Spirulina-based carbon materials as adsorbents for drinking water taste and odor control: Removal efficiency and assessment of cyto-genotoxic effects

The sensory quality of drinking water, and particularly its taste and odor (T&O) is a key determinant of consumer acceptability, as consumers evaluate water by their senses. Some of the conventional treatment processes to control compounds which impart unpleasant T&O have limitations because of their low efficiency and/or high costs. Therefore, there is a great need to develop an effective process for removing T&O compounds without secondary concerns. The primary objective of this study was to assess for the first time the effectiveness of spirulina-based carbon materials in removing geosmin (GSM) and 2-methylisoborneol (2-MIB) from water, two commonly occurring natural T&O compounds. The efficiency of the materials to remove environmentally relevant concentrations of GSM and 2-MIB (ng L-1) from ultrapure and raw water was investigated using a sensitive headspace solid-phase microextraction coupled with gas chromatography mass spectrometry (HS-SPME-GC/MS) method. Moreover, the genotoxic and cytotoxic effects of the spirulina-based materials were assessed for the first time to evaluate their safety and their potential in the treatment of water for human consumption. Based on the results, spirulina-based materials were found to be promising for drinking water treatment applications, as they did not exert geno-cytotoxic effects on human cells, while presenting high efficiency in removing GSM and 2-MIB from water.

Toxicity of butylone and its enantiomers to Daphnia magna and its degradation/toxicity potential using advanced oxidation technologies

Butylone (BTL) is a chiral synthetic cathinone available as a racemate and reported as contaminant in wastewater effluents. However, there are no studies on its impact on ecosystems and possible enantioselectivity in ecotoxicity. This work aimed to evaluate: (i) the possible ecotoxicity of BTL as racemate or its isolated (R)- and (S)- enantiomers using Daphnia magna; and (ii) the efficiency of advanced oxidation technologies (AOTs) in the removal of BTL and reduction of toxic effects caused by wastewaters. Enantiomers of BTL were obtained by liquid chromatography (LC) using a chiral semi-preparative column. Enantiomeric purity of each enantiomer was > 97 %. For toxicity assessment, a 9-day sub-chronic assay was performed with the racemate (at 0.10, 1.0 or 10 μg L-1) or each enantiomer (at 0.10 or 1.0 μg L-1). Changes in morphophysiological, behavioural, biochemical and reproductive endpoints were observed, which were dependent on the form of the substance and life stage of the organism (juvenile or adult). Removal rates of BTL in spiked wastewater (10 μg L-1) treated with different AOTs (ultraviolet, UV; ozonation, O3; and UV/O3) were similar and lower than 29 %. The 48 h D. magna acute toxicity assays demonstrated a reduction in the toxicity of the treated spiked effluents, but no differences were found amongst AOTs treatments. These results warn for the contamination and negative impact of BTL on ecosystems and highlight the need for efficient removal processes.

Combining fungal bioremediation and ozonation for rinse wastewater treatment

In this work, agricultural rinse wastewater, which is produced during the cleaning of agricultural equipment and constitutes a major source of pesticides, was treated by fungal bioremediation and ozonation, both individually and combined in a two-stage treatment train. Three major pesticides (thiacloprid, chlortoluron, and pyrimethanil) were detected in rinse wastewater, with a total concentration of 38.47 mg C L-1. Comparing both technologies, ozonation in a stirred reactor achieved complete removal of these pesticides (720 min) while proving to be a more effective approach for reducing colour, organic matter, and bacteria. However, this technique produced transformation products and increased toxicity. In contrast, fungal bioremediation in a rotating drum bioreactor attenuated toxicity levels and did not produce such metabolites, but only removed approximately 50 % of target pesticide - hydraulic retention time (HRT) of 5 days - and obtained worse results for most of the general quality parameters studied. This work also includes a preliminary economic assessment of both technologies, revealing that fungal bioremediation was 2 times more cost-effective than ozonation. The treatment train, consisting of a first stage of fungal bioremediation followed by ozonation, was found to be a promising approach as it synergistically combines the advantages of both treatments, achieving high removals of pesticides (up to 100 %) and transformation products, while reducing operating costs and producing a biodegradable effluent. This is the first time that fungal bioremediation and ozonation technologies have been compared and combined in a treatment train to deal with pesticides in agricultural rinse wastewater.

Nanofiltration combined with ozone-based processes for the removal of antineoplastic drugs from wastewater effluents

Over the past years, there has been an increasing concern about the occurrence of antineoplastic drugs in water bodies. The incomplete removal of these pharmaceuticals from wastewaters has been confirmed by several scientists, making it urgent to find a reliable technique or a combination of techniques capable to produce clean and safe water. In this work, the combination of nanofiltration and ozone (O3)-based processes (NF + O3, NF + O3/H2O2 and NF + O3/H2O2/UVA) was studied aiming to produce clean water from wastewater treatment plant (WWTP) secondary effluents to be safely discharged into water bodies, reused in daily practices such as aquaculture activities or for recharging aquifers used as abstraction sources for drinking water production. Nanofiltration was performed in a pilot-scale unit and O3-based processes in a continuous-flow column. The peroxone process (O3/H2O2) was considered the most promising technology to be coupled to nanofiltration, all the target pharmaceuticals being removed at an extent higher than 98% from WWTP secondary effluents, with a DOC reduction up to 92%. The applicability of the clean water stream for recharging aquifers used as abstraction sources for drinking water production was supported by a risk assessment approach, regarding the final concentrations of the target pharmaceuticals. Moreover, the toxicity of the nanofiltration retentate, a polluted stream generated from the nanofiltration system, was greatly decreased after the application of the peroxone process, which evidences the positive impact on the environment of implementing a NF + O3/H2O2 process.

Novel photoelectrochemical 3D-system for water disinfection by deposition of modified carbon nitride on vitreous carbon foam

Graphitic carbon nitride (GCN) is an optical semiconductor with excellent photoactivity under visible light irradiation. It has been widely applied for organic micropollutant removal from contaminated water, and less investigated for microorganisms' inactivation. The photocatalytic degradation mechanism using GCN is attributed to a series of reactions with reactive oxygen species and photogenerated holes that can be boosted by modifying its physical-chemical structure. This work reports a successful improvement of the overall photocatalytic and electrocatalytic activities of the pristine material by thermal and chemical modification by a copolymerisation synthesis method. The copolymerisation of dicyandiamide as a precursor with barbituric acid strongly reduced photoluminescence due to the enhanced charge separation thus improving the catalyst efficiency under visible light irradiation. The material with 1.6 wt% of barbituric acid showed the best photocatalytic performance and electrochemical properties. This photocatalyst was selected for immobilisation on a conductive carbon foam, which promotes a higher electrochemical active surface area and enhanced mass transfer. This three-dimensional metal-free electrode was employed for the photoelectrochemical inactivation of two different microorganisms, Escherichia coli, and Enterococcus faecalis, obtaining removals below the detection limit after 30 min in simulated faecal-contaminated waters. This photoelectrochemical reactor was also applied to treat polluted river and urban waste waters, and the faecal contamination indicators were vastly reduced to values below the detection limit in 60 min in both cases, showing the wide applicability of this innovative photoelectrode for different types of polluted aqueous matrices.

Multi-target analysis of cytostatics in hospital effluents over a 9-month period

The consumption of cytostatics, pharmaceuticals prescribed in chemotherapy, is increasing every year and worldwide, along with the incidence of cancer. The presence and the temporal evolution of cytostatics in wastewaters from a Portuguese hospital center was evaluated through a 9-month sampling campaign, comprising a total of one hundred and twenty-nine samples, collected from May 2019 to February 2020. Eleven cytostatics out of thirteen pharmaceuticals were studied, including flutamide, mycophenolate mofetil and mycophenolic acid, which have never been monitored before. Target analytes were extracted and quantified by solid-phase extraction coupled to liquid-chromatography-tandem mass spectrometry analysis; the method was fully validated. All pharmaceuticals were detected in at least one sample, bicalutamide being the one found with higher frequency (detected in all samples), followed by mycophenolic acid, which was also the compound detected at higher concentrations (up to 5340 ± 211 ng/L). Etoposide, classified as carcinogenic to humans, was detected in 60% of the samples at concentrations up to 142 ± 15 ng/L. The risk from exposure to cytostatics was estimated for aquatic organisms living in receiving bodies. Cyclophosphamide, doxorubicin, etoposide, flutamide, megestrol and mycophenolic acid are suspected to induce risk. Long-term and synergic effects should not be neglected, even for the cytostatics for which no risk was estimated.

Per- and Poly-Fluoroalkyl Substances in Portuguese Rivers: Spatial-Temporal Monitoring

Eighteen per-and polyfluoroalkyl substances (PFASs) were investigated in surface waters of four river basins in Portugal (Ave, Leça, Antuã, and Cértima) during the dry and wet seasons. All sampling sites showed contamination in at least one of the seasons. In the dry season, perfluorooctanoate acid (PFOA) and perfluoro-octane sulfonate (PFOS), were the most frequent PFASs, while during the wet season these were PFOA and perfluobutane-sulfonic acid (PFBS). Compounds detected at higher concentrations were PFOS (22.6 ng L^-1) and perfluoro-butanoic acid (PFBA) (22.6 ng L^-1) in the dry and wet seasons, respectively. Moreover, the prospective environmental risks of PFASs, detected at higher concentrations, were evaluated based on the Risk Quotient (RQ) classification, which comprises acute and chronic toxicity. The results show that the RQ values of eight out of the nine PFASs were below 0.01, indicating low risk to organisms at different trophic levels in the four rivers in both seasons, wet and dry. Nevertheless, in the specific case of perfluoro-tetradecanoic acid (PFTeA), the RQ values calculated exceeded 1 for fish (96 h) and daphnids (48 h), indicating a high risk for these organisms. Furthermore, the RQ values were higher than 0.1, indicating a medium risk for fish, daphnids and green algae (96 h).

Are cytostatic drugs in surface waters a potential threat?

Cytostatic drugs are pharmaceuticals administered to cancer patients under chemotherapy. Their occurrence in surface waters has been reported worldwide, increasing environmental and human health concerns. This work addresses a question of worldwide interest: are these hazardous pharmaceuticals in surface waters a potential threat? For the first time, this study brings information on the presence of cytostatic drugs in Portuguese rivers. Furthermore, cutting-edge data on the occurrence of two cytostatic drugs is provided; up to the authors' best knowledge, flutamide and mycophenolate mofetil have never been monitored in worldwide surface waters. Nine out of thirteen cytostatic drugs were detected in Portuguese rivers. Despite bicalutamide being the cytostatic most frequently detected, the highest concentration was recorded for cyproterone (19 ± 3 ng/L). Three different scenarios were considered to estimate the risks from the exposure of humans to cytostatic drugs via surface waters. Two scenarios are associated with bathing practices in rivers, particularly in the spring and summer seasons (river beaches): (i) the exposure to cytostatic drugs by dermal contact with contaminated water and (ii) the exposure by accidental ingestion of contaminated water, which is less likely but also occurs. The third exposure scenario is related to (iii) the long-life consumption of drinking water produced from river water capture, under worst-case conditions, i.e. negligible degradation of cytostatic drugs at drinking water treatment plants. It was concluded that the third exposure context to cytostatics could represent a risk to children, if the highest concentration ever reported in the literature for cyclophosphamide in surface waters is considered. Still, attending to the carcinogenicity of some of these compounds (e.g., cyclophosphamide, chlorambucil, etoposide and tamoxifen), health risks might always be expected, regardless of the contamination level. Furthermore, health risks associated with synergic effects and/or long-term exposures cannot be ruled out, even for the remaining cytostatics/exposure contexts.

Can aged microplastics be transport vectors for organic micropollutants? - Sorption and phytotoxicity tests

Microplastics have been investigated over the last decade as potential transport vectors for other pollutants. However, the specific role of plastic aging, in which plastics change their characteristics over time when exposed to environmental agents, has been overlooked. Therefore, sorption experiments were herein conducted using virgin and aged (by ozone treatment or rooftop weathering) microplastic particles of LDPE - low-density polyethylene, PET - poly(ethylene terephthalate), or uPVC - unplasticized poly(vinyl chloride). The organic micropollutants (OMPs) selected as sorbates comprise a diversified group of priority substances and contaminants of emerging concern, including pharmaceutical substances (florfenicol, trimethoprim, diclofenac, tramadol, citalopram, venlafaxine) and pesticides (alachlor, clofibric acid, diuron, pentachlorophenol), analyzed at trace concentrations (each ≤100 μg L^-1). Sorption kinetics and equilibrium isotherms were obtained, as well as the confirmation that the aging degree of microplastics plays a major role in their sorption capacities. The results show an increased sorption of several OMPs on aged microplastics when compared to pristine samples, i.e. the sorption capacity increasing from one or two sorbed substances (maximum 3 μg g^-1 per sorbate) up to nine after aging (maximum 10 μg g^-1 per sorbate). The extent of sorption depends on the OMP, polymer and the effectiveness of the aging treatment. The modifications (e.g. in the chemical structure) between virgin and aged microplastics were linked to the increased sorption capacity of certain OMPs, allowing to better understand the different affinities observed. Additionally, phytotoxicity tests were performed to evaluate the mobility of the OMPs sorbed on the microplastics and the potential effects (on germination and early growth) of the combo on two species of plants (Lepidium sativum and Sinapis alba). These tests suggest low or no phytotoxicity effect under the conditions tested but indicate a need for further research on the behavior of microplastics on soil-plant systems.

Intensification strategies for cytostatics degradation by ozone-based processes in aqueous phase

Over the past decade there has been an increasing concern on the presence of cytostatics (also known as anticancer drugs) in natural waterbodies. The conventional wastewater treatments seem not to be effective enough to remove them, and therefore new processes must be considered. This work investigates the performance of ozonation (O₃), catalytic ozonation (O₃/Fe²⁺) and peroxone (O₃/H₂O₂) processes, under dark or UV radiation conditions, for the degradation of cytostatics of worldwide concern. The degradation of bicalutamide (a representative of recalcitrant cytostatics) was firstly assessed in batch and then in a tubular column reactor (continuous flow mode runs) using a wastewater treatment plant (WWTP) secondary effluent. Bicalutamide removal ranged between 66 % (O₃) and 98 % (O₃/H₂O₂/UV) in continuous flow mode runs, the peroxone process being the most effective. The performance of these processes was then assessed against a mixture of twelve cytostatics of worldwide concern spiked in the WWTP effluent (25-350 ng/L). After treatment, seven cytostatics were completely removed, whereas the five most recalcitrant ones were eliminated to an extent of 8-92 % in O₃/H₂O₂, and 44-95 % in O₃/H₂O₂/UV. Phytotoxicity tests revealed a noticeable reduction in the effluent toxicity, demonstrating the feasibility of these processes in realistic conditions as tertiary treatment.

Antibiotics removal from aquaculture effluents by ozonation: chemical and toxicity descriptors

Antibiotics are often applied in aquaculture to prevent fish diseases. These substances can cause disturbances on receiving waters, when not properly eliminated from the aquaculture effluents. In this work, ozone (O₃) was investigated as a possible oxidizing agent to remove fishery antibiotics from aquaculture effluents: florfenicol (FF), oxytetracycline (OTC), sulfadimethoxine (SDM), sulfamethoxazole (SMX), and trimethoprim (TMP). Batch experiments were performed using ultrapure water and aquaculture effluents spiked with a mixture of target antibiotics at relatively high concentrations (10 mg L^-1 each). OTC, SMX and TMP were fully removed (< 30 min) regardless of the tested conditions, mainly by O₃ direct attack. In contrast, FF was partially removed in 30 min (∼ 10 and 60%, in aquaculture effluents and ultrapure water, respectively), but only in the presence of hydroxyl radicals (HO^•), the FF concentrations reaching levels below the detection limits in ultrapure water after 60 min. In the case of SDM, its degradation was highly influenced by the selected water matrix, but with removals always higher than 68%. In continuous-flow experiments applying more environmentally relevant antibiotic concentrations (100 ng L^-1 each) and low O₃ doses (1.5 mg L^-1), ozonation highly removed (> 98%) all tested antibiotics from aquaculture effluents with a hydraulic retention time (HRT) of 10 min, except FF (68%). Although by-products were detected in treated samples, zebrafish (Danio rerio) embryotoxicity tests did not show a toxicity increase by applying this ozonation treatment. Ozonation is thus a possible solution to remove antibiotics from aquaculture effluents. Still, full-scale studies in aquaculture farms are needed, and generation of HO^• may be favoured to readily oxidize the FF antibiotic.

Synthesis of low-density polyethylene derived carbon nanotubes for activation of persulfate and degradation of water organic micropollutants in continuous mode

Plastic derived carbon nanotubes (CNTs) were tested as catalysts in persulfate activation for the first time. Four catalysts were prepared by wetness impregnation and co-precipitation (using Al₂O₃, Ni, Fe and/or Al) and implemented to grow CNTs by chemical vapour deposition (CVD) using low-density polyethylene (LDPE) as carbon feedstock. A catalyst screening was performed in batch mode and the best performing CNTs (CNT@Ni+Fe/Al₂O₃-cp) led to a high venlafaxine mass removal rate (3.17 mg g^-1 h^-1) in ultrapure water after 90 min (even with a mixture of micropollutants). Its degradation increased when the matrix was replaced by drinking water and negligibly affected in surface water. A composite polymeric membrane was then fabricated with CNT@Ni+Fe/Al₂O₃-cp and polyvinylidene fluoride (PVDF), a high venlafaxine mass removal rate in surface water being also observed in 24 h of continuous operation. Therefore, the results herein reported open a window of opportunity for the valorisation of plastic wastes in this catalytic application performed in continuous mode.

Advanced oxidation technologies and constructed wetlands in aquaculture farms: What do we know so far about micropollutant removal?

Aquaculture is the fastest growing animal food-producing sector. Water is the central resource for aquaculture, and it is essential that its quality be preserved. Micropollutants (MPs) can reach aquaculture through anthropogenic addition or inlet water, and may cause harmful effects such as endocrine disruption and antibiotic resistance, adversely affecting the fish species being farmed. Furthermore, the discharge of aquaculture effluents into the environment may contribute to the deterioration of water courses. In this sense, the implementation of environmentally responsible measures in aquaculture farms is imperative for the protection of ecosystems and human health. The European Commission (EC) has recently launched a guiding document promoting ecological aquaculture practices; however, options for water treatment are still lacking. Conventional processes are not designed to deal with MPs; this review article consolidates relevant information on the application of advanced oxidation technologies (AOTs) and constructed wetlands (CWs) as potential strategies in this regard. Although 161 studies on the application of AOTs or CWs in aquaculture have already been published, only 34 focused on MPs (28 on AOTs and 6 on CWs), whereas the others reported the removal of contaminants such as bacteria, organic matter, solids and inorganic ions. No study coupling both treatments has been reported to date for the removal of MPs from aquaculture waters. AOTs and CWs are prospective alternatives for the treatment of aquacultural aqueous matrices. However, the type of aquaculture activity and the specifications of these available technologies should be considered while selecting the most suitable treatment option.

Selecting the most environmentally friendly oxidant for UVC degradation of micropollutants in urban wastewater by assessing life cycle impacts: Hydrogen peroxide, peroxymonosulfate or persulfate?

The quality of water bodies has been decreasing over time. Urban wastewater treatment plants (UWWTPs) are key players to avoid that potentially toxic micropollutants reach the environment, and advanced treatment processes are being applied to address this issue. However, several variables have to be taken into account, particularly environmental sustainability. The aim of this study is to assess the life cycle impacts of combining UVC with different oxidants - hydrogen peroxide (H₂O₂), peroxymonosulfate (PMS) and persulfate (PS) -, considering different concentrations (0.05, 0.20 and 0.50 mM) and UVC dosages of 42, 63 and 170 J/L, corresponding to UV contact times of 4, 7 and 18 s in a specific industrial equipment. UVC/PMS was the worst performing process (despite being able to achieve removals similar to UVC/H₂O₂), followed by UVC/PS. Both would only be preferred relatively to H₂O₂ if much lower concentrations of PMS or PS could be used to achieve the same removal of micropollutants (10 times lower was not enough). Additionally, PMS and PS production contributes more to the environmental footprint than the electricity use, unlike H₂O₂. Therefore even if considering lower treatment times when using sulfate-based oxidants, these will still be more impactful than using H₂O₂ at the studied conditions. Based on both avoided and generated impacts, H₂O₂ is the best option environmentally. In this case, the environmental impacts are more affected by an increase in treatment time rather than by an increase in the H₂O₂ concentration. It is thus best to opt for a higher concentration and the lowest treatment time possible for a significant ecotoxicity reduction. Electricity is a relevant parameter in all cases and its impact can be reduced in nearly all endpoint categories by opting for cleaner energy sources.

Overgrowth control of potentially hazardous bacteria during storage of ozone treated wastewater through natural competition

Improving the chemical and biological quality of treated wastewater is particularly important in world regions under water stress. In these regions, reutilization of wastewater is seen as an alternative to reduce water demand, particularly for agriculture irrigation. In a reuse scenario, the treated wastewater must have enough quality to avoid chemical and biological contamination of the receiving environment. Ozonation is among the technologies available to efficiently remove organic micropollutants and disinfect secondary effluents, being implemented in full-scale urban wastewater treatment plants worldwide. However, previous studies demonstrated that storage of ozone treated wastewater promoted the overgrowth of potentially harmful bacteria, putting at risk its reutilization, given for instance the possibility of contaminating the food-chain. Therefore, this study was designed to assess the potential beneficial role of inoculation of ozone treated wastewater with a diverse bacterial community during storage, for the control of the overgrowth of potentially hazardous bacteria, through bacterial competition. To achieve this goal, ozone treated wastewater (TWW) was diluted with river water (RW) in the same proportion, and the resulting bacterial community (RW+TWW) was compared to that of undiluted TWW over 7 days storage. As hypothesized, in contrast to TWW, where dominance of Beta- and Gammaproteobacteria, namely Pseudomonas spp. and Acinetobacter spp., was observed upon storage for 7 days, the bacterial communities of the diluted samples (RW+TWW) were diverse, resembling those of RW. Moreover, given the high abundance of antibiotic resistance genes in RW, the concentration of these genes in RW+TWW did not differ from that of the non-ozonated controls (WW, RW and RW+WW) over the storage period. These results highlight the necessity of finding a suitable pristine diverse bacterial community to be used in the future to compete with bacteria surviving ozonation, to prevent reactivation of undesirable bacteria during storage of treated wastewater.

Aging assessment of microplastics (LDPE, PET and uPVC) under urban environment stressors

The changes in the chemical structure, surface morphology and crystallinity are reported for three different polymers (LDPE, PET and uPVC) in microplastic form, after being artificially exposed to different aging agents that can affect microplastics in urban environments: ozone, UV-C, and solar radiation. In parallel to the laboratory experiments, the microplastics were exposed to real weathering conditions for three-months in a building rooftop located in the city of Porto (Portugal). By analysing the (virgin and aged) microplastic samples periodically through ATR-FTIR spectroscopy and estimating the Carbonyl Index, it was possible to sketch the aging degree evolution through time and identify the most aggressive agents for each polymer regarding the changes in their chemical structure. SEM and XRD measurements allowed to complement the ATR-FTIR results, giving a more complete picture of the effects of each treatment on each polymer and suggesting that ATR-FTIR measurements are not sufficient to correctly evaluate the aging degree of microplastics. The changes observed in the microplastic particles studied support the theory that microplastics in the environment undergo aging and change their characteristics through time, potentially affecting their behavior and intensifying their impacts.

Ozonation of cytostatic drugs in aqueous phase

As the number of cancer patients increases, so does the consumption of cytostatic drugs, which are commonly used in chemotherapy. These compounds are already ubiquitous in wastewater treatment plant (WWTP) effluents and natural water streams, revealing the urgent need for efficient technologies for their removal from the aqueous phase. This work presents the elimination of five cytostatics of concern, found in Portuguese WWTP effluents: bicalutamide (BICA), capecitabine (CAP), cyclophosphamide (CYC), ifosfamide (IFO) and mycophenolic acid (MPA), using non-catalytic ozonation. Experiments were performed starting from trace-level concentrations (1 μM) for all cytostatics at neutral pH (pH: 7.3 ± 0.1) and room temperature (23 ± 1 °C), employing different ozone dosages. Under the studied conditions, CAP and MPA were quickly eliminated by direct ozonation, whereas BICA, CYC and IFO were more slowly degraded, as they undergo a breakdown via hydroxyl radicals generation (HO) exclusively. Increasing the O₃ dosage from 1 to 3 mg_O3/mg_DOC, CAP, MPA and IFO were completely removed, and BICA and CYC were converted more than 90% after 180 min. The presence of both inorganic ions and organic matter in real water matrices (river water, WWTP secondary effluent) did not affect the removal of CAP and MPA. Nonetheless, there was an inefficient and very fast O₃ consumption that resulted in only around 30% elimination of BICA, CYC and IFO, even if the reaction time is extended.

Rethinking water treatment targets: Bacteria regrowth under unprovable conditions

Ozonation is among the currently used technologies to remove chemical and biological contaminants from secondary treated urban wastewater (UWW). Despite its effectiveness on the abatement of organic micropollutants (OMPs) and disinfection, previous studies have shown that regrow of bacteria may occur upon storage of the ozonated UWW. This reactivation has been attributed to the high content of assimilable organic carbon after treatment. In order to investigate if ozonation by-products are the main biological regrowth drivers in stored ozonated UWW, the ozonation surviving cells were resuspended in sterile bottled mineral water (MW), simulating a pristine oligotrophic environment. After 7 days storage, organisms such as Acinetobacter, Methylobacterium, Cupriavidus, Massilia, Acidovorax and Pseudomonas were dominant in both ozonated UWW and pristine MW, demonstrating that bacterial regrowth is not strictly related to the eventual presence of ozonation by-products, but instead with the ability of the surviving cells to cope with nutrient-poor environments. The resistome of UWW before and after ozonation was analysed by metagenomic techniques. Draft metagenome assembled genomes (dMAGs), recovered from both ozonated UWW and after cell resuspension in MW, harboured genes conferring resistance to diverse antibiotics classes. Some of these antibiotic resistance genes (ARGs) were located in the vicinity of mobile genetic elements, suggesting their potential to be mobilized. Among these, dMAGs affiliated to taxa with high relative abundance in stored water, such as P. aeruginosa and Acinetobacter spp., harboured ARGs conferring resistance to 12 and 4 families of antibiotics, respectively, including those encoding carbapenem hydrolysing oxacillinases. The results herein obtained point out that the design and development of new wastewater treatment technologies should include measures to attenuate the imbalance of the bacterial communities promoted by storage of the final treated wastewater, even when applying processes with high mineralization rates.

An Improved LC-MS/MS Method for the Analysis of Thirteen Cytostatics on Workplace Surfaces

Cytostatics are drugs used in cancer treatment, which pose serious risks to healthcare workers. Dermal absorption via surface contamination is the key exposure route; thus, rapid, reliable, and validated analytical methods for multicomponent detection are crucial to identify the exposure risk. A surface-wipe-sampling technique compatible with hospitals' safety requirements (gauze, 1 mL isopropanol) and a fast and simple extraction method (1 mL acetonitrile, 20 min ultrasonic bath, evaporation, reconstitution in 200 µL acetonitrile), coupled with liquid chromatography-tandem mass spectrometry analysis, were developed. It allowed identification and quantification of 13 cytostatics on surfaces: cyclophosphamide, doxorubicin, etoposide, ifosfamide, paclitaxel, bicalutamide, capecitabine, cyproterone, flutamide, imatinib, megestrol, mycophenolate mofetil, prednisone. Good linearity, sensitivity, and precision were achieved (R² > 0.997, IDLs < 4.0 pg/cm², average CV 16%, respectively). Accuracy for four model surfaces (melamine-coated wood, phenolic compact, steel 304, steel 316) was acceptable (80 ± 12%), except for capecitabine and doxorubicin. Global uncertainty is below 35% for concentrations above 100 pg/cm² (except for capecitabine and doxorubicin)-a guidance value for relevant contamination. Method application in a Portuguese university hospital (28 samples) identified the presence of seven cytostatics, at concentrations below 100 pg/cm², except for three samples. The widespread presence of cyclophosphamide evinces the necessity to review implemented procedures.

Carbon xerogels combined with nanotubes as solid-phase extraction sorbent to determine metaflumizone and seven other surface and drinking water micropollutants

Carbon xerogels (CXs) were synthesized by polycondensation of resorcinol and formaldehyde, followed by thermal annealing, and subjected to hydrothermal oxidation. Solid-phase extraction (SPE) cartridges were filled with CXs and tested for extraction of metaflumizone and other seven environmental micropollutants (acetamiprid, atrazine, isoproturon, methiocarb, carbamazepine, diclofenac, and perfluorooctanesulfonic acid) before chromatographic analysis. The recoveries obtained with the pristine CX were low for most analytes, except for metaflumizone (69 ± 5%). Moreover, it was concluded that the adsorption/desorption process of the micropollutants performed better on CXs with a less acidic surface (i.e., pristine CX). Thus, cartridges were prepared with pristine CX and multi-walled carbon nanotubes (MWCNTs) in a multi-layer configuration. This reusable cartridge was able to simultaneously extract the eight micropollutants and was used to validate an analytical methodology based on SPE followed by ultra-high performance liquid chromatography-tandem mass spectrometry. A widespread occurrence of 6/8 target compounds was observed in surface water collected in rivers supplying three drinking water treatment plants and in the resulting drinking water at the endpoint of each distribution system. Therefore, the first study employing CXs and MWCNTs as sorbent in multi-layer SPE cartridges is herein reported as a proof of concept for determination of multi-class water micropollutants.

UV-A activation of peroxymonosulfate for the removal of micropollutants from secondary treated wastewater

The occurrence of micropollutants (MPs) in the aquatic environment poses a threat to the environment and to the human health. The application of sulfate radical-based advanced oxidation processes (SR-AOPs) to eliminate these contaminants has attracted attention in recent years. In this work, the simultaneous degradation of 20 multi-class MPs (classified into 5 main categories, namely antibiotics, beta-blockers, other pharmaceuticals, pesticides, and herbicides) was evaluated for the first time in secondary treated wastewater, by activating peroxymonosulfate (PMS) with UV-A radiation, without any pH adjustment or iron addition. The optimal PMS concentration to remove the spiked target MPs (100 μg L^-1) from wastewater was 0.1 mM, leading to an average degradation of 80% after 60 min, with most of the elimination occurring during the first 5 min. Synergies between radiation and the oxidant were demonstrated and quantified, with an average extent of synergy of 69.1%. The optimized treatment was then tested using non-spiked wastewater, in which 12 out of the 20 target contaminants were detected. Among these, 7 were degraded at some extent, varying from 10.7% (acetamiprid) to 94.4% (ofloxacin), the lower removals being attributed to the quite inferior ratio of MPs to natural organic matter. Phytotoxicity tests carried out with the wastewater before and after photo-activated PMS oxidation revealed a decrease in the toxicity and that the plants were able to grow in the presence of the treated water. Therefore, despite the low degradation rates obtained for some MPs, the treatment effectively reduces the toxicity of the matrix, making the water safer for reuse.

Advances on Graphyne-Family Members for Superior Photocatalytic Behavior

Graphyne (GY) and graphdiyne (GDY) have been employed in photocatalysis since 2012, presenting intriguing electronic and optical properties, such as high electron mobility and intrinsic bandgap due to their high π-conjugated structures. Authors are reporting the enhanced photocatalytic efficiency of these carbon allotropes when combined with different metal oxides or other carbon materials. However, the synthesis of graphyne-family members (GFMs) is still very recent, and not much is known about the true potential of these photocatalytic materials. In this review article, the implications of different synthesis routes on the structural features and photocatalytic properties of these materials are elucidated. The application of GFMs in the nicotinamide adenine dinucleotide (NADH) regeneration, hydrogen and oxygen evolution, and carbon dioxide reduction is discussed, as well as in the degradation of pollutants and bacteria inactivation in water and wastewater treatment.

A life cycle assessment of solar-based treatments (H2O2, TiO2 photocatalysis, circumneutral photo-Fenton) for the removal of organic micropollutants

Micropollutants have been linked to freshwater and human toxicity. Their occurrence in water bodies arises from different causes, including the discharge of effluents from conventional urban wastewater treatment plants, which are not designed for their removal. The addition of an advanced treatment process for this purpose will allow a toxicity reduction; however, such will also imply further resources and energy use resulting in other environmental impacts. Energy use is a particularly relevant hotspot of the environmental impacts associated with advanced treatments; therefore, solar-based treatments have great potential in this field. The present study assessed the environmental impacts via life cycle assessment (LCA) of five solar-based treatments - solar photolysis (with and without H₂O₂), photocatalysis using TiO₂ (with and without H₂O₂) and circumneutral photo-Fenton - using a pilot-scale compound parabolic collector photoreactor to select the most suitable option for the removal of micropollutants (carbamazepine, diclofenac and sulfamethoxazole; 5 μg/L) from a secondary-treated wastewater. The ranking of solar treatments per highest generated impacts is, overall, as follows: circumneutral photo-Fenton > TiO₂-P25/H₂O₂ > TiO₂-P25 > solar/H₂O₂ > solar. While solar photolysis uses fewer resources and energy, thus generating lower environmental impacts, the common incomplete mineralization of the parent micropollutants implies that toxicity reduction cannot be guaranteed in this case. Aiming for a balance between ecotoxicity reduction and the impacts caused by the application of each technology, the solar TiO₂-P25 treatment, which was here investigated by LCA for the first time to remove organic micropollutants from secondary-treated urban wastewater, appears to be the most suitable option at the studied conditions (and when TiO₂ is reused at least 5 times). One of the environmental downfalls of the assessed treatments is the energy required to produce the chemicals, and so the importance of minimizing external energy use during the application of advanced treatment processes is reinforced.

Graphitic carbon nitride photocatalysis: the hydroperoxyl radical role revealed by kinetic modelling

The behaviour of graphitic carbon nitride photocatalysis for phenol removal and H2O2 evolution was fully analysed by kinetic modelling, rediscovering the contribution of oxygen, reactive oxygen species, photogenerated holes and intermediate products.

Liquid-liquid extraction as a simple tool to quickly quantify fourteen cytostatics in urban wastewaters and access their impact in aquatic biota

Cytostatics are highly toxic pharmaceuticals used in the treatment of cancer. These substances are partially excreted by the human body after administration. The inefficient removal of some cytostatics in urban wastewater treatment plants (WWTPs) allows them to reach surface waters and consequently the aquatic biota. However, information about their occurrence in urban wastewaters is available only for certain active ingredients. A liquid-liquid extraction method coupled to liquid-chromatography-tandem mass spectrometry analysis was developed, allowing the identification and quantification of 14 cytostatics in wastewater samples, avoiding the use of expensive sorbents. Moreover, satisfactory cytostatics' recoveries were achieved when the new method was applied to wastewaters from a Portuguese WWTP: average of (74 ± 21)% for the influents, (83 ± 22)% for secondary effluents, and (94 ± 24)% for tertiary effluents collected after UV treatment, except for imatinib. Doxorubicin, etoposide, megestrol and prednisone were completely eliminated in the first stage of the WWTP treatment (i.e. detected in the influents, but not in the effluents). Bicalutamide, capecitabine, cyclophosphamide, ifosfamide and mycophenolic acid were recalcitrant to UV radiation (i.e. detected in tertiary effluents), ifosfamide being the cytostatic most difficult to be removed (its concentration did not decrease from the entrance to the outlet of the WWTP). The risk at which aquatic organisms might be subjected, due to their exposure to cytostatics' concentrations 10-times lower than those found in the tertiary effluents, was estimated and it was verified that mycophenolic acid may represent a high risk. Although no risk was estimated for the other cytostatics, the risks associated to long-term and synergic exposure should not be ruled out.

Adsorption of Sudan-IV contained in oily wastewater on lipophilic activated carbons: kinetic and isotherm modelling

Up to nine kinetic and fourteen isotherm adsorption models are employed to model the adsorption of Sudan IV, a lipophilic model pollutant present in a biphasic mixture of cyclohexane-water system to simulate oily wastewater. Six different modified activated carbons were used as adsorbents. The highest amount adsorbed of Sudan IV was found in the material prepared by successive treatments of the parent commercial activated carbon Norit ROX 0.8 with nitric acid and urea, followed by thermal treatment at 800 °C under continuous flow of nitrogen. Kinetic and isotherm adsorption models can be employed to simulate the process, since the effect of the presence of water in the adsorption of Sudan IV from the cyclohexane phase was found to be negligible, owing to the high lipophilic character of both adsorbent and adsorbate. All kinetic and isotherm coefficients, coupling with statistical parameters (r², adjusted r² and sum of squared errors), are determined by non-linear regression fitting and compared to literature data. The model of Avrami is found to be the most appropriate model to represent the adsorption of the pollutant in any of the six modified carbons tested, the highest value of the kinetic constant being 0.055 min^-1. The isotherm adsorption is well-modelled by using the general isotherm equation of Tóth and the multilayer Jovanović expression for the adsorption of Sudan-IV on that material, resulting in a high monolayer uptake capacity (q_m = 193.6 mg g^-1).

Degradation of methylparaben by sonocatalysis using a Co-Fe magnetic carbon xerogel

The degradation of methylparaben (MP) through 20 kHz ultrasound coupled with a bimetallic Co-Fe carbon xerogel (CX/CoFe) was investigated in this work. Experiments were performed at actual power densities of 25 and 52 W/L, catalyst loadings of 12.5 and 25 mg/L, MP concentrations between 1 and 4.2 mg/L and initial pH values between 3 and 10 in ultrapure water (UPW). Matrix effects were studied in bottled water (BW) and secondary treated wastewater (WW), as well as in UPW spiked with bicarbonate, chloride or humic acid. The pseudo-first order kinetics of MP degradation increase with power and catalyst loading and decrease with MP concentration and matrix complexity; moreover, the reaction is also favored at near-neutral conditions and in the presence of dissolved oxygen. The contribution of the catalyst is synergistic to the sonochemical degradation of MP and the extent of synergy is quantified to be >45%. This effect was ascribed to the ability of CX/CoFe to catalyze the dissociation of hydrogen peroxide, formed through water sonolysis, to hydroxyl radicals. Experiments in UPW spiked with an excess of tert-butanol (radical scavenger), sodium dodecyl sulfate or sodium acetate (surfactants) led to substantially decreased rates (i.e. by about 8 times), thus implying that the liquid bulk and the gas-liquid interface are major reaction sites. The stability of CX/CoFe was shown by performing reusability cycles employing magnetic separation of the catalyst after the treatment stage. It was found that the CX/CoFe catalyst can be reused in up to four successive cycles without noteworthy variation of the overall performance of the sonocatalytic process.

Microplastics in the environment: A DPSIR analysis with focus on the responses

This review organizes key information about microplastic pollution through a DPSIR (driving forces, pressures, states, impacts and responses) analysis, namely the current knowledge on the sources of microplastics in the environment, the abundance, mobility and fate of microplastics distributed across the different environmental compartments, as well as their socio-economic and environmental impacts. The available or developing upstream and downstream responses to the microplastic pollution are also reviewed as part of the DPSIR analysis. These include the regulatory and policy instruments, environmental education campaigns, product design, the development of biodegradable plastics, environmental cleanups, waste management, drinking water and wastewater treatment plants, and other treatment technologies and processes. Whenever possible, the current trends and discerning gaps in the research conducted so far by the scientific community are identified, giving some clues to what is going to be the future research on this topic and into new lines of research.

Hummers' and Brodie's graphene oxides as photocatalysts for phenol degradation

Undoped metal-free graphene oxide (GO) materials prepared by either a modified Hummers' (GO-H) or a Brodie's (GO-B) method were tested as photocatalysts in aqueous solution for the oxidative conversion of phenol. In the dark, the adsorptive capacity of GO-B towards phenol (~35%) was higher than that of GO-H (~15%). Upon near-UV/Vis irradiation, GO-H was able to remove 21% of phenol after 180 min, mostly through adsorption. On the other hand, by using less energetic visible irradiation, GO-B removed as much as 95% in just 90 min. By thorough characterization of the prepared materials (SEM, HRTEM, TGA, TPD, Raman, XRD, XPS and photoluminescence) the observed performances could be explained in terms of their different surface chemistries. The GO-B presents the lower concentration of oxygen functional groups (in particular carbonyl groups as revealed by XPS) and it has a considerably higher photocatalytic activity compared to GO-H. Photoluminescence (PL) of liquid dispersions and XRD analysis of powders showed lower PL intensity and smaller interlayer distance for GO-B relative to GO-H, respectively: this suggests lower electron-hole recombination and enhanced electron transfer in GO-B, in support of its boosted photocatalytic activity. Reusability tests showed no efficiency loss after a second usage cycle and over three runs under visible irradiation, which was in line with the similarity of the XPS spectra of the fresh and used GO-B materials. Moreover, scavenging studies revealed that holes and hydroxyl radicals were the main reactive species in play during the photocatalytic process. The obtained results, establish for the first time, that GO prepared by Brodie's method is an active and stable undoped metal-free photocatalyst for phenol degradation in aqueous solutions, opening new paths for the application of more sustainable and metal-free materials for water treatment solutions.

Distribution of micropollutants in estuarine and sea water along the Portuguese coast

This work provides the first spatial distribution report of micropollutants (MPs) in the entire Portuguese coast, comprising the ocean shore (sea water, SW) and whenever possible the nearest river discharging on it (estuarine water, EW). This surface water monitoring programme aimed to assess the spatial distribution of 37 MPs with a wide chemical nature, including some substances prioritized by the European Union Directive 39/2013/EU and contaminants of emerging concern targeted in the Watch List of Decisions 495/2015/EU and 840/2018/EU. The risk quotients were estimated in each sampling point for the detected MPs. High concentrations of diclofenac, tramadol and carbamazepine were determined, the latter with medium to high risk for algae. Some pharmaceuticals and perfluorooctanesulfonic acid (PFOS) were broadly distributed, maybe due to the direct discharge into the sea. Atrazine and alachlor were found in the majority of the samples, with alachlor levels often considered as medium to high risk.

Removal of microorganisms and antibiotic resistance genes from treated urban wastewater: A comparison between aluminium sulphate and tannin coagulants

The presence of antibiotic resistant-bacteria (ARB) and antibiotic resistance genes (ARG) in treated effluents of urban wastewater treatment plants (WWTP) may represent a threat to the environment and public health. Therefore, cost-effective technologies contributing to minimize loads of these contaminants in the final effluents of WWTP are required. This study aimed at assessing the capacity of coagulation to reduce the ARB&ARG load in secondary treated urban wastewater (STWW), as well as the impact of the process on the structure and diversity of the bacterial community. Coagulation performance using aluminium sulphate, a synthetic substance, and tannins, a biowaste, was compared. Samples were analysed immediately before (STWW) and after the coagulation treatment (Alu, Tan), as well as after 3-days storage in the dark at room temperature (RSTWW, RAlu, RTan), to assess possible reactivation events. Both coagulants decreased the turbidity and colour and reduced the bacterial load (16S rRNA gene copy number, total heterotrophs (HET), and ARB (faecal coliforms resistant to amoxicillin (FC/AMX) or ciprofloxacin (FC/CIP) up to 1-2 log immediately after the treatment. Both coagulants reduced the load of intl1, but in average, aluminium sulphate was able to decrease the content of the analysed ARGs (bla_TEM and qnrS) to lower levels than tannin. Reactivation after storage was observed mainly in RTan. In these samples the load of the culturable populations and qnrS gene prevalence increased, sometimes to values higher than those found in the initial wastewater. Reactivation was also characterized by an increment in Gammaproteobacteria relative abundance in the bacterial community, although with distinct patterns for RTan and RAlu. Curvibacter, Undibacterium and Aquaspirillum were among the most abundant genera in RAlu and Aeromonas, Pseudomonas and Stenotrophomonas in RTan. These bacterial community shifts were in agreement with the variations in the culturable bacterial counts of HET for RTan and FC/CIP for RAlu. In summary, the overall performance of aluminium sulphate was better than that of tannins in the treatment of treated urban wastewater.

Quenchers in advanced oxidation technologies for analysis of micropollutants by liquid chromatography coupled to mass spectrometry: Sodium sulphite or catalase?

This work aimed to investigate the possible effect of 2 quenchers commonly used in H₂O₂-based advanced oxidation technologies (AOTs), i.e. catalase and sodium sulphite (Na₂SO₃), on the analytical signal of 3 detectors coupled to liquid chromatography (LC): tandem mass spectrometry (LC-MS/MS), fluorescence detection (LC-FD) and LC-diode array detection (LC-DAD). The observation of analytical interferences for a group of compounds when studying the removal by continuous mode UV/H₂O₂ of 26 micropollutants (MPs) from a spiked surface water (SW), for which the residual H₂O₂ in the samples was quenched by Na₂SO₃, triggered the need of understanding these effects and thus catalase was used as comparative quencher. From the 26 MPs having a wide range of polarity and pK_a, those monitored after electrospray ionization (ESI) under positive ionization (PI) mode and presenting a pK_a higher than 5.9 revealed a great signal suppression, but only when using Na₂SO₃ as H₂O₂ quencher. In this sense, we further explored this effect by selecting 2 MPs, metoprolol and diclofenac, which had respectively signal suppression and no interference in the LC-MS/MS response. These MPs were analysed before and after addition of H₂O₂ and catalase or Na₂SO₃ in reaction vials, using: (i) different detectors coupled to LC, namely LC-MS/MS with ESI under PI and negative ionization (NI) modes, LC-FD and LC-DAD; (ii) different environmental matrices (SW, drinking water, wastewater) and ultrapure water; and (iii) different magnitude levels (0.1-10 mg L^-1). The results demonstrated a remarkable signal suppression in LC-MS/MS analyses under PI mode for those compounds with pK_a higher than 5.9, confirming the interfering effect of H₂O₂/Na₂SO₃. To the best of our knowledge, the analytical interference in the LC-MS/MS analysis, after adding Na₂SO₃ to quench H₂O₂ in AOTs experiments was never reported before and the results presented herein support the recommendation to use catalase instead of Na₂SO₃ as quencher in AOTs studies.

Continuous ozonation of urban wastewater: Removal of antibiotics, antibiotic-resistant Escherichia coli and antibiotic resistance genes and phytotoxicity

This work evaluated the removal of a mixture of eight antibiotics (i.e. ampicillin (AMP), azithromycin (AZM), erythromycin (ERY), clarithromycin (CLA), ofloxacin (OFL), sulfamethoxazole (SMX), trimethoprim (TMP) and tetracycline (TC)) from urban wastewater, by ozonation operated in continuous mode at different hydraulic retention times (HRTs) (i.e. 10, 20, 40 and 60 min) and specific ozone doses (i.e. 0.125, 0.25, 0.50 and 0.75 gO₃ gDOC^{- 1}). As expected, the efficiency of ozonation was highly ozone dose- and contact time-dependent. The removal of the parent compounds of the selected antibiotics to levels below their detection limits was achieved with HRT of 40 min and specific ozone dose of 0.125 gO₃ gDOC^{- 1}. The effect of ozonation was also investigated at a microbiological and genomic level, by studying the efficiency of the process with respect to the inactivation of Escherichia coli and antibiotic-resistant E. coli, as well as to the reduction of the abundance of selected antibiotic resistance genes (ARGs). The inactivation of total cultivable E. coli was achieved under the experimental conditions of HRT 40 min and 0.25 gO₃ gDOC^-1, at which all antibiotic compounds were already degraded. The regrowth examinations revealed that higher ozone concentrations were required for the permanent inactivation of E. coli below the Limit of Quantification (<LOQ = 0.01 CFU mL^{- 1}). Also, the abundance of the examined ARGs (intl1, aadA1, dfrA1, qacEΔ1 and sul1) was found to decrease with increasing HRT and ozone dose. Despite the fact that the mildest operating parameters were able to eliminate the parent compounds of the tested antibiotics in wastewater effluents, it was clearly demonstrated in this study that higher ozone doses were required in order to confer permanent damage and/or death and prevent potential post-treatment re-growth of both total bacteria and ARB, and to reduce the abundance of ARGs below the LOQ. Interestingly, the mineralization of wastewater, in terms of Dissolved Organic Carbon (DOC) removal, was found to be significantly low even when the higher ozone doses were applied, leading to an increased phytotoxicity towards various plant species. The findings of this study clearly underline the importance of properly optimising the ozonation process (e.g. specific ozone dose and contact time) taking into consideration both the bacterial species and associated ARGs, as well as the wastewater physicochemical properties (e.g. DOC), in order to mitigate the spread of ARB&ARGs, as well as to reduce the potential phytotoxicity.

Consolidated vs new advanced treatment methods for the removal of contaminants of emerging concern from urban wastewater

Urban wastewater treatment plants (WWTPs) are among the main anthropogenic sources for the release of contaminants of emerging concern (CECs) into the environment, which can result in toxic and adverse effects on aquatic organisms and consequently on humans. Unfortunately, WWTPs are not designed to remove CECs and secondary (e.g., conventional activated sludge process, CAS) and tertiary (such as filtration and disinfection) treatments are not effective in the removal of most CECs entering WWTP. Accordingly, several advanced treatment methods have been investigated for the removal of CECs from wastewater, including consolidated (namely, activated carbon (AC) adsorption, ozonation and membranes) and new (such as advanced oxidation processes (AOPs)) processes/technologies. This review paper gathers the efforts of a group of international experts, members of the NEREUS COST Action ES1403 who for three years have been constructively discussing the state of the art and the best available technologies for the advanced treatment of urban wastewater. In particular, this work critically reviews the papers available in scientific literature on consolidated (ozonation, AC and membranes) and new advanced treatment methods (mainly AOPs) to analyse: (i) their efficiency in the removal of CECs from wastewater, (ii) advantages and drawbacks, (iii) possible obstacles to the application of AOPs, (iv) technological limitations and mid to long-term perspectives for the application of heterogeneous processes, and (v) a technical and economic comparison among the different processes/technologies.

Monitoring of the 17 EU Watch List contaminants of emerging concern in the Ave and the Sousa Rivers

The occurrence of micropollutants in the environment is a matter of high concern. Some regulations have been published in the last years and a Watch List of contaminants of emerging concern (CECs) for European Union monitoring of surface water was launched in the Decision 2015/495, including three estrogens (estrone, E1; 17-β-estradiol, E2; and 17-α-ethinylestradiol, EE2), four pharmaceuticals (diclofenac and the macrolide antibiotics azithromycin, clarithromycin and erythromycin), an anti-oxidant (2,6-ditert-butyl-4-methylphenol, BHT), an UV filter (2-ethylhexyl 4-methoxycinnamate, EHMC), some pesticides (methiocarb and the neonicotinoids imidacloprid, thiacloprid, thiamethoxam, clothianidin and acetamiprid) and two herbicides (oxadiazon and triallate). This study provides the first spatial and seasonal monitoring campaign in the Ave and the Sousa Rivers for the all set of the 17 Watch List CECs (not reported yet for any country), in order to assess their occurrence, distribution, frequency and risk assessment. It also highlights the need of extend the study to other regions and environmental matrices to investigate the occurrence and possible sources of contamination of CECs, aiming to give insights for decision makers to define mitigation strategies for a more sustainable water policy.

Constructed wetland microcosms for the removal of organic micropollutants from freshwater aquaculture effluents

The presence of organic micropollutants (MPs) in the aquatic environment is strongly related to their difficult elimination by conventional water and wastewater treatment processes. Therefore, alternative treatment technologies are required to overcome this problem. In this domain, constructed wetlands (CWs) have gained increasing attention in the last years, mainly due to the low-cost, simple operation/maintenance and environmental friendliness of these systems. However, studies on the application of CWs to remove MPs from freshwater aquaculture effluents are still scarce. In this work, planted (Phragmites australis) vertical subsurface flow CWs, at microcosm scale, were investigated for the removal of MPs found in non-spiked freshwater aquaculture effluents, namely atrazine, isoproturon, perfluorooctanesulfonic acid (PFOS), clarithromycin, erythromycin, fluoxetine, norfluoxetine, and 2-ethylhexyl-4-methoxycinnamate (EHMC). A wider multi-component set of 36 MPs was also studied by adding these MPs at 100 ng L^-1 to the same matrix (alachlor, atrazine, chlorfenvinphos, isoproturon, PFOS, azithromycin, clarithromycin, erythromycin, diclofenac, methiocarb, acetamiprid, clothianidin, thiacloprid, thiamethoxam, EHMC, simazine, atorvastatin, bezafibrate, carbamazepine, cephalexin, ceftiofur, citalopram, clindamycin, clofibric acid, diphenhydramine, enrofloxacin, fluoxetine, ketoprofen, metoprolol, norfluoxetine, ofloxacin, propranolol, tramadol, trimethoprim, venlafaxine, and warfarin). High weekly removal efficiencies (>87%) were observed for all MPs in both non-spiked and spiked experiments, with the exception of EHMC (removal rates between 0 and 86%). These results emphasize the potential of CWs to remove MPs from freshwater aquaculture effluents, but also the need to enhance the performance of these systems for the elimination of some recalcitrant MPs, such as EHMC, which was found at high concentrations in the studied effluents.

Spatial and seasonal occurrence of micropollutants in four Portuguese rivers and a case study for fluorescence excitation-emission matrices

The European Union (EU) has recommended the monitoring of specific priority substances (PSs, Directive 2013/39) and some contaminants of emerging concern (CECs, Decision 2015/495) in surface waterbodies. The present study provides spatial distributions and temporal variations of a wide range of multi-class PSs and CECs in four stressed rivers in Portugal (Ave, Leça, Antuã, and Cértima). Thirteen micropollutants were found in all four rivers, including the priority pesticide isoproturon (up to 92 ng L^-1), various pharmaceuticals (up to 396 ng L^-1), and the UV-filter 2-ethyl-hexyl-4-methoxycinnamate (EHMC, up to 562 ng L^-1) identified in Decision 2015/495. The industrial priority compound perfluorooctanesulfonic acid (PFOS) was found in three rivers (Antuã, Cértima, and Leça) below the method quantification limit, together with four pharmaceuticals not included in these EU guidelines. The already banned priority pesticide atrazine was detected in Ave, Antuã, and Leça (up to 41 ng L^-1) and simazine in Cértima and Leça (up to 26 ng L^-1). Acetamiprid and imidacloprid (included in Decision 2015/495) were only detected during the dry season in the Ave. Leça river was selected as a waterbody case study for assessment of fluorescence excitation-emission matrices (EEMs). These results matched the spatial distribution trend of micropollutants along the river, with stronger fluorescence response and higher concentrations being found downstream of industrial areas and urban wastewater treatment plants (WWTPs). Moreover, the fluorescence signature of surface water collected downstream of an urban WWTP aligned very well with that obtained for the respective WWTP effluent. Thus, actions are needed to preserve a good environmental status of these stressed European waterbodies.

Degradation of propyl paraben by activated persulfate using iron-containing magnetic carbon xerogels: investigation of water matrix and process synergy effects

An advanced oxidation process comprising an iron-containing magnetic carbon xerogel (CX/Fe) and persulfate was tested for the degradation of propyl paraben (PP), a contaminant of emerging concern, in various water matrices. Moreover, the effect of 20 kHz ultrasound or light irradiation on process performance was evaluated. The pseudo-first order degradation rate of PP was found to increase with increasing SPS concentration (25-500 mg/L) and decreasing PP concentration (1690-420 μg/L) and solution pH (9-3). Furthermore, the effect of water matrix on kinetics was detrimental depending on the complexity (i.e., wastewater, river water, bottled water) and the concentration of matrix constituents (i.e., humic acid, chloride, bicarbonate). The simultaneous use of CX/Fe and ultrasound as persulfate activators resulted in a synergistic effect, with the level of synergy (between 35 and 50%) depending on the water matrix. Conversely, coupling CX/Fe with simulated solar or UVA irradiation resulted in a cumulative effect in experiments performed in ultrapure water.

TiO2-based (Fe3O4, SiO2, reduced graphene oxide) magnetically recoverable photocatalysts for imazalil degradation in a synthetic wastewater

Magnetite (Fe₃O₄), a core-shell material (SiO₂@Fe₃O₄), and reduced graphene oxide-Fe₃O₄ (referred as rGO-MN) were used as supports of a specific highly active TiO₂ photocatalyst. Thermal treatments at 200 or 450 °C, different atmospheres (air or N₂), and TiO₂:support weight ratios (1.0, 1.5, or 2.0) were investigated. X-ray diffractograms revealed that magnetite is not oxidized to hematite when the core-shell SiO₂@Fe₃O₄ material-or a N₂ atmosphere (instead of air) in the thermal treatment-was employed to prepare the TiO₂-based catalysts (the magnetic properties being preserved). The materials treated with N₂ were first tested for degradation of imazalil (a well-known fungicide) in deionized water. The best compromise between the photocatalytic activity, magnetic separation, and Fe leached (1.61 mg L^-1, i.e., below the threshold for water reuse in irrigation) was found for the magnetic catalyst prepared with SiO₂@Fe₃O₄, an intermediate TiO₂:support ratio (1.5), and treated at 200 °C under N₂ atmosphere (i.e., SiO₂@Fe₃O₄-EST-1.5-200-N₂). This material was then tested for the treatment of imazalil in a synthetic wastewater, SW (with a chemical composition simulating an effluent resulting from fruit postharvest activity). This SW has a pH of 4.2 and the experiments were carried out at this natural pH₀ and at neutral conditions (keeping pH at 7 along the reaction). The magnetic catalyst was more active than bare TiO₂ for the treatment of imazalil in SW at natural pH. Since Fe leaching was observed (3.53 mg L^-1), added H₂O₂ enhanced both imazalil degradation and mineralization. Conveniently, these catalysts can be readily recovered by using a conventional magnetic field, as demonstrated over three consecutive recycling runs. Graphical abstract % Imazalil conversion using different magnetic catalysts and comparison with bare TiO₂.

A facile method to prepare translucent anatase thin films in monolithic structures for gas stream purification

In the present work, a facile method to prepare translucent anatase thin films on cellulose acetate monolithic (CAM) structures was developed. A simple sol-gel method was applied to synthesize photoactive TiO₂ anatase nanoparticles using tetra-n-butyl titanium as precursor. The immobilization of the photocatalyst on CAM structures was performed by a simple dip-coating method. The translucent anatase thin films allow the UV light penetration through the CAM internal walls. The photocatalytic activity was tested on the degradation of n-decane (model volatile organic compound-VOC) in gas phase, using a tubular lab-scale (irradiated by simulated solar light) and pilot-scale (irradiated by natural solar light or UVA light) reactors packed with TiO₂-CAM structures, both equipped with compound parabolic collectors (CPCs). The efficiency of the photocatalytic oxidation (PCO) process in the degradation of n-decane molecules was studied at different operating conditions at lab-scale, such as catalytic bed size (40-160 cm), TiO₂ film thickness (0.435-0.869 μm), feed flow rate (75-300 cm³ min^-1), n-decane feed concentration (44-194 ppm), humidity (3 and 40%), oxygen concentration (0 and 21%), and incident UV irradiance (18.9, 29.1, and 38.4 W_UV m^-2). The decontamination of a bioaerosol stream was also evaluated by the PCO process, using Pseudomonas aeruginosa (Gram-negative) and Staphylococcus aureus (Gram-positive) as model bacteria. A pilot-scale unit was operated day and night, using natural sunlight and artificial UV light, to show its performance in the mineralization of n-decane air streams under real outdoor conditions. Graphical abstract Normally graphics abstract are not presented with captions/legend. The diagram is a collection of images that resume the work.

Solar treatment (H2O2, TiO2-P25 and GO-TiO2 photocatalysis, photo-Fenton) of organic micropollutants, human pathogen indicators, antibiotic resistant bacteria and related genes in urban wastewater

Solar-driven advanced oxidation processes were studied in a pilot-scale photoreactor, as tertiary treatments of effluents from an urban wastewater treatment plant. Solar-H₂O₂, heterogeneous photocatalysis (with and/or without the addition of H₂O₂ and employing three different photocatalysts) and the photo-Fenton process were investigated. Chemical (sulfamethoxazole, carbamazepine, and diclofenac) and biological contaminants (faecal contamination indicators, their antibiotic resistant counterparts, 16S rRNA and antibiotic resistance genes), as well as the whole bacterial community, were characterized. Heterogeneous photocatalysis using TiO₂-P25 and assisted with H₂O₂ (P25/H₂O₂) was the most efficient process on the degradation of the chemical organic micropollutants, attaining levels below the limits of quantification in less than 4 h of treatment (corresponding to Q_UV < 40 kJ L^-1). This performance was followed by the same process without H₂O₂, using TiO₂-P25 or a composite material based on graphene oxide and TiO₂. Regarding the biological indicators, total faecal coliforms and enterococci and their antibiotic resistant (tetracycline and ciprofloxacin) counterparts were reduced to values close, or beneath, the detection limit (1 CFU 100 mL^-1) for all treatments employing H₂O₂, even upon storage of the treated wastewater for 3-days. Moreover, P25/H₂O₂ and solar-H₂O₂ were the most efficient processes in the reduction of the abundance (gene copy number per volume of wastewater) of the analysed genes. However, this reduction was transient for 16S rRNA, intI1 and sul1 genes, since after 3-days storage of the treated wastewater their abundance increased to values close to pre-treatment levels. Similar behaviour was observed for the genes qnrS (using TiO₂-P25), bla_CTX-M and bla_TEM (using TiO₂-P25 and TiO₂-P25/H₂O₂). Interestingly, higher proportions of sequence reads affiliated to the phylum Proteobacteria (Beta- and Gammaproteobacteria) were found after 3-days storage of treated wastewater than before its treatment. Members of the genera Pseudomonas, Rheinheimera and Methylotenera were among those with overgrowth.

A review on environmental monitoring of water organic pollutants identified by EU guidelines

The contamination of fresh water is a global concern. The huge impact of natural and anthropogenic organic substances that are constantly released into the environment, demands a better knowledge of the chemical status of Earth's surface water. Water quality monitoring studies have been performed targeting different substances and/or classes of substances, in different regions of the world, using different types of sampling strategies and campaigns. This review article aims to gather the available dispersed information regarding the occurrence of priority substances (PSs) and contaminants of emerging concern (CECs) that must be monitored in Europe in surface water, according to the European Union Directive 2013/39/EU and the Watch List of Decision 2015/495/EU, respectively. Other specific organic pollutants not considered in these EU documents as substances of high concern, but with reported elevated frequency of detection at high concentrations, are also discussed. The search comprised worldwide publications from 2012, considering at least one of the following criteria: 4 sampling campaigns per year, wet and dry seasons, temporal and/or spatial monitoring of surface (river, estuarine, lake and/or coastal waters) and ground waters. The highest concentrations were found for: (i) the PSs atrazine, alachlor, trifluralin, heptachlor, hexachlorocyclohexane, polycyclic aromatic hydrocarbons and di(2-ethylhexyl)phthalate; (ii) the CECs azithromycin, clarithromycin, erythromycin, diclofenac, 17α-ethinylestradiol, imidacloprid and 2-ethylhexyl 4-methoxycinnamate; and (iii) other unregulated organic compounds (caffeine, naproxen, metolachlor, estriol, dimethoate, terbuthylazine, acetaminophen, ibuprofen, trimethoprim, ciprofloxacin, ketoprofen, atenolol, Bisphenol A, metoprolol, carbofuran, malathion, sulfamethoxazole, carbamazepine and ofloxacin). Most frequent substances as well as those found at highest concentrations in different seasons and regions, together with available risk assessment data, may be useful to identify possible future PS candidates.

Activation of sodium persulfate by magnetic carbon xerogels (CX/CoFe) for the oxidation of bisphenol A: Process variables effects, matrix effects and reaction pathways

An advanced oxidation process comprising sodium persulfate (SPS) and a novel magnetic carbon xerogel was tested for the degradation of bisphenol A (BPA), a model endocrine-disrupting compound. The catalyst, consisting of interconnected carbon microspheres with embedded iron and cobalt microparticles, was capable of activating persulfate to form sulfate and hydroxyl radicals at ambient conditions. The pseudo-first order degradation rate of BPA in ultrapure water (UPW) was found to increase with (i) increasing catalyst (25-75 mg/L) and SPS (31-250 mg/L) concentrations, (ii) decreasing BPA concentration (285-14,200 μg/L), and (iii) changing pH from alkaline to acidic values (9-3). Besides UPW, tests were conducted in drinking water, treated wastewater, groundwater and surface water; interestingly, the rate in UPW was always lower than in any other matrix containing several organic and inorganic constituents. The effect of natural organic matter (in the form of humic acids) and alcohols was detrimental to BPA degradation owing to the scavenging of radicals. Conversely, chlorides at concentrations greater than 50 mg/L had a positive effect due to the formation and subsequent participation of chlorine-containing radicals. Liquid chromatography time-of-flight mass spectrometry was employed to identify major transformation by-products (TBPs) of BPA degradation in the absence and presence of chlorides; in the latter case, several chlorinated TBPs were detected confirming the role of Cl-related radicals. Based on TBPs, main reaction pathways are proposed.

An overview on exploration and environmental impact of unconventional gas sources and treatment options for produced water

Rising global energy demands associated to unbalanced allocation of water resources highlight the importance of water management solutions for the gas industry. Advanced drilling, completion and stimulation techniques for gas extraction, allow more economical access to unconventional gas reserves. This stimulated a shale gas revolution, besides tight gas and coalbed methane, also causing escalating water handling challenges in order to avoid a major impact on the environment. Hydraulic fracturing allied to horizontal drilling is gaining higher relevance in the exploration of unconventional gas reserves, but a large amount of wastewater (known as "produced water") is generated. Its variable chemical composition and flow rates, together with more severe regulations and public concern, have promoted the development of solutions for the treatment and reuse of such produced water. This work intends to provide an overview on the exploration and subsequent environmental implications of unconventional gas sources, as well as the technologies for treatment of produced water, describing the main results and drawbacks, together with some cost estimates. In particular, the growing volumes of produced water from shale gas plays are creating an interesting market opportunity for water technology and service providers. Membrane-based technologies (membrane distillation, forward osmosis, membrane bioreactors and pervaporation) and advanced oxidation processes (ozonation, Fenton, photocatalysis) are claimed to be adequate treatment solutions.

A review on the application of constructed wetlands for the removal of priority substances and contaminants of emerging concern listed in recently launched EU legislation

The presence of organic pollutants in the aquatic environment, usually found at trace concentrations (i.e., between ng L^-1 and μg L^-1 or even lower, known as micropollutants), has been highlighted in recent decades as a worldwide environmental concern due to their difficult elimination by conventional water and wastewater treatment processes. The relevant information on constructed wetlands (CWs) and their application for the removal of a specific group of pollutants, 41 organic priority substances/classes of substances (PSs) and 8 certain other substances with environmental quality standards (EQS) listed in Directive 2013/39/EU as well as 17 contaminants of emerging concern (CECs) of the Watch List of Decision 2015/495/EU, is herein reviewed. Studies were found for 24 PSs and 2 other substances with EQS: octylphenol, nonylphenol, perfluorooctane sulfonic acid, di(2-ethylhexyl)phthalate, trichloromethane, dichloromethane, 1,2-dichloroethane, pentachlorobenzene, benzene, polychlorinated dibenzo-p-dioxins, naphthalene, fluoranthene, trifluralin, alachlor, isoproturon, diuron, tributyltin compounds, simazine, atrazine, chlorpyrifos (chlorpyrifos-ethyl), chlorfenvinphos, hexachlorobenzene, pentachlorophenol, endosulfan, dichlorodiphenyltrichloroethane (or DDT) and dieldrin. A few reports were also published for 8 CECs: imidacloprid, erythromycin, clarithromycin, azithromycin, diclofenac, estrone, 17-beta-estradiol and 17-alpha-ethinylestradiol. No references were found for the other 17 PSs, 6 certain other substances with EQS and 9 CECs listed in EU legislation.

Bacteria and fungi inactivation by photocatalysis under UVA irradiation: liquid and gas phase

In the last decade, environmental risks associated with wastewater treatment plants (WWTPs) have become a concern in the scientific community due to the absence of specific legislation governing the occupational exposure limits (OEL) for microorganisms present in indoor air. Thus, it is necessary to develop techniques to effectively inactivate microorganisms present in the air of WWTPs facilities. In the present work, ultraviolet light A radiation was used as inactivation tool. The microbial population was not visibly reduced in the bioaerosol by ultraviolet light A (UVA) photolysis. The UVA photocatalytic process for the inactivation of microorganisms (bacteria and fungi, ATCC strains and isolates from indoor air samples of a WWTP) using titanium dioxide (TiO₂ P25) and zinc oxide (ZnO) was tested in both liquid-phase and airborne conditions. In the slurry conditions at liquid phase, P25 showed a better performance in inactivation. For this reason, gas-phase assays were performed in a tubular photoreactor packed with cellulose acetate monolithic structures coated with P25. The survival rate of microorganisms under study decreased with the catalyst load and the UVA exposure time. Inactivation of fungi was slower than resistant bacteria, followed by Gram-positive bacteria and Gram-negative bacteria. Graphical abstract Inactivation of fungi and bacteria in gas phase by photocatalitic process performed in a tubular photoreactor packed with cellulose acetate monolith structures coated with TiO₂.

Ozonation and UV254nm radiation for the removal of microorganisms and antibiotic resistance genes from urban wastewater

Conventional wastewater treatment has a limited capacity to reduce antibiotic resistant bacteria and genes (ARB&ARG). Tertiary treatment processes are promising solutions, although the transitory inactivation of bacteria may select ARB&ARG. This study aimed at assessing the potential of ozonation and UV_254nm radiation to inactivate cultivable fungal and bacterial populations, and the selected genes 16S rRNA (common to all bacteria), intI1 (common in Gram-negative bacteria) and the ARG vanA, bla_TEM, sul1 and qnrS. The abundance of the different microbiological parameters per volume of wastewater was reduced by ∼2 log units for cultivable fungi and 16S rRNA and intI1 genes, by∼3-4 log units, for total heterotrophs, enterobacteria and enterococci, and to values close or below the limits of quantification for ARG, for both processes, after a contact time of 30min. Yet, most of the cultivable populations, the 16S rRNA and intI1 genes as well as the ARG, except qnrS after ozonation, reached pre-treatment levels after 3days storage, suggesting a transitory rather than permanent microbial inactivation. Noticeably, normalization per 16S rRNA gene evidenced an increase of the ARG and intI1 prevalence, mainly after UV_254nm treatment. The results suggest that these tertiary treatments may be selecting for ARB&ARG populations.