Nanofibrous asymmetric collagen/curcumin membrane containing aspirin-loaded PLGA nanoparticles for guided bone regeneration

Antibiotic-Loaded Polymeric Barrier Membranes for Guided Bone/Tissue Regeneration: A Mini-Review

Polymeric membranes are frequently used for bone regeneration in oral and periodontal surgery. Polymers provide adequate mechanical properties (i.e., Young’s modulus) to support oral function and also pose some porosity with interconnectivity to permit for cell proliferation and migration. Bacterial contamination of the membrane is an event that may lead to infection at the bone site, hindering the clinical outcomes of the regeneration procedure. Therefore, polymeric membranes have been proposed as carriers for local antibiotic therapy. A literature search was performed for papers, including peer-reviewed publications. Among the different membranes, collagen is the most employed biomaterial. Collagen membranes and expanded polytetrafluoroethylene loaded with tetracyclines, and polycaprolactone with metronidazole are the combinations that have been assayed the most. Antibiotic liberation is produced in two phases. A first burst release is sometimes followed by a sustained liberation lasting from 7 to 28 days. All tested combinations of membranes and antibiotics provoke an antibacterial effect, but most of the time, they were measured against single bacteria cultures and usually non-specific pathogenic bacteria were employed, limiting the clinical relevance of the attained results. The majority of the studies on animal models state a beneficial effect of these antibiotic functionalized membranes, but human clinical assays are scarce and controversial.

Traditional Chinese Medicine Compound-Loaded Materials in Bone Regeneration

Bone is a dynamic organ that has the ability to repair minor injuries via regeneration. However, large bone defects with limited regeneration are debilitating conditions in patients and cause a substantial clinical burden. Bone tissue engineering (BTE) is an alternative method that mainly involves three factors: scaffolds, biologically active factors, and cells with osteogenic potential. However, active factors such as bone morphogenetic protein-2 (BMP-2) are costly and show an unstable release. Previous studies have shown that compounds of traditional Chinese medicines (TCMs) can effectively promote regeneration of bone defects when administered locally and systemically. However, due to the low bioavailability of these compounds, many recent studies have combined TCM compounds with materials to enhance drug bioavailability and bone regeneration. Hence, the article comprehensively reviewed the local application of TCM compounds to the materials in the bone regeneration in vitro and in vivo. The compounds included icariin, naringin, quercetin, curcumin, berberine, resveratrol, ginsenosides, and salvianolic acids. These findings will contribute to the potential use of TCM compound-loaded materials in BTE.

Curcumin nanoformulations: Beneficial nanomedicine against cancer

Curcumin is a phytochemical achieved from the plant turmeric. It is extensively utilized for the treatment of several types of diseases such as cancers. Nevertheless, its efficiency has been limited because of rapid metabolism, low bioavailability, poor water solubility, and systemic elimination. Scientists have tried to solve these problems by exploring novel drug delivery systems such as lipid-based nanoparticles (NPs) (e.g., solid lipid NPs, nanostructured lipid carriers, and liposomes), polymeric NPs, micelles, nanogels, cyclodextrin, gold, and mesoporous silica NPs. Among these, liposomes have been the most expansively studied. This review mainly focuses on the different curcumin nanoformulations and their use in cancer therapy in vitro, in vivo, and clinical studies. Despite the development of curcumin-containing NPs for the treatment of cancer, potentially serious side effects, including interactions with other drugs, some toxicity aspects of NPs may occur that require more high-quality investigations to firmly establish the clinical efficacy.

Preparation, Physicochemical Assessment and the Antimicrobial Action of Hydroxyapatite-Gelatin/Curcumin Nanofibrous Composites as a Dental Biomaterial

In this study, we prepared and evaluated hydroxyapatite-gelatin/curcumin nanofibrous composites and determined their antimicrobial effects against Escherichia coli, Staphylococcus aureus, and Streptococcus mutans. Hydroxyapatite-gelatin/curcumin nanofibrous composites were prepared by the electrospinning method. The prepared nanocomposites were then subjected to physicochemical studies by the light scattering method for their particle size, Fourier transmission infrared spectroscopy (FTIR) to identify their functional groups, X-ray diffraction (XRD) to study their crystallinity, and scanning electron microscopy (SEM) to study their morphology. For the microbial evaluation of nanocomposites, the disk diffusion method was used against Streptococcus mutans, Staphylococcus aureus, and Escherichia coli. The results showed that the nanofibers were uniform in shape without any bead (structural defects). The release pattern of curcumin from the nanocomposite was a two-stage release, 60% of which was released in the first two days and the rest being slowly released until the 14th day. The results of the microbial evaluations showed that the nanocomposites had significant antimicrobial effects against all bacteria (p = 0.0086). It seems that these nanocomposites can be used in dental tissue engineering or as other dental materials. Also, according to the appropriate microbial results, these plant antimicrobials can be used instead of chemical antimicrobials, or along with them, to reduce bacterial resistance.

Application of collagen and mesenchymal stem cells in regenerative dentistry

Collagen is an important macromolecule of extracellular matrix (ECM) in bones, teeth, and temporomandibular joints. Mesenchymal stem cells (MSCs) interact with the components of the ECM such as collagen, proteoglycans, glycosaminoglycans (GAGs), and several proteins on behalf of variable matrix elasticity and bioactive cues. Synthetic collagen-based biomaterials could be effective scaffolds for regenerative dentistry applications due to mimicking of host tissues' ECM. These biomaterials are biocompatible, biodegradable, readily available, and non-toxic to cells whose capability promotes cellular response and wound healing in the craniofacial region. Collagen could incorporate other biomolecules to induce mineralization in calcified tissues such as bone and tooth. Moreover, the addition of these molecules or other polymers to collagen-based biomaterials could enhance mechanical properties, which is important in load-bearing areas such as the mandible. A literature review was performed via reliable internet database (mainly PubMed) based on MeSH keywords. This review first describes the properties of collagen as a key protein in the structure of hard tissues. Then, it introduces different types of collagens, the correlation between collagen and MSCs, and the methods used to modify collagen in regenerative dentistry including recent progression on the regeneration of periodontium, dentin-pulp complex, and temporomandibular joint by applying collagen. Besides, the prospects and challenges of collagen-based biomaterials in the craniofacial region pointes out.

Periodontal Bifunctional Biomaterials: Progress and Perspectives

Periodontitis is a chronic infectious disease that destroys periodontal supportive tissues and eventually causes tooth loss. It is attributed to microbial and immune factors. The goal of periodontal therapy is to achieve complete alveolar bone regeneration while keeping inflammation well-controlled. To reach this goal, many single or composite biomaterials that produce antibacterial and osteogenic effects on periodontal tissues have been developed, which are called bifunctional biomaterials. In this review, we summarize recent progress in periodontal bifunctional biomaterials including bioactive agents, guided tissue regeneration/guided bone regeneration (GTR/GBR) membranes, tissue engineering scaffolds and drug delivery systems and provide novel perspectives. In conclusion, composite biomaterials have been greatly developed and they should be chosen with care due to the risk of selection bias and the lack of evaluation of the validity of the included studies.

The Effects of Curcumin Nanoparticles Incorporated into Collagen-Alginate Scaffold on Wound Healing of Skin Tissue in Trauma Patients

Wound healing is a biological process that is mainly crucial for the rehabilitation of injured tissue. The incorporation of curcumin (Cur) into a hydrogel system is used to treat skin wounds in different diseases due to its hydrophobic character. In this study, sodium alginate and collagen, which possess hydrophilic, low toxic, and biocompatible properties, were utilized. Collagen/alginate scaffolds were synthesized, and nanocurcumin was incorporated inside them; their interaction was evaluated by FTIR spectroscopy. Morphological studies investigated structures of the samples studied by FE-SEM. The release profile of curcumin was detected, and the cytotoxic test was determined on the L929 cell line using an MTT assay. Analysis of tissue wound healing was performed by H&E staining. Nanocurcumin was spherical, its average particle size was 45 nm, and the structure of COL/ALG scaffold was visible. The cell viability of samples was recorded in cells after 24 h incubation. Results of in vivo wound healing remarkably showed CUR-COL/ALG scaffold at about 90% (p < 0.001), which is better than that of COL/ALG, 80% (p < 0.001), and the control 73.4% (p < 0.01) groups at 14 days/ The results of the samples’ FTIR indicated that nanocurcumin was well-entrapped into the scaffold, which led to improving the wound-healing process. Our results revealed the potential of nanocurcumin incorporated in COL/ALG scaffolds for the wound healing of skin tissue in trauma patients.

Development and biocompatibility of the injectable collagen/nano-hydroxyapatite scaffolds as in situ forming hydrogel for the hard tissue engineering application

Injectable hydrogels attract more attention to hard tissue engineering for the fulfilment of the defects with irregular shapes. Therefore, the researchers investigated the biocompatibility and immune response to the injectable PCL-PEG-PCL-Col/nHA hydrogels in a mouse model. The histological examination was done via H&E. The activation of the immune cells was evaluated by using antibodies against the CD68, CD4, and CD8 markers. The expression of CCL-2, BCL-2, IL-10, and CD31 genes was measured. Moreover, serum levels of the ALT, ALP, AST, and Urea were detected. The results of the chemical analysis showed that the collagen and Nano-hydroxyapatite were successfully integrated into the PCL-PEG-PCL hydrogels. The histological examination revealed a delayed biodegradation rate after the addition of the collagen and Nano-hydroxyapatite. No prominent pro-inflammatory response was found at the site of the injection. There are no significant differences in the levels of the CD68 and CD8/CD4 lymphocyte ratio among groups (p > .05). The expression of the CD31, IL-10 was significantly increased in the PCL-PEG-PCL-Col/nHA hydrogel (p < .05). ALT, ALP, AST, and Urea levels were not altered pre- and post-transplantation of the hydrogels (p > .05). These in vivo results demonstrated that the injectable PCL-PEG-PCL-Col/nHA hydrogels are biocompatible and suitable for further research in hard tissue regeneration.

Nanomedicine and Periodontal Regenerative Treatment

Current periodontal treatments aim to control bacterial infection and decrease inflammation. To optimize contemporary conventional treatments that present limitations owing to an inability to reach the lesion site, new methods are based on nanomedicine. Nanomedecine allows delivery of host-modulatory drugs or antibacterial molecules at the lesion site in an optimal concentration with decreased toxicity and risk of systemic side effects. Chitosan and polylactic-co-glycolic acid-loaded nanoparticles, carbon quantum dots, and mesoporous silicates open new perspectives in periodontitis management. The potential therapeutic impact of the main nanocarriers is discussed.

Mechanism of miR-30b-5p-Loaded PEG-PLGA Nanoparticles for Targeted Treatment of Heart Failure

Objective: Exploring the effectiveness of miR-30b-5p-loaded PEG-PLGA nanoparticles (NPs) for the treatment of heart failure and the underlying mechanism.

Methods: PEG-PLGA characteristics with different loading amounts were first examined to determine the loading, encapsulation, and release of miR-30b-5p from NPs. The effects of miR-30b-5p NPs on cardiac function and structure were assessed by immunofluorescence, echocardiography, HE/Masson staining, and TUNEL staining. The effects of NPs on the expression of factors related to cardiac hypertrophy and inflammation were examined by RT-PCR and western blotting, and the mechanism of miR-30b-5p treatment on heart failure was explored by dual luciferase reporter assay and RT-PCR.

Results: The size of PEG-PLGA NPs with different loading amounts ranged from 200 to 300 nm, and the zeta potential of PEG-PLGA NPs was negative. The mean entrapment efficiency of the NPs for miR-30b-5p was high (81.8 ± 2.1%), and the release rate reached 5 days with more than 90% release. Distribution experiments showed that NPs were mainly distributed in the heart and had a protective effect on myocardial injury and cardiac function. Compared with a rat model of cardiac failure and miR-30b-5p-non-loaede NP groups, the expression of cardiac hypertrophy markers (ANP, BNPβ-MHC) and inflammatory factors (IL-1β, IL-6) were significantly decreased. Dual luciferase reporter assay assays indicated that miR-30b-5p exerted its effects mainly by targeting TGFBR2.

Conclusion: PEG-PLGA NPs loaded with miR-30b-5p improved cardiac function, attenuated myocardial injury, and regulated the expression of factors associated with cardiac hypertrophy and inflammation by targeting TGFBR2.

The Antimicrobial, Antioxidative, and Anti-Inflammatory Effects of Polycaprolactone/Gelatin Scaffolds Containing Chrysin for Regenerative Endodontic Purposes

The appropriate endodontic material should eliminate the infection and inflammation to provide a situation for regeneration and healing of pulp tissue besides biomineralization. Chrysin is one of the active ingredients of plant flavonoids, which has significant anti-inflammatory and antimicrobial properties. In the present study, this natural substance was evaluated for antioxidant, anti-inflammatory, and mineralization properties on dental pulp stem cells (DPSCs). SEM, FTIR, and TGA tests were used to determine the successful synthesize of chrysin-loaded scaffolds. The antimicrobial effects of the synthesized scaffold against Acinetobacter baumannii, Pseudomonas aeruginosa, Staphylococcus aureus, and Enterococcus faecalis were assessed by the agar diffusion test and live/dead assay. The proliferation of DPSCs on these scaffolds was determined by the MTT assay, DAPI staining, and DNA extraction. Moreover, the antioxidant and anti-inflammation activity of chrysin-loaded scaffolds on inflamed DPSCs was evaluated. Alkaline phosphatase activity and Alizarin Red S Stain tests were done to evaluate the mineralization of DPSCs seeded on these scaffolds. The chrysin-loaded scaffolds reported antimicrobial effects against evaluated bacterial strains. The proliferation of DPSCs seeded on these scaffolds was increased significantly (p < 0.05). The TNFα and DCF levels in inflamed DPSCs showed a significant decrease in the presence of chrysin-loaded scaffolds (p < 0.05). The ALP activity and formation of mineralized nodules of DPSCs on these scaffolds were significantly increased compared with the control group (p < 0.05). These results indicated that chrysin as an ancient therapeutic agent can accelerate the healing and regeneration of damaged pulp tissue, and this active ingredient can be a potential natural substance for regenerative endodontic procedures.

Use of 3D Printing for the Development of Biodegradable Antiplatelet Materials for Cardiovascular Applications

Small-diameter synthetic vascular grafts are required for surgical bypass grafting when there is a lack of suitable autologous vessels due to different reasons, such as previous operations. Thrombosis is the main cause of failure of small-diameter synthetic vascular grafts when used for this revascularization technique. Therefore, the development of biodegradable vascular grafts capable of providing a localized and sustained antithrombotic drug release mark a major step forward in the fight against cardiovascular diseases, which are the leading cause of death globally. The present paper describes the use of an extrusion-based 3D printing technology for the production of biodegradable antiplatelet tubular grafts for cardiovascular applications. For this purpose, acetylsalicylic acid (ASA) was chosen as a model molecule due to its antiplatelet activity. Poly(caprolactone) and ASA were combined for the fabrication and characterization of ASA-loaded tubular grafts. Moreover, rifampicin (RIF) was added to the formulation containing the higher ASA loading, as a model molecule that can be used to prevent vascular prosthesis infections. The produced tubular grafts were fully characterized through multiple techniques and the last step was to evaluate their drug release, antiplatelet and antimicrobial activity and cytocompatibility. The results suggested that these materials were capable of providing a sustained ASA release for periods of up to 2 weeks. Tubular grafts containing 10% (w/w) of ASA showed lower platelet adhesion onto the surface than the blank and grafts containing 5% (w/w) of ASA. Moreover, tubular grafts scaffolds containing 1% (w/w) of RIF were capable of inhibiting the growth of Staphylococcus aureus. Finally, the evaluation of the cytocompatibility of the scaffold samples revealed that the incorporation of ASA or RIF into the composition did not compromise cell viability and proliferation at short incubation periods (24 h).

Synthesis, characterization, and evaluation of curcumin-loaded endodontic reparative material

Curcumin (CUR) is an ancient therapeutic agent with remarkable antimicrobial and anti-inflammatory properties. The purpose of the current study was to synthesize and evaluate a curcumin-based reparative endodontic material to reduce infection and inflammation besides the induction of mineralization during the healing of the dentin-pulp complex. Poly-ɛ-caprolactone (PCL)/gelatin (Gel)/CUR scaffold was synthesized and assessed by scanning electron microscopy, Fourier transform infrared spectroscopy, and thermo-gravimetric analysis (TGA). Agar diffusion test was performed against E. coli, A. baumannii, P. aeruginosa, S. aureus, E. faecalis, and S. mutans. Moreover, proliferative, antioxidative, anti-inflammatory, and calcification properties of these scaffolds on human dental pulp stem cells (hDPSCs) were evaluated. The results showed that PCL/Gel/CUR scaffold had antibacterial effects. Also, these CUR-based scaffolds had significant inhibitory effects on the expression of tumor necrosis factor α and DCF from inflamed hDPSCs (p < 0.05). Moreover, the induction of mineralization in hDPSCs significantly increased after seeding on CUR-based scaffolds (p < 0.05). Based on these findings, the investigated CUR-loaded material was fabricated successfully and provided an appropriate structure for the attachment and proliferation of hDPSCs. It was found that these scaffolds had antimicrobial, antioxidant, and anti-inflammatory characteristics and could induce mineralization in hDPSCs, which is essential for healing and repairing the injured dentin-pulp complex.

Osteogenic Differentiation of Mesenchymal Stem Cells via Curcumin-Containing Nanoscaffolds

The diverse pleiotropic pharmacological effects of curcumin nanoformulations have turned it into an attractive natural compound in different health-related problems. A great body of evidence has shown the impact of curcumin and its nanoformulations on the differentiation of stem cells. The current review highlights cellular and molecular mechanisms connected with the osteogenic differentiation of mesenchymal stem cells (MSCs) in the scaffolds benefiting from the presence of nanocurcumin pointing toward the role of inhibitory or stimulant signal transduction pathways in detail. Moreover, the effects of different concentrations as well as the structural modifications of curcumin on the differentiation of MSCs have been addressed.

Pharmaceutical electrospinning and 3D printing scaffold design for bone regeneration

Bone regenerative engineering provides a great platform for bone tissue regeneration covering cells, growth factors and other dynamic forces for fabricating scaffolds. Diversified biomaterials and their fabrication methods have emerged for fabricating patient specific bioactive scaffolds with controlled microstructures for bridging complex bone defects. The goal of this review is to summarize the points of scaffold design as well as applications for bone regeneration based on both electrospinning and 3D bioprinting. It first briefly introduces biological characteristics of bone regeneration and summarizes the applications of different types of material and the considerations for bone regeneration including polymers, ceramics, metals and composites. We then discuss electrospinning nanofibrous scaffold applied for the bone regenerative engineering with various properties, components and structures. Meanwhile, diverse design in the 3D bioprinting scaffolds for osteogenesis especially in the role of drug and bioactive factors delivery are assembled. Finally, we discuss challenges and future prospects in the development of electrospinning and 3D bioprinting for osteogenesis and prominent strategies and directions in future.

Curcumin: A review of experimental studies and mechanisms related to periodontitis treatment

Curcumin is the main active ingredient of turmeric, which has a wide range of pharmacological effects, including antitumor, antibacterial, anti-inflammatory, anti-oxidation, immune regulation, and so on. Periodontitis is a prevalent oral inflammatory disease caused by a variety of factors. In recent years, many studies have shown that curcumin has a potential role on the treatment of periodontitis. Curcumin has been used in research related to the treatment of periodontitis in the form of solution, chip, gel, and capsule. Combined with other periodontitis treatment methods, such as scaling and root planing (SRP) and photodynamic therapy (PDT), can enhance curcumin's efficacy in treating periodontitis. In addition to natural curcumin, chemically modified curcumin, such as 4-phenylaminocarbonyl bis-demethoxy curcumin (CMC 2.24) and 4-methoxycarbonyl curcumin (CMC 2.5), have also been used in animal models of periodontitis. Here, this paper reviews the research progress of curcumin on the treatment of periodontitis and its related mechanisms.

Dental-Derived Mesenchymal Stem Cells: State of the Art

Mesenchymal stem cells (MSCs) could be identified in mammalian teeth. Currently, dental-derived MSCs (DMSCs) has become a collective term for all the MSCs isolated from dental pulp, periodontal ligament, dental follicle, apical papilla, and even gingiva. These DMSCs possess similar multipotent potential as bone marrow-derived MSCs, including differentiation into cells that have the characteristics of odontoblasts, cementoblasts, osteoblasts, chondrocytes, myocytes, epithelial cells, neural cells, hepatocytes, and adipocytes. Besides, DMSCs also have powerful immunomodulatory functions, which enable them to orchestrate the surrounding immune microenvironment. These properties enable DMSCs to have a promising approach in injury repair, tissue regeneration, and treatment of various diseases. This review outlines the most recent advances in DMSCs' functions and applications and enlightens how these advances are paving the path for DMSC-based therapies.

Application of Advanced Nanomaterials for Kidney Failure Treatment and Regeneration

The implementation of nanomedicine not only provides enhanced drug solubility and reduced off-target adverse effects, but also offers novel theranostic approaches in clinical practice. The increasing number of studies on the application of nanomaterials in kidney therapies has provided hope in a more efficient strategy for the treatment of renal diseases. The combination of biotechnology, material science and nanotechnology has rapidly gained momentum in the realm of therapeutic medicine. The establishment of the bedrock of this emerging field has been initiated and an exponential progress is observed which might significantly improve the quality of human life. In this context, several approaches based on nanomaterials have been applied in the treatment and regeneration of renal tissue. The presented review article in detail describes novel strategies for renal failure treatment with the use of various nanomaterials (including carbon nanotubes, nanofibrous membranes), mesenchymal stem cells-derived nanovesicles, and nanomaterial-based adsorbents and membranes that are used in wearable blood purification systems and synthetic kidneys.

Early Osteogenic Differentiation Stimulation of Dental Pulp Stem Cells by Calcitriol and Curcumin

Curcumin, as a natural phenolic substance, is extracted from the rhizome of Curcuma longa (turmeric), which is effective in bone healthfulness. Calcitriol is an effective hormone in regulating bone remodeling and mineral homeostasis and immune response. Mesenchymal stem cells (MSCs) are found in most dental tissues and resemble bone marrow-derived MSCs. In this work, we investigated the effect of combination and individual treatment of curcumin and calcitriol on early osteogenic differentiation of dental pulp stem cells (DPSCs). Early osteogenic differentiation was evaluated and confirmed by the gene expression level of ALP and its activity. Curcumin individually and in combination with calcitriol increased ALP activity and osteoblast-specific mRNA expression of ALP when DPSCs were cultured in an osteogenic medium. Calcitriol alone increased the enzyme more than in combination with curcumin. These findings demonstrate that curcumin can induce early osteogenic differentiation of DPSCs like calcitriol as a potent stimulant of osteogenesis.

Modulating Mechanical and Shape-Memory Properties while Mitigating Degradation-Induced Inflammation of Polylactides by Pendant Aspirin Incorporation

Synergistically modulating mechanical properties and improving shape-memory performance while mitigating degradation-induced chronic inflammation of polylactide (PLA)-based implants for biomedical applications remain elusive. We test the hypothesis that copolymerizing aspirin-functionalized glycolide with d,l-lactide could enhance the thermal processing, toughness, and shape-memory efficiency of the copolymer while mitigating local inflammatory responses upon its degradation. The content of pendant aspirin was readily modulated by monomer feeds during ring-opening polymerization, and the copolymers with ∼10% or less aspirin pendants exhibited gigapascal-tensile moduli at body temperature and significantly improved fracture toughness and energy dissipation that positively correlated with the aspirin pendant content. The copolymers also exhibited excellent thermal-healing and shape-memory efficacy, achieving a >97% temporary shape fixing ratio at room temperature and facile shape recovery at 50-65 °C. These drastic improvements were attributed to the dynamic hydrophobic aggregations among aspirin pendants that strengthen glassy-state physical entanglement of PLA while readily dissociating under stress/thermal activation. When subcutaneously implanted, the copolymers mitigated degradation-induced inflammation due to concomitant hydrolytic release of aspirin without suppressing early acute inflammatory responses. The incorporation of aspirin pendants in PLA represents a straightforward and innovative strategy to enhance the toughness, shape-memory performance, and in vivo safety of this important class of thermoplastics for biomedical applications.

Antibacterial agent-releasing scaffolds in dental tissue engineering

It seems quite challenging in tissue engineering to synthesize a base material with a range of essential activities, including biocompatibility, nontoxicity, and antimicrobial activities. Various types of materials are synthesized to solve the problem. This study aimed to provide the latest relevant information for practitioners about antibacterial scaffolds in dental tissue engineering. The PubMed search engine was used to review the relevant studies with a combination of the following terms as search queries: tissue engineering, scaffolds, antimicrobial, dentistry, dental stem cells, and oral diseases. It is noteworthy to state that only the terms related to tissue engineering in dentistry were considered. The antimicrobial scaffolds support the local tissue regeneration and prevent adverse inflammatory reactions; however, not all scaffolds have such positive characteristics. To resolve this potential defect, different antimicrobial agents are used during the synthesis process. Innovative methods in guided tissue engineering are actively working towards new ways to control oral and periodontal diseases.

Antimicrobial and antibiofilm activities of meropenem loaded-mesoporous silica nanoparticles against carbapenem-resistant Pseudomonas aeruginosa

The aims of the present study were the determination of antimicrobial and antibiofilm effects of meropenem-loaded mesoporous silica nanoparticles (MSNs) on carbapenem resistant Pseudomonas aeruginosa (P. aeruginosa) and cytotoxicity properties in vitro. The meropenem-loaded MSNs had shown antibacterial and biofilm inhibitory activities on all isolates at different levels lower than MICs and BICs of meropenem. The viability of HC-04 cells treated with serial concentrations as MICs and BICs of meropenem-loaded MSNs was 92-100%. According to the obtained results, meropenem-loaded MSNs display the significant antibacterial and antibiofilm effects against carbapenem resistant and biofilm forming P. aeruginosa and low cell toxicity in vitro. Then, the prepared system can be an appropriate option for the delivery of carbapenem for further evaluation in vivo assays.

Osteogenic differentiation system based on biopolymer nanoparticles for stem cells in simulated microgravity

An efficient long-term intracellular growth factor release system in simulated microgravity for osteogenic differentiation was prepared based on polylactic acid (PLA) and polyhydroxyalkanoate (PHA) nanoparticles for loading of bone morphogenetic protein 2 (BMP2) and bone morphogenetic protein 7 (BMP7) (defined as sB2-PLA-NP and sB7-PHA-NP), respectively, associated with osteogenic differentiation of human adipose derived stem cells (hADSCs). On account of soybean lecithin (SL) as biosurfactants, sB2-PLA-NPs and sB7-PHA-NPs had a high encapsulation efficiency (>80%) of BMPs and uniform small size (<100 nm), and showed different slow-release to provide BMP2 in early stage and BMP7 in late stages of osteogenic differentiation within 20 days, due to degradation rate of PLA and PHA in cells. After uptake into hADSCs, by comparison with single sB2-PLA-NP or sB7-PHA-NP, the Mixture NPs, compound of sB2-PLA-NP and sB7-PHA-NP with a mass ratio of 1:1, can well-promote ALP activity, expression of OPN and upregulated related osteo-genes. Directed osteo-differentiation of Mixture NPs was similar to result of sustained free-BMP2 and BMP7-supplying (sFree-B2&B7) in simulated microgravity, which demonstrated the reliability and stability of Mixture NPs as a long-term osteogenic differentiation system in space medicine and biology in future.

Injectable chitosan-quince seed gum hydrogels encapsulated with curcumin loaded-halloysite nanotubes designed for tissue engineering application

The goal of tissue engineering is to assemble functional constructs that restore, maintain, or improve damaged tissues or organs. Hydrogels formed with natural polymers display high potential in artificial scaffolds for tissue repair as they can resemble the extracellular matrices. Thus, the aim of this study was to design nanocomposite hydrogels of chitosan/oxidized-modified quince seed gum/curcumin-loaded in halloysite nanotubes (CS/OX-QSG/CUR-HNTs) for tissue engineering applications. The produced hydrogels were analyzed for thermal stability, degradation, swelling ratio, gelling time and mechanical properties. The results showed that with increasing content of OX-QSG, thermal stability, swelling ratio, and degradation rate of hydrogels were improved. Notably, the optimal CS/OX-QSG hydrogel with ratio of 25:75 exhibited rapid gelation behavior (<50 s) and improved compressive strength (3.96 ± 0.64 MPa), representing the suitable hydrogel for application in tissue engineering. The MTT test showed that these hydrogels were non-toxic and any reduction or stop of NIH-3 T3 cells growth wasn't observed over time. In addition, CS/OX-QSG 25:75 hydrogels containing CUR-HNTs with 10 and 30% content was significantly (P < 0.05) enhanced cell growth and proliferation (around 150%). Obtained results illustrated that CS/OX-QSG hydrogels with ratio of 25:75 and the content of 30% CUR-HNTs can be an effective scaffold for application in tissue engineering.

Inhibitory effects of curcumin against cytotoxicity of Porphyromonas gingivalis outer membrane vesicles

OBJECTIVE

The purpose of this study was to examine whether curcumin, a turmeric root extract, protects human gingival epithelial (HGE) cells from the cytotoxic effects ofPorphyromonas gingivalis outer membrane vesicles (OMVs).

DESIGN

OMVs were prepared fromP. gingivalis OMZ314 and used to stimulate human gingival epithelial (HGE) cells. The effects of curcumin on cellular expression of inflammatory cytokines were evaluated using real-time reverse transcription-polymerase chain reaction assays, while those on cellular migration were examined with a scratch wound assay. Furthermore, HGE cells were incubated with OMVs in the presence or absence of curcumin, then intracellular invasion by OMVs was observed with confocal laser scanning microscopy. Also, the effects of curcumin on cellular apoptotic death was examined.

RESULTS

Gene expressions of IL-6, IL-1β, and TNF-α in HGE cells stimulated with OMVs were significantly suppressed by curcumin in a dose-dependent manner, with suppressed protein production also noted. Moreover, curcumin inhibited the cytotoxic effects of OMVs on cellular migration. Finally, curcumin inhibited OMV adherence to and entry of cells, as well as cellular apoptotic death in a dose-dependent manner.

CONCLUSIONS

Curcumin showed marked inhibitory effects against the cytotoxic actions of P. gingivalis OMVs, indicating possible potency for preventing periodontal disease.

Curcumin Nanocrystals: Production, Physicochemical Assessment, and In Vitro Evaluation of the Antimicrobial Effects against Bacterial Loading of the Implant Fixture

Background: This study aimed to prepare and study physicochemical properties as well as the antibacterial action of curcumin nanocrystals inside the implant fixture against Escherichia coli (E. coli), Staphylococcus aureus (S. aureus), and Enterococcus faecalis (E. faecalis). Methods: Curcumin nanocrystals were prepared via precipitation combined with the spray drying method. The produced curcumin nanocrystals were characterized by dynamic light scattering (DLS), scanning electron microscopy (SEM), powder X-ray diffraction (PXRD), and Fourier transform infrared spectroscopy (FTIR). Moreover, the in vitro antimicrobial effect of curcumin nanocrystals inside the implant fixture was assessed against E. coli, S. aureus, and E. faecalis. All implant-abutment assemblies were immersed in bacterial suspensions and were incubated at 24, 48, and 72 h. The contents of each implant were cultured to count the colony of bacteria at 37 °C for 24 h. Results: The prepared curcumin nanocrystals with a mean particle size of 95 nm and spherical morphology exhibited a removal rate of 99.99% for all bacteria. In addition, the colony-forming unit (CFU) of bacteria in exposure to nanocrystals significantly was reduced (p < 0.010) by increasing the time. Conclusions: Curcumin nanocrystals can be used inside the implant fixture as an antimicrobial agent in order to more stabilization of the implant.