Surface patterning by microcontact chemistry

Layer-by-layer deposition of vesicles mediated by supramolecular interactions

Vesicles are dynamic supramolecular structures with a bilayer membrane consisting of lipids or synthetic amphiphiles enclosing an aqueous compartment. Lipid vesicles have often been considered as mimics for biological cells. In this paper, we present a novel strategy for the preparation of three-dimensional multilayered structures in which vesicles containing amphiphilic β-cyclodextrin are interconnected by proteins using cyclodextrin guests as bifunctional linker molecules. We compared two pairs of adhesion molecules for the immobilization of vesicles: mannose-concanavalin A and biotin-streptavidin. Microcontact printing and thiol-ene click chemistry were used to prepare suitable substrates for the vesicles. Successful immobilization of intact vesicles through the mannose-concanavalin A and biotin-streptavidin motifs was verified by fluorescence microscopy imaging and dynamic light scattering, while the vesicle adlayer was characterized by quartz crystal microbalance with dissipation monitoring. In the case of the biotin-streptavidin motif, up to six layers of intact vesicles could be immobilized in a layer-by-layer fashion using supramolecular interactions. The construction of vesicle multilayers guided by noncovalent vesicle-vesicle junctions can be taken as a minimal model for artificial biological tissue.

Squish and CuAAC: additive-free covalent monolayers of discrete molecules in seconds

A terminal alkyne is immobilized rapidly into a full monolayer by squishing a small volume of a solution of the alkyne between an azide-modified surface and a copper plate. The monolayer is covalently attached to the surface through a copper-catalyzed alkyne-azide cycloaddition (CuAAC) reaction, and the coverages of the immobilized electroactive alkyne species are quantified by cyclic voltammetry. A reaction time of less than 20 s is possible with no other reagents required. The procedure is effective under aerobic conditions using either an aqueous or aprotic organic solution of the alkyne (1-100 mM).

From the bottom up: dimensional control and characterization in molecular monolayers

Self-assembled monolayers are a unique class of nanostructured materials, with properties determined by their molecular lattice structures, as well as the interfaces with their substrates and environments. As with other nanostructured materials, defects and dimensionality play important roles in the physical, chemical, and biological properties of the monolayers. In this review, we discuss monolayer structures ranging from surfaces (two-dimensional) down to single molecules (zero-dimensional), with a focus on applications of each type of structure, and on techniques that enable characterization of monolayer physical properties down to the single-molecule scale.

Modification of surfaces by chemical transfer printing using chemically patterned stamps

The preparation of well-defined molecular monolayers and their patterning on the microscale and nanoscale are key aspects of surface science and chemical nanotechnology. In this article, we describe the modification of amine-functionalized surfaces using a new type of contact printing based on chemically patterned, flat PDMS stamps. The stamps have discrete areas with surface-bond tetrafluorophenol (TFP) groups, which allow the attachment of carboxylic acids in the presence of coupling agents such as diisopropylcarbodiimide (DIC). The generated active esters can be reacted by placing the stamps in contact with amine-functionalized surfaces. The process leads to the transfer of acyl residues from the stamp to the substrate and therefore to a covalent attachment. Patterning occurs because of the fact that reaction and transfer take place only in areas with TFP groups present on the stamp surface. Different types of amine-decorated surfaces were successfully modified, and the transfer was visualized by fluorescence microscopy. To the best of our knowledge, the covalent transfer printing (CTP) of an immobilized molecular monolayer from one surface to another surface is unprecedented.

An extremely simple and effective strategy to tailor the surface performance of inorganic substrates by two new photochemical reactions

This article reports on a new sequential strategy to fabricate monolayer functional organosilane films on inorganic substrate surfaces, and subsequently, to pattern them by two new photochemical reactions. (1) By using UV light (254 nm) plus dimethylformamide (DMF), a functional silane monolayer film could be fabricated quickly (within minutes) under ambient temperature. (2) The organic groups of the formed films became decomposed in a few minutes with UV irradiation coupled with a water solution of ammonium persulfate (APS). (3) When two photochemical reactions were sequentially combined, a high-quality patterned functional surface could be obtained thanks to the photomask.

Supramolecularly oriented immobilization of proteins using cucurbit[8]uril

A supramolecular strategy is used for oriented positioning of proteins on surfaces. A viologen-based guest molecule is attached to the surface, while a naphthol guest moiety is chemoselectively ligated to a yellow fluorescent protein. Cucurbit[8]uril (CB[8]) is used to link the proteins onto surfaces through specific charge-transfer interactions between naphthol and viologen inside the CB cavity. The assembly process is characterized using fluorescence and atomic force microscopy, surface plasmon resonance, IR-reflective absorption, and X-ray photoelectron spectroscopy measurements. Two different immobilization routes are followed to form patterns of the protein ternary complexes on the surfaces. Each immobilization route consists of three steps: (i) attaching the viologen to the glass using microcontact chemistry, (ii) blocking, and (iii) either incubation or microcontact printing of CB[8] and naphthol guests. In both cases uniform and stable fluorescent patterns are fabricated with a high signal-to-noise ratio. Control experiments confirm that CB[8] serves as a selective linking unit to form stable and homogeneous ternary surface-bound complexes as envisioned. The attachment of the yellow fluorescent protein complexes is shown to be reversible and reusable for assembly as studied using fluorescence microscopy.

Reversible and oriented immobilization of ferrocene-modified proteins

Adopting supramolecular chemistry for immobilization of proteins is an attractive strategy that entails reversibility and responsiveness to stimuli. The reversible and oriented immobilization and micropatterning of ferrocene-tagged yellow fluorescent proteins (Fc-YFPs) onto β-cyclodextrin (βCD) molecular printboards was characterized using surface plasmon resonance (SPR) spectroscopy and fluorescence microscopy in combination with electrochemistry. The proteins were assembled on the surface through the specific supramolecular host-guest interaction between βCD and ferrocene. Application of a dynamic covalent disulfide lock between two YFP proteins resulted in a switch from monovalent to divalent ferrocene interactions with the βCD surface, yielding a more stable protein immobilization. The SPR titration data for the protein immobilization were fitted to a 1:1 Langmuir-type model, yielding K(LM) = 2.5 × 10(5) M(-1) and K(i,s) = 1.2 × 10(3) M(-1), which compares favorably to the intrinsic binding constant presented in the literature for the monovalent interaction of ferrocene with βCD self-assembled monolayers. In addition, the SPR binding experiments were qualitatively simulated, confirming the binding of Fc-YFP in both divalent and monovalent fashion to the βCD monolayers. The Fc-YFPs could be patterned on βCD surfaces in uniform monolayers, as revealed using fluorescence microscopy and atomic force microscopy measurements. Both fluorescence microscopy imaging and SPR measurements were carried out with the in situ capability to perform cyclic voltammetry and chronoamperometry. These studies emphasize the repetitive desorption and adsorption of the ferrocene-tagged proteins from the βCD surface upon electrochemical oxidation and reduction, respectively.

Generic top-functionalization of patterned antifouling zwitterionic polymers on indium tin oxide

This paper presents a novel surface engineering approach that combines photochemical grafting and surface-initiated atom transfer radical polymerization (SI-ATRP) to attach zwitterionic polymer brushes onto indium tin oxide (ITO) substrates. The photochemically grafted hydroxyl-terminated organic layer serves as an excellent platform for initiator attachment, and the zwitterionic polymer generated via subsequent SI-ATRP exhibits very good antifouling properties. Patterned polymer coatings can be obtained when the surface with covalently attached initiator was subjected to photomasked UV-irradiation, in which the C-Br bond that is present in the initiator was broken upon exposure to UV light. A further, highly versatile top-functionalization of the zwitterionic polymer brush was achieved by a strain-promoted alkyne-azide cycloaddition, without compromising its antifouling property. The attached bioligand (here: biotin) enables the specific immobilization of target proteins in a spatially confined fashion, pointing to future applications of this approach in the design of micropatterned sensing platforms on ITO substrates.