Construction of test strips for lung cancer detection based on aptamers

Lung cancer is the most common malignancy worldwide. Early diagnosis helps to reduce mortality and improve survival. Aptamers are widely used in cancer screening because of their high specificity, good stability and low cost. In this study, using the specific aptamer of lung cancer serum, the sandwich method colloidal gold test strip was prepared by isothermal amplification technique and the principle of nucleic acid hybridisation for the early diagnosis of lung cancer. The results showed that the test strip was positive in 8 patients with lung cancer, which was consistent with the actual cases. The test strip can accurately identify lung cancer patients. The concentration range of nucleic acid detection is 1 × 10-4 - 7 × 10-4 mol/L, and the detection limit is 0.67 mM. The test strip detection method has low cost and simple operation, and provides a reference for the development of home portable tumor early detection.

AptaShield: A Universal Signal-Transduction System for Fast and High-Throughput Optical Molecular Biosensing

Biosensing technologies are often described to provide facile, sensitive, and minimally to noninvasive detection of molecular analytes across diverse scientific, environmental, and clinical diagnostic disciplines. However, commercialization has been very limited mostly due to the difficulty of biosensor reconfiguration for different analyte(s) and limited high-throughput capabilities. The immobilization of different biomolecular probes (e.g., antibodies, peptides, and aptamers) requires the sensor surface chemistry to be tailored to provide optimal probe coupling, orientation, and passivation and prevent nonspecific interactions. To overcome these challenges, here we report the development of a solution-phase biosensor consisting of an engineered aptamer, the AptaShield, capable of universally binding to any antigen recognition site (Fab') of fluorescently labeled immunoglobulins (IgG) produced in rabbits. The resulting AptaShield biosensor relies on a low affinity dynamic equilibrium between the fluorescently tagged aptamer and IgG to generate a specific Förster resonance energy transfer (FRET) signal. As the analyte binds to the IgG, the AptaShield DNA aptamer-IgG complex dissociates, leading to an analyte concentration-dependent decrease of the FRET signal. The biosensor demonstrates high selectivity, specificity, and reproducibility for analyte quantification in different biological fluids (e.g., urine and blood serum) in a one-step and low sample volume (0.5-6.25 μL) format. The AptaShield provides a universal signal transduction mechanism as it can be coupled to different rabbit antibodies without the need for aptamer modification, therefore representing a robust high-throughput solution-phase technology suitable for point-of-care applications, overcoming the current limitations of gold standard enzyme-linked immunosorbent assays (ELISA) for molecular profiling.

Selection of ssDNA aptamers and construction of aptameric electrochemical biosensor for the detection of Giardia intestinalis trophozoite protein

Giardia intestinalis is one of the most widespread intestinal parasites and is considered a major cause of epidemic or sporadic diarrhea worldwide. In this study, we aimed to develop a rapid aptameric diagnostic technique for G. intestinalis infection. First, the SELEX (Systematic Evolution of Ligands by Exponential Enrichment) process generated DNA aptamers specific to a recombinant protein of the parasite's trophozoite. Ten selection rounds were performed; each round, the DNA library was incubated with the target protein conjugated to Sepharose beads. Then, the unbound sequences were removed by washing and the specific sequences were eluted and amplified by Polymerase Chain Reaction (PCR). Two aptamers were selected, and the dissociation constants (Kd), were determined as 2.45 and 16.95 nM, showed their high affinity for the G. intestinalis trophozoite protein. Subsequently, the aptamer sequence T1, which exhibited better affinity, was employed to develop a label-free electrochemical biosensor. A thiolated aptamer was covalently immobilized onto a gold screen-printed electrode (SPGE), and the binding of the targeted protein was monitored using square wave voltammetry (SWV). The developed aptasensor enabled accurate detection of the G. intestinalis recombinant protein within the range of 0.1 pg/mL to 100 ng/mL, with an excellent sensitivity (LOD of 0.35 pg/mL). Moreover, selectivity studies showed a negligible cross-reactivity toward other proteins such as bovine serum albumin, globulin, and G. intestinalis cyst protein.

Trends and challenges in electroanalytical biosensing methodologies for infectious viral diseases

Viral pandemic diseases have disruptive global consequences leading to millions of deaths and a severe impact on the global economy. Inadequate preventative protocols have led to an overwhelming demand for intensive care leading to uncontrollable burdens and even breakdown of healthcare sectors across many countries. The rapid detection of viral disease helps in the understanding of the relevant intricacies, helping to tackle infection with improved guidelines. Portable biosensor devices offer promising solutions by facilitating on-site detection of viral pathogens. This review summarizes the latest innovative strategies reported using electroanalytical methods for the screening of viral antigens. The structural components of viruses and their categories are presented followed by the various recognition elements and transduction techniques involved in biosensors. Core sections focus on biosensors reported for viral genomic detection(DNA and RNA) and antigenic capsid protein. Strategies for addressing the challenges of electroanalytical biosensing of viral components are also presented. The advantages, and disadvantages of biorecognition elements and nanozymes for the detection of viral disease are highlighted. Such technical insights will help researchers working in chemistry, and biochemistry as well as clinicians working in medical diagnostics.

Optimisation of denaturing ion pair reversed phase HPLC for the purification of ssDNA in SELEX

Aptamers have shown great promise as oligonucleotide-based affinity ligands for various medicinal and industrial applications. A critical step in the production of DNA aptamers via selective enhancement of ligands by exponential enrichment (SELEX) is the generation of ssDNA from dsDNA. There are a number of caveats associated with current methods for ssDNA generation, which can lower success rates of SELEX experiments. They often result in low yields thereby decreasing diversity or fail to eliminate parasitic PCR by-products leading to accumulation of by-products from round to round. Both contribute to the failure of SELEX protocols and therefore potentially limit the impact of aptamers compared to their peptide-based antibody counterparts. We have developed a novel method using ion pair reversed phase HPLC (IP RP HPLC) employed under denaturing conditions for the ssDNA re-generation stage of SELEX following PCR. We have utilised a range of 5' chemical modifications on PCR primers to amplify PCR fragments prior to separation and purification of the DNA strands using denaturing IP RP HPLC. We have optimised mobile phases to enable complete denaturation of the dsDNA at moderate temperatures that circumvents the requirement of high temperatures and results in separation of the ssDNA based on differences in their hydrophobicity. Validation of the ssDNA isolation and purity assessment was performed by interfacing the IP RP HPLC with mass spectrometry and fluorescence-based detection. The results show that using a 5' Texas Red modification on the reverse primer in the PCR stage enabled purification of the ssDNA from its complimentary strand via IP RP HPLC under denaturing conditions. Additionally, we have confirmed the purity of the ssDNA generated as well as the complete denaturation of the PCR product via the use of mass-spectrometry and fluorescence analysis therefore proving the selective elimination of PCR by-products and the unwanted complementary strand. Following lyophilisation, ssDNA yields of up to 80% were obtained. In comparison the streptavidin biotin affinity chromatography also generates pure ssDNA with a yield of 55%. The application of this method to rapidly generate and purify ssDNA of the correct size, offers the opportunity to improve the development of new aptamers via SELEX.

Aptamers for nanobodies: A nontoxic alternative to toxic ochratoxin A in immunoassays

To measure toxins using immunoassays, hazardous toxin standards need to be added for quantification. To solve this problem, we propose to use aptamers as competitors to replace toxin standards. In this work, aptamers specific for ochratoxin A (OTA) nanobodies were selected using a DNA library containing a 36 nucleotide random region. The obtained sequences were highly aligned and the best competitor was identified to be a sequence named apt2-OT based on an indirect competitive enzyme-linked immunosorbent assay (ELISA). The Kd of apt2-OT was measured to be 2.86 μM using local surface plasmon resonance spectroscopy. The optimal apt2-OT was identified to substitute the OTA standard with a concentration needed for 50% inhibition of binding (IC50) of 3.26 μM based on a nontoxic direct competitive ELISA. The equivalence relationship between the aptamer and OTA was established in a flour sample, and a recovery experiment was performed. The detection limit for this method was 0.23 ng/mL, with a linear range from 0.25 to 10.50 ng/mL. The recovery rate was 97.5%-115.5%. This study provides a low-cost, rapid and environmentally friendly alternative to the development of immunoassays for toxins.

Aptamer-based therapy for fighting biofilm-associated infections

Biofilms are key players in the pathogenesis of most of chronic infections associated with host tissue or fluids and indwelling medical devices. These chronic infections are hard to be treated due to the increased biofilms tolerance towards antibiotics in comparison to planktonic (or free living) cells. Despite the advanced understanding of their formation and physiology, biofilms continue to be a challenge and there is no standardized therapeutic approach in clinical practice to eradicate them. Aptamers offer distinctive properties, including excellent affinity, selectivity, stability, making them valuable tools for therapeutic purposes. This review explores the flexibility and designability of aptamers as antibiofilm drugs but, importantly, as targeting tools for diverse drug and delivery systems. It highlights specific examples of application of aptamers in biofilms of diverse species according to different modes of action including inhibition of motility and adhesion, blocking of quorum sensing molecules, and dispersal of biofilm-cells to planktonic state. Moreover, it discusses the limitations and challenges that impaired an increased success of the use of aptamers on biofilm management, as well as the opportunities related to aptamers modifications that can significantly expand their applicability on the biofilm field.

Rapid isolation of anti-idiotype aptamers for quantification of human monoclonal antibodies against SARS-CoV-2 spike protein

Therapeutic antibodies that block viral entry have already proven to be important, first line drugs for treatments of viral infections. In the case of SARS-CoV-2, combinations of multiple therapeutic antibodies may need to be rapidly identified and formulated in a way that blocks each new, predominant variant of the virus. For efficient introduction of any new antibody combination into patients, it is important to be able to monitor patient-specific pharmacokinetics of individual antibodies, which would include the time course of their specific capacity to block the viral spike proteins. Here, we present three examples of microfluidic-based rapid isolation of companion reagents useful for establishing combination antibody therapies. These reagents are specific three-dimensional imprints of variable regions of individual human monoclonal antibodies against the -spike protein of SARS-CoV-2 virus in the form of oligonucleotide-based ligands (aptamers). We implement these anti-idiotypic aptamers as bioreceptors in graphene-based field-effect transistor sensors to accomplish label free, rapid, and sensitive detection of matching antibodies within minutes. Through this work we have demonstrated the general applicability of anti-idiotype aptamers as capture reagents in quantification of active forms of monoclonal antibodies in complex biological mixtures.

Selective Hemin Binding by a Non-G-quadruplex Aptamer with Higher Affinity and Better Peroxidase-like Activity

Previous aptamers for porphyrins and metalloporphyrins were all guanine-rich sequences that can fold in G-quadruplex structures. Due to stacking-based binding, these aptamers can hardly tell different porphyrins apart, and they can also bind other planar molecules, hindering their practical applications. In this work, we used the capture selection method to obtain aptamers for hemin and protoporphyrin IX (PPIX). The hemin aptamer (Hem1) features two highly conserved repeating binding loops, and it cannot form a G-quadruplex, which was supported by its Mg2+ -dependent but K+ -independent hemin binding and CD spectroscopy. Isothermal titration calorimetry revealed much higher enthalpy change for the new aptamer, and the best aptamer showed a Kd of 43 nM hemin. Hem1 can also enhance the peroxidase-like activity of hemin. This work demonstrates that aptamers have alternative ways to bind porphyrins allowing selective recognition of different porphyrins.

RNA aptamers developed against tRip: A preliminary approach targeting tRNA entry in Plasmodium

Malaria is caused by Plasmodium parasites that multiply inside host cells and can be lethal when P. falciparum is involved. We identified tRip as a membrane protein that facilitates the import of exogenous transfer RNA (tRNA) into the parasite. tRip encompasses a tRNA binding domain exposed on the parasite surface. We used the SELEX approach to isolate high-affinity and specific tRip-binding RNA motifs from a library of random 25 nucleotide-long sequences. In five rounds of combined negative and positive selections, an enriched pool of aptamers was obtained; sequencing revealed that they were all different in their primary sequence; only by comparing their structure predictions did most of the selected aptamers reveal a conserved 5-nucleotide motif sequence. We showed that the integral motif is essential for tRip-binding while the rest of the molecule can be significantly reduced or mutated as long as the motif is presented in a single-stranded region. Such RNA aptamers bind in place of the original tRNA substrate and act as an efficient competitor, suggesting that they can block tRip function and slow parasite development.

Aptamer-based diagnostic and therapeutic approaches for animal viruses: A review

Animal diseases often have significant consequences due to the unclear and time-consuming diagnosis process. Furthermore, the emergence of new viral infections and drug-resistant pathogens has further complicated the diagnosis and treatment of viral diseases. Aptamers, which are obtained through systematic evolution of ligands by exponential enrichment (SELEX) technology, provide a promising solution as they enable specific identification and binding to targets, facilitating pathogen detection and the development of novel therapeutics. This review presented an overview of aptasensors for animal virus detection, discussed the antiviral activity and mechanisms of aptamers, and highlighted advancements in aptamer-based antiviral research following the COVID-19 pandemic. Additionally, the challenges and prospects of aptamer-based virus diagnosis and treatment research were explored. Although this review was not exhaustive, it offered valuable insights into the progress of aptamer-based antiviral drug research, target mechanisms, as well as the development of novel antiviral drugs and biosensors.

Aptamer-functionalized MOFs and AI-driven strategies for early cancer diagnosis and therapeutics

Metal-Organic Frameworks (MOFs) have exceptional inherent properties that make them highly suitable for diverse applications, such as catalysis, storage, optics, chemo sensing, and biomedical science and technology. Over the past decades, researchers have utilized various techniques, including solvothermal, hydrothermal, mechanochemical, electrochemical, and ultrasonic, to synthesize MOFs with tailored properties. Post-synthetic modification of linkers, nodal components, and crystallite domain size and morphology can functionalize MOFs to improve their aptamer applications. Advancements in AI and machine learning led to the development of nonporous MOFs and nanoscale MOFs for medical purposes. MOFs have exhibited promise in cancer therapy, with the successful accumulation of a photosensitizer in cancer cells representing a significant breakthrough. This perspective is focused on MOFs' use as advanced materials and systems for cancer therapy, exploring the challenging aspects and promising features of MOF-based cancer diagnosis and treatment. The paper concludes by emphasizing the potential of MOFs as a transformative technology for cancer treatment and diagnosis.

Nano-biosensor based on manganese dioxide nanosheets and carbon dots for dual-mode determination of Staphylococcus aureus

A ratiometric fluorescence and colorimetry dual-mode nano-biosensor has been established for Staphylococcus aureus (S. aureus) determination. The prepared approaches of Manganese dioxide nanosheets (MnO2 NSs) and carbon dots (BCDs) were facile, efficient and labor-saving and MnO2 NSs-mediated fluorescence quenching and oxidation could amplify detection signals. The dual-mode determination had a broad linear range of 37 ∼ 3.7 × 106 CFU/mL and low detection limits of 9 CFU/mL (ratiometric fluorescence) and 22 CFU/mL (colorimetry). Meanwhile, the method was applied in real samples with recovery ranging of 90 ∼ 102% and RSD < 4.44%, which was an insignificant difference with standard plate counting. The new dual-mode approach of S. aureus possesses the advantages of superior sensitivity, precision, accuracy and specificity. Moreover, the dual-mode nano-biosensor can be adopted in other foodborne pathogens determination by changing corresponding aptamers and provide an enlightenment in monitoring food safety.

Recent applications of RNA therapeutic in clinics

Ribonucleic acid (RNA) therapy has been extensively researched for several decades and has garnered significant attention in recent years owing to its potential in treating a broad spectrum of diseases. It falls under the domain of gene therapy, leveraging RNA molecules as a therapeutic approach in medicine. RNA can be targeted using small-molecule drugs, or RNA molecules themselves can serve as drugs by interacting with proteins or other RNA molecules. While several RNA drugs have been granted clinical approval, numerous RNA-based therapeutics are presently undergoing clinical investigation or testing for various conditions, including genetic disorders, viral infections, and diverse forms of cancer. These therapies offer several advantages, such as high specificity, enabling precise targeting of disease-related genes or proteins, cost-effectiveness, and a relatively straightforward manufacturing process. Nevertheless, successful translation of RNA therapies into widespread clinical use necessitates addressing challenges related to delivery, stability, and potential off-target effects. This chapter provides a comprehensive overview of the general concepts of various classes of RNA-based therapeutics, the mechanistic basis of their function, as well as recent applications of RNA therapeutic in clinics.

Solid-State Nanopores for Biomolecular Analysis and Detection

Advances in nanopore technology and data processing have rendered DNA sequencing highly accessible, unlocking a new realm of biotechnological opportunities. Commercially available nanopores for DNA sequencing are of biological origin and have certain disadvantages such as having specific environmental requirements to retain functionality. Solid-state nanopores have received increased attention as modular systems with controllable characteristics that enable deployment in non-physiological milieu. Thus, we focus our review on summarizing recent innovations in the field of solid-state nanopores to envision the future of this technology for biomolecular analysis and detection. We begin by introducing the physical aspects of nanopore measurements ranging from interfacial interactions at pore and electrode surfaces to mass transport of analytes and data analysis of recorded signals. Then, developments in nanopore fabrication and post-processing techniques with the pros and cons of different methodologies are examined. Subsequently, progress to facilitate DNA sequencing using solid-state nanopores is described to assess how this platform is evolving to tackle the more complex challenge of protein sequencing. Beyond sequencing, we highlight the recent developments in biosensing of nucleic acids, proteins, and sugars and conclude with an outlook on the frontiers of nanopore technologies.

Insulin-like Growth Factor 2-Tagged Aptamer Chimeras (ITACs) Modular Assembly for Targeted and Efficient Degradation of Two Membrane Proteins

Overexpression of pathogenic membrane proteins drives abnormal proliferation and invasion of tumor cells. Various strategies to durably knockdown membrane proteins with heterobifunctional degraders have been successfully developed, including LYTAC, KineTAC, and AbTAC. However, challenges including complicated synthetic procedures and the inability to simultaneously degrade multiple pathogenic proteins still exist. Herein, we developed insulin-like growth factor 2 (IGF2)-tagged aptamer chimeras (ITACs) that link the cell-surface lysosome-targeting receptor IGF2R and membrane proteins of interest (POIs) based on specific recognition of aptamers to the POIs and high-affinity binding of IGF2 to IGF2R. We demonstrated that ITACs exhibit robust degradation efficiency of various membrane proteins in multiple cell lines. Furthermore, systematic studies revealed that a moderate cell-surface IGF2R level is responsible for the excellent degradation performance of ITACs. Importantly, we further established a modular assembly strategy that allows assembly of one IGF2 with two aptamers with precise stoichiometry (dITACs), enabling cooperative and simultaneous degradation of two membrane proteins. This work provides an efficient and facile target membrane protein degradation platform and will shed light on the treatment of diseases related to the overexpression of membrane proteins.

Micromotor-based dual aptassay for early cost-effective diagnosis of neonatal sepsis

Given the long-life expectancy of the newborn, research aimed at improving sepsis diagnosis and management in this population has been recognized as cost-effective, which at early stages continues to be a tremendous challenge. Despite there is not an ideal-specific biomarker, the simultaneous detection of biomarkers with different behavior during an infection such as procalcitonin (PCT) as high specificity biomarker with one of the earliest biomarkers in sepsis as interleukin-6 (IL-6) increases diagnostic performance. This is not only due to their high positive predictive value but also, since it can also help the clinician to rule out infection and thus avoid the use of antibiotics, due to their high negative predictive value. To this end, we explore a cutting-edge micromotor (MM)-based OFF-ON dual aptassay for simultaneous determination of both biomarkers in 15 min using just 2 μL of sample from low-birth-weight neonates with gestational age less than 32 weeks and birthweight below 1000 g with clinical suspicion of late-onset sepsis. The approach reached the high sensitivities demanded in the clinical scenario (LODPCT = 0.003 ng/mL, LODIL6 = 0.15 pg/mL) with excellent correlation performance (r > 0.9990, p < 0.05) of the MM-based approach with the Hospital method for both biomarkers during the analysis of diagnosed samples and reliability (Er < 6% for PCT, and Er < 4% for IL-6). The proposed approach also encompasses distinctive technical attributes in a clinical scenario since its minimal sample volume requirements and expeditious results compatible with few easy-to-obtain drops of heel stick blood samples from newborns admitted to the neonatal intensive care unit. This would enable the monitoring of both sepsis biomarkers within the initial hours after the manifestation of symptoms in high-risk neonates as a valuable tool in facilitating prompt and well-informed decisions about the initiation of antibiotic therapy.These results revealed the asset behind micromotor technology for multiplexing analysis in diagnosing neonatal sepsis, opening new avenues in low sample volume-based diagnostics.

Iodinated organic molecule as tag for inductively coupled Plasma-mass spectrometry aptamer assays

Inductively Coupled Plasma-Mass Spectrometry (ICP-MS) aptamer-based assays using metallic nanostructures or chelates as exogenous tags have gained growing attention in the last decade. We describe here a proof-of-concept study based on the exploitation of a simple organic molecule as a tag, i.e.l-thyroxine carrying four iodine atoms detectable by ICP-MS. A solid-phase assay involving the structure-switching format was deployed for the detection of the small molecule l-tyrosinamide as model target. The overall design involved (i) a reporter agent consisting of a DNA aptamer incorporating a single l-thyroxine label at its end and (ii) a capture agent, which is a partially complementary strand, immobilized on a microplate. Limit of detection in the nanomolar range was reported. The present labeling approach was further developed for the detection of a model protein (α-thrombin), using a sandwich mode, and proved effective in a biological matrix. We believe that the l-thyroxine tagging method could become a simple and robust alternative to commonly used labeling methods for ICP-MS aptamer-based assays.

Advances in endotoxin analysis

The outer membrane of gram-negative bacteria is primarily composed of lipopolysaccharide (LPS). In addition to protection, LPS defines the distinct serogroups used to identify bacteria specifically. Furthermore, LPS also act as highly potent stimulators of innate immune cells, a phenomenon essential to understanding pathogen invasion in the body. The complex multi-step process of LPS binding to cells involves several binding partners, including LPS binding protein (LBP), CD14 in both membrane-bound and soluble forms, membrane protein MD-2, and toll-like receptor 4 (TLR4). Once these pathways are activated, pro-inflammatory cytokines are eventually expressed. These binding events are also affected by the presence of monomeric or aggregated LPS. Traditional techniques to detect LPS include the rabbit pyrogen test, the monocyte activation test and Limulus-based tests. Modern approaches are based on protein, antibodies or aptamer binding. Recently, novel techniques including electrochemical methods, HPLC, quartz crystal microbalance (QCM), and molecular imprinting have been developed. These approaches often use nanomaterials such as gold nanoparticles, quantum dots, nanotubes, and magnetic nanoparticles. This chapter reviews current developments in endotoxin detection with a focus on modern novel techniques that use various sensing components, ranging from natural biomolecules to synthetic materials. Highly integrated and miniaturized commercial endotoxin detection devices offer a variety of options as the scientific and technologic revolution proceeds.

Diagnosis and Therapeutic Strategies Based on Nucleic Acid Aptamers Selected against Pseudomonas aeruginosa: The Challenge of Cystic Fibrosis

Antimicrobial resistance (AMR) is a rapidly spreading global health problem, and approximately five million deaths associated with AMR pathogens were identified prior to the COVID-19 pandemic. Pseudomonas aeruginosa has developed increasing AMR, and in patients with cystic fibrosis (CF) colonized by this bacterium, rare phenotypes have emerged that complicate the diagnosis and treatment of the hosts, in addition to multiple associated "epidemic strains" with high morbidities and mortalities. The conjugation of aptamers with fluorochromes or nanostructures has allowed the design of new identification strategies for Pseudomonas aeruginosa with detection limits of up to 1 cell ⋅ mL-1 , and the synergy of aptamers with antibiotics, antimicrobial peptides and nanostructures has exhibited promising therapeutic qualities. Some selected aptamers against this bacterium have shown intrinsic antimicrobial activity. However, these aptamers have been poorly evaluated in clinical isolates and have shown decreased interactions for CF isolates, demonstrating, in these cases, uncommon phenotypes resulting from the selective qualities of this disease as well as the great adaptive capacity of the pathogen. Therefore, finding an aptamer or set of aptamers that have the ability to recognize strange phenotypes of this bacillus is crucial in the battle against AMR.

Novel oligonucleotide-based sorbent for the selective extraction of cadmium from serum samples

The objective was to develop a sorbent functionalized with aptamers for the selective extraction of cadmium from biological samples. Two oligonucleotide sequences reported in literature as specific to cadmium were covalently grafted on activated Sepharose, with grafting yields of 45%. Once the supports packed in cartridges, a thorough study of the percolation conditions favoring Cd(II) retention was performed, demonstrating the importance of the nature of this medium. A high selectivity was reached when applying the optimal conditions as a recovery of 85% was obtained using the sorbent functionalized with one of the specific aptamers and only 1% on the control sorbent grafted with a scramble sequence. A high specificity was also obtained as recoveries for most of other ions were lower than 15%. The capacity of this oligosorbent estimated to 180 ng of Cd(II) for 30 mg of support was perfectly adapted to the trace analysis of Cd(II). The extraction procedure was then applied to a serum sample which was first subjected to acid precipitation. The initial concentration of cadmium in the serum was estimated to 1.83 µg/L using standard addition method and an extraction yield of 75 ± 1.6% was measured. Comparison of these results with those obtained without oligoextraction (recovery of 57%) showed a significant reduction of matrix effects in ICP-MS thanks to the use of the oligosorbent, underlining its interest for a more reliable quantification of Cd(II). This result was confirmed by performing the oligoextraction protocol on a certified serum.

Octahedral Cu2O nanomaterials as electrochemical aptasensor for sensitive detection of tetracycline in milk

In this work, A novel label-free electrochemical biosensor based on octahedral Cu2O @ Au nanocomposites was developed for the detection of tetracycline. The gold nanoparticles (AuNPs) on the surface of Cu2O nanomaterials not only improve the electrochemical performance, but also can be used as a binding site for thiol-modified tetracycline aptamers, which can specifically bind to tetracycline. Cu2O @ Au nanocomposites provide a synergistic effect of electrochemical signal amplification and tetracycline recognition strategy. Under the optimal conditions, the proposed biosensor exhibited different electrochemical reactions for different concentrations of tetracycline, with a linear range of 1 nM-1000 μM and a detection limit of 0.16 nM. This work provides a new idea for rapid and sensitive detection of tetracycline by using a simple and economical tetracycline aptamer combined with Cu2O @ Au biosensor platform.

The effect of magnetic bead size on the isolation efficiency of lung cancer cells in a serpentine microchannel with added cavities

An investigation was conducted to examine the effect of magnetic bead (MB) size on the effectiveness of isolating lung cancer cells using the immunomagnetic separation (IMS) method in a serpentine microchannel with added cavities (SMAC) structure. Carboxylated magnetic beads were specifically conjugated to target cells through a modification procedure using aptamer materials. Cells immobilized with different sizes (in micrometers) of MBs were captured and isolated in the proposed device for comparison and analysis. The study yields significance regarding the clarification of device working principles by using a computational model. Furthermore, an accurate evaluation of the MB size impact on capture efficiency was achieved, including the issue of MB-cell accumulation at the inlet-channel interface, despite it being overlooked in many previous studies. As a result, our findings demonstrated an increasing trend in binding efficiency as the MB size decreased, evidenced by coverages of 50.5%, 60.1%, and 73.4% for sizes of 1.36 μm, 3.00 μm, and 4.50 μm, respectively. Additionally, the overall capture efficiency (without considering the inlet accumulation) was also higher for smaller MBs. However, when accounting for the actual number of cells entering the channel (i.e., the effective capture), larger MBs showed higher capture efficiency. The highest effective capture achieved was 88.4% for the size of 4.50 μm. This research provides an extensive insight into the impact of MB size on the performance of IMS-based devices and holds promise for the efficient separation of circulating cancer cells (CTCs) in practical applications.

Paper as smart support for bioreceptor immobilization in electrochemical paper-based devices

The use of paper as a smart support in the field of electrochemical sensors has been largely improved over the last 15 years, driven by its outstanding features such as foldability and porosity, which enable the design of reagent and equipment-free multi-analysis devices. Furthermore, the easy surface engineering of paper has been used to immobilize different bioreceptors, through physical adsorption, covalent bonding, and electrochemical polymerization, boosting the fine customization of the analytical performances of paper-based biosensors. In this review, we focused on the strategies to engineer the surface of the paper for the immobilization of (bio)recognition elements (eg., enzymes, antibodies, DNA, molecularly imprinted polymers) with the overriding goal to develop accurate and reliable paper-based electrochemical biosensors. Furthermore, we highlighted how to take advantage of paper for designing smart configurations by integrating different analytical processes in an eco-designed analytical tool, starting from the immobilization of the (bio)receptor and the reagents, through a designed sample flow along the device, until the analyte detection.

Immune checkpoint inhibitors and cancer immunotherapy by aptamers: an overview

Efforts in cancer immunotherapy aim to counteract evasion mechanisms and stimulate the immune system to recognise and attack cancer cells effectively. Combination therapies that target multiple aspects of immune evasion are being investigated to enhance the overall efficacy of cancer immunotherapy. PD-1 (Programmed Cell Death Protein 1), CTLA-4 (Cytotoxic T-Lymphocyte Antigen 4), LAG-3 (Lymphocyte-Activation Gene 3), and TIM-3 (T Cell Immunoglobulin and Mucin Domain-Containing Protein3) are all immune checkpoint receptors that play crucial roles in regulating the immune response and maintaining self-tolerance often exploited by cancer cells to evade immune surveillance. Antibodies targeted against immune checkpoint inhibitors such as anti-PD-1 antibodies (e.g., pembrolizumab, nivolumab), anti-CTLA-4 antibodies (e.g., Ipilimumab), and experimental drugs targeting LAG-3 and TIM-3, aim to block these interactions and unleash the immune system's ability to recognise and destroy cancer cells. The US FDA has approved different categories of immune checkpoint inhibitors that have been utilised successfully in some patients with metastatic melanoma, renal cell carcinoma, head and neck cancers, and non-small lung cancer. Although several immune checkpoint inhibitor antibodies have been developed, they exhibited immune-related adverse effects, resulting in hypophysitis, diabetes, and neurological issues. These adverse effects of antibodies can be reduced by developing aptamer against the target. Aptamers offer several advantages over traditional antibodies, such as improved specificity, reduced immunogenicity, and flexible design for reduced adverse effects that specifically target and block protein-protein or receptor-ligand interactions involved in immune checkpoint pathways. The current study aims to review the function of particular immune checkpoint inhibitors along with developed aptamer-mediated antitumor cytotoxicity in cancer treatment.

Analysis on the in-silico ensemble methods for 3D modelling of ssDNA aptamers

Understanding the 3-D structure of nucleic acid aptamers is important for the rational design of aptamer-based constructs in various applications, including for developing aptasensors. Herein, a simple approach for 3D modelling of ssDNA aptamers through an ensemble of web applications has been described. The procedure utilized 30 aptamers whose 3D XRD or NMR experimental structures are available for validation. As a first step, the primary sequences of ssDNA aptamers were transformed into 2D structures using six widely used web applications: RNA fold, Vector builder, RNA Structure, UNA fold, Centroid fold, and IP Knot. The generated 2D structures were then passed through the RNA composer web application to generate 3D RNA structure, which in turn was converted to 3D DNA structures using various Visual Molecular Dynamics web applications that also include conversion of ribose sugar into deoxyribose sugar backbone and uracil to thiamine. The energy-minimized generated 3D structures were matched well with high accuracy to their experimental counterparts. This study identified that the Guanine residues are crucial in the aptamer 3D structure prediction and in algorithms that generate secondary structures. Further, the GC content (<50%), GC bond percentage (<60%), and G:C ratio (<1.12) act as limiting factors in predicting the 2D structures of aptamers. There were variations in the 2D structure predictions by the web applications, even though all these applications were a combination of the MFE, MEA, and McCaskill functions. Processing these structures through the web applications described above produced best-fit 3D structures with the experimental one, thus offering the present ensemble approach to reliably predict the 3D structure of aptamers for various applications.

Integrating airway microbiome and blood proteomics data to identify multi-omic networks associated with response to pulmonary infection

Host response to airway infections can vary widely. Cystic fibrosis (CF) pulmonary exacerbations provide an opportunity to better understand the interplay between respiratory microbes and the host. This study aimed to investigate the observed heterogeneity in airway infection recovery by analyzing microbiome and host response (i.e., blood proteome) data collected during the onset of 33 pulmonary infection events. We used sparse multiple canonical correlation network (SmCCNet) analysis to integrate these two types of -omics data along with a clinical measure of recovery. Four microbe-protein SmCCNet subnetworks at infection onset were identified that strongly correlate with recovery. Our findings support existing knowledge regarding CF airway infections. Additionally, we discovered novel microbe-protein subnetworks that are associated with recovery and merit further investigation.

Selection of DNA Aptamers Against Neisseria gonorrhoeae Causing Sexually Transmitted Infection (STI)

Neisseria gonorrhoeae (NG) is the second most common bacterial sexually transmitted infection (STI) worldwide. Gonorrhoea is a very serious infection because if untreated, it can lead to significant ramifications to reproductive, maternal, & newborn health and increase transmission of HIV. Infections are very often asymptomatic and symptoms when present manifest differently in men and women. The cornerstone of gonorrhoea control is to assure rapid diagnosis and prompt treatment of patients to prevent the onward spread of infection. The resource-rich settings are utilizing nucleic acid amplification tests (NAATs) for diagnosis, whereas resource-limited settings like ours where laboratory infrastructure is lacking, reliance is placed on syndromic approach. In view of the limitations of each, there is a compelling need for development of a point of care test (POCT). Aptamers offer such potential. These are short oligonucleotides that bind to its target with high affinity and specificity and therefore can be maneuvred for use in diagnostics. In this study, we performed live cell-SELEX (Systematic Evolution of Ligands by EXponential enrichment) to select 12 single-stranded DNA (ssDNA) aptamers that bind strongly to a cocktail of Neisseria gonorrhoeae strains, with Kd values ranging from 8.58 to 596 nM. Gold nanoparticle (GNP) assay revealed that one of the aptamers, E8 19 was highly specific for Neisseria gonorrhoeae (Kd = 24.5 nM). More importantly, it did not demonstrate any binding to Neisseria meningitidis and commensal Neisseria sp. The identified aptamer holds much promise for the development of a rapid test for diagnosis of gonorrhoea.

Fluorescent nanostructured carbon dot-aptasensor for chlorpyrifos detection: Elucidating the interaction mechanism for an environmentally hazardous pollutant

Chlorpyrifos (CPF) is a commonly used insecticide found in many water sources and is related to several health and environmental effects. Biosensors based on aptamers (single-stranded nucleic acid oligonucleotides) are promising alternatives to achieve the detection of CPF and other pesticides in natural waters. However, several challenges need to be addressed to promote the real application of functional aptasensing devices. In this work, an ssDNA aptamer (S1) is combined with carbon quantum dots (CD) and graphene oxide (GO) to produce a stable fluorescent aptasensor characterized through spectrophotometric and electrophoretic techniques. For a deeper understanding of the system, the mechanism of molecular interaction was studied through docking modeling using free bioinformatic tools like HDOCK, showing that the stem-loops and the higher guanine (G) content are crucial for better interaction. The model also suggests the possibility of generating a truncated aptamer to improve the binding affinity. The biosensor was evaluated for CPF detection, showing a low LOD of 0.01 μg L-1 and good specificity in tap water, even compared to other organophosphates pesticides (OPs) like profenofos. Finally, the recovery of the proposed aptasensor was evaluated in some natural water using spiked samples and compared with UPLC MS-MS chromatography as the gold standard, showing a good recovery above 2.85 nM and evidencing the need of protecting ssDNA aptamers from an erratic interaction with the aromatic groups of dissolved organic matter (humic substances). This work paves the way for a better aptasensors design and the on-site implementation of novel devices for environmental monitoring.

The use of peptides, aptamers, and variable domains of heavy chain only antibodies in tissue engineering and regenerative medicine

Over the years, much research has been focused on the use of small molecules such as peptides or aptamers or more recently on the use of variable antigen-binding domain of heavy chain only antibodies in the field of tissue engineering and regenerative medicine. The use of these molecules originated as an alternative for the larger conventional antibodies, of which most drawbacks are derived from their size and complex structure. In the field of tissue engineering and regenerative medicine, biological functionalities are often conjugated to biomaterials in order to (re-)create an in vivo like situation, especially when bioinert biomaterials are used. Those biomaterials are functionalized with these functionalities for instance for the purpose of cell attachment or cell targeting for targeted drug delivery but also for local enrichment or blocking of ligands such as growth factors or cytokines on the biomaterial surface. In this review, we further refer to peptides, aptamers, and variable antigen-binding domain of heavy chain only antibodies as biological functionalities. Here, we compare these biological functionalities within the field of tissue engineering and regenerative medicine and give an overview of recent work in which these biological functionalities have been explored. We focus on the previously mentioned purposes of the biological functionalities. We will compare structural differences, possible modifications and (chemical) conjugation strategies. In addition, we will provide an overview of biologicals that are, or have been, involved in clinical trials. Finally, we will highlight the challenges of each of these biologicals. STATEMENT OF SIGNIFICANCE: In the field of tissue engineering there is broad application of functionalized biomaterials for cell attachment, targeted drug delivery and local enrichment or blocking of growth factors. This was previously mostly done via conventional antibodies, but their large size and complex structure impose various challenges with respect of retaining biological functionality. Peptides, aptamers and VHHs may provide an alternative solution for the use of conventional antibodies. This review discusses the use of these molecules for biological functionalization of biomaterials. For each of the molecules, their characteristics, conjugation possibilities and current use in research and clinical trials is described. Furthermore, this review sets out the benefits and challenges of using these types of molecules for different fields of application.

Phase Separation of DNA-Encoded Artificial Cells Boosts Signal Amplification for Biosensing

Life-like hierarchical architecture shows great potential for advancing intelligent biosensing, but modular expansion of its sensitivity and functionality remains a challenge. Drawing inspiration from intracellular liquid-liquid phase separation, we discovered that a DNA-encoded artificial cell with a liquid core (LAC) can enhance peroxidase-like activity of Hemin and its DNA G-quadruplex aptamer complex (DGAH) without substrate-selectivity, unlike its gelled core (GAC) counterpart. The LAC is easily engineered as an ultrasensitive biosensing system, benefiting from DNA's high programmability and unique signal amplification capability mediated by liquid-liquid phase separation. As proof of concept, its versatility was successfully demonstrated by coupling with two molecular recognition elements to monitor tumor-related microRNA and profile cancer cell phenotypes. This scalable design philosophy offers new insights into the design of next generation of artificial cells-based biosensors.

An Aptamer-Functionalized DNA Circuit to Establish an Artificial Interaction between T Cells and Cancer Cells

Nongenetic strategies that enable control over the cell-cell interaction network would be highly desired, particularly in T cell-based cancer immunotherapy. In this work, we developed an aptamer-functionalized DNA circuit to modulate the interaction between T cells and cancer cells. This DNA circuit was composed of recognition-then-triggering and aggregation-then-activation modules. Upon recognizing target cancer cells, the triggering strand was released to induce aggregation of immune receptors on the T cell surface, leading to an enhancement of T cell activity for effective cancer eradication. Our results demonstrated the feasibility of this DNA circuit for promoting target cancer cell-directed stimulation of T cells, which, consequently, enhanced their killing effect on cancer cells. This DNA circuit, as a modular strategy to modulate intercellular interactions, could lead to a new paradigm for the development of nongenetic T cell-based immunotherapy.

Aptamer-based Upconversion Fluorescence Sensor for Doxorubicin Detection

Doxorubicin is a common chemotherapeutic drug used to treat a variety of cancers. Monitoring the concentration of doxorubicin in human biological fluids is vital for treatment. In this work, we report an aptamer-functionalized, 808 nm-excited core-shell upconversion fluorescence sensor for specific detection of doxorubicin (DOX). Upconversion nanoparticles and DOX are used as energy donors and energy acceptors respectively. Aptamers immobilized on the surface of upconversion nanoparticles act as the molecular recognition element for DOX. The binding of DOX to the immobilized aptamers results in the fluorescence quenching of the upconversion nanoparticles via a fluorescence resonance energy transfer process. The relative fluorescence intensity exhibits a good linear response to DOX concentration in the range of 0.5 μM to 55 μM with a detection limit of 0.5 μM. The aptasensor displays high specificity and anti-interference against other antibiotics, common ions, and biomolecules owing to strong and specific interactions of aptamers towards DOX. The sensor is further applied for the detection of DOX in urine with spike recoveries of nearly 100%.

Square wave voltammetry based electrochemical determination of affinity of cholesterol triethylene glycol modified DNA-aptamers for protoporphyrin IX

Recent advancement in molecular medicine has seen applications of advanced biotechnology tools such as aptamer technology in therapeutics and diagnostics. Aptamer technology has witnessed various approaches including "Click-Chemistry" towards modifying aptamer structure to improve its potentials, but limited studies have reported the influence of such alteration on aptamer's specificity and affinity for their targets. Here, we utilized square wave voltammetry (SWV) electrochemical sensing based on heme to show the effects of cholesterol-triethylene-glycol (COL-TEG) modification of protoporphyrin-IX DNA-aptamers (OKA_24 and OKA_26) on their affinity for heme. Binding was evaluated by immobilizing 5 μM of heme onto cysteamine-glutaraldehyde-coated gold-electrode to construct electrochemical biosensor. Sensing of native/modified-aptamer was achieved by incubating their varying concentrations (9.76 nM - 10 μM) with heme-coated gold-electrode in HKSCM buffer pH 5, for 15 min. Chloroquine (2.5 μM) and non-binding HPIX-aptamer (2.5 μM) served as controls. Ferrocene was the redox solution used for SWV analysis. Protoporphyrin-IX DNA-aptamers specificity for heme was not tarnish by lipid conjugation. Selective binding of 2.5 μM of COL-TEG-OKA_24 and COL-TEG-OKA_26 to heme induced peak-current reduction by 30.68% and 24% respectively. Incubation of OKA_24 and OKA_26 aptamers produced resistance to current flow through the heme-coated gold-electrode by 23.21% and 14.4 8% respectively. Affinity SWV reveals that cholesterol conjugation decreases the affinity of COL-TEG-OKA_24 (K D = 4 7.13 ± 3.767 nM) and COL-TEG-OKA_24 (K D = 84.6 ± 8.7 nM) by 3- fold. There is a need to check the impact of such alteration on inhibition of heme to hemozoin polymerization, a process mediated by Plasmodium falciparum.

In Situ Self-Assembly of Fluorogenic RNA Nanozipper Enables Real-Time Imaging of Single Viral mRNA Translation

Real-time visualization of individual viral mRNA translation activities in live cells is essential to obtain critical details of viral mRNA dynamics and to detect its transient responses to environmental stress. Fluorogenic RNA aptamers are powerful tools for real-time imaging of mRNA in live cells, but monitoring the translation activity of individual mRNAs remains a challenge due to their intrinsic photophysical properties. Here, we develop a genetically encoded turn-on 3,5-difluoro-4-hydroxybenzylidene imidazolinone (DFHBI)-binding RNA nanozipper with superior brightness and high photostability by in situ self-assembly of multiple nanozippers along single mRNAs. The nanozipper enables real-time imaging of the mobility and dynamic translation of individual viral mRNAs in live cells, providing information on the spatial dynamics and translational elongation rate of viral mRNAs.

Combination of protein and cell internalization SELEX identifies a potential RNA therapeutic and delivery platform to treat EphA2-expressing tumors

The EphA2 receptor tyrosine kinase is overexpressed in most solid tumors and acts as the major driver of tumorigenesis. In this study, we developed a novel approach for targeting the EphA2 receptor using a 2'-fluoro-modified pyrimidine RNA aptamer termed ATOP. We identified the ATOP EphA2 aptamer using a novel bioinformatics strategy that compared aptamers enriched during a protein SELEX using recombinant human EphA2 and a cell-internalization SELEX using EphA2-expressing MDA231 tumor cells. When applied to EphA2-expressing tumor cell lines, the ATOP EphA2 aptamer attenuated tumor cell migration and clonogenicity. In a mouse model of spontaneous metastasis, the ATOP EphA2 aptamer slowed primary tumor growth and significantly reduced the number of lung metastases. The EphA2 ATOP aptamer represents a promising candidate for the development of next-generation targeted therapies that provide safer and more effective treatment of EphA2-overexpressing tumors.

Harnessing aptamers against COVID-19: a therapeutic strategy

The novel coronavirus crisis caused by severe acute respiratory syndrome-coronavirus 2 (SARS-CoV-2) was a global pandemic. Although various therapeutic approaches were developed over the past 2 years, novel strategies with more efficient applicability are required to target new variants. Aptamers are single-stranded (ss)RNA or DNA oligonucleotides capable of folding into unique 3D structures with robust binding affinity to a wide variety of targets following structural recognition. Aptamer-based theranostics have proven excellent capability for diagnosing and treating various viral infections. Herein, we review the current status and future perspective of the potential of aptamers as COVID-19 therapies.

A CRISPR/Cas12a-based fluorescence aptasensor for the rapid and sensitive detection of ampicillin

This study introduces CRISPR/Cas-based aptasensor for the highly sensitive and specific detection of the antibiotic, ampicillin. Ampicillin (AMPI) is a commonly used antibiotic for treating pathogenic bacteria and is additionally added to livestock feed in agriculture. This study can enable early detection of antibiotic residues, prevent their accumulation in the environment, and ensure compliance with food safety regulations. Herein, the aptasensor was developed with the CRISPR/Cas system by utilizing three different ampicillin-specific aptamers, each conjugated with a biotin at the 5'-end. The ssDNA activator was bound to the aptamers through complementary base pairings. The attraction of the aptamers to the ampicillin target released the bound ssDNA, causing the activation of the CRISPR/Cas system. The DNA reporter probe, labelled with Cy3 and a quencher, turns on the fluorescence signal when cleaved by the activated Cas12a through trans-cleavage measured using a fluorescence spectrophotometer at 590 nm. The fluorescence signal was linearly proportional to the ampicillin target concentration with a 0.01 nM limit of detection and a read-out time of 30 min. This aptasensor showed high sensitivity towards ampicillin even in the presence of other antibiotics. The method was also successfully implemented for ampicillin detection in spiked food samples.

Localized surface plasmon resonance biosensor chip surface modification and signal amplifications toward rapid and sensitive detection of COVID-19 infections

We developed a multi-pronged approach to enhance the detection sensitivity of localized surface plasmon resonance (LSPR) sensor chips to detect SARS-CoV-2. To this end, poly(amidoamine) dendrimers were immobilized onto the surface of LSPR sensor chips to serve as templates to further conjugate aptamers specific for SARS-CoV-2. The immobilized dendrimers were shown to reduce surface nonspecific adsorptions and increase capturing ligand density on the sensor chips, thereby improving detection sensitivity. To characterize the detection sensitivity of the surface-modified sensor chips, SARS-CoV-2 spike protein receptor-binding domain was detected using LSPR sensor chips with different surface modifications. The results showed that the dendrimer-aptamer modified LSPR sensor chip exhibited a limit of detection (LOD) of 21.9 pM, a sensitivity that was 9 times and 152 times more sensitive than the traditional aptamer- or antibody-based LSPR sensor chips, respectively. In addition, detection sensitivity was further improved by combining rolling circle amplification product and gold nanoparticles to further amplify the detection signals by increasing both the target mass and plasmonic coupling effects. Using pseudo SARS-CoV-2 viral particles as detection targets, we demonstrated that this combined signal intensification approach further enhanced the detection sensitivity by 10 folds with a remarkable LOD of 148 vp/mL, making it one of the most sensitive SARS-CoV-2 detection assays reported to date. These results highlight the potential of a novel LSPR-based detection platform for sensitive and rapid detection of COVID-19 infections, as well as other viral infections and point-of-care applications.

A novel aptamer-G-quadruplex/hemin self-assembling color system: rapid visual diagnosis of invasive fungal infections

BACKGROUND

The clinical symptoms of invasive fungal infections (IFI) are nonspecific, and early clinical diagnosis is challenging, resulting in high mortality rates. This study reports the development of a novel aptamer-G-quadruplex/hemin self-assembling color system (AGSCS) based on (1 → 3)-β-D-glucans' detection for rapid, specific and visual diagnosis of IFI.

METHODS

We screened high affinity and specificity ssDNA aptamers binding to (1 → 3)-β-D-glucans, the main components of cell wall from Candida albicans via Systematic Evolution of Ligands by EXponential enrichment. Next, a comparison of diagnostic efficiency of AGSCS and the (1 → 3)-β-D-glucans assay ("G test") with regard to predicting IFI in 198 clinical serum samples was done.

RESULTS

Water-soluble (1 → 3)-β-D-glucans were successfully isolated from C. albicans ATCC 10,231 strain, and these low degree of polymerization glucans (< 1.7 kD) were targeted for aptamer screening with the complementary sequences of G-quadruplex. Six high affinity single stranded DNA aptamers (A1, A2, A3, A4, A5 and A6) were found. The linear detection range for (1 → 3)-β-D-glucans stretched from 1.6 pg/mL to 400 pg/mL on a microplate reader, and the detection limit was 3.125 pg/mL using naked eye observation. Using a microplate reader, the sensitivity and specificity of AGSCS for the diagnosis of IFI were 92.68% and 89.65%, respectively, which was higher than that of the G test.

CONCLUSION

This newly developed visual diagnostic method for detecting IFI showed promising results and is expected to be developed as a point-of-care testing kit to enable quick and cost effective diagnosis of IFI in the future.

Advanced cancer targeting using aptamer functionalized nanocarriers for site-specific cargo delivery

The non-specificity of standard anticancer therapies has profound detrimental consequences in clinical treatment. Therapeutic specificity can be precisely achieved using cutting-edge ligands. Small synthetic oligonucleotide-ligands chosen through Systematic evolution of ligands by exponential enrichment (SELEX) would be an unceasing innovation in using nucleic acids as aptamers, frequently referred to as "chemical antibodies." Aptamers act as externally controlled switching materials that can attach to various substrates, for example, membrane proteins or nucleic acid structures. Aptamers pose excellent specificity and affinity for target molecules and can be used as medicines to suppress tumor cell growth directly. The creation of aptamer-conjugated nanoconstructs has recently opened up innovative options in cancer therapy that are more effective and target tumor cells with minor toxicity to healthy tissues. This review focuses on a comprehensive description of the most capable classes of aptamer-tethered nanocarriers for precise recognition of cancer cells with significant development in proficiency, selectivity, and targetability for cancer therapy. Existing theranostic applications with the problems and future directions are also highlighted.

Aptamers against cancer drug resistance: Small fighters switching tactics in the face of defeat

Discovering novel cancer therapies has attracted extreme interest in the last decade. In this regard, multidrug resistance (MDR) to chemotherapies is the primary challenge in cancer treatment. Cancerous cells are growingly become resistant to existing chemotherapeutics by employing diverse mechanisms, highlighting the significance of discovering approaches to overcome MDR. One promising strategy is utilizing aptamers as unique tools to target elements or signalings incorporated in resistance mechanisms or develop active targeted drug delivery systems or chimeras enabling the precise delivery of novel agents to inhibit the conventionally undruggable resistance elements. Further, due to their advantages over their proteinaceous counterparts, particularly antibodies, including improved targeting action, enhanced thermal stability, easier production, and superior tumor penetration, aptamers are emerging and have frequently been considered for developing cancer therapeutics. Here, we highlighted significant chemoresistance pathways and thoroughly discussed using aptamers as prospective tools to surmount cancer MDR.

Aptamer-Based Targeted Protein Degradation

The selective removal of misfolded, aggregated, or aberrantly overexpressed protein plays an essential role in maintaining protein-dominated biological processes. In parallel, the precise knockout of abnormal proteins is inseparable from the accurate identification of proteins within complex environments. Guided by these precepts, small molecules, or antibodies, are commonly used as protein recognition tools for developing targeted protein degradation (TPD) technology. Indeed, TPD has shown tremendous prospects in chronic diseases, rare diseases, cancer research, and other fields. Meanwhile, aptamers are short RNA or DNA oligonucleotides that can bind to target proteins with high specificity and strong affinity. Accordingly, aptamers are actively used in designing and constructing TPD technology. In this perspective, we provide a brief introduction to TPD technology in its current progress, and we summarize its application challenges. Recent advances in aptamer-based TPD technology are reviewed, together with corresponding challenges and outlooks.

Aptamer-based expansion microscopy platform enables signal-amplified imaging of dendritic spines

Super-resolution imaging of dendritic spines (DS) can provide valuable information for mechanistic studies related to synaptic physiology and neural plasticity, but challenged by their small dimension (50-200 nm) below the spatial resolution of conventional optical microscopes. In this work, by combining the molecular recognition specificity of aptamer with high programmability of DNA nanotechnology, we developed an expansion microscopy (ExM) platform for imaging DS with enhanced spatial resolution and amplified signal output. Our results demonstrated that the aptamer probe could specifically bind to DS of primary hippocampal neurons. With physical expansion, the DS structure could be effectively enlarged by 4-5 folds, leading to the generation of more structural information. Meantime, the aptamer binding signal could be readily amplified by the introduction of DNA signal amplification strategy, overcoming the drawback of fluorescence dilution during the ExM treatment. This platform enabled evaluation of ischemia-induced early stroke based on the morphological change of DS, highlighting a promising avenue for studying nanoscale structures in biological systems.

Aptamer-linked photonic crystal hydrogel sensor for rapid point-of-care detection of human immuno-deficiency virus-1 (HIV-1)

The detection of the human immunodeficiency virus-1 (HIV) at an early stage is vital and could be realized through its cell surface glycoprotein-120 (gp120) without virus preprocessing. Here, we present an ssDNA-aptamer-linked photonic crystal (APC) hydrogel sensor for HIV detection which is comprised of photonic crystals (PCs) made of polystyrene nanoparticles embedded in the polyacrylamide hydrogel. ssDNA aptamers specific for gp120 are crosslinked in the hydrogel which can selectively bind to gp120 by hydrogen bonding increasing the PCs particle spacing and swelling of the hydrogel. The binding response can be visually monitored as a color change due to the diffraction of light from PCs and can eventually be measured (1-1000 ng mL^-1 of gp120) and 10⁰ to 10⁸ VP mL^-1 of HIV by the Debye's ring diameter or a UV/Vis spectrometer. APC-hydrogel can be regenerated by Tris-HCl and EDTA washing buffer system. The sensor demonstrates LOD of 7.1 ± 1.55 ng mL^-1 for gp120 and 4 VP mL^-1 for the whole HIV, a rapid response of 5 min, reusability up to 70 % (in fifth use), and recovery of 95.4 ± 0.1 % to 99.0 ± 0.2 % in plasma samples. The sensor is cost-effect and stable compared to antibody-based sensors and can be utilized to develop point-of-care testing (POCT) devices for HIV diagnosis.

Exploring Zr-based Metal-Organic Frameworks as Smart Electrochromic Sensors by Coordination-Driven Surface Engineering

As emerging stimuli-responsive materials, electrochromic metal-organic frameworks (MOFs) are still not utilized in sensing applications due to difficulties in water stability, facile synthesis and functionalization, and efficient translation of specific recognition events. Here, we firstly find that a Zr-based MOF furnished with postsynthetically created viologen-like electron-deficient moiety was electrochromic active. With a coordination-driven surface engineering strategy where phosphate-containing biomolecules are tethered to Zr nodes of the MOF, fine tuning the interface electron transfer was readily achieved, thus benefitting for constructing smart electrochromic sensors through the combination of the sensitivity of electrochemistry with the visuality of colorimetry. Particularly, MOF-coated conductive films enabled label-free detection of phosphoproteins, and aptamer-functionalized ones responded specifically to the target. In two cases distinct color changes allow for visual quantification. This study represents the first example of MOF-based electrochromic sensors developed by an efficient strategy, indicating the generality to electrochromic counterparts for various sensing applications.

Simultaneous Detection of L-Lactate and D-Glucose Using DNA Aptamers in Human Blood Serum

L-lactate is a key metabolite indicative of physiological states, glycolysis pathways, and various diseases such as sepsis, heart attack, lactate acidosis, and cancer. Detection of lactate has been relying on a few enzymes that need additional oxidants. In this work, DNA aptamers for L-lactate were obtained using a library-immobilization selection method and the highest affinity aptamer reached a K_d of 0.43 mM as determined using isothermal titration calorimetry. The aptamers showed up to 50-fold selectivity for L-lactate over D-lactate and had little responses to other closely related analogs such as pyruvate or 3-hydroxybutyrate. A fluorescent biosensor based on the strand displacement method showed a limit of detection of 0.55 mM L-lactate, and the sensor worked in 90 % serum. Simultaneous detection of L-lactate and D-glucose in the same solution was achieved. This work has broadened the scope of aptamers to simple metabolites and provided a useful probe for continuous and multiplexed monitoring.

Allosteric Regulation of Aptamer Affinity through Mechano-Chemical Coupling

The capacity to precisely modulate aptamer affinity is important for a wide variety of applications. However, most such engineering strategies entail laborious trial-and-error testing or require prior knowledge of an aptamer's structure and ligand-binding domain. We describe here a simple and generalizable strategy for allosteric modulation of aptamer affinity by employing a double-stranded molecular clamp that destabilizes aptamer secondary structure through mechanical tension. We demonstrate the effectiveness of the approach with a thrombin-binding aptamer and show that we can alter its affinity by as much as 65-fold. We also show that this modulation can be rendered reversible by introducing a restriction enzyme cleavage site into the molecular clamp domain and describe a design strategy for achieving even more finely-tuned affinity modulation. This strategy requires no prior knowledge of the aptamer's structure and binding mechanism and should thus be generalizable across aptamers.

Ligand Dilution Analysis Facilitates Aptamer Binding Characterization at the Single-Molecule Level

Cell-specific aptamers offer a powerful tool to study membrane receptors at the single-molecule level. Most target receptors of aptamers are highly expressed on the cell surface, but difficult to analyze in situ because of dense distribution and fast velocity. Therefore, we herein propose a random sampling-based analysis strategy termed ligand dilution analysis (LDA) for easily implemented aptamer-based receptor study. Receptor density on the cell surface can be calculated based on a regression model. By using a synergistic ligand dilution design, colocalization and differentiation of aptamer and monoclonal antibody (mAb) binding on a single receptor can be realized. Once this is accomplished, precise binding site and detailed aptamer-receptor binding mode can be further determined using molecular docking and molecular dynamics simulation. The ligand dilution strategy also sets the stage for an aptamer-based dynamics analysis of two- and three-dimensional motion and fluctuation of highly expressed receptors on the live cell membrane.

Attomolar detection of hepatitis C virus core protein powered by molecular antenna-like effect in a graphene field-effect aptasensor

Biosensors based on graphene field-effect transistors have become a promising tool for detecting a broad range of analytes. However, their performance is substantially affected by the functionalization protocol. In this work, we use a controlled in-vacuum physical method for the covalent functionalization of graphene to construct ultrasensitive aptamer-based biosensors (aptasensors) able to detect hepatitis C virus core protein. These devices are highly specific and robust, achieving attomolar detection of the viral protein in human blood plasma. Such an improved sensitivity is rationalized by theoretical calculations showing that induced polarization at the graphene interface, caused by the proximity of covalently bound molecular probe, modulates the charge balance at the graphene/aptamer interface. This charge balance causes a net shift of the Dirac cone providing enhanced sensitivity for the attomolar detection of the target proteins. Such an unexpected effect paves the way for using this kind of graphene-based functionalized platforms for ultrasensitive and real-time diagnostics of different diseases.