Mechanism of catalytic ozonation in Fe ₂O₃/Al ₂O₃@SBA-15 aqueous suspension for destruction of ibuprofen

Enhanced Catalytic Ozonation for Eliminating CH3SH via Stable and Circular Electronic Metal-Support Interactions of Si-O-Mn Bonds with Low Mn Loading

Catalytic ozonation of methyl mercaptan (CH₃SH) can effectively control this unbearable odorous sulfur-containing volatile organic compound (S-VOC). The construction of an electronic metal-support interaction (EMSI) coordination structure to maximize the number of active sites and increase the intrinsic activity of active sites is an effective means to improve catalytic performance. In this work, the abundant Si-OH groups on PSBA-15 (SBA-15 before calcination) were used to anchor Mn to form a Si-O-Mn-based EMSI coordination structure. Detailed characterizations and theoretical simulations reveal that the strong EMSI effect significantly adjusts and stabilizes the electronic structure of Mn 3d states, resulting in an electron-rich center on the Si-O-Mn bond to promote the specific adsorption/activation of ozone (O₃) and an electron-poor center on the (Si-O-)Mn-O bond to adsorb a large amount of CH₃SH accompanied by its own oxidative degradation. In situ Raman and in situ Fourier transform infrared (FTIR) analyses identify that catalytic ozonation over 3.0Mn-PSBA generates atomic oxygen species (AOS/*O) and reactive oxygen species (ROS/^•O₂^-) to achieve efficient decomposition of CH₃SH into CO₂/SO₄^2-. Furthermore, the electrons obtained from CH₃SH in electron-poor centers are transferred to maintain the redox cycle of Mn^2+/3+ → Mn⁴⁺ → Mn^2+/3+ through the internal bond bridge, thus accomplishing the efficient and stable degradation of CH₃SH prolonged to 180 min. Therefore, the rational design of catalysts with abundant active sites and optimized inherent activity via the EMSI effect can provide significant potential to improve catalytic performance and eliminate odorous gases.

Advanced catalytic ozonation for degradation of pharmaceutical pollutants-A review

Various chemical treatment techniques are involved in removing refractory organic compounds from water and wastewater using the oxidation reaction of hydroxyl radicals (^•OH). The use of catalysts in advanced catalytic ozonation is likely to improve the decomposition of molecular ozone to generate highly active free radicals that facilitate the rapid and efficient mineralization and degradation of numerous organics. For the degradation of toxic organic pollutants in wastewater, the advanced catalytic ozonation process has been widely applied in recent years. Low utilization efficiency of ozone and ineffective mineralization of organic contaminants by ozone can be remedied with advanced catalytic ozonation. Advanced catalytic ozonation has gained popularity because of these merits. However, homogeneous catalytic ozonation has the disadvantage of producing secondary contaminants from the addition of metallic ions. Heterogeneous catalytic ozonation can overcome this drawback by utilizing metals, metallic oxides, and carbon materials as a catalyst of efficacy and stability. This review discusses various aspects of catalytic ozonation in wastewater treatment of pharmaceutical pollutants, application of catalytic ozonation process in typical wastewater, and prospects in advancing the techniques in heterogeneous catalytic ozonation.

Interface mechanisms of the catalytic ozonation of humic acids over siliceous ferrihydrite: Morphology, stability, and the catalytic process

Ferrihydrite (Fh), a precursor of more crystalline Fe (hydr)oxides, exhibits decent catalytic behavior; however, the instability of its amorphous structure limits its engineering applications. Siliceous ferrihydrite (FhSi) was readily synthesized in this study by co-precipitation. The formation of Fe-O-Si linkages did not alter the amorphous state of pure Fh, but increased the surface area (S_BET), reduced the point of zero charge (pH_ZPC), and prevented the leaching of more iron. X-ray diffraction, Mössbauer and pyridine-Fourier transform infrared (FTIR) spectroscopies, and potentiometric titration revealed the presence of silicon-occupied portions of growth sites on the Fh surface, which increased the coordination symmetry around the Fe atom and inhibited the transition of Fh to more stable crystalline Fe (hydr)oxides during repeated use. Meanwhile, the density of surface hydroxyl groups (Ds) and the total acid content of the catalytic system after five cycles of catalytic ozonation were 56.75 % and 63.58 % higher than those of freshly prepared system, thereby benefiting the catalysis of ozone for generating ·OH. In addition, the lower pH_ZPC of the FhSi/O₃ system compared to that of the Fh/O₃ system promoted the generation of neutral surface-hydroxyl species on the surface of FhSi, which enabled a decent catalytic performance in alkaline solutions, regardless of the catalytic cycle. Moreover, the removal of humic acids (HA) followed a hydroxy radical reaction, which involved self-decomposition (14.15 %), catalytic ozonation (21.58 %), and peroxone and Fenton-like reactions (64.27 %).

Enhanced Ozone Oxidation by a Novel Fe/Mn@γ−Al2O3 Nanocatalyst: The Role of Hydroxyl Radical and Singlet Oxygen

Catalytic ozonation is a potential alternative to address the dye wastewater effluent, and developing an effective catalyst for catalyzing ozone is desired. In this study, a novel Fe/Mn@γ−Al2O3 nanomaterial was prepared and successfully utilized for catalytic ozonation toward dye wastewater effluent components (dimethyl phthalate and 1−naphthol). The synthesized Fe/Mn@γ−Al2O3 exhibited superior activity in catalytic ozonation of dimethyl phthalate and 1−naphthol in contrast to Fe@γ−Al2O3 and Mn@γ−Al2O3. Quench and probe tests indicated that HO° contributed to almost all removal of dimethyl phthalate, whereas O3, HO°, and singlet oxygen participated in the degradation of 1−naphthol in the Fe/Mn@γ−Al2O3/O3 system. The results of XPS, FT−IR, and EPR suggested that HO° and singlet oxygen were generated from the valence variations of Fe(II/III)and Mn(III/IV). Moreover, the Fe/Mn@γ−Al2O3/O3 system could also have excellent efficacy in actual water samples, including dye wastewater effluent. This study presents an efficient ozone catalyst to purify dye wastewater effluent and deepens the comprehension of the role and formation of reactive species involved in the catalytic ozonation system.

Enhanced Catalytic Ozonation for Eliminating CH3SH via Graphene-Supported Positively Charged Atomic Pt Undergoing Pt2+/Pt4+ Redox Cycle

Constructing catalysts with electronic metal-support interaction (EMSI) is promising for catalytic reactions. Herein, graphene-supported positively charged (Pt²⁺/Pt⁴⁺) atomically dispersed Pt catalysts (AD-Pt-G) with Pt_xC₃ (x = 1, 2, and 4)-based EMSI coordination structures are achieved for boosting the catalytic ozonation for odorous CH₃SH removal. A CH₃SH removal efficiency of 91.5% can be obtained during catalytic ozonation using optimum 0.5AD-Pt-G within 12 h under a gas hourly space velocity of 60,000 mL h^-1 g^-1, whereas that of pure graphene is 40.4%. Proton transfer reaction time-of-flight mass spectrometry, in situ diffuse reflectance infrared Fourier transform spectroscopy/Raman, and electron spin resonance verify that the Pt_xC₃ coordination structure with atomic Pt²⁺ sites on AD-Pt-G can activate O₂ to generate peroxide species (*O₂) for partial oxidation of CH₃SH during the adsorption period and trigger O₃ into surface atomic oxygen (*O_ad), *O₂, and superoxide radicals (·O₂^-) to accomplish a stable, high-efficiency, and deeper oxidation of CH₃SH during the catalytic ozonation stage. Moreover, the results of XPS and DFT calculation imply the occurrence of Pt²⁺ → Pt⁴⁺ → Pt²⁺ recirculation on Pt_xC₃ for AD-Pt-G to maintain the continuous catalytic ozonation for 12 h, i.e., Pt²⁺ species devote electrons in 5d-orbitals to activate O₃, while Pt⁴⁺ species can be reduced back to Pt²⁺ via capturing electrons from CH₃SH. This study can provide novel insights into the development of atomically dispersed Pt catalysts with a strong EMSI effect to realize excellent catalytic ozonation for air purification.

Removal of pharmaceuticals by advanced treatment methods

The removal of endocrine disrupting compounds (EDCs) remains a big challenge in water treatment in terms of public health. The aim of the study was evaluating the performance of nano TiO2, ozone, and UV system for removal of EDCs. In this study, the efficiency of the nano TiO₂ to degrade target EDCs under catalytic and photocatalytic ozonation was examined at different operational conditions. The maximum removal of target pollutant was obtained with pH 6.8; ozone concentration 10 mg/L; catalyst dosage 0.050 g/L and the duration time of the photocatalytic performances was 10 min showing the most treatment conditions respectively. In addition, the surface reaction mechanism of endocrine disrupting compound removal by catalytic and photocatalytic ozonation was investigated. The results showed that the catalyst can significantly enhance the removal of target compound. The 99.0%, 88.3% and 51.8% removal rates were obtained at photocatalytic ozonation, catalytic ozonation and sole ozonation, respectively. These results indicated that the Ozone/TiO₂/UV process was favorable for engineering applications for removal of endocrine disrupting compounds such as steroid hormone and likely similar micro pollutants.

Recent Progress and Prospects in Catalytic Water Treatment

Presently, conventional technologies in water treatment are not efficient enough to completely mineralize refractory water contaminants. In this context, the implementation of catalytic processes could be an alternative. Despite the advantages provided in terms of kinetics of transformation, selectivity, and energy saving, numerous attempts have not yet led to implementation at an industrial scale. This review examines investigations at different scales for which controversies and limitations must be solved to bridge the gap between fundamentals and practical developments. Particular attention has been paid to the development of solar-driven catalytic technologies and some other emerging processes, such as microwave assisted catalysis, plasma-catalytic processes, or biocatalytic remediation, taking into account their specific advantages and the drawbacks. Challenges for which a better understanding related to the complexity of the systems and the coexistence of various solid-liquid-gas interfaces have been identified.

Effective mineralization of p-nitrophenol by catalytic ozonation using Ce-substituted La1‒xCexFeO3 catalyst

In this study, cerium-doped lanthanum ferrite perovskite oxides (La_1‒xCe_xFeO₃) with different A-site were synthesized using a sol-gel method and they were used as ozonation catalyst for p-nitrophenol (PNP) mineralization for the first time. Catalytic activity in terms of total organic carbon (TOC) removal followed the order of La_0.8Ce_0.2FeO₃ > La_0.4Ce_0.6FeO₃ > La_0.6Ce_0.4FeO₃ > La_0.2Ce_0.8FeO₃ > LaFeO₃ with 77, 66, 61, 60 and 56% respectively. The synthesized catalysts were characterized by diffraction of X-ray (XRD), Raman spectroscopy, Brunauer-Emmett-Teller (BET) and scanning electronic microscopy (SEM). Moreover, electron spin resonance (ESR) and radicals quenching experiments showed that the active oxygen species in the ozone decomposition process are mainly hydroxyl radical (·OH), and also include superoxide radical (O₂^-) and singlet oxygen (¹O₂). Furthermore, the superior activity of La_0.8Ce_0.2FeO₃ could be attributed to the higher surface area, the richer lattice oxygen, richer surface -OH groups and the facilitated redox Ce³⁺/Ce⁴⁺ and Fe²⁺/Fe³⁺ cycling. In addition, this study provides an insight to use metal-doped perovskite catalysts for catalytic ozonation.

Simultaneous hydrogen production and ibuprofen degradation by green synthesized Cu2O/TNTAs photoanode

This study aimed to produce a clean energy, hydrogen, and to remove pollutants simultaneously in water by photoelectrochemical (PEC) method. The photo-anode of cuprous oxide modified titanate nanotube arrays (Cu₂O/TNTAs) was synthesized by using lactic acid, green tea, and coffee as reductants individually. The characterizations of Cu₂O/TNTAs were performed by ultraviolet-visible diffuse reflectance spectroscopy (UV-vis DRS), field emission scanning electron microscope (FE-SEM), X-ray photoelectron spectroscopy (XPS), and X-ray diffraction (XRD) to investigate the physical and chemical properties such as structure, crystallization, element contents, and optical performance. The electrochemical analyses of Cu₂O/TNTAs showed the photo-current of Cu₂O/TNTAs-t (using green tea as reductant) was 2.4 times higher than pure TNTAs, illustrating the effective separation of electron-hole pairs after Cu₂O modification. The photoelectrochemical performances of Cu₂O/TNTAs-t and Cu₂O/TNTAs-c (using coffee as the reductant) were better than Cu₂O/TNTAs-L (using lactic acid as the reductant) in terms of photo-current density, Ibuprofen degradation, and hydrogen generation, implying that depositing Cu₂O on TNTAs can significantly improve the electron mobility by reducing the recombination rate of electron-hole pairs, which is beneficial to simultaneously ibuprofen degradation and hydrogen production.

Behaviour of ozone in the hybrid ozonation-coagulation (HOC) process for ibuprofen removal: Reaction selectivity and effects on coagulant hydrolysis

Simultaneous ozonation and coagulation can be realized in one unit in the developed hybrid ozonation-coagulation (HOC) process. To reveal the reaction sequence within the HOC process, the ibuprofen (IBP) removal efficiency of the ozonation only, HOC and HOC-PO₄^3- (inhibition of the reactions between ozone and metal coagulant) processes at pH 5 and different ozone dosages were investigated. The removal efficiency is almost the same for the three processes at a low ozone dosage (4.8 mg/L), and higher removal performance can be achieved by the HOC process with increasing ozone dosage. It can be implied that ozone preferentially reacts with OH^- to generate OH which react with IBP in the HOC process, and subsequently reacts with the surface hydroxyl groups of hydrolysed Al species to enhance OH generation. Moreover, based on the kinetics, X-ray photoelectron spectroscopy (XPS) and Fourier transform infrared spectroscopy (FT-IR) analyses, the synergistic reactions between ozone and the metal coagulants (SOC) started to take effect from ozone dosage of 9.6 mg/L, which further verified that ozone will be involved in the IBP ozonation prior to the SOC reactions. The subsequent SOC reactions also resulted in the increased generation of polymeric Al species and more abundant intermediates in the HOC process.

Kinetic Modeling-Assisted Mechanistic Understanding of the Catalytic Ozonation Process Using Cu-Al Layered Double Hydroxides and Copper Oxide Catalysts

In this study, copper aluminum layered hydroxides (Cu-Al LDHs) and copper oxide (CuO) were utilized as catalysts for heterogeneous catalytic ozonation (HCO). Target compounds oxalate and formate were used with removal by adsorption and oxidation quantified to elucidate the role of the catalyst in contaminant removal. Oxidation of oxalate mostly occurred on the catalyst surface via interaction of surface oxalate complexes with surface-located oxidants. In contrast, the oxidation of formate occurred in the bulk solution as well as on the surface of the catalyst. Measurement of O₃ decay kinetics coupled with fluorescence microscopy image analysis corresponding to 7-hydroxycoumarin formation indicates that while surface hydroxyl groups in Cu-Al LDHs facilitate slow decay of O₃ resulting in the formation of hydroxyl radicals on the surface, CuO rapidly transforms O₃ into surface-located hydroxyl radicals and/or other oxidants. Futile consumption of surface-located oxidants via interaction with the catalyst surface was minimal for Cu-Al-LDHs; however, it becomes significant in the presence of higher CuO dosages. A mechanistic kinetic model has been developed which adequately describes the experimental results obtained and can be used to optimize the process conditions for the application of HCO.

Insights into the electro-hybrid ozonation-coagulation process-Significance of connection configurations and electrode types

The electro-hybrid ozonation-coagulation process (E-HOC) integrates electrocoagulation (EC) and ozonation simultaneously in a single unit. Nevertheless, the performance of the EC process is highly dependent on the polar connection configuration (monopolar vs. bipolar connection) and the type of generated coagulants (single-coagulant vs. dual-coagulants). In this study, the removal efficiency of the E-HOC process with different connection configurations and types of coagulants was assessed. The E-HOC process with bipolar connection (BE-HOC) exhibited higher removal efficiency for wastewater treatment plant (WWTP) effluent organic matter and ibuprofen (IBP) compared with the E-HOC process with monopolar connection (ME-HOC). Furthermore, dual-coagulant generation (released from both Al and Fe electrodes) in the BE-HOC process greatly improved the WWTP effluent organic matter and IBP removal efficiency. Lower energy consumption was observed for the BE-HOC process compared with the ME-HOC process. It was found that ozonation promoted the polymerization reactions during coagulant hydrolyzis in the E-HOC process. Compared with the ME-HOC process, the BE-HOC configuration and dual-coagulant mode further facilitated polymeric hydrolyzed coagulant species formation, thereby improving ozone catalytic and coagulation performance. According to trapping experiments and EPR analysis, •OH formation was enhanced in the BE-HOC process and dual-coagulant mode. In addition, more active reaction sites of generated hydrolyzed coagulant species were observed with bipolar connection and in the dual-coagulant generation mode based on X-ray photoelectron spectroscopy (XPS) analysis.

TiO2@MOF Photocatalyst for the Synergetic Oxidation of Microcystin-LR and Reduction of Cr(VI) in Aqueous Media

The coexistence of pollutants presents a great challenge to the implementation of photocatalysts. In this work, a novel MIL-101(Fe)/TiO2 composite prepared by in situ growth of MIL-101(Fe) on TiO2 was developed for the synergetic oxidation of MC-LR and Cr(VI) reduction. The heterojunction material shows elevated photocatalytic behavior under ultraviolet compared with the unary pollutant system. Furthermore, quenching experiments and electron spin resonance confirm that the enhanced photodegradation behavior is related to the synergistic effect between the photocatalytic reduction and oxidation process, in which MC-LR consumes the holes and Cr(VI) captures electrons, followed by efficient charge separation through the conventional double-transfer mechanism between MIL-101(Fe) and TiO2. This investigation provides a deeper understanding of the construction of MOFs/semiconductor heterojunctions for the pollutants removal in multi-component contaminants system.

Blocking the formation of bromate in γ-Fe-Ti-Al2O3 catalytic ozonation of ibuprofen in bromide-containing water

Iron and titanium doped γ-Al2O3 (γ-Fe-Ti-Al2O3) mesoporous catalysts were synthesized by evaporation-induced self-assembly using glucose as template, and applied to ozonation of ibuprofen in bromide-containing water. X-ray diffraction (XRD), nitrogen adsorption-desorption (BET), X-ray photoelectron spectroscopy (XPS) results showed that iron and titanium successfully doped into the skeleton of γ-Al2O3, uniform distribution, maintain the ordered mesoporous structure of γ-Al2O3, with larger specific surface area. The valence of titanium coexists with Ti4+ and Ti3+, and the valence of iron was Fe3+. Infrared spectra of chemisorbed pyridine (Py-FTIR) results showed that the doped titanium and iron into the framework position of γ-Al2O3 altered the surface acidity of the alumina surface, especially increasing the medium Lewis acid sites, which was conducive to the effective decomposition of ozone into active oxygen species. The γ-Fe-Ti-Al2O3 catalyst (Al/Fe = 25, Al/Ti = 75) enhanced the removal rate of ibuprofen in ozonation of bromide-containing water, and effectively blocked the formation of bromate. After the reaction of 60 min, the removal rate of TOC was increased from 54% of γ-Al2O3/O3 to 86% with γ-Fe-Ti-Al2O3/O3, while the ozonation alone was only 13%. Electron Paramagnetic Resonance (EPR) spectra showed that hydroxyl and superoxide radicals were reactive oxygen species, which was beneficial to the mineralization of organic matter. The capture experiment of Fe2+ ion confirmed that the electronic cycle of Fe2+ ion and Fe3+ ion was beneficial to block the formation of bromated. The addition of ibuprofen and humic acid can enhance the reduction of Fe3+ in the catalytic ozonation of γ-Fe-Ti-Al2O3, which further strengthened the blocking of bromate formation.

Efficient catalytic ozonation of bisphenol A by three-dimensional mesoporous CeOx-loaded SBA-16

Herein, we demonstrated the construction of three-dimensional (3D) cerium oxide (CeO_x)/SBA-16 nanocomposites for efficient removal of bisphenol A (BPA) via a catalytic ozonation, with a high BPA mineralization up to 60.9% in 90 min. On one hand, the CeO_x/SBA-16 mesoporous structured materials presented large surface area and uniform pore distribution, which was conducive to the adsorption of transformation by-products (TBPs) and then, the mass transfer. On the other hand, CeO_x/SBA-16 could enhance the ozone utilization efficiency and meanwhile facilitate the formation of OH, the main reactive oxygen species. Through the exploration of dissoluble organic matters and the identification of the reaction intermediates, two BPA degradation pathways were proposed. This approach reported here will benefit the design and construction of mesoporous structured materials for catalytic elimination of hazards to remediate the environment.

Cation-π induced surface cleavage of organic pollutants with ⋅OH formation from H2O for water treatment

High energy consumption is impedimental for eliminating refractory organic pollutants in water by applying advanced oxidation processes (AOPs). Herein, we develop a novel process for destructing these organics in chemical conjuncted Fe⁰-Fe_yC_z/Fe_x, graphited ZIF-8, and rGO air-saturated aqueous suspension without additional energy. In this process, a strong Fe-π interaction occurs on the composite surface, causing the surface potential energy ∼310.97 to 663.96 kJ/mol. The electrons for the adsorbed group of pollutants are found to delocalize to around the iron species and could be trapped by O₂ in aqueous suspension_, producing ^⋅OH, H, and adsorbed organic cation radicals, which are hydrolyzed or hydrogenated to intermediate. The target pollutants undergo surface cleavage and convert H₂O to ^⋅OH, consuming chemical adsorption energy (∼2.852-9.793 kJ/mol), much lower than that of AOPs. Our findings provide a novel technology for water purification and bring new insights into pollutant oxidation chemistry.

Effective treatment of hospital wastewater with high-concentration diclofenac and ibuprofen using a promising technology based on degradation reaction catalyzed by Fe0 under microwave irradiation

Real hospital wastewater was effectively treated by a promising technology based on degradation reaction catalyzed by Fe⁰ under microwave irradiation in this work. Fe⁰ powders were synthesized and characterized by different techniques, resulting in a single-phase sample with spherical particles. Optimum experimental conditions were determined by a central composite rotatable design combined with a response surface methodology, resulting in 96.8% of chemical oxygen demand reduction and 100% organic carbon removal, after applying MW power of 780 W and Fe⁰ dosage of 0.36 g L^-1 for 60 min. Amongst the several organic compounds identified in the wastewater sample, diclofenac and ibuprofen were present in higher concentrations; therefore, they were set as target pollutants. Both compounds were completely degraded in 35 min of reaction time. Their plausible degradation pathways were investigated and proposed. Overall, the method developed in this work effectively removed high concentrations of pharmaceuticals in hospital wastewater.

Straw biochar enhanced removal of heavy metal by ferrate

This study demonstrated that As(III) was appreciably removed by ferrate in the presence of straw biochar. Removal efficiency of As in ferrate/biochar system was over 91%, increased by 34% compared with ferrate alone ([biochar]₀ = 10 mg/L, [ferrate]₀ = 6 mg/L, [As(III)]₀ = 200 μg/L). In the reaction process, As(III) was oxidized to As(V) mainly by ferrate, while ferrate was reduced into ferric (hydr)oxides and coated on the biochar. Biochar was oxidized in the reaction and its surface area, pore volume and the amount of Lewis acid functional groups were substantially improved, which provided interaction sites for As adsorption. Analysis of hydrodynamic diameter and zeta potential revealed that biochar interacted with the ferrate resulted ferric oxides and enlarged the Fe-C-As particle/floc, which promoted their settlement and thus the liquid-solid separation of As. As(V) was adsorbed on the surface of biochar and ferric (hydr)oxides through hydrogen bond, electrostatic attraction and As-(OFe) bond. Ferrate/biochar was not only effective for As removal, but removed 73.31% of As, 50.38% of Cd, and 75.27% of Tl when these hazardous species synchronously existed in polluted water (initial content: As, 100 μg/L; Cd, 50 μg/L; Tl, 1 μg/L). The combination of ferrate with biochar has potential for the remediation of hazardous species polluted water.

Oxygen-vacancy-mediated LaFe1-xMnxO3-δ perovskite nanocatalysts for degradation of organic pollutants through enhanced surface ozone adsorption and metal doping effects

Here, a series of LaFe_1-xMn_xO_3-δ perovskite nanocatalysts were synthesized and tested for the catalytic ozonation of m-cresol for the first time. The B-site cation is regulated by metal doping, and the resulting LaFe_0.26Mn_0.74O_3-δ with a rhombohedral structure showed excellent catalytic performance and structural stability owing to the abundant oxygen vacancies and the higher Fe²⁺/Fe³⁺ and Mn³⁺/Mn⁴⁺ ratios. Theoretical calculations have revealed that the oxygen vacancy has a strong affinity for ozone adsorption, and thus facilitated ozone decomposition by extending the O-O bond. Combined with low-valence Fe²⁺ and Mn³⁺ cations, the electron transfer in the catalytic ozonation reaction has been enhanced, which has promoted the production of reactive oxygen species (ROS). Taken together, the degradation pathway of m-cresol was proposed. Additionally, the LaFe_0.26Mn_0.74O_3-δ catalyst remained stable during a 60 h reaction. This study has not only revealed the adsorption/decomposition pathways of ozone using LaFe_0.26Mn_0.74O_3-δ perovskite nanocatalysts but also provided indepth insight into the electron transfer pathway on the surface of nanocatalysts during the process of catalytic ozonation.

Bifunctional Fe for Induced Graphitization and Catalytic Ozonation Based on a Fe/N-Doped Carbon-Al2O3 Framework: Theoretical Calculations Guided Catalyst Design and Optimization

Heterogeneous catalytic ozonation is regarded as a feasible technology in advanced wastewater treatment. Catalytic performance, mass transfer, and mechanical strength are the key elements for large-scale applications of catalysts. To optimize those elements, Fe was selected for its dual role in graphitization and catalytic ozonation. A Fe/N-doped micron-scale carbon-Al2O3 framework (CAF) was designed and applied to a fluidized catalytic process for the treatment of secondary effluent from coal gasification. The chemical oxygen demand removal rate constant and the hydroxyl radical generation efficiency (Rct) of the Fe/N-doped CAF were 190% and 429% higher than those of pure ozone, respectively. Theoretical calculations revealed that higher Fe valence promoted ozone decomposition, which implied increasing FeIII content for further catalyst optimization. The rate constant and Rct with a higher FeIII-proportion catalyst were increased by 13% and 16%, respectively, compared to those with the lower one. Molecular dynamics and density functional theory calculations were performed to analyze the reaction kinetics qualitatively and quantitatively. The energy barrier corresponding to FeIII configuration was 1.32 kcal mol-1, 27% lower than that for FeII configuration. These theoretical calculations guided the catalyst optimization and provided a novel solution for designing ozonation catalysts. The Fe/N-doped CAF demonstrated a great potential for practical applications.

Identifying the Persistent Free Radicals (PFRs) Formed as Crucial Metastable Intermediates during Peroxymonosulfate (PMS) Activation by N-Doped Carbonaceous Materials

A nonradical mechanism involved in peroxymonosulfate (PMS) activation in carbonaceous materials (CMs) is still controversial. In this study, we prepared N-doped CMs, including hollow carbon spheres (NHCSs) and carbon nanotubes (N-CNTs), to probe the crucial intermediates during PMS activation. The results suggested that the higher efficiency and lower activation energy (13.72 kJ mol^-1) toward phenol (PN) degradation in an NHCS/PMS system than PMS alone (∼24.07 kJ mol^-1) depended on a typical nonradical reaction. Persistent free radicals (PFRs) with a g factor of 2.0033-2.0045, formed as crucial metastable intermediates on NHCS or N-CNT in the presence of PMS, contribute largely to the organic degradation (∼73.4%). Solid evidence suggested that the formation of PFRs relied on the attack of surface-bonded ^•OH and SO₄^•- or peroxides in PMS, among which surface-bonded SO₄^•- was most thermodynamically favorable based on theoretical calculations. Electron holes within PFRs on NHCSs shifted the Fermi level to the positive energy with the valance band increasing from 1.18 to 1.98 eV, promoting the reactivity toward nucleophilic substances. The degradation intermediates of aromatic compounds (e.g., PN) and electron rearrangement triggered the evolution of PFRs from oxygen-centered to carbon-centered radicals. Moreover, due to the specific electron configuration, graphitic N on NHCS was critical for stabilizing the PFRs. This study provides insightful understanding of the fate of organic contaminants and the structure-activity relationship of reactivity of CMs toward PMS activation.

Natural alumina/silica suspended particles in water to enhance ofloxacin degradation with UVA-H2O2 driven by surface chemistry

UV-H₂O₂ is the most widely used oxidizing system with established effectiveness and a high level of technical development for practical application. However, little attention was paid on the effect of suspended particles in natural water on organic contaminants removal via UV-H₂O₂ technique. In this study, this effect of suspended particles to enhance the contaminant degradation was explored using silica/alumina-based oxides (MCM-41 and Al@MCM-41) as the representative. The results showed that MCM-41 had no effect on OFX degradation compared with UV-H₂O₂. While the degradation efficiency and reaction rate were greatly enhanced at a pH range of 3.0-9.0 especially at acidic pH values (3.0-5.0) in the presence of Al@MCM-41. The probe experiments proved that OFX adsorption followed by surface reaction process played an important role to enhance the performance of UV-H₂O₂. Based on the characterization results, the positive effect of suspended particles was not related to their surface area and pore size distribution, but dependent on the chemical composition and surface acid-base property. The suspended particles can provide an active surface composed of acid and base sites. The base site can create a local basic micro-environment by producing more ^•OH et al. While the dissociated acid sites in Al@MCM-41 with a negative charged surface favor OFX adsorption and then reaction with produced ROS. Our findings suggest that the enhanced performance of UVA-H₂O₂ induced by suspended particles should be concerned.

Efficient catalytic activity and bromate minimization over lattice oxygen-rich MnOOH nanorods in catalytic ozonation of bromide-containing organic pollutants: Lattice oxygen-directed redox cycle and bromate reduction

The inhibition of bromate formation is a challenge for the application of ozonation in water treatment due to the carcinogenicity and nephrotoxicity of bromate. In this study, the high-mobility lattice oxygen-rich MnOOH nanorods were synthesized successfully and applied for the bromate inhibition during catalytic ozonation in bromide and organic pollutants-containing wastewater treatment. The catalytic ozonation system using lattice oxygen-rich MnOOH nanorods exhibited an excellent performance in bromate control with an inhibition efficiency of 54.1% compared with the sole ozonation process. Furthermore, with the coexistence of 4-nitrophenol, the catalytic ozonation process using lattice oxygen-rich MnOOH nanorods could inhibit the bromate formation and boost the degradation of 4-nitrophenol simultaneously. Based on the experiments of ozone decomposition, surface manganese inactivation and reactive oxygen species detection, the inhibition of bromate could be attributed to the effective decomposition of ozone with generating more ·O₂^- and the reduction of bromate into bromide by lattice oxygen-rich MnOOH. The existed surface Mn(IV) on lattice oxygen-rich MnOOH can accept electrons from lattice oxygen and ·O₂^- to generate surface transient Mn(II)/Mn(III), in which Mn(II)/Mn(III) can promote the reduction of bromate into bromide during catalytic ozonation. This study provides a promising strategy for the development of bromate-controlling technologies in water treatment.

Efficient degradation of clofibric acid by heterogeneous catalytic ozonation using CoFe2O4 catalyst in water

CoFe₂O₄ (Cobalt ferrite, CF) nanoparticles were prepared, well characterized and applied as efficient solid catalyst in catalytic ozonation, named CF/O₃ process, for the removal of emerging organic contaminants (EOCs). The degradation and mineralization of clofibric acid (CA) in CF/O₃ process were dramatically enhanced in comparison with those under the O₃ system. Surface hydroxyl groups (HGs) were considered as an important factor for ozone decomposition and the reactive oxygen species (ROS) on the catalyst surface were mainly responsible for CA elimination. The contribution and formation of ROS, including hydroxyl radicals (^•OH), especially superoxide radicals (O₂^•-), singlet oxygen (¹O₂), and hydrogen peroxide (H₂O₂) were evaluated, and a rational mechanism was elucidated accordingly. Probable degradation pathway of CA was proposed according to the organic intermediates identified. The acute toxicity of the treated solution increased during the first 15 min and then declined rapidly and nearly disappeared as the reaction proceeded. In addition, acceptable catalytic performance of CF/O₃ can be obtained for the treatment of other EOCs and the treatment of natural surface water spiked with CA. This work presents an efficient and promising catalytic ozonation technique for the elimination of EOCs in complex water matrices.

Enhanced Fenton-like efficiency by the synergistic effect of oxygen vacancies and organics adsorption on FexOy-d-g-C3N4 with Fe‒N complexation

d-g-C₃N₄-Fe composites was prepared via a self-assembly and calcination process. According to measurements and density functional theory (DFT) computations, the complexation of iron and pyridinic N of g-C₃N₄ (Fe‒N) occurred with Fe(III)-π interaction, causing more oxygen vacancies (OVs) with more electrons in iron oxides. In the catalyst air-saturated suspension, the adsorbed pollutants complexed surface Fe(III) through their hydroxyl group donated electrons to around OVs, reducing the surface Fe(III) to Fe(II) and were destructed by Fe(III)-π interaction of the complexation. The addition of H₂O₂ mainly acted as acceptor being reduced ^•OH at the OV centers, causing higher degradation rate of pollutants due to both ^•OH and the surface reaction. However, for the adsorbed hydrophobic pollutants onto the sites of peripheral structure in g-C₃N₄, H₂O₂ was mainly decomposed into O₂ by the synergistic effect of iron species and OVs. Therefore, the catalyst exhibited high Fenton-like efficiency for the degradation of hydroxyl-containing pollutants and hydrophobic pollutants mixing with the former. Our results demonstrate that the Fe(III)-π interaction could carry out the oxidation of pollutants on the catalyst surface, decreasing the consumption of H₂O₂, and the role of OVs depends on pollutant adsorption patterns.

Heterogeneous catalytic ozonation of atrazine with Mn-loaded and Fe-loaded biochar

After reaction with permanganate or ferrate, the resulted Mn-loaded and Fe-loaded biochar (MnOx/biochar and FeOx/biochar) exhibited excellent catalytic ozonation activity. O₃ (2.5 mg/L) eliminated 48% of atrazine (ATZ, 5 μM) within 30 min at pH 7.0, while under identical conditions, ozonation efficiency of ATZ increased to 83% and 100% in MnOx/biochar and FeOx/biochar (20 mg/L) heterogeneous catalytic systems, respectively. Radical scavenger experiment and electron paramagnetic resonance (EPR) analysis confirmed that hydroxyl radical (•OH) was the dominant oxidant. Total Lewis acid sites on MnOx/biochar and FeOx/biochar were 3.5 and 4.1 times of that on the raw biochar, which induced enhanced adsorption of O₃ and its subsequent decomposition into •OH. Electron transfer via redox pairs on MnOx/biochar and FeOx/biochar was observed by cyclic voltammetry scans, which also functioned in the improved catalytic capacity. Degradation pathways of ATZ in MnOx/biochar and FeOx/biochar ozonation systems were proposed, with 34.6% and 44.8% of dechlorination effect accomplished within 30 min of reaction, which was improved by 4.1 and 5.3 times compared to pure ozonation. After 12-hour treatment, acute toxicity of ATZ oxidation products was reduced from 38.3% of pure ozonation system to 14.5% and 6.3% of activated ozonation systems with MnOx/biochar and FeOx/biochar, respectively. Mn-loaded biochar and Fe-loaded biochar have great potential for heterogeneous catalytic ozonation of polluted water.

More octahedral Cu+ and surface acid sites in uniformly porous Cu-Al2O3 for enhanced Fenton catalytic performances

Porous Cu-doped alumina (P-Cu-Al₂O₃) has been synthesized using ammonium chloride as a green gaseous template. The unique pore-forming agent endows the catalyst a large surface area and homogenous pore structure. According to the characterization results by multi-technologies, the highly dispersed framework Cu⁺/Cu²⁺ was incorporated in octahedral sites with the formation of the Cu-O-Al bonds. Compared with bulk Cu-doped Al₂O₃ (B-Cu-Al₂O₃), more surface acidic oxygen-containing groups and Lewis acid sites existed in P-Cu-Al₂O₃, resulting in the production of surface adsorbed ^•OH, which is helpful for the removal of surface adsorbed organic intermediates. In addition, O₂ more easily participate in surface reaction to promote the ^•OH generation in P-Cu-Al₂O₃ system than that in B-Cu-Al₂O₃. As a result, the representative endocrine disruptor bisphenol A can be more efficiently mineralized by P-Cu-Al₂O₃. This work provides a facile route to develop porous active heterogenous Fenton-like catalysts and a unique perspective to insight into the structure-activity relationship.

Synergistically enhanced heterogeneous activation of persulfate for aqueous carbamazepine degradation using Fe3O4@SBA-15

The exploration of low-cost, high-performance and stable catalytic materials for sulfate radical-based advanced oxidation processes (SR-AOPs) is of great importance. This study presents Fe₃O₄-wrapped SBA-15 mesoporous silica catalyst (Fe₃O₄@SBA-15) for persulfate (PS) activation. The Fe₃O₄@SBA-15 with an Fe₃O₄ to SBA-15 weight ratio of 3:1 exhibited an impressive carbamazepine (CBZ) removal efficiency of ~100% after 30 min of SR-AOP at an initial pH of 3.0, a temperature of 25 °C, an initial PS concentration of 300 mg L^-1 and a catalyst concentration of 0.50 g L^-1. The primary oxidizing species produced in the system were identified as SO₄^- and HO by electron paramagnetic resonance spectra and radical quenching experiments. Benefiting from the synergetic effects of improved Fe₃O₄ dispersion and enhanced adsorption of CBZ and PS by SBA-15, the as-obtained heterogeneous Fe₃O₄@SBA-15 catalysts offer large numbers of active sites for free radical generation and high surface concentrations of CBZ and PS for SR-AOPs, as verified by physicochemical characterization and Langmuir-Hinshelwood model analysis. In addition, the activity of Fe₃O₄@SBA-15 was maintained throughout six successive cycling tests. Various inorganic anions, including Cl^-, NO₃^-, HCO₃^-, and CO₃^2-, as well as organic material in natural water, exert a negative impact on the Fe₃O₄@SBA-15 catalyzed SR-AOPs and deserve special attention.

Regeneration of [Bmim]BF4 ionic liquid by ozonation: hydrogen bond roles, synergistic effect, and DFT calculation

Ionic liquids (ILs) are a kind of promising extractants for removing undesirable organics from industrial wastewater and crude oil, etc. Herein, IL regeneration by ozonation was proposed for its recycling. 1-Butyl-3-methylimidazolium tetrafluoroborate ([Bmim]BF₄) and phenol were used as the representative IL and organic matter, respectively. The regeneration performance, stability of [Bmim]BF₄, and roles of hydrogen bonds between O₃ and [Bmim]BF₄ in the phenol removal were studied. The experimental results showed that 90.2% of phenol was degraded in [Bmim]BF₄ after ozonation treatment for 30 min with the O₃ concentration of 1.2 mg/L. The nonvolatility of [Bmim]BF₄-made phenol was adequately degraded, while the concentration of phenol increased during ozone treatment in the conventional extractants (ethanol, ethyl acetate, and dichloromethane) due to their high volatility. The reuse experiments, spectra of Fourier transform infrared spectroscopy and ¹H nuclear magnetic resonance spectroscopy indicated that [Bmim]BF₄ was steady under the ozonation process. Density functional theory simulation confirmed that hydrogen bonds between [Bmim]⁺ and O₃ could be formed, and calculational results of Hirshfeld charges indicated that the nucleophilicity of O₃ was enhanced by the hydrogen bonds. The enhanced nucleophilicity resulted in the increase of phenol degradation efficiency by ozonation, and the synergistic effect between O₃ and ILs was proportional to the hydrogen bond donor ability of ILs.

A novel highly dispersed tetra-metal nano heterogeneous ozone catalyst derived from microbial adsorption and in situ pyrolysis

In recent years, the pyrolysis of microbial biomasses that adsorb various metal ions has enabled the preparation of carbon-based polymetallic nanomaterials with excellent electrocatalytic and electrical energy storage properties. However, the preparation of ozone catalysts by this technique and the corresponding catalytic oxidation mechanism are still unclear. In this study, an Escherichia coli strain (BL21) was used for tetra-metal (Cu, Fe, Mn and Al) absorption and the obtained microbial biomass was pyrolyzed under the protection of a nitrogen flow at 700 °C and activated at 900 °C to prepare a microbial-char-based tetra-metal ozone catalyst (MCOC). This was used to degrade phenol and coking wastewater and exhibited a strong catalytic capability for coking wastewater, whose chemical oxygen demand removal efficiency of 70.86% is 16.7% higher than that of pure ozone and 14.67%, 7.21% and 3.58% higher than that of three commercial catalysts, respectively. It also improved the efficiency of ozonation for phenol by 33%. The MCOC was characterized by x-ray diffraction, x-ray photoelectron spectroscopy, scanning electron microscopy-energy-dispersive spectroscopy, transmission electron microscopy and other methods. The results demonstrated that the spherical metal nanoparticles had sizes ranging from 3 nm to 7 nm and that crystals of Fe₂O₃ and Fe₃P were observed. The study showed that the MCOC promoted the production of more hydroxyl radicals and superoxides from ozone, which attack organics. The oxygen vacancies of the catalyst were also investigated. It was proved that the Lewis acid sites on the surface of metal oxides are the active centers of ozone decomposition. Therefore, this work provides a new method for the synthesis of multi-metal nanocomposites and expands the application of biosynthetic nanomaterials.

Catalytic ozonation of norfloxacin using Co3O4/C composite derived from ZIF-67 as catalyst

In this study, Co₃O₄-carbon composite was synthesized by calcined metal organic framework (MOF) ZIF-67 and used as efficient catalysts for ozonation of norfloxacin (NOF). The MOF-derived Co₃O₄-C composite remained similar polyhedrons structure of ZIF-67, suggesting that Co₃O₄ was well-dispersed in Co₃O₄-C composite. Furthermore, a larger amount of surface carbon-oxygen functional groups were distributed on Co₃O₄-C composite, which resulted in the diversification of active sites for catalytic ozonation reaction. NOF degradation and mineralization could be effectively enhanced in Co₃O₄-C/O₃ process. Moreover, NOF mineralization by catalytic ozonation strongly depended on the solution pH, while other operational conditions, such as O₃ concentration and catalyst dosage had not obvious influence on it. Co₃O₄-C composite could significantly accelerate O₃ decomposition to produce active free radicals (such as •OH), which enhanced the mineralization of NOF. The possible catalytic mechanism of Co₃O₄-C composite was proposed. Additionally, after five consecutive use of Co₃O₄-C composite in catalytic ozonation process, there was no obvious decrease in TOC removal efficiency, indicating a stable performance of Co₃O₄-C composite, which was suitable for the catalytic ozonation for wastewater treatment.

Catalytic ozonation of iohexol with α-Fe0.9Mn0.1OOH in water: Efficiency, degradation mechanism and toxicity evaluation

Iohexol, a widely used iodinated X-ray contrast media, is difficult to completely degrade with the traditional water treatment process. Catalytic ozonation with synthesized α-Fe_0.9Mn_0.1OOH as the catalyst can significantly promote the degradation of iohexol relative to that with ozonation alone. Hydroxyl radicals play a predominant role during the degradation of iohexol. The effect of various factors, including catalyst dose, ozone dose, iohexol concentration and water matrix factors, on the catalytic performance were investigated. The presence of α-Fe_0.9Mn_0.1OOH in the catalytic system can significantly promote the removal of iohexol and mineralization of the dissolved organic carbon in real water samples. The intermediate products were determined by high-resolution liquid chromatography, and the reaction site was predicted by frontier electron density (FED) calculations. The degradation mechanism of iohexol followed the processes of H-abstraction, amide hydrolysis, amide oxidation, and ·OH substitution. Higher exposure concentrations of iohexol had a negative effect on the survival and hatching rates in the development of zebrafish embryos. The autonomic movement process and heartbeat rate of the zebrafish larvae showed significant differences as the exposure concentration of iohexol increased. The catalytic ozonation process with α-Fe_0.9Mn_0.1OOH can decrease the toxicity of iohexol containing water.

Sintering- and oxidation-resistant ultrasmall Cu(I)/(II) oxides supported on defect-rich mesoporous alumina microspheres boosting catalytic ozonation

Supported copper oxides with well-dispersed metal species, small size, tunable valence and high stability are highly desirable in catalysis. Herein, novel copper oxide (CuO_x) catalysts supported on defect-rich mesoporous alumina microspheres are developed using a spray-drying-assisted evaporation induced self-assembly method. The catalysts possess a special structure composed of a mesoporous outer layer, a mesoporous-nanosphere-stacked under layer and a hollow cavity. Because of this special structure and the defective nature of the alumina support, the CuO_x catalysts are ultrasmall in size (1 ~ 3 nm), bivalent with a very high Cu⁺/Cu²⁺ ratio (0.7), and highly stable against sintering and oxidation at high temperatures (up to 800 °C), while the wet impregnation method results in CuO_x catalysts with much larger sizes (~15 nm) and lower the Cu⁺/Cu²⁺ ratios (~0.29). The catalyst formation mechanism through the spray drying method is proposed and discussed. The catalysts show remarkable performance in catalytic ozonation of phenol wastewaters. With high-concentration phenol (250 ppm) as the model organic pollutant, the optimized catalyst delivers promising catalytic performance with 100% phenol removal and 53% TOC removal in 60 min, and a high cyclic stability. Superoxide anion free radicals (⋅O₂^-), singlet oxygen (¹O₂) and hydroxyl radicals (⋅OH) are the predominant reactive species. A detailed structure-performance study reveals the surface hydroxyl groups and Cu⁺/Cu²⁺ redox couples play cooperatively to accelerate O₃ decomposition generating reactive radicals. The plausible catalytic O₃ decomposition mechanism is proposed and discussed with supportive evidences.

Catalytic ozonation of bio-treated coking wastewater in continuous pilot- and full-scale system: Efficiency, catalyst deactivation and in-situ regeneration

In this study, the performance of catalytic ozonation in the treatment of bio-treated coking wastewater (BCW) using pilot- and full-scale systems was investigated. Additionally, the removal efficiency of organic pollutants from BCW, the deactivation mechanism of Mn_xCe_1-xO₂/γ-Al₂O₃, and backflushing optimization for in-situ catalyst regeneration, which have not been previously investigated, were analysed. Results of the 12-month pilot scale experiments showed that catalytic ozonation resulted in the effective removal of organic pollutants when backflushing was applied as an in-situ catalyst regeneration strategy. The effluent chemical oxygen demand (COD) content decreased from 150 to 78 mg L^-1, and remained below a discharge limitation of 80 mg L^-1, and the stable COD removal efficiencies (from 56.0% to 47.9%) indicated that catalyst deactivation, which primarily resulted from the deposition of inorganic salts on the surface of the catalyst that limited interaction between ozone and active sites and/or prevented electrons transfer, was primarily inhibited by backflushing. The catalyst regeneration via in-situ air- and water-backflushing was attributed to the scrubbing, collision, and/or the loosing effect. Additionally, in the full-scale experiment, the catalytic ozonation process with in-situ alternative backflushing exhibited a stable COD removal efficiency (above 45.6%) for 885 days when water- and air-flushing strengths of 10 L m^-2 s^-1 and 15 L m^-2 s^-1, respectively, were applied with a 7-day regeneration interval. Therefore, the results of this study provide new insights into catalytic ozonation and support its engineering application in BCW treatment.

Towards a comparison between the hybrid ozonation-coagulation (HOC) process using Al- and Fe-based coagulants: Performance and mechanism

In this study, the removal performance of a hybrid ozonation-coagulation (HOC) process using AlCl₃6H₂O (Al-HOC) and FeCl₃6H₂O (Fe-HOC) as coagulants for the treatment of wastewater treatment plant (WWTP) effluent and ibuprofen (IBP) was investigated. Compared with the conventional coagulation process and pre-ozonation-coagulation process, much better organic matter removal performance can be achieved for both the Al-HOC and Fe-HOC processes. The Fe-HOC process showed an obviously higher dissolved organic carbon (DOC) removal efficiency than that of the Al-HOC process. Surface hydroxyl groups were determined to be the active sites in generating OH in the HOC process, and the hydrolysed Fe species possessed a higher content of surface hydroxyl groups than the hydrolysed Al species according to fourier transform infrared spectroscopy (FT-IR) and X-ray photoelectron spectra (XPS) analyses. In addition, the hydrolysed Fe species contained a higher portion of tetrahedral sites that were more likely to be stronger Lewis acid sites to react with ozone to generate OH. Furthermore, peroxone reactions in the HOC process were other possible way to enhance the OH generation, and higher H₂O₂ generation was observed in the Fe-HOC process due to higher O₂^- generation. Therefore, better removal performance of the Fe-HOC process can be obtained due to the increased OH generation in the Fe-HOC process.

Photodegradation of ibuprofen and four other pharmaceutical pollutants on natural pigments sensitized TiO2 nanoparticles

Pharmaceuticals and personal care products (PPCPs) in water system have drawn increasing concerns in recent years. TiO₂ -based photodegradation has shown great potential as a low-cost and sustainable technology in water treatment, however, can only use the UV light range of solar radiation which makes the system less efficient. Dyes have been studied to improve the TiO₂ system light-harvesting range, but studies on environmental friendly natural dyes are rare. In this study, a screening method using UV-Vis spectra analysis was carried out on a group of 22 different tropical natural plants for the potential applications on dye-sensitized TiO₂ in PPCP treatment. As a result, Begonia "Martin's Mystery" significantly increased TiO₂ photodegradation efficiency toward ibuprofen treatments which is first time reported in literature as our best knowledge. Moreover, the promising discovery of Begonia application in ibuprofen treatment has been successfully applied to warfarin and famotidine treatment. Similar results were expanded to many other Begonia species which indicate that Begonia extracts could be excellent sensitizers for TiO₂ -based photodegradation of PPCPs. Our discovery suggested that the screening process may potentially open a brand-new way for future TiO₂ photodegradation studies before the complex and time-consuming detailed mechanism studies. PRACTITIONER POINTS.: Natural dyes were screened as sensitizers for TiO₂ photodegradation of ibuprofen. Ibuprofen photodegradation efficiency was increased twice using Begonia "Martin's Mystery." The Begonia applications were extended to warfarin, trimethoprim, and famotidine. Promising results were also observed using five other Begonia species.

Enhanced Hydrolysis of p-Nitrophenyl Phosphate by Iron (Hydr)oxide Nanoparticles: Roles of Exposed Facets

Iron (hydr)oxide nanoparticles are one of the most abundant classes of naturally occurring nanoparticles and are widely used engineered nanomaterials. In the environment these nanoparticles may significantly affect contaminant fate. Using two goethite materials with different contents of exposed {021} facet and two hematite materials with predominantly exposed {001} and {100} facets, respectively, we show that exposed facets, one of the most intrinsic properties of nanocrystals, significantly affect the efficiency of iron (hydr)oxide nanoparticles in catalyzing acid-promoted hydrolysis of 4-nitrophenyl phosphate (pNPP, selected as a model organophosphorus pollutant). Attenuated total reflectance Fourier-transform infrared spectroscopy analysis and density functional theory calculations indicate that the pNPP hydrolysis reaction on the iron (hydr)oxide surface involves the inner-sphere complexation between the phosphonate moiety of pNPP and the surface ferric iron (Fe(III)), through ligand exchange with primarily the singly coordinated surface hydroxyl groups of iron (hydr)oxides. Both the abundance and affinity of these adsorption sites are facet-dependent. Exposed facets also determine the reaction kinetics of surface-bound pNPP mainly by regulating the Lewis acidity of the surface Fe(III) atoms. These findings underline the important roles of facets in determining the reactivity of naturally occurring metal-based nanoparticles toward environmental contaminants and may shed light on the development of nanomaterial-based remediation strategies.