Linking oxidative and reductive clusters to prepare crystalline porous catalysts for photocatalytic CO2 reduction with H2O

Porphyrin Supramolecular Nanoassembly/C3N4 Nanosheet S-Scheme Heterojunctions for Selective Photocatalytic CO2 Reduction toward CO

The photocatalytic reduction of CO2 with H2O into valuable chemicals is a sustainable carbon-neutral technology for renewable energy; however, the photocatalytic activity and product selectivity remain challenging. Herein, an S-scheme heterojunction photocatalyst with superior CO2 photoreduction performance─porous C3N4 (CN) nanosheets anchored with zinc(II) tetra(4-cyanophenyl)porphyrin (ZnTP) nanoassemblies (denoted as ZnTP/CN)─was designed and prepared via a simple self-assembly process. The constructed ZnTP/CN heterojunction had rich accessible active sites, improved CO2 absorption capacity, and high charge carrier separation efficiency caused by the S-scheme heterojunction. As a result, the obtained ZnTP/CN catalyst exhibited considerable activity for photocatalytic CO2 reduction, yielding CO with a generation rate of 19.4 μmol g-1·h-1 and a high selectivity of 95.8%, which is much higher than that of pristine CN nanosheets (4.53 μmol g-1·h-1, 57.4%). In addition, theoretical calculations and in situ Fourier transform infrared spectra demonstrated that the Zn sites in the porphyrin unit favor CO2 activation and *COOH formation as well as CO desorption, thereby affording a high CO selectivity. This work provides insight into the design and fabrication of efficient S-scheme heterostructure photocatalysts for solar energy storage.

Construction of Low-Cost Z-Scheme Heterojunction Cu2O/PCN-250 Photocatalysts Simultaneously for the Enhanced Photoreduction of CO2 to Alcohols and Photooxidation of Water

Solar-driven high-efficiency conversion of CO2 with water vapor into high-value-added alcohols is a promising approach for reducing CO2 emissions and achieving carbon neutrality. However, the rapid recombination of photogenerated carriers and low CO2 adsorption capacity of photocatalysts are usually the factors that limit their applicability. Herein, a series of low-cost Z-scheme heterostructures Cu2O/PCN-250-x are constructed by in situ growth of ultrasmall Cu2O nanoparticles on PCN-250. A systematic investigation revealed that there is a strong interaction between Cu2O nanoparticles and PCN-250. The resulting Cu2O/PCN-250-2 exhibits excellent photogenerated carrier separation efficiency and CO2 adsorption capacity, which dramatically promote the conversion of CO2 into alcohols. Notably, the total yield of 268 μmol gcat-1 for the production of CH3OH and CH3H2OH is superior to that of isolated PCN-250 and Cu2O. This study provides a new perspective for the design of a Cu2O nanoparticle/metal-organic framework Z-scheme heterojunction for the reduction of CO2 to alcohols with water vapor.

Indirect Electrocatalysis S─N/S─S Bond Construction by Robust Polyoxometalate Based Foams

Indirect electrocatalytic conversion of cheap organic raw materials via the activation of S─H and N─H bonds into the value-added S─N/S─S bonds chemicals for industrial rubber production is a promising strategy to realize the atomic economic reaction, during which the kinetic inhibition that is associated with the electron transfer at the electrode/electrolyte interface in traditional direct electrocatalysis can be eliminated to achieve higher performance. In this work, a series of di-copper-substituted phosphotungstatebased foams (PW10 Cu2 @CMC) are fabricated with tunable loadings (17 to 44 wt%), which can be successfully applied in indirect electrocatalytic syntheses of sulfenamides and disulfides. Specifically, the optimal PW10 Cu2 @CMC (44 wt%) exhibits excellent electrocatalytic performance for the construction of S─N/S─S bonds (yields up to 99%) coupling with the efficient production of H2 (≈50 µmol g-1  h-1 ). Remarkably, it enables the scale-up production (≈14.4 g in a batch experiment) and the obtained products can serve as rubber vulcanization accelerators with superior properties to traditional industrial rubber additives in real industrial processes. This powerful catalysis system that can simultaneously produce rubber vulcanization accelerator and H2 may inaugurate a new electrocatalytic avenue to explore polyoxometalate-based foam catalysts in electrocatalysis field.

Cs2 SnCl6 : To Emit or to Catalyze? Te4+ Ion Calls the Shots

A low concentration of Te4+ doping is found to be capable of endowing the lead-free Cs2 SnCl6 perovskites with excellent photoluminescence quantum yield (PLQY), while further increasing Te4+ concentration leads to PLQY deterioration. The mechanism behind the improved PLQY is intensively studied and reported elsewhere. However, little work is conducted to understand the decreased PLQY at high doping levels and to explore its implications for non-PL-related applications. Here, it is demonstrated that the Te4+ -incorporated Cs2 SnCl6 can be promising candidate for efficient CO2 photocatalysis. An optimum photocatalytic performance is achieved when Te4+ concentration reaches as high as 50%, at which point significant PL quenching has occurred. Through a detailed spectral characterization, such concentration-dependent functionality is attributed to systematic changes in both electronic and local crystal structure, which allow a robust regulation of excitation energy relaxation channels. These findings expand the scope of available photocatalysts for CO2 reduction and also inform synthetic planning for the preparation of multifunctional Pb-free metal halide perovskites.

Doping transition metals to modulate the chirality and photocatalytic activity of rare earth clusters

In this paper, we report the successful assembly of achiral {Ln6M} ([Ln6M(μ3-OH)8(acac)12(CH3O)x(CH3OH)y], Ln = La, M = Mn, Co, Fe) and chiral {Nd9Fe2} ([Nd9Fe2(μ4-O)(μ3-OH)14(acac)16(NO3)(CH3OH)2(H2O)3]) rare earth clusters using achiral rigid ligands and a transition metal doping strategy. {Ln6M} can be viewed as the fusion of two {Ln3M} tetrahedrons by sharing vertices. {Nd9Fe2} results from the fusion of four {Ln3M} tetrahedrons by vertice and edge sharing. The substitution of Ln with transition metal leads to changes in the coordination pattern around neighboring Ln, which triggers the switch of metal center chirality. This study demonstrates the potentiality of utilizing transition metal doping and rigid ligand to control the chirality of rare earth clusters. In addition, the photocatalytic CO2 activity of these transition metal-doped rare earth clusters has been studied.

Modulating the Density of Catalytic Sites in Multiple-Component Covalent Organic Frameworks for Electrocatalytic Carbon Dioxide Reduction

It is generally assumed that the more metal atoms in covalent organic frameworks (COFs) contribute to higher activity toward electrocatalytic carbon dioxide reduction (CO2RR) and hindered us in exploring the correlation between the density of catalytic sites and catalytic performances. Herein, we have constructed quantitative density of catalytic sites in multiple COFs for CO2RR, in which the contents of phthalocyanine (H2Pc) and nickel phthalocyanine (NiPc) units were preciously controlled. With a molar ratio of 1/1 for the H2Pc and NiPc units in COFs, the catalyst achieved the highest selectivity with a carbon monoxide Faradaic efficiency (FECO) of 95.37% and activity with a turnover frequency (TOF) of 4713.53 h-1. In the multiple H2Pc/NiPc-COFs, the electron-donating features of the H2Pc units provide electron transport to the NiPc centers and thus improved the binding ability of CO2 and intermediates on the NiPc units. The theoretical calculation further confirmed that the H2Pc units donated their electrons to the NiPc units in the frameworks, enhanced the electron density of the Ni sites, and improved the binding ability with Lewis acidic CO2 molecules, thereby boosting the CO2RR performance. This study provides us with new insight into the design of highly active catalysts in electrocatalytic systems.

A Fully Conjugated Covalent Organic Framework with Oxidative and Reductive Sites for Photocatalytic Carbon Dioxide Reduction with Water

Constructing a powerful photocatalytic system that can achieve the carbon dioxide (CO2 ) reduction half-reaction and the water (H2 O) oxidation half-reaction simultaneously is a very challenging but meaningful task. Herein, a porous material with a crystalline topological network, named viCOF-bpy-Re, was rationally synthesized by incorporating rhenium complexes as reductive sites and triazine ring structures as oxidative sites via robust -C=C- bond linkages. The charge-separation ability of viCOF-bpy-Re is promoted by low polarized π-bridges between rhenium complexes and triazine ring units, and the efficient charge-separation enables the photogenerated electron-hole pairs, followed by an intramolecular charge-transfer process, to form photogenerated electrons involved in CO2 reduction and photogenerated holes that participate in H2 O oxidation simultaneously. The viCOF-bpy-Re shows the highest catalytic photocatalytic carbon monoxide (CO) production rate (190.6 μmol g-1  h-1 with about 100 % selectivity) and oxygen (O2 ) evolution (90.2 μmol g-1 h-1 ) among all the porous catalysts in CO2 reduction with H2 O as sacrificial agents. Therefore, a powerful photocatalytic system was successfully achieved, and this catalytic system exhibited excellent stability in the catalysis process for 50 hours. The structure-function relationship was confirmed by femtosecond transient absorption spectroscopy and density functional theory calculations.

Single Site Coordination Enabled Construction of Metal-Diketimine-Linked Covalent Organic Frameworks for Boosted Electrooxidation of Biomass Derivative

Aromatic aldehydes are widely used for the construction of covalent organic frameworks (COFs). However, due to the high flexibility, high steric hindrance, and low reactivity, it remains challenging to synthesize COFs using ketones as building units, especially the highly flexible aliphatic ones. Here, the single nickel site coordination strategy is reported to lock the configurations of the highly flexible diketimine to transform discrete oligomers or amorphous polymers into highly crystalline nickel-diketimine-linked COFs (named as Ni-DKI-COFs). The strategy has been successfully extended to the synthesis of a series of Ni-DKI-COFs by the condensation of three flexible diketones with two tridentate amines. Thanks to the ABC stacking model with high amount and easily accessible single nickel (II) sites on their 1D channels, Ni-DKI-COFs are exploited as well-defined electrocatalyst platforms for efficiently electro-upgrading biomass-derived 5-Hydroxymethylfurfural (HMF) into value-added 2,5-furandicarboxylic acid (FDCA) with a 99.9% yield and a 99.5% faradaic efficiency as well as a high turnover frequency of 0.31 s-1 .

Simultaneous photocatalytic biomass conversion and CO2 reduction over high crystalline oxygen-doped carbon nitride

Simultaneous photocatalytic biorefinery and CO2 reduction to co-produce fuels and high value-added chemicals have recently attracted significant attention; however, comprehensive studies are still lacking. Herein, we report the preparation of highly crystalline oxygen-doped carbon nitride nanotubes (O-CNNTs-x) using an ammonium fluoride-assisted hydrothermal/calcination strategy. The hollow structure, high crystallinity, and O incorporation endowed the O-CNNTs-x with photocatalytic activity by considerably improving optical absorption and modulating the charge carrier motion. The lactic acid yield and CO evolution rate over O-CNNTs-2.0 reached 82.08% and 67.95 μmol g-1 h-1, which are 1.57- and 7.37-fold times higher than those of CN, respectively. Moreover, ·OH plays a key role in the oxidation half-reaction. This study offers a facile approach for fabricating highly crystalline element-doped CN with a customizable morphology and electronic properties and demonstrates the viability of co-photocatalytic CO2 reduction and biomass selective oxidation.

Three dimensional cyclic trinuclear units based metal-covalent organic frameworks for electrochemical CO2RR

A three-dimensional metal-covalent organic framework (3D-MCOF) based on cyclic trinuclear units was synthesized using organic tetrahedral linkers and copper-based cyclic trinuclear complexes. The novel type of 3D-MCOF, named 3D-CTU-MCOF, with the ctn topology, is reported herein for the first time. Our study demonstrated enhanced electrocatalytic capacity for CO2 reduction reaction of 3D-CTU-MCOF compared to independent cyclic trinuclear units.

Regulation of Redox Molecular Junctions in Covalent Organic Frameworks for H2 O2 Photosynthesis Coupled with Biomass Valorization

H2 O2 photosynthesis coupled with biomass valorization can not only maximize the energy utilization but also realize the production of value-added products. Here, a series of COFs (i.e. Cu3 -BT-COF, Cu3 -pT-COF and TFP-BT-COF) with regulated redox molecular junctions have been prepared to study H2 O2 photosynthesis coupled with furfuryl alcohol (FFA) photo-oxidation to furoic acid (FA). The FA generation efficiency of Cu3 -BT-COF was found to be 575 mM g-1 (conversion ≈100 % and selectivity >99 %) and the H2 O2 production rate can reach up to 187 000 μM g-1 , which is much higher than Cu3 -pT-COF, TFP-BT-COF and its monomers. As shown by theoretical calculations, the covalent coupling of the Cu cluster and the thiazole group can promote charge transfer, substrate activation and FFA dehydrogenation, thus boosting both the kinetics of H2 O2 production and FFA photo-oxidation to increase the efficiency. This is the first report about COFs for H2 O2 photosynthesis coupled with biomass valorization, which might facilitate the exploration of porous-crystalline catalysts in this field.

Synergy of Surface Phosphates and Oxygen Vacancies Enables Efficient Photocatalytic Methane Conversion at Room Temperature

Room-temperature photocatalytic conversion of CH₄ into liquid oxygenates with O₂/H₂O provides an appealing route for sustainable chemical industry, which, however, suffers from poor efficiency due to the undesired carrier kinetics and low yield of reactive oxygen species of the currently available photocatalysts. Here, we report an effective surface engineering strategy where concurrent constructions of oxygen vacancies and phosphate sites on TiO₂ nanosheets address the above challenge. The surface oxygen vacancies and phosphates are respective acceptors of photogenerated electrons and holes for promoted separation and migration of charge carriers. Moreover, in addition to the facilitated activation of O₂ to ^•OH by electrons at oxygen vacancies, the surface phosphates also facilely adsorb H₂O via hydrogen bonds and thus effectively transfer holes to H₂O for enhanced ^•OH production, thereby boosting CH₄ conversion. As a result, compared with TiO₂ sheets with only oxygen vacancies, a 2.8 times improvement in liquid oxygenate production with near-unity selectivity is achieved by virtue of the synergy of surface oxygen vacancies and phosphate sites, together with an unprecedent quantum efficiency of 19.8% under 365 nm irradiation.

Postsynthetic Annulation of Three-Dimensional Covalent Organic Frameworks for Boosting CO2 Photoreduction

Three-dimensional covalent organic frameworks (3D COFs), with interconnected pores and exposed functional groups, provide new opportunities for the design of advanced functional materials through postsynthetic modification. Herein, we demonstrate the successful postsynthetic annulation of 3D COFs to construct efficient CO₂ reduction photocatalysts. Two 3D COFs, NJU-318 and NJU-319Fe, were initially constructed by connecting hexaphenyl-triphenylene units with pyrene- or Fe-porphyrin-based linkers. Subsequently, the hexaphenyl-triphenylene moieties within the COFs were postsynthetically transformed into π-conjugated hexabenzo-trinaphthylene (pNJU-318 and pNJU-319Fe) to enhance visible light absorption and CO₂ photoreduction activity. The optimized photocatalyst, pNJU-319Fe, shows a CO yield of 688 μmol g^-1, representing a 2.5-fold increase compared to that of unmodified NJU-319Fe. Notably, the direct synthesis of hexabenzo-trinaphthylene-based COF catalysts was unsuccessful due to the low solubility of conjugated linkers. This study not only provides an effective method to construct photocatalysts but also highlights the unlimited tunability of 3D COFs through structural design and postsynthetic modification.

In Situ Encapsulation of Graphene Quantum Dots in Highly Stable Porphyrin Metal-Organic Frameworks for Efficient Photocatalytic CO2 Reduction

Photocatalytic CO₂ reduction to valuable hydrocarbon solar fuel is of great significance but still challenging. Strong CO₂ enrichment ability and easily adjustable structures make metal-organic frameworks (MOFs) potential photocatalysts for CO₂ conversion. Even though pure MOFs have the potential for photoreduction of CO₂, the efficiency is still quite low due to rapid photogenerated electron-hole recombination and other drawbacks. In this work, graphene quantum dots (GQDs) were in situ encapsulated into highly stable MOFs via a solvothermal method for this challenging task. The GQDs@PCN-222 with encapsulated GQDs showed similar Powder X-ray Diffraction (PXRD) patterns to PCN-222, indicating the retained structure. The porous structure was also retained with a Brunauer-Emmett-Teller (BET) surface area of 2066 m²/g. After incorporation of GQDs, the shape of GQDs@PCN-222 particles remained, as revealed by the scanning electron microscope (SEM). As most of the GQDs were covered by thick PCN-222, it was hard to observe those GQDs using a transmission electron microscope (TEM) and a high-resolution transmission electron microscope (HRTEM) directly, the treatment of digested GQDs@PCN-222 particles by immersion in a 1 mM aqueous KOH solution can make the incorporated GQDs visible in TEM and HRTEM. The linker, deep purple porphyrins, make MOFs a highly visible light harvester up to 800 nm. The introduction of GQDs inside PCN-222 can effectively promote the spatial separation of the photogenerated electron-hole pairs during the photocatalytic process, which was proved by the transient photocurrent plot and photoluminescence emission spectra. Compared with pure PCN-222, the obtained GQDs@PCN-222 displayed dramatically enhanced CO production derived from CO₂ photoreduction with 147.8 μmol/g/h in a 10 h period under visible light irradiation with triethanolamine (TEOA) as a sacrificial agent. This study demonstrated that the combination of GQDs and high light absorption MOFs provides a new platform for photocatalytic CO₂ reduction.

High-Crystallinity BiOCl Nanosheets as Efficient Photocatalysts for Norfloxacin Antibiotic Degradation

Semiconductor photocatalysts are essential materials in the field of environmental remediation. Various photocatalysts have been developed to solve the contamination problem of norfloxacin in water pollution. Among them, a crucial ternary photocatalyst, BiOCl, has attracted extensive attention due to its unique layered structure. In this work, high-crystallinity BiOCl nanosheets were prepared using a one-step hydrothermal method. The obtained BiOCl nanosheets showed good photocatalytic degradation performance, and the degradation rate of highly toxic norfloxacin using BiOCl reached 84% within 180 min. The internal structure and surface chemical state of BiOCl were analyzed using scanning electron microscopy (SEM), transmission electron microscopy (TEM), Raman, Fourier transform infrared spectroscopy (FTIR), UV-visible diffuse reflectance (UV-vis), Brunauer-Emmett-Teller (BET), X-ray photoelectron spectra (XPS), and photoelectric techniques. The higher crystallinity of BiOCl closely aligned molecules with each other, which improved the separation efficiency of photogenerated charges and showed high degradation efficiency for norfloxacin antibiotics. Furthermore, the obtained BiOCl nanosheets possess decent photocatalytic stability and recyclability.

Engineering Single Cu Sites into Covalent Organic Framework for Selective Photocatalytic CO2 Reduction

Photocatalytic CO₂ conversion into value-added chemicals is a promising route but remains challenging due to poor product selectivity. Covalent organic frameworks (COFs) as an emerging class of porous materials are considered as promising candidates for photocatalysis. Incorporating metallic sites into COF is a successful strategy to realize high photocatalytic activities. Herein, 2,2'-bipyridine-based COF bearing non-noble single Cu sites is fabricated by chelating coordination of dipyridyl units for photocatalytic CO₂ reduction. The coordinated single Cu sites not only significantly enhance light harvesting and accelerate electron-hole separation but also provide adsorption and activation sites for CO₂ molecules. As a proof of concept, the Cu-Bpy-COF as a representative catalyst exhibits superior photocatalytic activity for reducing CO₂ to CO and CH₄ without photosensitizer, and impressively, the product selectivity of CO and CH₄ can be readily modulated only by changing reaction media. Experimental and theoretical results reveal the crucial role of single Cu sites in promoting photoinduced charge separation and solvent effect in regulating product selectivity, which provides an important sight onto the design of COF photocatalysts for selective CO₂ photoreduction.

Exfoliation of a Two-Dimensional Metal-Organic Framework for Enhanced Photocatalytic CO2 Reduction

A two-dimensional metal-organic framework, FICN-12, was constructed from tris[4-(1H-pyrazole-4-yl)phenyl]amine (H₃TPPA) ligands and Ni₂ secondary building units. The triphenylamine moiety in the H₃TPPA ligand readily absorbs UV-visible photons and sensitizes the Ni center to drive photocatalytic CO₂ reduction. FICN-12 can be exfoliated into monolayer and few-layer nanosheets with a "top-down" approach, which exposes more catalytic sites and increases its catalytic activity. As a result, the nanosheets (FICN-12-MONs) showed photocatalytic CO and CH₄ production rates of 121.15 and 12.17 μmol/g/h, respectively, nearly 1.4 times higher than those of bulk FICN-12.

One-pot solvothermal synthesis of In-doped amino-functionalized UiO-66 Zr-MOFs with enhanced ligand-to-metal charge transfer for efficient visible-light-driven CO2 reduction

Metal organic frameworks (MOFs) with high porosity and highly tunable physical/chemical properties can serve as heterogeneous catalysts for CO₂ photoreduction, but the application is hindered by the large band gap (E_g) and insufficient ligand-to-metal charge transfer (LMCT). In this study, a simple one-pot solvothermal strategy is proposed to prepare an amino-functionalized MOF (aU(Zr/In)) featuring an amino-functionalizing ligand linker and In-doped Zr-oxo clusters, which enables efficient CO₂ reduction driven with visible light. The amino functionalization leads to a significant reduction of E_g as well as a charge redistribution of the framework, allowing the absorption of visible light and the efficient separation of photogenerated carriers. Furthermore, the incorporation of In not only promotes the LMCT process by creating oxygen vacancies in Zr-oxo clusters, but also greatly lowers the energy barrier of the intermediates for CO₂-to-CO conversion. With the synergistic effects of the amino groups and the In dopants, the optimized aU(Zr/In) exhibits a CO production rate of 37.58 ± 1.06 μmol g^-1 h^-1, outperforming the isostructural University of Oslo-66- and Material of Institute Lavoisier-125-based photocatalysts. Our work demonstrates the potential of modifying MOFs with ligands and heteroatom dopants in metal-oxo clusters for solar energy conversion.

Photocatalysts for a sustainable future: Innovations in large-scale environmental and energy applications

The growing environmental and energy crises have prompted researchers to seek new solutions, including large-scale photocatalytic environmental remediation and the production of solar hydrogen using photocatalytic materials. To achieve this goal, scientists have developed numerous photocatalysts with high efficiency and stability. However, the large-scale application of photocatalytic systems under real-world conditions is still limited. These limitations arise at every step, including the large-scale synthesis and deposition of photocatalyst particles on a solid support, and the development of an optimal design with high mass transfer and efficient photon absorption. The purpose of this article is to provide a detailed description of the primary challenges and potential solutions encountered in scaling up photocatalytic systems for use in large-scale water and air purification and solar hydrogen production. Additionally, based on a review of current pilot developments, we draw conclusions and make comparisons regarding the main operating parameters that affect performance, as well as propose strategies for future research.

Ingenious Artificial Leaf Based on Covalent Organic Framework Membranes for Boosting CO2 Photoreduction

Covalent organic frameworks (COFs) hold the potential in converting CO₂ with water into value-added fuels and O₂ to save the deteriorating ecological environment. However, reaching high yield and selectivity is a grand challenge under metal-, photosensitizer-, or sacrificial reagent-free conditions. Here, inspired by microstructures of natural leaves, we designed triazine-based COF membranes with the integration of steady light-harvesting sites, efficient catalytic center, and fast charge/mass transfer configuration to fabricate a novel artificial leaf for the first time. Significantly, a record high CO yield of 1240 μmol g^-1 in a 4 h reaction, approximately 100% selectivity, and a long lifespan (at least 16 cycles) were achieved under gas-solid conditions without using any metal, photosensitizer, or sacrificial reagent. Unlike the existing knowledge, the chemical structural unit of triazine-imide-triazine and the unique physical form of the COF membrane are predominant for such a remarkable photocatalysis. This work opens a new pathway to simulating photosynthesis in leaves and may motivate relevant research in the future.

A CuI Cluster-Based Covalent Metal-Organic Framework as a Photocatalyst for Efficient Visible-Light-Driven Reduction of CO2

The application of solar energy to convert CO₂ into high-value chemicals and fuels has been considered a highly desirable approach to relieving the greenhouse effect and energy crisis. However, the exploration of appropriate photocatalysts remains a major challenge. Combining the respective advantages of covalent organic frameworks and metal-organic frameworks to construct covalent metal-organic frameworks (CMOFs) can be a valid strategy to provide efficient, reliable, and eco-friendly photocatalysts. In this study, a Cu^I cluster-based CMOF (JNM-2) is used as a photocatalyst for CO₂ photoreduction under visible-light irradiation. JNM-2 exhibits remarkable efficiency in photocatalytic CO₂ reduction with high production rates of HCOOH (9019 μmol g^-1  h^-1 ) and CO (835 μmol g^-1  h^-1 ). The active center, reaction intermediates, and product generation pathways are elucidated by in situ DRIFTS and DFT calculations. This work demonstrates the tremendous possibilities of CMOFs as photocatalysts for CO₂ reduction and provides profound insights into the mechanism of CO₂ conversion into HCOOH/CO by using a molecularly accurate structural model.

Nickel-Laden Dendritic Plasmonic Colloidosomes of Black Gold: Forced Plasmon Mediated Photocatalytic CO2 Hydrogenation

In this work, we have designed and synthesized nickel-laden dendritic plasmonic colloidosomes of Au (black gold-Ni). The photocatalytic CO₂ hydrogenation activities of black gold-Ni increased dramatically to the extent that measurable photoactivity was only observed with the black gold-Ni catalyst, with a very high photocatalytic CO production rate (2464 ± 40 mmol g_Ni^-1 h^-1) and 95% selectivity. Notably, the reaction was carried out in a flow reactor at low temperature and atmospheric pressure without external heating. The catalyst was stable for at least 100 h. Ultrafast transient absorption spectroscopy studies indicated indirect hot-electron transfer from the black gold to Ni in less than 100 fs, corroborated by a reduction in Au-plasmon electron-phonon lifetime and a bleach signal associated with Ni d-band filling. Photocatalytic reaction rates on excited black gold-Ni showed a superlinear power law dependence on the light intensity, with a power law exponent of 5.6, while photocatalytic quantum efficiencies increased with an increase in light intensity and reaction temperature, which indicated the hot-electron-mediated mechanism. The kinetic isotope effect (KIE) in light (1.91) was higher than that in the dark (∼1), which further indicated the electron-driven plasmonic CO₂ hydrogenation. Black gold-Ni catalyzed CO₂ hydrogenation in the presence of an electron-accepting molecule, methyl-p-benzoquinone, reduced the CO production rate, asserting the hot-electron-mediated mechanism. Operando diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) showed that CO₂ hydrogenation took place by a direct dissociation path via linearly bonded Ni-CO intermediates. The outstanding catalytic performance of black gold-Ni may provide a way to develop plasmonic catalysts for CO₂ reduction and other catalytic processes using black gold.

Integrated Micro Space Electrostatic Field in Aqueous Zn-Ion Battery: Scalable Electrospray Fabrication of Porous Crystalline Anode Coating

The inhomogeneous consumption of anions and direct contact between electrolyte and anode during the Zn-deposition process generate Zn-dendrites and side reactions that can aggravate the space-charge effect to hinder the practical implementation of zinc-metal batteries (ZMBs). Herein, electrospray has been applied for the scalable fabrication (>10 000 cm² in a batch-experiment) of hetero-metallic cluster covalent-organic-frameworks (MCOF-Ti₆ Cu₃ ) nanosheet-coating (MNC) with integrated micro space electrostatic field for ZMBs anode protection. The MNC@Zn symmetric cell presents ultralow overpotential (≈72.8 mV) over 10 000 cycles at 1 mAh cm^-2 with 20 mA cm^-2 , which is superior to bare Zn and state-of-the-art porous crystalline materials. Theoretical calculations reveal that MNC with integrated micro space electrostatic field can facilitate the deposition-kinetic and homogenize the electric field of anode to significantly promote the lifespan of ZMBs.

Tuning excited state electronic structure and charge transport in covalent organic frameworks for enhanced photocatalytic performance

Covalent organic frameworks (COFs) represent an emerging class of organic photocatalysts. However, their complicated structures lead to indeterminacy about photocatalytic active sites and reaction mechanisms. Herein, we use reticular chemistry to construct a family of isoreticular crystalline hydrazide-based COF photocatalysts, with the optoelectronic properties and local pore characteristics of the COFs modulated using different linkers. The excited state electronic distribution and transport pathways in the COFs are probed using a host of experimental methods and theoretical calculations at a molecular level. One of our developed COFs (denoted as COF-4) exhibits a remarkable excited state electron utilization efficiency and charge transfer properties, achieving a record-high photocatalytic uranium extraction performance of ~6.84 mg/g/day in natural seawater among all techniques reported so far. This study brings a new understanding about the operation of COF-based photocatalysts, guiding the design of improved COF photocatalysts for many applications.

Tuning excited state electronic structure and charge transport in covalent organic frameworks for enhanced photocatalytic performance

Covalent organic frameworks (COFs) represent an emerging class of organic photocatalysts. However, their complicated structures lead to indeterminacy about photocatalytic active sites and reaction mechanisms. Herein, we use reticular chemistry to construct a family of isoreticular crystalline hydrazide-based COF photocatalysts, with the optoelectronic properties and local pore characteristics of the COFs modulated using different linkers. The excited state electronic distribution and transport pathways in the COFs are probed using a host of experimental methods and theoretical calculations at a molecular level. One of our developed COFs (denoted as COF-4) exhibits a remarkable excited state electron utilization efficiency and charge transfer properties, achieving a record-high photocatalytic uranium extraction performance of ~6.84 mg/g/day in natural seawater among all techniques reported so far. This study brings a new understanding about the operation of COF-based photocatalysts, guiding the design of improved COF photocatalysts for many applications.

Activation of CO2 by Direct Cleavage Triggered by Photoelectrons on Rutile TiO2(110)

The initial activation of the inert CO₂ is a key step in its photoreduction to valuable chemicals. This process was proposed to proceed mainly by CO₂ accepting a photoelectron to form a CO₂^•- radical or by CO₂ accepting two photoelectrons and a proton to form the HCOO^- anion on the prototypical rutile TiO₂(110) surface. Here, we reveal a new mechanism, in which CO₂ is directly cleaved to CO and the adsorbed O^2- anion under the trigger of two photoelectrons, by using density functional theory calculations with the HSE06 hybrid functional. The newly revealed mechanism is more favorable than the two previously proposed pathways. Furthermore, our results show that the deficiency of photoelectrons on the catalyst surface is a potential reason for the current low efficiency of CO₂ photoreduction.

Rational Construction of Metal Organic Framework Hybrid Assemblies for Visible Light-Driven CO2 Conversion

Photocatalytic reduction of CO₂ to value-added chemicals is known to be a promising approach for CO₂ conversion. The design and preparation of ideal photocatalysts for CO₂ conversion are of pivotal significance for the sustainable development of the whole society. In this work, we integrated two functional organic linkers to prepare a novel metal organic framework (MOF) photocatalyst {[Co(9,10-bis(4-pyridyl)anthracene)_0.5(bpda)]·4DMF} (Co-MOF). The existence of anthryl and amino groups leads to a wide range of visible light absorption and efficient separation of photogenerated electrons. To extend the lifetime of photogenerated electrons in the photocatalytic system, we modified Co-MOF particles onto g-C₃N₄. As expected, Co-MOF/g-C₃N₄ composites exhibited an ultrahigh selectivity (more than 97%) in the photocatalytic process, and the highest CO production rate (1824 μmol/g/h) was 7.1 and 27.2 times of Co-MOFs and g-C₃N₄, respectively. What's more, we also discussed the reaction mechanism of the Co-MOF/g-C₃N₄ photocatalytic CO₂ reduction, and this work paves the pathway for designing photocatalysts with ideal CO₂ reduction performance.

Functionalized MOF-Based Photocatalysts for CO2 Reduction

Metal-organic frameworks (MOFs) materials have become a research forefront in the field of photocatalytic CO₂ reduction attributed to their ultra-high specific surface area, adjustable structure, and abundant catalytic active sites. Particularly, MOFs can be facilely tuned to match CO₂ photoreduction by utilizing post-modification of metal nodes, functionalization of organic linkers, and combination with other active materials. Herein, the recent advances in the construction strategy of MOF-based photocatalysts materials for CO₂ reduction are highlighted. Some systematic modification strategies on MOF-based photocatalysts are also discussed, such as modification of metal sites and organic ligands, construction of heterojunction, introduction of single/dual-atom, and strain engineering. Finally, the future development directions of MOF-based photocatalysts in the field of CO₂ reduction are presented.

Oxygen vacancies assist a facet effect to modulate the microstructure of TiO2 for efficient photocatalytic O2 activation

Defect engineering is recognized as an effective route to obtaining highly active photocatalytic materials. However, the current understanding of the role of defects in photocatalysts mainly comes from their independent functional analysis, ignoring the synergy between defects and the chemical environment, especially with crystal facets. Herein, oxygen vacancy (V_O)-rich TiO₂ nanostructures with different dominant exposed facets were prepared, and the microstructural changes induced by the synergy between the V_O and facet effect and the performance difference of photocatalytic O₂ activation were explored. The results showed that the combination of high concentration V_O and the {101} facet is more conducive to improving the photocatalytic performance of TiO₂, which is significantly superior to the combination of low concentration V_O and the {101} facet as well as the combination of high concentration V_O and the {001} facet. The experimental and theoretical results clarified the dependence of each stage of photocatalysis on two factors. Specifically, V_O plays a more significant role in energy band regulation, improving the dynamic behavior of photogenerated charges and enhancing the adsorption and activation of O₂, while the facet effect made more contributions to reducing the thermodynamic energy barrier of ROS formation and conversion. The excellent ability of O₂ activation enables T101-V_O to show potential application characteristics in the removal of RhB and bacterial disinfection. This work established a link between defect and facet effects, providing new insights into understanding defect function in photocatalysts.

Metal-Organic Framework-Based Photocatalysis for Solar Fuel Production

Metal-organic frameworks (MOFs) represent a novel class of crystalline inorganic-organic hybrid materials with tunable semiconducting behavior. MOFs have potential for application in photocatalysis to produce sustainable solar fuels, owing to their unique structural advantages (such as clarity and modifiability) that can facilitate a deeper understanding of the structure-activity relationship in photocatalysis. This review takes the photocatalytic active sites as a particular perspective, summarizing the progress of MOF-based photocatalysis for solar fuel production; mainly including three categories of solar-chemical conversions, photocatalytic water splitting to hydrogen fuel, photocatalytic carbon dioxide reduction to hydrocarbon fuels, and photocatalytic nitrogen fixation to high-energy fuel carriers such as ammonia. This review focuses on the types of active sites in MOF-based photocatalysts and discusses their enhanced activity based on the well-defined structure of MOFs, offering deep insights into MOF-based photocatalysis.

Mo2TiC2 MXene-Supported Ru Clusters for Efficient Photothermal Reverse Water-Gas Shift

Driving metal-cluster-catalyzed high-temperature chemical reactions by sunlight holds promise for the development of negative-carbon-footprint industrial catalysis, which has yet often been hindered by the poor ability of metal clusters to harvest and utilize the full spectrum of solar energy. Here, we report the preparation of Mo2TiC2 MXene-supported Ru clusters (Ru/Mo2TiC2) with pronounced broadband sunlight absorption ability and high sintering resistance. Under illumination of focused sunlight, Ru/Mo2TiC2 can catalyze the reverse water-gas shift (RWGS) reaction to produce carbon monoxide from the greenhouse gas carbon dioxide and renewable hydrogen with enhanced activity, selectivity, and stability compared to their nanoparticle counterparts. Notably, the CO production rate of MXene-supported Ru clusters reached 4.0 mol·gRu-1·h-1, which is among the best reported so far for photothermal RWGS catalysts. Detailed studies suggest that the production of methane is kinetically inhibited by the rapid desorption of CO from the surface of the Ru clusters.

Monitoring Electron Flow in Nickel Single-Atom Catalysts during Nitrogen Photofixation

An efficient catalytic system for nitrogen (N₂) photofixation generally consists of light-harvesting units, active sites, and an electron-transfer bridge. In order to track photogenerated electron flow between different functional units, it is highly desired to develop in situ characterization techniques with element-specific capability, surface sensitivity, and detection of unoccupied states. In this work, we developed in situ synchrotron radiation soft X-ray absorption spectroscopy (in situ sXAS) to probe the variation of electronic structure for a reaction system during N₂ photoreduction. Nickel single-atom and ceria nanoparticle comodified reduced graphene oxide (CeO₂/Ni-G) was designed as a model catalyst. In situ sXAS directly reveals the dynamic interfacial charge transfer of photogenerated electrons under illumination and the consequent charge accumulation at the catalytic active sites for N₂ activation. This work provides a powerful tool to monitor the electronic structure evolution of active sites under reaction conditions for photocatalysis and beyond.

Quantum Dot-Based Micromotors with NIR-I Light Photocatalytic Propulsion and NIR-II Fluorescence

Here, we report the first PbS quantum dot (QD)-based micromotors with NIR-I light-driven photocatalytic propulsion and NIR-II fluorescence. Under the irradiation of NIR-I light (808 nm), PbS QD-doped cuprous oxide (Cu₂O@PbS) micromotors can display efficient propulsion in a variety of biocompatible fuels such as malic acid, glucose, and urea. Among them, the Cu₂O@PbS micromotors exhibit the best propulsion performance in a very low concentration of malic acid, with an average speed as high as 11.86 μm/s. The enhanced NIR-I photocatalytic activity of Cu₂O@PbS micromotors benefits from the doping of NIR-I PbS QDs that can be excited by NIR-I light and exhibit high electron transport efficiency. The doped PbS QDs can effectively increase the absorption efficiency of the micromotors in the NIR-I region while also inhibiting the recombination of photogenerated electron-hole pairs. Interestingly, due to the presence of NIR PbS QDs, the Cu₂O@PbS micromotors demonstrate prominent and stable NIR-II fluorescence (emission wavelength: 1100 nm), which offer promising potential for visualization of their position in vivo. In comparison to other photocatalytic micromotors, the simple fabrication strategy, excellent NIR-II fluorescence, together with the NIR-I light-dependent propulsion behavior of the current Cu₂O@PbS micromotors, thus pave the way for further development of advanced smart "robots" for intelligent biomedical applications.

Recent advances in high-crystalline conjugated organic polymeric materials for photocatalytic CO2 conversion

The photocatalytic conversion of carbon dioxide (CO₂) to high-value-added fuels is a meaningful strategy to achieve carbon neutrality and alleviate the energy crisis. However, the low efficiency, poor selectivity, and insufficient product variety greatly limit its practical applications. In this regard, conjugated organic polymeric materials including carbon nitride (g-C₃N₄), covalent organic frameworks (COFs), and covalent triazine frameworks (CTFs) exhibit enormous potential owing to their structural diversity and functional tunability. Nevertheless, their catalytic activities are largely suppressed by the traditional amorphous or weakly crystalline structures. Therefore, constructing relevant high-crystalline materials to ameliorate their inherent drawbacks is an efficient strategy to enhance the photocatalytic performance of conjugated organic polymeric materials. In this review, the advantages of high-crystalline organic polymeric materials including reducing the concentration of defects, enhancing the built-in electric field, reducing the interlayer hydrogen bonding, and crystal plane regulation are highlighted. Furthermore, the strategies for their synthesis such as molten-salt, solid salt template, and microwave-assisted methods are comprehensively summarized, while the modification strategies including defect engineering, element doping, surface loading, and heterojunction construction are elaborated for enhancing their photocatalytic activities. Ultimately, the challenges and opportunities of high-crystalline conjugated organic polymeric materials in photocatalytic CO₂ conversion are prospected to give some inspiration and guidance for researchers.