Fluorescent dyes and their supramolecular host/guest complexes with macrocycles in aqueous solution

Metal-Assisted Complexation of Fluorogenic Dyes by Cucurbit[7]uril and Cucurbit[8]uril: A DFT Evaluation of the Key Factors Governing the Host-Guest Recognition

With the emergence of host-guest systems, a novel branch of complexation chemistry has found wide application in industries such as food, pharmacy, medicine, environmental protection and cosmetics. Along with the extensively studied cyclodextrins and calixarenes, the innovative cucurbiturils (CB) have enjoyed increased popularity among the scientific community as they possess even better qualities as cavitands as compared to the former molecules. Moreover, their complexation abilities could further be enhanced with the assistance of metal cations, which can interestingly exert a dual effect on the complexation process: either by competitively binding to the host entity or cooperatively associating with the CB@guest structures. In our previous work, two metal species (Mg²⁺ and Ga³⁺) have been found to bind to CB molecules in the strongest fashion upon the formation of host-guest complexes. The current study focuses on their role in the complex formation with three dye molecules: thiazole orange, neutral red, and thioflavin T. Various key factors influencing the process have been recognized, such as pH and the dielectric constant of the medium, the cavity size of the host, Mⁿ⁺ charge, and the presence/absence of hydration shell around the metal cation. A well-calibrated DFT methodology, solidly based and validated and presented in the literature experimental data, is applied. The obtained results shed new light on several aspects of the cucurbituril complexation chemistry.

Molecular-level enhanced clusterization-triggered emission of nonconventional luminophores in dilute aqueous solution

Nonconjugated and nonaromatic luminophores based on clustering-triggered emission derived from through-space conjugation have drawn emerging attention in recent years. The reported nonconventional luminophores are emissive in concentrated solution and/or in the solid state, but they tend to be nonluminescent in dilute solution, which greatly limits their sensing and imaging applications. Herein, we design unique clusteroluminogens through modification of cyclodextrin (CD) with amino acids to enable the intermolecular and intramolecular clusterization of chromophores in CD-based confined space. The resulted through-space interactions along with conformation rigidification originated from hydrogen bond interaction and complexation interaction generate blue to cyan fluorescence even in the dilute solution (0.035 wt.%, quantum yield of 40.70%). Moreover, the prepared histidine-modified CD (CDHis) is demonstrated for fluorescent detection of chlortetracycline with high sensitivity and selectivity. This work provides a new and universal strategy to synthesize nonconventional luminophores with bright fluorescence in dilute aqueous solution through molecular-level enhanced clusterization-triggered emission.

Cucurbit[n]uril-based fluorescent indicator-displacement assays for sensing organic compounds

The widespread conversion of synthetic receptors into luminescent sensors has been achieved via the use of fluorescent-indicator displacement assays (F-IDAs). Due to their rigid structures and efficient binding affinities, cucurbit[n]urils, combined with a variety of fluorescent guests, have gained extensive utilization in fluorescent-indicator displacement assays for sensing non-fluorescent or weakly fluorescent organic compounds (analytes) in a selective and specific manner. This mini-review summarizes recent advances in the design of cucurbit[n]uril-based fluorescent-indicator displacement assays and discusses the current challenges and future prospects in this area.

Stability and pKa Modulation of Aminophenoxazinones and Their Disulfide Mimics by Host-Guest Interaction with Cucurbit[7]uril. Direct Applications in Agrochemical Wheat Models

Aqueous solubility and stability often limit the application of aminophenoxazinones and their sulfur mimics as promising agrochemicals in a sustainable agriculture inspired by allelopathy. This paper presents a solution to the problem using host-guest complexation with cucurbiturils (CBn). Computational studies show that CB7 is the most suitably sized homologue due to its strong affinity for guest molecules and its high water solubility. Complex formation has been studied by direct titrations monitored using UV-vis spectroscopy, finding a preferential interaction with protonated aminophenoxazinone species with high binding affinities (CB7·APOH⁺, K_a = (1.85 ± 0.37) × 10⁶ M^-1; CB7·DiS-NH₃⁺, K_a = (3.91 ± 0.53) × 10⁴ M^-1; and DiS-(NH₃⁺)₂, K_a= (1.27 ± 0.42) × 10⁵ M^-1). NMR characterization and stability analysis were also performed and revealed an interesting pK_a modulation and stabilization by cucurbiturils (2-amino-3H-phenoxazin-3-one (APO), pK_a = 2.94 ± 0.30, and CB7·APO, pK_a = 4.12 ± 0.15; 2,2'-disulfanediyldianiline (DiS-NH₂), pK_a = 2.14 ± 0.09, and CB7·DiS-NH₂, pK_a = 3.26 ± 0.09), thus favoring applications in different kinds of crop soils. Kinetic studies have demonstrated the stability of the CB7·APO complex at different pH media for more than 90 min. An in vitro bioassay with etiolated wheat coleoptiles showed that the bioactivity of APO and DiS-NH₂ is enhanced upon complexation.

A Fluorescein-Substituted Perbrominated Dodecaborate Cluster as an Anchor Dye for Large Macrocyclic Hosts and Its Application in Indicator Displacement Assays

Perhalogenated boron clusters derived from B₁₂Br₁₂^2-, a superchaotropic dianion with a globular icosahedral shape, serve as inorganic cavity binders for cyclodextrins (CDs), in particular for large CDs (γ-CD and δ-CD), with high binding affinity (K_a > 10⁶ M^-1) in aqueous solution. This opens the door for applications of this anchoring moiety by linking it to organic residues, prominently fluorescent dyes. We report here the synthesis of a novel fluorescein-substituted perbrominated dodecaborate cluster by a copper(I)-catalyzed azide-alkyne click reaction. The formation of host-guest inclusion complexes between the dodecaborate-modified fluorescein dye and CDs can be readily followed by optical titrations, which afforded a binding constant of ∼1 × 10⁴ M^-1 with γ-CD; that is, the cluster functionalization allows binding of an otherwise nonbinding dye to the macrocycle ("anchor dye"). The formation of the 1:1 host-guest inclusion complex between the dye and γ-CD occurs over a broad range of pH values, which allows its application as a sensitive reporter pair according to the indicator displacement method, e.g., for drug detection. In addition, the substituted dye shows outer-wall binding to cucurbiturils through the dodecaborate moiety, leading to the formation of aggregates and significant fluorescence quenching of the dye.

Multiple Effects of an Anionic Cyclodextrin Macrocycle on the Reversible Isomerization of a Photoactive Guest Dye

Understanding and controlling the reversible isomerization of photoactive molecules in order to obtain a tunable optical response is desirable for many photofunctional applications. This study describes the interesting effects of an anionic cyclodextrin host (sulfated-βCD, SCD) on the photoisomerization and protonation equilibrium of an important hemicyanine dye (trans-4-[4-(dimethylamino)styryl]-1-methylpyridinium iodide, DSP). The SCD host assists in unlocking the photoisomerization potential of DSP by promoting protonation of the dye. It also assists in stabilizing the cis isomer of the protonated dye, thereby significantly delaying the reverse cis to trans isomerization of DSPH⁺. Furthermore, the interplay of both hydrophobic and electrostatic interactions in the complex formation of SCD with DSPH⁺ makes the reverse cis to trans isomerization of DSPH⁺ amenable to influence by the added salt. The stimuli-responsive reversible isomerization of SCD-DSPH⁺ is an interesting case from the perspective of chemical sensing or light operated functional materials with host-guest systems.

Dephasing Processes in the Molecular Dye Lumogen-F Orange Characterized by Two-Dimensional Electronic Spectroscopy

Molecular dyes are finding more and more applications in photonics and quantum technologies, such as polaritonic optical microcavities, organic quantum batteries and single-photon emitters for quantum sensing and metrology. For all these applications, it is of crucial importance to characterize the dephasing mechanisms. In this work we use two-dimensional electronic spectroscopy (2DES) to study the temperature dependent dephasing processes in the prototypical organic dye Lumogen-F orange. We model the 2DES maps using the Bloch equations for a two-level system and obtain a dephasing time T₂ = 53 fs at room temperature, which increases to T₂ = 94 fs at 86 K. Furthermore, spectral diffusion processes are observed and modeled by a combination of underdamped and overdamped Brownian oscillators. Our results provide useful design parameters for advanced optoelectronic and photonic devices incorporating dye molecules.

Recent Development in Sensitizers for Lanthanide-Doped Upconversion Luminescence

The attractive features of lanthanide-doped upconversion luminescence (UCL), such as high photostability, nonphotobleaching or photoblinking, and large anti-Stokes shift, have shown great potentials in life science, information technology, and energy materials. Therefore, UCL modulation is highly demanded toward expected emission wavelength, lifetime, and relative intensity in order to satisfy stringent requirements raised from a wide variety of areas. Unfortunately, the majority of efforts have been devoted to either simple codoping of multiple activators or variation of hosts, while very little attention has been paid to the critical role that sensitizers have been playing. In fact, different sensitizers possess different excitation wavelengths and different energy transfer pathways (to different activators), which will lead to different UCL features. Thus, rational design of sensitizers shall provide extra opportunities for UCL tuning, particularly from the excitation side. In this review, we specifically focus on advances in sensitizers, including the current status, working mechanisms, design principles, as well as future challenges and endeavor directions.

Insights into Two Novel Orthopalladated Chromophores with Antimicrobial Activity against Escherichia coli

Advanced chromophoric tools, besides being biologically active, need to meet the expectations of the technological demands including stability, colour retention, and proper solubility for their target. Many coordination compounds of conjugated ligands are antibacterial dyes, able to combine a strong dyeing performance with a useful biological activity. Specifically, palladium (II) complexes of Schiff base ligands are known for their relevant activity against common bacteria. In this article, we report the synthesis and comprehensive experimental and theoretical characterization of two novel Pd(II) chromophore complexes obtained from a cyclopalladated Schiff base as two different chelating azo dyes. The antibacterial response of these two novel complexes was tested against the ubiquitous Escherichia coli bacterium in an aqueous medium and revealed a noteworthy antimicrobial activity, higher than when compared with their uncoordinated biologically active ligands.

Morpholine-Functionalized Multicomponent Metallacage as a Vector for Lysosome-Targeted Cell Imaging

Metallacages with suitable cavities and specific functions are promising delivery vectors in biological systems. Herein, we report a morpholine-functionalized metallacage for lysosome-targeted cell imaging. The efficient host-guest interactions between the metallacage and dyes prevent them from aggregation, so their emission in aqueous solutions is well maintained. The fluorescence quantum yield of these host-guest complexes reaches 74.40%. Therefore, the metallacage is further employed as a vector to deliver dyes with different emission colors (blue, green, and red) into lysosomes for targeted imaging. This research affords a type of vector for the delivery of various cargos toward biological applications, which will enrich the usage of metallacages in biomedical engineering.

Proton‐Gradient‐Driven Sensitivity Enhancement of Liposome‐Encapsulated Supramolecular Chemosensors

An overarching challenge in the development of supramolecular sensor systems is to enhance their sensitivity, which commonly involves the synthesis of refined receptors with increased affinity to the analyte. We show that a dramatic sensitivity increase by 1–2 orders of magnitude can be achieved by encapsulating supramolecular chemosensors inside liposomes and exposing them to a pH gradient across the lipid bilayer membrane. This causes an imbalance of the influx and efflux rates of basic and acidic analytes leading to a significantly increased concentration of the analyte in the liposome interior. The utility of our liposome‐enhanced sensors was demonstrated with various host–dye reporter pairs and sensing mechanisms, and we could easily increase the sensitivity towards multiple biologically relevant analytes, including the neurotransmitters serotonin and tryptamine.

Cucurbit[7]uril Complexation of Near-Infrared Fluorescent Azobenzene-Cyanine Conjugates

Two new azobenzene heptamethine cyanine conjugates exist as dispersed monomeric molecules in methanol solution and exhibit near-infrared (NIR) cyanine absorption and fluorescence. Both conjugates form non-emissive cyanine H-aggregates in water, but the addition of cucurbit[7]uril (CB7) induces dye deaggregation and a large increase in cyanine NIR fluorescence emission intensity. CB7 encapsulates the protonated azonium tautomer of the 4-(N,N-dimethylamino)azobenzene component of each azobenzene-cyanine conjugate and produces a distinctive new absorption band at 534 nm. The complex is quite hydrophilic, which suggests that CB7 can be used as a supramolecular additive to solubilize this new family of NIR azobenzene-cyanine conjugates for future biomedical applications. Since many azobenzene compounds are themselves potential drug candidates or theranostic agents, it should be possible to formulate many of them as CB7 inclusion complexes with improved solubility, stability, and pharmaceutical profile.

Molecular Engineering of Noncovalent Dimerization

Dimers are probably the simplest model to facilitate the understanding of fundamental physical and chemical processes that take place in much-expanded systems like aggregates, crystals, and other solid states. The molecular interplay within a dimer differentiates it from the corresponding monomeric state and determines its features. Molecular engineering of noncovalent dimerization through applied supramolecular restrictions enables additional control over molecular interplay, particularly over its dynamic aspect. This Perspective introduces the recent effort that has been made in the molecular engineering of noncovalent dimerization, including supramolecular dimers, folda-dimers, and macrocyclic dimers. It showcases how the variation in supramolecular restrictions endows molecular-based materials with improved performance and/or functions like enhanced emission, room-temperature phosphorescence, and effective catalysis. We particularly discuss pseudostatic dimers that can sustain molecular interplay for a long period of time, yet are still flexible enough to adapt to variations. The pseudostatic feature allows for active species to decay along an alternate pathway, thereby spinning off emerging features that are not readily accessible from conventional dynamic systems.

Cucurbit[7]uril Macrocyclic Sensors for Optical Fingerprinting: Predicting Protein Structural Changes to Identifying Disease-Specific Amyloid Assemblies

In a three-dimensional (3D) representation, each protein molecule displays a specific pattern of chemical and topological features, which are altered during its misfolding and aggregation pathway. Generating a recognizable fingerprint from such features could provide an enticing approach not only to identify these biomolecules but also to gain clues regarding their folding state and the occurrence of pathologically lethal misfolded aggregates. We report here a universal strategy to generate a fluorescent fingerprint from biomolecules by employing the pan-selective molecular recognition feature of a cucurbit[7]uril (CB[7]) macrocyclic receptor. We implemented a direct sensing strategy by covalently tethering CB[7] with a library of fluorescent reporters. When CB[7] recognizes the chemical and geometrical features of a biomolecule, it brings the tethered fluorophore into the vicinity, concomitantly reporting the nature of its binding microenvironment through a change in their optical signature. The photophysical properties of the fluorophores allow a multitude of probing modes, while their structural features provide additional binding diversity, generating a distinct fluorescence fingerprint from the biomolecule. We first used this strategy to rapidly discriminate a diverse range of protein analytes. The macrocyclic sensor was then applied to probe conformational changes in the protein structure and identify the formation of oligomeric and fibrillar species from misfolded proteins. Notably, the sensor system allowed us to differentiate between different self-assembled forms of the disease-specific amyloid-β (Aβ) aggregates and segregated them from other generic amyloid structures with a 100% identification accuracy. Ultimately, this sensor system predicted clinically relevant changes by fingerprinting serum samples from a cohort of pregnant women.

A Bioinspired Light Harvesting System in Aqueous Medium: Highly Efficient Energy Transfer through the Self Assembly of β-Sheet Nanostructures of Poly-d-Lysine

Nature has beautifully assembled its light harvesting pigments within protein scaffolds, which ensures a very high energy transfer. Designing a highly efficient artificial bioinspired light harvesting system (LHS) thus requires the nanoscale spatial orientation and electronic control of the associated chromophores. Although DNA has been used as a scaffold to organize chromophores, proteins or polypeptides, however, are very rarely explored. Here, we have developed a highly efficient, artificial, bioinspired LHS using polypeptide (poly-d-lysine, PDL) nanostructures making use of their β-sheet structure in an aqueous alkaline medium. The chromophores used herein are compatible for an energy transfer process and are nonfluorescent in an aqueous medium but exhibit high fluorescence intensity when bound to the nanostructure of PDL. The close proximity of the chromophores results in an energy transfer efficiency of ∼92% besides generating white light emission at a particular molar ratio between the chromophores.

Supramolecular Complex of Photochromic Diarylethene and Cucurbit[7]uril: Fluorescent Photoswitching System for Biolabeling and Imaging

Photoswitchable fluorophores—proteins and synthetic dyes—whose emission is reversibly switched on and off upon illumination, are powerful probes for bioimaging, protein tracking, and super-resolution microscopy. Compared to proteins, synthetic dyes are smaller and brighter, but their photostability and the number of achievable switching cycles in aqueous solutions are lower. Inspired by the robust photoswitching system of natural proteins, we designed a supramolecular system based on a fluorescent diarylethene (DAE) and cucurbit[7]uril (CB7) (denoted as DAE@CB7). In this assembly, the photoswitchable DAE molecule is encapsulated by CB7 according to the host–guest principle, so that DAE is protected from the environment and its fluorescence brightness and fatigue resistance in pure water improved. The fluorescence quantum yield (Φ_fl) increased from 0.40 to 0.63 upon CB7 complexation. The photoswitching of the DAE@CB7 complex, upon alternating UV and visible light irradiations, can be repeated 2560 times in aqueous solution before half-bleaching occurs (comparable to fatigue resistance of the reversibly photoswitchable proteins), while free DAE can be switched on and off only 80 times. By incorporation of reactive groups [maleimide and N-hydroxysuccinimidyl (NHS) ester], we prepared bioconjugates of DAE@CB7 with antibodies and demonstrated both specific labeling of intracellular proteins in cells and the reversible on/off switching of the probes in cellular environments under irradiations with 355 nm/485 nm light. The bright emission and robust photoswitching of DAE-Male3@CB7 and DAE-NHS@CB7 complexes (without exclusion of air oxygen and addition of any stabilizing/antifading reagents) enabled confocal and super-resolution RESOLFT (reversible saturable optical fluorescence transitions) imaging with apparent 70–90 nm optical resolution.

A facile way to construct sensor array library via supramolecular chemistry for discriminating complex systems

Differential sensing, which discriminates analytes via pattern recognition by sensor arrays, plays an important role in our understanding of many chemical and biological systems. However, it remains challenging to develop new methods to build a sensor unit library without incurring a high workload of synthesis. Herein, we propose a supramolecular approach to construct a sensor unit library by taking full advantage of recognition and assembly. Ten sensor arrays are developed by replacing the building block combinations, adjusting the ratio between system components, and changing the environment. Using proteins as model analytes, we examine the discriminative abilities of these supramolecular sensor arrays. Then the practical applicability for discriminating complex analytes is further demonstrated using honey as an example. This sensor array construction strategy is simple, tunable, and capable of developing many sensor units with as few syntheses as possible.

Distinguishing cancer cells from normal cells with an organelle-targeted fluorescent marker

In this paper we report a hemicyanine dye that is used to distinguish cancer cells from normal cells with its ability to target different organelles. Probe 1, a red emission hemicyanine functional dye, was connected to oxazolo[4,5-b]pyridine and diethylaminobenzene with a double bond. The maximum absorption peaks of probe 1 were located in the 509-552 nm range in organic solvents. Meanwhile, the probe possessed a high molar extinction coefficient (5.50 × 10⁴ M^-1 cm^-1 in DMSO) with high photostability. The maximum emission wavelength of the probe ranged from 572 nm to 644 nm, and it also had a large Stokes shift (126 nm in DMSO). In particular, the probe showed weak fluorescence in water (Φ = 0.016), whereas it displayed strong fluorescence at 595 nm in β-cyclodextrin (β-CD) solution (Φ = 0.13). In addition, cell colocalization experiments showed that probe 1 (3 μM) was located in the endoplasmic reticulum in cancer cells, while it could target lysosomes in normal cells. What's more, further cell imaging experiments demonstrated that the average fluorescence intensity of probe 1 (0.3 μM) in cancer cells increased with the addition of β-CD, but it did not occur in normal cells. The study provides a convenient way to distinguish cancer cells from normal ones, which has potential for application in the early detection of cancer.

Recent advances in macrocyclic arenes-based fluorescent indicator displacement assays

Macrocyclic arenes-based fluorescent indicator displacement assays (F-IDAs) offer a unique and innovative approach to chemosensing, taking molecular recognition in host-guest chemistry to a higher level. Because of their special architecture and versatile host–guest binding properties, macrocyclic arenes, principally calix[n]arenes and, in recent years, pillar[n]arenes, in combination with various fluorophores, are widely used in F-IDAs for the specific and selective sensing of cationic, anionic, and neutral analytes. In this paper, we review recent progress in the development of F-IDAs based on macrocyclic arenes and outline the prospects and remaining challenges relating to macrocyclic arenes-based F-IDAs.

Further Dimensions for Sensing in Biofluids: Distinguishing Bioorganic Analytes by the Salt-Induced Adaptation of a Cucurbit[7]uril-Based Chemosensor

Insufficient binding selectivity of chemosensors often renders biorelevant metabolites indistinguishable by the widely used indicator displacement assay. Array-based chemosensing methods are a common workaround but require additional effort for synthesizing a chemosensor library and setting up a sensing array. Moreover, it can be very challenging to tune the inherent binding preference of macrocyclic systems such as cucurbit[n]urils (CBn) by synthetic means. Using a novel cucurbit[7]uril-dye conjugate that undergoes salt-induced adaptation, we now succeeded in distinguishing 14 bioorganic analytes from each other through the facile stepwise addition of salts. The salt-specific concentration-resolved emission provides additional information about the system at a low synthetic effort. We present a data-driven approach to translate the human-visible curve differences into intuitive pairwise difference measures. Ion mobility experiments combined with density functional theory calculations gave further insights into the binding mechanism and uncovered an unprecedented ternary complex geometry for CB7. TThis work introduces the non-selectively binding, salt-adaptive cucurbit[n]uril system for sensing applications in biofluids such as urine, saliva, and blood serum.

Discrete, Cationic Palladium(II)-Oxo Clusters via f-Metal Ion Incorporation and their Macrocyclic Host-Guest Interactions with Sulfonatocalixarenes

We report on the discovery of the first two examples of cationic palladium(II)‐oxo clusters (POCs) containing f‐metal ions, [Pd^II₆O₁₂M₈{(CH₃)₂AsO₂}₁₆(H₂O)₈]⁴⁺ (M=Ce^IV, Th^IV), and their physicochemical characterization in the solid state, in solution and in the gas phase. The molecular structure of the two novel POCs comprises an octahedral {Pd₆O₁₂}¹²⁻ core that is capped by eight M^IV ions, resulting in a cationic, cubic assembly {Pd₆O₁₂M^IV₈}²⁰⁺, which is coordinated by a total of 16 terminal dimethylarsinate and eight water ligands, resulting in the mixed Pd^II‐Ce^IV/Th^IV oxo‐clusters [Pd^II₆O₁₂M₈{(CH₃)₂AsO₂}₁₆(H₂O)₈]⁴⁺ (M=Ce, Pd₆Ce₈; Th, Pd₆Th₈). We have also studied the formation of host‐guest inclusion complexes of Pd₆Ce₈ and Pd₆Th₈ with anionic 4‐sulfocalix[n]arenes (n=4, 6, 8), resulting in the first examples of discrete, enthalpically‐driven supramolecular assemblies between large metal‐oxo clusters and calixarene‐based macrocycles. The POCs were also found to be useful as pre‐catalysts for electrocatalytic CO₂‐reduction and HCOOH‐oxidation.

Noninvasive and Individual-Centered Monitoring of Uric Acid for Precaution of Hyperuricemia via Optical Supramolecular Sensing

Characterized by an excessively increased uric acid (UA) level in serum, hyperuricemia induces gout and also poses a great threat to renal and cardiovascular systems. It is urgent and meaningful to perform early warning by noninvasive diagnosis, thus conducing to blockage of disease aggravation. Here, guanidinocalix[5]arene (GC5A) is successfully identified from the self-built macrocyclic library to specifically monitor UA from urine by the indicator displacement assay. UA is strongly bound to GC5A at micromolar-level, while simultaneously excluding fluorescein (Fl) from the GC5A·Fl complex in the "switch-on" mode. This method successfully differentiates patients with hyperuricemia from volunteers except for those with kidney dysfunction and targets a volunteer at high risk of hyperuricemia. In order to meet the trend from hospital-centered to individual-centered testing, visual detection of UA is studied through a smartphone equipped with a color-scanning feature, whose adaptability and feasibility are demonstrated in sensing UA from authentic urine, leading to a promising method in family-centered healthcare style. A high-throughput and visual detection method is provided here for alarming hyperuricemic by noninvasive diagnosis.

Color-Tunable Supramolecular Luminescent Materials

Constructing multicolor photoluminescent materials with tunable properties is an attractive research objective on account of their abundant applications in materials science and biomedical engineering. By comparison with covalent synthesis, supramolecular chemistry has provided a more competitive and promising strategy for the production of organic materials and the regulation of their photophysical properties. By taking advantage of dynamic and reversible noncovalent bonding interactions, supramolecular strategies can, not only simplify the design and fabrication of organic materials, but can also endow them with dynamic reversibility and stimuli responsiveness, making it much easier to adjust the superstructures and properties of the materials. Occasionally, it is possible to introduce emergent properties into these materials, which are absent in their precursor compounds, broadening their potential applications. In an attempt to highlight the state-of-the-art noncovalent strategies available for the construction of smart luminescent materials, an overview of color-tunable materials is presented in this Review, with the emphasis being placed on the examples drawn from host-guest complexes, supramolecular assemblies and crystalline materials. The noncovalent synthesis of room-temperature phosphorescent materials and the modulation of their luminescent properties are also described. Finally, future directions and scientific challenges in the emergent field of color-tunable supramolecular emissive materials are discussed.

Ternary host-guest complexes with rapid exchange kinetics and photoswitchable fluorescence

Confinement within molecular cages can dramatically modify the physicochemical properties of the encapsulated guest molecules, but such host-guest complexes have mainly been studied in a static context. Combining confinement effects with fast guest exchange kinetics could pave the way toward stimuli-responsive supramolecular systems—and ultimately materials—whose desired properties could be tailored “on demand” rapidly and reversibly. Here, we demonstrate rapid guest exchange between inclusion complexes of an open-window coordination cage that can simultaneously accommodate two guest molecules. Working with two types of guests, anthracene derivatives and BODIPY dyes, we show that the former can substantially modify the optical properties of the latter upon noncovalent heterodimer formation. We also studied the light-induced covalent dimerization of encapsulated anthracenes and found large effects of confinement on reaction rates. By coupling the photodimerization with the rapid guest exchange, we developed a new way to modulate fluorescence using external irradiation.

•

A coordination cage encapsulates various anthracenes and BODIPY dyes as homodimers

•

Mixing the two homodimers leads to the formation of anthracene-BODIPY heterodimers

•

Encapsulation can either promote or suppress the photodimerization of anthracenes

•

The homodimer/heterodimer equilibrium can be tuned by light-induced guest exchange

Confinement of small molecules within the cavities of natural and synthetic hosts can greatly affect the physicochemical properties of the bound species; however, to date, such host-guest complexes have been studied mainly in a static context. An important direction is the development of host-guest systems, whereby encapsulation and release of guest molecules can be reversibly controlled using light. Here, we report ternary inclusion complexes comprising an open-window coordination cage and two kinds of photoactive guests, namely, the photodimerizable anthracenes and BODIPY dyes. Alternating exposure to two different colors of light shifts the equilibrium between the encapsulated homodimers and heterodimers, thus dramatically affecting the system’s optical properties. We also find that the rates of both processes—anthracene dimerization and guest exchange—strongly depend on the substitution pattern on both types of guests, which highlights the importance of confinement effects.

The Detection of Food Additives Using a Fluorescence Indicator Based on 6– p–Toluidinylnaphthalence-2-sulfonate and Cationic Pillar[6]arene

The current study investigated host-guest complexation in 6-p-toluidinylnaphthalene-2-sulfonate (TNS), a fluorescence probe used to investigate hydrophobic regions that contain the water-soluble cationic pillar[6]arene (CP6). After complexation with CP6, the fluorescence intensity of TNS was significantly increased. The decreases in the fluorescence intensity of the TNS•CP6 complex when phenolic food-additives are added have been used in indicator displacement assays to detect food additives in the water.

Green Synthesis of Au-NPs on g-C3N4 Hybrid Nanomaterials Based on Supramolecular Pillar[6]arene and Its Applications for Catalysis

Gold nanoparticles (Au NPs) are installed in situ on the surfaces of graphitic carbon nitride (g-C₃N₄) based on supramolecular hydroxylatopillar[6]arene (P6). The Au NPs can be obtained via the redox reaction between HAuCl₄ and P6 without any NH₂-NH₂, NaBH₄, and other reductants, where AuCl₄ ^- is reduced to Au⁰ by the -OH groups in the presence of OH^-, and the -OH groups are oxidized into -COOH. First, P6 is loaded onto the surface of g-C₃N₄ via π-π interaction between P6 and g-C₃N₄, which offers a stabilized and reduced site for in situ anchoring of Au NPs. The hybrid nanomaterial Au-NPs@P6@g-C₃N₄ exhibits higher catalytic capability than the Pd/C catalyst in 4-nitrophenol (4-NP) reduction and methylene blue degradation, which opens a new avenue for designing more efficient hybrid nanomaterials for application in catalysis, sensing, and other fields.

A host-guest strategy for converting the photodynamic agents from a singlet oxygen generator to a superoxide radical generator

Type-I photosensitizers (PSs) generate cytotoxic oxygen radicals by electron transfer even in a hypoxic environment. Nevertheless, the preparation of type-I PSs remains a challenge due to the competition of triplet–triplet energy transfer with O₂ (type-II process). In this work, we report an effective strategy for converting the conventional type-II PS to a type-I PS by host–guest complexation. Electron-rich pillar[5]arenes are used as an electron donor and macrocyclic host to produce a host–guest complex with the traditional electron-deficient type-II PS, an iodide BODIPY-based guest. The host–guest complexation promotes intermolecular electron transfer from the pillar[5]arene moiety to BODIPY and then to O₂ by the type-I process upon light-irradiation, leading to efficient generation of the superoxide radical (O₂⁻˙). The results of anti-tumor studies indicate that this supramolecular PS demonstrates high photodynamic therapy efficacy even under hypoxic conditions. This work provides an efficient method to prepare type-I PSs from existing type-II PSs by using a supramolecular strategy.

A supramolecular strategy is reported for converting the conventional photodynamic agents from a singlet oxygen generator to a superoxide radical generator by the host–guest interaction enhanced electron transfer.

Cucurbituril-Based Supramolecular Assemblies: Prospective on Drug Delivery, Sensing, Separation, and Catalytic Applications

Precise control over the stimuli-responsive noncovalent interactions operative in a complex molecular system has emerged as a convenient way to realize applications in the detection and sensing of trace analytes, metal ion separation, uptake-release, in situ nanoparticle synthesis, and catalytic activity. This feature article focuses on the attributes and advantages of noncovalent host-guest interactions involving cucurbituril homologues (CBs) with a wide range of organic and inorganic guests, starting from organic dyes to drugs, proteins, surfactants, metal ions, and polyoxometalates. The unique structural features of CBs provide interaction sites for cations at the portals, polyanions at the periphery, and hydrophobic groups in its cavity. The facile complexation and consequent compositional and geometrical arrangements of guests such as naphthalenediimides, coumarins, porphyrins, and triphenylpyrylium ions with the host CBs led to remarkable changes in many molecular properties, especially aggregation, the proton binding and release affinity, and novel emissive dimers, and each of such spectroscopic signatures have been appropriately channeled to drug delivery and activation to improve the antibacterial efficacy and shelf life of drugs by increasing their photostability. Several technological advantages have also been extracted from the interaction of CBs with inorganic guests as well. The interaction of CB7 with the heptamolybdate anion resulted in the precipitation of a hybrid complex material which enabled a convenient separation methodology for the use of clinically pure radioactive ^99mTc in diagnostic applications. Certain cucurbituril-based hybrid materials have been developed for enhanced SO₂ adsorption at low pressures, high-efficiency hydrogen production, and reversible catalytic systems. Thus, this feature article provides a glimpse of the vast potential of cucurbituril homologues with organic and inorganic guests and calls for a dedicated effort to explore supramolecular strategies for better sensors, therapeutics, smart drug delivery modules, and facile devices.

Multicharged cyclodextrin supramolecular assemblies

Multicharged cyclodextrin (CD) supramolecular assemblies, including those based on positively/negatively charged modified mono-6-deoxy-CDs, per-6-deoxy-CDs, and random 2,3,6-deoxy-CDs, as well as parent CDs binding positively/negatively charged guests, have been extensively applied in chemistry, materials science, medicine, biological science, catalysis, and other fields. In this review, we primarily focus on summarizing the recent advances in positively/negatively charged CDs and parent CDs encapsulating positively/negatively charged guests, especially the construction process of supramolecular assemblies and their applications. Compared with uncharged CDs, multicharged CDs display remarkably high antiviral and antibacterial activity as well as efficient protein fibrosis inhibition. Meanwhile, charged CDs can interact with oppositely charged dyes, drugs, polymers, and biomacromolecules to achieve effective encapsulation and aggregation. Consequently, multicharged CD supramolecular assemblies show great advantages in improving drug-delivery efficiency, the luminescence properties of materials, molecular recognition and imaging, and the toughness of supramolecular hydrogels, in addition to enabling the construction of multistimuli-responsive assemblies. These features are anticipated to not only promote the development of CD-based supramolecular chemistry but also contribute to the rapid exploitation of these assemblies in diverse interdisciplinary applications.

Transient Host-Guest Complexation To Control Catalytic Activity

Signal transduction mechanisms are key to living systems. Cells respond to signals by changing catalytic activity of enzymes. This signal responsive catalysis is crucial in the regulation of (bio)chemical reaction networks (CRNs). Inspired by these networks, we report an artificial signal responsive system that shows signal-induced temporary catalyst activation. We use an unstable signal to temporarily activate an out of equilibrium CRN, generating transient host–guest complexes to control catalytic activity. Esters with favorable binding toward the cucurbit[7]uril (CB[7]) supramolecular host are used as temporary signals to form a transient complex with CB[7], replacing a CB[7]-bound guest. The esters are hydrolytically unstable, generating acids and alcohols, which do not bind to CB[7], leading to guest reuptake. We demonstrate the feasibility of the concept using signal-controlled temporary dye release and reuptake. The same signal controlled system was then used to tune the reaction rate of aniline catalyzed hydrazone formation. Varying the ester structure and concentration gave access to different catalyst liberation times and free catalyst concentration, regulating the overall reaction rate. With temporary signal controlled transient complex formation we can tune the kinetics of a second chemical reaction, in which the signal does not participate. This system shows promise for building more complex nonbiological networks, to ultimately arrive at signal transduction in organic materials.