3,3′-Dinitroamino-4,4′-azoxyfurazan and Its Derivatives: An Assembly of Diverse N–O Building Blocks for High-Performance Energetic Materials

Learning to fly: thermochemistry of energetic materials by modified thermogravimetric analysis and highly accurate quantum chemical calculations

The standard state enthalpy of formation and the enthalpy of sublimation are essential thermochemical parameters determining the performance and application prospects of energetic materials (EM). Direct experimental measurements of these properties are complicated by low volatility and high heat release in bomb calorimetry experiments. As a result, the uncertainties in the reported enthalpies of formation for a number of even well-known CHNO-containing compounds might amount up to tens kJ mol-1, while for some novel high-nitrogen molecules they reach even hundreds of kJ mol-1. The present study reports a facile approach to determining the solid-state formation enthalpies comprised of complementary high-level quantum chemical calculations of the gas-phase thermochemistry and advanced thermal analysis techniques yielding sublimation enthalpies. The thermogravimetric procedure for the measurement of sublimation enthalpy was modified by using low external pressures (down to 0.2 Pa). This allows for observing sublimation/vaporization instead of thermal decomposition of the compounds studied. Extensive benchmarking on nonenergetic and energetic compounds reveals the average and maximal absolute errors of the sublimation enthalpies of 3.3 and 11.0 kJ mol-1, respectively. The comparison of the results with those obtained from the widely used Trouton-Williams empirical equation shows that the latter underestimates the sublimation enthalpy up to 140 kJ mol-1. Therefore, we performed a reparametrization of the latter equation with simple chemical descriptors that reduces the mean error down to 30 kJ mol-1. Highly accurate multi-level procedures W2-F12 and/or W1-F12 in conjunction with the atomization energy approach were used to calculate theoretically the gas-phase formation enthalpies. In several cases, the DLPNO-CCSD(T) enthalpies of isodesmic reactions were also employed to obtain the gas-phase thermochemistry for medium-sized important EMs. Combining the obtained thermochemical properties, we determined the solid-state enthalpies of formation for nearly 60 species containing various important explosophoric groups, from common nitroaromatics, nitroethers, and nitramines to novel nitrogen-rich heterocyclic species (e.g., the derivatives of pyrazole, tetrazole, furoxan, etc.). The large-scale benchmarking against the available experimental solid-state enthalpies of formation yielded the maximal inaccuracy of the proposed method of 25 kJ mol-1.

3-R-4-(5-Methyleneazide-1,2,4-oxadiazol-3-yl)furazan and its ionic salts as low-sensitivity and high-detonation energetic materials

3-R-4-(5-Methyleneazide-1,2,4-oxadiazol-3-yl)furazan compounds as low-sensitivity and high-detonation energetic materials.

Hydrogen bond system generated by nitroamino rearrangement: new character for designing next generation energetic materials

Hydrogen bond systems stabilize molecules and shorten intermolecular distances to give higher density and lower sensitivity.

Theoretical studies on oxadiazole-based layer stacking nitrogen-rich high-performance insensitive energetic materials

A series of energetic compounds derived from substituted oxadiazole molecules which were theoretically proved to have π-π stacking crystal structure using NIC method and QTAIM theory were designed and investigated theoretically as novel high-performance insensitive energetic materials. The heats of formation (HOFs) and detonation parameters were predicted based on Kamlet-Jacobs equations and Born-Haber cycle. All energetic compounds and derivatives were calculated at DFT-B3PW91/6-31G++(d,p) level and exhibited ideal oxygen balance (OB%) (- 19.50~15.68), positive heats of formation (424.0~957.4 kJ/mol), and pleasant crystal density (1.707~1.901 g/cm³). The predicted results revealed that detonation performances of some designed molecules are equal to traditional energetic materials while they are more stable and insensitive that can be considered to have potential synthesis and application value. Graphical abstract BRIEFS Three energetic molecules that proved may have a π-π stacking crystal structure and its derivatives were designed and investigated theoretical as novel high-performance insensitive energetic materials. The most of compounds exhibited positive solid phase heat of formation, idea oxygen balance and structural stability.

Derivatives of 3,6-Bis(3-aminofurazan-4-ylamino)-1,2,4,5-tetrazine: Excellent Energetic Properties with Lower Sensitivities

To find a balance between energy and safety, a series of compounds based on azo-, azoxy-, 1,4,2,5-dioxadiazene-, and 3,6-diamino-1,2,4,5-tetrazine-bridged bis(aminofurazan) were designed and synthesized. These compounds were analyzed by nitro group charges (Q_nitro) and bond dissociation energy (BDE) calculations, which are related to sensitivity and stability. Based on the calculated results, derivatives of 3,6-bis(3-aminofurazan-4-ylamino)-1,2,4,5-tetrazine have the largest values for -Q_nitro and BDE of all of the bis(aminofurazan) compounds. This shows that compounds based on 3,6-bis(3-aminofurazan-4-ylamino)-1,2,4,5-tetrazine have the lowest sensitivities and best stabilities, which has been substantiated by experiments. Additionally, their explosive properties remain essentially competitive with compounds based on azo-, azoxy-, and 1,4,2,5-dioxadiazene-bridged bis(aminofurazan). Hirshfeld surface calculations were also performed to better understand the relationship between the molecular structure and stability/sensitivity. This work highlights the value of 3,6-diamino-1,2,4,5-tetrazine as a linker to achieve good balance between safety and energy.

Computational study of energetic derivatives of 3,3′-bridged ditriazoles

A series of energetic bridged ditriazole was designed by incorporating different bridges and substituents into 4H-1,2,4-triazole ring. The geometrical structures, heats of formation, detonation properties, electronic structures, thermodynamic properties, free spaces, impact sensitivities, and thermal stabilities of the designed compounds were evaluated by employing density functional theory. The results elucidate that the –N3 substituent and –N=N– bridge can sufficiently increase their heats of formation. The calculated values of detonation properties show that –NF2, –ONO2, –O–, and –N=N(O)– are useful structural fragments to improve their detonation performance. The incorporation of the oxy (–O–) bridge increases their HOMO–LUMO energy gaps. An analysis of h50 values indicate that most of the designed compounds are less sensitive. The N(ring)-NO2 bond in the majority of the derivatives may be a possible trigger bond in thermal decomposition process. The incorporation of –CH2–CH2– and –O– is helpful to enhance their thermal stabilities. Based on appropriate thermal stabilities and superb detonation properties, six compounds were screened as promising high energy density compounds.

Kinetics and mechanism of decomposition induced by solvent evolution in ICM-101 solvates: solvent-evolution-induced low-temperature decomposition

[2,2'-Bi(1,3,4-oxadiazole)]-5,5'-dinitramide (ICM-101), a high-energy-density material, was reported in recent years. ICM-101 is the first energetic material with the 2,2'-bi(1,3,4-oxadiazole) structure as the main ring structure. The molecular structure of ICM-101 shows excellent planar characteristics, providing a new option for the design of high-energy-density materials. However, during crystal preparation, ICM-101 easily interacts with solvents and forms the corresponding solvates. Interestingly, during thermal decomposition, when the solvent escapes from ICM-101 solvates, it induces the decomposition of ICM-101. In this study, the decomposition of ICM-101 induced by solvent evolution was evaluated in detail, and the decomposition kinetic equation was established. The mechanism of solvent-evolution-induced decomposition in ICM-101 solvates was further studied, and it was found that solvent evolution might produce defects in the crystals of ICM-101 solvates, and induce the decomposition of ICM-101 on the defects.

Combining the furoxanylhydrazone framework with various energetic functionalities to prepare new insensitive energetic materials with 3D-cube layer stacking

We provide a new series of energetic salts and neutral compounds containing furoxanylhydrazone with 3D-cube layer stacking.

Modification of crystalline energetic salts through polymorphic transition: enhanced crystal density and energy performance

We presented a detailed investigation of polymorphic transition of energetic salts and explored a new path for modifying crystalline energetic salts.

A novel energetic framework combining the advantages of furazan and triazole: a design for high-performance insensitive explosives

Combining energetic furazan and triazole rings to achieve a series of high performance and insensitive energetic compounds.

An efficient strategy for the preparation of insensitive energetic materials: intramolecular cyclization of picrylhydrazone into an indazole derivative

An efficient method to acheive a balance of energy and sensitivity through the intramolecular cyclization reaction of picrylhydrazone into an indazole derivative.

Fluorescent "Turn-on" Sensing Based on Metal-Organic Frameworks (MOFs)

Metal-organic frameworks (MOFs) have evolved as an exciting class of materials in the domain of porous materials. The unique features of these materials arise from the combined properties of metal ions/clusters and organic struts which form the building blocks of these fascinating architectures. Among other multifarious applications, MOFs have shown tremendous applications as sensory materials for a wide variety of species. The signal transduction induced mechanism in these confined nanospaces generate optical output in response to a particular analyte which can be detected by wide variety of detection techniques. Fluorometric methods of sensing is one of widely studied method over past few decades. MOF-based fluorometric detection is a key research theme developed over the past few years. In this review, we give a brief overview of the recent developments of MOFs as "turn-on" sensors for a wide range of analytes (viz. cations, anions, volatile organic compounds (VOCs), etc.).

Predictions on High-Power Trivalent Metal Pentazolate Salts

High-energy-density materials (HEDMs) have been intensively studied for their significance in fundamental sciences and practical applications. Here, using the molecular crystal structure search method based on first-principles calculations, we have predicted a series of metastable energetic trivalent metal pentazolate salts MN₁₅ (M= Al, Ga, Sc, and Y). These compounds have high energy densities, with the highest nitrogen content among the studied nitrides so far. Pentazolate N₅^- molecules stack up face-to-face and form wave-like patterns in the C222₁ and Cc symmetries. The strong covalent bonding and very weak noncovalent interactions with nonbonded overlaps coexist in these ionic-like structures. We find MN₁₅ molecular structures are mechanically stable up to high temperature (∼1000 K) and ambient pressure. More importantly, these trivalent metal pentazolate salts have high detonation pressure (∼80 GPa) and velocity (∼12 km/s). Their detonation pressures exceeding that of TNT and HMX make them good candidates for high-brisance green energetic materials.

Combinations of furoxan and 1,2,4-oxadiazole for the generation of high performance energetic materials

Several energetic materials, which are composed of furoxan and 1,2,4-oxadiazole backbones, were synthesized by nitrating 3,3'-bis(5-amino-1,2,4-oxadiazol-3-yl)-4,4'-azofuroxan (2) under 100 wt% HNO3 or 100 wt% HNO3/Ac2O followed by a cation metathesis. All synthesized compounds were fully characterized by multinuclear NMR spectroscopy, IR spectroscopy, and elemental analysis, while 3,3'-bis(1,2,4-oxadiazol-5(4H)-one-3-yl)-4,4'-azofuroxan (3) and diammonium 3,3'-bis(5-nitramino-1,2,4-oxadiazole-3-yl)-4,4'-azofuroxan (4a) were confirmed by single crystal X-ray diffraction. The physicochemical and energetic properties of these compounds including density, thermal stability and sensitivity were investigated. Compounds 3 and 4 have high densities (3: 1.90 g cm-3, 4: 1.92 g cm-3), which are comparable to that of HMX (1.91 g cm-3). All energetic compounds show relatively high calculated heat of formation in the range from 504.79 kJ mol-1 to 1405.62 kJ mol-1. Their detonation properties were evaluated by EXPLO5 code using the measured density and calculated heat of formation. Among them, compounds 3 and 4 have good detonation performance (3: D = 8891 m s-1, P = 34.7 GPa, 4: D = 9505 m s-1, P = 41.3 GPa) and acceptable sensitivities (3: IS = 10 J, 4: IS = 4 J), which indicate their potential applications as high-performance energetic materials.

1,2,4-Oxadiazole-Bridged Polynitropyrazole Energetic Materials with Enhanced Thermal Stability and Low Sensitivity

A family of mono or di(1,2,4-oxadiazole)-bridged polynitropyrazole derivatives with C-nitro/N-nitro functionalities is reported. All compounds were fully characterized by IR, NMR (¹ H, ¹³ C), elemental analysis and differential scanning calorimetry (DSC). The solid-state structure features were further investigated with X-ray diffraction. Of these, compounds 3,5-bis(3,4-dinitro-1H-pyrazol-5-yl)-1,2,4-oxadiazole (3 a) and 5,5'-bis(3,4-dinitro-1H-pyrazol-5-yl)-3,3'-bi(1,2,4-oxadiazole) (3 b) possess high thermal stability (3 a: T_dec =274 °C; 3 b: T_dec =272 °C), sensitivity (IS >30 J, FS >360 N) and comparable detonation properties (3 a: D_v =8741 m s^-1 , P=34.0 GPa; 3 b: D_v =8685 m s^-1 , P=33.4 Gpa) to RDX. In addition, 3,5-bis(4-nitro-1H-pyrazol-3-yl)-1,2,4-oxadiazole (4 a) and 5,5'-bis(4-nitro-1H-pyrazol-3-yl)-3,3'-bi(1,2,4-oxadiazole) (4 b) have high decomposition temperature (4 a: T_dec =314 °C; 4 b: T_dec =317 °C), low sensitivity (IS >40 J; FS>360 N) and superior detonation performances (4 a: D_v =8027 m s^-1 , P=26.4 GPa; 4 b: D_v =7991 m s^-1 , P=25.2 Gpa) than conventional heat-resistant explosive hexanitrostilbene (HNS: T_dec =318 °C; IS=5 J; FS=240 N; D_v =7612 m s^-1 , P=24.3 GPa), thus suggesting their potential application as heat-resistant explosives.

Nitramino-furazan-functionalized fused high-nitrogen backbones as energetic materials with high detonation performance and good molecular stabilities

A promising fused energetic compound is investigated through the cooperation between nitramino-1,2,5-oxadiazole and fused high-nitrogen backbone.

From BTO2− to HBTO− insensitive energetic salt: a route to boost energy

A promising strategy was utilized to boost the detonation performance of insensitive energetic salts.

TACOT-derived new nitrogen rich energetic compounds: synthesis, characterization and properties

Two novel TACOT derivatives, compounds 7 and 8, were synthesized and characterized. Compound 7 is suggested as a heat-resistant explosive, and compound 8 is a potential nitrogen-rich high energetic material with excellent positive heat of formation of 1053 kJ mol⁻¹.

Crystal structures, thermodynamics and accelerating thermal decomposition of RDX: two new energetic coordination polymers based on a Y-shaped ligand of tris(5-aminotetrazole)triazine

Two new energetic coordination polymers were prepared under hydrothermal condition. They have good detonation velocity, detonation pressure and effective acceleration effect toward the thermal decomposition of RDX (1,3,5-trinitro-1,3,5-triazinane).

Host–guest energetic materials constructed by incorporating oxidizing gas molecules into an organic lattice cavity toward achieving highly-energetic and low-sensitivity performance

Powerful oxidizer N₂O was incorporated into an organic lattice cavity through aeration crystallization, and smart host–guest energetic materials with highly-energetic and low-sensitivity performance were obtained.

Optimizing the molecular structure and packing style of a crystal by intramolecular cyclization from picrylhydrazone to indazole

Crystal engineering has prompted the development of energetic materials in recent years.

Molecule design and properties of bridged 2,2-bi(1,3,4-oxadiazole) energetic derivatives

A series of bridged 2,2-bi(1,3,4-oxadiazole) energetic derivatives were designed and their geometrical structures, electronic structures, heats of formation, detonation properties, thermal stabilities and thermodynamic properties were fully investigated by density functional theory. The results showed that the –N₃ group and the –N– bridge play an important role in improving heats of formation of these 2,2-bi(1,3,4-oxadiazole) derivatives. The calculated detonation properties indicated that the –NF₂ group and the –N– bridge were very useful for enhancing the heats of detonation, detonation velocities and detonation pressures. Twenty-four compounds were found to possess equal or higher detonation properties than those of RDX, while 14 compounds had equal or higher detonation properties than those of HMX. The analysis of the bond-dissociation energies suggested that the –CN group was the effective structural unit for increasing the thermal stabilities while the –NHNH₂ group decreased these values. Overall, taking both the detonation properties and thermal stabilities into consideration, 22 compounds (A4, A6, A8, A9, B4, B9, C2, C3, C4, C5, C7, C, C9 D4, D8, D9, E9, F4, F9, G9, H4 and H9) were selected as the potential candidates for high-energy-density materials.

A series of bridged 2,2-bi(1,3,4-oxadiazole) energetic derivatives were theoretically designed and investigated.

5-(4-Azidofurazan-3-yl)-1-hydroxytetrazole and its derivatives: from green primary to secondary explosives

These new high-nitrogen-content azidofurazan compounds show potential for use as next-generation green primary and secondary explosives.

Energetic transition metal salts of 5,5′-dinitramino-3,3′-methylene-1H-1,2,4-bistriazole: syntheses, structures and properties

Five energetic transition metal salts based on H₂DNAMT were synthesized. Meanwhile, H₂DNAMT was oxidized to H₂BNATO due to Fe³⁺ in [Fe(BNATO)(H₂O)₄]·2H₂O. All of the metal salts exhibit comparable thermal stability and insensitivity.

A kinetically persistent isomer found for pentazole: a global potential energy surface survey

After the pentazole with a 103-year-old research history, the second N₅R isomer with reasonable kinetic stability was found computationally.

Synthesis and performance study of methylene-bridged bis(nitramino-1,2,4-oxadiazole) and its energetic salts

A series of new energetic compounds based on methylene-bridged bis(nitramino-1,2,4-oxadiazole) was synthesized through a simple, safe and efficient route and fully characterized.