A new method to position and functionalize metal-organic framework crystals

Universal Porphyrinic Metal-Organic Framework Coating to Various Nanostructures for Functional Integration

A universal strategy was reported that enables functional group-capped nanostructures with various morphologies and compositions to be coated by porphyrin metal-organic framework (MOF). Based on the nanostructure-induced heterogeneous nucleation, the controlled growth of MOF shell on the surface of nanostructures can be realized. It was demonstrated that this modification strategy can realize controlled growth of porphyrin MOF on a series of organic and inorganic nanostructures, such as polydopamine (PDA) nanoparticles, PDA@Pt nanoparticles, graphene oxide sheets, and Au nanorods. The as-prepared composites exhibit excellent catalytic and optical properties that originate from the nanostructure as well as the coated porphyrin MOF. We further explored the potential applications of PDA@MOF and PDA@Pt@MOF in nanomedicine and photocatalysis.

Tailoring the nanoscale morphology of HKUST-1 thin films via codeposition and seeded growth

Integration of surface-anchored metal-organic frameworks (surMOFs) within hierarchical architectures is necessary for potential sensing, electronic, optical, or separation applications. It is important to understand the fundamentals of film formation for these surMOFs in order to develop strategies for their incorporation with nanoscale control over lateral and vertical dimensions. This research identified processing parameters to control the film morphology for surMOFs of HKUST-1 fabricated by codeposition and seeded deposition. Time and temperature were investigated to observe film formation, to control film thickness, and to tune morphology. Film thickness was investigated by ellipsometry, while film structure and film roughness were characterized by atomic force microscopy. Films formed via codeposition resulted in nanocrystallites anchored to the gold substrate. A dynamic process at the interface was observed with a low density of large particulates (above 100 nm) initially forming on the substrate; and over time these particulates were slowly replaced by the prevalence of smaller crystallites (ca. 10 nm) covering the substrate at a high density. Elevated temperature was found to expedite the growth process to obtain the full range of surface morphologies with reasonable processing times. Seed crystals formed by the codeposition method were stable and nucleated growth throughout a subsequent layer-by-layer deposition process. These seed crystals templated the final film structure and tailor the features in lateral and vertical directions. Using codeposition and seeded growth, different surface morphologies with controllable nanoscale dimensions can be designed and fabricated for integration of MOF systems directly into device architectures and sensor platforms.

Preparation of Mesoporous Basic Oxides through Assembly of Monodispersed Mg-Al Layered Double Hydroxide Nanoparticles

Mesoporous basic Mg-Al mixed metal oxides (MMOs) with a high surface area and large pore size have been prepared through the assembly of monodispersed layered double hydroxide nanoparticles (LDHNPs) with block copolymer templates. The particle sizes of the LDHNPs were mainly controlled by varying the concentration of tris(hydroxymethyl)aminomethane (THAM), which was used as a surface stabilizing agent. LDHNPs and micelles of a block copolymer (Pluronic F127) were assembled to form a composite. The composites were calcined to transform them into mesoporous MMOs and to remove the templates. The Brunauer-Emmett-Teller surface areas, mesopore sizes, and pore volumes increased as a result of using the templates. Moreover, the pore sizes of the mesoporous MMOs could be controlled by using LDHNPs of different sizes. The mesoporous MMOs prepared from the LDHNPs showed much higher catalytic activity than a conventional MMO catalyst for the Knövenagel condensation of ethyl cyanoacetate with benzaldehyde. The mesoporous MMO catalyst prepared using the smallest LDHNPs, about 12 nm in size, showed the highest activity. Therefore, the use of monodispersed LDHNPs and templates is effective for preparing highly active mesoporous solid base catalysts.

Co-metal-organic-frameworks with pure uniform crystal morphology prepared via Co2+ exchange-mediated transformation from Zn-metallogels for luminol catalysed chemiluminescence

Cation exchange-mediated transformation from Zn-metallogels (MOGs), which was a mild facile strategy relative to the demanding hydrothermal method, was employed to develop Co²⁺ metal-organic frameworks (Co-MOFs) at room temperature. The obtained Co-MOFs was of uniform octahedral morphology and possessed high activity to catalyze luminol chemiluminescence without extra oxidants. By adding cysteine, the CL emission of luminol-Co-MOFs system was further enhanced. Based on this phenomenon, Co-MOFs was utilized to build a practical sensing platform for cysteine determination. Under the optimized conditions, the relative CL intensity (ΔI) was proportional to the concentration of cysteine in the range of 2-10μM, and the detection limit was 0.49μM (3S/N). Moreover, the established method was applied to the determination of cysteine in commercially available pharmaceutical injections.

Controllable design of tunable nanostructures inside metal–organic frameworks

This review focuses on recent progress in the design of tunable nanoentities encapsulated by metal–organic frameworks (MOFs), with special emphasis on the preparation and synergistic properties of such composites.

Fe3O4@HKUST-1 and Pd/Fe3O4@HKUST-1 as magnetically recyclable catalysts prepared via conversion from a Cu-based ceramic

A Fe₃O₄/Cu- ceramic system converted into a magnetic HKUST-1 composite was used as a recyclable catalyst for one-pot cascade and hydrogenation reactions.

An updated roadmap for the integration of metal–organic frameworks with electronic devices and chemical sensors

This review highlights the steps needed to bring the properties of MOFs from the chemical lab to the microelectronics fab.

Spiers Memorial Lecture: : Progress and prospects of reticular chemistry

Reticular chemistry, the linking of molecular building units by strong bonds to make crystalline, extended structures such as metal–organic frameworks (MOFs), zeolitic imidazolate frameworks (ZIFs), and covalent organic frameworks (COFs), is currently one of the most rapidly expanding fields of science. In this contribution, we outline the origins of the field; the key intellectual and practical contributions, which have led to this expansion; and the new directions reticular chemistry is taking that are changing the way we think about making new materials and the manner with which we incorporate chemical information within structures to reach additional levels of functionality. This progress is described in the larger context of chemistry and unexplored, yet important, aspects of this field are presented.

Surface-supported metal–organic framework thin films: fabrication methods, applications, and challenges

Surface-supported metal–organic framework thin films are receiving increasing attention as a novel form of nanotechnology, which hold great promise for photovoltaics, electronic devices, CO₂ reduction, energy storage, water splitting and membranes.

Direct in Situ Conversion of Metals into Metal-Organic Frameworks: A Strategy for the Rapid Growth of MOF Films on Metal Substrates

The fabrication of metal-organic framework (MOF) films on conducting substrates has demonstrated great potential in applications such as electronic conduction and sensing. For these applications, direct contact of the film to the conducting substrate without a self-assembled monolayer (SAM) is a desired step that must be achieved prior to the use of MOF films. In this report, we propose an in situ strategy for the rapid one-step conversion of Cu metal into HKUST-1 films on conducting Cu substrates. The Cu substrate acts both as a conducting substrate and a source of Cu²⁺ ions during the synthesis of HKUST-1. This synthesis is possible because of the simultaneous reaction of an oxidizing agent and a deprotonating agent, in which the former agent dissolves the metal substrate to form Cu²⁺ ions while the latter agent deprotonates the ligand. Using this strategy, the HKUST-1 film could not only be rapidly synthesized within 5 min but also be directly attached to the Cu substrate. Based on microscopic studies, we propose a plausible mechanism for the growth reaction. Furthermore, we show the versatility of this in situ conversion methodology, applying it to ZIF-8, which comprises Zn²⁺ ions and imidazole-based ligands. Using an I₂-filled HKUST-1 film, we further demonstrate that the direct contact of the MOF film to the conducting substrate makes the material more suitable for use as a sensor or electronic conductor.

Facile synthesis of Fe3O4/g-C3N4/HKUST-1 composites as a novel biosensor platform for ochratoxin A

A fluorescent biosensor for ochratoxin A was fabricated on the basis of a new nanocomposite (Fe₃O₄/g-C₃N₄/HKUST-1 composites). Fe₃O₄/g-C₃N₄/HKUST-1 was synthesized in this work for the first time, which combined HKUST-1 with g-C₃N₄ to improve its chemical stability. Fe₃O₄/g-C₃N₄/HKUST-1 composites have strong adsorption capacity for dye-labeled aptamer and are able to completely quench the fluorescence of the dye through the photoinduced electron transfer (PET) mechanism. In the presence of ochratoxin A (OTA), it can bind with the aptamer with high affinity, causing the releasing of the dye-labeled aptamer from the Fe₃O₄/g-C₃N₄/HKUST-1 and therefore results in the recovery of fluorescence. The fluorescence intensity of the biosensor has a linear relationship with the OTA concentration in the range of 5.0-160.0ng/mL. The LOD of sensor is 2.57ng/mL (S/N=3). This fluorescence sensor based on the Fe₃O₄/g-C₃N₄/HKUST-1 composites has been applied to detect OTA in corn with satisfying results.

Fe-MIL-101 exhibits selective cytotoxicity and inhibition of angiogenesis in ovarian cancer cells via downregulation of MMP

Though metal-organic frameworks (MOFs) have inspired potential applications in biomedicine, cytotoxicity studies of MOFs have been relatively rare. Here we demonstrate for the first time that an easily available MOF, Fe-MIL-101, possesses intrinsic activity against human SKOV3 ovarian cancer cells and suppress the proliferation of SKOV3 cells (IC50 = 23.6 μg mL(-1)) and normal mouse embryonic fibroblasts (BABL-3T3, IC50 = 78.3 μg mL(-1)) cells. It was more effective against SKOV3 cells than typical anticancer drugs such as artesunate (ART, IC50 = 96.9 μg mL(-1)) and oxaliplatin (OXA, IC50 = 64.4 μg mL(-1)), but had less effect on normal BABL-3T3 cells compared with ART (IC50 = 36.6 μg mL(-1)) and OXA (IC50 = 13.8 μg mL(-1)). Fe-MIL-101 induced apoptosis of human umbilical vein endothelial cells (HUVECs) via G0/G1 cell cycle arrest and decreased the mitochondrial membrane potential in HUVECs and induced apoptosis. Furthermore, Fe-MIL-101 exhibited stronger antiangiogenic effects in HUVEC cells than antiangiogenic inhibitor (SU5416) via downregulation the expression of MMP-2/9. Our results reveal a new role of Fe-MIL-101 as a novel, non-toxic anti-angiogenic agent that restricted ovarian tumour growth. These findings could open a new avenue of using MOFs as potential therapeutics in angiogenesis-dependent diseases, including ovarian cancer.

The Road to MOF-Related Functional Materials and Beyond: Desire, Design, Decoration, and Development

Metal-organic frameworks (MOFs), which are known as a class of porous coordination polymers, have proven to be of great significance to manifold applications, owing to their fascinating topology, ultrahigh porosity, enormous internal surface area, and the combination of being as rigid as inorganic materials and as flexible as organic materials . In this review, we give a concise history of the development of MOFs as functional materials prior to our entry into this area in 2006, then a summary of our road to participate in and extend the outline of the research in MOFs chemistry, as well as the challenge in further designing applicable functional materials. We describe not only the road of evolution from the past, present, and future of this chemistry, but also the road to finalize a functional material from the desire to the design, synthesis, and postmodification of a MOF. Throughout the review, we particularly emphasize the improvements in the application of MOFs as heterogeneous catalysts, such as employing MOFs as one component for the construction of composites, and their extended scope in tough catalytic reactions. Examples of applications in gas storage and separation, small molecular sensing, and our perspectives for future applications triggered by MOFs, are also introduced.

An unprecedented single platform via cross-linking of zeolite and MOFs

The unprecedented ternary nanocomposites have been synthesized as a single platform via cross-linking of two nanoporous materials, MOFs and Pt nanoparticle (NP) loaded zeolite.

N-GQDs and Eu3+ co-encapsulated anionic MOFs: two-dimensional luminescent platform for decoding benzene homologues

N-GQDs and Eu³⁺ co-encapsulated Mg-MOFs were prepared, and the ratio of I_L/I_Eu and I_Eu/I_N-GQDs was decoded on a 2D map for the recognition of benzene homologues.

Selective CO2 uptake and vapor adsorption study within Sn(iv) porphyrin crystals

The supramolecular porphyrin networks described show exceptional skeleton robustness as examined by N₂, CH₄, CO₂ sorption studies and solvent vapour uptake. The pore size as well as surface properties of the channels can be successfully tuned by modification of the discrete porphyrin diphenolate molecules.

Platinum nanoparticles encapsulated metal–organic frameworks for the electrochemical detection of telomerase activity

A one-pot strategy was developed for the preparation of platinum nanoparticle encapsulated metal–organic frameworks as an electrocatalytic tracer for sensing telomerase activity.

Hybrid materials of Ni NP@MOF prepared by a simple synthetic method

We demonstrate a novel, simple synthetic method for metal (Ni) NPs in a MOF using the partial thermal decomposition of nickel(II) 2,5-dihydroxyterephthalate (Ni-MOF-74). The Ni NPs inside the Ni-MOF-74 are several nanometers in size, and the size can be precisely controlled by the heating conditions.

Liquid-phase step-by-step growth of an iron cyanide coordination framework on LiCoO₂ particle surfaces

Surface modification of inorganic objects with metal-organic frameworks (MOFs) - organic-inorganic hybrid framework materials with infinite networks - opens wide windows for potential applications. In order to derive a target property, the key is the ability to fine tune the degree of modification. Solution-based step-by-step growth techniques provide excellent control of layer thickness which can be varied with the number of deposition cycles. Such techniques with MOFs have been mainly applied to flat substrates, but not to particle surfaces before. Here, we present the facile surface modification of inorganic particles with a framework compound under operationally simple ambient conditions. A solution-based sequential technique involving the alternate immersion of LiCoO2 (LCO) - a positive electrode material for a lithium ion battery - into FeCl2·4H2O and K3[Fe(CN)6] solutions results in the formation of Prussian blue (PB) nanolayers on the surface of the LCO particles (PBNL@LCO). The PB growth is finely controlled by the number of immersion cycles. An electrochemical cell with PBNL@LCO as a positive electrode material exhibits a discharge capacity close to the specific capacity of LCO. The results open a new direction for creating suitable interfacial conditions between electrode materials and electrolytes in secondary battery materials.

Biomimetic mineralization of metal-organic frameworks as protective coatings for biomacromolecules

Enhancing the robustness of functional biomacromolecules is a critical challenge in biotechnology, which if addressed would enhance their use in pharmaceuticals, chemical processing and biostorage. Here we report a novel method, inspired by natural biomineralization processes, which provides unprecedented protection of biomacromolecules by encapsulating them within a class of porous materials termed metal-organic frameworks. We show that proteins, enzymes and DNA rapidly induce the formation of protective metal-organic framework coatings under physiological conditions by concentrating the framework building blocks and facilitating crystallization around the biomacromolecules. The resulting biocomposite is stable under conditions that would normally decompose many biological macromolecules. For example, urease and horseradish peroxidase protected within a metal-organic framework shell are found to retain bioactivity after being treated at 80 °C and boiled in dimethylformamide (153 °C), respectively. This rapid, low-cost biomimetic mineralization process gives rise to new possibilities for the exploitation of biomacromolecules.

Structuring of metal-organic frameworks at the mesoscopic/macroscopic scale

The assembly of metal ions with organic ligands through the formation of coordination bonds gives crystalline framework materials, known as metal-organic frameworks (MOFs), which recently emerged as a new class of porous materials. Besides the structural designability of MOFs at the molecular length scale, the researchers in this field very recently made important advances in creating more complex architectures at the mesoscopic/macroscopic scale, in which MOF nanocrystals are used as building units to construct higher-order superstructures. The structuring of MOFs in such a hierarchical order certainly opens a new opportunity to improve the material performance via design of the physical form rather than altering the chemical component. This review highlights these superstructures and their applications by categorizing them into four dimensionalities, zero-dimensional (0D), one-dimensional (1D), two-dimensional (2D), and three-dimensional (3D) superstructures. Because the key issue for structuring of MOFs is to spatially control the nucleation process in desired locations, this review conceptually categorizes the available synthetic methodologies from the viewpoint of the reaction system.

A facile in situ self-assembly strategy for large-scale fabrication of CHS@MOF yolk/shell structure and its catalytic application in a flow system

A hierarchical yolk/shell copper hydroxysulfates@MOF (CHS@MOF, where MOF = metal-organic frameworks) structure was fabricated from a homogeneous yolk/shell CHS template composed of an active shell and a stabilized core via a facile self-template strategy at room temperature. The active shell of the template served as the source of metal ion and was in situ transformed into a well-defined MOF crystal shell, and the relatively stabilized core retained its own nature during the formation of the MOF shell. The strategy of in situ transformation of CHS shell to MOF shell avoided the self-nucleation of MOF in the solution and complex multistep procedures. Furthermore, a flow reaction system using CHS@MOF as self-supported stationary-phase catalyst was developed, which demonstrated excellent catalytic performance for aldehyde acetalization with ethanol, and high yields and selectivities were achieved under mild conditions.

Universal strategy for homogeneously doping noble metals into cyano-bridged coordination polymers

Coordination polymers with large surface areas and uniform but tunable cavities have attracted extensive attention because of their unique properties and potential applications in numerous fields. The introduction of noble metal into coordination polymers, which may enhance or display new behaviors beyond their parent counterparts, presents great challenges in maintaining the fragile coordination structures and meeting the compatibility. Here, cyano-bridged coordination polymers are robust and show very nice compatibilities with a series of noble metals, such as Pd, Pt, Au, Ag. Those noble elements partially take the place of the transition metal ions under room temperature (for Au and Ag) or a mild hydrothermal environment (for Pd and Pt) without damaging the framework. By using this universal simple synthetic procedure, we prepared a series of noble metal containing metal hexacyanoferrate (MHCF) with various morphologies and structures, including Pd/Pt/Ag/Au-MnHCF, Pd/Pt/Ag/Au-CoHCF, and Pd/Pt/Ag/Au-NiHCF. Among them, Pd-MnHCF demonstrates the control of morphologies by adjusting operational details, and notably, it shows very unique, enhanced catalytic performance, reflecting the superiority of cyano-connected positive-valent Pd as a single-atom catalyst.

Photofunctional nanocomposites based on the functionalization of metal–organic frameworks by up/down conversion luminescent nanophosphors

A novel strategy is demonstrated to construct photofunctional nanocomposites by composing surfactant-capped nanophosphors and a zeolitic imidazolate framework (ZIF-8) unit. These nanocomposites show tunable luminescence performance for different photoactive units under different excitation. These provide useful data for potential applications in optical devices.

Structure refinement and photocatalytic properties of porous POMCPs by selecting the isomerous PYTTZ

Two POMCPs with similar building units and different motifs of tunnels were reported.

Highly efficient colorimetric detection of cancer cells utilizing Fe-MIL-101 with intrinsic peroxidase-like catalytic activity over a broad pH range

We take advantage of the folic acid conjugated iron-based metal–organic frameworks (Fe-MIL-101) without any surface modification to design a simple and sensitive colorimetric assay to detect cancer cells based on its intrinsic peroxidase-like activity over broad pH range.

Positioning of the HKUST-1 metal–organic framework (Cu3(BTC)2) through conversion from insoluble Cu-based precursors

A Cu-based metal–organic framework (HKUST-1) was synthesized from insoluble precursors and positioned using sol–gel based coatings.

General incorporation of diverse components inside metal-organic framework thin films at room temperature

Porous metal-organic frameworks (MOFs) demonstrate great potential for numerous applications. Although hetero-functional components have been encapsulated within MOF crystalline particles, the uniform incorporation of functional species with different sizes, shapes and functions in MOF thin films with dual properties, especially at room temperature and without the degradation of the MOF framework, remains a significant challenge towards further enriching their functions for various purposes. Here we report a general method that can rapidly encapsulate diverse functional components, including small ions, micrometre-sized particles, inorganic nanoparticles and bioactive proteins, in MOF thin films at room temperature via a metal-hydroxide-nanostrand-assisted confinement technique. These functional component-encapsulated MOF composite thin films exhibit synergistic and size-selective catalytic, bio-electrochemical, conductive and flexible functionalities that are desirable for thin film devices, including catalytic membrane reactors, biosensors and flexible electronic devices.

Hybrid crystals comprising metal-organic frameworks and functional particles: synthesis and applications

Hybrid crystals containing encapsulated functional species exhibit promising novel physical and chemical properties. The realization of many properties critically depends on the selection of suitable functional species for incorporation, the rational control of the crystallinity of the host materials, and the manipulation of the distribution of the encapsulated species; only a few hybrid crystals achieve this. Here, a novel synthetic method enables the encapsulation of functional species within crystalline metal-organic frameworks (MOFs). Various kinds of single-crystalline MOFs with incorporated particles are presented. The encapsulated particles can be distributed in a controllable manner, and the hybrid crystals are applied to the heterogeneous catalysis of the reduction of nitroarenes. These findings suggest a general approach for the construction of MOF materials with potential applications; by combining species and MOFs with suitable functionalities, new properties--not possible by other means--may arise.

MOFzyme: Intrinsic protease-like activity of Cu-MOF

The construction of efficient enzyme mimetics for the hydrolysis of peptide bonds in proteins is challenging due to the high stability of peptide bonds and the importance of proteases in biology and industry. Metal-organic frameworks (MOFs) consisting of infinite crystalline lattices with metal clusters and organic linkers may provide opportunities for protease mimic which has remained unknown. Herein, we report that Cu₂(C₉H₃O₆)_4/3 MOF (which is well known as HKUST-1 and denoted as Cu-MOF here), possesses an intrinsic enzyme mimicking activity similar to that found in natural trypsin to bovine serum albumin (BSA) and casein. The Michaelis constant (K_m) of Cu-MOF is about 26,000-fold smaller than that of free trypsin indicating a much higher affinity of BSA for Cu-MOF surface. Cu-MOF also exhibited significantly higher catalytic efficiency than homogeneous artificial metalloprotease Cu(II) complexes and could be reused for ten times without losing in its activity. Moreover, Cu-MOF was successfully used to simulate trypsinization in cell culture since it dissociated cells in culture even without EDTA.

Hollow metal-organic framework nanospheres via emulsion-based interfacial synthesis and their application in size-selective catalysis

Metal-organic frameworks (MOFs) represent an emerging class of crystalline materials with well-defined pore structures and hold great potentials in a wide range of important applications. The functionality of MOFs can be further extended by integration with other functional materials, e.g., encapsulating metal nanoparticles, to form hybrid materials with novel properties. In spite of various synthetic approaches that have been developed recently, a facile method to prepare hierarchical hollow MOF nanostructures still remains a challenge. Here we describe a facile emulsion-based interfacial reaction method for the large-scale synthesis of hollow zeolitic imidazolate framework 8 (ZIF-8) nanospheres with controllable shell thickness. We further demonstrate that functional metal nanoparticles such as Pd nanocubes can be encapsulated during the emulsification process and used for heterogeneous catalysis. The inherently porous structure of ZIF-8 shells enables encapsulated catalysts to show size-selective hydrogenation reactions.

Metal nanocrystals embedded in single nanocrystals of MOFs give unusual selectivity as heterogeneous catalysts

The growth of nanocrystalline metal-organic frameworks (nMOFs) around metal nanocrystals (NCs) is useful in controlling the chemistry and metric of metal NCs. In this Letter, we show rare examples of nMOFs grown in monocrystalline form around metal NCs. Specifically, Pt NCs were subjected to reactions yielding Zr(IV) nMOFs [Zr6O4(OH)4(fumarate)6, MOF-801; Zr6O4(OH)4(BDC)6 (BDC = 1,4-benzenedicarboxylate), UiO-66; Zr6O4(OH)4(BPDC)6 (BPDC = 4,4'-biphenyldicarboxylate), UiO-67] as a single crystal within which the Pt NCs are embedded. These constructs (Pt⊂nMOF)nanocrystal are found to be active in gas-phase hydrogenative conversion of methylcyclopentane (MCP) and give unusual product selectivity. The Pt⊂nUiO-66 shows selectivity to C6-cyclic hydrocarbons such as cyclohexane and benzene that takes place with 100 °C lower temperature than the standard reaction (Pt-on-SiO2). We observe a pore size effect in the nMOF series where the small pore of Pt⊂nMOF-801 does not produce the same products, while the larger pore Pt⊂nUiO-67 catalyst provides the same products but with different selectivity. The (Pt⊂nMOF)nanocrystal spent catalyst is found to maintain the original crystallinity, and be recyclable without any byproduct residues.

Biomineralized anisotropic gold microplate-macrophage interactions reveal frustrated phagocytosis-like phenomenon: a novel paclitaxel drug delivery vehicle

This study reports a facile biomineralization route for gold microplates (GMPs) synthesis using bovine serum albumin (BSA) as a reductant and stabilizing agent. Adding BSA to HAuCl4 solution yields spontaneous versatile anisotropic and partially hollow GMPs upon aging. We hypothesize that the instantaneous protein denaturation at low pH enabled access to serine and threonine hydroxyl, and sulfhydryl groups of BSA, which act as a reductant and stabilizer, respectively. This reaction could be hastened by increasing the temperature well beyond 65 °C. Transmission electron microscopy/X-ray diffraction studies revealed highly crystalline and anisotropic structures (triangle, pentagon, and rectangle). Atomic force microscopy/scanning electron microscopy analyses demonstrated unique morphology of microplates with a partially void core and BSA mineralized edge structure. RAW 264.7 mice peritoneal macrophage-microplate interaction studies using live cell confocal imaging reveal that cells are capable of selectively internalizing smaller GMPs. Large GMPs are preferentially picked with sharp vertices but cannot be internalized and exhibit frustrated phagocytosis-like phenomenon. We explored particle phagocytosis as an actin mediated process that recruits phagosome-like acidic organelles, shown by a lysosensor probe technique. The biocompatible GMPs exhibited ∼70% paclitaxel (PCL) loading and sustained release of PCL, showing antitumor activity with the MCF-7 cell line, and could be a novel drug carrier for breast cancer therapy.