2-Aminobiphenyl Palladacycles: The “Most Powerful” Precatalysts in C–C and C–Heteroatom Cross-Couplings

Sustainable ppm level palladium-catalyzed aminations in nanoreactors under mild, aqueous conditions

A 1 : 1 Pd : ligand complex, [t-BuXPhos(Pd-π-cinnamyl)]OTf, has been identified as a highly robust pre-catalyst for amination reactions leading to diarylamines, where loadings of metal are typically at 1000 ppm Pd, run in water at temperatures between rt and 45 °C. The protocol is exceptionally simple, is readily scaled, and compares very favorably vs. traditional amination conditions. It has also been shown to successfully lead to key intermediates associated with several physiologically active compounds.

A new, substituted palladacycle for ppm level Pd-catalyzed Suzuki-Miyaura cross couplings in water

A newly engineered palladacycle that contains substituents on the biphenyl rings along with the ligand HandaPhos is especially well-matched to an aqueous micellar medium, enabling valued Suzuki-Miyaura couplings to be run not only in water under mild conditions, but at 300 ppm of Pd catalyst. This general methodology has been applied to several targets in the pharmaceutical area. Multiple recyclings of the aqueous reaction mixture involving both the same as well as different coupling partners is demonstrated. Low temperature microscopy (cryo-TEM) indicates the nature and size of the particles acting as nanoreactors. Importantly, given the low loadings of Pd invested per reaction, ICP-MS analyses of residual palladium in the products shows levels to be expected that are well within FDA allowable limits.

Optimisation of a key cross-coupling reaction towards the synthesis of a promising antileishmanial compound

•

Buchwald-Hartwig coupling of 3-bromo-1H-pyrazolo[3,4-d]pyrimidine with 3-methylmorpholine.

•

Optimisation led to RuPhos, KHMDS and SEM as the optimal protecting group.

•

These conditions delivered 9 g of (R)-1 in high purity plus close analogues.

During the course of a research program aimed at identifying novel antileishmanial compounds, a multi-gram synthesis of N-(trans-4-((4-methoxy-3-((R)-3-methylmorpholino)-1H-pyrazolo[3,4-d]pyrimidin-6-yl)amino)cyclohexyl)-2-methylpropane-1-sulfonamide ((R)-1) was required. This letter describes optimisation of the reaction conditions and protecting group strategy for a key Buchwald-Hartwig coupling, delivering the required quantities of (R)-1, as well as further compounds in the series.

Aminophosphine Palladium Pincer-Catalyzed Carbonylative Sonogashira and Suzuki-Miyaura Cross-Coupling with High Catalytic Turnovers

This work documents the first palladium pincer complex-catalyzed carbonylative Sonogashira (CS) and carbonylative Suzuki-Miyaura (CSM) cross-coupling. Compared to previous protocols, which employ hazardous and toxic solvents, the aminophosphine pincer complex {[C₆H₃-2,6-(NHP{piperidinyl}₂)₂]Pd(Cl)} (III) catalyzes both the cross-coupling reactions in propylene carbonate, an eco-friendly and sustainable polar aprotic solvent. Advantageously, employing III allows the CS cross-coupling to be carried out at a palladium loading of 10^-4 mol % and the CSM cross-coupling to be carried out at 10^-6 mol %, thus resulting in catalytic turnovers of 10⁵ and 10⁷, respectively. Relative comparison of the pincer complex with conventional palladium precursors Pd(OAc)₂ and PdCl₂(PPh₃)₂ shows the efficiency and robustness of the pincer complex in effecting higher catalytic activity at low palladium loadings.

Rigid hindered N-heterocyclic carbene palladium precatalysts: synthesis, characterization and catalytic amination

Rigid hindered N-heterocyclic carbene palladium complexes have been developed and exhibited high activities for a variety of (hetero)aryl chlorides with (hetero)anilines and amines under aerobic conditions.

Dihalogen-bridged NHC–palladium(i) dimers: synthesis, characterisation and applications in cross-coupling reactions

Diiodo-bridged, dinuclear NHC–Pd^I complexes have been synthesised and utilised as one-component pre-catalysts for Suzuki–Miyaura, Buchwald–Hartwig, and Sonogashira reactions.

Syntheses and structural aspects of six-membered palladacyclic complexes derived fromN,N′,N′′-triarylguanidines with N- or S-thiocyanate ligands

Linkage isomers8·2/3PhMe and9·MeOH were synthesized, isolated and structurally characterized by SCXRD and the role of solvent of crystallization in the formation of these linkage isomers identified.

Mesityl(amidinato)tetrylenes as ligands in iridium(i) and iridium(iii) complexes: silicon versus germanium and simple κ1-coordination versus cyclometallation

The reactivity of the germylene Ge(^tBu₂bzam)Mes with [Ir₂(μ-Cl)₂(η⁴-cod)₂] and [Ir₂Cl₂(μ-Cl)₂(η⁵-Cp*)₂] differs considerably from that previously communicated for the isostructural silylene Si(^tBu₂bzam)Mes.

Synthesis of aryl-thioglycopeptides through chemoselective Pd-mediated conjugation

We describe herein a Pd-catalyzed methodology for the thioglycoconjugation of iodoaryl peptides and aminoacids. This operationally simple process occurs under semi-aqueous conditions and displays wide substrate scope. The strategy has been successfully applied to both the thioglycosylation of unprotected peptides and the generation of thioglyco-aminoacid building blocks, including those suitable for solid phase peptide synthesis. To demonstrate the broad potential of this technique for late stage functionalization, we successfully incorporated challenging unprotected β-S-GlcNAc- and α-S-GalNAc-derivatives into very long unprotected peptides. This study opens the way to new applications in chemical biology, considering the well-recognized advantages of S-glycosides over O-glycosides in terms of resistance towards both enzymatic and chemical degradation.

Cyclometallation of a germylene ligand by concerted metalation-deprotonation of a methyl group

The reaction of [CH{(CMe)(2,6-iPr2C6H3N)}2]GeCl with LiN(SiMe3)2 was previously reported, which led to the formation of a hetero-fulvene type germylene, [CH{(CMe)(C[double bond, length as m-dash]CH2)(2,6-iPr2C6H3N)}2]Ge through the deprotonation of the C-H bond from the methyl substituents. In this paper, we attempted the analogous reaction with (Dipp)NCMeCHCOMeGeCl using LiN(SiMe3)2 which gave rise to a metathesis product, (Dipp)NCMeCHCOMeGeN(SiMe3)2 (2). However, the reactions of 2 with [M2Cl2(μ-Cl)2(η5-Cp*)2] (M = Rh and Ir) resulted in cyclometallated Rh and Ir complexes through the activation of the C-H bond from the germylene ligand. The complexes were characterized by single crystal X-ray analysis, which authenticated the presence of Ge-Rh and Ge-Ir bonds. DFT studies have been performed to understand the mechanism.

Promoting Difficult Carbon-Carbon Couplings: Which Ligand Does Best?

A Pd complex, cis-[Pd(C₆ F₅ )₂ (THF)₂ ] (1), is proposed as a useful touchstone for direct and simple experimental measurement of the relative ability of ancillary ligands to induce C-C coupling. Interestingly, 1 is also a good alternative to other precatalysts used to produce Pd⁰ L. Complex 1 ranks the coupling ability of some popular ligands in the order P^t Bu₃ >o-TolPEWO-F≈tBuXPhos>P(C₆ F₅ )₃ ≈PhPEWO-F>P(o-Tol)₃ ≈THF≈tBuBrettPhos≫Xantphos≈PhPEWO-H≫PPh₃ according to their initial coupling rates, whereas their efficiency, depending on competitive hydrolysis, is ranked tBuXPhos≈P^t Bu₃ ≈o-TolPEWO-F>PhPEWO-F>P(C₆ F₅ )₃ ≫tBuBrettPhos>THF≈P(o-Tol)₃ >Xantphos>PhPEWO-H≫PPh₃ . This "meter" also detects some other possible virtues or complications of ligands such as tBuXPhos or tBuBrettPhos.

Polystyrene-Supported Acyclic Diaminocarbene Palladium Complexes in Sonogashira Cross-Coupling: Stability vs. Catalytic Activity

Two types of immobilized on the amino-functionalized polystyrene-supported acyclic diaminocarbene palladium complexes (ADC-PdII) are investigated under Sonogashira cross-coupling conditions. Depending on substituents in the diaminocarbene fragment immobilized ADC-PdII, systems are found to have different catalytic activity and stability regarding Pd-leaching. PdII-diaminocarbenes possessing protons at both nitrogen atoms smoothly decompose into Pd0-containing species providing a catalytic “cocktail system” with high activity and ability to reuse within nine runs. Polymer-supported palladium (II) complex bearing NBn–Ccarbene–NH-moiety exhibits greater stability while noticeably lower activity under Sonogashira cross-coupling. Four molecular ADC-PdII complexes are also synthesized and investigated with the aim of confirming proposed base-promoted pathway of ADC-PdII conversion through carbodiimide into an active Pd0 forms.

Efficient Buchwald-Hartwig-Migita Cross-Coupling for DNA Thioglycoconjugation

An efficient method for the thioglycoconjugation of iodinated oligonucleotides by Buchwald-Hartwig-Migita cross-coupling under mild conditions is reported. The method enables divergent synthesis of many different functionalized thioglycosylated ODNs in good yields, without affecting the integrity of the other A, C, and G nucleobases.

Modification of Boc-Protected CAN508 via Acylation and Suzuki-Miyaura Coupling

The cyclin-dependent kinase inhibitor, CAN508, was protected with di-tert-butyl dicarbonate to access the amino-benzoylated pyrazoles. The bromo derivatives were further arylated by Suzuki-Miyaura coupling using the XPhos Pd G2 pre-catalyst. The coupling reaction provided generally the para-substituted benzoylpyrazoles in the higher yields than the meta-substituted ones. The Boc groups were only utilized as directing functionalities for the benzoylation step and were hydrolyzed under conditions of Suzuki-Miyaura coupling, which allowed for elimination of the additional deprotection step.

Optimum catalyst selection over continuous and discrete process variables with a single droplet microfluidic reaction platform

A mixed-integer nonlinear program (MINLP) algorithm to optimize catalyst turnover number (TON) and product yield by simultaneously modulating discrete variables—catalyst types—and continuous variables—temperature, residence time, and catalyst loading—was implemented and validated.

Synthesis of Polyflourinated Biphenyls; Pushing the Boundaries of Suzuki-Miyaura Cross Coupling with Electron-Poor Substrates

Polyfluorinated biphenyls are interesting and promising substrates for many different applications. Unfortunately, all current methods for the syntheses of these compounds only work for a hand full of molecules or only in very special cases. Thus, many of these compounds are still inaccessible to date. Here we report a general strategy for the synthesis of a wide range of highly fluorinated biphenyls. In our studies we investigated crucial parameters, such as different phosphine ligands and the influence of various nucleophiles and electrophiles with different degrees of fluorination. These results extend the scope of the already very versatile Suzuki–Miyaura reaction toward the synthesis of very electron-poor products, making these more readily accessible. The presented methodology is scalable and versatile without the need for elaborate phosphine ligands or Pd-precatalysts.

Controllable Activation of Pd-G3 Palladacycle Precatalyst in the Presence of Thiosugars: Rapid Access to 1-Aminobiphenyl Thioglycoside Atropoisomers at Room Temperature

A controllable method for the functionalization of XantPhos Pd-G3 precatalyst with thiosugars and thiols has been established. Under mild and operationally simple reaction conditions through just mixing of precatalyst and thiosugars (α- or β-mono-, di- and poly-thiosugar derivatives) in water at 25 °C for 20 min, a series of 1-aminobiphenyl thioglycosides that are difficult to synthesize by classical methods has been synthesized in very high yields.

Synthesis and Catalytic Applications of a Triptycene-Based Monophosphine Ligand for Palladium-Mediated Organic Transformations

1-Methoxy-8-(diphenylphosphino)triptycene (1), featuring high structural rigidity and steric bulkiness around the phosphine functionality, was synthesized as a new chiral monophosphine ligand for transition metal-catalyzed reactions. In the presence of 5-10 mol ppm (i.e., 0.0005-0.001 mol %) Pd(OAc)₂ and 1 (2 equiv for Pd), Suzuki-Miyaura cross-coupling reactions of aryl bromides and arylboronic acids proceeded effectively under mild atmospheric conditions to give the corresponding biaryl compounds in a high yield. The single-crystal X-ray analysis of a Pd(II) complex of 1 revealed its coordination structure, in which two homochiral molecules form a dimer, suggesting that triptycene could provide a chiral environment for asymmetric organic transformations. In fact, optically active 1 obtained by optical resolution showed good enantioselectivity in the palladium-catalyzed asymmetric hydrosilylation of styrene, which represents, for the first time, the asymmetric catalytic activity of triptycene-based monophosphine ligands.

Highly bulky and stable geometry-constrained iminopyridines: Synthesis, structure and application in Pd-catalyzed Suzuki coupling of aryl chlorides

A series of bulky geometry-constrained iminopyridylpalladium chlorides were developed. The steric environment adjacent to the nitrogen atom in the pyridine rings and diimine parts enhanced the thermal stability of the palladium species. Bulkier groups at the imino group stabilized the palladium species and the corresponding palladium chlorides showed high activities in the coupling reaction of aryl chlorides.

Pd-Catalyzed Suzuki coupling reactions of aryl halides containing basic nitrogen centers with arylboronic acids in water in the absence of added base

Successful Suzuki reactions of basic nitrogen containing aryl chlorides/bromides with arylboronic acids in water without added base, partially or entirely under acidic conditions.

Spectroscopic characterization of (diiodomethyl)zinc iodide: application to the stereoselective synthesis and functionalization of iodocyclopropanes

Herein are described more efficient methodologies for the synthesis of highly substituted cyclopropanes as well as the first characterization of a diiodomethylzinc carbenoid.