Single-Atom Co–N4 Electrocatalyst Enabling Four-Electron Oxygen Reduction with Enhanced Hydrogen Peroxide Tolerance for Selective Sensing

Mass Production of Pt Single-Atom-Decorated Bismuth Sulfide for n-Type Environmentally Friendly Thermoelectrics

Single-atom materials are widely explored in catalysis, batteries, sensors, etc. However, limited by mass production and centimeter-scale assembly, they are rarely studied in thermoelectrics. Herein, we demonstrate a solvothermal synthesis assisted by a syringe-pump method to yield Bi₂S₃-supported Pt single-atom materials (Bi₂S₃-Pt₁) at a 10 g scale. Different from Pt_n clusters, Pt₁ single atoms can increase carrier concentration at a high doping efficiency and provide a unique atomic environment to enhance carrier mobility, and an enlarged effective mass leads to an enhanced Seebeck coefficient. As a result, a high power factor (348 μW m^-1 K^-2) is achieved at 823 K. Benefiting from the scattering of phonons by Pt₁ atomic sites, a minimum thermal conductivity of 0.37 W m^-1 K^-1 is achieved. Consequently, the Bi₂S₃-0.5 wt % Pt₁ realizes a record-high zT of ∼0.75 at 823 K, being among the best in the state-of-the-art n-type environmentally friendly metal sulfides. The enhancement of the carrier mobility and suppression of the thermal conduction by the unique Pt₁ single atoms will inspire various fields, as exemplified by electronic devices and thermal management.

Metal-metal interactions in correlated single-atom catalysts

Single-atom catalysts (SACs) include a promising family of electrocatalysts with unique geometric structures. Beyond conventional ones with fully isolated metal sites, an emerging class of catalysts with the adjacent metal single atoms exhibiting intersite metal-metal interactions appear in recent years and can be denoted as correlated SACs (C-SACs). This type of catalysts provides more opportunities to achieve substantial structural modification and performance enhancement toward a wider range of electrocatalytic applications. On the basis of a clear identification of metal-metal interactions, this review critically examines the recent research progress in C-SACs. It shows that the control of metal-metal interactions enables regulation of atomic structure, local coordination, and electronic properties of metal single atoms, which facilitate the modulation of electrocatalytic behavior of C-SACs. Last, we outline directions for future work in the design and development of C-SACs, which is indispensable for creating high-performing new SAC architectures.

Tafel Analysis Guided Optimization of ZnNP-O-C Catalysts for the Selective 2-Electron Oxygen Reduction Reaction in Neutral Media

The lack of characterizations of the adsorption capability toward intermediates during reactions causes difficulties in determining the structural optimization principle of the catalysts for the 2-electron oxygen reduction reaction (2e^- ORR). Here, a Tafel-θ method is proposed to evaluate the surface coverage (θ) of important intermediates (*OOH and *OH) on the material surface and further help optimize the catalyst. With the assistance of Tafel-θ analysis, a Zn nanoparticle incorporated oxygen-doped carbon (Zn_NP-O-C) catalyst with high 2e^- ORR performance (onset of ∼0.57 V and selectivity of >90.4%) in neutral media was achieved. Both the theoretical calculation and characterization results are consistent with the Tafel-θ deduction, revealing that an appropriate ratio of Zn nanoparticles and bridging O can optimize the *OOH adsorption/desorption strength of the adjacent carbon site. This study not only provides an advanced Zn_NP-O-C catalyst for electrochemical H₂O₂ production but also proposes a fast and precise method for the comprehensive assessment of future catalysts.

Electrocatalytic two-electron oxygen reduction over nitrogen doped hollow carbon nanospheres

The two-electron oxygen reduction reaction (2e^- ORR) has become a hopeful alternative for production of hydrogen peroxide (H₂O₂), but its practical feasibility is hindered by the lack of efficient electrocatalysts to achieve high activity and selectivity. Herein, we successfully synthesized outstanding nitrogen doped hollow carbon nanospheres (NHCSs) for electrochemical production of H₂O₂. In 0.1 M KOH, NHCSs exhibit superior and sustained catalytic activity for the 2e^- ORR with an unordinary selectivity of 96.6%. Impressively, such NHCSs manifest an ultrahigh H₂O₂ yield rate of 7.32 mol g_cat.^-1  h^-1 and a high faradaic efficiency of 96.7% at 0.5 V in an H-cell system. Density functional theory calculations were performed to further reveal the catalytic mechanism involved.

Engineering single-atom catalysts toward biomedical applications

Due to inherent structural defects, common nanocatalysts always display limited catalytic activity and selectivity, making it practically difficult for them to replace natural enzymes in a broad scope of biologically important applications. By decreasing the size of the nanocatalysts, their catalytic activity and selectivity will be substantially improved. Guided by this concept, the advances of nanocatalysts now enter an era of atomic-level precise control. Single-atom catalysts (denoted as SACs), characterized by atomically dispersed active sites, strikingly show utmost atomic utilization, precisely located metal centers, unique metal-support interactions and identical coordination environments. Such advantages of SACs drastically boost the specific activity per metal atom, and thus provide great potential for achieving superior catalytic activity and selectivity to functionally mimic or even outperform natural enzymes of interest. Although the size of the catalysts does matter, it is not clear whether the guideline of "the smaller, the better" is still correct for developing catalysts at the single-atom scale. Thus, it is clearly a new, urgent issue to address before further extending SACs into biomedical applications, representing an important branch of nanomedicine. This review begins by providing an overview of recent advances of synthesis strategies of SACs, which serve as a basis for the discussion of emerging achievements in improving the enzyme-like catalytic properties at an atomic level. Then, we carefully compare the structures and functions of catalysts at various scales from nanoparticles, nanoclusters, and few-atom clusters to single atoms. Contrary to conventional wisdom, SACs are not the most catalytically active catalysts in specific reactions, especially those requiring multi-site auxiliary activities. After that, we highlight the unique roles of SACs toward biomedical applications. To appreciate these advances, the challenges and prospects in rapidly growing studies of SACs-related catalytic nanomedicine are also discussed in this review.

Boosting Oxygen Reduction for High-Efficiency H2 O2 Electrosynthesis on Oxygen-Coordinated CoNC Catalysts

Atomically dispersed CoNC is a promising material for H₂ O₂ selective electrosynthesis via a two-electron oxygen reduction reaction. However, the performance of typical CoNC materials with routine CoN₄ active center is insufficient and needs to be improved further. This can be done by fine-tuning its atomic coordination configuration. Here, a single-atom electrocatalyst (Co/NC) is reported that comprises a specifically penta-coordinated CoNC configuration (OCoN₂ C₂ ) with Co center coordinated by two nitrogen atoms, two carbon atoms, and one oxygen atom. Using a combination of theoretical predictions and experiments, it is confirmed that the unique atomic structure slightly increases the charge state of the cobalt center. This optimizes the adsorption energy towards *OOH intermediate, and therefore favors the two-electron ORR relevant for H₂ O₂ electrosynthesis. In neutral solution, the as-synthesized Co/NC exhibits a selectivity of over 90% over a potential ranging from 0.36 to 0.8 V, with a turnover frequency value of 11.48 s^-1 ; thus outperforming the state-of-the-art carbon-based catalysts.

A clicking confinement strategy to fabricate transition metal single-atom sites for bifunctional oxygen electrocatalysis

Rechargeable zinc-air batteries call for high-performance bifunctional oxygen electrocatalysts. Transition metal single-atom catalysts constitute a promising candidate considering their maximum atom efficiency and high intrinsic activity. However, the fabrication of atomically dispersed transition metal sites is highly challenging, creating a need for for new design strategies and synthesis methods. Here, a clicking confinement strategy is proposed to efficiently predisperse transitional metal atoms in a precursor directed by click chemistry and ensure successful construction of abundant single-atom sites. Concretely, cobalt-coordinated porphyrin units are covalently clicked on the substrate for the confinement of the cobalt atoms and affording a Co-N-C electrocatalyst. The Co-N-C electrocatalyst exhibits impressive bifunctional oxygen electrocatalytic performances with an activity indicator ΔE of 0.79 V. This work extends the approach to prepare transition metal single-atom sites for efficient bifunctional oxygen electrocatalysis and inspires the methodology on precise synthesis of catalytic materials.

Perspective for Single Atom Nanozymes Based Sensors: Advanced Materials, Sensing Mechanism, Selectivity Regulation, and Applications

Nanozymes are a kind of nanomaterial mimicking enzyme catalytic activity, which has aroused extensive interest in the fields of biosensors, biomedicine, and climate and ecosystems management. However, due to the complexity of structures and composition of nanozymes, atomic scale active centers have been extensively investigated, which helps with in-depth understanding of the nature of the biocatalysis. Single atom nanozymes (SANs) cannot only significantly enhance the activity of nanozymes but also effectively improve the selectivity of nanozymes owing to the characteristics of simple and adjustable coordination environment and have been becoming the brightest star in the nanozyme spectrum. The SANs based sensors have also been widely investigated due to their definite structural features, which can be helpful to study the catalytic mechanism and provide ways to improve catalytic activity. This perspective presents a comprehensive understanding on the advances and challenges on SANs based sensors. The catalytic mechanisms of SANs and then the sensing application from the perspectives of sensing technology and sensor construction are thoroughly analyzed. Finally, the major challenges, potential future research directions, and prospects for further research on SANs based sensors are also proposed.

Atomically Dispersed Cu Anchored on Nitrogen and Boron Codoped Carbon Nanosheets for Enhancing Catalytic Performance

Development of high-performance heterogeneous catalytic materials is important for the rapid upgrade of chemicals, which remains a challenge. Here, the benzene oxidation reaction was used to demonstrate the effectiveness of the atomic interface strategy to improve catalytic performance. The developed B,N-cocoordinated Cu single atoms anchored on carbon nanosheets (Cu₁/B-N) with the Cu-N₂B₁ atomic interface was prepared by the pyrolysis of a precoordinated Cu precursor. Benefiting from the unique atomic Cu-N₂B₁ interfacial structure, the designed Cu₁/B-N exhibited considerable activity in the oxidation of benzene, which was much higher than Cu₁/N-C, Cu NPs/N-C, and N-C catalysts. A theoretical study showed that the enhanced catalytic performance resulted from the optimized adsorption of intermediates, which originated from the manipulation of the electronic structure of Cu single atoms induced by B atom coordination in the Cu-N₂B₁ atomic interface. This study provides an innovative approach for the rational design of high-performance heterogeneous catalytic materials at the atomic level.

Versatile Polymer Nanocapsules via Redox Competition

Polymer nanocapsules have demonstrated significant value in materials science and biomedical technology, but require complicated and time-consuming synthetic steps. We report here the facile synthesis of monodisperse polymer nanocapsules via a redox-mediated kinetic strategy from two simple molecules: dopamine and benzene-1,4-dithiol (BDT). Specifically, BDT forms core templates and modulates the oxidation kinetics of dopamine into polydopamine (PDA) shells. These uniform nanoparticles can be tuned between ≈70 and 200 nm because the core diameter directly depends on BDT while the shell thickness depends on dopamine. The supramolecular core can then rapidly disassemble in organic solvents to produce PDA nanocapsules. Such nanocapsules exhibit enhanced physicochemical performance (e.g., loading capacity, photothermal transduction, and anti-oxidation) versus their solid counterparts. Particularly, this method enables a straightforward encapsulation of functional nanoparticles providing opportunities for designing complex nanostructures such as yolk-shell nanoparticles.

A single-atom Cu-N2 catalyst eliminates oxygen interference for electrochemical sensing of hydrogen peroxide in a living animal brain

Hydrogen peroxide (H₂O₂) plays essential roles in various physiological and pathological processes. The electrochemical hydrogen peroxide reduction reaction (HPRR) has been recognized as an efficient approach to H₂O₂ sensing; however, the HPRR has always suffered from low tolerance against the oxygen reduction reaction (ORR), resulting in poor selectivity of the HPRR-based sensing platform. In this study, we find that the electrochemical HPRR occurs preferentially compared to the ORR when isolated Cu atoms anchored on carbon nitride (Cu₁/C₃N₄) are used as a single-atom electrocatalyst, which is theoretically attributed to the lower energy barrier of the HPRR than that of the ORR on a Cu₁/C₃N₄ single-atom catalyst (SAC). With the Cu₁/C₃N₄ SAC as the electrocatalyst, we fabricated microsensors that have a good response to H₂O₂, but not to O₂ or other electroactive neurochemicals. When implanted into a living rat brain, the microsensor shows excellent in vivo sensing performance, enabling its application in real-time quantitative investigation of the dynamics of H₂O₂ production induced by mercaptosuccinate and glutathione monoethyl ester in a living animal brain.

We have achieved the selective monitoring of H₂O₂ fluctuation in vivo free from O₂ interference by a single-atom Cu–N₂ electrocatalyst.

Toward Multicomponent Single-Atom Catalysis for Efficient Electrochemical Energy Conversion

Single-atom catalysts (SACs) have recently emerged as the ultimate solution for overcoming the limitations of traditional catalysts by bridging the gap between homogeneous and heterogeneous catalysts. Atomically dispersed identical active sites enable a maximal atom utilization efficiency, high activity, and selectivity toward the wide range of electrochemical reactions, superior structural robustness, and stability over nanoparticles due to strong atomic covalent bonding with supports. Mononuclear active sites of SACs can be further adjusted by engineering with multicomponent elements, such as introducing dual-metal active sites or additional neighbor atoms, and SACs can be regarded as multicomponent SACs if the surroundings of the active sites or the active sites themselves consist of multiple atomic elements. Multicomponent engineering offers an increased combinational diversity in SACs and unprecedented routes to exceed the theoretical catalytic performance limitations imposed by single-component scaling relationships for adsorption and transition state energies of reactions. The precisely designed structures of multicomponent SACs are expected to be responsible for the synergistic optimization of the overall electrocatalytic performance by beneficially modulating the electronic structure, the nature of orbital filling, the binding energy of reaction intermediates, the reaction pathways, and the local structural transformations. This Review demonstrates these synergistic effects of multicomponent SACs by highlighting representative breakthroughs on electrochemical conversion reactions, which might mitigate the global energy crisis of high dependency on fossil fuels. General synthesis methods and characterization techniques for SACs are also introduced. Then, the perspective on challenges and future directions in the research of SACs is briefly summarized. We believe that careful tailoring of multicomponent active sites is one of the most promising approaches to unleash the full potential of SACs and reach the superior catalytic activity, selectivity, and stability at the same time, which makes SACs promising candidates for electrocatalysts in various energy conversion reactions.

Dual effect of the coordination field and sulphuric acid on the properties of a single-atom catalyst in the electrosynthesis of H2O2

Electrocatalytic synthesis of hydrogen peroxide (H₂O₂) via the two-electron oxygen reduction reaction (2e^- ORR) is the ideal solution for on-site H₂O₂ production. Herein, we propose a new strategy for creating new 2e^- ORR catalysts by introducing electron-deficient B atoms and electron-rich N atoms to regulate the coordination field of metal ions on a graphene substrate. Through the first-principles density functional theory (DFT) calculations, NiN₂B₂-h was screened out as it had a low overpotential (0.12 V) for 2e^- ORR. The Bader charge analysis revealed that B atoms increased the charge density of Ni atoms, leading to moderate binding of O₂. Furthermore, the combination of ab initio molecular dynamic (AIMD) calculations and DFT calculations in an H₂SO₄ environment revealed a new reaction mechanism of H₂O₂ synthesis, involving proton-transfer between activated O₂ and HSO₄^-. Moreover, the rate-determining step (0.63 eV) of H₂O₂ desorption in the presence of H₂SO₄ was different from that of OOH* protonation (0.45 eV) under the gas phase. This difference is attributed to the hydrogen-bond network in the acid solution.

Large-scale defect-rich iron/nitrogen co-doped graphene-based materials as the excellent bifunctional electrocatalyst for liquid and flexible all-solid-state zinc-air batteries

Defect-engineering in transition-metal-doped carbon-based catalyst plays an essential role for improving the oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) performance. Herein, we report a ball-milling induced defect assisted with ZnCl₂ strategy for fabricating defect-rich iron/nitrogen co-doped graphene-based materials (Fe-N-G). The substantial mechanical shear forces and the constant corrosion to the carbon matrix by ZnCl₂ lead to the creation of abundant defects in graphene-based materials, which facilitates doping for heteroatoms. The defect-rich Fe-N-G catalyst with abundant Fe-N_x active sites displays excellent ORR performance. For OER, the over potential for Fe-N-G outperforms that of RuO₂ in 1 M KOH at 10 mA cm^-2. The Density Functional Theory calculations unravel that the impressive OER performance is attributable to the introduction of abundant defects. Additionally, the liquid and all-solid-state zinc-air batteries equipped with the prepared material as the air cathode demonstrate high power density, high specific capacity, and long charge-discharge stability. This work offers a practical method for manufacturing high-performance electrocatalysts for environmental and energy-related fields.

Synergistic Catalysis by Single-Atom Catalysts and Redox Mediator to Improve Lithium-Oxygen Batteries Performance

Lithium-oxygen (Li-O₂ ) batteries with ultrahigh theoretical energy density have attracted widespread attention while there are still problems with high overpotential and poor cycle stability. Rational design and application of efficient catalysts to improve the performance of Li-O₂ batteries is of significant importance. In this work, Co single atoms catalysts are successfully combined with redox mediator (lithium bromide [LiBr]) to synergistically catalyze electrochemical reactions in Li-O₂ batteries. Single-atom cobalt anchored in porous N-doped hollow carbon spheres (CoSAs-NHCS) with high specific surface area and high catalytic activity are utilized as cathode material. However, the potential performances of batteries are difficult to adequately achieve with only CoSAs-NHCS, owing to the blocked electrochemical active sites covered by insulating solid-state discharge product Li₂ O₂ . Combined with LiBr as redox mediator, the enhanced OER catalytic effect extends throughout all formed Li₂ O₂ during discharge. Meantime, the certain adsorption effect of CoSAs-NHCS on Br₂ and Br₃ ^- can reduce the shuttle of RM^ox . The synergistic effect of Co single atoms and LiBr can not only promote more Li₂ O₂ decomposition but also reduce the shuttle effect by absorbing the oxidized redox mediator. Li-O₂ batteries with Co single atoms and LiBr achieve ultralow overpotential of 0.69 V and longtime stable cyclability.

Hydrogen Passivation of M-N-C (M = Fe, Co) Catalysts for Storage Stability and ORR Activity Improvements

M-N-C (M = Fe, Co) are highly active nonprecious metal electrocatalysts for the oxygen reduction reaction (ORR) and other applications. Although their operation stability has been extensively studied in proton-exchange-membrane fuel cells, the storage stability that determines the performance maintenance before use has not yet been understood. Here, it is found that long-term exposure of M-N-C catalysts in air would cause surface oxidation and hydroxylation, resulting in significant decrease of ORR activity and fuel-cell performances. Hydrogen passivation is demonstrated to be an effective strategy to protect the atomic M-N₄ active sites and improve the storage stability of the catalysts. In addition, the hydrogen-termination can also reduce the ORR energy barrier and increase the utilization of active sites, leading to the improvements of fuel-cell activity and power density. Notably, these findings help to understand the storage-associated degradation and protection of M-N-C catalysts.

Constructing N, P-dually doped biochar materials from biomass wastes for high-performance bifunctional oxygen electrocatalysts

The large scale lignocellulosic biomass wastes could also be regarded as abundantly-available renewable resources, and how to convert them into value-added products via sustainable approaches is still a big challenge. In this work, we demonstrated a facile pyrolysis method to construct N, P-dually doped biochar materials from the lignocellulosic biomass wastes. The as-synthesized N, P-dually doped biochar samples could act as electrocatalysts for oxygen reduction and evolution reactions (ORR/OER), showing excellent catalytic performance and long-term durability, as well as robust tolerance to CO and methanol. The unique hierarchical porous structure, favorable electronic structure modified by the N and P doping, as well as a variety of defect sites induced by the N and P doping into the carbon framework were identified as the main contributions to the prominent catalytic activity of the as-synthesized N, P-dually doped biochar materials. We expect this work would spur more efforts into developing advanced materials from the large scale lignocellulosic biomass wastes.

Atomically Structural Regulations of Carbon-Based Single-Atom Catalysts for Electrochemical CO2 Reduction

The electrochemical carbon dioxide reduction reaction (CO₂ RR) converting CO₂ into value-added chemicals and fuels to realize carbon recycling is a solution to the problem of renewable energy shortage and environmental pollution. Among all the catalysts, the carbon-based single-atom catalysts (SACs) with isolated metal atoms immobilized on conductive carbon substrates have shown significant potential toward CO₂ RR, which intrigues researchers to explore high-performance SACs for fuel and chemical production by CO₂ RR. Especially, regulating the coordination structures of the metal centers and the microenvironments of the substrates in carbon-based SACs has emerged as an effective strategy for the tailoring of their CO₂ RR catalytic performance. In this review, the current in situ/operando study techniques and the fundamental parameters for CO₂ RR performance are first briefly presented. Furthermore, the recent advances in synthetic strategies which regulate the atomic structures of the carbon-based SACs, including heteroatom coordination, coordination numbers, diatomic metal centers, and the microenvironments of substrates are summarized. In particular, the structure-performance relationship of the SACs toward CO₂ RR is highlighted. Finally, the inevitable challenges for SACs are outlined and further research directions toward CO₂ RR are presented from the perspectives.

Flash Bottom-Up Arc Synthesis of Nanocarbons as a Universal Route for Fabricating Single-Atom Electrocatalysts

Despite considerable development in the field of single-atom catalysts (SACs) on carbon-based materials, the reported strategies for synthesizing SACs generally rely on top-down approaches, which hinder achieving both simple and universal synthesis routes that are simultaneously applicable to various metals and nanocarbons. Here, a universal strategy for fabricating nanocarbon based-SACs using a flash bottom-up arc discharge method to mitigate these issues is reported. The ionization of elements and their recombination process during arc discharge allows the simultaneous incorporation of single metal atoms (Mn, Fe, Co, Ni, and Pt) into the crystalline carbon lattice during the formation of carbon nanohorns (CNHs) and N-doped arc graphene. The coordination environment around the Co atoms of Co₁ /CNH can be modulated by a mild post-treatment with NH₃ . As a result, Co₁ /CNH exhibits good oxygen reduction reaction activity, showing a 1.92 times higher kinetic current density value than the commercial Pt/C catalyst in alkaline media. In a single cell experiment, Co₁ /CNH exhibits the highest maximum power density of 472 mW cm^-2 compared to previously reported nonprecious metal-based SACs.

Intrinsic ORR Activity Enhancement of Pt Atomic Sites by Engineering the d-Band Center via Local Coordination Tuning

A considerable amount of platinum (Pt) is required to ensure an adequate rate for the oxygen reduction reaction (ORR) in fuel cells and metal-air batteries. Thus, the implementation of atomic Pt catalysts holds promise for minimizing the Pt content. In this contribution, atomic Pt sites with nitrogen (N) and phosphorus (P) co-coordination on a carbon matrix (PtNPC) are conceptually predicted and experimentally developed to alter the d-band center of Pt, thereby promoting the intrinsic ORR activity. PtNPC with a record-low Pt content (≈0.026 wt %) consequently shows a benchmark-comparable activity for ORR with an onset of 1.0 V_RHE and half-wave potential of 0.85 V_RHE . It also features a high stability in 15 000-cycle tests and a superior turnover frequency of 6.80 s^-1 at 0.9 V_RHE . Damjanovic kinetics analysis reveals a tuned ORR kinetics of PtNPC from a mixed 2/4-electron to a predominately 4-electron route. It is discovered that coordinated P species significantly shifts d-band center of Pt atoms, accounting for the exceptional performance of PtNPC.

Porous Carbon Architecture Assembled by Cross-Linked Carbon Leaves with Implanted Atomic Cobalt for High-Performance Li-S Batteries

The practical application of lithium-sulfur batteries is severely hampered by the poor conductivity, polysulfide shuttle effect and sluggish reaction kinetics of sulfur cathodes. Herein, a hierarchically porous three-dimension (3D) carbon architecture assembled by cross-linked carbon leaves with implanted atomic Co-N₄ has been delicately developed as an advanced sulfur host through a SiO₂-mediated zeolitic imidazolate framework-L (ZIF-L) strategy. The unique 3D architectures not only provide a highly conductive network for fast electron transfer and buffer the volume change upon lithiation-delithiation process but also endow rich interface with full exposure of Co-N₄ active sites to boost the lithium polysulfides adsorption and conversion. Owing to the accelerated kinetics and suppressed shuttle effect, the as-prepared sulfur cathode exhibits a superior electrochemical performance with a high reversible specific capacity of 695 mAh g^-1 at 5 C and a low capacity fading rate of 0.053% per cycle over 500 cycles at 1 C. This work may provide a promising solution for the design of an advanced sulfur-based cathode toward high-performance Li-S batteries.

Encapsulation of Ultrafine Metal-Organic Framework Nanoparticles within Multichamber Carbon Spheres by a Two-Step Double-Solvent Strategy for High-Performance Catalysts

Carbon-encapsulated metal-organic framework (MOF) composite is one kind of emerging new catalyst with high efficiency and has gained much attention. However, for this kind of composite catalyst, the key to improving its catalytic activity and durability is to realize the effective dispersion of MOF nanoparticles (NPs) and enhance the interaction between MOF NPs and the carbon matrix, which remain a significant challenge. Herein, ultrafine MOF NPs within multichamber carbon spheres (MOF@MCCS), for the first time, have been rationally synthesized by a two-step double-solvent strategy for high-performance catalysts. The precise loading of guest MOFs can be achieved by adjusting the multichamber structure and calcination extent of the multichamber polymer (MCP), and the particle size of MOFs can be as low as 13.2 nm. Due to the formation of abundant carbon defects in the pyrolysis process of MCPs, the special structure and synergistic effect make the material exhibit higher catalytic activity and durability. More importantly, this method is universal and can be extended to different MOF systems. The two-step double-solvent strategy not only prepares a unique structure of MOF@MCCS-type host-guest-encapsulated catalysts but also provides a new idea for the design of high-efficiency catalysts with better performance and higher durability.

Single-atom catalysts boost signal amplification for biosensing

Development of highly sensitive biosensors has received ever-increasing attention over the years. Due to the unique physicochemical properties, the functional nanomaterial-enabled signal amplification strategy has made some great breakthroughs in biosensing. However, the sensitivity and selectivity still need further improvement. Single-atom catalysts (SACs) containing atomically dispersed metal active sites demonstrate distinctive advantages in catalytic activity and selectivity for various catalytic reactions. As a consequence, the SAC-enabled signal amplification strategy holds great promise in biosensors, demonstrating satisfactory sensitivity and selectivity with the assistance of tunable metal-support interactions, coordination environments and geometric/electronic structures of active sites. In this tutorial review, we briefly discuss the structural advantages of SACs. Then, the catalytic mechanism at the atomic scale and signal amplification effects of SACs in the colorimetric, electrochemical, chemiluminescence, electrochemiluminescence, and photoelectrochemical biosensing applications are highlighted in detail. Finally, opportunities and challenges to be faced in the future development of the SAC-enabled signal amplification strategy for biosensing are discussed and outlooked.