Polyaniline Anchored MWCNTs on Fabric for High Performance Wearable Ammonia Sensor

Highly sensitive polyaniline-coated fiber gas sensors for real-time monitoring of ammonia gas

A single-yarn-based gas sensor has been made from conductive polyaniline coated on commercial yarns. This can detect ammonia gas concentration in an environment or a working area. Cotton, rayon and polyester are utilized as substrates using a dip-coating process. The conductive yarns show ohmic behavior with an electrical resistance of 15-31 kΩ cm-1. The conductive polyester yarn exhibits higher mechanical strength even after intensive chemical treatment. It also has the highest gas response of 57% of 50 ppm ammonia gas, the concentration at which health problems will occur. A linear gas response of the yarn sensor appears in a range of 5-25 ppm ammonia concentration. The polyester yarn sensor can be reused without any change in its sensing response. It can monitor gas levels continuously giving real-time results. By using a microcontroller as part of the circuitry, the gas detection results are transferred and updated wirelessly to a computer or to a smartphone. The textile-based gas sensor can be sewn directly onto the fabrics since it is made with the same fabric. This single-yarn-based gas sensor is suitable for mass production and is appropriate for sophisticated applications.

Porous reduced graphene oxide (rGO)/WO3 nanocomposites for the enhanced detection of NH3 at room temperature

Incorporation of reduced graphene oxide (rGO) modifies the properties of semiconducting metal oxide nanoparticles and makes it possible to tune the surface area and pore size to optimum values, which in turn improves their gas sensing properties. In this work, to improve the ammonia (NH₃) gas sensing characteristics, reduced graphene oxide (rGO) was incorporated into tungsten oxide (WO₃) nanospheres using a simple ultrasonication method. The rGO-WO₃ nanocomposites exhibited porous nanosheets with nanospherical WO₃ as observed with field-emission scanning electron microscopy (FE-SEM). The oxidation state of the rGO-WO₃ nanocomposite was determined using X-ray photoelectron spectroscopy (XPS). Three ratios of (1, 5 and 10% rGO/WO₃) nanocomposites and pure WO₃ showed good selectivity towards NH₃ at 10-100 ppm, and more remarkably at room temperature in the range of about 32-35 °C and at a relative humidity (RH) of 55%. The limit of detection (LOD) of the synthesized rGO-WO₃ nanocomposites was 1.14 ppm, which will highly favour low detection ranges of NH₃. The sensor response was 1.5 times higher than that of the bare WO₃ nanospheres. The sensors showed excellent selectivity, ultrafast response/recovery times (18/24 s), reproducibility and stability even after one month of their preparation. We believe that metal oxides using the rGO modifier can improve the sensitivity and reduce the LOD towards NH₃ and can be used effectively in real-time environmental monitoring.

Stimuli-enabled switch-like paracetamol electrochemical sensor based on thermosensitive polymer and MWCNTs-GQDs composite nanomaterial

A temperature-controlled switchable electrochemical sensor was constructed based on a composite film consisting of thermosensitive block polymer poly(styrene-b-(N-isopropylacrylamide)-b-styrene) (PS-PNIPAm-PS), carboxylated multi-walled carbon nanotubes (MWCNTs-COOH) and amino-functionalized graphene quantum dots (N-GQDs). The prepared sensor showed good temperature sensitivity and reversibility in sensing paracetamol. In the low temperature environment, the polymer stretched to bury the electroactive sites of the carbon nanocomposite, and the paracetamol could not pass through the polymer to achieve electronic exchange, representing the "closed" state. Conversely, in the high temperature environment, the polymer shrank to expose the electroactive sites and enlarge background currents, the paracetamol was able to undergo the redox reaction normally and generate the response current, representing the "on" state. In addition, the sensor had a wide detection range (0.1 to 7.0 μM and 7.0 to 103.0 μM) and a low LOD of 66 nM for paracetamol. This switch-like sensor provided a novel idea for the application of thermosensitive polymers.

Flexible Sensors—From Materials to Applications

Flexible sensors have the potential to be seamlessly applied to soft and irregularly shaped surfaces such as the human skin or textile fabrics. This benefits conformability dependant applications including smart tattoos, artificial skins and soft robotics. Consequently, materials and structures for innovative flexible sensors, as well as their integration into systems, continue to be in the spotlight of research. This review outlines the current state of flexible sensor technologies and the impact of material developments on this field. Special attention is given to strain, temperature, chemical, light and electropotential sensors, as well as their respective applications.

Highly sensitive amperometric detection of glutamate by glutamic oxidase immobilized Pt nanoparticle decorated multiwalled carbon nanotubes(MWCNTs)/polypyrrole composite

A highly sensitive and selective glutamate biosensor using glutamate Oxidase (GlUtOx) immobilized platinum nanoparticle (PtNP) decorated multiwall carbon nanotube (MWCNTs)/polypyrrole (PPy) composite on glassy carbon electrodes (GC) is demonstrated. PtNP decorated MWCNTs (Pt-MWCNTs), PPy and Pt-MWCNTs/PPy composite were characterized by Field Emission Scanning Electron Microscope (FESEM), X-ray diffraction (XRD) and Raman analysis to confirm the formation of the nanocomposite. The glutamate Oxidase (GlUtOx) was immobilized on a GC/Pt-MWCNTs/PPy and characterized by the cyclic voltammetry (CV) and impedance spectroscopy (EIS) analysis. The fabricated L-glutamate biosensor exhibited high sensitivity (723.08 µA cm^-2 mM^-1) with less response time (3 s) with a detection limit of 0.88 µM. The dynamic range from 10 to 100 µM with a correlation coefficient (R2) of 0.985 was observed for the L-glutamate biosensor. The analytical recovery of added L-glutamate acid (50 and 100 μM) in human serum soup were 96.1% and 97.5% respectively. The enzyme immobilized GC/Pt-MWCNTs/PPy/GlUtOx bioelectrode lost 12.6% and 23.8% of its initial activity after 30 days when stored at - 20 °C and 4 °C respectively.