Sequence-controlled methacrylic multiblock copolymers via sulfur-free RAFT emulsion polymerization

The future directions of synthetic chemistry

After being developed over hundred years, synthetic chemistry has created numerous new molecules and new materials to support a better life welfare. Even so, many challenges still remain in synthetic chemistry, higher selectivity, higher efficiency, environmental benign and sustainable energy are never been so wistful before. Herein, several topics surrounded the ability improvement of synthesis and the application enhancement of synthesis will be briefly discussed.

Generation and Characterization of a Library of Novel Biologically Active Functional Surfactants (Surfmers) Using Combined High-Throughput Methods

We report the first successful combination of three distinct high-throughput techniques to deliver the accelerated design, synthesis, and property screening of a library of novel, bio-instructive, polymeric, comb-graft surfactants. These three-dimensional, surface-active materials were successfully used to control the surface properties of particles by forming a unimolecular deep layer on the surface of the particles via microfluidic processing. This strategy deliberately utilizes the surfactant to both create the stable particles and deliver a desired cell-instructive behavior. Therefore, these specifically designed, highly functional surfactants are critical to promoting a desired cell response. This library contained surfactants constructed from 20 molecularly distinct (meth)acrylic monomers, which had been pre-identified by HT screening to exhibit specific, varied, and desirable bacterial biofilm inhibitory responses. The surfactant's self-assembly properties in water were assessed by developing a novel, fully automated, HT method to determine the critical aggregation concentration. These values were used as the input data to a computational-based evaluation of the key molecular descriptors that dictated aggregation behavior. Thus, this combination of HT techniques facilitated the rapid design, generation, and evaluation of further novel, highly functional, cell-instructive surfaces by application of designed surfactants possessing complex molecular architectures.

Interfacial self-assembled behavior of pH/light-responsive host-guest alginate-based supra-amphiphiles for controlling emulsifying property

Soft emulsifiers with relatively suitable structural controllability are necessarily required for the preparation of multifunctional Pickering emulsions. Herein, a β-cyclodextrin-grafted alginate/azobenzene-functionalized dodecyl (Alg-β-CD/AzoC. 12) polymeric supra-amphiphile was designed based on the host-guest interfacial self-assembly. As compared with Alg-β-CD amphiphilic polymers, the interfacial tension of Alg-β-CD/AzoC12 supra-amphiphilic assemblies reduced from 29.57 mN/m to 0.18 mN/m, indicating the great amphiphilicity derived from Alg-β-CD/AzoC12 supra-amphiphilic assemblies. With the increase of pH, the interfacial microstructures transformed from flocculated structures, spherical structures into deformed structures. Especially, the spherical microstructures with the highest interfacial viscoelasticity and thickness demonstrated the highest emulsifying efficiency due to the steric hindrance mechanism. Moreover, the interfacial elastic modulus of adsorbed layers exhibited ~4 times of that upon the ultraviolet illumination. These results disclosed that the interfacial microstructures could be readily regulated by the tunable amphiphilicity of Alg-β-CD/AzoC12 assemblies, which would be useful for the applications of Pickering emulsions in numerous fields.

Substituent Effects Provide Access to Tetrasubstituted Ring-Opening Olefin Metathesis of Bicyclo[4.2.0]oct-6-enes

Herein, we report the origin of unexpected reactivity of bicyclo[4.2.0]oct-6-ene substrates containing an α,β-unsaturated amide moiety in ruthenium-catalyzed alternating ring-opening metathesis polymerization reactions. Specifically, compared with control substrates bearing an ester, alkyl ketone, nitrile, or tertiary amide substituent, α,β-unsaturated substrates with a weakly acidic proton showed increased rates of ring-opening metathesis mediated by Grubbs-type ruthenium catalysts. ¹H NMR and IR spectral analyses indicated that deprotonation of the α,β-unsaturated amide substrates resulted in stronger coordination of the carbonyl group to the ruthenium metal center. Principal component analysis identified ring strain and the electron density on the carbonyl oxygen (based on structures optimized by means of ωB97X-D/6311+G(2df,2p) calculations) as the two key contributors to fast ring-opening metathesis of the bicyclo[4.2.0]oct-6-enes; whereas the dipole moment, conjugation, and energy of the highest occupied molecular orbital had little to no effect on the reaction rate. We conclude that alternating ring-opening metathesis polymerization reactions of bicyclo[4.2.0]oct-6-enes with unstrained cycloalkenes require an ionizable proton for efficient generation of alternating polymers.

EFFECT OF EMULSION SBR PREPARED BY ASYMMETRIC REVERSIBLE ADDITION-FRAGMENTATION TRANSFER AGENT ON PROPERTIES OF SILICA-FILLED COMPOUNDS

The development of ultra-high-performance tires that satisfy fuel efficiency, traction, handling performance, and abrasion resistance has gained significant importance in the tire industry. Solution SBR has been used as a raw material, owing to its useful characteristics (e.g., narrow dispersity controllable microstructure and chain-end functionalization). In a recent improvement, emulsion SBR (ESBR), a high-molecular-weight compound with narrow dispersity, has been reported for application in the tire tread compounds. In particular, S,S-dibenzyl trithiocarbonate (DBTC) reversible addition-fragmentation transfer (RAFT) ESBR has exhibited excellent abrasion resistance and fuel efficiency in unfilled and carbon black–filled vulcanizates. However, owing to the symmetrical structure of DBTC RAFT ESBR, the polymer chain was shortened by the reaction of a silane coupling agent with trithiocarbonate, leading to poor abrasion resistance and fuel efficiency in the case of silica-filled vulcanizates. In this study, benzyl (4-methoxyphenyl) trithiocarbonate (BMPTC), an asymmetric RAFT agent that promotes unilateral polymer growth, was synthesized and used in the polymerization of BMPTC RAFT ESBR. Chain cleavage was not observed. Upon application to silica-filled vulcanizates, BMPTC RAFT ESBR exhibited improved abrasion resistance (by 9%), improved fuel efficiency (by 20%), and improved wet traction performance (by 10%) compared with the DBTC RAFT ESBR.

Type I Photoinitiator-Functionalized Block Copolymer Nanoparticles Prepared by RAFT-Mediated Polymerization-Induced Self-Assembly

Type I photoinitiators have been widely used in UV-vis curing technology for the fabrication of functional polymer materials such as coatings, inks, and adhesives. To overcome the drawbacks of using small molecular type I photoinitiators and expand the potential applications of UV-vis curing technology, attaching type I photoinitiators onto the surface of polymer colloids is an attractive strategy. Here we report a robust strategy for the efficient preparation of type I photoinitiator-functionalized block copolymer nanoparticles with various morphologies via aqueous reversible addition-fragmentation chain transfer (RAFT)-mediated polymerization-induced self-assembly (PISA), in which the photoinitiating ability of the type I photoinitiator end group provides a landscape for further functionalization. These block copolymer nanoparticles could also be used as heterogeneous photoinitiators to generate hydrogels with nanoparticles embedded inside. Significantly, the properties and functionalities of these hydrogels could be further controlled by using different block copolymer nanoparticles. This study provides a robust strategy toward the preparation of type I photoinitiator-functionalized block copolymer nanoparticles with the capacity to be modified with varying functionalities.

Achieving molecular weight distribution shape control and broad dispersities using RAFT polymerizations

Metered additions of chain transfer agents are used to control molecular weight distribution (MWD) features in reversible addition-fragmentation chain-transfer polymerizations, giving polymers with tailored MWD shapes and dispersities as high as 6.2.

Facile topological transformation of ABA triblock copolymers into multisite, single-chain-folding and branched multiblock copolymers via sequential click coupling and anthracene chemistry

Telechelic PtBA-b-PSt-b-PtBA copolymers were designed to achieve on-demand topological transformation into multisite, single-chain-folding and branched multiblock copolymers via click/click-like reactions.

High-throughput preparation of radioprotective polymers via Hantzsch's reaction for in vivo X-ray damage determination

Radioprotectors for acute injuries caused by large doses of ionizing radiation are vital to national security, public health and future development of humankind. Here, we develop a strategy to explore safe and efficient radioprotectors by combining Hantzsch's reaction, high-throughput methods and polymer chemistry. A water-soluble polymer with low-cytotoxicity and an excellent anti-radiation capability has been achieved. In in vivo experiments, this polymer is even better than amifostine, which is the only approved radioprotector for clinical applications, in effectively protecting zebrafish embryos from fatally large doses of ionizing radiation (80 Gy X-ray). A mechanistic study also reveals that the radioprotective ability of this polymer originates from its ability to efficiently prevent DNA damage due to high doses of radiation. This is an initial attempt to explore polymer radioprotectors via a multi-component reaction. It allows exploiting functional polymers and provides the underlying insights to guide the design of radioprotective polymers.

Automatic peak assignment and visualisation of copolymer mass spectrometry data using the 'genetic algorithm'

Copolymer analysis is vitally important as the materials have a wide variety of applications due to their tunable properties. Processing mass spectrometry data for copolymer samples can be very complex due to the increase in the number of species when the polymer chains are formed by two or more monomeric units. In this paper, we describe the use of the genetic algorithm for automated peak assignment of copolymers synthesised by a variety of polymerisation methods. We find that in using this method we are able to easily assign copolymer spectra in a few minutes and visualise them into heat maps. These heat maps allow us to look qualitatively at the distribution of the chains, by showing how they alter with different polymerisation techniques, and by changing the initial copolymer composition. This methodology is simple to use and requires little user input, which makes it well suited for use by less expert users. The data outputted by the automatic assignment may also allow for more complex data processing in the future.

Sequence-Controlled Synthesis of Advanced Clickable Synthetic Oligonucleotides

Through thiol-ene photopolymerization of presynthesized oligomers, advanced clickable nucleic acids (CNA-2G) are synthesized with sequence-controlled repeating units. As examples, poly(thymine-adenine) (polyTA) CNA-2G and poly(thymine-thymine-cytosine) CNA-2G are synthesized by polymerizing thiol-ene heterofunctional dimers with pendant thymine-adenine nucleobases and trimer with pendant thymine-thymine-cytosine nucleobases. Based on size exclusion chromatography (SEC) analysis, polyTA and polyTTC have number average molecular weights of 2000 and 1800, respectively, which contain 7-8 pendant nucleobases. Based on the different behavior of the CNA-2G monomers and CNA-2G oligomers with two or more pendant nucleobases in photopolymerization, an unusual thiol-ene chain-growth propagation mechanism is observed for the former and a common thiol-ene step-growth propagation mechanism for the latter. The uncommon thiol-ene chain-growth propagation is hypothesized to rely on a six-membered ring mediated intramolecular hydrogen atom transfer process.

Rapid and Scalable Access to Sequence-Controlled DHDM Multiblock Copolymers by FLP Polymerization

An immortal N-(diphenylphosphanyl)-1,3-diisopropyl-4,5-dimethyl-1,3-dihydro-2H-imidazol-2-imine/diisobutyl (2,6-di-tert-butyl-4-methylphenoxy) aluminum (P(NIⁱ Pr)Ph₂ /(BHT)Alⁱ Bu₂ )-based frustrated Lewis pair (FLP) polymerization strategy is presented for rapid and scalable synthesis of the sequence-controlled multiblock copolymers at room temperature. Without addition of extra initiator or catalyst and complex synthetic procedure, this method enabled a tripentacontablock copolymer (n=53, k=4, dp_n =50) to be achieved with the highest reported block number (n=53) and molecular weight (M_n =310 kg mol^-1 ) within 30 min. More importantly, this FLP polymerization strategy provided access to the multiblock copolymers with tailored properties by precisely adjusting the monomer sequence and block numbers.

Effect of Reversible Addition-Fragmentation Transfer Emulsion Styrene Butadiene Rubber (RAFT ESBR) on the Properties of Carbon Black-Filled Compounds

Tread is an important component that directly affects the performance of passenger car radial (PCR) tires. Styrene-butadiene rubber (SBR) is mainly used for tire tread and it includes solution styrene-butadiene rubber (SSBR) and emulsion styrene-butadiene rubber (ESBR). Although SSBR is mainly used, the manufacturing process for SSBR is more challenging than ESBR, which is environmentally friendly, but has the disadvantage of a broad molecular weight distribution. To overcome this, a reversible addition-fragmentation radical transfer (RAFT) polymerization technique is used in ESBR polymerization. An environmentally friendly RAFT ESBR with a narrow dispersity can be polymerized. Here, carbon black-filled compounds were manufactured while using RAFT ESBR, and their properties were compared to ESBR. The analysis showed a low crosslink density of RAFT ESBR, due to the high polysulfide crosslink structure. We manufactured a carbon black-filled compound with the same crosslink density and structure as the ESBR carbon black-filled compound, and the effect of the dispersity of the base polymer was investigated. RAFT ESBR showed 9% better abrasion resistance and 29% better fuel efficiency than ESBR, according to the analysis of the data. The narrow dispersity can reduce energy loss and positively influence the abrasion resistance and fuel efficiency.

Multicolor Polymeric Nanoparticle Neuronal Tracers

Deciphering the targets of axonal projections plays a pivotal role in interpreting neuronal function and pathology. Neuronal tracers are indispensable tools for uncovering the functions and interactions between different subregions of the brain. However, the selection of commercially available neuronal tracers is limited, currently comprising small molecule dyes, viruses, and a handful of synthetic nanoparticles. Here, we describe a series of polymer-based nanoparticles capable of retrograde transport along neurons in vivo in mice. These polymeric nanoparticle neuronal tracers (NNTs) are prepared with a palette of fluorescent labels. The morphologies, charges, and optical properties of NNTs are characterized by analytical methods including fluorescence microscopy, electron microscopy, and dynamic light scattering. Cytotoxicity and cellular uptake were investigated to analyze cellular interactions in vitro. Regardless of the type of fluorophore used in labeling, each tracer was of similar morphology, size, and charge and was competent for retrograde transport in vivo. The platform provides a convenient, scalable synthetic approach for nonviral tracers labeled with a range of fluorophores for in vivo neuronal projection mapping.

Iron-Catalysed Radical Polymerisation by Living Bacteria

The ability to harness cellular redox processes for abiotic synthesis might allow the preparation of engineered hybrid living systems. Towards this goal we describe a new bacteria-mediated iron-catalysed reversible deactivation radical polymerisation (RDRP), with a range of metal-chelating agents and monomers that can be used under ambient conditions with a bacterial redox initiation step to generate polymers. Cupriavidus metallidurans, Escherichia coli, and Clostridium sporogenes species were chosen for their redox enzyme systems and evaluated for their ability to induce polymer formation. Parameters including cell and catalyst concentration, initiator species, and monomer type were investigated. Water-soluble synthetic polymers were produced in the presence of the bacteria with full preservation of cell viability. This method provides a means by which bacterial redox systems can be exploited to generate "unnatural" polymers in the presence of "host" cells, thus setting up the possibility of making natural-synthetic hybrid structures and conjugates.

High-Throughput Preparation of Antibacterial Polymers from Natural Product Derivatives via the Hantzsch Reaction

The Hantzsch and free-radical polymerization reactions were combined in a one-pot high-throughput (HTP) system to simultaneously prepare 30 unique polymers in parallel. Six aldehydes derived from natural products were used as the starting materials to rapidly prepare the library of 30 poly(1,4-dihydropyridines). From this library, HTP evaluation methods led to the identification of an antibacterial polymer. Mechanistic studies revealed that the dihydropyridine group in the polymer side-chain structure plays an important role in resisting bacterial attachment to the polymer surface, thus leading to the antibacterial function of this polymer. This research demonstrates the value of multicomponent reactions (MCRs) in interdisciplinary fields by discovering functional polymers for possible practical applications. It also provides insights to further developing new functional polymers using MCRs and HTP methods with important implications in organic chemistry, polymer chemistry, and materials science.

Precisely Synthesized Sequence-Controlled Amino Acid-Derived Vinyl Polymers: New Insights into Thermo-Responsive Polymer Design

Thermo-responsive block copolymers are of great interest in biomedical and nanotechnological fields. These polymers achieve a versatile and complex responsiveness through a sophisticated and intricate combination of different thermo-responsive blocks. While their utility is clear, the fundamental design principles of such vinyl polymers are not yet thoroughly understood. Herein, a precise synthesis of sequence-controlled amino-acid-derived vinyl polymers and their unique thermal response in water are reported. Seven distinct block (random) copolymers that contain two kinds of amino acid blocks (poly(N-acryloyl alanine(A)- or glycine(G)-methyl ester)) with the same total chain length (degree of polymerization [DP] ≈30) and chemical composition (A/G ≈1), but with systematic variations in the block sequence and length, with an accuracy target of DP ± 1, are prepared. By specifying the primary structure, the thermal responses including transition temperature, thermo-sensitivity, and microenvironment in the dehydrated state can be finely tuned. These findings offer new directions in the design of structurally and functionally diverse thermo-responsive vinyl polymers.

Synthetic approaches for multiblock copolymers

Multiblock copolymers (MBCs) are an emerging class of synthetic polymers that exhibit different macromolecular architectures and behaviours to those of homopolymers or di/triblock copolymers.

Elucidating the effect of sequence and degree of polymerization on antimicrobial properties for block copolymers

Sequence-controlled copolymers have recently attracted great interest in a variety of applications, including antimicrobial materials.

Synthesis of multisegmented block copolymer by Friedel–Crafts hydroxyalkylation polymerization

Friedel–Crafts (FC) polycondensation of 1,4-dimethoxybenzene with 4-substituted benzaldehyde species was used to prepare telechelic oligomers and high-molar-mass multisegmented block copolymers.

Sequence regulation in living anionic terpolymerization of styrene and two categories of 1,1-diphenylethylene (DPE) derivatives

In living anionic polymerization, gradient, block and random sequences of two categories of DPE derivatives were easily generated by implementing different feed strategies and screening the DPE derivative pairs with different reactivities.