Metal-Based Electrocatalysts for Methanol Electro-Oxidation: Progress, Opportunities, and Challenges

Direct methanol fuel cells (DMFCs) are among the most promising portable power supplies because of their unique advantages, including high energy density/mobility of liquid fuels, low working temperature, and low emission of pollutants. Various metal-based anode catalysts have been extensively studied and utilized for the essential methanol oxidation reaction (MOR) due to their superior electrocatalytic performance. At present, especially with the rapid advance of nanotechnology, enormous efforts have been exerted to further enhance the catalytic performance and minimize the use of precious metals. Constructing multicomponent metal-based nanocatalysts with precisely designed structures can achieve this goal by providing highly tunable compositional and structural characteristics, which is promising for the modification and optimization of their related electrochemical properties. The recent advances of metal-based electrocatalytic materials with rationally designed nanostructures and chemistries for MOR in DMFCs are highlighted and summarized herein. The effects of the well-defined nanoarchitectures on the improved electrochemical properties of the catalysts are illustrated. Finally, conclusive perspectives are provided on the opportunities and challenges for further refining the nanostructure of metal-based catalysts and improving electrocatalytic performance, as well as the commercial viability.

Oxygen Reduction Reaction Catalyzed by Carbon-Supported Platinum Few-Atom Clusters: Significant Enhancement by Doping of Atomic Cobalt

Oxygen reduction reaction (ORR) plays an important role in dictating the performance of various electrochemical energy technologies. As platinum nanoparticles have served as the catalysts of choice towards ORR, minimizing the cost of the catalysts by diminishing the platinum nanoparticle size has become a critical route to advancing the technological development. Herein, first-principle calculations show that carbon-supported Pt₉ clusters represent the threshold domain size, and the ORR activity can be significantly improved by doping of adjacent cobalt atoms. This is confirmed experimentally, where platinum and cobalt are dispersed in nitrogen-doped carbon nanowires in varied forms, single atoms, few-atom clusters, and nanoparticles, depending on the initial feeds. The sample consisting primarily of Pt_2~7 clusters doped with atomic Co species exhibits the best mass activity among the series, with a current density of 4.16 A mg_Pt ^-1 at +0.85 V vs. RHE that is almost 50 times higher than that of commercial Pt/C.

Applications of Low-Melting-Point Metals in Rechargeable Metal Batteries

Low-melting-point (LMP) metals represent an interesting family of electrode materials owing to their high ionic conductivity, good ductility or fluidity, low hardness and/or superior alloying capability, all of which are crucial characteristics to address battery challenges such as interfacial incompatibility, electrode pulverization, and dendrite growth. This minireview summarizes recent research progress of typical LMP metals including In, Ga, Hg, and their alloys in rechargeable metal batteries. Emphasis is placed on mainstream electrochemical storage devices of Li, Na, and K batteries as well as the representative multi-valent metal batteries. The fundamental correlations between unique physiochemical properties of LMP metals and the battery performance are highlighted. In addition, this article also provides insights into future development and potential directions of LMP metals/alloys for practical applications.

Self-driven microstructural evolution of Au@Pd core-shell nanoparticles for greatly enhanced catalytic performance during methanol electrooxidation

The lack of direct insight into the microstructural evolution of catalytic materials under electrochemical polarization has inhibited the development of heterogeneous catalysts. By investigating a typical Au@Pd core-shell nanostructure, the present study discloses the microstructural evolution of heterogeneous catalytic materials during the methanol electrooxidation reaction (MOR). The electrocatalytic activity of the as-prepared Au@Pd_core-shell nanoparticles continuously increased during the first 100 successive voltammetry cycles of the MOR. Microstructural characterization studies revealed that during the MOR, an Au/Pd mixed bimetallic shell was formed by the self-driven microstructural evolution of the Au@Pd_core-shell nanoparticles. Both the experimental and calculation results indicated that the Au/Pd mixed bimetallic shell reduced the binding strength of OH^- and CO on the catalyst surface. The exposed Au atoms in the shell region also produced large-scale reactive ˙OH radicals that facilitated the oxidative removal of the adsorbed carbonaceous species from the adjacent Pd active sites.

Nanocomposites based on quasi-networked Au1.5Pt1Co1 ternary alloy nanoparticles and decorated with poly-L-cysteine film for the electrocatalytic application of hydroquinone sensing

A mildly one-pot method is developed for the synthesis of quasi-networked Au_1.5Pt₁Co₁ ternary alloy nanoparticles (TANPs) at room temperature through the co-reduction of AuCl₄^-, PtCl₆^- and Co²⁺ with hydrazine hydrate. Characterizations of XRD, XPS, HRTEM, EDS and SAED successfully reveal the crystal structure, composition, valence and morphology of Au_1.5Pt₁Co₁ TANPs, respectively. The glassy carbon electrode (GCE) modified by Au_1.5Pt₁Co₁ TANPs with good dispersion and multi-density surface defects occupies the optimal electrochemical active surface area (ECSA). After the coated poly-L-cysteine (P-L-Cys) film on the Au_1.5Pt₁Co₁/GCE surface, the morphology, element mapping and surface roughness of the P-L-Cys/Au_1.5Pt₁Co₁/GCE are investigated via FESEM and AFM to verify continuous electrode modification processes. The electrochemical behaviors of the composite electrode for hydroquinone (HQ) are evaluated by cyclic voltammetry (CV) with interfacial properties of adsorption and diffusion. Differential pulse voltammetry (DPV) for HQ electrochemical sensing at 0.10 V (vs. SCE) exhibits two linear response ranges from 0.1 to 30 and 30-200 μM, respectively. A low detection limit (S/N = 3) of 0.045 μM is obtained with a sensitivity of 4.247 μA μM^-1·cm^-2. The resulting P-L-Cys/Au_1.5Pt₁Co₁/GCE also presents ascendant selectivity, repeatability, reproducibility and stability. In addition, the established method is applied to the assessment of the HQ level in real water samples (mineral water, tap water and lake water) with the satisfactory results of spiked recoveries. The sensor may become a promising tool for the trace analysis of the electroactive substance in food or environmental samples.

Noble Metal Aerogels

Noble metal-based nanomaterials have been a hot research topic during the past few decades. Particularly, self-assembled porous architectures have triggered tremendous interest. At the forefront of porous nanostructures, there exists a research endeavor of noble metal aerogels (NMAs), which are unique in terms of macroscopic assembly systems and three-dimensional (3D) porous network nanostructures. Combining excellent features of noble metals and the unique structural traits of porous nanostructures, NMAs are of high interest in diverse fields, such as catalysis, sensors, and self-propulsion devices. Regardless of these achievements, it is still challenging to rationally design well-tailored NMAs in terms of ligament sizes, morphologies, and compositions and profoundly investigate the underlying gelation mechanisms. Herein, an elaborate overview of the recent progress on NMAs is given. First, a simple description of typical synthetic methods and some advanced design engineering are provided, and then, the gelation mechanism models of NMAs are discussed in detail. Furthermore, promising applications particularly focusing on electrocatalysis and biosensors are highlighted. In the final section, brief conclusions and an outlook on the existing challenges and future chances of NMAs are also proposed.

Laser-Based Synthesis of Au Nanoparticles for Optical Sensing of Glyphosate: A Preliminary Study

Nowadays, gold nanoparticles Au nanoparticles (AuNPs) capture great interest due to their chemical stability, optical properties and biocompatibility. The success of technologies based on the use of AuNPs implies the development of simple synthesis methods allowing, also, the fine control over their properties (shape, sizes, structure). Here, we present the AuNPs fabrication by nanosecond pulsed laser ablation in citrate-solution, that has the advantage of being a simple, economic and eco-sustainable method to fabricate colloidal solutions of NPs. We characterized the stability and the absorbance of the solutions by Ultraviolet-Visible (UV-Vis) spectroscopy and the morphology of the AuNPs by Transmission Electron Microscopy. In addition, we used the AuNPs solutions as colorimetric sensor to detect the amount of glyphosate in liquid. Indeed, glyphosate is one of the most widely used herbicides which intensive use represents a risk to human health. The glyphosate presence in the colloidal AuNPs solutions determines the aggregation of the AuNPs causing the change in the color of the solution. The variation of the optical properties of the colloidal solutions versus the concentration of glyphosate is studied.

Quasi-metal Microwave Route to MoN and Mo2C Ultrafine Nanocrystalline Hollow Spheres as Surface-Enhanced Raman Scattering Substrates

MoN and Mo₂C are important functional materials; however, due to the high activation energy barrier in their nucleation, their synthesis generally requires harsh conditions such as high temperature (>1000 °C) and high pressure (several GPa). The extreme conditions also hinder the acquisition of their ultrafine nanostructures. Herein, we report that MoN and Mo₂C hollow spheres with large surface area (108.7-125.6 m² g^-1) and ultrafine nanoparticles (2-5 nm) are prepared by a quasi-metal-based microwave route under mild conditions. MoO₂ hollow spheres are used as a quasi-metallic microwave absorbing medium as well as a molybdenum source and template simultaneously. The MoN and Mo₂C ultrafine nanocrystalline hollow spheres exhibit strong localized surface plasmon resonance, high photothermal conversion efficiency, and strong surface-enhanced Raman scattering effects. Highly crystalline MoS₂ nanosheet hollow spheres can also be obtained by this method, indicating its universality. The present work provides an effective strategy for the rapid and mild preparation of ultrafine nanocrystalline transition metal nitrides and carbides with ultrahigh activation energy.

Bromide Ions Triggered Synthesis of Noble Metal-Based Intermetallic Nanocrystals

Ordered intermetallic nanomaterials with a well-defined crystal structure and fixed stoichiometry facilitate the predictable control of their electronic structure and catalytic performance. To obtain the thermodynamically stable intermetallic structures, the conventional approaches with high-temperature annealing are still far from satisfactory, because of annealing-induced aggregation and sintering of nanomaterials. Herein, a general wet-chemical method is developed to synthesize a series of noble metal-based intermetallic nanocrystals, including hexagonal close-packed (hcp) PtBi nanoplates, face-centered cubic (fcc) Pd₃ Pb nanocubes, and hcp Pd_2.5 Bi_1.5 nanoparticles. During the synthetic process, Br^- ions play two important roles for the formation of ordered intermetallic structures: i) Br^- ions can coordinate with the metal ions to decrease their reduction potentials thus slowing down the reduction kinetics. ii) Br^- ions can combine with molecular oxygen to generate an oxidative etching effect, hence reconstructing the atom arrangement, which is beneficial for the formation of the intermetallic structure. As a proof-of-concept application, Pd₃ Pb nanocubes are used as electrocatalysts for ethanol and methanol oxidation reactions, which exhibit significantly improved electrochemical performance compared with the commercial Pd black catalyst.

O2 activation by core-shell Ru13@Pt42 particles in comparison with Pt55 particles: a DFT study

The reaction of O₂ with a Ru₁₃@Pt₄₂ core-shell particle consisting of a Ru₁₃ core and a Pt₄₂ shell was theoretically investigated in comparison with Pt₅₅. The O₂ binding energy with Pt₅₅ is larger than that with Ru₁₃@Pt₄₂, and O-O bond cleavage occurs more easily with a smaller activation barrier (E _a) on Pt₅₅ than on Ru₁₃@Pt₄₂. Protonation to the Pt₄₂ surface followed by one-electron reduction leads to the formation of an H atom on the surface with considerable exothermicity. The H atom reacts with the adsorbed O₂ molecule to afford an OOH species with a larger E _a value on Pt₅₅ than on Ru₁₃@Pt₄₂. An OOH species is also formed by protonation of the adsorbed O₂ molecule, followed by one-electron reduction, with a large exothermicity in both Pt₅₅ and Ru₁₃@Pt₄₂. O-OH bond cleavage occurs with a smaller E _a on Pt₅₅ than on Ru₁₃@Pt₄₂. The lower reactivity of Ru₁₃@Pt₄₂ than that of Pt₅₅ on the O-O and O-OH bond cleavages arises from the presence of lower energy in the d-valence band-top and d-band center in Ru₁₃@Pt₄₂ than in Pt₅₅. The smaller E _a for OOH formation on Ru₁₃@Pt₄₂ than on Pt₅₅ arises from weaker Ru₁₃@Pt₄₂-O₂ and Ru₁₃@Pt₄₂-H bonds than the Pt₅₅-O₂ and Pt₅₅-H bonds, respectively. The low-energy d-valence band-top is responsible for the weak Ru₁₃@Pt₄₂-O and Ru₁₃@Pt₄₂-OH bonds. Thus, the low-energy d-valence band-top and d-band center are important properties of the Ru₁₃@Pt₄₂ particle.

Assembly of Bimetallic PdAg Nanosheets and Their Enhanced Electrocatalytic Activity toward Ethanol Oxidation

The direct ethanol fuel cells in an alkaline medium have a broad vision of applications because of their large energy density, reasonable power density, and environmentally friendly features. Herein, we present a facile one-step method to synthesize PdAg nanosheet assemblies (NSAs) in a mixed solution of N,N-dimethylformamide and water with the addition of molybdenum hexacarbonyl and cetyltrimethylammonium bromide. Pure Pd NSA shows an irregular shape while PdAg NSAs gradually undergo a process from solid assembly to a hollow structure with the Pd/Ag molar ratio changing from 3:1 to 2:1 to 1:1. The formation of alloy nanosheets in the assemblies combined with the introduction of Ag in the Pd catalyst enhances the catalytic activity toward ethanol electrooxidation from 1524 mA mg^-1 of pure Pd NSA to 1866 mA mg^-1 of PdAg NSA with a Pd/Ag molar ratio of 2:1. On the basis of the experimental data, compared with pure Pd structures, both the nature of a thin nanosheet of PdAg NSAs and the structural changes in the alloy assemblies play key roles in determining the electrocatalytic activity of these Pd-based catalysts.

Atomically precise alloy nanoclusters: syntheses, structures, and properties

Metal nanoclusters fill the gap between discrete atoms and plasmonic nanoparticles, providing unique opportunities for investigating the quantum effects and precise structure-property correlations at the atomic level. As a versatile strategy, alloying can largely improve the physicochemical performances compared to the corresponding homo-metal nanoclusters, and thus benefit the applications of such nanomaterials. In this review, we highlight the achievements of atomically precise alloy nanoclusters, and summarize the alloying principles and fundamentals, including the synthetic methods, site-preferences for different heteroatoms in the templates, and alloying-induced structure and property changes. First, based on various Au or Ag nanocluster templates, heteroatom doping modes are presented. The templates with electronic shell-closing configurations tend to maintain their structures during doping, while the others may undergo transformation and give rise to alloy nanoclusters with new structures. Second, alloy nanoclusters of specific magic sizes are reviewed. The arrangement of different atoms is related to the symmetry of the structures; that is, different atoms are symmetrically located in the nanoclusters of smaller sizes, and evolve into shell-by-shell structures at larger sizes. Then, we elaborate on the alloying effects in terms of optical, electrochemical, electroluminescent, magnetic and chiral properties, as well as the stability and reactivity via comparisons between the doped nanoclusters and their homo-metal counterparts. For example, central heteroatom-induced photoluminescence enhancement is emphasized. The applications of alloy nanoclusters in catalysis, chemical sensing, bio-labeling, and other fields are further discussed. Finally, we provide perspectives on existing issues and future efforts. Overall, this review provides a comprehensive synthetic toolbox and controllable doping modes so as to achieve more alloy nanoclusters with customized compositions, structures, and properties for applications. This review is based on publications available up to February 2020.

Intrinsic Effect of Carbon Supports on the Activity and Stability of Precious Metal Based Catalysts for Electrocatalytic Alcohol Oxidation in Fuel Cells: A Review

Electrocatalyst supports, in particular carbonaceous materials, play critical roles in the electrocatalytic activity and stability of precious metal group (PMG)-based catalysts such as Pt, Pd, and Au for the electrochemical alcohol oxidation reaction (AOR) of fuels such as methanol and ethanol in polymer electrolyte membrane fuel cells (PEMFCs). Carbonaceous supports such as high surface area carbon provide electronic contact throughout the catalyst layer, isolate PMG nanoparticles (NPs) to maintain high electrochemical surface area, and provide hydrophobic properties to avoid flooding of the catalyst layer by liquid water produced. Compared to high surface area carbon, PMG catalysts supported on 1D and 2D carbon materials such as graphene and carbon nanotubes show enhanced activity and durability due to the intrinsic effect of the underlying carbonaceous supports on the electronic states of PMG NPs. The modification of the electronic environment, in particular the d-band centers of PMG NPs, weakens the adsorption of AOR intermediates, facilitates breaking of the C-C bonds, and thus enhances the electrocatalytic activity of PMG catalysts. The doping of heteroatoms further facilitates the electrocatalytic activity for the AOR through the structural, bifunctional, and electronic effects, in addition to the enhanced dispersion of PMG NPs in the carbon support. The prospects for the development of effective PMG-based catalysts for high-performance alcohol-fuel-based PEMFCs is discussed.

CuS-NiS2 nanomaterials for MRI guided phototherapy of gastric carcinoma via triggering mitochondria-mediated apoptosis and MLKL/CAPG-mediated necroptosis

Gastric carcinoma is one of the most lethal malignant tumors. As part of our long-term efforts on seeking effective diagnosis and therapeutic strategies of gastric cancer, we present herein novel ternary copper-based chalcogenide nanoplatform CuS-NiS₂ nanomaterials with outstanding photothermal (PT)/photodynamic (PD) property that could effectively suppress human gastric cancer in vitro and in vivo without obvious side effects. We revealed that CuS-NiS₂ induced reactive oxygen species (ROS) generation, leading to apoptosis through Bcl-2/Bax pathway of human gastric cancer cells under 808 nm near-infrared (NIR) irradiation. In addition, we also confirmed that the combination of CuS-NiS₂ and 808 nm NIR laser treatment triggered necroptosis by regulating the novel pathway MLKL/CAPG of human gastric cancer cells. Moreover, the CuS-NiS₂ exhibited excellent contrast enhancement according to magnetic resonance imaging (MRI). Taken together, we reported new ternary copper-based chalcogenide nanomaterials CuS-NiS₂, which could be successfully applied for MRI-guided PT/PD therapy of gastric carcinoma through mitochondria-mediated apoptosis and MLKL/CAPG-mediated necroptosis.

Eutectic Synthesis of High-Entropy Metal Phosphides for Electrocatalytic Water Splitting

High-entropy materials, a new class of alloys that incorporate five or more principal elements into single-phase crystal structures, have received considerable interest in materials science and engineering. Considering the tailored composition and disordered configuration, these high-entropy materials may arouse functional synergism towards electrocatalysis. Here, a new strategy for preparing high-entropy metal phosphides (HEMPs) was developed by a eutectic solvent method. The as-prepared HEMP possessed a single metal phosphide phase with up to five homogenously distributed metal components. The versatile application of high-entropy materials was highlighted by integrating the HEMP catalyst into a two-electrode configuration for electrocatalytic water splitting.

Ultrathin Pd-based nanosheets: syntheses, properties and applications

Two-dimensional (2D) noble metal-based nanosheets (NSs) have received considerable interest in recent years due to their unique properties and widespread applications. Pd-based NSs, as a typical member of 2D noble metal-based NSs, have been most extensively studied. In this review, we first summarize the research progress on the synthesis of Pd-based NSs, including pure Pd NSs, Pd-based alloy NSs, Pd-based core-shell NSs and Pd-based hybrid NSs. The synthetic strategy and growth mechanism are systematically discussed. Then their properties and applications in catalysis, biotherapy, gas sensing and so on are introduced in detail. Finally, the challenges and opportunities towards the rational design and controlled synthesis of Pd-based NSs are proposed.

A layer-by-layer strategy for the scalable preparation of uniform interfacial electrocatalysts with high structural tunability: a case study of a CoNP/N,P-graphene catalyst complex

Electrocatalysts are important for providing clean energy and have attracted intense research attention. All electrocatalysts must function on electrode surfaces; however, interfacial engineering strategies for electrocatalytic structures remain understudied, and scalable preparation methods are especially rare. In this study, we propose a strategy that employs a layer-by-layer (LbL) assembly, subsequent in-film deposition, and calcination to prepare a complex Co nanoparticle (CoNP)/N,P-graphene catalyst on various 2D and 3D electrode surfaces. We delicately adjusted a variety of parameters and demonstrated that our LbL-based method can finely tune the total amount, the doping fraction, and the electronic structure of the complex catalysts, and provide optimal catalytic performance. When prepared on a large piece of carbon cloth, the catalysts showed a highly uniform catalytic performance, demonstrating the capability of our method for scalable fabrication. Our study emphasizes the delicate nature of the interfacial engineering of electrocatalysts, and promotes functional interface design and mechanism studies.

A facile solvothermal synthesis of Pt1.2Co/C bimetallic nanocrystals as efficient electrocatalysts for methanol oxidation and hydrogen evolution reaction

A bimetallic alloyed Pt_1.2Co/C catalyst, which exhibited superior electrocatalytic performance for both MOR and HER, was synthesized by a one-pot solvothermal approach.

Hydrothermal control, characterization, growth mechanism, and photoluminescence properties of highly crystalline 1D Eu(OH)3 nanostructures

Six types of 1D Eu(OH)₃ nanostructures with typical morphologies, including short hexagonal prism, long hexagonal prism, coiling rod, short rod, long rod, and nanobunch, were synthesized via the hydrothermal route using EuCl₃ and NaOH as raw materials. The morphologies, sizes, structures, and compositions of the as-prepared products were characterized by scanning electron microscopy, transmission electron microscopy, selected area electron diffraction, X-ray diffraction, and Fourier transform infrared spectroscopy. The effects of different reaction conditions on the morphology and size of the products were also investigated, and the relevant growth mechanism was assessed. Results showed that the geometric features of Eu(OH)₃ are affected by the precursor pH and reaction time and temperature; among these factors, precursor pH played a key role in controlling the morphologies of the resulting Eu(OH)₃ nanostructures. The fluorescence properties of the six Eu(OH)₃ nanostructures were analyzed, and typical photoluminescence emission peaks due to the ⁵D₀–⁷F_J (J = 1–4) transition of Eu³⁺ were noted. Moreover, the intensity of the emission peak of the products at 616 nm was slightly weaker than that at 592 nm. This finding reflects the high site symmetry of Eu³⁺ in the Eu(OH)₃ nanostructures.

Six types of 1D Eu(OH)₃ nanostructures with typical morphologies, including short hexagonal prism, long hexagonal prism, coiling rod, short rod, long rod, and nanobunch, were synthesized via the hydrothermal route using EuCl₃ and NaOH as materials.

Shape-controlled synthesis of planar PtPb nanoplates for highly efficient methanol electro-oxidation reaction

In this work, novel insights into the influence of different nanocrystal structures on the electrocatalytic oxidation of methanol are reported. Herein, we have successfully prepared high-yield PtPb nanoplates in the diethylene glycol (DEG) solvent. The as-obtained PtPb nanoplates with a large surface area of the (102) facet show higher MOR activity and superior durability in alkaline electrolyte compared with both zero-dimensional PtPb nanoparticles and commercial Pt/C. Further chronoamperometric (CA) measurements and discrete Fourier transform (DFT) calculations indicate that the PtPb nanoplates possess much better operation durability and CO tolerance due to the negative adsorption energy of the (102) facet.

Bifunctional PtCu electrocatalysts for the N2 reduction reaction under ambient conditions and methanol oxidation

PtCu nanoalloys were employed as bifunctional electrocatalysts in both the N₂ reduction and methanol oxidation, in which the electrocatalytic activity and stability is composition dependent and highly improved compared to their counterpart.

Synthesis of PdM (M = Zn, Cd, ZnCd) Nanosheets with an Unconventional Face-Centered Tetragonal Phase as Highly Efficient Electrocatalysts for Ethanol Oxidation

Recently, crystal-phase engineering has been emerging as a promising strategy to tune the physicochemical properties of noble metal catalysts and further improve their catalytic performance. However, the synthesis of noble metal catalysts with an unconventional crystal phase as well as desired composition and morphology still remains a great challenge. Herein, a series of PdM (M = Zn, Cd, ZnCd) nanosheets (NSs) with thickness less than 5 nm have been synthesized via a facile one-pot wet-chemical method. In particular, different from the conventional face-centered cubic (fcc) phase, PdM NSs possess an unconventional face-centered tetragonal (fct) phase. As a proof-of-concept application, the fct PdZn NSs exhibit significantly enhanced mass activity and stability in ethanol oxidation reaction, compared to the pure Pd NSs and commercial Pd black catalyst.

Nanowire Genome: A Magic Toolbox for 1D Nanostructures

1D nanomaterials with high aspect ratio, i.e., nanowires and nanotubes, have inspired considerable research interest thanks to the fact that exotic physical and chemical properties emerge as their diameters approach or fall into certain length scales, such as the wavelength of light, the mean free path of phonons, the exciton Bohr radius, the critical size of magnetic domains, and the exciton diffusion length. On the basis of their components, aspect ratio, and properties, there may be imperceptible connections among hundreds of nanowires prepared by different strategies. Inspired by the heredity system in life, a new concept termed the "nanowire genome" is introduced here to clarify the relationships between hundreds of nanowires reported previously. As such, this approach will not only improve the tools incorporating the prior nanowires but also help to precisely synthesize new nanowires and even assist in the prediction on the properties of nanowires. Although the road from start-ups to maturity is long and fraught with challenges, the genetical syntheses of more than 200 kinds of nanostructures stemming from three mother nanowires (Te, Ag, and Cu) are summarized here to demonstrate the nanowire genome as a versatile toolbox. A summary and outlook on future challenges in this field are also presented.

A Quantitative Analysis of the Reduction Kinetics Involved in the Synthesis of Au@Pd Concave Nanocubes

Surface capping has been shown to play a pivotal role in controlling the evolution of metal nanocrystals into different shapes or morphologies. With the synthesis of Au@Pd concave nanocubes as an example, here we demonstrate that the capping agent can also impact the reduction kinetics of a precursor, and thereby its reduction pathway, for the formation of metal nanocrystals with distinct morphologies. A typical synthesis involves the reduction of a Pd^II precursor by ascorbic acid at room temperature in the presence of Au nanospheres as seeds, together with the use of hexadecyltrimethylammonium chloride (CTAC) or hexadecyltrimethylammonium bromide (CTAB) as the capping agent. In the case of CTAC, the Pd^II precursor prevails as PdCl₄ ^2- , leading to the formation of Au@Pd concave nanocubes with a rough surface because of the fast reduction kinetics and thus the dominance of solution reduction pathway. When switched to CTAB, the Pd^II precursor changes to PdBr₄ ^2- that features slow reduction kinetics and surface reduction pathway. Accordingly, the Au@Pd concave nanocubes take a smooth surface. This work demonstrates that both reduction kinetics and surface capping play important roles in controlling the morphology of metal nanocrystals and these two roles are often coupled to each other.

Ternary Palladium-Boron-Phosphorus Alloy Mesoporous Nanospheres for Highly Efficient Electrocatalysis

Alloying palladium (Pd) catalysts with various metalloid and nonmetal elements can improve their catalytic performance in different chemical reactions. However, current nanosynthesis methods can only generate Pd alloys containing one metalloid or nonmetal, which limits the types of element combinations that may be used to improve Pd-based nanocatalysts. Herein, we report a simple soft-templating synthetic strategy to co-alloy Pd with the metalloid boron (B) and the nonmetal phosphorus (P) to generate ternary PdBP mesoporous nanospheres (MSs) with three-dimensional dendritic frameworks. We use a one-step aqueous synthesis method where dimethylamine borane and sodium hypophosphite serve as the B and P sources, respectively, as well as the co-reducing agents to drive the nucleation and growth of ternary PdBP alloy on a sacrificial dioctadecyldimethylammonium chloride template. The concentration of metalloid to nonmetal and the diameters of dendritic MSs can be tailored. The synthetic protocol is also extended to other multicomponent PdMBP alloy MSs to generate different types of dendritic mesoporous frameworks. Boron and phosphorus are known to accelerate the kinetics of the electrochemical oxygen reduction reaction (ORR) and alcohol oxidation reactions (AORs), because their alloys promote the decomposition of oxygen-containing intermediates on Pd surfaces. The dendritic mesoporous morphology of the ternary PdBP MSs also accelerates electron/mass transfer and exposes numerous active sites, enabling better performance in the ORR and AORs. Extending the surfactant-templating synthetic route to multiple types of elements will enable the generation of libraries of multicomponent metal-metalloid-nonmetal alloy nanostructures with functions that are suitable for various targeted applications.

Systematic investigation on quad-metallic AgAuPdPt and tri-metallic AuPdPt NPs through the solid-state dewetting of quad-layer Ag/Au/Pd/Pt thin films on c-plane sapphire

Multi-metallic alloy nanoparticles (MNPs) can offer valuable opportunities to meet the various demands of applications. MNPs consist of various noble metallic elements can combine diverse electronic, optical and catalytic properties in a single NP configuration, thus taking the advantage of each element. In this paper, the fabrication of tri- and quad- metallic alloy NPs with noble elements (Ag, Au, Pd and Pt) and the corresponding localized surface plasmon resonance (LPSR) properties are systematically demonstrated. Tri- and quad-metallic alloy NPs come in various size and configurations by the solid-state dewetting of Ag/Au/Pd/Pt quad-layers on sapphire (0001). Tri-metallic AuPdPt NPs are demonstrated by the systematic control of growth temperature along with the significant Ag atom sublimation. Strongly enhanced and tunable LPSR is exerted in the UV-VIS regions depending upon the size, configuration, spacing and elemental composition of the MNPs. The size dependent LSPR response of MNPs is discussed based on the absorption and scattering along with the excitation of dipolar, quadrupolar, high order and multipolar resonance modes. The MNPs exhibit much stronger and dynamic LSPR bands as compared with the monometallic Pt and Pd NPs with the comparable size and configurations.

Room-Temperature Synthesis of Hollow Polymer Microparticles with an Open Hole on the Surface and Their Application

Compared with hollow microparticles with a completely closed shell structure, hollow polymer microparticles with an open hole on their surface have attracted considerable attention because of the obvious importance of the open hole on their surface; however, the development of a facile method to synthesize such unique open-ended hollow particles has remained a great challenge. In this study, an easy-to-use method was developed to rapidly produce monodispersed hollow and pored microparticles in high reaction yield at room temperature. The key to achieving the unusually shaped polystyrene (PS) microparticles was the use of anisotropic PS seeds. When hollow and dimpled PS seeds prepared using a modified dispersion polymerization method were dispersed in a water-toluene mixture followed by solvent evaporation under ambient conditions, they transformed into hollow PS microparticles with an open hole on their surface. A plausible mechanism for the transformation of the PS microparticles during the swelling and drying processes was proposed on the basis of our results and observations. The structural features of the hollow and pored PS microparticles motivated us to use the particles as a catalyst support. By using modified heterophase polymer dispersion processing involving the addition of a Ag precursor, hollow and pored PS microparticles covered with Ag nanocrystals were obtained on the basis of the in situ reduction of metal precursor on the surface of polymer particles. The resulting Ag nanocrystals/PS hybrid microparticles exhibited enhanced catalytic activity at low concentrations of nanocrystals and could be reused several times without loss of activity when used as catalysts for the reduction of 4-nitrophenol to 4-aminophenol with sodium borohydride.