Transition-metal ions in zeolites: coordination and activation of oxygen

Cu-CHA – a model system for applied selective redox catalysis

We review the structural chemistry and reactivity of copper-exchanged molecular sieves with chabazite (CHA) topology, as an industrially applied catalyst in ammonia mediated reduction of harmful nitrogen oxides (NH₃-SCR) and as a general model system for red-ox active materials (also the recent results in the direct conversion of methane to methanol are considered).

Alkane Oxidation: Methane Monooxygenases, Related Enzymes, and Their Biomimetics

Methane monooxygenases (MMOs) mediate the facile conversion of methane into methanol in methanotrophic bacteria with high efficiency under ambient conditions. Because the selective oxidation of methane is extremely challenging, there is considerable interest in understanding how these enzymes carry out this difficult chemistry. The impetus of these efforts is to learn from the microbes to develop a biomimetic catalyst to accomplish the same chemical transformation. Here, we review the progress made over the past two to three decades toward delineating the structures and functions of the catalytic sites in two MMOs: soluble methane monooxygenase (sMMO) and particulate methane monooxygenase (pMMO). sMMO is a water-soluble three-component protein complex consisting of a hydroxylase with a nonheme diiron catalytic site; pMMO is a membrane-bound metalloenzyme with a unique tricopper cluster as the site of hydroxylation. The metal cluster in each of these MMOs harnesses O₂ to functionalize the C-H bond using different chemistry. We highlight some of the common basic principles that they share. Finally, the development of functional models of the catalytic sites of MMOs is described. These efforts have culminated in the first successful biomimetic catalyst capable of efficient methane oxidation without overoxidation at room temperature.

Redistribution of iron ions in porous ferrisilicates during redox treatments

Relocation of iron ions in microporous Fe-FER, (Al+Fe)-FER, Fe-MFI (FER: ferrierite, MFI: silicalite) and in mesoporous Fe-MCM-41 ferrisilicate (MCM: Mobile Crystalline Material) samples was followed during redox treatments primarily by tool of the in situ Mössbauer spectroscopy. Coexistence of various Fe3+ and Fe2+ species is demonstrated. In microporous Fe-FER and Fe-MFI existence of combined μ-oxo iron dimers, Fe3+ FW-O-Fe2+ EFW can be proposed. The presence of these dimers can easily be correlated with catalytic effect shown in certain oxidation processes. Structural rearrangement can also be revealed in mesoporous Fe-MCM-41 which result in improvement of catalytic performance in CO oxidation.

The active site of low-temperature methane hydroxylation in iron-containing zeolites

An efficient catalytic process for converting methane into methanol could have far-reaching economic implications. Iron-containing zeolites (microporous aluminosilicate minerals) are noteworthy in this regard, having an outstanding ability to hydroxylate methane rapidly at room temperature to form methanol. Reactivity occurs at an extra-lattice active site called α-Fe(ii), which is activated by nitrous oxide to form the reactive intermediate α-O; however, despite nearly three decades of research, the nature of the active site and the factors determining its exceptional reactivity are unclear. The main difficulty is that the reactive species-α-Fe(ii) and α-O-are challenging to probe spectroscopically: data from bulk techniques such as X-ray absorption spectroscopy and magnetic susceptibility are complicated by contributions from inactive 'spectator' iron. Here we show that a site-selective spectroscopic method regularly used in bioinorganic chemistry can overcome this problem. Magnetic circular dichroism reveals α-Fe(ii) to be a mononuclear, high-spin, square planar Fe(ii) site, while the reactive intermediate, α-O, is a mononuclear, high-spin Fe(iv)=O species, whose exceptional reactivity derives from a constrained coordination geometry enforced by the zeolite lattice. These findings illustrate the value of our approach to exploring active sites in heterogeneous systems. The results also suggest that using matrix constraints to activate metal sites for function-producing what is known in the context of metalloenzymes as an 'entatic' state-might be a useful way to tune the activity of heterogeneous catalysts.

Synthesis and thermodynamic study of transition metal ion (Mn²⁺, Co²⁺, Cu²⁺, and Zn²⁺) exchanged zeolites A and Y

Transition metal cations (Mn(2+), Co(2+), Cu(2+), and Zn(2+)) containing zeolites A and Y were synthesized by ion exchange and their thermochemistry was investigated by differential scanning calorimetry and high temperature oxide melt solution calorimetry. The enthalpies of formation from oxides for Mn, Co, Cu, and Zn zeolites A range from 14.0 ± 1.3 to 67.6 ± 5.5 kJ mol(-1) and those for Mn, Co, Cu, and Zn zeolites Y range from 8.0 ± 2.0 to 32.6 ± 1.8 kJ mol(-1). All these zeolites are thus metastable with respect to oxide components and to other dense phases. The formation enthalpies of Mn and Zn exchanged zeolites A and Y are less endothermic than those of corresponding Co and Cu exchanged A and Y. These energetics are consistent with metal oxygen bond lengths and related to crystal field effects of transition metal ions. Similar thermodynamic trends have been seen in transition metal containing spinel, olivine and pyroxene materials. The enthalpies of exchange of transition metals in zeolites A and Y with sodium in aqueous solution are calculated and suggest that these zeolites could be reasonably effective sorbents for heavy metal waste.

Improved Efficiency for Partial Oxidation of Methane by Controlled Copper Deposition on Surface-Modified ZSM-5

The mono(μ‐oxo) dicopper cores present in the pores of Cu‐ZSM‐5 are active for the partial oxidation of methane to methanol. However, copper on the external surface reduces the ratio of active, selective sites to unselective sites. More efficient catalysts are obtained by controlling the copper deposition during synthesis. Herein, the external exchange sites of ZSM‐5 samples were passivated by bis(trimethylsilyl) trifluoroacetamide (BSTFA) followed by calcination, promoting selective deposition of intraporous copper during aqueous copper ion exchange. At an optimum level of 1–2 wt % SiO₂, IR studies showed a 64 % relative reduction in external copper species and temperature‐programmed oxidation analysis showed an associated increase in the formation of methanol compared with unmodified Cu‐ZSM‐5 samples. It is, therefore, reported that the modified zeolites contained a significantly higher proportion of active, selective copper species than their unmodified counterparts with activity for partial methane oxidation to methanol.

Single-site trinuclear copper oxygen clusters in mordenite for selective conversion of methane to methanol

Copper-exchanged zeolites with mordenite structure mimic the nuclearity and reactivity of active sites in particulate methane monooxygenase, which are enzymes able to selectively oxidize methane to methanol. Here we show that the mordenite micropores provide a perfect confined environment for the highly selective stabilization of trinuclear copper-oxo clusters that exhibit a high reactivity towards activation of carbon–hydrogen bonds in methane and its subsequent transformation to methanol. The similarity with the enzymatic systems is also implied from the similarity of the reversible rearrangements of the trinuclear clusters occurring during the selective transformations of methane along the reaction path towards methanol, in both the enzyme system and copper-exchanged mordenite.

Copper-exchanged zeolites with mordenite structure can mimic the active sites in particulate methane monooxygenase. Here, the authors show that mordenite micropores can stabilize trinuclear copper-oxo clusters that exhibit a high reactivity towards activation of carbon–hydrogen bonds in methane.

Self-catalysed aerobic oxidization of organic linker in porous crystal for on-demand regulation of sorption behaviours

Control over the structure and property of synthetic materials is crucial for practical applications. Here we report a facile, green and controllable solid-gas reaction strategy for on-demand modification of porous coordination polymer. Copper(I) and a methylene-bridged bis-triazolate ligand are combined to construct a porous crystal consisting of both enzyme-like O2-activation site and oxidizable organic substrate. Thermogravimetry, single-crystal X-ray diffraction, electron paramagnetic resonance and infrared spectroscopy showed that the methylene groups can be oxidized by O2/air even at room temperature via formation of the highly active Cu(II)-O2(˙-) intermediate, to form carbonyl groups with enhance rigidity and polarity, without destroying the copper(I) triazolate framework. Since the oxidation degree or reaction progress can be easily monitored by the change of sample weight, gas sorption property of the crystal can be continuously and drastically (up to 4 orders of magnitude) tuned to give very high and even invertible selectivity for CO2, CH4 and C2H6.

Catalytic effect of transition metals on microwave-induced degradation of atrazine in mineral micropores

With their high catalytic activity for redox reactions, transition metal ions (Cu(2+) and Fe(3+)) were exchanged into the micropores of dealuminated Y zeolites to prepare effective microporous mineral sorbents for sorption and microwave-induced degradation of atrazine. Due to its ability to complex with atrazine, loading of copper greatly increased the sorption of atrazine. Atrazine sorption on iron-exchanged zeolites was also significantly enhanced, which was attributed to the hydrolysis of Fe(3+) polycations in mineral micropores and electrostatic interactions of protonated atrazine molecules with the negatively charged pore wall surface. Copper and iron species in the micropores also significantly accelerated degradation of the sorbed atrazine (and its degradation intermediates) under microwave irradiation. The catalytic effect was attributed to the easy reducibility and high oxidation activity of Cu(2+) and Fe(3+) species stabilized in the micropores of the zeolites. It was postulated that the surface species of transition metals (monomeric Cu(2+), Cu(2+)-O-Cu(2+) complexes, FeO(+), and dinuclear Fe-O-Fe-like species) in the mineral micropores were thermally activated under microwave irradiation, and subsequently formed highly reactive sites catalyzing oxidative degradation of atrazine. The transition metal-exchanged zeolites, particularly the iron-exchanged ones, were relatively stable when leached under acidic conditions, which suggests that they are reusable in sorption and microwave-induced degradation. These findings offer valuable insights on designing of effective mineral sorbents that can selectively uptake atrazine from aqueous solutions and catalyze its degradation under microwave irradiation.

[Cu2O]2+ active site formation in Cu-ZSM-5: geometric and electronic structure requirements for N2O activation

Understanding the formation mechanism of the [Cu2O](2+) active site in Cu-ZSM-5 is important for the design of efficient catalysts to selectively convert methane to methanol and related value-added chemicals and for N2O decomposition. Spectroscopically validated DFT calculations are used here to evaluate the thermodynamic and kinetic requirements for formation of [Cu2O](2+) active sites from the reaction between binuclear Cu(I) sites and N2O in the 10-membered rings Cu-ZSM-5. Thermodynamically, the most stable Cu(I) center prefers bidentate coordination with a close to linear bite angle. This binuclear Cu(I) site reacts with N2O to generate the experimentally observed [Cu2O](2+) site. Kinetically, the reaction coordinate was evaluated for two representative binuclear Cu(I) sites. When the Cu-Cu distance is sufficiently short (<4.2 Å), N2O can bind in a "bridged" μ-1,1-O fashion and the oxo-transfer reaction is calculated to proceed with a low activation energy barrier (2 kcal/mol). This is in good agreement with the experimental Ea for N2O activation (2.5 ± 0.5 kcal/mol). However, when the Cu-Cu distance is long (>5.0 Å), N2O binds in a "terminal" η(1)-O fashion to a single Cu(I) site of the dimer and the resulting E(a) for N2O activation is significantly higher (16 kcal/mol). Therefore, bridging N2O between two Cu(I) centers is necessary for its efficient two-electron activation in [Cu2O](2+) active site formation. In nature, this N2O reduction reaction is catalyzed by a tetranuclear CuZ cluster that has a higher E(a). The lower E(a) for Cu-ZSM-5 is attributed to the larger thermodynamic driving force resulting from formation of strong Cu(II)-oxo bonds in the ZSM-5 framework.

Light alkane oxidation using catalysts prepared by chemical vapour impregnation: tuning alcohol selectivity through catalyst pre-treatment

Heat treating Fe/ZSM-5 under hydrogen leads to high dispersion of Fe species and higher alcohol selectivity in the oxidation of alkanes, as compared to oxygen treated catalysts.

Partial oxidation of ethane to oxygenates using Fe- and Cu-containing ZSM-5

Iron and copper containing ZSM-5 catalysts are effective for the partial oxidation of ethane with hydrogen peroxide giving combined oxygenate selectivities and productivities of up to 95.2% and 65 mol kgcat(-1) h(-1), respectively. High conversion of ethane (ca. 56%) to acetic acid (ca. 70% selectivity) can be observed. Detailed studies of this catalytic system reveal a complex reaction network in which the oxidation of ethane gives a range of C2 oxygenates, with sequential C-C bond cleavage generating C1 products. We demonstrate that ethene is also formed and can be subsequently oxidized. Ethanol can be directly produced from ethane, and does not originate from the decomposition of its corresponding alkylperoxy species, ethyl hydroperoxide. In contrast to our previously proposed mechanism for methane oxidation over similar zeolite catalysts, the mechanism of ethane oxidation involves carbon-based radicals, which lead to the high conversions we observe.

Low temperature oxidation of linseed oil: a review

This review analyses and summarises the previous investigations on the oxidation of linseed oil and the self-heating of cotton and other materials impregnated with the oil. It discusses the composition and chemical structure of linseed oil, including its drying properties. The review describes several experimental methods used to test the propensity of the oil to induce spontaneous heating and ignition of lignocellulosic materials soaked with the oil. It covers the thermal ignition of the lignocellulosic substrates impregnated with the oil and it critically evaluates the analytical methods applied to investigate the oxidation reactions of linseed oil.

Initiation of radical chains by singlet oxygen (1Δg), and their propagation underpin the mechanism of oxidation of linseed oil, leading to the self-heating and formation of volatile organic species and higher molecular weight compounds. The review also discusses the role of metal complexes of cobalt, iron and manganese in catalysing the oxidative drying of linseed oil, summarising some kinetic parameters such as the rate constants of the peroxidation reactions.

With respect to fire safety, the classical theory of self-ignition does not account for radical and catalytic reactions and appears to offer limited insights into the autoignition of lignocellulosic materials soaked with linseed oil. New theoretical and numerical treatments of oxidation of such materials need to be developed. The self-ignition induced by linseed oil is predicated on the presence of both a metal catalyst and a lignocellulosic substrate, and the absence of any prior thermal treatment of the oil, which destroys both peroxy radicals and singlet O2 sensitisers. An overview of peroxyl chemistry included in the article will be useful to those working in areas of fire science, paint drying, indoor air quality, biofuels and lipid oxidation.

Oxidative methane upgrading

The economically viable oxidative upgrading of methane presents one of the most difficult but rewarding challenges within catalysis research. Its potential to revolutionalise the chemical value chain, coupled with the associated supremely challenging scientific aspects, has ensured this topic's high popularity over the preceeding decades. Herein, we report a non-exhaustive account of the current developments within the field of oxidative methane upgrading and summarise the pertaining challenges that have yet to be solved.

Structure and properties of metal-exchanged zeolites studied using gradient-corrected and hybrid functionals. I. Structure and energetics

The structural and energetic properties of purely siliceous, proton-, and Cu- and Co-exchanged chabazite have been studied using periodic density-functional (DFT) calculations with both conventional gradient-corrected exchange-correlation functionals and hybrid functionals mixing exact (i.e., Hartree-Fock) and DFT exchange. Spin-polarized and fixed-moment calculations have been performed to determine the equilibrium and excited spin-configurations of the metal-exchanged chabazites. For the purely siliceous chabazite, hybrid functionals predict a slightly more accurate cell volume and lattice geometry. For isolated Al/Si substitution sites, gradient-corrected functionals predict that the lattice distortion induced by the substitution preserves the local tetrahedral symmetry, whereas hybrid functionals lead to a distorted Al coordination with two short and two long Al-O bonds. Hybrid functionals yield a stronger cation-framework binding that conventional functionals in metal-exchanged zeolites, they favor shorter cation-oxygen bonds and eventually also a higher coordination of the cation. Both types of functionals predict the same spin in the ground-state. The structural optimization of the excited spin-states shows that the formation of a high-spin configuration leads to a strong lattice relaxation and a weaker cation-framework bonding. For both Cu- and Co-exchanged chabazite, the prediction of a preferred location of the cation in a six-membered ring of the zeolite agrees with experiment, but the energy differences between possible cation locations and the lattice distortion induced by the Al/Si substitution and the bonding of the cation depends quite significantly on the choice of the functional. All functionals predict similar energy differences for excited spin states. Spin-excitations are shown to be accompanied by significant changes in the cation coordination, which are more pronounced with hybrid functionals. The consequences of electronic spectra and chemical reactivity are analyzed in the following papers.

Cu-ZSM-5: A biomimetic inorganic model for methane oxidation

The present work highlights recent advances in elucidating the methane oxidation mechanism of inorganic Cu-ZSM-5 biomimic and in identifying the reactive intermediates that are involved. Such molecular understanding is important in view of upgrading abundantly available methane, but also to comprehend the working mechanism of genuine Cu-containing oxidation enzymes.

Behavior of Ag3 clusters inside a nanometer-sized space of ZSM-5 zeolite

We found from DFT calculations that Ag-Ag orbital interactions as well as Ag-O electrostatic interactions determine the structures of three silver cations inside a nanometer-sized cavity of ZSM-5 (Ag(3)-ZSM-5) in lower and higher spin states. Both interactions strongly depend on the number of Al atoms substituted for Si atoms on the ZSM-5 framework (ZSM-5(Al(n))), where n ranges from 1 to 3. In smaller n, stronger Ag-Ag orbital interactions and weaker Ag-O electrostatic interactions operate. Accordingly, there are significant dependencies of the structures of three silver cations on the number of Al atoms. In lower spin states of Ag(3)-ZSM-5(Al(1)) and Ag(3)-ZSM-5(Al(2)), D(3h)-like triangle clusters are contained inside ZSM-5 whereas their higher spin states have triangle clusters distorted significantly from the D(3h) structure. In lower spin states, the totally symmetric orbital consisting of 5s(Ag) orbitals is responsible for cluster formation, whereas in higher spin states occupation of a 5s(Ag)-based orbital with one node results in significant distortion of the triangle clusters. The distortion can be partially understood by analogies to Jahn-Teller distortion of the bare D(3h) Ag(3)(+) cluster in the triplet spin state. When n is 3, we found that three silver cations are isolated in a lower spin state and that a linear cluster consisting of two silver cations is formed in a higher spin state. Thus, we demonstrate from DFT calculations that the number of Al atoms can control the properties of three silver cations inside a ZSM-5 cavity. Since the structural and electronic features of the enclosed silver clusters can link to their catalytic properties, the DFT findings can help us to understand the catalytic activity of Ag-ZSM-5.