Stabilizing Effects of Various Polyelectrolyte Multilayer Films on the Structure of Adsorbed/Embedded Fibrinogen Molecules: An ATR−FTIR Study

Casein aggregates built step-by-step on charged polyelectrolyte film surfaces are calcium phosphate-cemented

The possible mechanism of casein aggregation and micelle buildup was studied in a new approach by letting α-casein adsorb from low concentration (0.1 mg·ml(-1)) solutions onto the charged surfaces of polyelectrolyte films. It was found that α-casein could adsorb onto both positively and negatively charged surfaces. However, only when its negative phosphoseryl clusters remained free, i.e. when it adsorbed onto a negative surface, could calcium phosphate (CaP) nanoclusters bind to the casein molecules. Once the CaP clusters were in place, step-by-step building of multilayered casein architectures became possible. The presence of CaP was essential; neither Ca(2+) nor phosphate could alone facilitate casein aggregation. Thus, it seems that CaP is the organizing motive in the casein micelle formation. Atomic force microscopy revealed that even a single adsorbed casein layer was composed of very small (in the range of tens of nanometers) spherical forms. The stiffness of the adsorbed casein layer largely increased in the presence of CaP. On this basis, we can imagine that casein micelles emerge according to the following scheme. The amphipathic casein monomers aggregate into oligomers via hydrophobic interactions even in the absence of CaP. Full scale, CaP-carrying micelles could materialize by interlocking these casein oligomers with CaP nanoclusters. Such a mechanism would not contradict former experimental results and could offer a synthesis between the submicelle and the block copolymer models of casein micelles.

Dichroic ATR-FTIR spectroscopy on oriented α-helical poly(l-lysine) multilayered with polyanions

The preparation and spectroscopic and microscopic characterization of oriented polyelectrolyte multilayers (PEM) interesting for defined nanostructured functional materials and surfaces are reviewed. Oriented PEM were generated by consecutively adsorbing α-helical poly(l-lysine) (PLL) and oppositely charged polyanions like poly(vinylsulfate) (PVS) or poly(styrene sulfonate) (PSS) at silicon substrates texturized by parallel nanoscopic surface grooves, respectively. Dichroic Attenuated Total Reflexion Fourier Transform Infrared (ATR-FTIR) spectroscopy was used to study the conformation and macromolecular order of stiff polyelectrolytes within PEM. High order parameters up to S=0.82 (S=1 for high, S=0 for low order) were obtained from the dichroic ratios of the Amide I and Amide II bands suggesting a significant alignment of charged α-helical polypeptides in PEM. For PEM consisting of PLL/polyanion the S values significantly increased with increasing molecular weight of PLL and with decreasing molecular weight of the polyanion. These spectroscopic findings were supported by SFM images on PEM-PLL/PVS with high molecular PLL and PEM-PLL/PSS with low molecular PSS, which both showed anisotropically oriented worm-like structures, while PEM-PLL/PVS with low molecular PLL and PEM-PLL/PSS with high molecular PSS showed no orientation features.

Effect of surface morphology and charge on the amount and conformation of fibrinogen adsorbed onto alginate/chitosan microcapsules

We report the influence of surface morphology and charge of alginate/chitosan (ACA) microcapsules on both the amount of adsorbed protein and its secondary structural changes during adsorption. Variations in surface morphology and charge were controlled by varying alginate molecular weight and chitosan concentration. Plasma fibrinogen (Fgn) was chosen to model this adsorption to foreign surfaces. The surface of ACA microcapsules exhibited a granular structure after incubating calcium alginate beads with chitosan solution to form membranes. The surface roughness of ACA microcapsule membranes decreased with decreasing alginate molecular weight and chitosan concentration. Zeta potential measurements showed that there was a net negative charge on the surface of ACA microcapsules which decreased with decreasing alginate molecular weight and chitosan concentration. The increase in both surface roughness and zeta potential resulted in an increase in the amount of Fgn adsorbed. Moreover, the higher the zeta potential was, the stronger the protein-surface interaction between fibrinogen and ACA microcapsules was. More protein molecules adsorbed spread and had a greater conformational change on rougher surfaces for more surfaces being available for protein to attach.

Polysaccharide-blend multilayers containing hyaluronan and heparin as a delivery system for rhBMP-2

It is shown that blend multilayers of hyaluronan (HA) and heparin (HEP) as polyanions and poly(L-lysine) (PLL) as a polycation can be used to prepare films with different thicknesses and chemical compositions. The amounts of recombinant human BMP-2 (rhBMP-2) loaded and the fraction initially released from the films depend on the film's chemical composition. The amounts of rhBMP-2 loaded in the films are much higher for HA mass fractions of more than 0.4. The bioactivity of the rhBMP-2-loaded films is investigated on C2C12 myoblasts, which differentiates into osteoblasts in contact with the films. The alkaline phosphatase expression for cells grown on nanoblend films of various compositions falls over a unique curve. This suggests that the cells "sensing" the rhBMP-2 are not influenced by the film's chemistry. The rhBMP-2 can sustain at least three successive culture sequences while remaining bioactive, thus confirming the important and protective effect of rhBMP-2. Altogether, these results indicate that crosslinked PLL/HA films have superior properties for the incorporation of rhBMP-2 and on its long-lasting bioactivity.

Internal composition versus the mechanical properties of polyelectrolyte multilayer films: the influence of chemical cross-linking

Different types of polyelectrolyte multilayer films composed of poly(L-lysine)/hyaluronan (PLL/HA), chitosan/hyaluronan (CHI/HA) and poly(allylamine hydrochloride)/poly(L-glutamic acid) (PAH/PGA) have been investigated for their internal composition, including water content, ion pairing, and ability to be covalently cross-linked, as well as for their mechanical properties. Film buildup under physiological conditions was monitored by the quartz crystal microbalance with dissipation monitoring (QCM-D) and attenuated total reflectance Fourier transform infrared spectroscopy (ATR-FTIR), which allows unambiguous quantification of the different groups present in the polyelectrolytes. (PAH/PGA) films emerged as the most dense films with the lowest hydration (29%) and the highest COO(-) molar density. In addition, PAH is greatly in excess in these films (3 PAH monomers per PGA monomer). The formation of amide bonds during film cross-linking using the water-soluble carbodiimide EDC was also investigated. All of the films could be cross-linked in a tunable manner, but PAH/PGA exhibited the highest absolute number of amide bonds created, approximately 7 times more than for (PLL/HA) and (CHI/HA) films. The Young's modulus E of the films measured by AFM nanoindentation was shown to vary over 1 to 2 orders of magnitude for the different systems. Interestingly, a linear relationship between E and the density of the covalent cross-links created was observed for (PLL/HA) and (CHI/HA) films whereas (PGA/PAH) films exhibited biphasic behavior. The mean distance between covalent cross-links was estimated to be approximately 11 nm for (PLL/HA) and (CHI/HA) films and only approximately 6 nm for (PAH/PGA) films for the maximum EDC concentration tested (100 mg/mL).

Surface-supported multilayers decorated with bio-active material aimed at light-triggered drug delivery

In this work, we report on the functionalization of layer-by-layer films with gold nanoparticles, microcapsules, and DNA molecules by spontaneous incorporation into the film. Exponentially growing films from biopolymers, namely, hyaluronic acid (HA) and poly-L-lysine (PLL), and linearly growing films from the synthetic polymers, namely, poly(styrene sulfonate) (PSS) and poly(allylamine hydrochloride) (PAH), were examined for the embedding. The studied (PLL/HA)(24)/PLL and (PAH/PSS)(24)/PAH films are later named HA/PLL and PSS/PAH films, respectively. The HA/PLL film has been found to be more efficient for both particle and DNA embedding than PSS/PAH because of spontaneous PLL transport from the interior of the whole HA/PLL film to the surface in order to make additional contact with embedded particles or DNA. DNA and nanoparticles can be immobilized in HA/PLL films, reaching loading capacities of 1.5 and 100 microg/cm(2), respectively. The capacities of PSS/PAH films are 5 and 12 times lower than that for films made from biopolymers. Polyelectrolyte microcapsules adsorb irreversibly on the HA/PLL film surface as single particles whereas very poor interaction was observed for PSS/PAH. This intrinsic property of the HA/PLL film is due to the high mobility of PLL within the film whereas the structure of the PSS/PAH film is "frozen in". Gold nanoparticles and DNA form micrometer-sized aggregates or patches on the HA/PLL film surface. The diffusion of nanoparticles and DNA into the HA/PLL film is restricted at room temperature, but DNA diffusion is triggered by heating to 70 degrees C, leading to homogeneous filling of the film with DNA. The film has not only a high loading capacity but also can be activated by "biofriendly" near-infrared (IR) laser light, thanks to the gold nanoparticle aggregates on the film surface. Composite HA/PLL films with embedded gold nanoparticles and DNA can be activated by light, resulting in DNA release. We assume that the mechanism of the release is dependent on the disturbance in bonding between "doping" PLL and DNA, which is induced by local thermal decomposition of the HA/PLL network in the film when the film is exposed to IR light. Remote IR-light activation of dextran-filled microcapsules modified by gold nanoparticles and integrated into the HA/PLL film is also demonstrated, revealing an alternative release pathway using immobilized light-sensitive carriers (microcapsules).

Assembly of purple membranes on polyelectrolyte films

The membrane protein bacteriorhodopsin in its native membrane bound form (purple membrane) was adsorbed and incorporated into polyelectrolyte multilayered films, and adsorption was in situ monitored by optical waveguide light-mode spectroscopy. The formation of a single layer or a double layer of purple membranes was observed when adsorbed on negatively or positively charged surfaces, respectively. The purple membrane patches adsorbed on the polyelectrolyte multilayers were also evidenced by atomic force microscopy images. The driving forces of the adsorption process were evaluated by varying the ionic strength of the solution as well as the purple membrane concentration. At high purple membrane concentration, interpenetrating polyelectrolyte loops might provide new binding sites for the adsorption of a second layer of purple membranes, whereas at lower concentrations only a single layer is formed. Negative surfaces do not promote a second protein layer adsorption. Driving forces other than just electrostatic ones, such as hydrophobic forces, should play a role in the polyelectrolyte/purple membrane layering. The subtle interplay of all these factors determines the formation of the polyelectrolyte/purple membrane matrix with a presumably high degree of orientation for the incorporated purple membranes, with their cytoplasmic, or extracellular side toward the bulk on negatively or positively charged polyelectrolyte, respectively. The structural stability of bacteriorhodopsin during adsorption onto the surface and incorporation into the polyelectrolyte multilayers was investigated by Fourier transform infrared spectroscopy in attenuated total reflection mode. Adsorption and incorporation of purple membranes within polyelectrolyte multilayers does not disturb the conformational majority of membrane-embedded alpha-helix structures of the protein, but may slightly alter the structure of the extramembraneous segments or their interaction with the environment. This high stability is different from the lower stability of the predominantly beta-sheet structures of numerous globular proteins when adsorbed onto surfaces.

Native-like structure of proteins at a planar poly(acrylic acid) brush

Applying ATR-FTIR (attenuated total reflection Fourier transform infrared) and TIRF (total internal reflection fluorescence) spectroscopy, we have studied the secondary structure and aggregation properties of different proteins which are adsorbed at a poly(acrylic acid) (PAA) brush that covers a macroscopically large, planar surface. The PAA brush has been prepared on the surface of an ATR silicon crystal or a quartz plate. The preparation includes the deposition of a thin poly(styrene) film by spin-coating and the transfer of the diblock copolymer poly(styrene)-poly(acrylic acid) onto the hydrophobic film using the Langmuir-Schafer technique. It has been found that the proteins hen egg white lysozyme, bovine serum albumin, bovine alpha-lactalbumin, and bovine insulin adsorb spontaneously at a PAA brush at neutral pD values, albeit to different degrees. The secondary structure of the proteins was estimated from a decomposition of the amide I'-band in the observed ATR-FTIR spectra. Generally, the fractions of secondary structure elements recovered in this way were almost identical to those found when the proteins are native in solution. In addition, the tendency of insulin to form amyloid fibrils has also been tested when the protein is adsorbed at a planar PAA brush. Insulin is known to form amyloid fibrils in solution at low pH values and elevated temperatures. The experiments performed in this study suggest that a PAA brush does not promote fibril formation of insulin. Rather, insulin that is adsorbed at a PAA brush seems to be excluded from fibril formation pathways even at pD = 2 and 60 degrees C, where fibril formation of insulin is triggered in solution. Overall, the results of this study demonstrate that a planar PAA brush may serve as a mild environment for immobilized proteins.

Factors Ruling Protein Adsorption

In this short review an introduction to the phenomenon of protein adsorption will be given. Protein adsorption often plays the central role in a wide variety of processes occurring in medicine, biochemistry, biotechnology and daily life. The main types of interactions ruling protein adsorption are summarized in this review and the principles of a few powerful experimental techniques to characterize protein adsorbates are outlined. Taking the silica/water interface as an example, the driving forces for protein adsorption are discussed on the basis of recent experimental results. Finally, the interactions of proteins with polyelectrolyte brushes are described. These brushes combine favourable properties of other interfaces and permit a controlled immobilization of protein molecules.

PM-IRRAS Investigation of the Interaction of Serum Albumin and Fibrinogen with a Biomedical-Grade Stainless Steel 316LVM Surface

Polarization modulation infrared reflection absorption spectroscopy (PM-IRRAS) was applied to investigate the interaction of bovine serum albumin (BSA) and fibrinogen with a biomedical-grade 316LVM stainless steel surface, in terms of the adsorption thermodynamics and adsorption-induced secondary structure changes of the proteins. Highly negative apparent Gibbs energy of adsorption values revealed a spontaneous adsorption of both proteins onto the surface, accompanied by significant changes in their secondary structure. It was determined that, at saturated surface coverages, lateral interactions between the adsorbed BSA molecules induced rather extensive secondary structure changes. Fibrinogen's two coiled coils appeared to undergo negligible secondary structure changes upon adsorption of the protein, while large structural rearrangements of the protein's globular domains occurred upon adsorption. The secondary structure of adsorbed fibrinogen was not influenced by lateral interactions between the adsorbed fibrinogen molecules. PM-IRRAS was deemed to be viable for investigating protein adsorption and for obtaining information on adsorption-induced changes in their secondary structures.

Phospholipid bilayers as biomembrane-like barriers in layer-by-layer polyelectrolyte films

Dipalmitoylphosphatidylcholine (DPPC) bilayer was created on the surface of an exponentially growing poly(glutamic acid)/poly(lysine) (PGA/PLL) layer-by-layer polyelectrolyte film. The lipid bilayer decreased the surface roughness of the polyelectrolyte film. The layer-by-layer construction of the polyelectrolyte film could be continued on the top of the DPPC layer. The lipid bilayer, however, formed a barrier in the interior of the polyelectrolyte film, which blocked the diffusion (a prerequisite for exponential growth) of the polyelectrolytes. Thus, a new growth regime started in the upper part of the polyelectrolyte film, which was added to embed the DPPC bilayer. The structure and the dynamics of the DPPC bilayer on the polyelectrolyte film surface remained similar to that of its hydrated multibilayers, except that the phase transition became wider. In the case of embedded DPPC bilayers, in addition, the phase-transition temperature also decreased. This is the result of interactions with the nonconcerted movements of the barrier-separated lower and higher parts of the polyelectrolyte film. Gramicidin A (GRA) as a model of lipid-soluble peptides and proteins was successfully incorporated into such DPPC films. The DPPC films, either with or without GRA, were remarkably stable; as many heating-cooling cycles to measure phase transition could be carried out without visible alterations as wanted.

Polyelectrolyte-mediated adsorption of amelogenin monomers and nanospheres forming mono- or multilayers

We have applied optical waveguide lightmode spectroscopy combined with streaming potential measurements and Fourier-transformed infrared spectroscopy to investigate adsorption of amelogenin nanospheres onto polyelectrolytes. The long-term objective was to better understand the chemical nature of these assemblies and to gain further insight into the molecular mechanisms involved during self-assembly. It was found that monolayers of monomers and negatively charged nanospheres of a recombinant amelogenin (rM179) irreversibly adsorbed onto a positively charged polyelectrolyte multilayer films. On the basis of measurements performed at different temperatures, it was demonstrated that intermolecular interactions for the formation of nanospheres were not affected by their adsorption onto polyelectrolytes. Consecutive adsorption of nanospheres resulting in the formation of multilayer structures was possible by using cationic poly(l-lysine) as mediators. N-Acetyl-d-glucosamine (GlcNac) did not disturb the nanosphere-assembled protein's structure, and it only affected the adsorption of monomeric amelogenin. Infrared spectroscopy of adsorbed amelogenin revealed conformational differences between the monomeric and assembled forms of rM179. While there was a considerable amount of alpha-helices in the monomers, beta-turn and beta-sheet structures dominated the assembled proteins. Our work constitutes the first report on a structurally controlled in vitro buildup of an rM179 nanosphere monolayer-based matrix. Our data support the notion that amelogenin self-assembly is mostly driven by hydrophobic interactions and that amelogenin/PEM interactions are dominated by electrostatic forces. We suggest that similar forces can govern amelogenin interactions with non-amelogenins or the mineral phase during enamel biomineralization.

A Novel ATR-FTIR Approach for Characterisation and Identification of Ex Situ Immobilised Species

We demonstrate a novel method to analyse ex situ prepared protein chips by attenuated total reflection Fourier IR spectroscopy (ATR-FTIR), which circumvents tedious functionalisation steps of internal reflection elements (IREs), and simultaneously allows for complementary measurements by other analytical techniques. This concept is proven by utilising immobilised metal affinity capture (IMAC) chips containing about 10 mum thick films of copolymers coated with nitrilotriacetic acid (NTA) groups, which originally was manufactured for surface enhanced laser desorption ionisation (SELDI) spectrometry. Three immobilisation steps were analysed by ATR-FTIR spectroscopy: 1) NTA complexation with nickel(II) ions 2) binding of two histidine (His)-tagged synthetic peptides of 25 (25-His6) and 48 (48-His6) amino acids to the NTA-groups and 3) attachment of a ligand, mesyl amide, to the surface-bound 48-His6. Despite interference from H(2)O, both amide I and II were well resolved. Utilising peptide adsorption in the thick copolymer matrix yields a high saturation peptide concentration of approximately 100 mg mL(-1) and a dissociation constant of 116+/-11 muM, as determined by a detailed analysis of the Langmuir adsorption isotherm. The mesyl amide ligand was directly seen in the raw ATR-FTIR spectrum with specific peaks in the fingerprint region at 1172 and 1350 cm(-1). Several aspects of the fine structure of the amide I band of the peptide were analysed: influences from secondary structure, amino side chains and competing contamination product. We believe that this approach has great potential as a stand-alone or complementary analytical tool for determination of the chemical composition of functionalised surfaces. We emphasise further that with this approach no chemical treatment of IREs is needed; the chips can be regenerated and reused, and applied in other experimental set-ups.

Bioactive coatings based on polyelectrolyte multilayer architectures functionalized by embedded proteins, peptides or drugs

In recent years, considerable effort has been devoted to the design and controlled fabrication of structured materials with functional properties. The layer by layer buildup of polyelectrolyte multilayer films (PEM films) from oppositely charged polyelectrolytes offers new opportunities for the preparation of functionalized biomaterial coatings. This technique allows the preparation of supramolecular nano-architectures exhibiting specific properties in terms of control of cell activation and may also play a role in the development of local drug delivery systems. Peptides, proteins, chemically bound to polyelectrolytes, adsorbed or embedded in PEM films, have been shown to retain their biological activities.

Aggregation of lysozyme and of poly(ethylene glycol)-modified lysozyme after adsorption to silica

Surface-induced aggregation is a common instability during protein storage, delivery and purification. This aggregation can lead to the formation of fibrils rich in intermolecular beta-sheet structure. Techniques to probe surface-clustering are limited. Here we use protein intrinsic fluorescence and thioflavin T probe fluorescence in a total internal reflection fluorescence (TIRF) sampling geometry to simultaneously monitor the kinetics of adsorption and aggregation for chicken egg lysozyme on a silica surface. We observe a slow surface-induced aggregation process that continues well after the lysozyme adsorption kinetics have plateaued. The rate of surface-induced aggregation is independent of the lysozyme concentration in solution. Consistent with the clustering observed via thioflavin T fluorescence, infrared amide I band spectra also show a 1.5-fold increase in intermolecular beta-sheet content upon lysozyme adsorption. Tryptophan emission spectra show no evidence for any tertiary structural change upon adsorption. Furthermore, we observe that the covalent modification of lysozyme with a single poly(ethylene glycol) (PEG) grafted chain does not inhibit aggregation on the surface, but a second PEG graft significantly inhibits the intermolecular beta-sheet formation.

Loading behavior of {chitosan/hyaluronic acid}n layer-by-layer assembly films toward myoglobin: an electrochemical study

When {CS/HA}n layer-by-layer films assembled by oppositely charged chitosan (CS) and hyaluronic acid (HA) were immersed in myoglobin (Mb) solution at pH 5.0, Mb was gradually loaded into the {CS/HA}n films, designated as {CS/HA}n-Mb. The cyclic voltammetric (CV) peak pair of Mb FeIII/FeII redox couple for {CS/HA}n-Mb films on pyrolytic graphite (PG) electrodes was used to investigate the loading behavior of {CS/HA}n films toward Mb. The various influencing factors, such as the number of bilayers (n), the pH of Mb loading solution, and the ionic strength of solution, were investigated by different electrochemical methods and other techniques. The results showed that the main driving force for the bulk loading of Mb was most probably the electrostatic interaction between oppositely charged Mb in solution and HA in the films, while other interactions such as hydrogen bonding and hydrophobic interaction may also play an important role. Other polyelectrolyte multilayer (PEM) films with different components were compared with {CS/HA}n films in permeability and Mb loading, and electroactive probes with different size and surface charge were compared in their incorporation into PEM films. The results suggest that due to the unique structure of CS and HA, {CS/HA}n films with relatively low charge density are packed more loosely and more easily swelled by water, and have better permeability, which may lead to the higher loading amount and shorter loading time for Mb. The protein-loaded PEM films provide a new route to immobilize redox proteins on electrodes and realize the direct electrochemistry of the proteins.

Amphoteric surface hydrogels derived from hydrogen-bonded multilayers: reversible loading of dyes and macromolecules

We used hydrogen-bonded multilayers of poly(N-vinylpyrrolidone) (PVPON) and poly(methacrylic acid) (PMAA) as precursors for producing surface-bound hydrogels and studied their pH-dependent swelling and protein uptake behavior using in situ attenuated total reflection Fourier transform infrared spectroscopy and in situ ellipsometry. The hydrogels were produced by selective chemical cross-linking between PMAA units using carbodiimide chemistry and ethylenediamine (EDA) as a cross-linking reagent, followed by complete removal of PVPON from the film obtained by exposing the film to pH 7.5. As shown by in situ ellipsometry, hydrogels exhibit distinctive polyampholytic swelling as a function of pH, with minimum swelling at pH 4.2-5.7, and increased film thickness at both lower and higher pH values. Film swelling at lower pH values occurs as a result of the presence of amino groups within the hydrogels, which originate from the one-end attachment of the EDA cross-linker to PMAA chains. The pH-switching of hydrogel swelling was fast and reversible. The degree of hydrogel swelling could be also controlled by varying the time allowed for cross-linking. The produced hydrogels were able to absorb large amounts of dyes and proteins of opposite charge reversibly, in response to pH variations. Finally, we demonstrate that proteins included within the hydrogel can easily be replaced with linear polycations. These surface hydrogels hold promise for bioseparation and controlled delivery applications.

Immobilization of enamel matrix derivate protein onto polypeptide multilayers. Comparative in situ measurements using ellipsometry, quartz crystal microbalance with dissipation, and dual-polarization interferometry

The buildup of biodegradable poly(L-glutamic acid) (PGA) and poly(L-lysine) (PLL) multilayers on silica and titanium surfaces and the immobilization of enamel matrix derivate (EMD) protein was followed by utilizing in situ ellipsometry, quartz crystal microbalance with dissipation, and dual-polarization interferometry (DPI). The use of the relatively new DPI technique validated earlier published ellipsometry measurements of the PLL-PGA polypeptide films. The hydrophobic aggregating EMD protein was successfully immobilized both on top of and within the multilayer structures at pH 5.0. DPI measurements further indicated that the immobilization of EMD is influenced by the flow pattern during adsorption. The formed polypeptide-EMD multilayer films are of interest since it is known that EMD is able to trigger cell response and induce biomineralization. The multilayer films thus have potential to be useful as bioactive and biodegradable coatings for future dental implants.

The effect of the layer structure on the activity of immobilized enzymes in ultrathin films

The molecular engineering capability of the layer-by-layer (LbL) method for fabricating thin films has been exploited in order to immobilize glucose oxidase (GOD) in films with alternating layers of chitosan. Chitosan was proven a good scaffolding material, as GOD molecules preserved their catalytic activity towards glucose oxidation. Using electrochemical measurements, we showed that chitosan/GOD LbL films can be used to detect glucose with a limit of detection of 0.2 mmol l-1 and an activity of 40.5 microA mmol-1 L microg-1, which is highly sensitive when compared to other sensors in previous reports in the literature. The highest sensitivity of the LbL film was achieved when only the top layer contained GOD, thus indicating that GOD in inner layers did not contribute to glucose oxidation, probably because it hampers analyte diffusion and electron transport through the deposited layers. This may be explained by the dense packing of GOD molecules in the LbL films with chitosan, as inferred from estimates of the amount of GOD adsorbed per layer using a quartz crystal microbalance.

Fabrication of phytic acid sensor based on mixed phytase-lipid Langmuir-Blodgett films

This paper reports the surface activity of phytase at the air-water interface, its interaction with lipid monolayers, and the construction of a new phytic acid biosensor on the basis of the Langmuir-Blodgett (LB) technique. Phytase was inserted in the subphase solution of dipalmitoylphosphatidylglycerol (DPPG) Langmuir monolayers, and its incorporation to the air-water interface was monitored with surface pressure measurements. Phytase was able to incorporate into DPPG monolayers even at high surface pressures, ca. 30 mN/m, under controlled ionic strength, pH, and temperature. Mixed Langmuir monolayers of phytase and DPPG were characterized by surface pressure-area and surface potential-area isotherms, and the presence of the enzyme provided an expansion in the monolayers (when compared to the pure lipid at the interface). The enzyme incorporation also led to significant changes in the equilibrium surface compressibility (in-plane elasticity), especially in liquid-expanded and liquid-condensed regions. The dynamic surface elasticity for phytase-containing interfaces was investigated using harmonic oscillation and axisymmetric drop shape analysis. The insertion of the enzyme at DPPG monolayers caused an increase in the dynamic surface elasticity at 30 mN m(-)(1), indicating a strong interaction between the enzyme and lipid molecules at a high-surface packing. Langmuir-Blodgett (LB) films containing 35 layers of mixed phytase-DPPG were characterized by ultraviolet-visible and fluorescence spectroscopy and crystal quartz microbalance nanogravimetry. The ability in detecting phytic acid was studied with voltammetric measurements.

In situ synthesis of sulfide-coated polystyrene composites for the fabrication of photonic crystals

Sulfide (CdS, ZnS, and SnS(2))-coated polystyrene (PS) nanocomposites with a diameter of about 160 nm were synthesized by an in situ synthesis method. The PS spheres adsorbed polyelectrolytes, which were coordinated with Cd(2+) and Zn(2+) reacted with sulfions released through the hydrolysis of thioacetamide in an aqueous bath. As to the SnS(2)-coated PS composite, we introduced a deposition method in which a thin layer of SnS(2) was deposited on the surface of PS spheres. The PS spheres assembled on the patterned substrate of porous aluminum oxide (PAO) were more regular than those on the nonpatterned microslide, so the PS spheres coated with CdS and ZnS composites were assembled into ordered arrays on the PAO substrate, respectively. And the obtained lambda(max) of CdS-coated PS colloid crystal array red-shifted 262 nm compared with that of the pure PS colloid crystal array. All the particles and colloid crystal arrays were characterized by transmission electron microscopy (TEM) and scanning electron microscopy (SEM). Energy-dispersive X-ray (EDX) was undertaken to determine the elements Cd, S, and Sn.

Adsorption-induced conformational changes of proteins onto ceramic particles: Differential scanning calorimetry and FTIR analysis

Three model proteins, bovine serum albumin, hen's egg lysozyme and bovine serum fibrinogen, were adsorbed from aqueous solution onto finely dispersed ceramic particles, namely different kinds of alumina and hydroxyapatite particles. The influence of adsorption on protein secondary structure was investigated. The FTIR spectroscopic findings were compared with the results of DSC measurements. In almost all cases it was found that adsorption results in destabilisation and structural loss of the bound protein. A decrease in transition enthalpy is correlated with a loss in alpha-helical structure, which seems to be the most sensitive structure on adsorption-induced rearrangements. A total collapse of structure in the adsorbed proteins was not determined on any ceramic surface. Some residual structure is always retained. Structural changes in the D- or E-domains of fibrinogen could be independently observed by two different calorimetric signals. The two techniques applied in the present study -- micro-DSC and FTIR spectroscopy -- can be concluded to provide complementary information on adsorption-induced structural changes on both the molecular (thermal stability, overall structure) and the sub-molecular level (secondary structure).

Stability of Helix-Rich Proteins at High Concentrations

A number of techniques, including circular dichroism, FTIR, front face fluorescence, and UV absorption spectrophotometries, dynamic light scattering, and DSC, were used to directly measure the colloidal and conformational stability of proteins in highly concentrated solutions. Using bovine serum albumin (BSA), chicken egg white lysozyme, human hemoglobin A0, and bovine fibrinogen as model proteins, the thermal transition temperatures of proteins in dilute and concentrated solutions were compared. At 10 degrees C, no significant differences in both secondary and tertiary structures were detected for proteins at different concentrations. When temperature was introduced as a variable, however, hemoglobin and fibrinogen demonstrated higher transition midpoints (T(m)s) in concentrated rather than in dilute solutions (deltaT(m) approximately 2-10 degrees C). In contrast, lysozyme and BSA in concentrated solutions exhibit a lower T(m) than in dilute solutions (deltaT(m) approximately 2-20 degrees C). From these studies, it appears that a variety of factors determine the effect of high concentrations on the colloidal and conformational stability of a particular protein. While the prediction of excluded volume theory is that high concentrations should conformationally stabilize proteins, other factors such as pH, kinetics, protein dynamics, and intermolecular charge-charge effects may affect the overall stability of proteins at high concentrations under certain conditions.

Partial poly(glutamic acid) <--> poly(aspartic acid) exchange in layer-by-layer polyelectrolyte films. Structural alterations in the three-component architectures

Layer-by-layer (LBL) polyelectrolyte films were constructed from poly(L-glutamic acid) (PGA) and poly(L-aspartic acid) (PAA) as polyanions, and from poly(L-lysine) (PLL) as the polycation. The terminating layer of the films was always PLL. According to attenuated total reflection Fourier transform infrared measurements, the PGA/PLL and PAA/PLL films, despite their chemical similarity, had largely different secondary structures. Extended beta-sheets dominated the PGA/PLL films, while alpha-helices and intramolecular beta-sheets dominated the PAA/PLL films. The secondary structure of the polyelectrolyte film affected the adsorption of human serum albumin (HSA) as well. HSA preserved its native secondary structure on the PGA/PLL film, but it became largely deformed on PAA/PLL films. Both PGA and PAA were able to extrude to a certain extent the other polyanion from the films, but the structural consequences were different. Adding PAA to a (PGA/PLL)5-PGA film resulted in a simple exchange and incorporation: PGA/PLL and PAA/PLL complexes coexisted with their unaltered secondary structures in the mixed film. The incorporation of PGA into a (PAA/PLL)5-PAA film was up to 50% and caused additional beta-structure increase in the secondary structure of the film. The proportions of the two polyanions were roughly the same on the surfaces and in the interiors of the films, indicating practically free diffusion for both polyanions. The abundance of PAA/PLL and PGA/PLL domains on the film surfaces was monitored by the analysis of the amide I region of the infrared spectrum of a reporter molecule, HSA, adsorbed onto the three-component polyelectrolyte films.

Polyelectrolyte Films Based on Polysaccharides of Different Conformations: Effects on Multilayer Structure and Mechanical Properties

Ultrathin films were prepared with cationic poly(allylamine hydrochloride) (PAH) and two anionic polysaccharides, iota- and lambda-carrageenan, of similar chemical composition but different conformations using the layer-by-layer (LbL) technique. The study of aqueous solutions of carrageenans confirms that iota-carrageenan is at room temperature in helical conformation while lambda-carrageenan is in random coil conformation. Characterization of the multilayers by ellipsometry, circular dichroism, and AFM revealed that iota-carrageenan keeps its helical conformation within the films while lambda-carrageenan chains are in random coil conformation. Investigation of the mechanical properties of the films by performing nanoindentation experiments using force spectroscopy showed clear differences between the two films based on carrageenans of different conformations.

Preparation of ultrathin self-standing polyelectrolyte multilayer membranes at physiological conditions using pH-responsive film segments as sacrificial layers

A new system to obtain ultrathin self-standing polyelectrolyte multilayer membranes at physiological conditions is introduced. On the surface of a substrate, a hybrid film structure composed of two compartments, (1) a pH-responsive film segment formed via hydrogen bonds and (2) a polyelectrolyte multilayer film on top of 1, was assembled. The pH-responsive polymer multilayer segments disintegrate at a neutral pH and release self-standing polyelectrolyte multilayer films. The obtained self-supporting polyelectrolyte multilayer membranes had thicknesses of 55 to several hundred nanometers and areas of a few square centimeters, approximately. The preparation method introduced here avoids harsh release conditions and thus broadens the choice of materials that can be incorporated into the self-standing film.

A novel layer-by-layer approach for the fabrication of conducting polymer/RNA multilayer films for controlled release

Poly(anilineboronic acid) (PABA)/ribonucleic acid (RNA) multilayer films were prepared under neutral condition using a layer-by-layer deposition of PABA and RNA. RNA was used both as a polyelectrolyte for multilayer formation as well as dopant for PABA. Photoelastic modulated infrared reflection absorption spectroscopy measurements suggest that PABA interacts covalently with RNA through the formation of a boronate ester, a boron-nitrogen dative bond, as well as electrostatic interactions of anionic phosphates with cationic amines. The deposition procedure was monitored with UV-vis absorption spectroscopy, showing a linear dependence of absorbance with the number of PABA/RNA bilayers deposited. The multilayer films were further characterized using X-ray photoelectron spectroscopy and ellipsometry, which yielded a PABA/RNA bilayer thickness of approximately 10 nm. The PABA/RNA multilayer films are redox-active at neutral pH, consistent with the formation of a self-doped polymer. Electrochemical control of PABA under these conditions allows potential-induced controlled release of RNA from a multilayer at neutral pH, suggesting that this may serve as a novel method for controlled release of RNA under physiological conditions.

Raman and surface enhanced Raman microscopy of microstructured polyethylenimine/DNA multilayers

We analyze microstructured multilayer films of poly(ethyleneimine) (PEI) and DNA by employing Raman and surface enhanced Raman spectroscopy (SERS). The microstructuring of the samples allows a simultaneous measurement of signal and reference in a single analytic process. Silver nanoparticles are implemented in the microstructured multilayers for SERS measurements. The recorded SERS spectra of PEI/DNA are dominated by the Raman bands of the DNA bases which show a larger mean enhancement than bands belonging to DNA backbone vibrations. Our results show that the combination of SERS and microstructured multilayer films provides an adapted way to characterize the polyelectrolytes as well as to measure the enhancement factor and the distance dependence for the SERS active silver nanoparticles. Furthermore, microstructured polyelectrolyte films containing SERS active nanoparticles are used for sensing molecules.

Vibrational Spectroscopic Studies on Fibrinogen Adsorption at Polystyrene/Protein Solution Interfaces: Hydrophobic Side Chain and Secondary Structure Changes

Structural changes of fibrinogen after adsorption to polystyrene (PS) were examined at the PS/protein solution interface in situ using sum frequency generation (SFG) vibrational spectroscopy and attenuated total reflection Fourier transform infrared spectroscopy (ATR-FTIR). Different behaviors of hydrophobic side chains and secondary structures of adsorbed fibrinogen molecules have been observed. Our results indicate that upon adsorption, the hydrophobic PS surface induces fast structural changes of fibrinogen molecules by aligning some hydrophobic side chains in fibrinogen so that they face to the surface. Such structural changes of fibrinogen hydrophobic side chains are local changes and do not immediately induce significant changes of the protein secondary structures. Our research also shows that the interactions between adsorbed fibrinogen and the PS surface can induce significant changes of protein secondary structures or global conformations which occur on a much longer time scale.