Oxidation of Alcohols with Molecular Oxygen on Solid Catalysts

Photocatalyst-free light driven dehydrogenation of alcohols into carbonyl compounds under mild conditions

Herein, we reported a photocatalyst-free, facile and eco-friendly method for conducting dehydrogenation of alcohols to corresponding aldehydes or ketones with high selectivity under mild conditions. The methodology exhibited outstanding tolerance with electron-donating and electron-withdrawing groups and afforded series of aldehydes or ketones in considerable yields. Furthermore, the plausible mechanism was investigated by control experiments and DFT calculations. The advantages of readily accessible, atomic economy and green reaction conditions for the present method will endow it with prospective application in chemical synthesis.

Bismuth oxyhalide quantum dots modified sodium titanate necklaces with exceptional population of oxygen vacancies and photocatalytic activity

We here demonstrate the controlled synthesis of BiOBr quantum dots (QDs) decorated Na₂Ti₃O₇ necklaces via a hydrothermal transformation of sodium titanate nanotubes. The BiOBr QDs are deposited on the surface of Na₂Ti₃O₇ necklaces, forming a heterogeneous interface of BiOBr(200) and Na₂Ti₃O₇(110), which promotes the separation efficiency of photogenerated charges, thus resulting in its superior catalytic performance in the photo-oxidation of benzyl alcohol. The BiOBr/Na₂Ti₃O₇-1.0 exhibiting highest oxygen defect population gives best photocatalytic activity with a promising conversion rate of 3.32 mmol_{reacted BA} g_catal.^-1h^-1, which is substantially higher than the corresponding reported photocatalysts. DFT results corroborate the superior performance of BiOBr/Na₂Ti₃O₇ is mainly due to the formation of a built-in electric field and given efficiently the charge transfer between BiOBr(200) and Na₂Ti₃O₇(110). In all, this study reports a simple in-situ hydrothermal growth protocol to efficiently construct BiOBr/Na₂Ti₃O₇ heterojunction composites and offers guidelines for design of a new synthetic strategy to prepare efficient photocatalysts.

Low-temperature liquid platinum catalyst

Insights into metal-matrix interactions in atomically dispersed catalytic systems are necessary to exploit the true catalytic activity of isolated metal atoms. Distinct from catalytic atoms spatially separated but immobile in a solid matrix, here we demonstrate that a trace amount of platinum naturally dissolved in liquid gallium can drive a range of catalytic reactions with enhanced kinetics at low temperature (318 to 343 K). Molecular simulations provide evidence that the platinum atoms remain in a liquid state in the gallium matrix without atomic segregation and activate the surrounding gallium atoms for catalysis. When used for electrochemical methanol oxidation, the surface platinum atoms in the gallium-platinum system exhibit an activity of [Formula: see text] three orders of magnitude higher than existing solid platinum catalysts. Such a liquid catalyst system, with a dynamic interface, sets a foundation for future exploration of high-throughput catalysis.

Oxygen-Enhanced Chemical Stability of Lithium-Mediated Electrochemical Ammonia Synthesis

Although oxygen added to nonaqueous lithium-mediated electrochemical ammonia synthesis (LiMEAS) enhances Faradaic efficiency, its effect on chemical stability and byproducts requires understanding. Therefore, standardized high-resolution gas chromatography-mass spectrometry and nuclear magnetic resonance were employed. Different volatile degradation products have been qualitatively analyzed and quantified in tetrahydrofuran electrolyte by adding some oxygen to LiMEAS. Electrodeposited lithium and reduction/oxidation of the solvent on the electrodes produced organic byproducts to different extents, depending on the oxygen concentration, and resulted in less decomposition products after LiMEAS with oxygen. The main organic component in solid-electrolyte interphase was polytetrahydrofuran, which disappeared by adding an excess of oxygen (3 mol %) to LiMEAS. The total number of byproducts detected was 14, 9, and 8 with oxygen concentrations of 0, 0.8, and 3 mol %, respectively. The Faradaic efficiency and chemical stability of the LiMEAS have been greatly improved with addition of optimal 0.8 mol % oxygen at 20 bar total pressure.

Evolution of surface and sub-surface morphology and chemical state of exsolved Ni nanoparticles

Nanoparticle formation by dopant exsolution (migration) from bulk host lattices is a promising approach to generate highly stable nanoparticles with tunable size, shape, and distribution. We investigated Ni dopant migration from strontium titanate (STO) lattices, forming metallic Ni nanoparticles at STO surfaces. Ex situ scanning probe measurements confirmed the presence of nanoparticles at the H₂ treated surface. In situ ambient pressure X-ray photoelectron spectroscopy (AP-XPS) revealed reduction from Ni²⁺ to Ni⁰ as Ni dopants migrated to the surface during heating treatments in H₂. During Ni migration and reduction, the Sr and Ti chemical states were mostly unchanged, indicating the selective reduction of Ni during treatment. At the same time, we used in situ ambient pressure grazing incidence X-ray scattering (GIXS) to monitor the particle morphology. As Ni migrated to the surface, it nucleated and grew into compressed spheroidal nanoparticles partially embedded in the STO perovskite surface. These findings provide a detailed picture of the evolution of the nanoparticle surface and subsurface chemical state and morphology as the nanoparticles grow beyond the initial nucleation and growth stages.

Reinvestigating FeBr3-Catalyzed Alcohol Oxidation with H2O2: Is a High-Valent Iron Species (HIS) or a Reactive Brominating Species (RBS) Responsible for Alcohol Oxidation?

In 2003, Martı́n et al. reported a green alcohol oxidation with FeBr₃(cat.)/H₂O₂ and proposed a high-valent iron species (HIS) responsible for the alcohol oxidation. Reinvestigating this FeBr₃(cat.)/H₂O₂ method led us to propose a different mechanism that involves a reactive brominating species (RBS) for the oxidation of alcohols. The evidence to support this RBS-based mechanism includes (1) our recent findings of in situ-generated RBS from the related FeBr₂/H₂O₂ or CeBr₃/H₂O₂ systems, (2) our results of a series of controlled experiments, and (3) some related RBS-based precedents (NBS, NBA, or Br₂) showing similar high oxidation selectivity of secondary over primary alcohols. These studies enable us to discover that a RBS from CeBr₃/H₂O₂ is much more efficient for the oxidation of secondary and benzylic alcohols, which represents a new green protocol for selective oxidation of alcohols to carbonyls.

Gold nanobipyramids doped with Au/Pd alloyed nanoclusters for high efficiency ethanol electrooxidation

Plasmonic metal nanostructures are of great interest due to their excellent physicochemical properties and promising applications in a wide range of technical fields. Among metal nanostructures, bimetallic nanostructures with desired morphologies, such as core-shell, uniform alloy and surface decoration, are of great interest due to their improved properties and superior synergetic effects. In this paper, Au/Pd nanoclusters were deposited on the surface of gold nanobipyramids (AuBPs) into a core-shell nanostructure (AuBP@Au x Pd1-x ) through a reductive co-precipitation method. The AuBP@Au x Pd1-x nanostructure integrates effectively the advantages of plasmonic AuBPs and catalytic Pd ultrafine nanoclusters, as well as the stable Au/Pd alloy shell. The AuBP@Au x Pd1-x nanostructure exhibits superior electrocatalytic activity and durability for oxygen reduction in alkaline media owing to the synergistic effect between the AuBP core and Au/Pd shell. Furthermore, the shell thickness of AuBP@Au x Pd1-x nanostructures can be adjusted by varying the amount of precursor. Overall, the catalytic activity of bimetallic Au/Pd catalysts is likely to be governed by a complex interplay of contributions from the particle size and shape.

Photocatalytic Anaerobic Oxidation of Aromatic Alcohols Coupled With H2 Production Over CsPbBr3/GO-Pt Catalysts

Metal halide perovskites (MHPs) have been widely investigated for various photocatalytic applications. However, the dual-functional reaction system integrated selective organic oxidation with H₂ production over MHPs is rarely reported. Here, we demonstrate for the first time the selective oxidation of aromatic alcohols to aldehydes integrated with hydrogen (H₂) evolution over Pt-decorated CsPbBr₃. Especially, the functionalization of CsPbBr₃ with graphene oxide (GO) further improves the photoactivity of the perovskite catalyst. The optimal amount of CsPbBr₃/GO-Pt exhibits an H₂ evolution rate of 1,060 μmol g⁻¹ h⁻¹ along with high selectivity (>99%) for benzyl aldehyde generation (1,050 μmol g⁻¹ h⁻¹) under visible light (λ > 400 nm), which is about five times higher than the CsPbBr₃-Pt sample. The enhanced activity has been ascribed to two effects induced by the introduction of GO: 1) GO displays a structure-directing role, decreasing the particle size of CsPbBr₃ and 2) GO and Pt act as electron reservoirs, extracting the photogenerated electrons and prohibiting the recombination of the electron–hole pairs. This study opens new avenues to utilize metal halide perovskites as dual-functional photocatalysts to perform selective organic transformations and solar fuel production.

Catalytic Activity Enhancement on Alcohol Dehydrogenation via Directing Reaction Pathways from Single- to Double-Atom Catalysis

To further improve the intrinsic reactivity of single-atom catalysts (SACs), the controllable modification of a single site by coordinating with a second neighboring metal atom, developing double-atom catalysts (DACs), affords new opportunities. Here we report a catalyst that features two bonded Fe-Co double atoms, which is well represented by an FeCoN₆(OH) ensemble with 100% metal dispersion, that work together to switch the reaction mechanism in alcohol dehydrogenation under oxidant-free conditions. Compared with Fe-SAC and Co-SAC, FeCo-DAC displays higher activity performance, yielding the desired products in up to 98% yields. Moreover, a broad diversity of benzyl alcohols and aliphatic alcohols convert into the corresponding dehydrogenated products with excellent yields and high selectivity. The kinetic reaction results show that lower activation energy is obtained by FeCo-DAC than that by Fe-SAC and Co-SAC. Moreover, computational studies demonstrate that the reaction path by DACs is different from that by SACs, providing a rationale for the observed enhancements.

Au-Pd separation enhances bimetallic catalysis of alcohol oxidation

In oxidation reactions catalysed by supported metal nanoparticles with oxygen as the terminal oxidant, the rate of the oxygen reduction can be a limiting factor. This is exemplified by the oxidative dehydrogenation of alcohols, an important class of reactions with modern commercial applications^1-3. Supported gold nanoparticles are highly active for the dehydrogenation of the alcohol to an aldehyde⁴ but are less effective for oxygen reduction^5,6. By contrast, supported palladium nanoparticles offer high efficacy for oxygen reduction^5,6. This imbalance can be overcome by alloying gold with palladium, which gives enhanced activity to both reactions^7,8,9; however, the electrochemical potential of the alloy is a compromise between that of the two metals, meaning that although the oxygen reduction can be improved in the alloy, the dehydrogenation activity is often limited. Here we show that by separating the gold and palladium components in bimetallic carbon-supported catalysts, we can almost double the reaction rate compared with that achieved with the corresponding alloy catalyst. We demonstrate this using physical mixtures of carbon-supported monometallic gold and palladium catalysts and a bimetallic catalyst comprising separated gold and palladium regions. Furthermore, we demonstrate electrochemically that this enhancement is attributable to the coupling of separate redox processes occurring at isolated gold and palladium sites. The discovery of this catalytic effect-a cooperative redox enhancement-offers an approach to the design of multicomponent heterogeneous catalysts.

A Critical Review on the Economically Feasible and Sustainable Poly(3-Hydroxybutyrate-co-3-hydroxyvalerate) Production from Alkyl Alcohols

Poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (P(3HB-co-3HV)) is the most studied short-chain-length polyhydroxyalkanoates (PHA) with high application importance in various fields. The domination of high-cost propionate and valerate over other 3-hydroxyvalerate (3HV) precursors owing to their wide preference among PHA-producing bacteria has hindered the development of diverse production processes. As alkyl alcohols are mainly produced from inexpensive starting materials through oxo synthesis, they contribute a cost-effective advantage over propionate and valerate. Moreover, alkyl alcohols can be biosynthesized from natural substrates and organic wastes. Despite their great potential, their toxicity to most PHA-producing bacteria has been the major drawback for their wide implementation as 3HV precursors for decades. Although the standard PHA-producing bacteria Cupriavidus necator showed promising alcohol tolerance, the 3HV yield was discouraging. Continuous discovery of alkyl alcohols-utilizing PHA-producing bacteria has enabled broader choices in 3HV precursor selection for diverse P(3HB-co-3HV) production processes with higher economic feasibility. Besides continuous effort in searching for promising wild-type strains, genetic engineering to construct promising recombinant strains based on the understanding of the mechanisms involved in alkyl alcohols toxicity and tolerance is an alternative approach. However, more studies are required for techno-economic assessment to analyze the economic performance of alkyl alcohol-based production compared to that of organic acids.

Tunable Production of (R)- or (S)-Citronellal from Geraniol via a Bienzymatic Cascade Using a Copper Radical Alcohol Oxidase and Old Yellow Enzyme

Biocatalytic pathways for the synthesis of (-)-menthol, the most sold flavor worldwide, are highly sought-after. To access the key intermediate (R)-citronellal used in current major industrial production routes, we established a one-pot bienzymatic cascade from inexpensive geraniol, overcoming the problematic biocatalytic reduction of the mixture of (E/Z)-isomers in citral by harnessing a copper radical oxidase (CgrAlcOx) and an old yellow enzyme (OYE). The cascade using OYE2 delivered 95.1% conversion to (R)-citronellal with 95.9% ee, a 62 mg scale-up affording high yield and similar optical purity. An alternative OYE, GluER, gave (S)-citronellal from geraniol with 95.3% conversion and 99.2% ee.

Chemical and Electrochemical O2 Reduction on Earth-Abundant M-N-C Catalysts and Implications for Mediated Electrolysis

M-N-C catalysts, incorporating non-precious-metal ions (e.g. M = Fe, Co) within a nitrogen-doped carbon support, have been the focus of broad interest for electrochemical O₂ reduction and aerobic oxidation reactions. The present study explores the mechanistic relationship between the O₂ reduction mechanism under electrochemical and chemical conditions. Chemical O₂ reduction is investigated via the aerobic oxidation of a hydroquinone, in which the O-H bonds supply the protons and electrons needed for O₂ reduction to water. Mechanistic studies have been conducted to elucidate whether the M-N-C catalyst couples two independent half-reactions (IHR), similar to electrode-mediated processes, or mediates a direct inner-sphere reaction (ISR) between O₂ and the organic molecule. Kinetic data support the latter ISR pathway. This conclusion is reinforced by rate/potential correlations that reveal significantly different Tafel slopes, implicating different mechanisms for chemical and electrochemical O₂ reduction.

Highly efficient catalytic oxidation of 5-hydroxymethylfurfural to 2,5-furandicarboxylic acid using bimetallic Pt-Cu alloy nanoparticles as catalysts

Bimetallic platinum-copper alloy nanoparticles are highly active catalysts for the oxidation of 5-hydroxymethylfurfural (HMF) to 2,5-furandicarboxylic acid (FDCA) under base-free conditions, with a high turnover frequency of up to 135 h^-1 in aqueous solution. The Pt-Cu_1.5/AC alloyed catalyst promoted the rate-determining step in the tandem oxidation compared with the monometallic Pt/AC catalyst, thus improving the catalytic performance.

Facile synthesis of a nano titanium catalyst and its performance in selective oxidation of aromatic and pyridinic alcohols under visible light

The oxidation of alcohols to the corresponding carbonyl compounds is of great significance in chemical synthesis and fine chemical production.

β-MnO2 nanoparticles as heterogenous catalysts for aerobic oxidative transformation of alcohols to carbonyl compounds, nitriles, and amides

β-MnO2 nanoparticles exhibit high catalytic performance for the aerobic oxidation of various aromatic, allylic, and heteroaromatic alcohols and one-pot tandem oxidation of alcohols to nitriles and amides in the presence of NH3.

Dioxiranes: A Half-Century Journey

Dioxiranes are multi-tasking reagents inheriting mild and selective oxygen transfer attributes. These oxidants are accessed from the reaction of ketones with an oxidant and are employed stoichiometrically or catalytically (in...

An efficient and recyclable Cu@UiO-67-BPY catalyst for the selective oxidation of alcohols and the epoxidation of olefins

A novel CuCl2-UiO-67-BPY catalyst was synthesized for catalytic oxidation with up to 99% yield and 99% selectivity.

Selectivity in trace gas sensing: recent developments, challenges, and future perspectives

Selectivity is one of the most crucial figures of merit in trace gas sensing, and thus a comprehensive assessment is necessary to have a clear picture of sensitivity, selectivity, and their interrelations in terms of quantitative and qualitative views.

Oxidation of Monoethylene Glycol to Glycolic Acid with Gold-Based Catalyst and Glycolic Acid Isolation by Electrodialysis

In this work, a highly selective and active gold-based catalyst for the oxidation of high concentrated monoethylene glycol (MEG) in aqueous solution (3 M, 20 wt%) is described. High glycolic acid (GA) selectivity was achieved under mild reaction conditions. The optimization of the catalyst composition and of the reaction conditions for the oxidation of MEG in semi-batch mode under alkaline conditions led to a GA yield of >80% with a GA selectivity of about 90% in short reaction time. The bimetallic catalyst 0.1 wt% AuPt (9:1)/CeO2 showed very high activity (>2000 mmolMEG/gmetalmin) in the oxidation of MEG and, contrary to other studies, an extremely high educt to metal mole ratio of >25,000 was used. Additionally, the gold–platinum catalyst showed a high GA selectivity over more than 10 runs. A very efficient and highly selective process for the GA production from MEG under industrial relevant reaction conditions was established. In order to obtain a GA solution with high purity for the subsequent polymerization, the received reaction solution containing sodium glycolate, unreacted MEG and sodium oxalate is purified by a novel down-stream process via electrodialysis. The overall GA yield of the process exceeds 90% as unreacted MEG can be recycled.

Triple-phase Boundary in Anion-Exchange Membrane Reactor Enables Selective Electrosynthesis of Aldehyde from Primary Alcohol

Oxidation of primary alcohol to the corresponding aldehyde remains a significant challenge, even with the state-of-the-art chemistry. Here, a novel electrochemical system was developed for the exclusive production of aldehyde from primary alcohol using an anion-exchange membrane (AEM) reactor. Oxidation proceeded on a gold catalyst under basic conditions, which largely enhanced the reaction rate. Despite the basic nature around the reaction sites, the oxidation of primary alcohols exclusively yielded the corresponding aldehyde, which was attributed to the unique three-phase interfacial reaction sites in the AEM reactor. In addition to benzyl alcohol, the oxidation of allylic and aliphatic alcohols was also demonstrated. Comparison of constant potential electrolysis with the AEM reactor or a conventional batch-type cell revealed the crucial role of the triple-phase boundary for the selectivity of the oxidation of alcohol.

A Perspective on Heterogeneous Catalysts for the Selective Oxidation of Alcohols

Selective oxidation of higher alcohols using heterogeneous catalysts is an important reaction in the synthesis of fine chemicals with added value. Though the process for primary alcohol oxidation is industrially established, there is still a lack of fundamental understanding considering the complexity of the catalysts and their dynamics under reaction conditions, especially when higher alcohols and liquid-phase reaction media are involved. Additionally, new materials should be developed offering higher activity, selectivity, and stability. This can be achieved by unraveling the structure-performance correlations of these catalysts under reaction conditions. In this regard, researchers are encouraged to develop more advanced characterization techniques to address the complex interplay between the solid surface, the dissolved reactants, and the solvent. In this mini-review, we report some of the most important approaches taken in the field and give a perspective on how to tackle the complex challenges for different approaches in alcohol oxidation while providing insight into the remaining challenges.