A New Class of Non-C2-Symmetric Ligands for Oxidative and Redox-Neutral Palladium-Catalyzed Asymmetric Allylic Alkylations of 1,3-Diketones

Access to Chiral Hydropyrimidines through Palladium-Catalyzed Asymmetric Allylic C-H Amination

A palladium-catalyzed asymmetric intramolecular allylic C-H amination controlled by a chiral phosphoramidite ligand was established for the preparation of various substituted chiral hydropyrimidinones, the precursors of hydropyrimidines, in high yields with high enantioselectivities. In particular, dienyl sodium N-sulfonyl amides bearing an arylethene-1-sulfonyl group underwent a sequential allylic C-H amination and intramolecular Diels-Alder (IMDA) reaction to produce chiral fused tricyclic tetrahydropyrimidinone frameworks in high yields and with high levels of stereoselectivity. Significantly, this method was used as the key step in an asymmetric synthesis of letermovir.

Palladium-Catalyzed Aerobic Oxygenation of Allylarenes

An efficient and practical protocol for the synthesis of (E)-allylethers from readily available olefins with alcohols or phenols was developed. This aerobic oxidative allylic C-H oxygenation protocol features mild conditions, broad substrate scope, and high atom and step economy, making it a valuable and convenient synthetic method. Notably, molecular oxygen is the sole oxidant in this novel transformation.

Ligand-Promoted Palladium-Catalyzed Aerobic Oxidation Reactions

Palladium-catalyzed aerobic oxidation reactions have been the focus of industrial application and extensive research efforts for nearly 60 years. A significant transition occurred in this field approximately 20 years ago, with the introduction of catalysts supported by ancillary ligands. The ligands play crucial roles in the reactions, including promotion of direct oxidation of palladium(0) by O₂, bypassing the typical requirement for Cu salts or related redox cocatalysts to facilitate oxidation of the reduced Pd catalyst; facilitation of key bond-breaking and bond-forming steps during substrate oxidation; and modulation of chemo-, regio-, or stereoselectivity of a reaction. The use of ligands has contributed to significant expansion of the scope of accessible aerobic oxidation reactions. Increased understanding of the role of ancillary ligands should promote the development of new synthetic transformations, enable improved control over the reaction selectivity, and improve catalyst activity and stability. This review surveys the different ligands that have been used to support palladium-catalyzed aerobic oxidation reactions and, where possible, describes mechanistic insights into the role played by the ancillary ligand.

Pd-catalyzed asymmetric allylic alkylations via C-H activation of N-allyl imines with glycinates

Herein is reported the first example of palladium-catalyzed asymmetric allylic alkylation (AAA) reactions involving 2-aza-π-allyl palladium intermediates. The 2-aza-π-allyl complex was generated via a novel mode of activation of N-allyl imines. Pd-catalyzed C(sp3)-H activation of N-allyl imines and subsequent nucleophilic attack by glycinates delivered vicinal diamino derivatives as the sole regioisomers with high levels of diastereo- and enantio-control in the presence of the chiral, bidentate (S,S)-Cy-DIOP ligand. This procedure is highly atom economical and could also be performed by a simple one-pot operation starting from aldehydes, allyl amines and glycinates under mild conditions. The products of this transformation could be converted into various useful derivatives, where the allyl substitution serves as a unique tool for differentiating the two amino moieties in the products.

Catalytic allylic oxidation of internal alkenes to a multifunctional chiral building block

The stereoselective oxidation of hydrocarbons is one of the most notable advances in synthetic chemistry over the past fifty years. Inspired by nature, enantioselective dihydroxylations, epoxidations and other oxidations of unsaturated hydrocarbons have been developed. More recently, the catalytic enantioselective allylic carbon-hydrogen oxidation of alkenes has streamlined the production of pharmaceuticals, natural products, fine chemicals and other functional materials. Allylic functionalization provides a direct path to chiral building blocks with a newly formed stereocentre from petrochemical feedstocks while preserving the olefin functionality as a handle for further chemical elaboration. Various metal-based catalysts have been discovered for the enantioselective allylic carbon-hydrogen oxidation of simple alkenes with cyclic or terminal double bonds. However, a general and selective allylic oxidation using the more common internal alkenes remains elusive. Here we report the enantioselective, regioselective and E/Z-selective allylic oxidation of unactivated internal alkenes via a catalytic hetero-ene reaction with a chalcogen-based oxidant. Our method enables non-symmetric internal alkenes to be selectively converted into allylic functionalized products with high stereoselectivity and regioselectivity. Stereospecific transformations of the resulting multifunctional chiral building blocks highlight the potential for rapidly converting internal alkenes into a broad range of enantioenriched structures that can be used in the synthesis of complex target molecules.

Enantioselective Construction of Acyclic Quaternary Carbon Stereocenters: Palladium-Catalyzed Decarboxylative Allylic Alkylation of Fully Substituted Amide Enolates

We report a divergent and modular protocol for the preparation of acyclic molecular frameworks containing newly created quaternary carbon stereocenters. Central to this approach is a sequence composed of a (1) regioselective and -retentive preparation of allyloxycarbonyl-trapped fully substituted stereodefined amide enolates and of a (2) enantioselective palladium-catalyzed decarboxylative allylic alkylation reaction using a novel bisphosphine ligand.

Iridium-Catalyzed Enantioselective Allylic Substitution of Aliphatic Esters with Silyl Ketene Acetals as the Ester Enolates

Enantioselective allylic substitution with enolates derived from aliphatic esters under mild conditions remains challenging. Herein we report iridium-catalyzed enantioselective allylation reactions of silyl ketene acetals, the silicon enolates of esters, to form products containing a quaternary carbon atom at the nucleophile moiety and a tertiary carbon atom at the electrophile moiety. Under relatively neutral conditions, the allylated aliphatic esters were obtained with excellent regioselectivity and enantioselectivity. These products were readily converted into primary alcohols, carboxylic acids, amides, isocyanates, and carbamates, as well as tetrahydrofuran and γ-butyrolactone derivatives, without erosion of enantiomeric purity.

Arylative Intramolecular Allylation of Ketones with 1,3-Enynes Enabled by Catalytic Alkenyl-to-Allyl 1,4-Rhodium(I) Migration

Alkenyl‐to‐allyl 1,4‐rhodium(I) migration enables the generation of nucleophilic allylrhodium(I) species by remote C−H activation. This new mode of reactivity was employed in the diastereoselective reaction of arylboron reagents with substrates containing a 1,3‐enyne tethered to a ketone, to give products containing three contiguous stereocenters. The products can be obtained in high enantioselectivities using a chiral sulfur‐alkene ligand.

Enantioselective Terminal Addition to Allenes by Dual Chiral Primary Amine/Palladium Catalysis

We herein describe a synergistic chiral primary amine/achiral palladium catalyzed enantioselective terminal addition to allenes with α-branched β-ketocarbonyls and aldehydes. The reactions afford allylic adducts bearing acyclic all-carbon quaternary centers with high regio- and enantioselectivity. A wide range of allenes including those aliphatic or 1,1'-disubstituted could be employed, thus expanding the scope of typical asymmetric allylic alkylation reactions.

Enantioselective Allylic C-H Oxidation of Terminal Olefins to Isochromans by Palladium(II)/Chiral Sulfoxide Catalysis

The enantioselective synthesis of isochroman motifs has been accomplished by palladium(II)-catalyzed allylic C-H oxidation from terminal olefin precursors. Critical to the success of this goal was the development and utilization of a novel chiral aryl sulfoxide-oxazoline (ArSOX) ligand. The allylic C-H oxidation reaction proceeds with the broadest scope and highest levels of asymmetric induction reported to date (avg. 92 % ee, 13 examples with greater than 90 % ee).

A Ruthenium/Phosphoramidite-Catalyzed Asymmetric Interrupted Metallo-ene Reaction

Allylic chlorides prepared from commercially available trans-1,4-dichloro-2-butene were converted to trans-disubstituted 5- and 6-membered ring systems with perfect diastereoselectivity and high enantioselectivity under chiral ruthenium catalysis. These products contain stereodefined secondary and tertiary alcohols that originate from the trapping of an alkylruthenium intermediate with adventitious water. Key to the success of this transformation was the development of a new BINOL-based phosphoramidite ligand containing bulky substitution at its 3- and 3'-positions. As a demonstration of product utility, diastereoselective Friedel-Crafts reactions were performed on the chiral benzylic alcohols in high yield and stereoselectivity.

Mini-ISES identifies promising carbafructopyranose-based salens for asymmetric catalysis: Tuning ligand shape via the anomeric effect

This study introduces new methods of screening for and tuning chiral space and in so doing identifies a promising set of chiral ligands for asymmetric synthesis. The carbafructopyranosyl-1,2-diamine(s) and salens constructed therefrom are particularly compelling. It is shown that by removing the native anomeric effect in this ligand family, one can tune chiral ligand shape and improve chiral bias. This concept is demonstrated by a combination of (i) x-ray crystallographic structure determination, (ii) assessment of catalytic performance, and (iii) consideration of the anomeric effect and its underlying dipolar basis. The title ligands were identified by a new mini version of the in situ enzymatic screening (ISES) procedure through which catalyst-ligand combinations are screened in parallel, and information on relative rate and enantioselectivity is obtained in real time, without the need to quench reactions or draw aliquots. Mini-ISES brings the technique into the nanomole regime (200 to 350 nmol catalyst/20 μml organic volume) commensurate with emerging trends in reaction development/process chemistry. The best-performing β-d-carbafructopyranosyl-1,2-diamine-derived salen ligand discovered here outperforms the best known organometallic and enzymatic catalysts for the hydrolytic kinetic resolution of 3-phenylpropylene oxide, one of several substrates examined for which the ligand is "matched." This ligand scaffold defines a new swath of chiral space, and anomeric effect tunability defines a new concept in shaping that chiral space. Both this ligand set and the anomeric shape-tuning concept are expected to find broad application, given the value of chiral 1,2-diamines and salens constructed from these in asymmetric catalysis.