Molybdenum and tungsten enzymes: a crystallographic and mechanistic overview

Perchlorate Reductase Is Distinguished by Active Site Aromatic Gate Residues

Perchlorate is an important ion on both Earth and Mars. Perchlorate reductase (PcrAB), a specialized member of the dimethylsulfoxide reductase superfamily, catalyzes the first step of microbial perchlorate respiration, but little is known about the biochemistry, specificity, structure, and mechanism of PcrAB. Here we characterize the biophysics and phylogeny of this enzyme and report the 1.86-Å resolution PcrAB complex crystal structure. Biochemical analysis revealed a relatively high perchlorate affinity (Km = 6 μm) and a characteristic substrate inhibition compared with the highly similar respiratory nitrate reductase NarGHI, which has a relatively much lower affinity for perchlorate (Km = 1.1 mm) and no substrate inhibition. Structural analysis of oxidized and reduced PcrAB with and without the substrate analog SeO3 (2-) bound to the active site identified key residues in the positively charged and funnel-shaped substrate access tunnel that gated substrate entrance and product release while trapping transiently produced chlorate. The structures suggest gating was associated with shifts of a Phe residue between open and closed conformations plus an Asp residue carboxylate shift between monodentate and bidentate coordination to the active site molybdenum atom. Taken together, structural and mutational analyses of gate residues suggest key roles of these gate residues for substrate entrance and product release. Our combined results provide the first detailed structural insight into the mechanism of biological perchlorate reduction, a critical component of the chlorine redox cycle on Earth.

Synthesis and Reactivity of a Bio-inspired Dithiolene Ligand and its Mo Oxo Complex

An original synthesis of the fused pyranoquinoxaline dithiolene ligand qpdt(2-) is discussed in detail. The most intriguing step is the introduction of the dithiolene moiety by Pd-catalyzed carbon-sulfur coupling. The corresponding Mo(IV)O complex (Bu4N)2 [MoO(qpdt)2] (2) underwent reversible protonation in a strongly acidic medium and remained stable under anaerobic conditions. Besides, 2 was found to be very sensitive towards oxygen, as upon oxidation it formed a planar dithiin derivative. Moreover, the qpdt(2-) ligand in the presence of [MoCl4 (tBuNC)2] formed a tetracyclic structure. The products resulting from the unique reactivity of qpdt(2-) were characterized by X-ray diffraction, mass spectrometry, NMR spectroscopy, UV/Vis spectroscopy, and electrochemistry. Plausible mechanisms for the formation of these products are also proposed.

A Model for the Active-Site Formation Process in DMSO Reductase Family Molybdenum Enzymes Involving Oxido-Alcoholato and Oxido-Thiolato Molybdenum(VI) Core Structures

New bis(ene-1,2-dithiolato)-oxido-alcoholato molybdenum(VI) and -oxido-thiolato molybdenum(VI) anionic complexes, denoted as [Mo(VI)O(ER)L2](-) (E = O, S; L = dimethoxycarboxylate-1,2-ethylenedithiolate), were obtained from the reaction of the corresponding dioxido-molybdenum(VI) precursor complex with either an alcohol or a thiol in the presence of an organic acid (e.g., 10-camphorsulfonic acid) at low temperature. The [Mo(VI)O(ER)L2](-) complexes were isolated and characterized, and the structure of [Mo(VI)O(OEt)L2](-) was determined by X-ray crystallography. The Mo(VI) center in [Mo(VI)O(OEt)L2](-) exhibits a distorted octahedral geometry with the two ene-1,2-dithiolate ligands being symmetry inequivalent. The computed structure of [Mo(VI)O(SR)L2](-) is essentially identical to that of [Mo(VI)O(OR)L2](-). The electronic structures of the resulting molybdenum(VI) complexes were evaluated using electronic absorption spectroscopy and bonding calculations. The nature of the distorted O(h) geometry in these [Mo(VI)O(EEt)L2](-) complexes results in a lowest unoccupied molecular orbital wave function that possesses strong π* interactions between the Mo(d(xy)) orbital and the cis S(p(z)) orbital localized on one sulfur donor from a single ene-1,2-dithiolate ligand. The presence of a covalent Mo-S(dithiolene) bonding interaction in these monooxido Mo(VI) compounds contributes to their low-energy ligand-to-metal charge transfer transitions. A second important d-p π bonding interaction derives from the ∼180° O(oxo)-Mo-E-C dihedral angle involving the alcoholate and thiolate donors, and this contributes to ancillary ligand contributions to the electronic structure of these species. The formation of [Mo(VI)O(OEt)L2](-) and [Mo(VI)O(SEt)L2](-) from the dioxidomolybdenum(VI) precursor may be regarded as a model for the active-site formation process that occurs in the dimethyl sulfoxide reductase family of pyranopterin molybdenum enzymes.

Archaeal Mo-Containing Glyceraldehyde Oxidoreductase Isozymes Exhibit Diverse Substrate Specificities through Unique Subunit Assemblies

Archaea use glycolytic pathways distinct from those found in bacteria and eukaryotes, where unique enzymes catalyze each reaction step. In this study, we isolated three isozymes of glyceraldehyde oxidoreductase (GAOR1, GAOR2 and GAOR3) from the thermoacidophilic archaeon Sulfolobus tokodaii. GAOR1-3 belong to the xanthine oxidoreductase superfamily, and are composed of a molybdo-pyranopterin subunit (L), a flavin subunit (M), and an iron-sulfur subunit (S), forming an LMS hetero-trimer unit. We found that GAOR1 is a tetramer of the STK17810/STK17830/STK17820 hetero-trimer, GAOR2 is a dimer of the STK23390/STK05620/STK05610 hetero-trimer, and GAOR3 is the STK24840/STK05620/STK05610 hetero-trimer. GAOR1-3 exhibited diverse substrate specificities for their electron donors and acceptors, due to their different L-subunits, and probably participate in the non-phosphorylative Entner-Doudoroff glycolytic pathway. We determined the crystal structure of GAOR2, as the first three-dimensional structure of an archaeal molybdenum-containing hydroxylase, to obtain structural insights into their substrate specificities and subunit assemblies. The gene arrangement and the crystal structure suggested that the M/S-complex serves as a structural scaffold for the binding of the L-subunit, to construct the three enzymes with different specificities. Collectively, our findings illustrate a novel principle of a prokaryotic multicomponent isozyme system.

Biogenesis of Escherichia coli DMSO Reductase: A Network of Participants for Protein Folding and Complex Enzyme Maturation

Protein folding and structure have been of interest since the dawn of protein chemistry. Following translation from the ribosome, a protein must go through various steps to become a functional member of the cellular society. Every protein has a unique function in the cell and is classified on this basis. Proteins that are involved in cellular respiration are the bioenergetic workhorses of the cell. Bacteria are resilient organisms that can survive in diverse environments by fine tuning these workhorses. One class of proteins that allow survival under anoxic conditions are anaerobic respiratory oxidoreductases, which utilize many different compounds other than oxygen as its final electron acceptor. Dimethyl sulfoxide (DMSO) is one such compound. Respiration using DMSO as a final electron acceptor is performed by DMSO reductase, converting it to dimethyl sulfide in the process. Microbial respiration using DMSO is reviewed in detail by McCrindle et al. (Adv Microb Physiol 50:147-198, 2005). In this chapter, we discuss the biogenesis of DMSO reductase as an example of the participant network for complex iron-sulfur molybdoenzyme maturation pathways.

Activation of molecular oxygen by a molybdenum complex for catalytic oxidation

A sterically demanding molybdenum(VI) dioxo complex was found to catalytically activate molecular oxygen and to transfer its oxygen atoms to phosphines. Intermediate peroxo as well as reduced mono-oxo complexes were isolated and fully characterized. Monomeric Mo(IV) monooxo species proved to be of an unusual nature with the coordinated phosphine trans to the oxo group. The reduced molybdenum centers can activate O2 to form a stable Mo(VI) oxo-peroxo complex unambiguously characterized by single crystal X-ray diffraction analysis. NMR experiments demonstrate that both oxygen atoms of the peroxo unit are transferred to an accepting substrate, generating the Mo(IV) intermediate and restarting the catalytic cycle.

A Bioinspired Molybdenum Complex as a Catalyst for the Photo- and Electroreduction of Protons

A molybdenum-dithiolene-oxo complex was prepared as a model of some active sites of Mo/W-dependent enzymes. The ligand, a quinoxaline-pyran-fused dithiolene, mimics molybdopterin present in these active sites. For the first time, this type of complex was shown to be active as a catalyst for the photoreduction of protons with excellent turnover numbers (500) and good stability in aqueous/organic media and for the electroreduction of protons in acetonitrile with remarkable rate constants (1030 s(-1) at -1.3 V versus Ag/AgCl). DFT calculations provided insight into the catalytic cycle of the reaction, suggesting that the oxo ligand plays a key role in proton exchange. These results provide a basis to optimize this new class of H2 -evolving catalysts.

Structural and mechanistic insights on nitrate reductases

Nitrate reductases (NR) belong to the DMSO reductase family of Mo-containing enzymes and perform key roles in the metabolism of the nitrogen cycle, reducing nitrate to nitrite. Due to variable cell location, structure and function, they have been divided into periplasmic (Nap), cytoplasmic, and membrane-bound (Nar) nitrate reductases. The first crystal structure obtained for a NR was that of the monomeric NapA from Desulfovibrio desulfuricans in 1999. Since then several new crystal structures were solved providing novel insights that led to the revision of the commonly accepted reaction mechanism for periplasmic nitrate reductases. The two crystal structures available for the NarGHI protein are from the same organism (Escherichia coli) and the combination with electrochemical and spectroscopic studies also lead to the proposal of a reaction mechanism for this group of enzymes. Here we present an overview on the current advances in structural and functional aspects of bacterial nitrate reductases, focusing on the mechanistic implications drawn from the crystallographic data.

Structural basis of enzymatic benzene ring reduction

In chemical synthesis, the widely used Birch reduction of aromatic compounds to cyclic dienes requires alkali metals in ammonia as extremely low-potential electron donors. An analogous reaction is catalyzed by benzoyl-coenzyme A reductases (BCRs) that have a key role in the globally important bacterial degradation of aromatic compounds at anoxic sites. Because of the lack of structural information, the catalytic mechanism of enzymatic benzene ring reduction remained obscure. Here, we present the structural characterization of a dearomatizing BCR containing an unprecedented tungsten cofactor that transfers electrons to the benzene ring in an aprotic cavity. Substrate binding induces proton transfer from the bulk solvent to the active site by expelling a Zn(2+) that is crucial for active site encapsulation. Our results shed light on the structural basis of an electron transfer process at the negative redox potential limit in biology. They open the door for biological or biomimetic alternatives to a basic chemical synthetic tool.

Structural and functional models in molybdenum and tungsten bioinorganic chemistry: description of selected model complexes, present scenario and possible future scopes

A brief description about some selected model complexes in molybdenum and tungsten bioinorganic chemistry is provided. The synthetic strategies involved and their limitations are discussed. Current status of molybdenum and tungsten bioinorganic modeling chemistry is presented briefly and synthetic problems associated therein are analyzed. Possible future directions which may expand the scope of modeling chemistry are suggested.

Isotropic exchange interaction between Mo and the proximal FeS center in the xanthine oxidase family member aldehyde oxidoreductase from Desulfovibrio gigas on native and polyalcohol inhibited samples: an EPR and QM/MM study

Aldehyde oxidoreductase from Desulfovibrio gigas (DgAOR) is a homodimeric molybdenum-containing protein that catalyzes the hydroxylation of aldehydes to carboxylic acids and contains a Mo-pyranopterin active site and two FeS centers called FeS 1 and FeS 2. The electron transfer reaction inside DgAOR is proposed to be performed through a chemical pathway linking Mo and the two FeS clusters involving the pyranopterin ligand. EPR studies performed on reduced as-prepared DgAOR showed that this pathway is able to transmit very weak exchange interactions between Mo(V) and reduced FeS 1. Similar EPR studies but performed on DgAOR samples inhibited with glycerol and ethylene glycol showed that the value of the exchange coupling constant J increases ~2 times upon alcohol inhibition. Structural studies in these DgAOR samples have demonstrated that the Mo-FeS 1 bridging pathway does not show significant differences, confirming that the changes in J observed upon inhibition cannot be ascribed to structural changes associated neither with pyranopterin and FeS 1 nor with changes in the electronic structure of FeS 1, as its EPR properties remain unchanged. Theoretical calculations indicate that the changes in J detected by EPR are related to changes in the electronic structure of Mo(V) determined by the replacement of the OHx labile ligand for an alcohol molecule. Since the relationship between electron transfer rate and isotropic exchange interaction, the present results suggest that the intraenzyme electron transfer process mediated by the pyranopterin moiety is governed by a Mo ligand-based regulatory mechanism.

Dehydrogenation of formic acid by Ir-bisMETAMORPhos complexes: experimental and computational insight into the role of a cooperative ligand

The synthesis of Ir-complexes with three bisMETAMORPhos ligands is reported. The activity of these systems towards HCOOH dehydrogenation and the dual role of the ligand during catalysis is discussed, using spectroscopic and computational methods.

The synthesis and tautomeric nature of three xanthene-based bisMETAMORPhos ligands (La–Lc) is reported. Coordination of these bis(sulfonamidophosphines) to Ir(acac)(cod) initially leads to the formation of Ir^I(L^H) species (1a), which convert via formal oxidative addition of the ligand to Ir^III(L) monohydride complexes 2a–c. The rate for this step strongly depends on the ligand employed. Ir^III complexes 2a–c were applied in the base-free dehydrogenation of formic acid, reaching turnover frequencies of 3090, 877 and 1791 h^–1, respectively. The dual role of the ligand in the mechanism of the dehydrogenation reaction was studied by ¹H and ³¹P NMR spectroscopy and DFT calculations. Besides functioning as an internal base, bisMETAMORPhos also assists in the pre-assembly of formic acid within the Ir-coordination sphere and aids in stabilizing the rate-determining transition state through hydrogen-bonding.

Shifting the metallocentric molybdoenzyme paradigm: the importance of pyranopterin coordination

In this review, we test the hypothesis that pyranopterin coordination plays a critical role in defining substrate reactivities in the four families of mononuclear molybdenum and tungsten enzymes (Mo/W-enzymes). Enzyme families containing a single pyranopterin dithiolene chelate have been demonstrated to have reactivity towards two (sulfite oxidase, SUOX-fold) and five (xanthine dehydrogenase, XDH-fold) types of substrate, whereas the major family of enzymes containing a bis-pyranopterin dithiolene chelate (dimethylsulfoxide reductase, DMSOR-fold) is reactive towards eight types of substrate. A second bis-pyranopterin enzyme (aldehyde oxidoreductase, AOR-fold) family catalyzes a single type of reaction. The diversity of reactions catalyzed by each family correlates with active site variability, and also with the number of pyranopterins and their coordination by the protein. In the case of the AOR-fold enzymes, inflexibility of pyranopterin coordination correlates with their limited substrate specificity (oxidation of aldehydes). In examples of the SUOX-fold and DMSOR-fold enzymes, we observe three types of histidine-containing charge-transfer relays that can: (1) connect the piperazine ring of the pyranopterin to the substrate-binding site (SUOX-fold enzymes); (2) provide inter-pyranopterin communication (DMSOR-fold enzymes); and (3) connect a pyran ring oxygen to deeply buried water molecules (the DMSOR-fold NarGHI-type nitrate reductases). Finally, sequence data mining reveals a number of bacterial species whose predicted proteomes contain large numbers (up to 64) of Mo/W-enzymes, with the DMSOR-fold enzymes being dominant. These analyses also reveal an inverse correlation between Mo/W-enzyme content and pathogenicity.

DFT study on the oxygen transfer mechanism in nitroethenediamine based H2-receptor antagonists using the bis-dithiolene complex as the model catalyst for N-oxide reductase enzyme

Nitroethenediamine is an important functional unit, which is present in H2-receptor antagonists. These drugs show low bioavailability due to the bacterial degradation caused by the N-oxide reductase type of enzymes present in the human colon. Quantum chemical studies have been carried out to elucidate the mechanism of metabolic degradation of nitroethenediamine in the active site of N-oxide reductase. Three different pathways have been explored for the N-oxide bond cleavage by the model system, Mo(IV) bis-dithiolene complex [Mo(OMe)(mdt)2](-), (where mdt=1,2-dimethyl-ethene-1,2-dithiolate) using B3LYP/6-311+G(d,p) and M06/6-311+G(d,p) Density Functional Theory methods. The oxygen atom transfer from the nitrogen atom of nitroethenediamine to the Mo(IV) complex, involves simultaneous weakening of the N-oxide bond and the formation of Mo-O bond through a least motion path. During this transfer, Mo center is converted from a square pyramidal geometry to a distorted octahedral geometry, to facilitate the process of oxygen atom transfer. The energy barrier for the oxygen atom transfer from the imine tautomer has been estimated to be 25.9kcal/mol however, the overall reaction has been found to be endothermic. On the other hand, oxygen transfer reaction from the nitronic acid tautomer requires 30.5kcal/mol energy leading to a highly exothermic metabolite (M-1) directly hence, this path can be considered thermodynamically favorable for this metabolite. The alternative path involving the oxygen atom transfer from the enamine tautomer requires comparatively a higher energy barrier (32.6kcal/mol) and leads to a slightly endothermic metabolite. This study established the structural and energetic details associated with the Mo(IV) bis-dithiolene complex that catalyzes the degradation of nitroethenediamine based drug molecules.

Infrared multiple photon dissociation spectroscopy of a gas-phase oxo-molybdenum complex with 1,2-dithiolene ligands

Electrospray ionization (ESI) in the negative ion mode was used to create anionic, gas-phase oxo-molybdenum complexes with dithiolene ligands. By varying ESI and ion transfer conditions, both doubly and singly charged forms of the complex, with identical formulas, could be observed. Collision-induced dissociation (CID) of the dianion generated exclusively the monoanion, while fragmentation of the monoanion involved decomposition of the dithiolene ligands. The intrinsic structure of the monoanion and the dianion were determined by using wavelength-selective infrared multiple-photon dissociation (IRMPD) spectroscopy and density functional theory calculations. The IRMPD spectrum for the dianion exhibits absorptions that can be assigned to (ligand) C=C, C–S, C—C≡N, and Mo=O stretches. Comparison of the IRMPD spectrum to spectra predicted for various possible conformations allows assignment of a pseudo square pyramidal structure with C_2v symmetry, equatorial coordination of MoO²⁺ by the S atoms of the dithiolene ligands, and a singlet spin state. A single absorption was observed for the oxidized complex. When the same scaling factor employed for the dianion is used for the oxidized version, theoretical spectra suggest that the absorption is the Mo=O stretch for a distorted square pyramidal structure and doublet spin state. A predicted change in conformation upon oxidation of the dianion is consistent with a proposed bonding scheme for the bent-metallocene dithiolene compounds [Lauher, J. W.; Hoffmann, R. J. Am. Chem. Soc.1976, 98, 1729−1742], where a large folding of the dithiolene moiety along the S···S vector is dependent on the occupancy of the in-plane metal d-orbital.

A Regioselective Synthesis of the Dephospho DIthiolene Protected Molybdopterin

The molybdopterin (MPT) is a complex molecule, made out of three distinctly different components. A retrosynthetic analysis provides a possible route for its synthesis that utilizes the coupling of a diamine with an osone analog. A regioselective condensation of the diamine with an osone affords the dephospho MPT, which has been characterized by NMR and IR spectroscopies, as well as high-resolution mass spectrometry.

Structural diversity of polyoxomolybdate clusters along the three-fold axis of the molybdenum storage protein

The molybdenum storage protein (MoSto) can store more than 100 Mo or W atoms as discrete polyoxometalate (POM) clusters. Here, we describe the three POM cluster sites along the threefold axis of the protein complex based on four X-ray structures with slightly different polyoxomolybdate compositions between 1.35 and 2 Å resolution. In contrast to the Moα-out binding site occupied by an Mo3 cluster, the Moα-in and Moβ binding sites contain rather weak and non-uniform electron density for the Mo atoms (but clearly identifiable by anomalous data), suggesting the presence of POM cluster ensembles and/or degradation products of larger aggregates. The "Moα-in cluster ensemble" was interpreted as an antiprism-like Mo6 species superimposed with an Mo7 pyramide and the "Moβ cluster ensemble" as an Mo13 cluster (present mostly in a degraded form) composed of a pyramidal Mo7 and a Mo3 building block linked by three spatially separated MoOx units. Inside the ball-shaped Mo13 cluster sits an occluded central atom, perhaps a metal ion. POM cluster formation at the Moα-in and Moβ sites appears to be driven by filtering out and binding/protecting self-assembled transient species complementary to the protein template.

Structural data on the periplasmic aldehyde oxidoreductase PaoABC from Escherichia coli: SAXS and preliminary X-ray crystallography analysis

The periplasmic aldehyde oxidoreductase PaoABC from Escherichia coli is a molybdenum enzyme involved in detoxification of aldehydes in the cell. It is an example of an αβγ heterotrimeric enzyme of the xanthine oxidase family of enzymes which does not dimerize via its molybdenum cofactor binding domain. In order to structurally characterize PaoABC, X-ray crystallography and small angle X-ray scattering (SAXS) have been carried out. The protein crystallizes in the presence of 20% (w/v) polyethylene glycol 3350 using the hanging-drop vapour diffusion method. Although crystals were initially twinned, several experiments were done to overcome twinning and lowering the crystallization temperature (293 K to 277 K) was the solution to the problem. The non-twinned crystals used to solve the structure diffract X-rays to beyond 1.80 Å and belong to the C2 space group, with cell parameters a = 109.42 Å, b = 78.08 Å, c = 151.77 Å, β = 99.77°, and one molecule in the asymmetric unit. A molecular replacement solution was found for each subunit separately, using several proteins as search models. SAXS data of PaoABC were also collected showing that, in solution, the protein is also an αβγ heterotrimer.

Kinetic and structural studies of aldehyde oxidoreductase from Desulfovibrio gigas reveal a dithiolene-based chemistry for enzyme activation and inhibition by H(2)O(2)

Mononuclear Mo-containing enzymes of the xanthine oxidase (XO) family catalyze the oxidative hydroxylation of aldehydes and heterocyclic compounds. The molybdenum active site shows a distorted square-pyramidal geometry in which two ligands, a hydroxyl/water molecule (the catalytic labile site) and a sulfido ligand, have been shown to be essential for catalysis. The XO family member aldehyde oxidoreductase from Desulfovibrio gigas (DgAOR) is an exception as presents in its catalytically competent form an equatorial oxo ligand instead of the sulfido ligand. Despite this structural difference, inactive samples of DgAOR can be activated upon incubation with dithionite plus sulfide, a procedure similar to that used for activation of desulfo-XO. The fact that DgAOR does not need a sulfido ligand for catalysis indicates that the process leading to the activation of inactive DgAOR samples is different to that of desulfo-XO. We now report a combined kinetic and X-ray crystallographic study to unveil the enzyme modification responsible for the inactivation and the chemistry that occurs at the Mo site when DgAOR is activated. In contrast to XO, which is activated by resulfuration of the Mo site, DgAOR activation/inactivation is governed by the oxidation state of the dithiolene moiety of the pyranopterin cofactor, which demonstrates the non-innocent behavior of the pyranopterin in enzyme activity. We also showed that DgAOR incubation with dithionite plus sulfide in the presence of dioxygen produces hydrogen peroxide not associated with the enzyme activation. The peroxide molecule coordinates to molybdenum in a η² fashion inhibiting the enzyme activity.

Oxo-carboxylato-molybdenum(VI) complexes possessing dithiolene ligands related to the active site of type II DMSOR family molybdoenzymes

Spectroscopic and kinetic studies indicate that oxo-carboxylato-molybdenum(VI) bis-dithiolene complexes, (Mo(VI)O(p-X-OBz)L2), have been generated at low temperature as active site structural models for the type II class of pyranopterin molybdenum DMSOR family enzymes. A DFT analysis of low energy charge transfer bands shows that these complexes possess a Mo-S(dithiolene) π-bonding interaction between the Mo(d(xy)) redox active molecular orbital and a cis S(p(z)) donor orbital located on one of the dithiolene ligands.

The sulfur shift: an activation mechanism for periplasmic nitrate reductase and formate dehydrogenase

A structural rearrangement known as sulfur shift occurs in some Mo-containing enzymes of the DMSO reductase family. This mechanism is characterized by the displacement of a coordinating cysteine thiol (or SeCys in Fdh) from the first to the second shell of the Mo-coordination sphere metal. The hexa-coordinated Mo ion found in the as-isolated state cannot bind directly any exogenous ligand (substrate or inhibitors), while the penta-coordinated ion, attained upon sulfur shift, has a free binding site for direct coordination of the substrate. This rearrangement provides an efficient mechanism to keep a constant coordination number throughout an entire catalytic pathway. This mechanism is very similar to the carboxylate shift observed in Zn-dependent enzymes, and it has been recently detected by experimental means. In the present paper, we calculated the geometries and energies involved in the sulfur-shift mechanism using QM-methods (M06/(6-311++G(3df,2pd),SDD)//B3LYP/(6-31G(d),SDD)). The results indicated that the sulfur-shift mechanism provides an efficient way to enable the metal ion for substrate coordination.

The respiratory arsenite oxidase: structure and the role of residues surrounding the rieske cluster

The arsenite oxidase (Aio) from the facultative autotrophic Alphaproteobacterium Rhizobium sp. NT-26 is a bioenergetic enzyme involved in the oxidation of arsenite to arsenate. The enzyme from the distantly related heterotroph, Alcaligenes faecalis, which is thought to oxidise arsenite for detoxification, consists of a large α subunit (AioA) with bis-molybdopterin guanine dinucleotide at its active site and a 3Fe-4S cluster, and a small β subunit (AioB) which contains a Rieske 2Fe-2S cluster. The successful heterologous expression of the NT-26 Aio in Escherichia coli has resulted in the solution of its crystal structure. The NT-26 Aio, a heterotetramer, shares high overall similarity to the heterodimeric arsenite oxidase from A. faecalis but there are striking differences in the structure surrounding the Rieske 2Fe-2S cluster which we demonstrate explains the difference in the observed redox potentials (+225 mV vs. +130/160 mV, respectively). A combination of site-directed mutagenesis and electron paramagnetic resonance was used to explore the differences observed in the structure and redox properties of the Rieske cluster. In the NT-26 AioB the substitution of a serine (S126 in NT-26) for a threonine as in the A. faecalis AioB explains a -20 mV decrease in redox potential. The disulphide bridge in the A. faecalis AioB which is conserved in other betaproteobacterial AioB subunits and the Rieske subunit of the cytochrome bc 1 complex is absent in the NT-26 AioB subunit. The introduction of a disulphide bridge had no effect on Aio activity or protein stability but resulted in a decrease in the redox potential of the cluster. These results are in conflict with previous data on the betaproteobacterial AioB subunit and the Rieske of the bc 1 complex where removal of the disulphide bridge had no effect on the redox potential of the former but a decrease in cluster stability was observed in the latter.

Deoxygenation of mono-oxo bis(dithiolene) Mo and W complexes by protonation

Protonation-assisted deoxygenation of a mono-oxo molybdenum center has been observed in many oxotransferases when the enzyme removes an oxo group to regenerate a substrate binding site. Such a reaction is reported here with discrete synthetic mono-oxo bis(dithiolene) molybdenum and tungsten complexes, the chemistry of which had been rarely studied because of the instability of the resulting deoxygenated products. An addition of tosylic acid to an acetonitrile solution of [Mo(IV)O(S2C2Ph2)2](2-) (1) and [W(IV)O(S2C2Ph2)2](2-) (2) results in the loss of oxide with a concomitant formation of novel deoxygenated complexes, [M(MeCN)2(S2C2Ph2)2] (M = Mo (3), W (4)), that have been isolated and characterized. Whereas protonation of 1 exclusively produces 3, two different reaction products can be generated from 2; an oxidized product, [WO(S2C2Ph2)2](-), is produced with 1 equiv of acid while a deoxygenated product, [W(MeCN)2(S2C2Ph2)2] (4), is generated with an excess amount of proton. Alternatively, complexes 3 and 4 can be obtained from photolysis of [Mo(CO)2(S2C2Ph2)2] (5) and [W(CO)2(S2C2Ph2)2] (6) in acetonitrile. A di- and a monosubstituted adducts of 3, [Mo(CO)2(S2C2Ph2)2] (5) and [Mo(PPh3)(MeCN)(S2C2Ph2)2] (7) are also reported.

Dithiolopyranthione Synthesis, Spectroscopy and an Unusual Reactivity with DDQ

The bicyclic pyran thiolone tetrahydro-3αH-[1,3]dithiolo[4,5-β]pyran-2-thione (3a) engages in a highly unusual fragmentation in the presence of DDQ. The pyran thiolone, 3a, was synthesized by chlorination of 3,4-dihydro-2H-pyran (1), followed by condensing with CS2 and NaSH. Reaction of 3a with DDQ generates the isomerized pyran thiolone tetrahydro-3αH-[1,3]dithiolo[4,5-β]pyran-2-thione (3b) and 4-benzyl-5-(3-hydroxypropyl)-1,3-dithiole-2-thione (4) via a deep-seated rearrangement. The identity of 3b was confirmed by single crystal X-ray analysis: P21/c, a=5.807(9) Å, b = 12.99(2) Å, c = 11.445(15), β=113.23(6)°. Mechanistic experiments and computational insight is used to explain the likely sequence of events in the highly unusual formation of 4. Collectively, these results establish fundamental reactivity patterns for further research in this area.

Characterization of a versatile organometallic pro-drug (CORM) for experimental CO based therapeutics

The complex fac-[Mo(CO)(3)(histidinate)]Na has been reported to be an effective CO-Releasing Molecule in vivo, eliciting therapeutic effects in several animal models of disease. The CO releasing profile of this complex in different settings both in vitro and in vivo reveals that the compound can readily liberate all of its three CO equivalents under biological conditions. The compound has low toxicity and cytotoxicity and is not hemolytic. CO release is accompanied by a decrease in arterial blood pressure following administration in vivo. We studied its behavior in solution and upon the interaction with proteins. Reactive oxygen species (ROS) generation upon exposure to air and polyoxomolybdate formation in soaks with lysozyme crystals were observed as processes ensuing from the decomposition of the complex and the release of CO.

Why is the molybdenum-substituted tungsten-dependent formaldehyde ferredoxin oxidoreductase not active? A quantum chemical study

Formaldehyde ferredoxin oxidoreductase is a tungsten-dependent enzyme that catalyzes the oxidative degradation of formaldehyde to formic acid. The molybdenum ion can be incorporated into the active site to displace the tungsten ion, but is without activity. Density functional calculations have been employed to understand the incapacitation of the enzyme caused by molybdenum substitution. The calculations show that the enzyme with molybdenum (Mo-FOR) has higher redox potential than that with tungsten, which makes the formation of the Mo(VI)=O complex endothermic by 14 kcal/mol. Following our previously suggested mechanism for this enzyme, the formaldehyde substrate oxidation was also investigated for Mo-FOR using the same quantum-mechanics-only model, except for the displacement of tungsten by molybdenum. The calculations demonstrate that formaldehyde oxidation occurs via a sequential two-step mechanism. Similarly to the tungsten-catalyzed reaction, the Mo(VI)=O species performs the nucleophilic attack on the formaldehyde carbon, followed by proton transfer in concert with two-electron reduction of the metal center. The first step is rate-limiting, with a total barrier of 28.2 kcal/mol. The higher barrier is mainly due to the large energy penalty for the formation of the Mo(VI)=O species.

The prokaryotic Mo/W-bisPGD enzymes family: a catalytic workhorse in bioenergetic

Over the past two decades, prominent importance of molybdenum-containing enzymes in prokaryotes has been put forward by studies originating from different fields. Proteomic or bioinformatic studies underpinned that the list of molybdenum-containing enzymes is far from being complete with to date, more than fifty different enzymes involved in the biogeochemical nitrogen, carbon and sulfur cycles. In particular, the vast majority of prokaryotic molybdenum-containing enzymes belong to the so-called dimethylsulfoxide reductase family. Despite its extraordinary diversity, this family is characterized by the presence of a Mo/W-bis(pyranopterin guanosine dinucleotide) cofactor at the active site. This review highlights what has been learned about the properties of the catalytic site, the modular variation of the structural organization of these enzymes, and their interplay with the isoprenoid quinones. In the last part, this review provides an integrated view of how these enzymes contribute to the bioenergetics of prokaryotes. This article is part of a Special Issue entitled: Metals in Bioenergetics and Biomimetics Systems.

Comparative genomics analysis of the metallomes

Biological trace metals are needed in small quantities, but used by all living organisms. They are employed in key cellular functions in a variety of biological processes, resulting in the various degree of dependence of organisms on metals. Most effort in the field has been placed on experimental studies of metal utilization pathways and metal-dependent proteins. On the other hand, systemic level analyses of metalloproteomes (or metallomes) have been limited for most metals. In this chapter, we focus on the recent advances in comparative genomics, which provides many insights into evolution and function of metal utilization. These studies suggested that iron and zinc are widely used in biology (presumably by all organisms), whereas some other metals such as copper, molybdenum, nickel, and cobalt, show scattered occurrence in various groups of organisms. For these metals, most user proteins are well characterized and their dependence on a specific element is evolutionarily conserved. We also discuss evolutionary dynamics of the dependence of user proteins on different metals. Overall, comparative genomics analysis of metallomes provides a foundation for the systemic level understanding of metal utilization as well as for investigating the general features, functions, and evolutionary dynamics of metal use in the three domains of life.

Interconversion of CO2 and formic acid by bio-inspired Ir complexes with pendent bases

Recent investigations of the interconversion of CO2 and formic acid using Ru, Ir and Fe complexes are summarized in this review. During the past several years, both the reaction rates and catalyst stabilities have been significantly improved. Remarkably, the interconversion (i.e., reversibility) has also been achieved under mild conditions in environmentally benign water solvent by slightly changing the pH of the aqueous solution. Only a few catalysts seem to reflect a bio-inspired design such as the use of proton responsive ligands, ligands with pendent bases or acids for a second-coordination-sphere interaction, electroresponsive ligands, and/or ligands having a hydrogen bonding function with a solvent molecule or an added reagent. The most successful of these is an iridium dinuclear complex catalyst that at least has the first three of these characteristics associated with its bridging ligand. By utilizing an acid/base equilibrium for proton removal, the ligand becomes a strong electron donor, resulting in Ir(I) character with a vacant coordination site at each metal center in slightly basic solution. Complemented by DFT calculations, kinetic studies of the rates of formate production using a related family of Ir complexes with and without such functions on the ligand reveal that the rate-determining step for the CO2 hydrogenation is likely to be H2 addition through heterolytic cleavage involving a "proton relay" through the pendent base. The dehydrogenation of formic acid, owing to the proton responsive ligands changing character under slightly acidic pH conditions, is likely to occur by a mechanism with a different rate-determining step. This article is part of a Special Issue entitled: Metals in Bioenergetics and Biomimetics Systems.

Pyranopterin conformation defines the function of molybdenum and tungsten enzymes

We have analyzed the conformations of 319 pyranopterins in 102 protein structures of mononuclear molybdenum and tungsten enzymes. These span a continuum between geometries anticipated for quinonoid dihydro, tetrahydro, and dihydro oxidation states. We demonstrate that pyranopterin conformation is correlated with the protein folds defining the three major mononuclear molybdenum and tungsten enzyme families, and that binding-site micro-tuning controls pyranopterin oxidation state. Enzymes belonging to the bacterial dimethyl sulfoxide reductase (DMSOR) family contain a metal-bis-pyranopterin cofactor, the two pyranopterins of which have distinct conformations, with one similar to the predicted tetrahydro form, and the other similar to the predicted dihydro form. Enzymes containing a single pyranopterin belong to either the xanthine dehydrogenase (XDH) or sulfite oxidase (SUOX) families, and these have pyranopterin conformations similar to those predicted for tetrahydro and dihydro forms, respectively. This work provides keen insight into the roles of pyranopterin conformation and oxidation state in catalysis, redox potential modulation of the metal site, and catalytic function.