Ligating DNA with DNA

Recent Progress in Nucleic Acid Aptamer-Based Biosensors and Bioassays

As the key constituents of the genetic code, the importance of nucleic acids to life has long been appreciated. Despite being composed of only four structurally similar nucleotides, single-stranded nucleic acids, as in single-stranded DNAs and RNAs, can fold into distinct three-dimensional shapes due to specific intramolecular interactions and carry out functions beyond serving as templates for protein synthesis. These functional nucleic acids (FNAs) can catalyze chemical reactions, regulate gene expression, and recognize target molecules. Aptamers, whose name is derived from the Latin word aptus meaning “to fit”, are oligonucleotides that can bind their target ligands with high affinity and specificity. Since aptamers exist in nature but can also be artificially isolated from pools of random nucleic acids through a process called in vitro selection, they can potentially bind a diverse array of compounds. In this review, we will discuss the research that is being done to develop aptamers against various biomolecules, the progress in engineering biosensors by coupling aptamers to signal transducers, and the prospect of employing these sensors for a range of chemical and biological applications. Advances in aptamer technology emphasizes that nucleic acids are not only the fundamental molecules of life, they can also serve as research tools to enhance our understanding of life. The possibility of using aptamer-based tools in drug discovery and the identification of infectious agents can ultimately augment our quality of life.

Catalytic DNA (deoxyribozymes) for synthetic applications-current abilities and future prospects

The discovery of naturally occurring catalytic RNA (RNA enzymes, or ribozymes) in the 1980s immediately revised the view of RNA as a passive messenger that solely carries information from DNA to proteins. Because DNA and RNA differ only by the absence or presence of a 2'-hydroxyl group on each ribose ring of the polymer, the question of 'catalytic DNA?' arises. Although no natural DNA catalysts have been reported, since 1994 many artificial DNA enzymes, or 'deoxyribozymes', have been described. Deoxyribozymes offer insight into the mechanisms of natural and artificial ribozymes. DNA enzymes are also used as tools for in vitro and in vivo biochemistry, and they are key components of analytical sensors. This review focuses primarily on catalytic DNA for synthetic applications. Broadly defined, deoxyribozymes may have the greatest potential for catalyzing reactions in which the high selectivities of 'enzymes' are advantageous relative to traditional small-molecule catalysts. Although the scope of DNA-catalyzed synthesis is currently limited in most cases to oligonucleotide substrates, recent efforts have began to expand this frontier in promising new directions.

Site specific self-cleavage of certain assemblies of G-quadruplex

It is demonstrated that certain structural assemblies of G-quadruplex are capable of performing selfcleaving actions in a site specific fashion.

Catalytic metallodrugs

Drug discovery remains a top priority in medical science. The phenomenon of drug resistance has heightened the need for both new classes of pharmaceutical, as well as novel modes of action. A new paradigm for drug activity is presented, which includes both recognition and subsequent irreversible inactivation of therapeutic targets. Application to both RNA and enzyme therapeutic targets has been demonstrated, while incorporation of both binding and catalytic centers provides a double-filter mechanism for improved target selectivity and lower dosing. In contrast to RNA targets that are subject to strand scission chemistry mediated by ribose H-atom abstraction, proteins appear to be inactivated through oxidative damage to amino acid side chains around the enzyme active site. Methods to monitor both intracellular delivery and activity against RNA targets have been developed based on plasmid expression of the green fluorescent protein (GFP). Herein, the activity of representative metallodrugs is described in the context of both in vitro and cellular assays, and the mechanism of action is discussed. Studies with scavengers of reactive oxygen species (ROS) confirmed hydrogen peroxide to be an obligatory diffusible intermediate, prior to formation of a Cu-bound hydroxyl radical species generated from Fenton-type chemistry.

Improvement of DNA adenylation using T4 DNA ligase with a template strand and a strategically mismatched acceptor strand

DNA with a 5'-adenylpyrophosphoryl cap (5'-adenylated DNA; AppDNA) is an activated form of DNA that is the biochemical intermediate of the reactions catalyzed by DNA ligase, RNA ligase, polynucleotide kinase, and other nucleic acid modifying enzymes. 5'-Adenylated DNA is also useful for in vitro selection experiments. Efficient preparation of 5'-adenylated DNA is therefore desirable for several biochemical applications. Here we have developed a DNA adenylation procedure that uses T4 DNA ligase and is more reliable than a previously reported approach that used the 5'-phosphorylated donor DNA substrate to be adenylated, a DNA template, and ATP but no acceptor strand. Our improved DNA adenylation procedure uses the above components as well as an acceptor strand that has a strategically chosen C-T acceptor-template mismatch directly adjacent to the adenylation site. This mismatch permits adenylation of the donor DNA substrate but largely suppresses subsequent ligation of the donor with the acceptor, as assayed on nine different DNA substrates that collectively have all four DNA nucleotides represented at each of the first two positions. The new DNA adenylation procedure is successful using either laboratory-prepared or commercial T4 DNA ligase and works well on the preparative (2 nmol) scale for all nine of the test DNA substrates.

Novel Enzymatic Properties of DNA−Pt Complexes

DNA-Pt complexes have shown novel enzymatic activity as a peroxidase similar to that of horseradish peroxidase in the colorimetric reaction with its substrate. The enzymatic activity of these complexes increased with increasing reaction time and pH in reaction solutions of DNA and K2[PtCl4]. This enhanced enzymatic activity was attributed to the increase in Pt conjugated to DNA in the complex. The enzymatic activity per unit mole of the DNA-Pt complex was significantly higher for complexes prepared with high molecular weight DNA because the enzymatic activity of the complex per repeat unit of DNA was almost constant for these complexes prepared under the same reaction conditions. All the DNA-Pt complexes in this study prepared with different DNA sequences (i.e., [A]20, [G]20, [C]20, [T]20, and [AG]10) exhibited peroxidase enzymatic activity. These complexes showed good thermal stability as compared to native horseradish peroxidase.

Characterization of pH3DZ1 — An RNA-cleaving deoxyribozyme with optimal activity at pH 3

We previously described a cis-acting RNA-cleaving deoxyribozyme known as pH3DZ1 that exhibits optimal catalytic activity at pH 3.0 (Zhongjie Liu, Shirley H. Mei, John D. Brennan, and Yingfu Li. J. Am. Chem. Soc. 125, 7539 (2003)). This DNA catalyst was made of a 99-nucleotide (nt) catalytic domain covalently linked to a 23-nt DNA–RNA chimeric substrate containing a single ribonucleotide as the cleavage site. In the present work, we conducted an extensive sequence examination of this deoxyribozyme via nucleotide truncation and reselection experiments, with a goal to minimize its size and identify the nucleotides that are crucial to its catalytic function. A trans-acting deoxyribozyme that can process an external substrate was also successfully designed. Stretches of 30 and 17 nucleotides from the 5′ and 3′ ends of the trans catalyst, respectively, were found to be completely dispensable; in contrast, few nucleotides could be deleted internally without producing a detrimental effect. The reselection experiment led to the discovery of 7 and 5 absolutely conserved nucleotides located at the 5′ and 3′ ends of the minimized catalyst, respectively, separated by a 31-nt element in which 14 highly conserved nucleotides were scattered among 17 variable nucleotides. The shortened deoxyribozyme and the original catalyst showed a similar pH profile with the optimal activity at pH 3; however, the minimized deoxyribozyme still exhibited strong catalytic activity at pH 2.5, while the full-length catalyst was barely active at this pH. Finally, it was found that this deoxyribozyme generated two cleavage fragments, one with 2′,3′-cyclic phosphate and the other with 5′-OH.Key words: DNA, deoxyribozyme, RNA cleavage, in vitro selection, catalysis.

Entrapment of Fluorescence Signaling DNA Enzymes in Sol−Gel-Derived Materials for Metal Ion Sensing

Three fluorescence signaling DNA enzymes (deoxyribozymes or DNAzymes) were successfully immobilized within a series of sol-gel-derived matrixes and used for sensing of various metal ions. The DNAzymes are designed such that binding of appropriate metal ions induces the formation of a catalytic site that cleaves a ribonucleotide linkage within a DNA substrate. A fluorophore (fluorescein) and a quencher (DABCYL, [4-(4-dimethylaminophenylazo)benzoic acid]) were placed on the two deoxythymidines flanking the ribonucleotide to allow the generation of fluorescence upon the catalytic cleavage at the RNA linkage. In general, all DNAzymes retained at least partial catalytic function when entrapped in either hydrophilic or hydrophobic silica-based materials, but displayed slower response times and lower overall signal changes relative to solution. Interestingly, it was determined that maximum sensitivity toward metal ions was obtained when DNAzymes were entrapped into composite materials containing approximately 40% of methyltrimethoxysilane (MTMS) and approximately 60% tetramethoxysilane (TMOS). Highly polar materials derived from sodium silicate, diglycerylsilane, or TMOS had relatively low signal enhancements, while materials with very high levels of MTMS showed significant leaching and low signal enhancements. Entrapment into the hybrid silica material also reduced signal interferences that were related to metal-induced quenching; such interferences were a significant problem for solution-based assays and for polar materials. Extension of the solid-phase DNAzyme assay toward a multiplexed assay format for metal detection is demonstrated, and shows that sol-gel technology can provide new opportunities for the development of DNAzyme-based biosensors.

Characterization of Z-DNA as a nucleosome-boundary element in yeast Saccharomyces cerevisiae

In this article, the effect of a d(CG) DNA dinucleotide repeat sequence on RNA polymerase II transcription is examined in yeast Saccharomyces cerevisiae. Our previous report shows that a d(CG)n dinucleotide repeat sequence located proximally upstream of the TATA box enhances transcription from a minimal CYC1 promoter in a manner that depends on its surrounding negative supercoiling. Here, we demonstrate that the d(CG)9 repeat sequence stimulates gene activity by forming a Z-DNA secondary structure. Furthermore, the extent of transcriptional enhancement by Z-DNA is promoter-specific and determined by its separation distance relative to the TATA box. The stimulatory effect exerted by promoter proximal Z-DNA is not affected by helical phasing relative to the TATA box, suggesting that Z-DNA effects transcription without interacting with the general transcription machinery by looping-out the intervening DNA. A nucleosome-scanning assay reveals that the d(CG)9 repeat sequence in the Z conformation blocks nucleosome formation, and it is found in the linker DNA with two flanking nucleosomes. This result suggests that Z-DNA formation proximally upstream of a promoter is sufficient to demarcate the boundaries of its neighboring nucleosomes, which produces transcriptionally favorable locations for the TATA box near the nucleosomal DNA-entry site and at dyad positions on the nucleosome. These findings suggest that Z-DNA formation in chromatin is a part of the "genomic code" for nucleosome positioning in vivo.

Conversion of a ribozyme to a deoxyribozyme through in vitro evolution

An RNA ligase ribozyme was converted to a corresponding deoxyribozyme through in vitro evolution. The ribozyme was prepared as a DNA molecule of the same sequence, and had no detectable activity. A population of randomized variants of this DNA was constructed and evolved to perform RNA ligation at a rate similar to that of the starting ribozyme. When the deoxyribozyme was prepared as an RNA molecule of the same sequence, it had no detectable activity. Thus, the evolutionary transition from an RNA to a DNA enzyme represents a switch, rather than a broadening, of the chemical basis for catalytic function. This transfer of both information and function is relevant to the transition between two different genetic systems based on nucleic acid-like molecules, as postulated to have occurred during the early history of life on Earth.

Quenching of fluorophore-labeled DNA oligonucleotides by divalent metal ions: implications for selection, design, and applications of signaling aptamers and signaling deoxyribozymes

Recent years have seen a dramatic increase in the use of fluorescence-signaling DNA aptamers and deoxyribozymes as novel biosensing moieties. Many of these functional single-stranded DNA molecules are either engineered to function in the presence of divalent metal ion cofactors or designed as sensors for specific divalent metal ions. However, many divalent metal ions are potent fluorescence quenchers. In this study, we first set out to examine the factors that contribute to quenching of DNA-bound fluorophores by commonly used divalent metal ions, with the goal of establishing general principles that can guide future exploitation of fluorescence-signaling DNA aptamers and deoxyribozymes as biosensing probes. We then extended these studies to examine the effect of specific metals on the signaling performance of both a structure-switching signaling DNA aptamer and an RNA-cleaving and fluorescence-signaling deoxyribozyme. These studies showed extensive quenching was obtained when using divalent transition metal ions owing to direct DNA-metal ion interactions, leading to combined static and dynamic quenching. The extent of quenching was dependent on the type of metal ion and the concentration of supporting monovalent cations in the buffer, with quenching increasing with the number of unpaired electrons in the metal ion and decreasing with the concentration of monovalent ions. The extent of quenching was independent of the fluorophore, indicating that quenching cannot be alleviated simply by changing the nature of the fluorescent probe. Our results also show that the DNA sequence and the local secondary structure in the region of the fluorescent tag can dramatically influence the degree of quenching by divalent transition metal ions. In particular, the extent of quenching is predominantly determined by the fluorophore location with respect to guanine-rich and duplex regions within the strand sequence. Examination of the effect of both the type and concentration of metal ions on the performance of a fluorescence-signaling aptamer and a signaling deoxyribozyme confirms that judicious choice of divalent transition metal ions is important in maximizing signals obtained from such systems.

Monitoring single-stranded DNA secondary structure formation by determining the topological state of DNA catenanes

Single-stranded DNA (ssDNA) has essential biological functions during DNA replication, recombination, repair, and transcription. The structure of ssDNA must be better understood to elucidate its functions. However, the available data are too limited to give a clear picture of ssDNA due to the extremely capricious structural features of ssDNA. In this study, by forming DNA catenanes and determining their topology (the linking number, Lk) through the electrophoretic analysis, we demonstrate that the studies of catenanes formed from two ssDNA molecules can yield valuable new information about the ssDNA secondary structure. We construct catenanes out of two short (60/70 nt) ssDNA molecules by enzymatic cyclization of linear oligodeoxynucleotides. The secondary structure formed between the two DNA circles determines the topology (the Lk value) of the constructed DNA catenane. Thus, formation of the secondary structure is experimentally monitored by observing the changes of linking number with sequences and conditions. We found that the secondary structure of ssDNA is much easier to form than expected: the two strands in an internal loop in the folded ssDNA structure prefer to braid around each other rather than stay separately forming a loop, and a duplex containing only mismatched basepairs can form under physiological conditions.

Characterization of a catalytically efficient acidic RNA-cleaving deoxyribozyme

We previously demonstrated—through the isolation of RNA-cleaving deoxyribozymes by in vitro selection that are catalytically active in highly acidic solutions—that DNA, despite its chemical simplicity, could perform catalysis under challenging chemical conditions [Liu,Z., Mei,S.H., Brennan,J.D. and Li,Y. (2003) J. Am. Chem. Soc. 125, 7539–7545]. One remarkable DNA molecule therefrom is pH4DZ1, a self-cleaving deoxyribozyme that exhibits a k_obs of ∼1 min⁻¹ at pH 3.8. In this study, we carried out a series of experiments to examine the sequence and catalytic properties of this acidic deoxyribozyme. Extensive nucleotide truncation experiments indicated that pH4DZ1 was a considerably large deoxyribozyme, requiring ∼80 out of the original 123 nt for the optimal catalytic activity. A reselection experiment identified ten absolutely conserved nucleotides that are distributed in three catalytically crucial sequence elements. In addition, a trans deoxyribozyme was successfully designed. Comparison of the observed rate constant of pH4DZ1 with experimentally determined rate constant for the uncatalyzed reaction revealed that pH4DZ1 achieved a rate enhancement of ∼10⁶-fold. This study provides valuable information about this low-pH-functional deoxyribozyme and paves way for further structural and mechanistic characterization of this unique catalytic DNA.

Zn2+-dependent deoxyribozymes that form natural and unnatural RNA linkages

We report Zn(2+)-dependent deoxyribozymes that ligate RNA. The DNA enzymes were identified by in vitro selection and ligate RNA with k(obs) up to 0.5 min(-)(1) at 1 mM Zn(2+) and 23 degrees C, pH 7.9, which is substantially faster than our previously reported Mg(2+)-dependent deoxyribozymes. Each new Zn(2+)-dependent deoxyribozyme mediates the reaction of a specific nucleophile on one RNA substrate with a 2',3'-cyclic phosphate on a second RNA substrate. Some of the Zn(2+)-dependent deoxyribozymes create native 3'-5' RNA linkages (with k(obs) up to 0.02 min(-)(1)), whereas all of our previous Mg(2+)-dependent deoxyribozymes that use a 2',3'-cyclic phosphate create non-native 2'-5' RNA linkages. On this basis, Zn(2+)-dependent deoxyribozymes have promise for synthesis of native 3'-5'-linked RNA using 2',3'-cyclic phosphate RNA substrates, although these particular Zn(2+)-dependent deoxyribozymes are likely not useful for this practical application. Some of the new Zn(2+)-dependent deoxyribozymes instead create non-native 2'-5' linkages, just like their Mg(2+) counterparts. Unexpectedly, other Zn(2+)-dependent deoxyribozymes synthesize one of three unnatural linkages that are formed upon the reaction of an RNA nucleophile other than a 5'-hydroxyl group. Two of these unnatural linkages are the 3'-2' and 2'-2' linear junctions created when the 2'-hydroxyl of the 5'-terminal guanosine of one RNA substrate attacks the 2',3'-cyclic phosphate of the second RNA substrate. The third unnatural linkage is a branched RNA that results from attack of a specific internal 2'-hydroxyl of one RNA substrate at the 2',3'-cyclic phosphate. When compared with the consistent creation of 2'-5' linkages by Mg(2+)-dependent ligation, formation of this variety of RNA ligation products by Zn(2+)-dependent deoxyribozymes highlights the versatility of transition metals such as Zn(2+) for mediating nucleic acid catalysis.

Secondary-structure characterization of two proficient kinase deoxyribozymes

Dk1 and Dk2 are two catalytically proficient, manganese-dependent, guanine-rich deoxyribozymes previously isolated for DNA phosphorylation. In this study, we carried out a series of experiments that aimed to understand the structural properties of Dk1 and Dk2 and compare the structural similarities or differences of these two distinct deoxyribozymes that carry out similar catalytic functions. First, we performed reselections from two partially randomized DNA libraries on the basis of the original Dk1 and Dk2 sequences to isolate catalytically active sequence variants and identify nucleotides that are invariable, well-conserved, or highly mutagenized. Sequence analysis of these variants assisted by secondary-structure predictions led to the identification of possible Watson-Crick base-pairing regions within each deoxyribozyme. Sequence truncation and base-pair partner exchange experiments were conducted to confirm, or rule out, the existence of the predicted secondary-structure elements. Finally, methylation interference experiments were applied to identify nucleotides that are potentially important for the tertiary structure folding of the deoxyribozymes. Our data suggest that Dk1 and Dk2, despite the differences in their primary sequences and NTP requirements, use an analogous stem-loop element to anchor a structural domain of substantial tertiary interactions to execute their catalytic functions.

Natural and engineered nucleic acids as tools to explore biology

RNA and DNA molecules can form complex, three-dimensional folded structures that have surprisingly sophisticated functions, including catalysing chemical reactions and controlling gene expression. Although natural nucleic acids make occasional use of these advanced functions, the true potential for sophisticated function by these biological polymers is far greater. An important challenge for biochemists is to take RNA and DNA beyond their proven use as polymers that form double-helical structures. Molecular engineers are beginning to harness the power of nucleic acids that form more complex three-dimensional structures, and apply them as tools for exploring biological systems and as therapeutics.

Tracing sequence diversity change of RNA-cleaving deoxyribozymes under increasing selection pressure during in vitro selection

In vitro selection has been used extensively over the past 10 years to create functionally diverse DNA enzymes. The majority of in vitro selection experiments to date have focused on the outcome rather than the process itself, a process that remains to be fully elucidated. In vitro selection techniques rely on the probability that some DNA molecules in a random-sequence library will fold into an appropriate tertiary structure and catalyze a desired reaction. Thus, sufficient sequence diversity in the DNA pool (and hence more catalytic DNA sequences) is a prerequisite for the successful isolation of efficient deoxyribozymes. The catalytic sequence diversity established by in vitro selection is governed largely by the choice of selection pressures, one of which is the length of the reaction time. The objective of this study was to evaluate the sequence diversity change of a pool of RNA-cleaving deoxyribozymes as a function of the reaction time. Seventeen rounds of in vitro selection were performed, and the reaction time was progressively decreased from 5 h to 5 s. A representative population from each time class was subsequently cloned and sequenced. A decline in sequence diversity was observed with decreasing reaction time, and the relationship appears to be logarithmic. In contrast, a control selection performed with a constant reaction time during each round led to a linear and comparatively very slow decrease in sequence diversity. This study provides the first methodical examination of the change in catalytic sequence diversity that occurs through the course of a deoxyribozyme selection experiment. Moreover, it represents a first step toward fully understanding the intricate pathway that lies between the beginning and end of an in vitro selection experiment.