Fluorescence-modified superparamagnetic nanoparticles: intracellular uptake and use in cellular imaging

Magnetoliposomes and their potential in the intelligent drug-delivery field

Research advancements for magnetically guided drug delivery encompass not only the improvement of the design, synthesis and evaluation of more selective nanomaterials bearing magnetic properties, but also the optimization of the transport and delivery of magnetic agents. Such versatile platforms can be utilized for simultaneously carrying therapeutics and diagnostics.

Make conjugation simple: a facile approach to integrated nanostructures

We report a facile approach to the conjugation of protein-encapsulated gold fluorescent nanoclusters to the iron oxide nanoparticles through catechol reaction. This method eliminates the use of chemical linkers and can be readily extended to the conjugation of biological molecules and other nanomaterials onto nanoparticle surfaces. The key to the success was producing water-soluble iron oxide nanoparticles with active catechol groups. Further, advanced electron microscopy analysis of the integrated gold nanoclusters and iron oxide nanoparticles provided direct evidence of the presence of a single fluorescent nanocluster per protein template. Interestingly, the integrated nanoparticles exhibited enhanced fluorescent emission in biological media. These studies will provide significantly practical value in chemical conjugation, the development of multifunctional nanostructures, and exploration of multifunctional nanoparticles for biological applications.

Advancement in multifunctional nanoparticles for the effective treatment of cancer

INTRODUCTION

Nanotechnology has gained wider importance for the treatment of various diseases, including cancer. Multifunctional or theranostic agents are emerging as promising therapeutic paradigms, which provide attractive vehicles for both image and therapeutic agents. Nanosystems are capable of diagnosis, specific targeted drug therapy and monitoring therapeutic response. Due to their well-developed surface nature, nanomolecules are easy to anchor with multifunctional groups.

AREAS COVERED

The present review aims to give an extensive account on the progress of multifunctional nanoparticles throughout the blooming research with regards to their clinical application in cancer. This paper discusses graphene, a newly developed multifunctional vehicle in nanotechnology. Furthermore, it focuses on the development of tumor cells, the advantages of novel multifunctional nanoparticles over traditional methods and the use of nanoparticles in cancer therapy. In addition, patents issued by the US office are also included.

EXPERT OPINION

Despite numerous advantages, multifunctional nanoparticles are still at an infancy stage. Many great achievements have been attained in this field to date, but many challenges still remain. A problem that limits the use of multifunctional nanoparticles is toxicity. If this toxicity can be overcome then the advancement in nanocomposite material science will be well on the way to a prospective treatment of cancer.

Near-infrared fluorescence labeling of iron nanoparticles and applications for cell labeling and in vivo imaging

In recent years, the near-infrared fluorescence (NIRF) labeled iron nanoparticles were synthesized and applied to labeling human cells for monitoring the engraftment process, imaging tumors, testing intracellular molecular environment surrounding the nanoparticles, and tracing biodistribution of nanoparticles in vivo. These studies demonstrated that the NIRF-labeled iron nanoparticles provided an excellent method not only for cell labeling but also for in vivo monitoring and tracing of iron nanoparticles due to the excellent in vivo imaging performance of the NIR fluorophores. However, the availability of commercial iron nanoparticles labeled with suitable NIRF dyes is limited. Optimal wavelength for in vivo imaging is centered at 800 nm, where tissue autofluorescence is minimal. Here we describe the manufacture of 12-nm 3-dimercaptosuccinic acid-coated Fe(3)O(4) magnetic nanoparticles, their labeling with a new near-infrared fluorophore, IRDye800CW (excitation/emission: 778/806 nm), and their applications for cell labeling and in vivo imaging.

Role of engineered nanocarriers for axon regeneration and guidance: current status and future trends

There are approximately 1.5 million people who experience traumatic injuries to the brain and 265,000 who experience traumatic injuries to the spinal cord each year in the United States. Currently, there are few effective treatments for central nervous system (CNS) injuries because the CNS is refractory to axonal regeneration and relatively inaccessible to many pharmacological treatments. Smart, remotely tunable, multifunctional micro- and nanocarriers hold promise for delivering treatments to the CNS and targeting specific neurons to enhance axon regeneration and synaptogenesis. Furthermore, assessing the efficacy of treatments could be enhanced by biocompatible nanovectors designed for imaging in vivo. Recent developments in nanoengineering offer promising alternatives for designing biocompatible micro- and nanovectors, including magnetic nanostructures, carbon nanotubes, and quantum dot-based systems for controlled release of therapeutic and diagnostic agents to targeted CNS cells. This review highlights recent achievements in the development of smart nanostructures to overcome the existing challenges for treating CNS injuries.

Nanoparticle induced cell magneto-rotation: monitoring morphology, stress and drug sensitivity of a suspended single cancer cell

Single cell analysis has allowed critical discoveries in drug testing, immunobiology and stem cell research. In addition, a change from two to three dimensional growth conditions radically affects cell behavior. This already resulted in new observations on gene expression and communication networks and in better predictions of cell responses to their environment. However, it is still difficult to study the size and shape of single cells that are freely suspended, where morphological changes are highly significant. Described here is a new method for quantitative real time monitoring of cell size and morphology, on single live suspended cancer cells, unconfined in three dimensions. The precision is comparable to that of the best optical microscopes, but, in contrast, there is no need for confining the cell to the imaging plane. The here first introduced cell magnetorotation (CM) method is made possible by nanoparticle induced cell magnetization. By using a rotating magnetic field, the magnetically labeled cell is actively rotated, and the rotational period is measured in real-time. A change in morphology induces a change in the rotational period of the suspended cell (e.g. when the cell gets bigger it rotates slower). The ability to monitor, in real time, cell swelling or death, at the single cell level, is demonstrated. This method could thus be used for multiplexed real time single cell morphology analysis, with implications for drug testing, drug discovery, genomics and three-dimensional culturing.

Bifunctional nanoparticles with fluorescence and magnetism via surface-initiated AGET ATRP mediated by an iron catalyst

Fluorescent/magnetic nanoparticles are of interest in many applications in biotechnology and nanomedicine for its living detection. In this study, a novel method of surface modification of nanoparticles was first used to modify a fluorescent monomer on the surfaces of magnetic nanoparticles directly. This was achieved via iron(III)-mediated atom-transfer radical polymerization with activators generated by electron transfer (AGET ATRP). Fluorescent monomer 9-(4-vinylbenzyl)-9H-carbazole (VBK) was synthesized and was grafted from magnetic nanoparticles (ferroferric oxide) via AGET ATRP using FeCl(3)·6H(2)O as the catalyst, tris(3,6-dioxaheptyl)amine (TDA-1) as the ligand, and ascorbic acid (AsAc) as the reducing agent. The initiator for ATRP was modified on magnetic nanoparticles with the reported method: ligand exchange with 3-aminopropyltriethoxysilane (APTES) and then esterification with 2-bromoisobutyryl bromide. After polymerization, a well-defined nanocomposite (Fe(3)O(4)@PVBK) was yielded with a magnetic core and a fluorescent shell (PVBK). Subsequently, well-dispersed bifunctional nanoparticles (Fe(3)O(4)@PVBK-b-P(PEGMA)) in water were obtained via consecutive AGET ATRP of hydrophilic monomer poly(ethylene glycol) methyl ether methacrylate (PEGMA). The chemical composition of the magnetic nanoparticles' surface at different surface modification stages was investigated with Fourier transform infrared (FT-IR) spectra. The magnetic and fluorescent properties were validated with a vibrating sample magnetometer (VSM) and a fluorophotometer. The Fe(3)O(4)@PVBK-b-P(PEGMA) nanoparticles showed an effective imaging ability in enhancing the negative contrast in magnetic resonance imaging (MRI).

One step continuous hydrothermal synthesis of very fine stabilized superparamagnetic nanoparticles of magnetite

Stable suspensions of citrated SPIO nanoparticles were synthesised in one step using a hydrothermal continuous process. Citrates control the crystallite size and the oxidation degree of metallic ions despite the very short reaction time (4 s). Magnetite particles, Fe(2.94)O(4), with an average size of 4 nm and good monodispersity were obtained.

Engineered nanoparticles for biomolecular imaging

In recent years, the production of nanoparticles (NPs) and exploration of their unusual properties have attracted the attention of physicists, chemists, biologists and engineers. Interest in NPs arises from the fact that the mechanical, chemical, electrical, optical, magnetic, electro-optical and magneto-optical properties of these particles are different from their bulk properties and depend on the particle size. There are numerous areas where nanoparticulate systems are of scientific and technological interest, particularly in biomedicine where the emergence of NPs with specific properties (e.g. magnetic and fluorescence) for contrast agents can lead to advancing the understanding of biological processes at the biomolecular level. This review will cover a full description of the physics of various imaging methods, including MRI, optical techniques, X-rays and CT. In addition, the effect of NPs on the improvement of the mentioned non-invasive imaging methods will be discussed together with their advantages and disadvantages. A detailed discussion will also be provided on the recent advances in imaging agents, such as fluorescent dye-doped silica NPs, quantum dots, gold- and engineered polymeric-NPs, superparamagnetic iron oxide NPs (SPIONs), and multimodal NPs (i.e. nanomaterials that are active in both MRI and optical methods), which are employed to overcome many of the limitations of conventional contrast agents (e.g. gadolinium).

The synthesis and bio-applications of magnetic and fluorescent bifunctional composite nanoparticles

Magnetic-fluorescent composite nanoparticles as a new kind of nanoparticle have attracted much attention in recent years. The composite nanoparticles combine the fluorescent properties, magnetic properties and the physical properties of nano-size, so they can offer a range of potential applications, such as bioseparation and bio-imaging, tumor cell localization, and even cancer treatment. This Minireview will introduce the main synthesis strategies for the fabrication of magnetic-fluorescent composite nanoparticles, the current and potential bio-application of magnetic-fluorescent nanocomposites, including protein and DNA separation and detection, bio-imaging and sorting in vitro and in vivo, drug delivery and the cancer treatment.

Multifunctional nanoparticles for dual imaging

For imaging with different modalities, labels, which provide contrast for all modalities, are required. Colloidal nanoparticles composed out of an inorganic core and a polymer shell offer progress in this direction. Both, the core and the polymer shell, can be synthesized to be fluorescent, magnetic, or radioactive. When different cores are combined with different polymer shells, different types of particles for dual imaging can be obtained, as for example, fluorescent cores with radioactive polymer shells. Properties and perspectives of such nanoparticles for multimodal imaging are discussed.

Fluorescent-magnetic-biotargeting multifunctional nanobioprobes for detecting and isolating multiple types of tumor cells

Fluorescent-magnetic-biotargeting multifunctional nanobioprobes (FMBMNs) have attracted great attention in recent years due to their increasing, important applications in biomedical research, clinical diagnosis, and biomedicine. We have previously developed such nanobioprobes for the detection and isolation of a single kind of tumor cells. Detection and isolation of multiple tumor markers or tumor cells from complex samples sensitively and with high efficiency is critical for the early diagnosis of tumors, especially malignant tumors or cancers, which will improve clinical diagnosis outcomes and help to select effective treatment approaches. Here, we expanded the application of the monoclonal antibody (mAb)-coupled FMBMNs for multiplexed assays. Multiple types of cancer cells, such as leukemia cells and prostate cancer cells, were detected and collected from mixed samples within 25 min by using a magnet and an ordinary fluorescence microscope. The capture efficiencies of mAb-coupled FMBMNs for the above-mentioned two types of cells were 96% and 97%, respectively. Furthermore, by using the mAb-coupled FMBMNs, specific and sensitive detection and rapid separation of a small number of spiked leukemia cells and prostate cancer cells in a large population of cultured normal cells (about 0.01% were tumor cells) were achieved simply and inexpensively without any sample pretreatment before cell analysis. Therefore, mAb-coupled multicolor FMBMNs may be used for very sensitive detection and rapid isolation of multiple cancer cells in biomedical research and medical diagnostics.

Microwave assisted nanoparticle surface functionalization

We introduce the input of microwave energy to elaborate a multimodal magnetic nanoplatform. This magnetic nanomaterial consists of superparamagnetic γFe(2)O(3) nanoparticles conjugated to hydroxymethylene bisphosphonate (HMBP) molecules with an amine function as the terminal group. The feasibility of such a process is illustrated by the coupling of Rhodamine B to the hybrid magnetic nanomaterial. Using a microwave we manage to have approximately a 50 fold increase in molecules per nanoparticle compared to conventional procedures. Moreover we show that the amount of Rhodamine on the nanoparticle surface could be tuned using various stoichiometric ratios. The presence of Rhodamine B on the nanoparticle surface provides an amphiphilic character to facilitate penetration into the cells.

Manufacture of IRDye800CW-coupled Fe3O4 nanoparticles and their applications in cell labeling and in vivo imaging

BACKGROUND

In recent years, near-infrared fluorescence (NIRF)-labeled iron nanoparticles have been synthesized and applied in a number of applications, including the labeling of human cells for monitoring the engraftment process, imaging tumors, sensoring the in vivo molecular environment surrounding nanoparticles and tracing their in vivo biodistribution. These studies demonstrate that NIRF-labeled iron nanoparticles provide an efficient probe for cell labeling. Furthermore, the in vivo imaging studies show excellent performance of the NIR fluorophores. However, there is a limited selection of NIRF-labeled iron nanoparticles with an optimal wavelength for imaging around 800 nm, where tissue autofluorescence is minimal. Therefore, it is necessary to develop additional alternative NIRF-labeled iron nanoparticles for application in this area.

RESULTS

This study manufactured 12-nm DMSA-coated Fe3O4 nanoparticles labeled with a near-infrared fluorophore, IRDye800CW (excitation/emission, 774/789 nm), to investigate their applicability in cell labeling and in vivo imaging. The mouse macrophage RAW264.7 was labeled with IRDye800CW-labeled Fe3O4 nanoparticles at concentrations of 20, 30, 40, 50, 60, 80 and 100 μg/ml for 24 h. The results revealed that the cells were efficiently labeled by the nanoparticles, without any significant effect on cell viability. The nanoparticles were injected into the mouse via the tail vein, at dosages of 2 or 5 mg/kg body weight, and the mouse was discontinuously imaged for 24 h. The results demonstrated that the nanoparticles gradually accumulated in liver and kidney regions following injection, reaching maximum concentrations at 6 h post-injection, following which they were gradually removed from these regions. After tracing the nanoparticles throughout the body it was revealed that they mainly distributed in three organs, the liver, spleen and kidney. Real-time live-body imaging effectively reported the dynamic process of the biodistribution and clearance of the nanoparticles in vivo.

CONCLUSION

IRDye800CW-labeled Fe3O4 nanoparticles provide an effective probe for cell-labeling and in vivo imaging.

Bifunctional nanocomposites with magnetic and luminescence properties

Many applications require nanoparticles that exhibit high magnetic moment and luminescence. Compounds exhibiting this combination of properties do not exist. However, this combination of properties may be obtained by nanocomposites. There are two possible configurations for these composites: the core-shell design, leading to the smallest composite particles, and agglomerates containing separated particles with the properties in question. The magnetic core is, in most cases, maghemite or magnetite, whereas the luminescence carrier is either an organic molecule or an inorganic quantum dot. One of the basic problems in designing such composites, to be overcome by the appropriate layout choice, is the potential incompatibility between the magnetic core and the lumophore. Experimentally realized solutions of these problems are presented.

Strategies for the intracellular delivery of nanoparticles

The ability to target contrast agents and therapeutics inside cells is becoming important as we strive to decipher the complex network of events that occur within living cells and design therapies that can modulate these processes. Nanotechnology researchers have generated a growing list of nanoparticles designed for such applications. These particles can be assembled from a variety of materials into desirable geometries and configurations and possess useful properties and functionalities. Undoubtedly, the effective delivery of these nanomaterials into cells will be critical to their applications. In this tutorial review, we discuss the fundamental challenges of delivering nanoparticles into cells and to the targeted organelles, and summarize strategies that have been developed to-date.

Scope of nanotechnology in ovarian cancer therapeutics

This review describes the use of polymer micelle nanotechnology based chemotherapies for ovarian cancer. While various chemotherapeutic agents can be utilized to improve the survival rate of patients with ovarian cancer, their distribution throughout the entire body results in high normal organ toxicity. Polymer micelle nanotechnology aims to improve the therapeutic efficacy of anti-cancer drugs while minimizing the side effects. Herein, different types of polymer micelle technology based nanotherapies such as PLGA, polymerosomes, acid cleavable, thermosensitive, pH sensitive, and cross-linked micelles are introduced and structural differences are explained. Additionally, production methods, stability, sustainability, drug incorporation and drug release profiles of various polymer micelle based nanoformulations are discussed. An important feature of polymer micelle nanotechnology is the small size (10-100 nm) of particles which improves circulation and enables superior accumulation of the therapeutic drugs at the tumor sites. This review provides a comprehensive evaluation of different types of polymer micelles and their implications in ovarian cancer therapeutics.

Intracellular and extracellular T1 and T2 relaxivities of magneto-optical nanoparticles at experimental high fields

This study reports the T(1) and T(2) relaxation rates of rhodamine-labeled anionic magnetic nanoparticles determined at 7, 11.7, and 17.6 T both in solution and after cellular internalization. Therefore cells were incubated with rhodamine-labeled anionic magnetic nanoparticles and were prepared at decreasing concentrations. Additionally, rhodamine-labeled anionic magnetic nanoparticles in solution were used for extracellular measurements. T(1) and T(2) were determined at 7, 11.7, and 17.6 T. T(1) times were determined with an inversion-recovery snapshot-flash sequence. T(2) times were obtained from a multispin-echo sequence. Inductively coupled plasma-mass spectrometry was used to determine the iron content in all samples, and r(1) and r(2) were subsequently calculated. The results were then compared with cells labeled with AMI-25 and VSOP C-200. In solution, the r(1) and r(2) of rhodamine-labeled anionic magnetic nanoparticles were 4.78/379 (7 T), 3.28/389 (11.7 T), and 2.00/354 (17.6 T). In cells, the r(1) and r(2) were 0.21/56 (7 T), 0.19/37 (11.7 T), and 0.1/23 (17.6 T). This corresponded to an 11- to 23-fold decrease in r(1) and an 8- to 15-fold decrease in r(2) . A decrease in r(1) was observed for AMI-25 and VSOP C-200. AMI-25 and VSOP exhibited a 2- to 8-fold decrease in r(2) . In conclusion, cellular internalization of iron oxide nanoparticles strongly decreased their T(1) and T(2) potency.

Synthesis and characterization of functionalized magnetic maghemite nanoparticles with fluorescent probe capabilities for biological applications

Nanoparticles with innovative optical, chemical, and magnetic properties combined in a single nanoparticle may be useful as biosensors, targeting agents, and therapeutic agents in the biomedical field. This study describes new magnetic nanoparticles (MNPs) containing the fluorescent dye rhodamine isothiocyanate (RITC) covalently encapsulated within the nanoparticles. These nanoparticles have been prepared by nucleation followed by controlled growth of iron oxide layers onto iron oxide/gelatin-RITC nuclei. The formed RITC labeled MNPs (R-MNPs) are of narrow size distribution, exhibit the fluorescent spectrum of RITC, yet are more photostable. Because of the covalent encapsulation of RITC within the MNPs no detectable leakage of the fluorescent dye into the aqueous continuous phase was observed. This manuscript also demonstrates that the surface of the R-MNPs retains similar ligand binding efficiency as the equivalent nonfluorescent MNPs. Specific cell labeling was obtained by incubating glia cells with R-MNPs conjugated to glial cell line-derived neurotrophic factor (GDNF) protein. We further showed that the R-MNPs may be used for pH sensing between the pH range of 5 and 9. This feature may enable the use of the R-MNPs as a pH sensor of animal tissues and cell compartments. Thus, these functional narrow size distribution R-MNPs with both magnetic and fluorescent properties may provide an important research tool for biological sensing.

Surface modification, functionalization and bioconjugation of colloidal inorganic nanoparticles

Inorganic colloidal nanoparticles are very small, nanoscale objects with inorganic cores that are dispersed in a solvent. Depending on the material they consist of, nanoparticles can possess a number of different properties such as high electron density and strong optical absorption (e.g. metal particles, in particular Au), photoluminescence in the form of fluorescence (semiconductor quantum dots, e.g. CdSe or CdTe) or phosphorescence (doped oxide materials, e.g. Y(2)O(3)), or magnetic moment (e.g. iron oxide or cobalt nanoparticles). Prerequisite for every possible application is the proper surface functionalization of such nanoparticles, which determines their interaction with the environment. These interactions ultimately affect the colloidal stability of the particles, and may yield to a controlled assembly or to the delivery of nanoparticles to a target, e.g. by appropriate functional molecules on the particle surface. This work aims to review different strategies of surface modification and functionalization of inorganic colloidal nanoparticles with a special focus on the material systems gold and semiconductor nanoparticles, such as CdSe/ZnS. However, the discussed strategies are often of general nature and apply in the same way to nanoparticles of other materials.

Influence of the zeta potential on the sorption and toxicity of iron oxide nanoparticles on S. cerevisiae and E. coli

The influence of the zeta potential on the sorption between microorganisms (Saccharomyces cerevisiae and Escherichia coli) and iron oxide nanoparticles is demonstrated in a model salt solution at two different pH-values. There was only a 1% survival rate of E. coli (4.5 x 10(7)cells/mL) in the presence of 24 mg/L nanoparticulate iron oxide at pH 4. S. cerevisiae were less affected by the presence of the nanoparticulate iron oxide. The extent of iron oxide nanoparticle coverage on the surface of the microorganisms appears to be related to electrostatic interaction forces. Furthermore, the toxic effect of the nanoparticle concentration follows the sorption isotherm for E. coli. Based on the resulting hydrodynamic size distributions in the supernatant after sorption experiments, it could be shown that predominantly smaller particle aggregates oxide were sorbed onto E. coli. This was evident by a shift in the particle size distribution towards a larger mean particle size. The effect was observed to a lower extent for S. cerevisiae. The extent of iron oxide nanoparticle sorption on E. coli quickly reached a maximum and remained constant during a 24 h period compared to S. cerevisiae where sorption increased over time.

Magnetic force microscopy of iron oxide nanoparticles and their cellular uptake

Magnetic force microscopy has the capability to detect magnetic domains from a close distance, which can provide the magnetic force gradient image of the scanned samples and also simultaneously obtain atomic force microscope (AFM) topography image as well as AFM phase image. In this work, we demonstrate the use of magnetic force microscopy together with AFM topography and phase imaging for the characterization of magnetic iron oxide nanoparticles and their cellular uptake behavior with the MCF7 carcinoma breast epithelial cells. This method can provide useful information such as the magnetic responses of nanoparticles, nanoparticle spatial localization, cell morphology, and cell surface domains at the same time for better understanding magnetic nanoparticle-cell interaction. It would help to design magnetic-related new imaging, diagnostic and therapeutic methods.

Alternating Magnetic Field Controlled, Multifunctional Nano-Reservoirs: Intracellular Uptake and Improved Biocompatibility

Biocompatible magnetic nanoparticles hold great therapeutic potential, but conventional particles can be toxic. Here, we report the synthesis and alternating magnetic field dependent actuation of a remotely controllable, multifunctional nano-scale system and its marked biocompatibility with mammalian cells. Monodisperse, magnetic nanospheres based on thermo-sensitive polymer network poly(ethylene glycol) ethyl ether methacrylate-co-poly(ethylene glycol) methyl ether methacrylate were synthesized using free radical polymerization. Synthesized nanospheres have oscillating magnetic field induced thermo-reversible behavior; exhibiting desirable characteristics comparable to the widely used poly-N-isopropylacrylamide-based systems in shrinkage plus a broader volumetric transition range. Remote heating and model drug release were characterized for different field strengths. Nanospheres containing nanoparticles up to an iron concentration of 6 mM were readily taken up by neuron-like PC12 pheochromocytoma cells and had reduced toxicity compared to other surface modified magnetic nanocarriers. Furthermore, nanosphere exposure did not inhibit the extension of cellular processes (neurite outgrowth) even at high iron concentrations (6 mM), indicating minimal negative effects in cellular systems. Excellent intracellular uptake and enhanced biocompatibility coupled with the lack of deleterious effects on neurite outgrowth and prior Food and Drug Administration (FDA) approval of PEG-based carriers suggest increased therapeutic potential of this system for manipulating axon regeneration following nervous system injury.

Rapid and dynamic intracellular patterning of cell-internalized magnetic fluorescent nanoparticles

Conjugated magnetic nanoparticles have recently demonstrated potential in activating unique and specific activity within cells. Leveraging microfabrication, we have developed a technique of localizing nanoparticles to specific, subcellular locations by a micropatterned ferromagnetic substrate. Controlled patterns of nanoparticles were assembled and dynamically controlled with submicrometer precision within live cells. We anticipate that the technique will be useful as a compact, simple method of generating localizable, subcellular chemical and mechanical signals, compatible with standard microscopy.

Magnetic nanoparticles for theragnostics

Engineered magnetic nanoparticles (MNPs) represent a cutting-edge tool in medicine because they can be simultaneously functionalized and guided by a magnetic field. Use of MNPs has advanced magnetic resonance imaging (MRI), guided drug and gene delivery, magnetic hyperthermia cancer therapy, tissue engineering, cell tracking and bioseparation. Integrative therapeutic and diagnostic (i.e., theragnostic) applications have emerged with MNP use, such as MRI-guided cell replacement therapy or MRI-based imaging of cancer-specific gene delivery. However, mounting evidence suggests that certain properties of nanoparticles (e.g., enhanced reactive area, ability to cross cell and tissue barriers, resistance to biodegradation) amplify their cytotoxic potential relative to molecular or bulk counterparts. Oxidative stress, a 3-tier paradigm of nanotoxicity, manifests in activation of reactive oxygen species (ROS) (tier I), followed by a proinflammatory response (tier II) and DNA damage leading to cellular apoptosis and mutagenesis (tier III). Invivo administered MNPs are quickly challenged by macrophages of the reticuloendothelial system (RES), resulting in not only neutralization of potential MNP toxicity but also reduced circulation time necessary for MNP efficacy. We discuss the role of MNP size, composition and surface chemistry in their intracellular uptake, biodistribution, macrophage recognition and cytotoxicity, and review current studies on MNP toxicity, caveats of nanotoxicity assessments and engineering strategies to optimize MNPs for biomedical use.