Synthesis, Characterization, and Self-Assembly of Pencil-Shaped CoO Nanorods

Direction control of oriented self-assembly for 1D, 2D, and 3D microarrays of anisotropic rectangular nanoblocks

Micrometric linear chains (1D arrays), monolayers (2D arrays), and superstructures (3D arrays) of anisotropic Mn3O4 nanocuboids were selectively produced by oriented self-assembly through evaporation of a dispersion. The 1D arrays were basically formed on a substrate via oriented self-assembly of the rectangular crystals in the ⟨100⟩ direction. The 2D and 3D microarrays were obtained by adjusting the particle concentration of the dispersion. The [001] direction of tetragonal crystal was controlled to be parallel and perpendicular to the substrate by changing the polarity of the medium.

[100] Directed Cu-doped h-CoO nanorods: elucidation of the growth mechanism and application to lithium-ion batteries

Thermal decomposition of Co(acac)(3) and Cu(acac)(2) in benzylamine leads to the formation of [100] directed Cu-doped h-CoO nanorods, which are very stable in an aqueous solution. The formation mechanism of the [100] directed Cu-doped h-CoO nanorods is fully elucidated by using first-principles calculations, demonstrating that Cu-doping not only changes the growth direction but also enhances the stability of the nanorods significantly. Evaluation of the electrochemical performance of Cu-doped h-CoO nanorods shows high initial Coulombic efficiency and ultrahigh capacity with excellent cycling performance, indicating their suitability as an anode material for next generation lithium-ion batteries.

CoFe2O4-TiO2 and CoFe2O4-ZnO thin film nanostructures elaborated from colloidal chemistry and atomic layer deposition

CoFe(2)O(4)-TiO(2) and CoFe(2)O(4)-ZnO nanoparticles/film composites were prepared from directed assembly of colloidal CoFe(2)O(4) in a Langmuir-Blodgett monolayer and atomic layer deposition (ALD) of an oxide (TiO(2) or ZnO). The combination of these two methods permits the use of well-defined nanoparticles from colloidal chemistry, their assembly on a large scale, and the control over the interface between a ferrimagnetic material (CoFe(2)O(4)) and a semiconductor (TiO(2) or ZnO). Using this approach, architectures can be assembled with a precise control from the Angstrom scale (ALD) to the micrometer scale (Langmuir-Blodgett film). The resulting heterostructures present well-calibrated thicknesses. Electron microscopy and magnetic measurement studies give evidence that the size of the nanoparticles and their intrinsic magnetic properties are not altered by the various steps involved in the synthesis process. Therefore, the approach is suitable to obtain a layered composite with a quasi-monodisperse layer of ferrimagnetic nanoparticles embedded in an ultrathin film of semiconducting material.

Organic phase synthesis of monodisperse iron oxide nanocrystals using iron chloride as precursor

Monodisperse iron oxide nanocrystals were synthesized by a simplified method using iron chloride as precursor. In the presence of Cl ions, the as-produced iron oxide nanocrystals preferred a cubic shape with {100} facets exposed. The function of halogens including Cl and Br ions on stabilizing {100} facets of spinel structured iron oxides, rather than the regulation of thermolysis kinetics and surfactants, was found influential on the shape control of nanocubes in this organic phase approach. The synthesis can be also extended for cobalt ferrite nanocubes and cobalt oxide polyhedrons.

Graphitically encapsulated cobalt nanocrystal assemblies

Graphitically encapsulated cobalt nanocrystal assemblies are chemically prepared by one-pot reaction at >380 degrees C followed by a reversed etching process to produce porous graphitic structure for revealing their self-assembling nature.

Colloidal polymerization of polymer-coated ferromagnetic nanoparticles into cobalt oxide nanowires

The preparation of polystyrene-coated cobalt oxide nanowires is reported via the colloidal polymerization of polymer-coated ferromagnetic cobalt nanoparticles (PS-CoNPs). Using a combination of dipolar nanoparticle assembly and a solution oxidation of preorganized metallic colloids, interconnected nanoparticles of cobalt oxide spanning micrometers in length were prepared. The colloidal polymerization of PS-CoNPs into cobalt oxide (CoO and Co(3)O(4)) nanowires was achieved by bubbling O(2) into PS-CoNP dispersions in 1,2-dichlorobenzene at 175 degrees C. Calcination of thin films of PS-coated cobalt oxide nanowires afforded Co(3)O(4) metal oxide materials. Transmission electron microscopy (TEM) revealed the formation of interconnected nanoparticles of cobalt oxide with hollow inclusions, arising from a combination of dipolar assembly of PS-CoNPs and the nanoscale Kirkendall effect in the oxidation reaction. Using a wide range of spectroscopic and electrochemical characterization techniques, we demonstrate that cobalt oxide nanowires prepared via this novel methodology were electroactive with potential applications as nanostructured electrodes for energy storage.

Fabrication of Mn-ferrite nanoparticles from MnO colloids

The reaction mechanism for conversion of MnO nanoparticles to Mn-ferrite nanoparticles was studied, which involved sequential consumption of MnO and the growth of ferrite. The method could be applied to other ferrite nanoparticles including cobalt ferrite.

Preparation of Monodisperse Iron Oxide Nanoparticles via the Synthesis and Decomposition of Iron Fatty Acid Complexes

Iron fatty acid complexes (IFACs) are prepared via the dissolution of porous hematite powder in hot unsaturated fatty acid. The IFACs are then decomposed in five different organic solvents under reflux conditions in the presence of the respective fatty acid. The XRD analysis results indicate that the resulting NPs comprise a mixture of wustite, magnetite, and maghemite phases. The solvents with a higher boiling point prompt the formation of larger NPs containing wustite as the major component, while those with a lower boiling point produce smaller NPs with maghemite as the major component. In addition, it is shown that unstable NPs with a mixed wustite-magnetite composition can be oxidized to pure maghemite by extending the reaction time or using an oxidizing agent.

Formation of highly ordered rectangular nanoparticle superlattices by the cooperative self-assembly of nanoparticles and fatty molecules

We demonstrate the formation of highly ordered twofold symmetric rectangular nanoparticle superlattices by the slow evaporation of solvent from colloidal dispersions of oleic acid/oleylamine-coated Fe3O4 nanoparticles on a water surface. These superlattices covered regions of micrometers in size without any noticeable disorders or defects, with size controlled by the amount of oleic acid added to the colloidal dispersions. The superlattices were transformed into arrays of nanowires by subsequent calcination. The peculiar nanoparticle assemblies are discussed in terms of the cooperative self-assembly of nanoparticles and fatty molecules during the slow evaporation of solvent.

Colloidal chemical synthesis and formation kinetics of uniformly sized nanocrystals of metals, oxides, and chalcogenides

Nanocrystals exhibit interesting electrical, optical, magnetic, and chemical properties not achieved by their bulk counterparts. Consequently, to fully exploit the potential of nanocrystals, the synthesis of nanocrystals must focus on producing materials with uniform size and shape. Top-down physical processes can produce large quantities of nanocrystals, but controlling the size is difficult with these methods. On the other hand, colloidal chemical synthetic methods can produce uniform nanocrystals with a controlled particle size. In this Account, we present our synthesis of uniform nanocrystals of various shapes and materials, and we discuss the kinetics of nanocrystal formation. We employed four different synthetic approaches including thermal decomposition, nonhydrolytic sol-gel reactions, thermal reduction, and use of reactive chalcogen reagents. We synthesized uniform oxide nanocrystals via heat-up methods. This method involved slowly heat-up reaction mixtures composed of metal precursors, surfactants, and solvents from room temperature to high temperature. We then held reaction mixtures at an aging temperature for a few minutes to a few hours. Kinetics studies revealed a three-step mechanism for the synthesis of nanocrystals through the heat-up method with size distribution control. First, as metal precursors thermally decompose, monomers accumulate. At the aging temperature, burst nucleation occurs rapidly; at the end of this second phase, nucleation stops, but continued diffusion-controlled growth leads to size focusing to produce uniform nanocrystals. We used nonhydrolytic sol-gel reactions to synthesize various transition metal oxide nanocrystals. We employed ester elimination reactions for the synthesis of ZnO and TiO(2) nanocrystals. Uniform Pd nanoparticles were synthesized via a thermal reduction reaction induced by heating up a mixture of Pd(acac)(2), tri-n-octylphosphine, and oleylamine to the aging temperature. Similarly, we synthesized nanoparticles of copper and nickel using metal(II) acetylacetonates. Ni/Pd core/shell nanoparticles were synthesized by simply heating the reaction mixture composed of acetylacetonates of nickel and palladium. Using alternative chalcogen reagents, we synthesized uniform nanocrystals of various metal chalcogenides. Uniform nanocrystals of PbS, ZnS, CdS, and MnS were obtained by heating reaction mixtures composed of metal chlorides and sulfur dissolved in oleylamine. In the future, a detailed understanding of nanocrystal formation kinetics and synthetic chemistry will lead to the synthesis of uniform nanocrystals with controlled size, shape, and composition. In particular, the synthesis of uniform nanocrystals of doped materials, core/shell materials, and multicomponent materials is still a challenge. We expect that these uniformly sized nanocrystals will find important applications in areas including information technology, biomedicine, and energy/environmental technology.

Simple and generalized synthesis of oxide-metal heterostructured nanoparticles and their applications in multimodal biomedical probes

Heterostructured nanoparticles composed of metals and Fe3O4 or MnO were synthesized by thermal decomposition of mixtures of metal-oleate complexes (for the oxide component) and metal-oleylamine complexes (for the metal component). The products included flowerlike-shaped nanoparticles of Pt-Fe3O4 and Ni-Fe3O4 and snowmanlike-shaped nanoparticles of Ag-MnO and Au-MnO. Powder X-ray diffraction patterns showed that these nanoparticles were composed of face-centered cubic (fcc)-structured Fe3O4 or MnO and fcc-structured metals. The relaxivity values of the Au-MnO and Au-Fe3O4 nanoparticles were similar to those of the MnO and Fe3O4 nanoparticles, respectively. Au-Fe3O4 heterostructured nanoparticles conjugated with two kinds of 12-base oligonucleotide sequences were able to sense a complementary 24-mer sequence, causing nanoparticle aggregation. This hybridization-mediated aggregation was detected by the overall size increase indicated by dynamic light scattering data, the red shift of the surface plasmon band of the Au component, and the enhancement of the signal intensity of the Fe3O4 component in T2-weighted magnetic resonance imaging.

Functionalization of carbon nanotubes with magnetic nanoparticles: general nonaqueous synthesis and magnetic properties

A novel approach has been developed to synthesize magnetic nanoparticle and carbon nanotube (CNT) core-shell nanostructures, such as CoO/CNTs and Mn(3)O(4)/CNTs, by the nonaqueous solvothermal treatment of metal carbonyl on CNT templates using hexane as the solvent. The morphological and structural characterizations indicate that numerous cubic CoO or tetragonal Mn(3)O(4) nanoparticles are deposited on the surfaces of the CNTs to form CNT-based core-shell nanostructures. It is revealed that the hydrophobic interaction between nanoparticles and CNTs in hexane plays the critical role for the formation of CNT-based core-shell nanostructures. A physical property measurement system (PPMS-9, Quantum Design) analysis indicates that the CoO/CNT core-shell nanostructures show weak ferromagnetic performance at 300 K due to the ferromagnetic Co clusters and the uncompensated surface spin states, while the Mn(3)O(4)/CNT core-shell nanostructures display ferromagnetic behavior at low temperature (34.5 K), which transforms into paramagnetic behavior with increasing temperature.

Room temperature ferromagnetism in CoO nanoparticles obtained from sonochemically synthesized precursors

In this paper we report the magnetic properties of nanosized CoO particles, prepared from sonochemically synthesized precursors and characterized using x-ray diffraction (XRD), conventional transmission electron microscopy (TEM) and scanning tunneling electron microscopy combined with energy dispersive x-ray analysis (STEM-EDX) techniques. The nanoparticles were faceted and the sizes varied between 30 and 60 nm depending on the time of annealing. They were stable even in the absence of any organic coating on them. Magnetic measurements reveal the presence of ferromagnetic interactions at low temperatures in the CoO nanoparticles synthesized after 2 and 4 h of annealing of the sonochemically synthesized precursor under nitrogen. However, after 6 h of annealing, the nanoparticles show hysteresis not only at low temperatures (1.5 K) but also at higher temperatures (100 K and room temperature), indicating the presence of room temperature ferromagnetism.