High Figure of Merit (FOM) of Bragg Modes in Au-Coated Nanodisk Arrays for Plasmonic Sensing

Gold-coated nanodisk arrays of nearly micron periodicity are reported that have high figure of merit (FOM) and sensitivity necessary for plasmonic refractometric sensing, with the added benefit of suitability for surface-enhanced Raman scattering (SERS), large-scale microfabrication using standard photolithographic techniques and a simple instrumental setup. Gold nanodisk arrays are covered with a gold layer to excite the Bragg modes (BM), which are the propagative surface plasmons localized by the diffraction from the disk array. This generates surface-guided modes, localized as standing waves, leading to highly confined fields confirmed by a mapping of the SERS intensity and numerical simulations with 3D finite element method. The optimal gold-coated nanodisk arrays are applied for refractometric sensing in transmission spectroscopy with better performance than nanohole arrays and they are integrated to a 96-well plate reader for detection of IgY proteins in the nanometer range in PBS. The potential for sensing in biofluids is assessed with IgG detection in 1:1 diluted urine. The structure exhibits a high FOM of up to 46, exceeding the FOM of structures supporting surface plasmon polaritons and comparable to more complex nanostructures, demonstrating that subwavelength features are not necessary for high-performance plasmonic sensing.

Paper-based assays for urine analysis

A transformation of the healthcare industry is necessary and imminent: hospital-centered, reactive care will soon give way to proactive, person-centered care which focuses on individuals' well-being. However, this transition will only be made possible through scientific innovation. Next-generation technologies will be the key to developing affordable and accessible care, while also lowering the costs of healthcare. A promising solution to this challenge is low-cost continuous health monitoring; this approach allows for effective screening, analysis, and diagnosis and facilitates proactive medical intervention. Urine has great promise for being a key resource for health monitoring; unlike blood, it can be collected effortlessly on a daily basis without pain or the need for special equipment. Unfortunately, the commercial rapid urine analysis tests that exist today can only go so far-this is where the promise of microfluidic devices lies. Microfluidic devices have a proven record of being effective analytical devices, capable of controlling the flow of fluid samples, containing reaction and detection zones, and displaying results, all within a compact footprint. Moving past traditional glass- and polymer-based microfluidics, paper-based microfluidic devices possess the same diagnostic ability, with the added benefits of facile manufacturing, low-cost implementation, and disposability. Hence, we review the recent progress in the application of paper-based microfluidics to urine analysis as a solution to providing continuous health monitoring for proactive care. First, we present important considerations for point-of-care diagnostic devices. We then discuss what urine is and how paper functions as the substrate for urine analysis. Next, we cover the current commercial rapid tests that exist and thereby demonstrate where paper-based microfluidic urine analysis devices may fit into the commercial market in the future. Afterward, we discuss various fabrication techniques that have been recently developed for paper-based microfluidic devices. Transitioning from fabrication to implementation, we present some of the clinically implemented urine assays and their importance in healthcare and clinical diagnosis, with a focus on paper-based microfluidic assays. We then conclude by providing an overview of select biomarker research tailored towards urine diagnostics. This review will demonstrate the applicability of paper-based assays for urine analysis and where they may fit into the commercial healthcare market.

Hollow fiber sensor based on metal-cladding waveguide with extended detection range

A new hollow fiber sensor based on metal-cladding waveguide configuration for the detection of the refractive index of liquid is proposed and demonstrated. Due to the existence of both surface and guided modes in the metal-insulator-metal waveguide, the proposed sensor can detect liquid with refractive index either higher or lower than the insulator layer, which significantly extends the detection range. The characteristics of metal-cladding waveguide is analyzed and presented, while the performance of the sensor is numerically calculated and evaluated. The results evince that, the designed fiber sensor can effectively detect both high and low refractive index liquid by respectively exciting surface mode and guided mode.

Tip-Specific Functionalization of Gold Nanorods for Plasmonic Biosensing: Effect of Linker Chain Length

Gold nanorods are promising platforms for label-free biosensing. We have functionalized gold nanorods with biotin thiol linkers of increasing chain length and evaluated their ability in the molecular detection of streptavidin. We have found an unexpected effect of the increase in linker length, which resulted in a substantial improvement of the plasmon response at surface saturation. The plasmon peak shift increased from 5 to 14 nm, i.e., more than twice the response, between the short and long biotin linkers. This effect is observed only for site-selective tip functionalization, whereas for a full biotin coating there is no improvement observed with the linker length. The improved plasmon response for tip functionalization is attributed to low biotin coverage but is directed to the most sensitive regions, which, combined with a longer chain linker, reduces the steric hindrance for streptavidin binding on the rod's surface. The model sensors were further characterized by measuring their dose-response curves and binding kinetic assays. Simulations of the discrete dipole approximation give theoretical plasmon shifts that compare well with the experimental ones for the long linker but not with those of the short linker, thus suggesting that steric hindrance affects the latter. Our results highlight the importance of specifically functionalizing the plasmonic hot spots in nanoparticle sensors with the adequate density of receptors in order to maximize their response.

Dual channel multilayer-coated surface plasmon resonance sensor for dual refractive index range measurements

We present a novel multilayer-coated surface plasmon resonance sensor for dual refractive index range measurements based on a capillary structure. The sensing elements include an internally coated Ag layer and an externally coated bilayer of Au with an overlayer of thin indium tin oxide (ITO). The internal Ag layer was sensitive to higher refractive index (RI) medium while the external Au/ITO layer was sensitive to lower refractive index medium. We evaluated the sensor performance by measuring RI changes in two channels, RI sensitivities were -1951 nm/RIU and 2496 nm/RIU, respectively. This compact, low-cost large RI detection range SPR sensor offers the possibility for wider RI detection range and highly sensitive SPR studies in industry and chemical sensing.

Effects of Interfacial Properties of a Surface Modified Surface Plasmon Resonance Chip on Protein Immobilization Performance

In order to confirm the correlation between interfacial properties of modified surface plasmon resonance (SPR) chips and their SPR responses to immobilized anti-IgG, SPR chips were modified by mercaptoundecanoic acid, poly(ethylene glycol) diacrylate (PEG), PEG-based copolymer and cyclodextrin coupled PEG using self-assembled or radical polymerization methods. The resulting interfacial properties such as film thickness and hydrophilicity were characterized by AFM, elliptic polarization scanners and contact angle meter. Immobilization of human IgG on the modified chips was achieved by EDC/NHS activation through an amide bond. The association between fixed IgG and free anti-IgG was reflected by the variation of SPR responses and the binding ability was evaluated by Langmuir isotherms. As observed, the adsorption between IgG and anti-IgG was affected by the interfacial properties of different modifiers, such that a chip with a thinner and more hydrophilic layer may result in a higher SPR response, producing a larger adsorption equilibrium constant for protein interaction.

Spacer-controlled emission of randomly oriented fluorophores enhanced with surface plasmon-polaritons

In surface plasmon-polariton enhanced fluorescence, the use of spacers is simply understood to control the distance between the fluorescence dyes and metals to avoid quenching. However, the presence of a spacer layer over the metallic surface not only manipulates the quantum yield, but also affects the surface plasmon-polariton resonance, which in turn modifies the florescence excitation rate as well as the far-field radiation pattern of the emission. This study presents a systematic investigation on the spacer-controlled emission of randomly oriented emitters in the Kretschmann configuration, with the full leverage of the coupled transfer matrix, reciprocity and plane-wave decomposition methods. It demonstrates that the introduction of a spacer between the metal film and fluorescence dyes decreases the excitation rate. Furthermore, the excitation rate decreases more for spacers with a higher refractive index due to the reduction of the effective power that goes into the resonance excitation. Combining the excitation rate with the quantum yield and photon-collection efficiency, the detected fluorescence enhancement from either the medium side or substrate side is determined and optimized for the spacer thickness and material. It was found that the highest enhancement of a randomly oriented fluorophore's emission was generally achieved in detection from the substrate side with a low refractive index spacer (e.g. Teflon and SiO₂). In addition, the substrate-side measurements were thought to benefit from highly directional radiation and a more stable enhancement compared to the medium-side measurements. Our results clearly reveal physical insights into the spacer-controlled emission and provide concrete guidance in the design and measurement of fluorescence-based sensing and imaging systems.

Surface Plasmon Resonance Clinical Biosensors for Medical Diagnostics

The design and application of sensors for monitoring biomolecules in clinical samples is a common goal of the sensing research community. Surface plasmon resonance (SPR) and other plasmonic techniques such as localized surface plasmon resonance (LSPR) and imaging SPR are reaching a maturity level sufficient for their application in monitoring biomolecules in clinical samples. In recent years, the first examples for monitoring antibodies, proteins, enzymes, drugs, small molecules, peptides, and nucleic acids in biofluids collected from patients afflicted with a series of medical conditions (Alzheimer's, hepatitis, diabetes, leukemia, and cancers such as prostate and breast cancers, among others) demonstrate the progress of SPR sensing in clinical chemistry. This Perspective reviews the current status of the field, showcasing a series of early successes in the application of SPR for clinical analysis and detailing a series of considerations regarding sensing schemes, exposing issues with analysis in biofluids, and comparing SPR with ELISA, while providing an outlook of the challenges currently associated with plasmonic materials, instrumentation, microfluidics, bioreceptor selection, selection of a clinical market, and validation of a clinical assay for applying SPR sensors to clinical samples. Research opportunities are proposed to further advance the field and transition SPR biosensors from research proof-of-concept stage to actual clinical applications.

Mix and Match: Coassembly of Amphiphilic Dendrimers and Phospholipids Creates Robust, Modular, and Controllable Interfaces

Self-assembly of supramolecular structures has become an attractive means to create new biologically inspired materials and interfaces. We report the first robust hybrid bilayer systems readily coassembled from amphiphilic dendrimers and a naturally occurring phospholipid. Both concentration and generation of the dendrimers have direct impacts on the biophysical properties of the coassemblies. Raising the dendrimer concentration increases the hybrid bilayer stability, while changes in the generation and the concentration of the embedded dendrimers impact the fluidity of the coassembled systems. Multivalent dendrimer amine terminals allow for nondestructive in situ derivatization, providing a convenient approach to decorate and modulate the local environment of the hybrid bilayer. The coassembly of lipid/dendrimer interfaces offers a unique platform for the creation of hybrid systems with modular and precisely controllable behavior for further applications in sensing and drug delivery.

Real-time measurement of small molecules directly in awake, ambulatory animals

The development of a technology capable of tracking the levels of drugs, metabolites, and biomarkers in the body continuously and in real time would advance our understanding of health and our ability to detect and treat disease. It would, for example, enable therapies guided by high-resolution, patient-specific pharmacokinetics (including feedback-controlled drug delivery), opening new dimensions in personalized medicine. In response, we demonstrate here the ability of electrochemical aptamer-based (E-AB) sensors to support continuous, real-time, multihour measurements when emplaced directly in the circulatory systems of living animals. Specifically, we have used E-AB sensors to perform the multihour, real-time measurement of four drugs in the bloodstream of even awake, ambulatory rats, achieving precise molecular measurements at clinically relevant detection limits and high (3 s) temporal resolution, attributes suggesting that the approach could provide an important window into the study of physiology and pharmacokinetics.

A field-deployed surface plasmon resonance (SPR) sensor for RDX quantification in environmental waters

A field-deployable surface plasmon resonance (SPR) sensor is reported for the detection RDX at ppb concentration in environmental samples.

Bioinspired Assemblies and Plasmonic Interfaces for Electrochemical Biosensing

Electrochemical biosensing represents a collection of techniques that may be utilized for capture and detection of biomolecules in both simple and complex media. While the instrumentation and technological aspects play important roles in detection capabilities, the interfacial design aspects are of equal importance, and often, those inspired by nature produce the best results. This review highlights recent material designs, recognition schemes, and method developments as they relate to targeted electrochemical analysis for biological systems. This includes the design of electrodes functionalized with peptides, proteins, nucleic acids, and lipid membranes, along with nanoparticle mediated signal amplification mechanisms. The topic of hyphenated surface plasmon resonance assays is also discussed, as this technique may be performed concurrently with complementary and/or confirmatory measurements. Together, smart materials and experimental designs will continue to pave the way for complete biomolecular analyses of complex and technically challenging systems.

Graphene-enhanced plasmonic nanohole arrays for environmental sensing in aqueous samples

The label-free nature of surface plasmon resonance techniques (SPR) enables a fast, specific, and sensitive analysis of molecular interactions. However, detection of highly diluted concentrations and small molecules is still challenging. It is shown here that in contrast to continuous gold films, gold nanohole arrays can significantly improve the performance of SPR devices in angle-dependent measurement mode, as a signal amplification arises from localized surface plasmons at the nanostructures. This leads consequently to an increased sensing capability of molecules bound to the nanohole array surface. Furthermore, a reduced graphene oxide (rGO) sensor surface was layered over the nanohole array. Reduced graphene oxide is a 2D nanomaterial consisting of sp²-hybridized carbon atoms and is an attractive receptor surface for SPR as it omits any bulk phase and therefore allows fast response times. In fact, it was found that nanohole arrays demonstrated a higher shift in the resonance angle of 250-380% compared to a continuous gold film. At the same time the nanohole array structure as characterized by its diameter-to-periodicity ratio had minimal influence on the binding capacity of the sensor surface. As a simple and environmentally highly relevant model, binding of the plasticizer diethyl phthalate (DEP) via π-stacking was monitored on the rGO gold nanohole array realizing a limit of detection of as low as 20 nM. The concentration-dependent signal change was studied with the best performing rGO-modified nanohole arrays. Compared to continuous gold films a diameter-to-periodicity ratio (D/P) of 0.43 lead to a 12-fold signal enhancement. Finally, the effect of environmental waters on the sensor was evaluated using samples from sea, lake and river waters spiked with analytically relevant amounts of DEP during which significant changes in the SPR signal are observed. It is expected that this concept can be successfully transferred to enhance the sensitivity in SPR sensors.

Surface Plasmon Resonance-Based Fiber Optic Sensors Utilizing Molecular Imprinting

Molecular imprinting is earning worldwide attention from researchers in the field of sensing and diagnostic applications, due to its properties of inevitable specific affinity for the template molecule. The fabrication of complementary template imprints allows this technique to achieve high selectivity for the analyte to be sensed. Sensors incorporating this technique along with surface plasmon or localized surface plasmon resonance (SPR/LSPR) provide highly sensitive real time detection with quick response times. Unfolding these techniques with optical fiber provide the additional advantages of miniaturized probes with ease of handling, online monitoring and remote sensing. In this review a summary of optical fiber sensors using the combined approaches of molecularly imprinted polymer (MIP) and the SPR/LSPR technique is discussed. An overview of the fundamentals of SPR/LSPR implementation on optical fiber is provided. The review also covers the molecular imprinting technology (MIT) with its elementary study, synthesis procedures and its applications for chemical and biological anlayte detection with different sensing methods. In conclusion, we explore the advantages, challenges and the future perspectives of developing highly sensitive and selective methods for the detection of analytes utilizing MIT with the SPR/LSPR phenomenon on optical fiber platforms.

A combined top-down/bottom-up approach to structuring multi-sensing zones on a thin film and the application to SPR sensors

The development of a thin film with well-defined metallic micro/nanostructures, diverse surface functionalities, and superior electronic/optical properties has been a great challenge to researchers seeking an efficient method for the detection of various analytes in chemical and biological sensing applications. Herein, we report a facile and effective approach to the fabrication of an ordered gold island pattern on a glass substrate with contrasted chemical functionalities, which can provide spatially separated sensing zones for multi-detection. In the proposed method, the combination between the micro/nano-imprint lithography and sequential self-assembly approaches exhibited synergistic effects that allowed well-defined structuring and easy surface functionalization in separated sensing zones. Via imprint lithography, the uniform gold islands/glass structure was successfully fabricated from a readily available gold-coated glass film. In addition, a sequential self-assembling strategy and specific chemical-substrate interactions, such as thiol-gold and silane-glass, enabled the surfaces of gold islands and exposed portions of the glass substrate with contrasting chemical functionalities-SH-functionalized gold islands and NH2-functionalized glass substrate. A proof-of-concept experiment for the multi-detection of heavy metal ions (Hg(2+) and Cu(2+)) in an aqueous media was also successfully conducted using the dual-functionalized gold islands/glass structure and surface plasmon resonance measurements. The SH groups on the gold islands and the NH2 groups on the glass substrate functioned as spatially separated and selective receptors for Hg(2+) and Cu(2+) ions, respectively. Therefore, both the detection and quantification of Hg(2+) and Cu(2+) ions could be achieved using a single sensing substrate.

SPR and SPR Imaging: Recent Trends in Developing Nanodevices for Detection and Real-Time Monitoring of Biomolecular Events

In this paper we review the underlying principles of the surface plasmon resonance (SPR) technique, particularly emphasizing its advantages along with its limitations regarding the ability to discriminate between the specific binding response and the interfering effects from biological samples. While SPR sensors were developed almost three decades, SPR detection is not yet able to reduce the time-consuming steps of the analysis, and is hardly amenable for miniaturized, portable platforms required in point-of-care (POC) testing. Recent advances in near-field optics have emerged, resulting in the development of SPR imaging (SPRi) as a powerful optical, label-free monitoring tool for multiplexed detection and monitoring of biomolecular events. The microarrays design of the SPRi chips incorporating various metallic nanostructures make these optofluidic devices more suitable for diagnosis and near-patient testing than the traditional SPR sensors. The latest developments indicate SPRi detection as being the most promising surface plasmon-based technique fulfilling the demands for implementation in lab-on-a-chip (LOC) technologies.

Liquid crystal filled surface plasmon resonance thermometer

A novel surface plasmon resonance (SPR) thermometer based on liquid crystal (LC) filled hollow fiber is demonstrated in this paper. A hollow fiber was internally coated with silver and then filled with LC. The SPR response to temperature was studied using modeling and verified experimentally. The results demonstrated that the refractive index of LC decreases with the increasing temperature and the variation can be detected by the resonance wavelength shift of the plasmon resonance. The temperature sensitivities were 4.72 nm/°C in the temperature range of 20 to 34.5 °C and 0.55 nm/°C in the temperature range of 36 to 50 °C, At the phase transition temperature between nematic and isotropic phases of the LC, the temperature sensitivity increased by one order of magnitude and a shift of more than 46 nm was observed with only a 1.5 °C temperature change. This sensor can be used for temperature monitoring and alarming, and can be extended for other physical parameter measurement.

On-line coupling of surface plasmon resonance optical sensing to size-exclusion chromatography for affinity assessment of antibody samples

Surface plasmon resonance (SPR) is an optical technique that measures biomolecular interactions. Stand-alone SPR cannot distinguish different binding components present in one sample. Moreover, sample matrix components may show non-specific binding to the sensor surface, leading to detection interferences. This study describes the development of coupled size-exclusion chromatography (SEC) SPR sensing for the separation of sample components prior to their on-line bio-interaction analysis. A heterogeneous polyclonal human serum albumin antibody (anti-HSA) sample, which was characterized by proteomics analysis, was used as test sample. The proposed SEC-SPR coupling was optimized by studying system parameters, such as injection volume, flow rate and sample concentration, using immobilized HSA on the sensor chip. Automated switch valves were used for on-line regeneration of the SPR sensor chip in between injections and for potential chromatographic heart cutting experiments, allowing SPR detection of individual components. The performance of the SEC-SPR system was evaluated by the analysis of papain-digested anti-HSA sampled at different incubation time points. The new on-line SEC-SPR methodology allows specific label-free analysis of real-time interactions of eluting antibody sample constituents towards their antigenic target.

A metal-responsive interdigitated bilayer for selective quantification of mercury(ii) traces by surface plasmon resonance

An innovative design of reusable SPR chips allowing the quantitative and selective determination of mercury(ii) at the ppt level is reported.

Microdialysis SPR: diffusion-gated sensing in blood

Chemical measurements are rarely performed in crude blood due to the poor performance of sensors and devices exposed to biofluids. In particular, biosensors have been severely limited for detection in whole blood due to surface fouling from proteins, the interaction of cells with the sensor surface and potential optical interference when considering optical methods of analysis. To solve this problem, a dialysis chamber was introduced to a surface plasmon resonance (SPR) biosensor to create a diffusion gate for large molecules. This dialysis chamber relies on the faster migration of small molecules through a microporous membrane towards a sensor, located at a specified distance from the membrane. Size filtering and diffusion through a microporous membrane restricted the access of blood cells and larger biomolecules to a sensing chamber, while smaller, faster diffusing biomolecules migrated preferentially to the sensor with limited interference from blood and serum. The affinity of a small peptide (DBG178) with anti-atherosclerotic activity and targeting type B scavenger receptor CD36 was successfully monitored at micromolar concentrations in human serum and blood without any pre-treatment of the sample. This concept could be generally applied to a variety of targets for biomolecular interaction monitoring and quantification directly in whole blood, and could find potential applications in biochemical assays, pharmacokinetic drug studies, disease treatment monitoring, implantable plasmonic sensors, and point-of-care diagnostics.

Long-range surface plasmon resonance sensor based on dielectric/silver coated hollow fiber with enhanced figure of merit

A long-range surface plasmon resonance (LRSPR) sensor based on dielectric/silver-coated hollow fiber (HF) is proposed. It can detect the refractive index (RI) of sensed liquid filled in the hollow core of the sensor. A HF LRSPR sensor with 90-nm-thick silver layer and 260-nm-thick OC300 layer is fabricated. Experiments are taken to evaluate the performance of the sensor by measuring the transmission spectra. Theoretical analysis based on a ray model is also taken, and the results agree well with the experimental results. The proposed sensor has similar sensitivity but much smaller SPR dip width than the silver-coated HF SPR sensor. Thus figure of merit of the sensor is enhanced approximately five times. The stability of the sensor is also improved because the dielectric layer acts as a protection layer for the damageable silver layer.

Label-free optical biosensors based on aptamer-functionalized porous silicon scaffolds

A proof-of-concept for a label-free and reagentless optical biosensing platform based on nanostructured porous silicon (PSi) and aptamers is presented in this work. Aptamers are oligonucleotides (single-stranded DNA or RNA) that can bind their targets with high affinity and specificity, making them excellent recognition elements for biosensor design. Here we describe the fabrication and characterization of aptamer-conjugated PSi biosensors, where a previously characterized his-tag binding aptamer (6H7) is used as model system. Exposure of the aptamer-functionalized PSi to the target proteins as well as to complex fluids (i.e., bacteria lysates containing target proteins) results in robust and well-defined changes in the PSi optical interference spectrum, ascribed to specific aptamer-protein binding events occurring within the nanoscale pores, monitored in real time. The biosensors show exceptional stability and can be easily regenerated by a short rinsing step for multiple biosensing analyses. This proof-of-concept study demonstrates the possibility of designing highly stable and specific label-free optical PSi biosensors, employing aptamers as capture probes, holding immense potential for application in detection of a broad range of targets, in a simple yet reliable manner.

Antifouling property of monothiol-terminated bottle-brush poly(methylacrylic acid)-graft-poly(2-methyl-2-oxazoline) copolymer on gold surfaces

A series of well-controlled bottle-brush poly(methylacrylic acid)-graft-poly(2-methyl-2-oxazoline) copolymers were grafted to gold surfaces through an in situ aminolysis reaction to reduce protein adsorption and platelet adhesion.

Metal-enhanced fluorescence and FRET on nanohole arrays excited at angled incidence

The influence of experimental parameters on the performance of plasmonic sensors is of great importance in analytical sciences.

Controlled amino-functionalization by electrochemical reduction of bromo and nitro azobenzene layers bound to Si(111) surfaces

4-Nitrobenzenediazonium (4-NBD) and 4-bromobenzenediazonium (4-BBD) salts were grafted electrochemically onto H-terminated, p-doped silicon (Si) surfaces. Atomic force microscopy (AFM) and ellipsometry experiments clearly showed layer thicknesses of 2-7 nm, which indicate multilayer formation. Decreasing the diazonium salt concentration and the reaction time resulted in a smaller layer thickness, but did not prevent the formation of multilayers. It was demonstrated, mainly by X-ray photoelectron spectroscopy (XPS), that the diazonium salts not only react with the H-terminated Si surface, but also with electrografted phenyl groups via azo-bond formation. These azo bonds can be electrochemically reduced at Ered = -1.5 V, leading to the corresponding amino groups. This reduction resulted in a modest decrease in layer thickness, and did not yield monolayers. This indicates that other coupling reactions, notably a biphenyl coupling, induced by electrochemically produced phenyl radicals, take place as well. In addition to the azo functionalities, the nitro functionalities in electrografted layers of 4-NBD were independently reduced to amino functionalities at a lower potential (Ered = -2.1 V). The presence of amino functionalities on fully reduced layers, both from 4-NBD- and 4-BBD-modified Si, was shown by the presence of fluorine after reaction with trifluoroacetic anhydride (TFAA). This study shows that the electrochemical reduction of azo bonds generates amino functionalities on layers produced by electrografting of aryldiazonium derivatives. In this way multifunctional layers can be formed by employing functional aryldiazonium salts, which is believed to be very practical in the fabrication of sensor platforms, including those made of multi-array silicon nanowires.

Nanoscale controlled architecture for development of ultrasensitive lectin biosensors applicable in glycomics

In this Minireview the most advanced patterning protocols and transducing schemes for development of ultrasensitive label-free and label-based lectin biosensors for glycoprofiling of disease markers and some cancerous cells are described. Performance of such lectin biosensors with interfacial properties tuned at a nanoscale are critically compared to the most sensitive immunoassay format of analysis and challenges ahead in the field are discussed. Moreover, key elements for future advances of such devices on the way to enhance robustness and practical applicability of lectin biosensors are revealed.

Determination of exosome concentration in solution using surface plasmon resonance spectroscopy

Exosomes are cell-secreted nanometer-sized extracellular vesicles that have been reported to play an important role in intercellular communication. They are also considered potential diagnostic markers for various health disorders, and intense investigations are presently directed toward their use as carriers in drug-delivery and gene-therapy applications. This has generated a growing need for sensitive methods capable of accurately and specifically determining the concentration of exosomes in complex biological fluids. Here, we explore the use of label-free surface-based sensing with surface plasmon resonance (SPR) read-out to determine the concentration of exosomes in solution. Human mast cell secreted exosomes carrying the tetraspanin membrane protein CD63 were analyzed by measuring their diffusion-limited binding rate to an SPR sensor surface functionalized with anti-CD63 antibodies. The concentration of suspended exosomes was determined by first converting the SPR response into the surface-bound mass. The increase in mass uptake over time was then related to the exosome concentration in solution using a formalism describing diffusion-limited binding under controlled flow conditions. The proposed quantification method is based on a calibration and control measurements performed with proteins and synthetic lipid vesicles and takes into account (i) the influence of the broad size distribution of the exosomes on the surface coverage, (ii) the fact that their size is comparable to the ∼150 nm probing depth of SPR, and (iii) possible deformation of exosomes upon adsorption. Under those considerations, the accuracy of the concentration determination was estimated to be better than ±50% and significantly improve if the exosome deformation is negligible.

Passivated aluminum nanohole arrays for label-free biosensing applications

We report the fabrication and performance of a surface plasmon resonance aluminum nanohole array refractometric biosensor. An aluminum surface passivation treatment based on oxygen plasma is developed in order to circumvent the undesired effects of oxidation and corrosion usually found in aluminum-based biosensors. Immersion tests in deionized water and device simulations are used to evaluate the effectiveness of the passivation process. A label-free bioassay based on biotin analysis through biotin-functionalized dextran-lipase conjugates immobilized on the biosensor-passivated surface in aqueous media is performed as a proof of concept to demonstrate the suitability of these nanostructured aluminum films for biosensing.

Hollow fiber surface plasmon resonance sensor for the detection of liquid with high refractive index

A new kind of surface plasmon resonance (SPR) sensor based on silver-coated hollow fiber (HF) structure for the detection of liquids with high refractive index (RI) is presented. Liquid sensed medium with high RI is filled in the hollow core of the HF and its RI can be detected by measuring the transmission spectra of the HF SPR sensor. The designed sensors with different silver thicknesses are fabricated and the transmission spectra for filled liquids with different RI are measured to investigate the performances of the sensors. Theoretical analysis is also carried out to evaluate the performance. The simulation results agree well with the experimental results. Factors that might affect sensitivity and detection accuracy of the sensor are discussed. The highest sensitivity achieved is 6,607 nm/RIU, which is comparable to the sensitivities of the other reported fiber SPR sensors.