydrothermal method. The CuO/NMTO heterojunction was demonstrated as a direct Z-scheme heterojunction, whereas the NiO/NMTO and Co₃O₄/NMTO heterojunctions showed type II p-n band alignment, distinguished by the direct observation of carrier migration under light illumination, and confirmed by the x-ray photoelectron spectroscopy, Mott-Schottky measurements, ultraviolet photoelectron spectra and capture experiments. These all heterojunctions enjoyed better photocatalytic performance to degrade methylene blue and antibiotics (Enrofloxacin, Metronidazole and tetracycline) than the pure NMTO, attributed to their effective separation of the photoinduced electron-hole pairs owing to the staggered band alignment. Prominently, the NiO/NMTO and Co₃O₄/NMTO p-n heterojunctions exhibited superior degradation ability to the CuO/NMTO Z-scheme heterojunction. The initial relative Fermi position of two semiconductors is the prerequisite to determine whether the p-n heterojunction or direct Z-scheme heterojunction is built because the electrons diffuse from one semiconductor with a higher Fermi level to another with a lower Fermi level while the holes diffuse reversely until a united Fermi level when they combine. The built-in electric field at the heterojunction interface is determined by the difference in the initial Fermi levels or work functions of two semiconductors, regulating the separation ability of photogenerated electrons and holes to affect the photocatalytic performance. Thus, the high difference in the initial Fermi levels of semiconductors is crucial in the development of heterojunctions with staggered band alignment to obtain high performance in photocatalytic reactions.

One-Step Coprecipitation Synthesis of BiOClxBr1-x Photocatalysts Decorated with CQDs at Room Temperature with Enhanced Visible-Light Response

BiOCl_xBr_1-x (0 ≤ x ≤ 1) solid solutions were synthesized at room temperature by one-step coprecipitation. Relative proportions of halogens in the anion layer were regulated, and thus, the band gap of BiOCl_xBr_1-x could be adjusted to suitable values to enhance the photocatalytic reaction. BiOCl_xBr_1-x exhibited enhanced visible-light response and higher photocatalytic activity in degrading rhodamine B (RhB) compared with individual BiOCl or BiOBr. Especially, BiOCl_0.5Br_0.5 showed the highest photocatalytic activity. Comparative tests showed that within 36 min the degradation rates of RhB upon BiOBr, BiOCl, and BiOCl_0.5Br_0.5 were 55.66, 24.03, and 94.91%, respectively. BiOCl_0.5Br_0.5 was further decorated with carbon quantum dots (CQDs) to promote the separation of photogenerated charge carriers. The photocatalytic activity was considerably enhanced by moderate doping of CQDs, and the degradation rate of RhB reached nearly 100% within 18 min upon 3CQDs-BiOCl_0.5Br_0.5 (the loading content of CQDs was 0.42 wt %). Active-species-trapping tests confirmed that h⁺ is the primary active species for photocatalytic degradation of RhB, whereas ^•O₂^- and e^- were the secondary ones. The synergistic effects of the band structure adjustment and CQD decoration on the photocatalytic activity were mainly expounded as the enhanced separation of photogenerated charge carriers and optimal redox potentials. In addition, the reuse and service life of the catalysts were analyzed. After five cycles, the photocatalytic activity still remained over 95%.

Catalytic radiosensitization: Insights from materials physicochemistry

Radiotherapy is indispensable in clinical cancer treatment, but because both tumor and normal tissues have similar sensitivity to X-rays, their clinical curative effect is intrinsically limited. Advanced nanomaterials and nanotechnologies have been developed for radiotherapy sensitization, typically employing high atomic number (high-Z) materials to enhance the energy deposition of X-rays in tumor tissues, but the efficiency is largely limited by the toxicity of heavy metals. A new and promising approach for radiosensitization is catalytic radiosensitization, which takes advantage of the catalytic activity of nanomaterials triggered by radiation. The efficiency of catalytic radiosensitization can be greatly enhanced by electron modulation and energy conversion of nanocatalysts upon X-ray irradiation, further enhancing the clinical curative effect. In this review, we highlight the challenges and opportunities in cancer radiosensitization, discuss novel approaches to catalytic radiosensitization, and finally describe the development of catalytic radiosensitization based on an in-depth understanding of radio-nano interactions and catalysis-biological interactions.

Fabrication and Characterization of Nanostructured Rock Wool as a Novel Material for Efficient Water-Splitting Application

Rock wool (RW) nanostructures of various sizes and morphologies were prepared using a combination of ball-mill and hydrothermal techniques, followed by an annealing process. Different tools were used to explore the morphologies, structures, chemical compositions and optical characteristics of the samples. The effect of initial particle size on the characteristics and photoelectrochemical performance of RW samples generated hydrothermally was investigated. As the starting particle size of ball-milled natural RW rises, the crystallite size of hydrothermally formed samples drops from 70.1 to 31.7 nm. Starting with larger ball-milled particle sizes, the nanoparticles consolidate and seamlessly combine to form a continuous surface with scattered spherical nanopores. Water splitting was used to generate photoelectrochemical hydrogen using the samples as photocatalysts. The number of hydrogen moles and conversion efficiencies were determined using amperometry and voltammetry experiments. When the monochromatic wavelength of light was increased from 307 to 460 nm for the manufactured RW>0.3 photocatalyst, the photocurrent density values decreased from 0.25 to 0.20 mA/mg. At 307 nm and +1 V, the value of the incoming photon-to-current efficiency was ~9.77%. Due to the stimulation of the H+ ion rate under the temperature impact, the Jph value increased by a factor of 5 when the temperature rose from 40 to 75 °C. As a result of this research, for the first time, a low-cost photoelectrochemical catalytic material is highlighted for effective hydrogen production from water splitting.

All-experimental analysis of doubly resonant sum-frequency generation spectra for Franck–Condon and Herzberg–Teller vibronic modes

The transform technique applied to the analysis of doubly resonant sum-frequency generation (DR-SFG) spectra is extended to include Herzberg–Teller (HT) vibronic modes. The experimentally measured overlap spectral function generates all the energy resonant amplitudes of the DR-SFG excitation function for both Franck–Condon (FC) and HT modes. When FC modes dominate the DR-SFG spectra, a methodology is provided to perform efficient curve fitting and orientation analysis in order to extract FC activities of the various vibration modes from experimental spectra with the help of a molecular model. Determination of the FC or HT natures of the vibration modes from DR-SFG data is also shown to be possible through their visible line shapes with an appropriate choice of polarizations. As an example, experimental DR-SFG data suggest that a known HT-active mode in the vibronic structure of Rhodamine 6G monomers exhibits a FC behavior in molecular aggregates.

Tuneable Phase, Morphology, and Performance of Bismuth Oxyhalide Photocatalysts via Microwave-Assisted Synthesis

In this study, a facile microwave-assisted synthesis approach was used to produce a series of bismuth oxyhalide photocatalysts, with systematic changes in synthesis pH between 1 and 14 allowing control over a broad range of material properties and characteristics. Detailed structural and morphological investigations with powder X-ray diffraction (PXRD), Rietveld refinements, pair distribution function (PDF) analysis, and scanning electron microscopy (SEM) show that thin particles of BiOCl, BiOBr, Bi24O31Cl10, and Bi24O31Br10 were selectively produced, with progressive changes in morphology, facet dominance, and phase as a function of pH. The impact of these changes on photocatalytic performance was evaluated by studying the aerobic oxidation of benzylamine to N-benzylidenebenzylamine, with all materials exhibiting photocatalytic abilities under UV or blue light. While a combination of material properties and characteristics influenced the photocatalytic performance, certain factors such as surface area, facet dominance, amorphous content, and band gap were found to have a larger impact on the photocatalytic yield. Overall, this study demonstrates the possibilities of phase, morphology, and performance of bismuth oxyhalide photocatalysts over the entire pH range, produced using a fast and facile microwave-assisted synthesis technique as an alternative to the more widely applied hydrothermal synthesis approach. Additionally, the detailed structural and morphological investigations of the materials contribute to a greater understanding of bismuth oxyhalide photocatalysts in general, while also highlighting some of the most desirable properties for improved photocatalytic performance of these materials.

Surface Structures of Fe-TiO2 Photocatalysts for NO Oxidation

Commercial rutile TiO2 particles capped with Al2O3 and ZrO2 layers, which are widely used in white pigments, can serve as a starting material for the fabrication of visible light-responsive photocatalysts toward gas-phase NO oxidation. The as-received TiO2 with iron impurities exhibited reduced photocatalytic activity, and the activity was boosted by the deposition of additional iron comparable in quantity to the intrinsic iron impurity level. Analyses using X-ray photoelectron spectroscopy, time-of-flight secondary ion mass spectroscopy, and low-energy ion scattering spectroscopy revealed that the deposited iron and intrinsic impurity iron are dissimilar in terms of location, oxidation states, and interaction with TiO2. This suggests that tracking the structure and impurity levels of photocatalyst elements can be crucial for understanding structure-activity relationships of real catalysts.

2D/3D S-scheme heterojunction of carbon nitride/iodine-deficient bismuth oxyiodide for photocatalytic hydrogen production and bisphenol A degradation

A novel 2D/3D S-scheme carbon nitride/iodine-deficient bismuth oxyiodide (g-C₃N₄/BiO_1.2I_0.6) heterojunction was constructed for the first time by calcining a mixture of g-C₃N₄ nanosheets and flower-like BiOI. Irradiated by visible light, this g-C₃N₄/BiO_1.2I_0.6 heterojunction exhibited excellent photocatalytic hydrogen production and BPA degradation activity with high cycle stability. In particular, the photocatalytic activity of 0.2-C₃N₄/BiO_1.2I_0.6 could reach 1402.7 μmol g^-1 h^-1 (hydrogen production rate) and 0.01155 min^-1 (apparent rate of bisphenol A degradation), which were 3.5 and 3.2 times that of g-C₃N₄ respectively. The remarkable photocatalytic performance was due to the efficient charge separation of g-C₃N₄/BiO_1.2I_0.6 and the formation of S-scheme heterojunction, which maintained strong photocatalytic reduction and oxidation potentials. Noticeably, the charge density difference and band offsets of the g-C₃N₄/BiO_1.2I_0.6 were calculated. The results revealed that a built-in electric field (IEF) was created. The values of the valence band offset (ΔE_VBO) and the conduction band offset (ΔE_CBO) were -0.84 and -1.27 eV, respectively, which further demonstrated the formation of S-scheme photocatalytic charge transfer mechanism.

Precursor Heterogeneity Driven Mo-Te Nanoparticle Structural Diversification for Cancer Photo-Theranostics

Chemical reactions between homogeneous precursors are typically used to synthesize monodisperse nanoparticles with well-controlled size and morphology. It is difficult to predict the evolved nanostructures when using two heterogeneous precursors. In this study, three types of Mo-Te nanoparticles shaped like leaves, spindles, and rice grains (denoted respectively as nanoleaf, nanospindle, and nanorice) were obtained from dextrose-mediated proton-coupled electron transfer reaction between the solid polyoxomolybdate (POM) and the ionic tellurite anion as precursors. All produced nanoparticles had excellent optical absorption in the ultraviolet(UV)-visible(Vis)-near-infrared(NIR) regions, with only slight deviations among them. After confirming nanoparticles' photothermal conversion and photocatalytic activity at multiple wavelengths, the Mo-Te nanorice was tested as a potential agent for cancer treatment due to its minimum toxicity, excellent colloidal stability, and intrinsic anticancer effect. Excellent treatment efficacy and clearance were confirmed in vitro and in vivo. Due to their photoacoustic imaging capability, the injection of pristine nanoparticles could also realize phototheranostics without using additional drugs, probes, or photosensitizers.

Recent Progress in the Synthesis and Applications of Composite Photocatalysts: A Critical Review

Photocatalysis is an advanced technique that transforms solar energy into sustainable fuels and oxidizes pollutants via the aid of semiconductor photocatalysts. The main scientific and technological challenges for effective photocatalysis are the stability, robustness, and efficiency of semiconductor photocatalysts. For practical applications, researchers are trying to develop highly efficient and stable photocatalysts. Since the literature is highly scattered, it is urgent to write a critical review that summarizes the state-of-the-art progress in the design of a variety of semiconductor composite photocatalysts for energy and environmental applications. Herein, a comprehensive review is presented that summarizes an overview, history, mechanism, advantages, and challenges of semiconductor photocatalysis. Further, the recent advancements in the design of heterostructure photocatalysts including alloy quantum dots based composites, carbon based composites including carbon nanotubes, carbon quantum dots, graphitic carbon nitride, and graphene, covalent-organic frameworks based composites, metal based composites including metal carbides, metal halide perovskites, metal nitrides, metal oxides, metal phosphides, and metal sulfides, metal-organic frameworks based composites, plasmonic materials based composites and single atom based composites for CO₂ conversion, H₂ evolution, and pollutants oxidation are discussed elaborately. Finally, perspectives for further improvement in the design of composite materials for efficient photocatalysis are provided.

Renewable biomass-derived carbon-supported g-C3N4 doped with Ag for enhanced photocatalytic reduction of CO2

Constructing noble metal-doped g-C₃N₄/carbon composites is a feasible route to overcome the intrinsic drawbacks of pristine g-C₃N₄ for enhanced activity of CO₂ photoreduction. Herein, a novel Ag-doped g-C₃N₄/biomass-derived carbon composite with hollow bird's nest-like (Ag-g-C₃N₄/BN-C) is designed and prepared via a simple yet effective one-step pyrolysis method. In the Ag-g-C₃N₄/BN-C, the highly-dispersed Ag nanoparticles (20-30 nm) with the surface plasmon resonance (SPR) effect act as a significant cocatalyst not only to efficiently trap the photogenerated electrons from g-C₃N₄ to boost the separation of photogenerated electron-hole pairs but also to produce additional active "hot electrons", while the conductive quasi-spherical hollow structure of BN-C doubles the specific surface area with multiple reflections of light, providing abundant active sites and more utilization efficiency of light energy. As a result, the Ag-g-C₃N₄/BN-C exhibits a remarkably enhanced CO evolution rate of 33.3 μmol·g^-1·h^-1 without addition of any sacrificial reagents and photosensitizers, superior to those of both the pristine g-C₃N₄ and many reported g-C₃N₄-based counterparts. The findings of this work demonstrate a good indication for integrating g-C₃N₄ with SPR-dependence noble metal and renewable biomass-derived carbon for enhanced CO₂ photoreduction, which may be extended to modify other semiconductor materials for more photocatalytic applications with enhanced activity.

Enhanced photocatalytic reduction of hexavalent chromium by using piezo-photo active calcium bismuth oxide ferroelectric nanoflakes

The working mechanism of CBO nanoflakes for the reduction of Cr(vi): (a) in the presence of visible light only, and (b) the combined effect of visible light and ultrasonic vibrations.

Metal‐Organic Framework Derived Carbon-Encapsulated Hollow CuO/Cu2O Heterostructure Heterohedron as an Efficient Electrocatalyst for Hydrogen Evolution Reaction

It is of pivotal significance to probe highly efficient, cost-effective and low-cost catalysts for hydrogen evolution reaction. Herein, closely packed carbon-encapsulated CuO/Cu2O heterohedron with heterojunction structure is reported that combines...

Conducting polymers/zinc oxide-based photocatalysts for environmental remediation: a review

The accessibility to clean water is essential for humans, yet nearly 250 million people die yearly due to contamination by cholera, dysentery, arsenicosis, hepatitis A, polio, typhoid fever, schistosomiasis, malaria, and lead poisoning, according to the World Health Organization. Therefore, advanced materials and techniques are needed to remove contaminants. Here, we review nanohybrids combining conducting polymers and zinc oxide for the photocatalytic purification of waters, with focus on in situ polymerization, template synthesis, sol-gel method, and mixing of semiconductors. Advantages include less corrosion of zinc oxide, less charge recombination and more visible light absorption, up to 53%.

Recent Advances in Plasmonic Photocatalysis Based on TiO2 and Noble Metal Nanoparticles for Energy Conversion, Environmental Remediation, and Organic Synthesis

Plasmonic photocatalysis has emerged as a prominent and growing field. It enables the efficient use of sunlight as an abundant and renewable energy source to drive a myriad of chemical reactions. For instance, plasmonic photocatalysis in materials comprising TiO₂ and plasmonic nanoparticles (NPs) enables effective charge carrier separation and the tuning of optical response to longer wavelength regions (visible and near infrared). In fact, TiO₂ -based materials and plasmonic effects are at the forefront of heterogeneous photocatalysis, having applications in energy conversion, production of liquid fuels, wastewater treatment, nitrogen fixation, and organic synthesis. This review aims to comprehensively summarize the fundamentals and to provide the guidelines for future work in the field of TiO₂ -based plasmonic photocatalysis comprising the above-mentioned applications. The concepts and state-of-the-art description of important parameters including the formation of Schottky junctions, hot electron generation and transfer, near field electromagnetic enhancement, plasmon resonance energy transfer, scattering, and photothermal heating effects have been covered in this review. Synthetic approaches and the effect of various physicochemical parameters in plasmon-mediated TiO₂ -based materials on performances are discussed. It is envisioned that this review may inspire and provide insights into the rational development of the next generation of TiO₂ -based plasmonic photocatalysts with target performances and enhanced selectivities.

Tailoring of electronic and surface structures boosts exciton-triggering photocatalysis for singlet oxygen generation

Arising from reduced dielectric screening, excitonic effects should be taken into account in ultrathin two-dimensional photocatalysts, and a significant challenge is achieving nontrivial excitonic regulation. However, the effect of structural modification on the regulation of the excitonic aspect is at a comparatively early stage. Herein, we report unusual effects of surface substitutional doping with Pt on electronic and surface characteristics of atomically thin layers of Bi₃O₄Br, thereby enhancing the propensity to generate ¹O₂ Electronically, the introduced Pt impurity states with a lower energy level can trap photoinduced singlet excitons, thus reducing the singlet-triplet energy gap by ∼48% and effectively facilitating the intersystem crossing process for efficient triplet excitons yield. Superficially, the chemisorption state of O₂ causes the changes in the magnetic moment (i.e., spin state) of O₂ through electron-mediated triplet energy transfer, resulting a spontaneous spin-flip process and highly specific ¹O₂ generation. These traits exemplify the opportunities that the surface engineering provides a unique strategy for excitonic regulation and will stimulate more research on exciton-triggering photocatalysis for solar energy conversion.

Recent advances in photocatalytic removal of airborne pathogens in air

The abatement of airborne pathogens such as bacteria, viruses, and fungi has become an important goal of air-quality management. Efficient and effective treatment techniques such as photocatalysis are essential for disinfection of airborne microorganisms. This review focuses on recent advances in the formulation and development of photocatalytic disinfection, design of efficient photocatalysts, choice of photocatalytic reactor, removal and/or disinfection mechanisms, and the role of reactive ion species. Data from recent studies are analyzed to accurately assess the efficacy of such disinfection approaches. This review also highlights the application of innovative materials in individual and combined abatement systems against airborne bacterial, viral, and fungal pathogens. We discuss the efficiency and benefits presented by such systems, address the challenges, and provide a perspective for future research.

Layer-by-Layer-Stabilized Plasmonic Gold-Silver Nanoparticles on TiO2: Towards Stable Solar Active Photocatalysts

To broaden the activity window of TiO₂, a broadband plasmonic photocatalyst has been designed and optimized. This plasmonic ‘rainbow’ photocatalyst consists of TiO₂ modified with gold–silver composite nanoparticles of various sizes and compositions, thus inducing a broadband interaction with polychromatic solar light. However, these nanoparticles are inherently unstable, especially due to the use of silver. Hence, in this study the application of the layer-by-layer technique is introduced to create a protective polymer shell around the metal cores with a very high degree of control. Various TiO₂ species (pure anatase, PC500, and P25) were loaded with different plasmonic metal loadings (0–2 wt %) in order to identify the most solar active composite materials. The prepared plasmonic photocatalysts were tested towards stearic acid degradation under simulated sunlight. From all materials tested, P25 + 2 wt % of plasmonic ‘rainbow’ nanoparticles proved to be the most promising (56% more efficient compared to pristine P25) and was also identified as the most cost-effective. Further, 2 wt % of layer-by-layer-stabilized ‘rainbow’ nanoparticles were loaded on P25. These layer-by-layer-stabilized metals showed superior stability under a heated oxidative atmosphere, as well as in a salt solution. Finally, the activity of the composite was almost completely retained after 1 month of aging, while the nonstabilized equivalent lost 34% of its initial activity. This work shows for the first time the synergetic application of a plasmonic ‘rainbow’ concept and the layer-by-layer stabilization technique, resulting in a promising solar active, and long-term stable photocatalyst.

Comparison of the photoactivity of several semiconductor oxides in floating aerogel and suspension systems towards the reduction of Cr(VI) under visible light

A massive amount of research has been done over the last three decades to develop photoactive materials which could be suitable for real-world use in water remediation sector. Water-floating photocatalysts could be one of the best options due to their technological characteristics in terms of efficiency and reasonability including a high oxygenation of the photocatalyst surface, a fully sunlight irradiation, easy recovery and reuse. In the present study, aerogel water-floating based materials were fabricated using poly(vinyl alcohol) and polyvinylidene fluoride as a polymer platform, and loaded with different semiconductors such as g-C₃N₄, MoO₃, Bi₂O₃, Fe₂O₃ or WO₃. The photocatalytic efficiencies of aerogel floating materials and the suspension of above-mentioned semiconductors were compared evaluating the photoreduction of Cr(VI) under visible light (λ > 420 nm). The results showed that Fe₂O₃ suspension was the most efficient but the slowest in floating system. On the contrary, g-C₃N₄ exhibited a good performance in suspension system, and on top of that it was very effective in floating system, wherein it ensures a total reduction of 10 ppm-Cr(VI) to Cr(III) within 20 min.

Gradient Hydrogen Migration Modulated with Self-Adapting S Vacancy in Copper-Doped ZnIn2S4 Nanosheet for Photocatalytic Hydrogen Evolution

It is a challenge to regulate charge flow synergistically at the atomic level to modulate gradient hydrogen migration (H migration) for boosting photocatalytic hydrogen evolution. Herein, a self-adapting S vacancy (Vs) induced with atomic Cu introduction into ZnIn₂S₄ nanosheets was fabricated elaborately, which can tune charge separation and construct a gradient channel for H migration. Detailed experimental results and theoretical simulations uncover the behavior mechanism of Vs generation with Cu introduction after substituting a Zn atom tendentiously. Cu-S bond shrinkage and Zn-S bond distortion are presented around Vs areas. Besides, Vs induced by Cu introduction lowers the internal electric field to restrain electron transmission between layers, which are enriched on the Vs area because of the lower surface electrostatic potential. Atomic Cu and Vs show a synergistic effect for regulating regional charge separation due to the Cu dopant being a hole trap and Vs being an electron trap. The channels for H migration with gradient ΔG_H⁰ are constructed by different S atom sites, which are modulated by Vs. Gradient H migration driven by a photothermal effect occurs on an identical surface without striding across a heterogeneous interface, which is a valid pathway with lower resistance for boosting H₂ release. Ultimately, 5 mol % Cu confined in ZnIn₂S₄ nanosheets achieves an optimum photocatalytic hydrogen evolution activity of 9.8647 mmol g^-1 h^-1, which is 14.8 times higher than 0.6640 mmol g^-1 h^-1 for ZnIn₂S₄, and apparent quantum efficiency reaches 37.11% at 420 nm. This work demonstrates the behavior mechanism of atomic substitution and provides cognition for hydrogen evolution mechanism deeply.

Effect of Morphology and Plasmonic on Au/ZnO Films for Efficient Photoelectrochemical Water Splitting

To improve photoelectrochemical (PEC) water splitting, various ZnO nanostructures (nanorods (NRs), nanodiscs (NDs), NRs/NDs, and ZnO NRs decorated with gold nanoparticles) have been manufactured. The pure ZnO nanostructures have been synthesized using the successive ionic-layer adsorption and reaction (SILAR) combined with the chemical bath deposition (CBD) process at various deposition times. The structural, chemical composition, nanomorphological, and optical characteristics have been examined by various techniques. The SEM analysis shows that by varying the deposition time of CBD from 2 to 12 h, the morphology of ZnO nanostructures changed from NRs to NDs. All samples exhibit hexagonal phase wurtzite ZnO with polycrystalline nature and preferred orientation alongside (002). The crystallite size along (002) decreased from approximately 79 to 77 nm as deposition time increased from 2 to 12 h. The bandgap of ZnO NRs was tuned from 3.19 to 2.07 eV after optimizing the DC sputtering time of gold to 4 min. Via regulated time-dependent ZnO growth and Au sputtering time, the PEC performance of the nanostructures was optimized. Among the studied ZnO nanostructures, the highest photocurrent density (Jph) was obtained for the 2 h ZnO NRs. As compared with ZnO NRs, the Jph (7.7 mA/cm2) of 4 min Au/ZnO NRs is around 50 times greater. The maximum values of both IPCE and ABPE are 14.2% and 2.05% at 490 nm, which is closed to surface plasmon absorption for Au NPs. There are several essential approaches to improve PEC efficiency by including Au NPs into ZnO NRs, including increasing visible light absorption and minority carrier absorption, boosting photochemical stability, and accelerating electron transport from ZnO NRs to electrolyte carriers.

State-of-the-art and prospects of Zn-containing layered double hydroxides (Zn-LDH)-based materials for photocatalytic water remediation

With the rapid worldwide development of industry and human activities, increasing amounts of multifarious contaminants have significantly threatened environmental ecosystems and human health. Solar photocatalytic decontamination, as an environmentally friendly technology, has been regarded as a good approach to eliminate water pollutants. To date, various photocatalysts have been developed for the purpose of water remediation. Zn-containing layered double hydroxides (Zn-LDHs) and their derivatives are promising candidates due to their suitable band edge positions (oxidation-reduction potentials) for high photocatalytic performances, flexible properties derived from adjustable components and tailorable electronic structures, chemical stabilities, and low toxicities. This review focuses on the fabrication and modification of Zn-LDHs and their photocatalytic applications for the elimination of contaminants in water, including the degradation of toxic organic pollutants, transfer of hazardous heavy metals to lower toxicity heavy metals, and bacterial inactivation. The mechanisms involved in the photocatalytic processes are also thoroughly reviewed. Finally, the emerging scientific and engineering opportunities and challenges in environmental photocatalysis are presented. This review provides basic insights into the construction of Zn-LDH-based materials with high photocatalytic activities and new perspectives on their applications for the photocatalytic elimination of contaminants, which is helpful for the development of photocatalysis for environmental remediation from the lab to industry.

Quantum Dot Photocatalysts for Organic Transformations

Quantum dots (QDs) with tunable photo-optical properties and colloidal nature are ideal for a wide range of photocatalytic reactions. In particular, QD photocatalysts for organic transformations can provide new and effective synthetic routes to high value-added molecules under mild conditions. In this Perspective, we discuss the advances of employing QDs for visible-light-driven organic transformations categorized into net reductive reactions, net oxidative reactions, and redox neutral reactions. We then provide our outlook for potential future directions in the field: nanostructure engineering to improve charge separation efficiencies, ligand shell engineering to optimize overall catalyst performance, in situ comprehensive studies to delineate underlying reaction mechanisms, and laboratory automation with the assistance of modern computing techniques to revolutionize the reaction optimization process.

Enhancing Singlet Oxygen Photocatalysis with Plasmonic Nanoparticles

Photocatalysts able to trigger the production of singlet oxygen species are the topic of intense research efforts in organic synthesis. Yet, challenges still exist in improving their activity and optimizing their use. Herein, we exploited the benefits of plasmonic nanoparticles to boost the activity of such photocatalysts via an antenna effect in the visible range. We synthesized silica-coated silver nanoparticles (Ag@SiO₂ NPs), with silica shells which thicknesses ranged from 7 to 45 nm. We showed that they served as plasmonically active supports for tris(bipyridine)ruthenium(II), [Ru(bpy)₃]²⁺, and demonstrated an enhanced catalytic activity under white light-emitting diode (LED) irradiation for citronellol oxidation, a key step in the commercial production of rose oxide fragrance. A maximum enhancement of the plasmon-mediated reactivity of approximately 3-fold was observed with a 28 nm silica layer along with a 4-fold enhancement in the emission intensity of the photocatalyst. Using electron energy loss spectroscopy (EELS) and boundary element method simulations, we mapped the decay of the plasmonic signal around the Ag core and provided a rationale for the observed catalytic enhancement. This work provides a systematic analysis of the promising properties of plasmonic NPs used as catalysis-enhancing supports for common homogeneous photocatalysts and a framework for the successful design of such systems in the context of organic transformations.

Plasmonic semiconductor photocatalyst: Non-stoichiometric tungsten oxide

Semiconductor photocatalysis has attracted increasing attention due to its potential application in solving the problems related to energy crisis and environmental pollution. As a typical plasmonic semiconductor, non-stoichiometric tungsten oxide (WO_3-X) has invoked significant interest for its unique property and excellent photocatalytic performance. In this review, we briefly introduce the fundamental properties of the WO_3-x, and then summarize the synthesis methods such as solvothermal reaction, solid phase reduction and exfoliation treatment, together with the modification strategies such as doping and constructing homo-/hetero-junctions. Additionally, we emphasize the practical applications of WO_3-x in hydrogen evolution, nitrogen fixation, carbon dioxide reduction, and pollutant degradation. Finally, comprehensive conclusions and perspectives on the fabrication of WO_3-x photocatalyst leading to satisfactory performance are given as well.

Photocatalytic Degradation of Plastic Waste: A Mini Review

Plastic waste becomes an immediate threat to our society with ever-increasing negative impacts on our environment and health by entering our food chain. Sunlight is known to be the natural energy source that degrades plastic waste at a very slow rate. Mimicking the role of sunlight, the photocatalytic degradation process could significantly accelerate the degradation rate thanks to the photocatalyst that drastically facilitates the photochemical reactions involved in the degradation process. This mini review begins with an introduction to the chemical compositions of the common plastic waste. The mechanisms of photodegradation of polymers in general were then revisited. Afterwards, a few photocatalysts were introduced with an emphasis on titanium dioxide (TiO2), which is the most frequently used photocatalyst. The roles of TiO2 photocatalyst in the photodegradation process were then elaborated, followed by the recent advances of photocatalytic degradation of various plastic waste. Lastly, our perspectives on the future research directions of photocatalytic plastic degradation are present. Herein, the importance of catalytic photodegradation is emphasized to inspire research on developing new photocatalysts and new processes for decomposition of plastic waste, and then to increase its recycling rate particularly in the current pandemic with the ever-increasing generation of plastic waste.

Improving Photoelectrochemical Activity of ZnO/TiO2 Core–Shell Nanostructure through Ag Nanoparticle Integration

In solar energy harvesting using solar cells and photocatalysts, the photoexcitation of electrons and holes in semiconductors is the first major step in the solar energy conversion. The lifetime of carriers, a key factor determining the energy conversion and photocatalysis efficiency, is shortened mainly by the recombination of photoexcited carriers. We prepared and tested a series of ZnO/TiO2-based heterostructures in search of designs which can extend the carrier lifetime. Time-resolved photoluminescence tests revealed that, in ZnO/TiO2 core–shell structure the carrier lifetime is extended by over 20 times comparing with the pure ZnO nanorods. The performance improved further when Ag nanoparticles were integrated at the ZnO/TiO2 interface to construct a Z-scheme structure. We utilized these samples as photoanodes in a photoelectrochemical (PEC) cell and analyzed their solar water splitting performances. Our data showed that these modifications significantly enhanced the PEC performance. Especially, under visible light, the Z-scheme structure generated a photocurrent density 100 times higher than from the original ZnO samples. These results reveal the potential of ZnO-Ag-TiO2 nanorod arrays as a long-carrier-lifetime structure for future solar energy harvesting applications.

An Interface Optimization Strategy for g-C3N4-Based S-Scheme Heterojunction Photocatalysts

Graphitic carbon nitride (CN) has attracted much attention in photocatalytic fields due to its unique electronic band structure. However, the rapid recombination of photogenerated carriers severely inhibits its catalytic activity. The heterojunction structure has been widely confirmed to significantly improve the photocatalytic activity of CN through the formed interface structure. However, researchers often give attention to the band matching and conductivity of the cocatalyst, while the importance of the interface as a migration channel for photogenerated carriers is often overlooked. In this work, we adopt the strategy of morphology engineering to regulate the morphology of the CN photoactive component so as to achieve the interface optimization of the traditional heterojunction structure. The photocatalytic degradation experiment of rhodamine B shows that compared with the traditional CeO₂@CN heterojunction structure, the photocatalytic activity of the interface-optimized CeO₂/CN is increased by more than 20%. The following points could be used to explain the improvement of photocatalytic activity: (I) the formed S-scheme heterojunction structure, which inhibits the recombination of useful electrons and holes but expedites the recombination of relatively useless electrons and holes, (II) the increased interface area, which provides more carrier migration channels, and (III) the reduced interface contact resistance, which facilitates the separation and migration of photogenerated carriers. Furthermore, the interface optimization of the traditional Al₂O₃@CN and Fe₂O₃@CN heterojunction structures also achieved consistent results. This shows that the strategy in this work is a universal method for interface optimization, which provides potential alternative for further improving the catalytic activity of other heterojunction composites.

A review on vertical and lateral heterostructures of semiconducting 2D-MoS2 with other 2D materials: a feasible perspective for energy conversion

Fossil fuels as a double-edged sword are essential to daily life. However, the depletion of fossil fuel reservoirs has increased the search for alternative renewable energy sources to procure a more sustainable society. Accordingly, energy production through water splitting, CO₂ reduction and N₂ reduction via photocatalytic and electrocatalytic pathways is being contemplated as a greener methodology with zero environmental pollution. Owing to their atomic-level thickness, two-dimensional (2D) semiconductor catalysts have triggered the reawakening of interest in the field of energy and environmental applications. Among them, following the unconventional properties of graphene, 2D MoS₂ has been widely investigated due to its outstanding optical and electronic properties. However, the photo/electrocatalytic performance of 2D-MoS₂ is still unsatisfactory due to its low charge carrier density. Recently, the development of 2D/2D heterojunctions has evoked interdisciplinary research fascination in the scientific community, which can mitigate the shortcomings associated with 2D-MoS₂. Following the recent research trends, the present review covers the recent findings and key aspects on the synthetic methods, fundamental properties and practical applications of semiconducting 2D-MoS₂ and its heterostructures with other 2D materials such as g-C₃N₄, graphene, CdS, TiO₂, MXene, black phosphorous, and boron nitride. Besides, this review details the viable application of these materials in the area of hydrogen energy production via the H₂O splitting reaction, N₂ fixation to NH₃ formation and CO₂ reduction to different value-added hydrocarbons and alcohol products through both photocatalysis and electrocatalysis. The crucial role of the interface together with the charge separation principle between two individual 2D structures towards achieving satisfactory activity for various applications is presented. Overall, the current studies provide a snapshot of the recent breakthroughs in the development of various 2D/2D-based catalysts in the field of energy production, delivering opportunities for future research.

Defect-Mediated Slow Carrier Recombination and Broad Photoluminescence in Non-Metal-Doped ZnIn2S4 Nanosheets for Enhanced Photocatalytic Activity

Elemental doping has already been established to be one of the most effective approaches for band-gap engineering and controlled material response for improved photocatalytic activity. Herein atomically thin ZnIn₂S₄ (ZIS) nanosheets were doped with O and N separately, and the effects of doping were spectroscopically investigated for photocatalytic H₂ evolution. Steady-state photoluminescence studies revealed an enhanced charge-carrier population in the doped systems along with a defect-state-induced broad peak in the red region of the spectra. Transient absorption (TA) spectroscopy demonstrated that the conduction-band-edge electrons are transferred on an ultrafast time scale to the inter-band-gap defect states. TA analysis suggests that O and N doping contributes to the defect state concentration and ensures an enhanced photocatalytic activity of the system. This detailed spectroscopic analysis uncovers the role of inter-band-gap defect states in the photocatalytic activity of ZIS and will open new avenues for the construction of nanosheet-based optical devices.