Water desalination using carbon-nanotube-enhanced membrane distillation

Engineering Water and Solute Dynamics and Maximal Use of CNT Surface Area for Efficient Water Desalination

While polymer-based membranes and the consistent plants and elements have long been considered and optimized, there are only few studies on optimization of the new generation of carbon-based porous membranes for water desalination. By modeling the elements and their corresponding parameters in a vertical configuration via COMSOL Multiphysics software, an experimental setup was modified that contained various bare and carbon nanotube (CNT)-covered microprocessed porous membranes in parallel and in series. Several design parameters such as inlet pressure, length of outlet, vertical distance of the parallel membranes, and horizontal distances of the series membranes were optimized. Taking advantage of the uttermost surface area of CNTs and the engineered particle trajectory, almost 90% NaCl rejection and 97% Allura red rejection were obtained with very high permeation values. Considering microsized outlets, the results of particle rejections are outstanding owing to the smart design of the setup. The results of this work can be extended to larger and smaller scales up to the point where the governing equations still hold.

Nanoscopic insights of saline water in carbon nanotube appended filters using molecular dynamics simulations

Nanotube appended membranes are shown to be very promising due to their ultrafast water transport and very high salt rejection ability. Using classical molecular dynamics, the present study reports the nanoscopic assessment of various molecular events for nanotube-based desalination, which might be useful for nanoscale devices during process operation at the macroscopic scale. The characteristics of water and ion flow are discussed with varied strength of pressure gradient and salt concentration for different scales of confinement. The results revealed that the membranes comprising nanotubes of 1.0-1.1 nm diameter can be optimized for efficient water desalination with more than >95% salt rejection. Furthermore, the anomalies in water flux through nanotubes are linked with the hydration characteristics of ions inside CNTs. The results show the maximum hydration of confined ions inside the nanotubes, which indicated the minimum permeability of water due to freezing effects. Furthermore, the MD results revealed that akin to bulk phases, the mass transport through nanotubes can be linked with the component diffusivity in the medium. It has been demonstrated that not only the diffusivities of water and ions, but even the gradient of water to ion diffusivity might be utilized to predict and explore the experimental observations, which might be helpful in optimizing the operational regime in nanotube-based filtrations. Moreover, the thermodynamic characteristics of the flow are discussed in terms of the entropy of water and ions using the robust two-phase thermodynamic (2PT) method. The results reflect that the entropy of water is linked to the distortion of the hydrogen bond network inside the nanotube confinement, at the nanotube-water interface and at the bulk solution, whereas the entropy of ions seems to be majorly dominated by their oscillation. Also, the interconnection of hydration structure, mass flux and the diffusivity of water and ions along with their thermodynamic origin are discussed.

Emerging Membrane Technologies for Water and Energy Sustainability: Future Prospects, Constrains and Challenges

The increasing demand for global energy consumption expedites major opportunities for the innovation of green energy technologies. Addressing the issue of sustainable energy is highly crucial for societies in order to maintain secure and balanced future progress in the economy and ecologically. Recently, there has been a growing interest in the development of improved and efficient sustainable energy technologies that are capable of reducing the global environmental footprint. The growing knowledge of hybrid techniques contributes to a decrease in the use of environmental resources while generating energy. However, various factors including the availability of natural resources, and different economic policies restrict the development of sustainable energies. Water and energy are the two major aspects for progressing towards a sustainable future. Recently, membrane-based technologies have begun to play an essential role in the advancement of sustainable energy and water demands. In this review article, the opportunities for membrane technologies dealing with water and energy sustainability have been analyzed.

Stable Superhydrophobic Ceramic-Based Carbon Nanotube Composite Desalination Membranes

Membrane distillation (MD) is a promising process for the treatment of highly saline wastewaters. The central component of MD is a stable porous hydrophobic membrane with a large liquid-vapor interface for efficient water vapor transport. A key challenge for current polymeric or hydrophobically modified inorganic membranes is insufficient operating stability, resulting in some issues such as wetting, fouling, flux, and rejection decline. This study presents an overall conceptual design and application strategy for a superhydrophobic ceramic-based carbon nanotube (CNT) desalination membrane having specially designed membrane structures with unprecedented operating stability and MD performance. Superporous and superhydrophobic surface structures with CNT networks are created after quantitative regulation of in situ grown CNT. The fully covered CNT layers (FC-CNT) exhibit significantly improved thermally and superhydrophobically stable properties under an accelerated stability test. Due to the distinctive structure of the superporous surface network, providing a large liquid-vapor superhydrophobic interface and interior finger-like macrovoids, the FC-CNT membrane exhibits a stable high flux with a 99.9% rejection of Na⁺, outperforming existing inorganic membranes. Under simple and nondestructive electrochemically assisted direct contact MD (e-DCMD), enhanced antifouling performance is observed. The design strategy is broadly applicable to be extended toward fabrication of high performance membranes derived from other ceramic or inorganic substrates and additional applications in wastewater and gas treatment.

Seawater desalination using pillared graphene as a novel nano-membrane in reverse osmosis process: nonequilibrium MD simulation study

Herein, the applicability and efficiency of two types of pillared graphene nanostructures, namely, (6,6)@G and (7,7)@G, were investigated as membranes in reverse osmosis seawater desalination using extensive nonequilibrium molecular dynamics simulations.

Hierarchical Multicomponent Inorganic Metamaterials: Intrinsically Driven Self-Assembly at the Nanoscale

Increasingly intricate in their composition and structural organization, hierarchical multicomponent metamaterials with nonlinear spatially reconfigurable functionalities challenge the intrinsic constraints of natural materials, revealing tremendous potential for the advancement of biochemistry, nanophotonics, and medicine. Recent breakthroughs in high-resolution nanofabrication utilizing ultranarrow, precisely controlled ion or laser beams have enabled assembly of architectures of unprecedented structural and functional complexity, yet costly, time- and energy-consuming high-resolution sequential techniques do not operate effectively at industry-required scale. Inspired by the fictional Baron Munchausen's fruitless attempt to pull himself up, it is demonstrated that metamaterials can undergo intrinsically driven self-assembly, metaphorically pulling themselves up into existence. These internal drivers hold a key to unlocking the potential of metamaterials and mapping a new direction for the large-area, cost-efficient self-organized fabrication of practical devices. A systematic exploration of these efforts is presently missing, and the driving forces governing the intrinsically driven self-assembly are yet to be fully understood. Here, recent progress in the self-organized formation and self-propelled growth of complex hierarchical multicomponent metamaterials is reviewed, with emphasis on key principles, salient features, and potential limitations of this family of approaches. Special stress is placed on self-assembly driven by plasma, current in liquid, ultrasonic, and similar highly energetic effects, which enable self-directed formation of metamaterials with unique properties and structures.

Decoration of polyfluorene-wrapped carbon nanotube thin films via strain-promoted azide–alkyne cycloaddition

Latently reactive polymer–SWNT complexes were prepared by coating SWNTs with polyfluorene containing azide moieties in the side chain, allowing spatially resolved decoration of nanotube thin films with various functionalities.

Water transport and desalination through double-layer graphyne membranes

Double-layer graphyne sheets with carefully chosen layer spacing are promising candidates as membranes in reverse osmosis desalination.

Fabrication and Water Treatment Application of Carbon Nanotubes (CNTs)-Based Composite Membranes: A Review

Membrane separation technology is widely explored for various applications, such as water desalination and wastewater treatment, which can alleviate the global issue of fresh water scarcity. Specifically, carbon nanotubes (CNTs)-based composite membranes are increasingly of interest due to the combined merits of CNTs and membrane separation, offering enhanced membrane properties. This article first briefly discusses fabrication and growth mechanisms, characterization and functionalization techniques of CNTs, and then reviews the fabrication methods for CNTs-based composite membranes in detail. The applications of CNTs-based composite membranes in water treatment are comprehensively reviewed, including seawater or brine desalination, oil-water separation, removal of heavy metal ions and emerging pollutants as well as membrane separation coupled with assistant techniques. Furthermore, the future direction and perspective for CNTs-based composite membranes are also briefly outlined.

Superpermeable Atomic-Thin Graphene Membranes with High Selectivity

Theoretical permeability of membrane is inversely proportional to its thickness, which indicates ultrathin membranes will be extremely permeable. Inspired by the atomic thickness of graphene, herein we report a four-layered graphene membrane with a thickness of about 2 nm. The ultrathin membrane is facilely fabricated by directly punching a complete graphene sheet through selective removal of some carbon atoms with metal oxide nanoparticles at high temperature. Their perpendicular pore channels spanning the whole thickness could, to a great extent, reduce hydrodynamic resistance for water transport. Experimental tests have revealed a flux of up to 4600 L m^-2 h^-1 of the membranes with a pore size of 50 nm and pore density of 1.0 × 10⁷ cm^-2 at a pressure of 0.2 bar. This flux is 40-400 times higher than those of conventional ceramic membranes and track-etched membranes. The enhancement in water permeance is attributed to their atomic thickness and straight pore channels. High selectivity is also evidenced by selective separation of nanospheres with their narrowly distributed pores. These atomic-thin graphene membranes, in view of their outstanding permeability and selectivity, possess great potential as future advanced membranes and may inspire the design and development of other innovative membranes.

Development of a Desalination Membrane Bioinspired by Mangrove Roots for Spontaneous Filtration of Sodium Ions

The shortage of available fresh water is one of the global issues presently faced by humanity. To determine a solution to this problem, the survival strategies of plants have been examined. In this study, a nature-inspired membrane with a highly charged surface is proposed as an effective membrane for the filtration of saline water. To mimic the desalination characteristics of mangrove roots, a macroporous membrane based on polyethylene terephthalate is treated with polyelectrolytes using a layer-by-layer deposition method. The fabricated membrane surface has a highly negative charged ζ-potential value of -97.5 ± 4.3 mV, similar to that of the first layer of mangrove roots. Desalination of saline water using this membrane shows a high salt retention rate of 96.5%. The highly charged surface of the membrane may induce a relatively thick and stable ion depletion zone in front of the membrane. As a result, most co-ions are repelled from the membrane surface, and counterions are also rejected by virtue of their electroneutrality. The water permeability is found to be 7.60-7.69 L/m²·h, which is 10 times higher than that of the reverse osmosis desalination method. This nature-inspired filtration membrane exhibits steady desalination performance over 72 h of operation, successfully demonstrating the stable filtration of saline water. This nature-inspired membrane is applicable to the design of a small-scale, portable, and energy-free desalination device for use in third-world countries or small villages.

Mixed Matrix Carbon Molecular Sieve and Alumina (CMS-Al2O3) Membranes

This work shows mixed matrix inorganic membranes prepared by the vacuum-assisted impregnation method, where phenolic resin precursors filled the pore of α-alumina substrates. Upon carbonisation, the phenolic resin decomposed into several fragments derived from the backbone of the resin matrix. The final stages of decomposition (>650 °C) led to a formation of carbon molecular sieve (CMS) structures, reaching the lowest average pore sizes of ~5 Å at carbonisation temperatures of 700 °C. The combination of vacuum-assisted impregnation and carbonisation led to the formation of mixed matrix of CMS and α-alumina particles (CMS-Al2O3) in a single membrane. These membranes were tested for pervaporative desalination and gave very high water fluxes of up to 25 kg m(-2) h(-1) for seawater (NaCl 3.5 wt%) at 75 °C. Salt rejection was also very high varying between 93-99% depending on temperature and feed salt concentration. Interestingly, the water fluxes remained almost constant and were not affected as feed salt concentration increased from 0.3, 1 and 3.5 wt%.

Ultrabreathable and Protective Membranes with Sub-5 nm Carbon Nanotube Pores

Small-diameter carbon nanotubes (CNTs) are shown to enable exceptionally fast transport of water vapor under a concentration gradient driving force. Thanks to this property, membranes having sub-5 nm CNTs as conductive pores feature outstanding breathability while maintaining a high degree of protection from biothreats by size exclusion.

How To Functionalize Ceramics by Perfluoroalkylsilanes for Membrane Separation Process? Properties and Application of Hydrophobized Ceramic Membranes

The combination of microscopic (atomic force microscopy and scanning electron microscopy) and goniometric (static and dynamic measurements) techniques, and surface characterization (surface free energy determination, critical surface tension, liquid entry pressure, hydraulic permeability) was implemented to discuss the influence of perfluoroalkylsilanes structure and grafting time on the physicochemistry of the created hydrophobic surfaces on the titania ceramic membranes of 5 kD and 300 kD. The impact of molecular structure of perfluoroalkylsilanes modifiers (possessing from 6 to 12 carbon atoms in the fluorinated part of the alkyl chain) and the time of the functionalization process in the range of 5 to 35 h was studied. Based on the scanning electron microscopy with energy-dispersive X-ray spectroscopy, it was found that the localization of grafting molecules depends on the membrane pore size (5 kD or 300 kD). In the case of 5 kD titania membranes, modifiers are attached mainly on the surface and only partially inside the membrane pores, whereas, for 300 kD membranes, the perfluoroalkylsilanes molecules are present within the whole porous structure of the membranes. The application of 4 various types of PFAS molecules enabled for interesting observations and remarks. It was explained how to obtain ceramic membrane surfaces with controlled material (contact angle, roughness, contact angle hysteresis) and separation properties. Highly hydrophobic surfaces with low values of contact angle hysteresis and low roughness were obtained. These surfaces possessed also low values of critical surface tension, which means that surfaces are highly resistant to wetting. This finding is crucial in membrane applicability in separation processes. The obtained and characterized hydrophobic membranes were subsequently applied in air-gap membrane distillation processes. All membranes were very efficient in MD processes, showing good transport and selective properties (∼99% of NaCl salt rejection). Depending on the membrane pore size and used modifiers, the permeate flux was in the range of 0.5-4.5 kg·m(-2)·h(-1) and 0.3-4.2 kg·m(-2)·h(-1) for 5 kD and 300 kD membranes, respectively.

FAS Grafted Electrospun Poly(vinyl alcohol) Nanofiber Membranes with Robust Superhydrophobicity for Membrane Distillation

This study develops a novel type of electrospun nanofiber membranes (ENMs) with high permeability and robust superhydrophobicity for membrane distillation (MD) process by mimicking the unique unitary microstructures of ramee leaves. The superhydrophobic ENMs were fabricated by the eletrospinning of poly(vinyl alcohol) (PVA), followed by chemical cross-linking with glutaraldehyde and surface modification via low surface energy fluoroalkylsilane (FAS). The resultant FAS grafted PVA (F-PVA) nanofiber membranes were endowed with self-cleaning properties with water contact angles of 158° and sliding angles of 4° via the modification process, while retaining their high porosities and interconnected open structures. For the first time, the robust superhydrophobicity of the ENMs for MD was confirmed by testing the F-PVA nanofiber membranes under violent ultrasonic treatment and harsh chemical conditions. Furthermore, vacuum membrane distillation experiments illustrated that the F-PVA membranes presented a high and stable permeate flux of 25.2 kg/m2 h, 70% higher than those of the commercial PTFE membranes, with satisfied permeate conductivity (<5 μm/cm) during a continuous test of 16 h (3.5 wt % NaCl as the feed solution, and feed temperature and permeate pressure were set as 333 K and 9 kPa, respectively), suggesting their great potentials in myriad MD processes such as high salinity water desalination and volatile organiccompounds removal.

Emerging desalination technologies for water treatment: a critical review

In this paper, a review of emerging desalination technologies is presented. Several technologies for desalination of municipal and industrial wastewater have been proposed and evaluated, but only certain technologies have been commercialized or are close to commercialization. This review consists of membrane-based, thermal-based and alternative technologies. Membranes based on incorporation of nanoparticles, carbon nanotubes or graphene-based ones show promise as innovative desalination technologies with superior performance in terms of water permeability and salt rejection. However, only nanocomposite membranes have been commercialized while others are still under fundamental developmental stages. Among the thermal-based technologies, membrane distillation and adsorption desalination show the most promise for enhanced performance with the availability of a waste heat source. Several alternative technologies have also been developed recently; those based on capacitive deionization have shown considerable improvements in their salt removal capacity and feed water recovery. In the same category, microbial desalination cells have been shown to desalinate high salinity water without any external energy source, but to date, scale up of the process has not been methodically evaluated. In this paper, advantages and drawbacks of each technology is discussed along with a comparison of performance, water quality and energy consumption.

Modification of the surface chemistry of single- and multi-walled carbon nanotubes by HNO3 and H2SO4 hydrothermal oxidation for application in direct contact membrane distillation

A specific methodology based on nitric acid hydrothermal oxidation was used to control the surface chemistry of multi-walled (MWCNTs) and single-walled (SWCNTs) carbon nanotubes (CNTs) with different lengths, and this methodology was adapted to the use of sulphuric acid containing ammonium persulfate as an oxidizing agent. The amount of oxygen-containing surface groups depends on the number and length of the graphene layers of the CNTs, thicker and shorter CNTs having more reactive sites for surface functionalization. In particular, the oxidation of MWCNTs was more pronounced than that of short SWCNTs and less surface groups were introduced into long SWCNTs, regardless of the acid used at any fixed concentration. It was also possible to tailor the surface chemistry of both SWCNTs and MWCNTs by using the adopted methodologies, and the amount of both oxygen- and sulphur-containing functional groups was correlated with the concentration of each oxidizing agent used. Mathematical functions that allow precise control of the amount and type of the surface groups introduced into carbon nanotubes were obtained. Buckypapers were also prepared over a polytetrafluoroethylene commercial membrane. These membranes were tested in direct contact membrane distillation and, under salinity conditions, the membrane prepared using oxidized MWCNTs (instead of SWCNTs) was the most efficient, the permeate flux of the commercial membrane significantly increasing in the presence of these CNTs, while completely rejecting chloride ions. In addition, the permeate flux was precisely correlated with the amount of oxygenated functional surface groups (as well as with the pH of point of zero charge) of the oxidized MWCNTs.