Nanocomposite Microgels for the Selective Separation of Halogen Compounds from Aqueous Solution

Nanocomposite microgels that selectively adsorb and release halogen compounds were developed. These nanocomposite microgels consist of poly(2-methoxyethyl acrylate) (pMEA) and a poly(oligo ethylene glycol methacrylate) hydrogel matrix. Therefore, the methoxy groups of the former are crucial for the halogen bonding, while the presence of the latter adds colloidal stability and allows controlled uptake/release of the halogen compounds. Such nanocomposite microgels may not only be used as dispersed carriers, but also in films and columnar formations. Thus, these unprecedented polymer/polymer nanocomposite microgels resolve a variety of problems associated with, e.g., the removal of halogen compounds from wastewater, or with the delivery of halogen-containing drugs.

Structured Macroporous Hydrogels: Progress, Challenges, and Opportunities

Structured macroporous hydrogels that have controllable porosities on both the nanoscale and the microscale offer both the swelling and interfacial properties of bulk hydrogels as well as the transport properties of "hard" macroporous materials. While a variety of techniques such as solvent casting, freeze drying, gas foaming, and phase separation have been developed to fabricate structured macroporous hydrogels, the typically weak mechanics and isotropic pore structures achieved as well as the required use of solvent/additives in the preparation process all limit the potential applications of these materials, particularly in biomedical contexts. This review highlights recent developments in the field of structured macroporous hydrogels aiming to increase network strength, create anisotropy and directionality within the networks, and utilize solvent-free or additive-free fabrication methods. Such functional materials are well suited for not only biomedical applications like tissue engineering and drug delivery but also selective filtration, environmental sorption, and the physical templating of secondary networks.

Synthesis of hydrogel-bearing phenylboronic acid moieties and their applications in glucose sensing and insulin delivery

In past few years, phenylboronic acids (PBAs) have attracted researcher's attention due to their unique responsiveness towards diol-containing molecules such as glucose.

pH-Switchable and self-healable hydrogels based on ketone type acylhydrazone dynamic covalent bonds

Stimuli-responsive hydrogels using dynamic covalent bonds (DCBs) as cross-links may exhibit simultaneously the stimuli-responsibility of the physical gels and stability of the chemical gels. We prepared well-defined, ketone-based polymers based on commercially available diacetone acrylamide (DAAM) by a reversible addition-fragmentation chain transfer (RAFT) polymerization technique. The polymers could react with hexanedihydrazide yielding hydrogels. The mechanics, flexible properties and gelator concentration of the hydrogels can be tuned by varying the ratio of DAAM. Gelation time and hydrogel stability were gravely affected by the pH of the surrounding medium. The hydrogels possess self-healing ability without any external stimuli and undergo switchable sol-gel transition by the alternation of pH. In addition, the hydrogels showed pH-responsive controlled release behavior for rhodamine B. These kinds of ketone-type acylhydrazone DCB hydrogels, avoiding the aldehyde component, may ameliorate their biocompatibility and find potential applications in biomedicines, tissue engineering, etc.

Injectable Anisotropic Nanocomposite Hydrogels Direct in Situ Growth and Alignment of Myotubes

While injectable in situ cross-linking hydrogels have attracted increasing attention as minimally invasive tissue scaffolds and controlled delivery systems, their inherently disorganized and isotropic network structure limits their utility in engineering oriented biological tissues. Traditional methods to prepare anisotropic hydrogels are not easily translatable to injectable systems given the need for external equipment to direct anisotropic gel fabrication and/or the required use of temperatures or solvents incompatible with biological systems. Herein, we report a new class of injectable nanocomposite hydrogels based on hydrazone cross-linked poly(oligoethylene glycol methacrylate) and magnetically aligned cellulose nanocrystals (CNCs) capable of encapsulating skeletal muscle myoblasts and promoting their differentiation into highly oriented myotubes in situ. CNC alignment occurs on the same time scale as network gelation and remains fixed after the removal of the magnetic field, enabling concurrent CNC orientation and hydrogel injection. The aligned hydrogels show mechanical and swelling profiles that can be rationally modulated by the degree of CNC alignment and can direct myotube alignment both in two- and three-dimensions following coinjection of the myoblasts with the gel precursor components. As such, these hydrogels represent a critical advancement in anisotropic biomimetic scaffolds that can be generated noninvasively in vivo following simple injection.

Injectable and Degradable Poly(Oligoethylene glycol methacrylate) Hydrogels with Tunable Charge Densities as Adhesive Peptide-Free Cell Scaffolds

Injectable, dual-responsive, and degradable poly(oligo ethylene glycol methacrylate) (POEGMA) hydrogels are demonstrated to offer potential for cell delivery. Charged groups were incorporated into hydrazide and aldehyde-functionalized thermoresponsive POEGMA gel precursor polymers via the copolymerization of N,N'-dimethylaminoethyl methacrylate (DMAEMA) or acrylic acid (AA) to create dual-temperature/pH-responsive in situ gelling hydrogels that can be injected via narrow gauge needles. The incorporation of charge significantly broadens the swelling, degradation, and rheological profiles achievable with injectable POEGMA hydrogels without significantly increasing nonspecific protein adsorption or chronic inflammatory responses following in vivo subcutaneous injection. However, significantly different cell responses are observed upon charge incorporation, with charged gels significantly improving 3T3 mouse fibroblast cell adhesion in 2D and successfully delivering viable and proliferating ARPE-19 human retinal epithelial cells via an "all-synthetic" matrix that does not require the incorporation of cell-adhesive peptides.

Physiological pH-dependent gelation for 3D printing based on the phase separation of gelatin and oxidized dextran

An extrudable hydrogel with tunable gelation time under physiological pH ranges based on the phase separation of gelatin and oxidized dextran was demonstrated.

Reactive electrospinning of degradable poly(oligoethylene glycol methacrylate)-based nanofibrous hydrogel networks

A direct, all-aqueous electrospinning method for fabricating degradable nanofibrous hydrogel networks is reported in which hydrazide and aldehyde-functionalized poly(oligoethylene glycol methacrylate) (POEGMA) polymers are simultaneously electrospun and cross-linked. The resulting networks are spatially well-defined, mechanically stable (both dry and wet), and offer extremely fast swelling responses, suggesting potential utility as smart hydrogels and tunable tissue engineering matrices.

"Click" Chemistry-Tethered Hyaluronic Acid-Based Contact Lens Coatings Improve Lens Wettability and Lower Protein Adsorption

Improving the wettability of and reducing the protein adsorption to contact lenses may be beneficial for improving wearer comfort. Herein, we describe a simple "click" chemistry approach to surface functionalize poly(2-hydroxyethyl methacrylate) (pHEMA)-based contact lenses with hyaluronic acid (HA), a carbohydrate naturally contributing to the wettability of the native tear film. A two-step preparation technique consisting of laccase/TEMPO-mediated oxidation followed by covalent grafting of hydrazide-functionalized HA via simple immersion resulted in a model lens surface that is significantly more wettable, more water retentive, and less protein binding than unmodified pHEMA while maintaining the favorable transparency, refractive, and mechanical properties of a native lens. The dipping/coating method we developed to covalently tether the HA wetting agent is simple, readily scalable, and a highly efficient route for contact lens modification.

Antibacterial modification of an injectable, biodegradable, non-cytotoxic block copolymer-based physical gel with body temperature-stimulated sol-gel transition and controlled drug release

Biomaterials are being extensively used in various biomedical fields; however, they are readily infected with microorganisms, thus posing a serious threat to the public health care. We herein presented a facile route to the antibacterial modification of an important A-B-A type biomaterial using poly (ethylene glycol) methyl ether (mPEG)- poly(ε-caprolactone) (PCL)-mPEG as a typical model. Inexpensive, commercial bis(2-hydroxyethyl) methylammonium chloride (DMA) was adopted as an antibacterial unit. The effective synthesis of the antibacterial copolymer mPEG-PCL-∼∼∼-PCL-mPEG (where ∼∼∼ denotes the segment with DMA units) was well confirmed by FTIR and (1)H NMR spectra. At an appropriate modification extent, the DMA unit could render the copolymer mPEG-PCL-∼∼∼-PCL-mPEG highly antibacterial, but did not largely alter its fascinating intrinsic properties including the thermosensitivity (e.g., the body temperature-induced sol-gel transition), non-cytotoxicity, and controlled drug release. A detailed study on the sol-gel-sol transition behavior of different copolymers showed that an appropriate extent of modification with DMA retained a sol-gel-sol transition, despite the fact that a too high extent caused a loss of sol-gel-sol transition. The hydrophilic and hydrophobic balance between mPEG and PCL was most likely broken upon a high extent of quaternization due to a large disturbance effect of DMA units at a large quantity (as evidenced by the heavily depressed PCL segment crystallinity), and thus the micelle aggregation mechanism for the gel formation could not work anymore, along with the loss of the thermosensitivity. The work presented here is highly expected to be generalized for synthesis of various block copolymers with immunity to microorganisms. Light may also be shed on understanding the phase transition behavior of various multiblock copolymers.

Properties of Poly(ethylene glycol) Hydrogels Cross-Linked via Strain-Promoted Alkyne-Azide Cycloaddition (SPAAC)

A series of poly(ethylene glycol) (PEG) hydrogels was synthesized using strain-promoted alkyne-azide cycloaddition (SPAAC) between PEG chains terminated with either aza-dibenzocyclooctynes or azide functionalities. The gelation process was found to occur rapidly upon mixing the two components in aqueous solution without the need for external stimuli or catalysts, making the system a candidate for use as an injectable hydrogel. The mechanical and rheological properties of these hydrogels were found to be tunable by varying the polymer molecular weight and the number of cross-linking groups per chain. The gelation times of these hydrogels ranged from 10 to 60 s at room temperature. The mass-based swelling ratios varied from 45 to 76 at maximum swelling (relative to the dry state), while the weight percent of polymer in these hydrogels ranged from 1.31 to 2.05%, demonstrating the variations in amount of polymer required to maintain the structural integrity of the gel. Each hydrogel degraded at a different rate in PBS at pH = 7.4, with degradation times ranging from 1 to 35 days. By changing the composition of the two starting components, it was found that the Young's modulus of each hydrogel could be varied from 1 to 18 kPa. Hydrogel incubation with bovine serum albumin showed minimal protein adsorption. Finally, a cell cytotoxicity study of the precursor polymers with 3T3 fibroblasts demonstrated that the azide- and strained alkyne-functionalized PEGs are noncytotoxic.

Thiol-ene click hydrogels for therapeutic delivery

Hydrogels are of growing interest for the delivery of therapeutics to specific sites in the body. For use as a delivery vehicle, hydrophilic precursors are usually laden with bioactive moieties and then directly injected to the site of interest for in situ gel formation and controlled release dictated by precursor design. Hydrogels formed by thiol-ene click reactions are attractive for local controlled release of therapeutics owing to their rapid reaction rate and efficiency under mild aqueous conditions, enabling in situ formation of gels with tunable properties often responsive to environmental cues. Herein, we will review the wide range of applications for thiol-ene hydrogels, from the prolonged release of anti-inflammatory drugs in the spine to the release of protein-based therapeutics in response to cell-secreted enzymes, with a focus on their clinical relevance. We will also provide a brief overview of thiol-ene click chemistry and discuss the available alkene chemistries pertinent to macromolecule functionalization and hydrogel formation. These chemistries include functional groups susceptible to Michael type reactions relevant for injection and radically-mediated reactions for greater temporal control of formation at sites of interest using light. Additionally, mechanisms for the encapsulation and controlled release of therapeutic cargoes are reviewed, including i) tuning the mesh size of the hydrogel initially and temporally for cargo entrapment and release and ii) covalent tethering of the cargo with degradable linkers or affinity binding sequences to mediate release. Finally, myriad thiol-ene hydrogels and their specific applications also are discussed to give a sampling of the current and future utilization of this chemistry for delivery of therapeutics, such as small molecule drugs, peptides, and biologics.

Injectable Self-Healing Glucose-Responsive Hydrogels with pH-Regulated Mechanical Properties

Dynamically restructuring pH-responsive hydrogels are synthesized, employing dynamic covalent chemistry between phenylboronic acid and cis-diol modified poly(ethylene glycol) macromonomers. These gels display shear-thinning behavior, followed by a rapid structural recovery (self-healing). Size-dependent in vitro controlled and glucose-responsive release of proteins from the hydrogel network, as well as the biocompatibility of the gels, are evaluated both in vitro and in vivo.

Tuning the properties of injectable poly(oligoethylene glycol methacrylate) hydrogels by controlling precursor polymer molecular weight

The properties of POEGMA hydrogels are tuned in a chemistry-independent manner via manipulation of the molecular weight of precursor polymers.

Injectable cationic hydrogels with high antibacterial activity and low toxicity

We prepared injectable cationic hydrogels with strong antibacterial activity and remarkably low toxicity by in situ thiol–ene “click” reaction between dimethacrylate terminated poly(hexamethylene guanidine) (PHMGDMA) and poly[oligo(ethylene) glycol mercaptosuccinate] (POEGMS) under physiological conditions.

Injectable Interpenetrating Network Hydrogels via Kinetically Orthogonal Reactive Mixing of Functionalized Polymeric Precursors

The enhanced mechanics, unique chemistries, and potential for domain formation in interpenetrating network (IPN) hydrogels have attracted significant interest in the context of biomedical applications. However, conventional IPNs are not directly injectable in a biological context, limiting their potential utility in such applications. Herein, we report a fully injectable and thermoresponsive interpenetrating polymer network formed by simultaneous reactive mixing of hydrazone cross-linked poly(N-isopropylacrylamide) (PNIPAM), and thiosuccinimide cross-linked poly(N-vinylpyrrolidone) (PVP). The resulting IPN gels rapidly (<1 min) after injection without the need for heat, UV irradiation, or small-molecule cross-linkers. The IPNs, cross-linked by kinetically orthogonal mechanisms, showed a significant synergistic enhancement in shear storage modulus compared to the individual component networks as well as distinctive pore morphology, degradation kinetics, and thermal swelling; in particular, significantly lower hysteresis was observed over the thermal phase transition relative to single-network PNIPAM hydrogels.

Adaptable hydrogel networks with reversible linkages for tissue engineering

Adaptable hydrogels have recently emerged as a promising platform for three-dimensional (3D) cell encapsulation and culture. In conventional, covalently crosslinked hydrogels, degradation is typically required to allow complex cellular functions to occur, leading to bulk material degradation. In contrast, adaptable hydrogels are formed by reversible crosslinks. Through breaking and re-formation of the reversible linkages, adaptable hydrogels can be locally modified to permit complex cellular functions while maintaining their long-term integrity. In addition, these adaptable materials can have biomimetic viscoelastic properties that make them well suited for several biotechnology and medical applications. In this review, an overview of adaptable-hydrogel design considerations and linkage selections is presented, with a focus on various cell-compatible crosslinking mechanisms that can be exploited to form adaptable hydrogels for tissue engineering.

Temperature-Induced Assembly of Monodisperse, Covalently Cross-Linked, and Degradable Poly(N-isopropylacrylamide) Microgels Based on Oligomeric Precursors

A simple, rapid, solvent-free, and scalable thermally driven self-assembly approach is described to produce monodisperse, covalently cross-linked, and degradable poly(N-isopropylacrylamide) (PNIPAM) microgels based on mixing hydrazide (PNIPAM-Hzd) and aldehyde (PNIPAM-Ald) functionalized PNIPAM precursors. Preheating of a seed PNIPAM-Hzd solution above its phase transition temperature produces nanoaggregates that are subsequently stabilized and cross-linked by the addition of PNIPAM-Ald. The ratio of PNIPAM-Hzd:PNIPAM-Ald used to prepare the microgels, the time between PNIPAM-Ald addition and cooling, the temperature to which the PNIPAM-Hzd polymer solution is preheated, and the concentration of PNIPAM-Hzd in the initial seed solution can all be used to control the size of the resulting microgels. The microgels exhibit similar thermal phase transition behavior to conventional precipitation-based microgels but are fully degradable into oligomeric precursor polymers. The microgels can also be lyophilized and redispersed without any change in colloidal stability or particle size and exhibit no significant cytotoxicity in vitro. We anticipate that microgels fabricated using this approach may facilitate translation of the attractive properties of such microgels in vivo without the concerns regarding microgel clearance that exist with other PNIPAM-based microgels.

“Off-the-shelf” thermoresponsive hydrogel design: tuning hydrogel properties by mixing precursor polymers with different lower-critical solution temperatures

Mixing POEGMA precursor polymers with different LCSTs leads to linear changes in macroscopic gel properties (e.g. mechanics, swelling) but non-linear changes in properties dependent on gel microstructure (e.g. protein adsorption, cell adhesion).

An injectable drug-loaded hydrogel using a “clickable” amphiphilic triblock copolymer as a precursor

A PCL-POEGM-PCL amphiphilic triblock copolymer was facilely synthesized in “one pot”, which can disperse hydrophobic drugs in aqueous solution and be crosslinked by poly[oligo(ethylene glycol)mercaptosuccinate] (POEGMS) under physiological conditions.

Injectable hydrogels based on poly(ethylene glycol) and derivatives as functional biomaterials

The design criteria for injectable, in situ-gelling hydrogels are reviewed in conjunction with highlights on recent progress in the preparation of injectable PEG and PEG-analogue poly(oligoethylene glycol methacrylate) (POEGMA) hydrogels.

A facile route to fabricate a biodegradable hydrogel for controlled pesticide release

An environmentally friendly hydrogel induced by hydrazone bond formation can be triggered with the temperature and pH to achieve controllable avermectin release.

Injectable poly(oligoethylene glycol methacrylate)-based hydrogels with tunable phase transition behaviours: physicochemical and biological responses

The potential of poly(oligoethylene glycol methacrylate) (POEGMA) hydrogels with varying thermosensitivities as soft materials for biomedical applications is demonstrated. Hydrogels are prepared from hydrazide and aldehyde functionalized POEGMA precursors, yielding POEGMA hydrogels with a volume phase transition temperature (VPTT) below (PO0), close to (PO10) and well above (PO100) physiological temperature. Hydrogels with VPTTs close to and above physiological temperature exhibit biological properties similar to those typically observed for poly(ethylene glycol) hydrogels (i.e. low protein adsorption, low cell adhesion and minimal inflammatory responses in vivo) while hydrogels with VPTTs lower than physiological temperature exhibit biological properties more analogous to poly(N-isopropylacrylamide) above its phase transition temperature (temperature-switchable cell adhesion, higher protein adsorption and somewhat more acute inflammation in vivo). As such, the use of POEGMA precursors with varying chain lengths of ethylene oxide grafts offers a versatile platform for the design of hydrogels with tunable physiological properties via simple copolymerization.