Infused-liquid-switchable porous nanofibrous membranes for multiphase liquid separation

Simulation Study on the Dynamic Behaviors of Water-in-Oil Emulsified Droplets on Coalescing Fibers

Although increasing superwetting membranes have been developed for separating oil-water emulsions based on the "size-sieving" mechanism, their pores are easily blocked and fouled by the intercepted emulsified droplets, which would result in a severe membrane fouling issue and a sharp decline in flux. Instead of droplet interception, a fiber-based coalescer separates oil/water emulsions by inducing the emulsified droplets to coalesce and transform into layered oil/water mixtures, exhibiting an ability to work continuously for a long time with high throughput, which makes it a promising technology for emulsion treatment. However, the underlying mechanism of the separation process is not well understood, which makes it difficult to further improve the separation performance. Hence, in this work, the dynamic behaviors of water-in-oil emulsified droplets on the surface of the coalescing fiber were numerically investigated based on the phase-field model. The attachment, transport, and detachment behaviors of droplets on fibers were directly observed, and the effects of fiber wettability, orientation, arrangement, and fluid speed were studied in detail. First, it was observed that the droplets will move downstream along the fiber surface under the effect of fluid shear, and the large droplets tend to coalesce with their downstream small droplets on the same fiber surface because they move faster compared to the small droplets. Second, it was found that the emulsified droplet will spontaneously transport to the intersection of two angled fibers under the drive of asymmetric Laplace pressure, which demonstrated that the emulsified droplets tend to gather at the intersection of fibers when permeating through a coalescing medium. Third, it was found that the detachment behaviors of droplets from the fiber surface are strongly affected by their size, fiber wettability, and fluid velocity. In addition, the results of our simulation show that the backside of two closely attached fibers can further inhibit the detachment of droplets. We truly believe that our research results are of significance to optimize the parameters of a fiber-based coalescer for separating oil-water emulsions and to develop novel oil/water separators.

Molecular-Structure-Induced Under-Liquid Dual Superlyophobic Surfaces

Surfaces with under-water superoleophobicity or under-oil superhydrophobicity have attractive features due to their widespread applications. However, it is difficult to achieve under-liquid dual superlyophobic surfaces, that is, under-oil superhydrophobicity and under-water superoleophobicity coexistence, due to the thermodynamic contradiction. Herein, we report an approach to obtain the under-liquid dual superlyophobic surface through conformational transitions of surface self-assembled molecules. Preferential exposure of either hydrophobic or hydrophilic moieties of the hydroxythiol (HS(CH₂)_nOH, where n is the number of methylene groups) self-assembled monolayers to the surrounding solvent (water or oil) can be used to manipulate macroscopic wettability. In water, the surfaces modified with different hydroxythiols exhibit under-water superoleophobicity because of the exposure of hydroxyl groups. In contrast, surface wettability to water is affected by molecular orientation in oil, and the surface transits from under-oil superhydrophilicity to superhydrophobicity when n ≥ 4. This surface design can amplify the molecular-level conformational transition to the change of macroscopic surface wettability. Furthermore, on-demand oil/water separation relying on the under-liquid dual superlyophobicity is successfully demonstrated. This work may be useful in developing the materials with opposite superwettability.

Underwater Superoleophobic Matrix-Formatted Liquid-Infused Porous Biomembranes for Extremely Efficient Deconstitution of Nanoemulsions

Wettability is one of the most critical interfacial properties of any surface. Surfaces with special wettability such as superwetting or superantiwetting are being intensively explored for their wide-ranging applicability by a biomimetic exploration of unusual wetting phenomena in nature. This study provides a green water-infused superoleophobic composite membrane by boosting bacteria nanocellulose growth on a reinforcement fibrous substrate. It was shown that this versatile antifouling membrane is capable of removing water from surfactant-stabilized oil-in-water micro/nanoemulsions and helps to isolate the oil fraction with very high filtration efficiency. The renewable membrane based on bacteria nanocellulose matrices can vastly improve current technologies by cultivating a naturally occurring soft materials approach with lubricious conformal interfaces to effectively and simply cover suitable surfaces.

Biomimetic Fabrication of Janus Fabric with Asymmetric Wettability for Water Purification and Hydrophobic/Hydrophilic Patterned Surfaces for Fog Harvesting

The long-term shortage of freshwater resources has drawn increasing research attention for water purification and collection. This work reports a facile method to prepare Janus fabrics with asymmetric wettability for on-demand oil/water separation and hydrophobic/hydrophilic patterned fabrics for efficient fog harvesting. Here, the superhydrophobic fabric was prepared by in situ polymerization of polydivinylbenzene (PDVB) on cotton fabric. By regulating the polymerization time, the PDVB polymer content was changed, thereby achieving the regulation of the surface structure and wettability of the prepared fabric. Meanwhile, the superhydrophobic fabric exhibited excellent self-cleaning and antifouling performance, mechanical abrasion and chemical resistance, and environmental durability. Moreover, the photocatalytic degradation properties of PDVB were utilized to prepare the Janus fabric with asymmetric wettability. Water droplets could spontaneously penetrate from the hydrophobic side to the hydrophilic side, while not vice versa, achieving unidirectional transport of water. In addition, the prepared Janus fabric could be used for on-demand oil/water separation, including the heavy oil/water mixture and light oil/water mixture. The separation efficiency and collected oil purity of each mixture were higher than 99.00 and 99.94%, respectively. Furthermore, the hydrophobic/hydrophilic patterned fabrics were prepared by using the lithographic masks with different apertures under UV light irradiation. Based on the fog-capturing ability of the hydrophilic areas and the water transport performance of the hydrophobic regions, efficient fog harvesting was achieved. For the patterned fabric with larger hydrophobic/hydrophilic areas, the water collection rate reached 224.7 mg cm^-2 h^-1. Therefore, this simple strategy to achieve controllable gradient wettability by adjusting the surface structure and chemical composition of the fabric shows great potential in the filtration of purification of oily sewage and the efficient condensed collection of water.

Programming Multiphase Media Superwetting States in the Oil-Water-Air System: Evolutions in Hydrophobic-Hydrophilic Surface Heterogeneous Chemistry

Studies toward tailoring macroscopic extreme wetting behaviors on a certain well-defined surface in multiphase media are significant but still at an infant stage. Herein, superantiwetting evolutions in the oil-water-air system can be programmed from single to quadruple superrepellence by controlling the surface hydrophobic-hydrophilic heterogeneous chemistry. Ammonia vapor exposure makes the realization of challenging superhydrophilicity-superoleophobicity possible in air medium, causing the transition from quadruple to triple superantiwetting states in the oil-water-air system. Upon UV illumination, only single superrepellence-underwater superoleophobicity is maintained on titanium dioxide (TiO₂, P25)-based coatings. A reversible transition between underoil superhydrophilicity and superhydrophobicity via an alternating UV irradiation and heating process leads to a switching between "water-absorbing" and "size-sieving" effects in water-in-oil emulsion separation. A comparative study for investigating two such effects in emulsion separation is further investigated. The current conceptual insights not only extend superwetting states to multiphase media, but can also deepen the understanding of the relationship between macroscopic extreme wetting behaviors and surface chemistry.

Robust Hydrogel Coating with Oil-Repellent Property in Air, Water, and Oil Surroundings

Development of a robust self-cleaning oil-repellent surface in a cost-efficient and green manner is highly desirable, yet still difficult to realize. Herein, we develop a poly(vinyl alcohol) (denoted as PVA) composite hydrogel on which the oily contaminations can be removed efficiently by water merely. Owing to its high affinity to water and resistance to oils, the water-wetted hydrogel establishes a slippery oil-repellent state in air, displays underwater superoleophobicity with ultralow adhesion to all probe oils, and blocks oil from permeating when immersed into an oil surrounding. Oily contaminations on the PVA hydrogel surface are removed just by titling or water immersion, with no oil residue left behind. This enhanced oil repellency was retained after hand-bending, water-jetting, and even 1000 cycles of sand abrasion, demonstrating mechanical robustness. Application of the PVA hydrogel-coated copper mesh is demonstrated to separate oil/water and oil/oil mixtures, with separation efficiency being greater than 98%.

WO3-Based Slippery Liquid-Infused Porous Surfaces with Long-Term Stability

Slippery liquid-infused porous surfaces (SLIPS) inspired by Nepenthes pitcher plants exhibit excellent hydrophobicity, antifouling and anti-icing properties, and long-term durability under pressure and temperature. SLIPS have potential applications including in biomedical devices, self-cleaning structures, and water-resistant coatings. A big challenge posed by SLIPS is the durability of the lubricant in the porous layer. Herein, uniform tungsten oxide nanofiber networks were synthesized on the surface of stainless steel through a simple one-step hydrothermal method. WO₃ nanofiber networks on stainless steels were chemically modified, filled with a lubricant, and prepared as SLIPS with excellent liquid repellency and good anti-biofouling properties. The relationship of the nanostructures and the slippery properties of the obtained WO₃-based SLIPS have been investigated in detail in this work. The liquid retention and long-term stability of the SLIPS were characterized using high shear force and water flow impact. We found that the long-term durability of the SLIPS is strongly related to the diameters and the Brunauer-Emmett-Teller surface areas of the WO₃ nanostructures. The durability of the SLIPS is better when the diameter of the WO₃ nanostructures is smaller. The WO₃-based SLIPS prepared in this work exhibit outstanding slippery property, anti-biofouling, and long-term stability under extreme conditions such as high shear rate and water washing and thus may have potential application for surface modification of medical devices in the future.

Superwetting Patterned Membranes with an Anisotropy/Isotropy Transition: Towards Signal Expression and Liquid Permeation

Superwetting membranes with responsive properties have attracted heightened attention because of their fine-tunable surface wettability. However, their functional diversity is severely limited by the "black-or-white" wettability transition. Herein, we describe a coating strategy to fabricate multifunctional responsive superwetting membranes with SiO₂ /octadecylamine patterns. The adjustable patterns in the responsive region are the key factor for functional diversity. Specifically, the coated part of the membrane displayed a superhydrophobicity/superhydrophilicity transition at different pH values, whereas the uncoated part exhibited invariant superhydrophilicity. On the basis of this anisotropy/isotropy transition, the membranes can serve as either responsive permeable membranes or signal-expression membranes, thus enabling the responsive separation and permeation of liquids with satisfactory separation efficiency (>99.90 %) and flux (ca. 60 L m^-2  h), as well as real-time liquid signal expression with alterable signals.

Enabling phase transition of infused lubricant in porous structure for exceptional oil/water separation

The fundamental mechanism behind oil/water separation materials is their surface wettability that allows either oil or water to pass through. The conventional materials for oil/water separation generally have extreme wettability, namely superhydrophilic for water separation and superhydrophobic for oil separation. Using easily accessible materials that are medium hydrophobic or even relatively hydrophilic for preparing highly efficient oil/water separators have rarely been reported. In this work, a new strategy by triggering phase transition of infused lubricant from liquid to solid state in porous structure is realized in fabricating slippery lubricant infused porous structure for oil/water separations. By infusing polyester fabric with coconut oil, after phase transition, excellent water repellency and oil permeability by an absorbing-permeating mechanism are achieved, despite the low water contact angle on the new material. Although the new phase transformable slippery lubricant infused porous structure, features much milder hydrophobicity than conventional oil/water separators, it can remove diverse types of oil from water with high efficiencies. The phase transformable slippery lubricant infused porous structure is able to maintain their water repellency after immersing in high concentration salt (10 wt% NaCl), acid (25 % HCl), alkaline (25 % NH₃·H₂O) solutions for 120 h, showing remarkably functional durability in harsh environment. The lubricant phase transition mechanism proposed in this study is universally applicable to porous substrates with various chemical compositions and pore structures, such as porous sponges or even daily life breads, for creating efficient oil/water separators, which can serve as a novel accessible design principle of phase transformable slippery lubricant infused porous structure for eco-friendly oil/water separators.

Dual super-amphiphilic modified cellulose acetate nanofiber membranes with highly efficient oil/water separation and excellent antifouling properties

Along with increasing oily, industrial wastewater and seawater pollution, oil spills-and their clean-up via the separation of oil and water-are still a worldwide challenge. Aiming to fabricate an oil/water separation membrane with excellent comprehensive performance, we report here a new type of multifunctional deacetylated cellulose acetate (d-CA) membrane. The cellulose acetate (CA) nanofiber membranes are fabricated by electrospinning and then deacetylated to obtain the d-CA nanofiber membranes, which are super-amphiphilic in air, oleophobic in water, and super-hydrophilic in oil. The multifunctional d-CA nanofiber membranes can be used as water-removal substances for oil/water mixtures, as well as emulsified oil/water and oil/corrosive aqueous systems, with gravity as the only needed driving force. The d-CA nanofiber membranes possess the highest separation flux, reaching up to 38,000 L/m²·h, and the highest separation efficiency, reaching up to 99.97 % for chloroform/water mixtures under the force of gravity. In fact, the separation flux was several times higher than that of commercial CA (c-CA) membranes. The excellent anti-pollution and self-cleaning abilities endow the membranes with powerful cyclic stability and reusability. The d-CA nanofiber membranes show great application prospects in chemical plants, textile mills, and the food industry, as well as offshore oil spills, to separate oil from water.

Metallic Liquid Gating Membranes

The development of liquid gating membrane (LGM) systems with tunable multiphase selectivity and antifouling properties is limited by the mechanical stability of the membrane materials. The mechanical integrity of most polymeric membranes can be compromised by deformation under harsh operating conditions (elevated temperatures, corrosive environments, foulants, etc.), ultimately leading to their failure. Here, a facile electrochemical approach to the fabrication of multifunctional metal-based liquid gating membrane systems is presented. The membrane porosity, pore size, and membrane surface roughness can be tuned from micro- to nanometer scale, enabling function under a variety of operating conditions. The prepared LGMs demonstrate controllable gas-liquid selectivity, superior resistance to corrosive conditions and fouling chemicals, and significant reduction of the transmembrane pressure required for the separation process, resulting in lower energy consumption. The stability of the gating liquid is confirmed experimentally through sustained fouling resistance and further supported by the interfacial energy calculations. The mechanically robust metal-based membrane systems reported in this study significantly extend the operating range of LGMs, prompting their applications in water treatment processes such as wastewater treatment, degassing, and multiphase separation.

Processing supramolecular framework for free interconvertible liquid separation

Nanoporous structures constructed by small molecular components exhibited vigorous materials potentials. While maintianing uniform porosity and functional properties, more applicable processing methods for the solid powders need to be considered and the improvement of binding interactions represents a preferable approach for structural flexibility. Here, by combining ionic interaction and host-guest inclusion, we constructed flexible supramolecular frameworks composing of inorganic polyanionic clusters, cationic organic hosts, and a bridging guest. The formed layer framework structure assemblies grew into nano-fibers and then supramolecular gels, donating highly convenient processability to porous materials. A simple spin-coating generated a new type of liquid separation membranes which showed structural stability for many liquids. The surface properties can be facilely modulated via filling a joystick liquid and then a hydrophilic/hydrophobic liquid into the porous frameworks, providing in-situ consecutive switchings for cutting liquids. This strategy extends the potential of flexible supramolecular frameworks for responsive materials in the laboratory and in industry.

Porous materials show potential in various technological fields but processing of these materials remains challenging which hampers their application. Here the authors demonstrate an organic/inorganic framework composed of a supramolecular gel as processable porous material.

Liquid-based porous membranes

The confluence of available membrane materials and the explorations into fluid behaviors have revolutionized liquid-based porous membranes, which deserve more attention.

Bioinspired Slippery Lubricant-Infused Surfaces With External Stimuli Responsive Wettability: A Mini Review

Responsive slippery lubricant-infused surfaces (SLIS) have attracted substantial attention because of the high demand of fundamental research and practical applications, such as controllable liquid-repellency, intelligent, and easy-to-implement wettability switching. In this review, advanced development of responsive slippery surfaces is briefly summarized upon various external stimuli, including stress, electrical field, magnetic field, and temperature. In addition, remaining challenge and prospect are also discussed.

Tunable Ionic Liquid-Water Separation Enabled by Bioinspired Superwetting Porous Gel Membranes

Selectively wettable porous membranes have been demonstrated to be outstanding energy-efficient materials for use in continuous liquid separation (including separating industrial oils or common organic solvents), in environmental protection, and in the chemical industry. The continuous separation of ionic liquids (ILs), which is important for chemical synthesis and chemical engineering, has been less explored. Herein, we report an on-demand liquid-passed-through strategy for the efficient and continuous separation of ILs from their aqueous solutions via the utilization of bioinspired liquid-infused porous gel membranes. We show how a porous gel film can be used to design functional membranes for reliable separation that is independent of the surface energies of the separated liquids. This tunable IL-water separation strategy can further enable highly efficient and continuous purification and recycling of ILs for use in IL-related chemical processes and is promising for scalable processes.

Flexible Multifunctional Porous Nanofibrous Membranes for High-Efficiency Air Filtration

Particulate matter (PM) discharged along with the rapid industrialization and urbanization hazardously threatens ecosystems and human health. Membrane-based filtration technology has been proved to be an effective approach to capture PM from the polluted air. However, the fabrication of filtration membranes with excellent reusability and antibacterial activity has rarely been reported. Herein, the flexible multifunctional porous nanofibrous membranes were fabricated by embedding Ag nanoparticles into the electrospun porous SiO₂-TiO₂ nanofibers via an impregnation method, which integrated the abilities of PM filtration and antibacterial performance. Compared with the reported air filters, the resultant membrane (Ag@STPNM) with high surface polarity and porous structure possessed the low density, high removal efficiency, and small pressure drop. For instance, the removal efficiency and the pressure drop of Ag@STPNM with a basis weight of only 3.9 g m^-2 for PM_2.5 reached 98.84% and 59 Pa, respectively. In terms of the excellent thermal stability of Ag@STPNM, the adsorbed PM could be removed simply by a calcination process. The filtration performance of Ag@STPNM kept stable during five purification-regeneration cycles and the long-time filtration for 12 h, exhibiting excellent recyclability and durability. Furthermore, the embedded Ag nanoparticles could achieve the effective resistance to the breeding of bacteria on Ag@STPNM, giving the bacteriostatic rate of 95.8%. Therefore, Ag@STPNM holds promising potentials as a highly efficient, reusable, and antibacterial air filter in the practical purification of the indoor environment or personal air.

A dual underliquid superlyophobic surface in organic media for on-demand separation of immiscible organic liquid mixtures

High-efficiency on-demand separation of immiscible organic liquid mixtures has rarely been achieved. Herein, we developed a facile and scalable protocol to prepare a practical dual underliquid superlyophobic surface for polar liquid droplets in nonpolar liquid media or nonpolar liquid droplets in polar liquid media. The challenging on-demand organic liquid separation was successfully realized.

Underliquid Superlyophobic Copper-Coated Meshes for the Separation of Immiscible Organic Liquid Mixtures

Superwettable materials have been studied extensively and successfully applied in various forms liquid separation. However, because of low surface tension differences, organic liquids (OLs) exhibit approximate wettability on most of the material surfaces, and the separation of OL mixtures remains a challenge. The current separation method for OL mixtures is mainly dependent on covalent modification to precisely control the surface energy of the membranes, which is extremely complicated. Herein, we demonstrate a novel concept of underliquid superlyophobicity for the separation of immiscible OLs mixtures, which only depend on a relatively stable liquid-repellent interface. Furthermore, the minimum system's free-energy principle was used to explain this wetting behavior. Different from the previous reports, the method of separation of OL mixtures does not involve various low-surface-energy materials, thus it is facile and eco-friendly. Our research provides a general strategy for the efficient separation of immiscible OLs mixtures and is expected to promote the development of superwettable materials for multiphase liquid separation.

Under-liquid dual superlyophobic nanofibrous polymer membranes achieved by coating thin-film composites: a design principle

Surfaces with under-liquid dual superlyophobicity have garnered tremendous interest because of their promising applications, but their unexplored underlying nature restricts the designed construction of such surfaces. Herein, we coated the thin-film composites with different terminal groups over the electrospun polyacrylonitrile nanofibrous membranes, which afforded the membranes excellent stability in organic solvents, as well as modulated under-liquid wetting behaviors. Among them, the representative under-liquid dual superlyophobic 4-cyan-Ph-terminated membrane could realize highly efficient separation of all types of oil/water mixtures and even emulsions. Moreover, we found that the under-liquid wetting behaviors could be classified in terms of the intrinsic water contact angle (θ w). By comparing the total interfacial energy, we proved that the under-liquid dual lyophobic surfaces were thermodynamically metastable. On this basis, we could predict the θ w of rough surfaces with the under-liquid dual lyophobicity in a given oil-water-solid system (e.g., 47.3-89.1° in cyclohexane-water-solid system, R = 2). This work provides a design principle for the fabrication of under-liquid dual superlyophobic surfaces, which will open potential applications in diverse fields in terms of such smart surfaces.

Robust Superhydrophobic/Superoleophilic Wrinkled Microspherical MOF@rGO Composites for Efficient Oil-Water Separation

Graphene/MOF-based composite materials in three-dimensional (3D) architectures are promising for the treatment of oil-containing wastewater by absorption owing to their intrinsic properties of graphene and metal-organic frameworks (MOFs), such as high porosity, ultralow density, and facilely tailored superwettability. In this study, novel wrinkled 3D microspherical MOF@rGO composites with both superhydrophobic and superoleophilic properties were developed by embedding MOF nanoparticles between graphene oxide (GO) nanosheets, followed by high-temperature reduction self-assembly. The microspherical composites feature a unique micro/nano hierarchy consisting of crumpled reduced GO (rGO) nanosheets intercalated with well-dispersed MOF nanoparticles. Combined with the superwettability and abundant meso/microporosity, the peculiar architectures of wrinkled ZIF-8@rGO microspheres show very fast absorption rates and high sorption selectivity for organic solvents and oils from water.

Superwettability-Based Interfacial Chemical Reactions

Superwetting interfaces arising from the cooperation of surface energy and multiscale micro/nanostructures are extensively studied in biological systems. Fundamental understandings gained from biological interfaces boost the control of wettability under different dimensionalities, such as 2D surfaces, 1D fibers and channels, and 3D architectures, thus permitting manipulation of the transport physics of liquids, gases, and ions, which profoundly impacts chemical reactions and material fabrication. In this context, the progress of new chemistry based on superwetting interfaces is highlighted, beginning with mass transport dynamics, including liquid, gas, and ion transport. In the following sections, the impacts of the superwettability-mediated transport dynamics on chemical reactions and material fabrication is discussed. Superwettability science has greatly enhanced the efficiency of chemical reactions, including photocatalytic, bioelectronic, electrochemical, and organic catalytic reactions, by realizing efficient mass transport. For material fabrication, superwetting interfaces are pivotal in the manipulation of the transport and microfluidic dynamics of liquids on solid surfaces, leading to the spatially regulated growth of low-dimensional single-crystalline arrays and high-quality polymer films. Finally, a perspective on future directions is presented.

An oil/water separation nanofibrous membrane with a 3-D structure from the blending of PES and SPEEK

A new nanofibrous membrane (NFM) was prepared by blending polyethersulfone (PES) and sulfonated poly(ether ether ketone) (SPEEK) via electrospinning. The membrane exhibits good thermal stability and high mechanical strength. The hydrophilicity of the membrane could be controlled by adjusting the mass ratio of PES to SPEEK. PES acts as the backbone fiber and provides high mechanical strength, while SPEEK provides hydrophilic functional groups due to the strong hydrophilicity of the sulfonic group. The test results show that the composite NFM integrates the advantages of the two polymers. Simple adjustment of the weight ratios of the two polymers can enable an adjustable flux so that the membrane can be used for different kinds of oil/water separation. The results show that NFMs can not only separate immiscible oil/water systems but also separate oil-in-water emulsions. The immiscible oil/water separation process was driven only by gravity and had a high flux of 1119.63 Lm−2 h−1. This separation process conserves energy, which is beneficial for environmental protection. The separation flux of the oil-in-water emulsion was 758.71 Lm−2 h−1 bar−1 based on measurements under different pressures, and the separation purity total organic carbon was below 50 ppm. This work indicates that a membrane comprised of PES and SPEEK has excellent performance and can be used in different fields.

Amino-Functionalized Porous Nanofibrous Membranes for Simultaneous Removal of Oil and Heavy-Metal Ions from Wastewater

Both oil spill and heavy-metal ions in the industrial wastewater cause severe problems for aquatic ecosystem and human health. In the present work, the electrospun superamphiphilic SiO₂-TiO₂ porous nanofibrous membranes (STPNMs) comprised of intrafiber mesopores and interfiber macropores are modified by an amino-silanization reaction, which affords the membrane (ASTPNMs) the ability to simultaneously remove the oil contaminants and the water-soluble heavy-metal ions from wastewater. The underwater superoleophobicity of ASTPNMs facilitates the highly efficient separation of water and various oils, even emulsifier-stabilized emulsion. Meanwhile, an optimal modification time (15 min, ASTPNM-15) is important for maintaining the under-oil superhydrophilicity of the membrane, based on which the oil contaminant in membrane can be easily cleaned by water alone, showing excellent self-cleaning performance. The adsorption of Pb²⁺ over ASTPNM-15 reaches equilibrium at around 20 min, and the monolayer adsorption capacity is 142.86 mg g^-1 at pH = 5 at 20 °C. In the breakthrough processes, the permeation volume of ASTPNM-15 for the purification of Pb²⁺ (5 ppm, pH = 5) reaches 160 mL when the concentration of Pb²⁺ in the filtrate increases to 0.05 ppm. The separation efficiencies of ASTPNM-15 for simulated wastewater containing both oil spill and various heavy-metal ions (Pb²⁺, Cr³⁺, Ni²⁺) are larger than 99.5%. In addition, the separation capacity keeps stable over five purification-regeneration cycles without obvious decrease, proving excellent recyclability and reusability of ASTPNM-15 for practical applications.

Slippery Surface Based on Photoelectric Responsive Nanoporous Composites with Optimal Wettability Region for Droplets' Multifunctional Manipulation

The development of responsive slippery surfaces is important because of the high demand for such materials in the fields of liquid manipulation on biochips, microfluidics, microreactions, and liquid-harvesting devices. Although great progress has been achieved, the effect of substrate wettability on slippery surfaces stability is overlooked by scientists. In addition, current responsive slippery surfaces generally function utilizing single external stimuli just for imprecisely controlling liquid motion, while advanced intelligences are always expected to be integrated into one smart interface material for widespread multifunctional applications. Therefore, designing slippery surfaces that collaboratively respond to complex external stimuli and possess sophisticated composite function for expanding applications from controlling droplets motion to patterned writing is urgently needed but remains a challenge. Here, a photoelectric cooperative-responsive slippery surface based on ZnO nanoporous composites is demonstrated. First, the effect of composite surface wettability on slippery surface stability is systematically researched and the optimum wettability region for fabricating stable slippery surfaces is determined. Furthermore, controllable droplet motion and patterned writing are realized on the same slippery surfaces under photoelectric cooperative stimuli, and the related response mechanism is also deeply studied. This kind of material has potential applications in biochips, microfluidics, in situ patterning, and water-harvesting systems.

Polyamidoxime chain length drives emergent metal-binding phenomena

Emergence is complex behavior arising from the interactions of many simple constituents that do not display such behavior independently. Polyamidoxime (PAO) uranium adsorbents show such phenomena, as recent works articulate that the polymer binds uranium differently than the monomeric constituents. In order to investigate the origins of this emergent uranium-binding behavior, we synthesized a series of amidoxime polymers with low polydispersity and small molecules with lengths ranging from 1 to 125 repeat units. Following immersion in a uranyl-containing solution, the local, intermediate, and macroscopic structures were investigated by X-ray absorption fine structure (XAFS) spectroscopy, small angle neutron scattering (SANS), and dynamic light scattering (DLS). Fits of the extended XAFS (EXAFS) region revealed a progressive change in uranium coordination environment as a function of polymer molecular weight, identifying chain length as a driving force in emergent metal binding and resolving the controversy over how amidoxime adsorbents bind uranium.

A liquid-based Janus porous membrane for convenient liquid–liquid extraction and immiscible oil/water separation

A novel liquid-based Janus porous membrane system with self-gating abilities, improved interfacial floatability is used for the practical applications of liquid–liquid extraction and oil/water separation with antifouling behavior.

Organic Media Superwettability: On-Demand Liquid Separation by Controlling Surface Chemistry

Superwettability involving water affinity has demonstrated prominent advantages in oil-water separation. However, superwetting surfaces in nonpolar liquid-polar liquid systems are rarely explored for the separation of organic liquids. In this work, a protocol of elaborately controlling surface chemistry is presented to construct dual superlyophobic surfaces for polar or nonpolar liquids in opposite organic media. On two kinds of silver-roughened copper coatings, a polar hydroxyl group is subtly integrated with nonpolar perfluoroalkyl chain at the nanoscale. Prewetted by one organic liquid, the obtained dual superlyophobic mesh can selectively intercept other immiscible organic liquids, realizing high-efficiency on-demand separation. In theory, the dual superlyophobic surfaces in organic media are strongly dependent on their affinity toward polar liquids and the surface roughness. The discovery may promote the development of organic liquid-related interfacial materials.

Continuous in Situ Extraction toward Multiphase Complex Systems Based on Superwettable Membrane with Micro-/Nanostructures

Liquid-phase extraction is widely used in the chemical industry. Traditional extracting routes always involve multiple procedures, need a large floor space, and have long operating time. "Continuous in situ extraction" that can conduct a real-time integration of solutes extraction and solvents separation simultaneously would be of great significance. Superwettable materials offer us a good choice to separate different immiscible solvents; herein, we achieve continuous in situ extraction of multiphase complex systems by using a porous polytetrafluoroethylene membrane with nanostructure-induced superwettability. It realizes a rapid, selective, and efficient real-time removal of various extracting agents during a continuous process due to their wetting differences. Compared with traditional extraction, our route shows a distinct superiority on saving operating time, enhancing liquid recovery, and simplifying procedures, while still retaining high extracting performance. In addition, our membrane possesses excellent durability even after long-term work in harsh chemical environments or under strong mechanical impacts. Thus, we believe that it will provide a potential alternative for current industrial extractions.

Tunable Microscale Porous Systems with Dynamic Liquid Interfaces

Solid microscale porous material systems have attracted more attention in recent years due to their various potential applications, such as energy source transportations, biomedical devices, wastewater treatments, phase separations, etc. However, such systems are still plagued with many issues including fouling, mechanical fragility, inability to self-heal, and low recyclability that restrict them for further industrial applications. Dynamic liquid-based microscale porous material systems, especially porous surfaces and membranes, provide a new opportunity for resolving these issues and possess many benefits, such as antifouling, slippery, transparent, recovery, self-healing, and recycling properties. This Concept is mainly concerned with how to obtain tunable microscale porous systems with dynamic liquid interfaces, and their applications from the surfaces to membranes. The authors hope this concept will attract interest of scientists in areas related to the rapid development and application of various liquid-based porous systems.