Photocatalytic Degradation of Rhodamine B Dye by TiO2 and Gold Nanoparticles Supported on a Floating Porous Polydimethylsiloxane Sponge under Ultraviolet and Visible Light Irradiation

UV-light-driven cadmium sulphide (CdS) nanocatalysts: synthesis, characterization, therapeutic and environmental applications; kinetics and thermodynamic study of photocatalytic degradation of Eosin B and Methyl Green dyes

Cadmium sulphide (CdS) nanoparticles (NPs) were synthesized through hydrothermal route and characterized by UV-Vis spectroscopy, X-ray diffraction (XRD), Energy dispersive X-ray analysis, Scanning electron microscopy (SEM), Fourier transform infrared spectroscopy and Thermo gravimetric analysis (TGA).The band gap of CdS nanoparticles was found to be 2.38 eV. CdS NPs are crystalline aggregates with hexagonal structure as shown by SEM and XRD analysis. TGA study revealed that the synthesized nanomaterials were very stable to temperature and only 6.54% total loss occurred during heating range (25 °C-600 °C).The CdS NPs were used for the first time against the degradation of Eosin B (EB) and Methyl green (MG) dyes in aqueous solution.The degradation of EB and MG over CdS nanocatalysts followed second order kinetics. The predicted activation energies for both the dyes' reactions were 61.1 kJ/mol and 32.11 kJ/mol, respectively. About 95% and 90% dye degradation was observed at the time interval of 160 minutes for EB and MG, respectively. High percent degradation of EB was observed at high pH (pH 0) while at low pH (pH 4) high percent degradation was found for MG dye. Maximum dye degradation was found at the optimal dose (0.03 g/L) of the catalyst and at low dye concentration. The rate of EB and MG dye degradation was found to increase with increase in temperature up to 45 °C. The recyclability study showed that CdS nanoparticles could be reused for the degradation of the given dyes. Good antibacterial activity against Staphylococcus aureus was shown by CdS NPs. From the biocompatibility it was confirmed that CdS NPS are bioincompatible compatible.

Size-Dependent Cytotoxic and Molecular Study of the Use of Gold Nanoparticles against Liver Cancer Cells

The size of nanomaterials influences physicochemical parameters, and variations in the size of nanomaterials can have a significant effect on their biological activities in cells. Due to the potential applicability of nanoparticles (NPs), the current work was designed to carry out a size-dependent study of gold nanoparticles (GNPs) in different dimensions, synthesized via a colloidal solution process. Three dissimilar-sized GNPs, GNPs-1 (10–15 nm), GNPs-2 (20–30 nm), and GNPs-3 (45 nm), were prepared and characterized via transmission electron microscopy (TEM), high-resolution TEM (HR-TEM), hydrodynamic size, zeta potential, and UV-visible spectroscopy, and applied against liver cancer (HepG2) cells. Various concentrations of GNPs (1, 2, 5, 10, 50, and 100 µg/mL) were applied against the HepG2 cancer cells to assess the percentage of cell viability via MTT and NRU assays; reactive oxygen species (ROS) generation was also used. ROS generation was increased by 194%, 164%, and 153% for GNPs-1, GNPs-2, and GNPs-3, respectively, in the HepG2 cells. The quantitative polymerase chain reaction (qPCR) data for the HepG2 cells showed up-regulation in gene expression of apoptotic genes (Bax, p53, and caspase-3) when exposed to the different-sized GNPs, and defined their respective roles. Based on the results, it was concluded that GNPs of different sizes have the potential to induce cancer cell death.

Nanobiocatalysts and photocatalyst in dye degradation

In the modern era, the world today is in a mission for a new method of environmental bioremediation in faltering the damage, especially in polluted water. Recently, the global direction is regulated toward an alteration from the usual chemical-based methods to a supplementary ecofriendly green alternative. In this perspective, biocatalysts are appreciated as an economical and clean substitute which was meant to catalyze degradation of unmanageable chemicals in a rapid, green and ecologically stable manner. Among the various sources of water pollution, the textile manufacturing industries were thought to be a major dispute due to release of effluents in natural water bodies such as rivers. Other industries like paper, pulp and tannery pharmaceutical industries were also responsible in contaminating the water bodies. Photocatalysis was considered as an auspicious method for the removal of dyes from the natural bodies, specifically those with hard organic compounds; using enzymes. The present chapter briefly emphasizes on the effective methods used for degradation of dye effluents; their importance of photocatalytic and biocatalytic solution to the current environmental difficulties and future opportunities are discussed.

Nitrogen doped titanium dioxide as an aesthetic antimicrobial filler in dental polymers

OBJECTIVE

To develop an aesthetic resin composite using a nitrogen-doped titanium dioxide (NTiO₂) filler that possesses antimicrobial properties against cariogenic bacteria.

METHODS

N-TiO₂ powder was manufactured by calcining commercial TiO₂ with urea. Free radical release from the N-TiO₂ powder under visible light irradiation was analysed using UV-Vis spectrophotometry. The N-TiO₂ powder was incorporated into a dental resin and the photocatalytic activity assessed using a dye under both visible light and dark conditions. Using XTT assay to measure the cellular metabolic activity, the antibacterial properties of the N-TiO₂ /resin composite discs were tested using Streptococcus mutans.

RESULTS

Doping nitrogen of TiO₂ resulted in a band gap shift towards the visible light spectrum, which enabled the powder to release reactive oxygen species when exposed to visible light. When incorporated into a dental resin, the N-TiO₂/resin composite still demonstrated sustained release of reactive oxygen species, maintaining its photocatalytic activity and showing an antibacterial effect towards Streptococcus mutans under visible light conditions.

SIGNIFICANCE

N-TiO₂ filled resin composite shows great promise as a potential aesthetic resin based adhesive for orthodontic bonding.

Synergistic Effects of Fluorine and WO3 Nanoparticles on the Surface of TiO2 Hollow Spheres for Enhanced Photocatalytic Activity under Visible Light Irradiation

TiO₂ is an attractive catalyst for the photocatalytic degradation of organic pollutants. However, owing to its large band gap, it can only be activated by ultraviolet (UV) light, which constitutes a small portion of solar energy. Therefore, there has been significant interest in extending its light absorption range from UV to visible light. In this study, fluorinated TiO₂ hollow spheres (FTHSs) were prepared via a rapid and simple wet chemical process using ammonium hexafluorotitanate, and then FTHS/WO₃ heterostructures with different weight ratios of the FTHS and WO₃ nanoparticles were synthesized via a simple wet impregnation method. The formation of the hybrid structure was confirmed by various characterization techniques. The photocatalytic activity of the synthesized photocatalysts in the photodegradation of rhodamine B, a model pollutant, was evaluated under visible light irradiation. The FTHS/WO₃ heterostructures exhibited significantly improved photocatalytic activity compared to the bare FTHS or WO₃ nanoparticles. The photodegradation efficiency of the FTHS/WO₃ heterostructure in the present study was up to 0.0581 min^-1. Detailed mechanisms that lead to the enhanced photocatalytic activity of the heterostructures are discussed. In addition, comparative experiments reveal that the photodegradation efficiency of the FTHS/WO₃ heterostructure under visible light irradiation is superior to that of the P25/WO₃ heterostructure prepared from the commercially available TiO₂ catalyst (P25) via the same impregnation method.

Enhancing photoelectrochemical water splitting with plasmonic Au nanoparticles

The water-based renewable chemical energy cycle has attracted interest due to its role in replacing existing non-renewable resources and alleviating environmental issues. Utilizing the semi-infinite solar energy source is the most appropriate way to sustain such a water-based energy cycle by producing and feeding hydrogen and oxygen. For production, an efficient photoelectrode is required to effectively perform the photoelectrochemical water splitting reaction. For this purpose, appropriately engineered nanostructures can be introduced into the photoelectrode to enhance light-matter interactions for efficient generation and transport of charges and activation of surface chemical reactions. Plasmon enhanced photoelectrochemical water splitting, whose performance can potentially exceed classical efficiency limits, is of great importance in this respect. Plasmonic gold nanoparticles are widely accepted nanomaterials for such applications because they possess high chemical stability, efficiently absorb visible light unlike many inorganic oxides, and enhance light-matter interactions with localized plasmon relaxation processes. However, our understanding of the physical phenomena behind these particles is still not complete. This review paper focuses on understanding the interfacial phenomena between gold nanoparticles and semiconductors and provides a summary and perspective of recent studies on plasmon enhanced photoelectrochemical water splitting using gold nanoparticles.

Controlling morphology evolution of titanium oxide-gold nanourchin for photocatalytic degradation of dyes and photoinactivation of bacteria in the infected wound

We report a one-pot, room-temperature, morphology-controlled synthesis of titanium oxide (TiO_x)-gold nanocomposites (TiO_x-Au NCs) using HAuCl₄ and TiCl₃ as precursors, and catechin as reducing agent. TiO_x-Au NCs have a range of morphologies from star-like to urchin-like shape depending on the concentration of TiCl₃ in the reaction mixture. The urchin-shaped TiO_x-Au NCs exhibited excellent photocatalytic activity toward dye degradation due to strong light absorption, plasmon-induced excitation, high conductivity of the gold, and reduced hole-electron pair recombination. TiO_x-Au NCs have the advantage of a wide range of light absorption and surface plasmon absorption-mediated excitation due to their abundant gold spikes, which enabled the degradation of dyes over 97% in 60 min, using a xenon lamp as a light source. In addition, TiO_x-Au NCs are highly efficient for the photoinactivation of Escherichia coli and methicillin-resistant Staphylococcus aureus (MRSA), and Candida albicans through the photodynamic generation of reactive oxygen species (ROS) and damage to the bacterial membrane. The catechin derivatives on the NCs effectively promoted curing MRSA infected wounds in rats through inducing collagen synthesis, migration of keratinocytes, and neovascularization.

Improving Photoelectrochemical Activity of ZnO/TiO2 Core–Shell Nanostructure through Ag Nanoparticle Integration

In solar energy harvesting using solar cells and photocatalysts, the photoexcitation of electrons and holes in semiconductors is the first major step in the solar energy conversion. The lifetime of carriers, a key factor determining the energy conversion and photocatalysis efficiency, is shortened mainly by the recombination of photoexcited carriers. We prepared and tested a series of ZnO/TiO2-based heterostructures in search of designs which can extend the carrier lifetime. Time-resolved photoluminescence tests revealed that, in ZnO/TiO2 core–shell structure the carrier lifetime is extended by over 20 times comparing with the pure ZnO nanorods. The performance improved further when Ag nanoparticles were integrated at the ZnO/TiO2 interface to construct a Z-scheme structure. We utilized these samples as photoanodes in a photoelectrochemical (PEC) cell and analyzed their solar water splitting performances. Our data showed that these modifications significantly enhanced the PEC performance. Especially, under visible light, the Z-scheme structure generated a photocurrent density 100 times higher than from the original ZnO samples. These results reveal the potential of ZnO-Ag-TiO2 nanorod arrays as a long-carrier-lifetime structure for future solar energy harvesting applications.

Enhanced Photocatalytic Degradation of Methylene Blue by WO3 Nanoparticles Under NIR Light Irradiation

Photocatalysts have been paid great attention owing to their excellent performance in the degradation of dangerous organic pollutants. Herein, a novel longitudinally grown WO₃ photocatalyst was prepared by using a hydrothermal process, which had strong ultraviolet, visible light absorption, and weak near-infrared (NIR) absorption. The WO₃ photocatalyst exhibited excellent performance in the rapid degradation of methylene blue (MB) in industry. The photothermal effect is mainly responsible for the rapid degradation of MB under NIR laser irradiation. Besides, different morphologies and structures affect the degradation of MB. The longitudinally grown enlarged the contact area between photocatalyst and MB, and expanded the scope of the absorption wavelength of light, enhancing the stability of photocatalytic materials. So this unique transverse longitudinal structure exhibited a potential capability for degrading organic pollutants.

Defect-rich, negatively-charged SnS2 nanosheets for efficient photocatalytic Cr(VI) reduction and organic dye adsorption in water

Nanostructures of layered materials have gained increasing attention in photocatalytic and water-treatment processes. Herein, we report on sub-30 nm SnS₂ nanosheets (NSs) which can perform photocatalytic reduction of Cr(VI) to Cr(III) quite efficiently on one hand, while removes large quantities of toxic organic dye molecules by choosing an adsorption mode of operation over photo-degradation on the other hand, unlike most other SnS₂ nanostructures. The NSs have a highly extended crystallinity growing perpendicular to the (001) lattice direction but exhibit poor X-ray diffraction for the 10 l (1 = 1,2,3…) lattice planes. With such defects, the NSs have a narrow bandgap of 2.21 eV and exhibit a significant photocurrent density at near band-edge illumination. Cr(VI) photo-reduction using the SnS₂ NSs follows a first-order reaction kinetics (rate constant of 0.10 min-1), five-fold higher than commercial TiO₂ (P-25). Furthermore, the NSs adsorb Rhodamine B dye molecules from an aqueous solution by forming a monolayer of dye molecules following a pseudo-second-order kinetic model and exhibit an adsorption capacity of ∼ 53.28 mg/g. We show that the NSs have a Zeta potential of ∼ -22 eV and preferably adsorb cationic dyes only. Thus the SnS₂ NSs can be effective for Cr(VI) contaminated waste-water treatment in a photocatalytic manner and can also act as a potential adsorbent for polluting dye molecules either in the presence or absence of sunlight. While both these activities are known for SnS₂ as well as other materials, the competitive nature of the two mechanisms while each of them is a possibility has never been investigated. Therefore, besides the high activities, the study highlights the presence of different active sites on the material surface that can respond preferentially to either inorganic or organic impurities.

Fluorescent Convertible Capsule Coding Systems for Individual Cell Labeling and Tracking

In modern biomedical science and developmental biology, there is significant interest in optical tagging to study individual cell behavior and migration in large cellular populations. However, there is currently no tagging system that can be used for labeling individual cells on demand in situ with subsequent discrimination in between and long-term tracking of individual cells. In this article, we demonstrate such a system based on photoconversion of the fluorescent dye rhodamine B co-confined with carbon nanodots in the volume of micron-sized polyelectrolyte capsules. We show that this new fluorescent convertible capsule coding system is robust and is actively uptaken by cell lines while demonstrating low toxicity. Using a variety of cellular lines, we demonstrate how this tagging system can be used for code-like marking and long-term tracking of multiple individual cells in large cellular populations.

Plasmonic Gold Nanoparticles (AuNPs): Properties, Synthesis and their Advanced Energy, Environmental and Biomedical Applications

Inducing plasmonic characteristics, primarily localized surface plasmon resonance (LSPR), in conventional AuNPs through particle size and shape control could lead to a significant enhancement in electrical, electrochemical, and optical properties. Synthetic protocols and versatile fabrication methods play pivotal roles to produced plasmonic gold nanoparticles (AuNPs), which can be employed in multipurpose energy, environmental and biomedical applications. The main focus of this review is to provide a comprehensive and tutorial overview of various synthetic methods to design highly plasmonic AuNPs, along with a brief essay to understand the experimental procedure for each technique. The latter part of the review is dedicated to the most advanced and recent solar-induced energy, environmental and biomedical applications. The synthesis methods are compared to identify the best possible synthetic route, which can be adopted while employing plasmonic AuNPs for a specific application. The tutorial nature of the review would be helpful not only for expert researchers but also for novices in the field of nanomaterial synthesis and utilization of plasmonic nanomaterials in various industries and technologies.

Water-Splitting Based and Related Therapeutic Effects: Evolving Concepts, Progress, and Perspectives

Water-splitting has been extensively studied especially for energy applications. It is often not paid with enough attention for biomedical applications. In fact, several innovative breakthroughs have been achieved in the past few years by employing water-splitting for treating cancer and other diseases. Interestingly, among these important works, only two reports have mentioned the term "water-splitting." For this reason, the importance of water-splitting for biomedical applications is significantly underestimated. This progress work is written with the aims to explain and summarize how the principle of water-splitting is employed to achieve therapeutic results not offered by conventional approaches. It is expected that this progress report will not only explain the importance of water-splitting to scientists in the biomedical fields, it should also draw attention from scientists working on energy applications of water-splitting.

Photocatalytic Degradation of Rhodamine B by C and N Codoped TiO2 Nanoparticles under Visible-Light Irradiation

C and N codoped TiO2 nanoparticles were synthesized via a solvothermal method. The degradation of Rhodamine B by the photocatalyst C, N-TiO2 was investigated under visible-light irradiation generated by using a 36 W compact fluorescent lamp which is characterized by wavelengths from 400 to 650 nm. The structure and properties of the obtained photocatalyst have been systematically investigated using X-ray diffraction, TEM, UV-Vis, FT-IR, and BET techniques. The experimental results revealed that C, N codoped TiO2 nanoparticles were successfully synthesized, with an average diameter of 9.1 nm. C, N-TiO2 nanoparticles exhibited an energy band gap of 2.90 eV, which were lower than pristine TiO2 (3.34 eV), C-TiO2 (3.2 eV), and N-TiO2 (3.03 eV). The degradation of Rhodamine B by C, N-TiO2 indicated that, under visible-light irradiation, the optimal dose of the photocatalyst was 1.8 g/L, and the removal of Rhodamine B was almost complete after 3 hours of reaction. The photocatalytic degradation of Rhodamine B in the range of 5–100 mg/L showed that the process followed the first-order kinetics according to the Langmuir–Hinshelwood model. The highest apparent rate constant (0.0427 min−1) was obtained when the initial concentration of Rhodamine B was 5 mg/L, whereas the former decreased with the increase in the initial concentration of Rhodamine B. Moreover, C and N codoped TiO2 nanoparticles presented a high potential for recycling, which was characterized by a removal efficiency of more than 86% after three cycles.