Ultrafine Ni-MoOx Nanoparticles Anchored on Nitrogen-Doped Carbon Nanosheets: A Highly Efficient Noble-Metal-Free Catalyst for Ammonia Borane Hydrolysis

The development of low-cost and high-efficiency catalysts for the hydrolytic dehydrogenation of ammonia borane (AB, NH3BH3) is still a challenging technology. Herein, ultrafine MoOx-doped Ni nanoparticles (~3.0 nm) were anchored on g-C3N4@glucose-derived nitrogen-doped carbon nanosheets via a phosphate-mediated method. The strong adsorption of phosphate-mediated nitrogen-doped carbon nanosheets (PNCS) for metal ions is a key factor for the preparation of ultrasmall Ni nanoparticles (NPs). Notably, the alkaline environment formed by the reduction of metal ions removes the phosphate from the PNCS surface to generate P-free (P)NCS so that the phosphate does not participate in the subsequent catalytic reaction. The synthesized Ni-MoOx/(P)NCS catalysts exhibited outstanding catalytic properties for the hydrolysis of AB, with a high turnover frequency (TOF) value of up to 85.7 min-1, comparable to the most efficient noble-metal-free catalysts and commercial Pt/C catalyst ever reported for catalytic hydrogen production from AB hydrolysis. The superior performance of Ni-MoOx/(P)NCS can be ascribed to its well-dispersed ultrafine metal NPs, abundant surface basic sites, and electron-rich nickel species induced by strong electronic interactions between Ni-MoOx and (P)NCS. The strategy of combining multiple modification measures adopted in this study provides new insights into the development of economical and high-efficiency noble-metal-free catalysts for energy catalysis applications.

Manganese-catalyzed Efficient Synthesis of N-heterocycles and Aminoketones Using Glycerol as a C3 Synthon

Glycerol is one of the important biomass-derived feedstocks and the high-value utilizations of glycerol have attracted much attentions in recent years. Herein, we report a manganese catalyzed dehydrogenative coupling of glycerol with amines for the synthesis of substituted 2-methylquinoxalines, 2-ethylbenzimidazoles, and α-aminoketones without any external oxidant. In these reactions, NHC-based pincer manganese complex featuring a pyridine backbone displayed high catalytic activity and selectivity, in which hydrogen and water were produced as the only by-products using glycerol as a C3 synthon.

Ultrasound-assisted preparation of PdCo bimetallic nanoparticles loaded on beta zeolite for efficient catalytic hydrogen production from dodecahydro-N-ethylcarbazole

Research and development of high-performance catalysts is a key technology to realize hydrogen energy storage and transportation based on liquid organic hydrogen carriers. Co/beta was prepared using beta zeolite as a carrier via an electrostatic adsorption (ESA)-chemical reduction method, and it was used as the template and reducing agent to prepare bimetallic catalysts via an ultrasonic assisted galvanic replacement process (UGR). The fabricated PdCo/beta were characterized by TEM, XPS, FT-IR, XRD, H2-TPR, and H2-TPD. It was shown that the ultrafine PdCo nanoparticles (NPs) are evenly distributed on the surface of the beta zeolite. There is electron transfer between metal NPs and strong-metal-support-interaction (SMSI), which results in highly efficient catalytic dodecahydro-N-ethylcarbazole (12H-NEC) dehydrogenation performance of PdCo bimetallic catalysts. The dehydrogenation efficiency reached 100 % in 4 h at 180 °C and 95.3 % in 6 h at 160 °C. The TOF of 146.22 min-1 is 7 times that of Pd/beta. The apparent activation energy of the reaction is 66.6 kJ/mol, which is much lower than that of Pd/beta. Under the action of ultrasonic waves, the galvanic replacement reaction is accelerated, and the intermetal and metal-carrier interactions are enhanced, which improves the catalytic reaction performance.

Ethane and Propane Dehydrogenation on Small Platinum Clusters Supported on Silica: An Ab Initio Molecular Dynamics and DFT Study

The size-dependent activity of catalysts has been researched for a long time in the field of catalysis. Positively charged small Pt clusters enhance catalytic activity than bigger clusters and bulk for propane dehydrogenation. We performed DFT calculations on small Pt clusters adsorbed on silica support. The planar structure of Pt clusters is present till 4 Pt atoms, after which three-dimensional structures are observed. AIMD and DFT calculations for silica showed that it has a high surface area and thermal stability suitable to conduct dehydrogenation reactions. The adsorption of Pt cluster on silica results in the formation of directional bonds which affects the properties of the adsorbed Pt catalysts by changing the redox properties. In the bulk phase, ethane and propane molecules undergo dehydrogenation reactions with 0.133 eV atom-1 and 0.244 eV atom-1 energies, respectively. NEB calculations showed that except for Pt-2/SiO2 , all the even Pt clusters require less activation energy than the neighboring odd Pt clusters. Ethane molecule interacting with Pt-4/SiO2 , Pt-5/SiO2 , Pt-6/SiO2 , and propane with Pt-3/SiO2, Pt-4/SiO2 , Pt-5/SiO2 , Pt-6/SiO2 , follows the reverse Horiuti-Polanyi mechanism during dehydrogenation, whereas non-reverse Horiuti-Polanyi mechanism (which requires comparatively lower activation energy) is followed for smaller Pt clusters.

Divergent Chemo- and Biocatalytic Route to 16β-Methylcorticoids: Asymmetric Synthesis of Betamethasone Dipropionate, Clobetasol Propionate, and Beclomethasone Dipropionate

16β-Methylcorticoids are among the most important glucocorticoid steroids for the treatment of various dermatological disorders, respiratory infections, and other allergic reactions elicited during inflammatory responses of the human body. Betamethasone dipropionate, clobetasol propionate, and beclomethasone dipropionate are particularly noteworthy for their synthetic intractability. Despite five decades of research, these 16β-methylcorticoids have remained challenging synthetic targets owing to insurmountable issues of reactivity, selectivity, and cost efficiency associated with all previously explored strategies. We herein report our practicability-oriented strategy toward the unified stereoselective synthesis of 16β-methylcorticoids in 12.6-14.0 % overall yield from commercially available 9α-hydroxyandrost-4-ene-3,17-dione (9α-OH-AD). In this approach, the chiral C16β-Me and C17α-OH groups of the corticosteroid D ring were installed via a substrate-controlled diastereo- and enantioselective Mn-catalyzed oxidation-reduction hydration of Δ4,9(11),16 -triene-3,20-dione. The C1-C2 double bond of the corticosteroid A ring was constructed using an unprecedented engineered 3-ketosteroid-Δ1 -dehydrogenase (MK4-KstD)-catalyzed regioselective Δ1 -dehydrogenation of Δ4,9(11) -diene-3,21-dione. This strategy provides a general method and a key precursor for the divergent synthesis of a variety of glucocorticoids and related steroidal drugs.

The catalyst free synthesis of dibenzo[a,j]acridine and its applications in bioimaging of BF3 in HeLa cells

In this paper, we discuss how tetrahydrodibenzo[a,j]acridine (4-HA) loses its hydrogen, which makes dibenzo[a,j]acridine (ARM) and also how 4-HA can be synthesized effectively using 2-tetralone in high yield. Dehydrogenative condensation and dehydrogenation are the two processes that make up the overall reaction of this synthetic approach. In addition, the presence of BF3 caused a remarkable fluorescence shift in ARM. Test paper analysis was used for examining the practical usefulness of ARM, which can be seen under UV light, resulting in this unique phenomenon. The fluorescent bio imaging experiment demonstrates that the sensor ARM has the capability to detect BF3 in living HeLa cells.

Controlling Metal-Oxide Reducibility for Efficient C-H Bond Activation in Hydrocarbons

Knowing the structure of catalytically active species/phases and providing methods for their purposeful generation are two prerequisites for the design of catalysts with desired performance. Herein, we introduce a simple method for precise preparation of supported/bulk catalysts. It utilizes the ability of metal oxides to dissolve and to simultaneously precipitate during their treatment in an aqueous ammonia solution. Applying this method for a conventional VOx -Al2 O3 catalyst, the concentration of coordinatively unsaturated Al sites was tuned simply by changing the pH value of the solution. These sites affect the strength of V-O-Al bonds of isolated VOx species and thus the reducibility of the latter. This method is also applicable for controlling the reducibility of bulk catalysts as demonstrated for a CeO2 -ZrO2 -Al2 O3 system. The application potential of the developed catalysts was confirmed in the oxidative dehydrogenation of ethylbenzene to styrene with CO2 and in the non-oxidative propane dehydrogenation to propene. Our approach is extendable to the preparation of any metal oxide catalysts dissolvable in an ammonia solution.

Pd Loaded NiCo Hydroxides for Biomass Electrooxidation: Understanding the Synergistic Effect of Proton Deintercalation and Adsorption Kinetics

The key issue in the 5-hydroxymethylfurfural oxidation reaction (HMFOR) is to understand the synergistic mechanism involving the protons deintercalation of catalyst and the adsorption of the substrate. In this study, a Pd/NiCo catalyst was fabricated by modifying Pd clusters onto a Co-doped Ni(OH)2 support, in which the introduction of Co induced lattice distortion and optimized the energy band structure of Ni sites, while the Pd clusters with an average size of 1.96 nm exhibited electronic interactions with NiCo support, resulting in electron transfer from Pd to Ni sites. The resulting Pd/NiCo exhibited low onset potential of 1.32 V and achieved a current density of 50 mA/cm2 at only 1.38 V. Compared to unmodified Ni(OH)2 , the Pd/NiCo achieved an 8.3-fold increase in peak current density. DFT calculations and in situ XAFS revealed that the Co sites affected the conformation and band structure of neighboring Ni sites through CoO6 octahedral distortion, reducing the proton deintercalation potential of Pd/NiCo and promoting the production of Ni3+ -O active species accordingly. The involvement of Pd decreased the electronic transfer impedance, and thereby accelerated Ni3+ -O formation. Moreover, the Pd clusters enhanced the adsorption of HMF through orbital hybridization, kinetically promoting the contact and reaction of HMF with Ni3+ -O.

Creation of a Highly Active Small Cu-Based Catalyst Derived from Copper Aluminium Layered Double Hydroxide Supported on α-Al2 O3 for Acceptorless Alcohol Dehydrogenation

A highly dispersed carbonate-intercalated Cu2+ -Al3+ layered double hydroxide (CuAl LDH) was created on an unreactive α-Al2 O3 surface (CuAl LDH@α-Al2 O3 ) via a simple coprecipitation method of Cu2+ and Al3+ under alkaline conditions in the presence of α-Al2 O3 . A highly reducible CuO nanoparticles was generated, accompanied by the formation of CuAl2 O4 on the surface of α-Al2 O3 (CuAlO@α-Al2 O3 ) after calcination at 1073 K in air, as confirmed by powder X-ray diffraction (XRD) and Cu K-edge X-ray absorption near edge structure (XANES). The structural changes during the progressive heating process were monitored by using in-situ temperature-programmed synchrotron XRD (tp-SXRD). The layered structure of CuAl LDH@α-Al2 O3 completely disappeared at 473 K, and CuO or CuAl2 O4 phases began to appear at 823 K or 1023 K, respectively. Our synthesised CuAlO@α-Al2 O3 catalyst was highly active for the acceptorless dehydrogenation of benzylic, aliphatic, or cyclic aliphatic alcohols; the TON based on the amount of Cu increased to 163 from 3.3 of unsupported CuAlO catalyst in 1-phenylethanol dehydrogenation. The results suggested that Cu0 was obtained from the reduction of CuO in the catalyst matrix during the reaction without separate reduction procedure and acted as a catalytically active species.

Ferric Single-Site Catalyst Confined in a Zeolite Framework for Propane Dehydrogenation

Non-oxidative dehydrogenation of propane is a highly efficient approach for industrial preparation of propene that is commonly catalyzed by noble Pt or toxic Cr catalysts and suffers from coking. In this work, ferric catalyst confined in a zeolite framework was synthesized by a hydrothermal procedure. The isolated Fe in the framework formed distorted tetrahedra, which were beneficial for the selective dehydrogenation of propane and reached over 95 % propene selectivity and over 99 % total olefins selectivity. This catalyst had a silanol-free structure and was oxygen tolerant, hydrothermally stable, and coke free, with a deactivation constant of 0.01 h-1 . This study provided guidance for the synthesis of structural heteroatomic zeolite and efficient propane non-oxidative dehydrogenation over early transition metals.

Selective Oxidative Dehydrogenation of Ethane and Propane over Copper-Containing Mordenite: Insights into Reaction Mechanism and Product Protection

Copper(II)-containing mordenite (CuMOR) is capable of activation of C-H bonds in C1 -C3 alkanes, albeit there are remarkable differences between the functionalization of ethane and propane compared to methane. The reaction of ethane and propane with CuMOR results in the formation of ethylene and propylene, while the reaction of methane predominantly yields methanol and dimethyl ether. By combining in situ FTIR and MAS NMR spectroscopies as well as time-resolved Cu K-edge X-ray absorption spectroscopy, the reaction mechanism was derived, which differs significantly for each alkane. The formation of ethylene and propylene proceeds via oxidative dehydrogenation of the corresponding alkanes with selectivity above 95 % for ethane and above 85 % for propane. The formation of stable π-complexes of olefins with CuI sites, formed upon reduction of CuII -oxo species, protects olefins from further oxidation and/or oligomerization. This is different from methane, the activation of which proceeds via oxidative hydroxylation leading to the formation of surface methoxy species bonded to the zeolite framework. Our findings constitute one of the major steps in the direct conversion of alkanes to important commodities and open a novel research direction aiming at the selective synthesis of olefins.

Cooperative Ni(Co)-Ru-P Sites Activate Dehydrogenation for Hydrazine Oxidation Assisting Self-powered H2 Production

Water electrolysis for H2 production is restricted by the sluggish oxygen evolution reaction (OER). Using the thermodynamically more favorable hydrazine oxidation reaction (HzOR) to replace OER has attracted ever-growing attention. Herein, we report a twisted NiCoP nanowire array immobilized with Ru single atoms (Ru1 -NiCoP) as superior bifunctional electrocatalyst toward both HzOR and hydrogen evolution reaction (HER), realizing an ultralow working potential of -60 mV and overpotential of 32 mV for a current density of 10 mA cm-2 , respectively. Inspiringly, two-electrode electrolyzer based on overall hydrazine splitting (OHzS) demonstrates outstanding activity with a record-high current density of 522 mA cm-2 at cell voltage of 0.3 V. DFT calculations elucidate the cooperative Ni(Co)-Ru-P sites in Ru1 -NiCoP optimize H* adsorption, and enhance adsorption of *N2 H2 to significantly lower the energy barrier for hydrazine dehydrogenation. Moreover, a self-powered H2 production system utilizing OHzS device driven by direct hydrazine fuel cell (DHzFC) achieve a satisfactory rate of 24.0 mol h-1  m-2 .

Chemoselective α-Alkylation of Nitriles with Primary Alcohols by Manganese(I)-Catalysis

A sustainable and easy-to-use protocol for the alkylation of aryl nitriles with the earth-abundant manganese(I) catalyst is presented. The alkylation reaction employs readily available nitriles and naturally abundant alcohols as the coupling partners. The reaction proceeds chemoselectively and encompasses a broad substrate scope with good to excellent yields. The catalytic reaction yields selectively α-branched nitriles and water as the sole byproduct. Experimental studies were executed to understand the mechanism of the catalytic reaction.

Second Sphere Effects Promote Formic Acid Dehydrogenation by a Single-Atom Gold Catalyst Supported on Amino-Substituted Graphdiyne

Regulating the second sphere of homogeneous molecular catalysts is a common and effective method to boost their catalytic activities, while the second sphere effects have rarely been investigated for heterogeneous single-atom catalysts primarily due to the synthetic challenge for installing functional groups in their second spheres. Benefiting from the well-defined and readily tailorable structure of graphdiyne (GDY), an Au single-atom catalyst on amino-substituted GDY is constructed, where the amino group is located in the second sphere of the Au center. The Au atoms on amino-decorated GDY displayed superior activity for formic acid dehydrogenation compared with those on unfunctionalized GDY. The experimental studies, particularly the proton inventory studies, and theoretical calculations revealed that the amino groups adjacent to an Au atom could serve as proton relays and thus facilitate the protonation of an intermediate Au-H to generate H₂ . Our study paves the way to precisely constructing the functional second sphere on single-atom catalysts.

Poly-Hydride [AuI 7 (PPh3 )7 H5 ](SbF6 )2 cluster complex: Structure, Transformation, and Electrocatalytic CO2 Reduction Properties

Hydride Au^I bonds are labile due to the mismatch in electric potential of an oxidizing metal and reducing ligand, and therefore the structure and structure-activity relationships of nanoclusters that contain them are seldom studied. Herein, we report the synthesis and characterization of [Au₇ (PPh₃ )₇ H₅ ](SbF₆ )₂ (abbrev. Au₇ H₅ ²⁺ ), an Au cluster complex containing five hydride ligands, which decomposed to give [Au₈ (PPh₃ )₇ ]²⁺ (abbrev. Au₈ ²⁺ ) upon exposure to light (300 to 450 nm). The valence state of Au^I and H^- was verified by density functional theory (DFT) calculations, NMR, UV/Vis and XPS. The two nanoclusters behaved differently in the electrocatalytic CO₂ reduction reaction (CO₂ RR): Au₇ H₅ ²⁺ exhibited 98.2 % selectivity for H₂ , whereas Au₈ ²⁺ was selective for CO (73.5 %). Further DFT calculations showed that the H^- ligand inhibited the CO₂ RR process compared with the electron-donor H.

Current Trends and Perspectives in Microbial Bioconversions of Steroids

The microbiological transformation of sterols is currently the technological basis for the industrial production of valuable steroid precursors, the so-called synthons, from which a wide range of steroid and indane isoprenoids are obtained by combined chemical and enzymatic routes. These compounds include value-added corticoids, neurosteroids, sex hormones, bile acids, and other terpenoid lipids required by the medicine, pharmaceutical, food, veterinary, and agricultural industries.Progress in understanding the molecular mechanisms of microbial degradation of steroids, and the development and implementation of genetic technologies, opened a new era in steroid biotechnology. Metabolic engineering of microbial producers makes it possible not only to improve the biocatalytic properties of industrial strains by enhancing their target activity and/or suppressing undesirable activities in order to avoid the formation of by-products or degradation of the steroid core, but also to redirect metabolic fluxes in cells towards accumulation of new metabolites that may be useful for practical applications. Along with whole-cell catalysis, the interest of researchers is growing in enzymatic methods that make it possible to carry out selective structural modifications of steroids, such as the introduction of double bonds, the oxidation of steroidal alcohols, or the reduction of steroid carbonyl groups. A promising area of research is strain engineering based on the heterologous expression of foreign steroidogenesis systems (bacterial, fungal, or mammalian) that ensure selective formation of demanded hydroxylated steroids.Here, current trends and progress in microbial steroid biotechnology over the past few years are briefly reviewed, with a particular focus on the application of metabolic engineering and synthetic biology techniques to improve existing and create new whole-cell microbial biocatalysts.

Oxidative Cyclodehydrogenation of Trinaphthylamine: Selective Formation of a Nitrogen-Centered Polycyclic π-System Comprising 5- and 7-Membered Rings

We describe a new type of nitrogen-centered polycyclic scaffold comprising a unique combination of 5-, 6-, and 7-membered rings. The compound is accessible through an intramolecular oxidative cyclodehydrogenation of tri(1-naphthyl)amine. To the best of our knowledge this is the very first example of a direct 3-fold cyclization of a triarylamine under oxidative conditions. The unusual ring fusion motif is confirmed by X-ray crystallography and the impact of cyclization on the electronic and photophysical properties is investigated both experimentally and theoretically based on density-functional theory (DFT) calculations. The formation of the unexpected product is rationalized by detailed mechanistic studies on the DFT level. The results suggest the cyclization to occur under kinetic control via a dicationic mechanism.

Efficient Synthesis of C3-Alkylated and Alkenylated Indoles via Manganese-Catalyzed Dehydrogenation

The catalytic dehydrogenation of alcohols is essential for the sustainable production of valuable products. This provids a new strategy for green organic synthesis in chemical industries. Herein, we describe a manganese-based catalytic system that enables the efficient synthesis of C3-alkylated indoles from benzyl alcohols and indoles via the borrowing hydrogen process. Furthermore, dehydrogenative coupling of 2-arylethanols and indoles yields C3-alkenylated indoles. Meanwhile, reacting 2-aminophenethanol instead of indoles can also obtain the corresponding indole products with high selectivity under the same conditions.

Preparation of highly dispersed Pd/SBA-15 catalysts for dodecahydro-N-ethylcarbazole dehydrogenation reaction by ion exchange-glow discharge

Dehydrogenation reactions are critical in hydrogen storage based on a liquid organic hydrogen carrier (LOHC) system. Speeding up the dehydrogenation rate and lowering the reaction temperature are the main focuses of LOHC dehydrogenation catalysts. In this paper, Pd/SBA-15 catalysts (Pd-IP/S15) were prepared by NaOH treatment of surface hydroxyl groups on SBA-15, the ion exchange of Na⁺ with Pd(NH₃)₄²⁺, and then reduction of Pd ions via glow discharge plasma. The dehydrogenation performance of dodecahydro-N-ethylcarbazole on the prepared catalysts is studied. The turnover frequency of Pd-IP/S15 is 13.94 min^-1 at 170°C, which is 10.25 times that of commercial Pd/C. It is ensured via the ion exchange method that Pd(NH₃)₄²⁺ could be precisely targeted at the Si-OH of SBA-15 to form Si-O-Pd(NH₃)₄²⁺, which effectively prevents the aggregation and uncontrollable growth of Pd nanoparticles (NPs) during the in situ reduction by plasma. Pd NPs with high dispersion are obtained on SBA-15, which enhances the catalytic activity of Pd-IP/S15. The coordination of Pd NPs with O of Si-OH on SBA-15 enabled Pd-IP/S15 to exhibit excellent catalytic stability. After 7 dehydrogenation cycles at 180°C, the dehydrogenation efficiency remained above 97%.

Characterization of Multifunctional and Non-stereoselective Oxidoreductase RubE7/IstO, Expanding the Functional Diversity of the Flavoenzyme Superfamily

Flavin-dependent enzymes enable a broad range of redox transformations and generally act as monofunctional and stereoselective catalysts. Herein, we report the investigation of a multifunctional and non-stereoselective FMN-dependent oxidoreductase RubE7 from the rubrolone biosynthetic pathway. Our study outlines a single RubE7-catalysed sequential reduction of three spatially distinct bonds in a tropolone ring and a reversible double-bond reduction and dehydrogenation. The crystal structure of IstO (a RubE7 homologue) with 2.0 Å resolution reveals the location of the active site at the interface of two monomers, and the size of active site is large enough to permit both flipping and free rotation of the substrate, resulting in multiple nonselective reduction reactions. Molecular docking and site mutation studies demonstrate that His106 is oriented towards the substrate and is important for the reverse dehydrogenation reaction.

Research progress of CO2 oxidative dehydrogenation of propane to propylene over Cr-free metal catalysts

CO₂-assisted oxidative dehydrogenation of propane (CO₂-ODHP) is an attractive strategy to offset the demand gap of propylene due to its potentiality of reducing CO₂ emissions, especially under the demands of peaking CO₂ emissions and carbon neutrality. The introduction of CO₂ as a soft oxidant into the reaction not only averts the over-oxidation of products, but also maintains the high oxidation state of the redox-active sites. Furthermore, the presence of CO₂ increases the conversion of propane by coupling the dehydrogenation of propane (DHP) with the reverse water gas reaction (RWGS) and inhibits the coking formation to prolong the lifetime of catalysts via the reverse Boudouard reaction. An effective catalyst should selectively activate the C-H bond but suppress the C-C cleavage. However, to prepare such a catalyst remains challenging. Chromium-based catalysts are always applied in industrial application of DHP; however, their toxic properties are harmful to the environment. In this aspect, exploring environment-friendly and sustainable catalytic systems with Cr-free is an important issue. In this review, we outline the development of the CO₂-ODHP especially in the last ten years, including the structural information, catalytic performances, and mechanisms of chromium-free metal-based catalyst systems, and the role of CO₂ in the reaction. We also present perspectives for future progress in the CO₂-ODHP.

Mechanistic insights into the dehydrogenation of formaldehyde, formic acid and methanol using the Pt4 cluster as a promising catalyst

Reaction mechanisms of the dehydrogenation of formaldehyde, formic acid and methanol on the Pt₄ cluster were computationally investigated using density functional theory (DFT) with the B3LYP functional in the conjunction with the aug-cc-pVTZ basis sets for H, C and O atoms, and the cc-pVDZ-PP basis set for Pt. Herein, the key mechanistic aspects of three possible pathways of the dehydrogenation of these compounds are summarized. The results indicate that the formation of H₂ and CO or CO₂ molecules is more energetically favorable than the generation of H and H₂O, HCHO products. Generally, the formation of H₂ molecule in the presence of catalysts is more favorable than the direct decomposition of either HCHO, HCOOH or CH₃OH molecule. The use of Pt₄ catalyst significantly reduces the energy barriers for C-H and O-H bond cleavage of all three compounds to 14, 9 and 12 kcal/mol, respectively. The decomposition of HCOOH is found to be the most energetically favorable. In addition, the mechanistic insights of the reactions confirm the reduction of the energy barriers of the gas-phase dehydrogenation by 67-82 kcal/mol and bring it to the values smaller than 14 kcal/mol in the presence of the Pt₄ catalysts.

Enhancing the sustainability of KsdD as a biocatalyst for steroid transformation by immobilization on epoxy support

The Δ1-dehydrogenation of 3-ketosteroid substrates is a crucial reaction in the production of steroids. Although 3-ketosteroid Δ1-dehydrogenase (KsdD) catalyzes this reaction with high efficiency and selectivity, the low stability and high cost of the purified enzyme catalyst have limited its industrial application. In this study, an epoxy support was used to evaluate the covalent immobilization of KsdD from Pimelobacter simplex, and the best androsta-1,4-diene-317-dione (ADD) production was achieved after optimized immobilization of KsdD enzyme in 1.5 M NaH₂PO₄- Na₂HPO₄ buffer (pH 6.5) for 12 h at 25 °C. The immobilized KsdD exhibited higher tolerance toward 20 % methanol. The dehydrogenation reaction reached a conversion efficiency of up to 90.0 % in 2 h when using 0.6 mg/mL of 4-androstene-317-dione (AD). The W299A and W299 G mutants of KsdD were also immobilized, and both showed the better catalytic performance with higher k_cat/K_M values compared with the wild type (WT). The immobilized W299A, W299 G and WT KsdD respectively maintained 70.5, 65.7 and 38.7 % of their initial activity at the end of 15 reaction cycles. Furthermore, the W299A retained 66.3 % of the initial activity after 30 days of incubation at 4 °C, and was more stable than free KsdD, Thus, the immobilized W299A is a promising biocatalyst for steroid dehydrogenation. In this study, we investigated the application of immobilized enzymes for the dehydrogenation of steroids, which will be of great importance for improving the development of green technology and sustainable use of biocatalysts in the steroid manufacturing industry.

Coke Formation during Propane Dehydrogenation over Ga-Rh Supported Catalytically Active Liquid Metal Solutions

Supported Catalytically Active Liquid Metal Solutions (SCALMS) were recently described as a new class of heterogeneous catalysts, where the catalytic transformation takes place at the highly dynamic interface of a liquid alloy. Their application in alkane dehydrogenation has been claimed to be superior to classical heterogeneous catalysts, because the single atom nature of Rh dissolved in liquid Ga hinders the formation of significant amounts of coke, e. g. by oligomerisation of carbon fragments and excessive dehydrogenation. In the present study, we investigate the coking behaviour of Ga-Rh SCALMS during dehydrogenation of propane in detail by means of high-resolution thermogravimetry. We report that the application of Ga-Rh SCALMS indeed limits the formation of coke when compared to the Ga-free Rh catalyst, in particular when relating coke formation to the catalytic performance. Furthermore, the formed coke has been shown to be highly reactive during temperature programmed oxidation in 21 % O2/He with onset temperatures of approx. 150 °C enabling a regeneration of the Ga-Rh SCALMS system under mild conditions. The activation energy of the oxidation lies in the lower range of values reported for spent cracking catalysts. Monitoring the formation of coke and performance of SCALMS in situ via thermogravimetry coupled with mass spectrometry revealed the continuous formation of coke, which becomes the only process affecting the net weight change after a certain time on stream.

Comparative studies on similarities and differences of cyclodipeptide oxidases for installation of C-C double bonds at the diketopiperazine ring

Cyclodipeptide oxidases (CDOs) perform dehydrogenations on diketopiperazines and play an important role in the cyclodipeptide diversification. In this study, we investigated the two known CDOs AlbA/B and Ndas_1146/7 and one new member, CDO-Np. LC-MS monitoring of 32 cyclodipeptide biotransformations in E. coli revealed good consumption of cyclodipeptides containing aromatic amino acids. Cyclodipeptides consisting solely of aliphatic amino acids were poor substrates. In vitro assays of 34 substrates with crude enzyme extracts and product identification proved that the CDO-Np-containing extract catalyzes the formation of two C-C double bonds in many cases. The extracts containing the two other enzymes had lower activities and catalyzed mainly didehydrogenations. For didehydrogenation, the phenylalanyl or tyrosyl site was usually preferred. No or very low acceptance of benzodiazepinediones and a 2,6-diketopiperazine proved the importance of the 2,5-diketopiperazine ring. N-Methylation at the diketopiperazine ring or prenylation of the tryptophan-containing cyclodipeptides influences the enzyme activity and product spectrum. KEY POINTS: • Comparison of catalytic activities of three enzymes; Diverse cyclodipeptides and derivatives as substrates; Determination of double bond formation using²H-labeled substrates; Product identification also by interpretation of MS²fragmentation pattern.

Biotransformation of androstenedione and androstadienedione by selected Ascomycota and Zygomycota fungal strains

Filamentous fungi is a huge phylum of lower eukaryotes with diverse activities towards various substrates, however, their biocatalytic potential towards steroids remains greatly underestimated. In this study, more than forty Ascomycota and Zygomycota fungal strains of 23 different genera were screened for the ability to catalyze structural modifications of 3-oxo-androstane steroids, - androst-4-ene-3,17-dione (AD) and androsta-1,4-diene-3,17-dione (ADD). Previously unexplored for these purposes strains of Absidia, Acremonium, Beauveria, Cunninghamella, Doratomyces, Drechslera, Fusarium, Gibberella genera were revealed capable of producing in a good yield valuable 7α-, 7β-, 11α- and 14α-hydroxylated derivatives, as well as 17β-reduced and 1(2)-dehydrogenated androstanes. The bioconversion routes of AD and ADD were proposed based on the key intermediates identification and time courses of the bioprocesses. Six ascomycete strains were discovered to provide effective 7β-hydroxylation of ADD which has not been so far reported. The structures of major products and intermediates were confirmed by HPLC, mass-spectrometry (MS), ¹H and ¹³C NMR analyses. The results contribute to the knowledge on the functional diversity of steroid-transforming filamentous fungi. Previously unexplored fungal biocatalysts capable of effective performing structural modification of AD and ADD can be applied for industrial bioprocesses of new generation.

Palladium-catalyzed α,β-dehydrogenation of acyclic ester equivalents promoted by a novel electron deficient phosphinooxazoline ligand

A unique example of Pd-catalyzed decarboxylative dehydrogenation of fully substituted N-acyl allyl enol carbonates is enabled by a new electron deficient phosphinooxazoline (PHOX) ligand. The reaction proceeds from the Z-enol carbonate to provide dehydrogenation products exclusively in high E/Z selectivity, while the E-enol carbonate provides the α-allylation product with only minor dehydrogenation. The reaction proceeds with a broad scope of (Z)-enol carbonates derived from N-acyl indoles to furnish acyclic formal α,β-unsaturated ester equivalents.

A novel dehydrogenase 17β-HSDx from Rhodococcus sp. P14 with potential application in bioremediation of steroids contaminated environment

Steroids are endocrine disrupting compounds in human and are distributed in various environments. Our previous study showed that a marine bacterium Rhodococcus sp. P14 was able to efficiently degrade one typical steroid estradiol. In this study, we showed that P14 could also use other steroids, including estriol and testosterone, as sole carbon source for growth. Two dehydrogenation products, 16-hydroxestrone and androst-4-ene-3, 17-dione, were detected during estriol and testosterone degradation, respectively. By screening the genome, a short chain dehydrogenase gene was identified and named as 17β-HSDx. Expression of 17β-HSDx was induced in P14 when estriol, estradiol or testosterone was used as single carbon source. In addition, 17β-HSDx was shown to have dehydrogenation ability of transforming estriol to 16-hydroxestrone, estradiol to estrone and testosterone to androst-4-ene-3, 17-dione. This is the first short chain dehydrogenase identified in bacteria with dehydrogenation ability on various steroids substrates. Overall, this study reveals that 17β-HSDx has potential application in the bioremediation of steroids contaminated environment.

Cu(OH)2 supported on Fe(OH)3 as a synergistic and highly efficient system for the dehydrogenation of ammonia-borane

Herein, we first describe the physical mixture of Cu(OH)₂/Fe(OH)₃ as a composite catalyst precursor for the dehydrogenation of ammonia borane (AB) in methanol. During the initial period of catalytic reaction, Cu nanoparticles were formed in-situ. The catalytic activity of Cu nanoparticles can be significantly enhanced with the assistance of Fe species and OH^-. A maximum turnover frequency (TOF) of 50.3 mol_H2 mol_{total metal}^-1 min^-1 (135.6 mol_H2 mol_Cu^-1 min^-1) was achieved at ambient temperature, which is superior to those of previously reported Fe or Cu based systems.

Exploration of M(100)-2×1 (M=Si, Ge) surface termination through hydrogen passivation using ethane and ammonia-borane derivatives: A theoretical approach

Termination process of Si(100)-2 × 1 as well as Ge(100)-2 × 1 reconstructed surfaces have been explored comprehensively through the dehydrogenation of ethane and ammonia-borane and their several analogues by employing density functional theory (DFT). From our study, it is evident that the termination of Si-surface via the dehydrogenation of aforementioned ethane and NH₃BH₃ derivatives is more feasible compared to Ge-surface. For ethane, the investigation shows that the substitution of non-participating hydrogens with +I group (electron donating) causes an enhancement in the kinetic and thermodynamic feasibility of the termination process, whereas the implementation of -I substituent (electron withdrawing) makes an adverse effect. While exploring the termination of Si- as well as Ge-surfaces through the dehydrogenation of NH₃BH₃ and its derivatives, it is noticed that from both the kinetic as well as thermodynamic perspectives, the termination processes are more feasible than that of ethane and its derivatives. We have further examined the detailed mechanism of each termination process by analyzing the geometrical parameters and NPA charges. From bonding evaluation, it is evident that the hydrogen abstraction from ethane by both the surfaces is symmetric in nature, where both the hydrogens show slightly positive charge. But for NH₃BH₃ the hydrogen abstraction process becomes asymmetric, where the boron associated hydrogen is abstracted as hydride by the electrophilic surface Si (Ge) and the hydrogen bonded with the N-centre is abstracted as proton by the nucleophilic surface Si (Ge). Overall, the present theoretical work reveals one of the efficient chemical processes for terminating Si as well as Ge(100)-2 × 1 reconstructed surfaces through the formation of non-polar SiH bonds.

Insights into the catalytic mechanism of dehydrogenase BphB: A quantum mechanics/molecular mechanics study

The present study delineated the dehydrogenation mechanism of cis-2,3-dihydro-2,3-dihydroxybiphenyl (2,3-DDBPH) and cis-2,3-dihydro-2,3-dihydroxy-4,4'-dichlorobiphenyl (2,3-DD-4,4'-DBPH) by Pandoraea pnomenusa strain B-356 cis-2,3-dihydro-2,3-dihydroxybiphenyl dehydrogenase (BphB) in atomistic detail. The enzymatic process was investigated by a combined quantum mechanics/molecular mechanics (QM/MM) approach. Five different snapshots were extracted and calculated, which revealed that the Boltzmann-weighted average barriers of 2,3-DDBPH and 2,3-DD-4,4'-DBPH dehydrogenation processes are 10.7 and 11.5 kcal mol^-1, respectively. The established dehydrogenation mechanism provides new insight into the degradation processes of other chlorinated 2,3-DDBPH. In addition to Asn115, Ser142, and Lys149, the importance of Ile 89, Asn143, Pro184, Met 187, Thr189, and Lue 191 during the dehydrogenation process of 2,3-DDBPH and 2,3-DD-4,4'-DBPH were also highlighted to search for promising mutation targets for improving the catalytic efficiency of BphB.

Towards a comprehensive understanding of the Si(100)-2×1 surface termination through hydrogen passivation using methylamine and methanol: a theoretical approach

Using density functional theory, we explored the termination process of Si (100)-2 × 1 reconstructed surface mechanistically through the dehydrogenation of small molecules, considering methyl amine and methanol as terminating reagents. At first, both the terminating reagents form two types of adduct through adsorption on the Si (100)-2 × 1 surface, one in chemisorption mode and the other via physisorption, from which the dehydrogenation process is initiated. By analyzing the activation barriers, it was observed that termination of the Si-surface through the dehydrogenation is kinetically almost equally feasible using either reagent. We further examined in detail the mechanism for each termination process by analyzing geometrical parameters and natural population analysis charges. From bonding evaluation, it is evident that hydrogen abstraction from adsorbates on the Si-surface is asymmetric in nature, where one hydrogen is abstracted as hydride by the electrophilic surface Si and the other hydrogen is abstracted as proton by the neucleophilic surface Si. Moreover, it was also observed that hydride transfer from adsorbate to the Si-surface occurs first followed by proton transfer. Overall, our theoretical interpretation provides a mechanistic understanding of the Si (100)-2 × 1 reconstructed surface termination by amine and alcohol that will further motivate researchers to design different types of decorated semiconductor devices. Graphical Abstract Surface termination process of Si(100)-2×1 through formation of non-polar Si-H bonds via dehydrogenation of methylamine and methanol as terminating reagents.

One-pot three-component synthesis and oxidation of functionalized tetrahydrobenzo[d]pyrrolo[2,1-b]thiazoles

Triethylamine-promoted cycloaddition reactions of N-phenacyl and N-alkoxycarbonylmethylbenzothiazolium bromides with aromatic aldehydes and malononitrile (ethyl cyanoacetate, pivaloylacetonitrile) in ethanol afforded functionalized tetrahydrobenzo[d]pyrrolo[2,1-b]thiazoles in good yields and various diastereoselectivity. The oxidation reaction of the functionalized tetrahydrobenzo[d]pyrrolo[2,1-b]thiazoles with DDQ in different solvents resulted in diverse benzothiazole derivatives and benzo[d]pyrrolo[2,1-b]thiazoles. The reaction mechanism and the stereochemistry of this tandem [3 [Formula: see text] 2] cycloaddition reaction and sequential oxidation reaction are illustrated based on analysis of the reactive intermediates and obtained products.

Theoretical investigation of the selective dehydration and dehydrogenation of ethanol catalyzed by small molecules

Catalytic dehydration and dehydrogenation reactions of ethanol have been investigated systematically using the ab initio quantum chemistry methods The catalysts include water, hydrogen peroxide, formic acid, phosphoric acid, hydrogen fluoride, ammonia, and ethanol itself. Moreover, a few clusters of water and ethanol were considered to simulate the catalytic mechanisms in supercritical water and supercritical ethanol. The barriers for both dehydration and dehydrogenation can be reduced significantly in the presence of the catalysts. It is revealed that the selectivity of the catalytic dehydration and dehydrogenation depends on the acidity and basicity of the catalysts and the sizes of the clusters. The acidic catalyst prefers dehydration while the basic catalysts tend to promote dehydrogenation more effectively. The calculated water-dimer catalysis mechanism supports the experimental results of the selective oxidation of ethanol in the supercritical water. It is suggested that the solvent- and catalyst-free self-oxidation of the supercritical ethanol could be an important mechanism for the selective dehydrogenation of ethanol on the theoretical point of view.

A Cu-Catalysed Radical Cross-Dehydrogenative Coupling Approach to Acridanes and Related Heterocycles

The synthesis of acridanes and related compounds through a Cu-catalysed radical cross-dehydrogenative coupling of simple 2-[2-(arylamino)aryl]malonates is reported. This method can be further streamlined to a one-pot protocol involving the in situ fomation of the 2-[2-(arylamino)aryl]malonate by α-arylation of diethyl malonate with 2-bromodiarylamines under Pd catalysis, followed by Cu-catalysed cyclisation.

Chemical Pathways of Corticosteroids, Industrial Synthesis from Sapogenins

Corticosteroids are products of high industrial and commercial importance. There are dozens of different synthesis published for all of them. Some are coming from academia and some from industry. Here, industrial processes for the synthesis of prednisone, prednisolone, hydrocortisone, dexamethasone, betamethasone, and methylprednisolone are described. The starting material is diosgenin and the desired molecules are reached due to a good combination of chemistry and biotechnology that was developed along the second part of the twentieth century.

Steroid Bioconversions

Steroid modifications by selected wild-type and engineered strains of microorganisms became an effective tool for the production of high-valued steroidal drugs and their precursors for the pharmaceutical industry. Some microorganisms are effective at the performance of sterol side-chain degradation, oxyfunctionalization of steroid core, and redox reactions at different positions of the steroid molecule. A number of bioprocesses using steroid-transforming microbial strains are well established on an industrial level. Although a range of biocatalytic methods has been developed, selection of suitable microorganisms, as well as creation of new engineered strains, is of great importance for generation of improved bioprocesses and production schemes for obtaining known and new metabolites with potent biological activity. The achievements in genetic and metabolic engineering of steroid-transforming strains in combination with novel approaches in the enzymatic and whole-cell biocatalysis provide a platform for highly effective and selective biotransformations.Here, we briefly review the current state and prospects in the field of microbial bioconversions with special attention to the application of molecular microbiology methods for the generation of new whole cell biocatalysts.

Palladium-Catalyzed Aerobic Dehydrogenation of Cyclic Hydrocarbons for the Synthesis of Substituted Aromatics and Other Unsaturated Products

Catalytic dehydrogenation of saturated or partially saturated six-membered carbocycles into aromatic rings represents an appealing strategy for the synthesis of substituted arenes. Particularly effective methods have been developed for the dehydrogenation of cyclohexanones and cyclohexenes into substituted phenol, aniline, and benzene derivatives, respectively. In this Perspective, we present the contributions of our research group to the discovery and development of palladium-based catalysts for aerobic oxidative dehydrogenation methods, including general methods for conversion of cyclohexanones and cyclohexenones into substituted phenols and a complementary method for partial dehydrogenation cyclohexanones to cyclohexenones. The mechanistic basis for chemoselective conversion of cyclohexanones to phenols or enones is presented. These results are presented within the context of recent methods developed by others for the synthesis of aryl ethers, anilines and other substituted arenes. Overall, Pd-catalyzed dehydrogenation methods provide a compelling strategy for selective synthesis of aromatic and related unsaturated molecules.

An aryl dioxygenase shows remarkable double dioxygenation capacity for diverse bis-aryl compounds, provided they are carbocyclic

The bacterial dioxygenation of mono- or polycyclic aromatic compounds is an intensely studied field. However, only in a few cases has the repeated dioxygenation of a substrate possessing more than a single aromatic ring been described. We previously characterized the aryl-hydroxylating dioxygenase BphA-B4h, an artificial hybrid of the dioxygenases of the biphenyl degraders Burkholderia xenovorans LB400 and Pseudomonas sp. strain B4-Magdeburg, which contains the active site of the latter enzyme, as an exceptionally powerful biocatalyst. We now show that this dioxygenase possesses a remarkable capacity for the double dioxygenation of various bicyclic aromatic compounds, provided that they are carbocyclic. Two groups of biphenyl analogues were examined: series A compounds containing one heterocyclic aromatic ring and series B compounds containing two homocyclic aromatic rings. Whereas all of the seven partially heterocyclic biphenyl analogues were solely dioxygenated in the homocyclic ring, four of the six carbocyclic bis-aryls were converted into ortho,meta-hydroxylated bis-dihydrodiols. Potential reasons for failure of heterocyclic dioxygenations are discussed. The obtained bis-dihydrodiols may, as we also show here, be enzymatically re-aromatized to yield the corresponding tetraphenols. This opens a way to a range of new polyphenolic products, a class of compounds known to exert multiple biological activities. Several of the obtained compounds are novel molecules.

Asymmetric Iridium-Catalyzed C-C Coupling of Chiral Diols via Site-Selective Redox-Triggered Carbonyl Addition

Cyclometalated π-allyliridium C,O-benzoate complexes modified by axially chiral chelating phosphine ligands display a pronounced kinetic preference for primary alcohol dehydrogenation, enabling highly site-selective redox-triggered carbonyl additions of chiral primary-secondary 1,3-diols with exceptional levels of catalyst-directed diastereoselectivity. Unlike conventional methods for carbonyl allylation, the present redox-triggered alcohol C-H functionalizations bypass the use of protecting groups, premetalated reagents, and discrete alcohol-to-aldehyde redox reactions.

Mechanistic Enzymology of the Radical SAM Enzyme DesII

DesII is a member of the radical SAM family of enzymes that catalyzes radical-mediated transformations of TDP-4-amino-4,6-didexoy-D-glucose as well as other sugar nucleotide diphosphates. Like nearly all radical SAM enzymes, the reactions begin with the reductive homolysis of SAM to produce a 5'-deoxyadenosyl radical which is followed by regiospecific hydrogen atom abstraction from the substrate. What happens next, however, depends on the nature of the substrate radical so produced. In the case of the biosynthetically relevant substrate, a radical-mediated deamination ensues; however, when this amino group is replaced with a hydroxyl, one instead observes dehydrogenation. The factors that govern the fate of the initially generated substrate radical as well as the mechanistic details underlying these transformations have been a key focus of research into the chemistry of DesII. This review will discuss recent discoveries pertaining to the enzymology of DesII, how it may relate to understanding other radical-mediated lyases and dehydrogenases and the working hypotheses currently being investigated regarding the mechanism of DesII catalysis.

Three new fusidic acid derivatives and their antibacterial activity

Two steroid acids, cephalosporin P1 and isocephalosporin P1, were isolated from Hapsidospora irregularis FERM BP-2511. These compounds are structurally related to fusidic acid. Their NMR data were completely assigned on the basis of the 2D NMR spectra. Incubation of these two compounds with Microbacterium oxydans CGMCC 1788 in Luria-Bertani broth yielded the same set of three new 3-dehydrogenated products, 3-keto-isocephalosporin P1, 3-keto-cephalosporin P1 and 6-deacetyl-3-keto-cephalosporin P1. The final pH of the bacterial culture was 9.0. Incubation of 3-keto-isocephalosporin P1 or 3-keto-cephalosporin P1 in Tris-HCl buffer (pH 9.0) revealed that these two compounds can convert to each other by shifting the acetyl group between C-6 and C-7. The acetyl group at C-6 or C-7 can also be removed by hydrolysis to yield the minor product 6-deacetyl-3-keto-cephalosporin P1. These fusidic acid derivatives were tested for the antibacterial activity against the Gram-positive pathogen Staphylococcus aureus. 3-Keto-cephalosporin P1 showed the highest activity among the five compounds, with a minimal inhibition concentration (MIC) of 4 μg/mL, which is more potent than the substrate cephalosporin P1. Both cephalosporin P1 and 3-keto-cephalosporin P1 were active against methicillin-resistant S. aureus, with the same MIC of 8 μg/mL.

Efficient conversion of myricetin from Ampelopsis grossedentata extracts and its purification by MIP-SPE

In this study, we developed an efficient conversion process of dihydromyricetin to myricetin from Ampelopsis grossedentata extracts. The content of myricetin increased from 2.38% to 85.57%, demonstrating the successful dehydrogenation of dihydromyricetin. Molecularly imprinted polymers (MIPs) were prepared by surface imprinting method using silica microspheres as the support matrices and myricetin as template. The MIPs were applied for the selective adsorption of myricetin. The chemical structure of the MIPs was characterized by Fourier transform infrared spectroscopy and scanning electron microscopy. Static, dynamic and selective adsorption experiments showed that the MIPs exhibited good adsorption ability, rather fast template rebinding kinetics, and appreciate selectivity over structurally related compounds. Accordingly, the MIPs were applied as the selective sorbent in SPE to purify myricetin obtained through dehydrogenation, followed by HPLC-UV analysis. The recoveries of myricetin and dihydromyricetin were 92.7% and 55.6%, respectively. This study demonstrates the feasibility of using the developed MIP-SPE method to purify and enrich myricetin in the natural products.

Interconversion of CO2 and formic acid by bio-inspired Ir complexes with pendent bases

Recent investigations of the interconversion of CO2 and formic acid using Ru, Ir and Fe complexes are summarized in this review. During the past several years, both the reaction rates and catalyst stabilities have been significantly improved. Remarkably, the interconversion (i.e., reversibility) has also been achieved under mild conditions in environmentally benign water solvent by slightly changing the pH of the aqueous solution. Only a few catalysts seem to reflect a bio-inspired design such as the use of proton responsive ligands, ligands with pendent bases or acids for a second-coordination-sphere interaction, electroresponsive ligands, and/or ligands having a hydrogen bonding function with a solvent molecule or an added reagent. The most successful of these is an iridium dinuclear complex catalyst that at least has the first three of these characteristics associated with its bridging ligand. By utilizing an acid/base equilibrium for proton removal, the ligand becomes a strong electron donor, resulting in Ir(I) character with a vacant coordination site at each metal center in slightly basic solution. Complemented by DFT calculations, kinetic studies of the rates of formate production using a related family of Ir complexes with and without such functions on the ligand reveal that the rate-determining step for the CO2 hydrogenation is likely to be H2 addition through heterolytic cleavage involving a "proton relay" through the pendent base. The dehydrogenation of formic acid, owing to the proton responsive ligands changing character under slightly acidic pH conditions, is likely to occur by a mechanism with a different rate-determining step. This article is part of a Special Issue entitled: Metals in Bioenergetics and Biomimetics Systems.