Emerging chitin and chitosan nanofibrous materials for biomedical applications

Recent advances in chitosan-based layer-by-layer biomaterials and their biomedical applications

In recent years, chitosan-based biomaterials have been continually and extensively researched by using layer-by-layer (LBL) assembly, due to their potentials in biomedicine. Various chitosan-based LBL materials have been newly developed and applied in different areas along with the development of technologies. This work reviews the recent advances of chitosan-based biomaterials produced by LBL assembly. Driving forces of LBL, for example electrostatic interactions, hydrogen bond as well as Schiff base linkage have been discussed. Various forms of chitosan-based LBL materials such as films/coatings, capsules and fibers have been reviewed. The applications of these biomaterials in the field of antimicrobial applications, drug delivery, wound dressings and tissue engineering have been comprehensively reviewed.

Advancements in release-active antimicrobial biomaterials: A journey from release to relief

Escalating medical expenses due to infectious diseases are causing huge socioeconomic pressure on mankind globally. The emergence of antibiotic resistance has further aggravated this problem. Drug-resistant pathogens are also capable of forming thick biofilms on biotic and abiotic surfaces to thrive in a harsh environment. To address these clinical problems, various strategies including antibacterial agent delivering matrices and bactericidal coatings strategies have been developed. In this review, we have discussed various types of polymeric vehicles such as hydrogels, sponges/cryogels, microgels, nanogels, and meshes, which are commonly used to deliver antibiotics, metal nanoparticles, and biocides. Compositions of these polymeric matrices have been elaborately depicted by elucidating their chemical interactions and potential activity have been discussed. On the other hand, various implant/device-surface coating strategies which exploit the release-active mechanism of bacterial killing are discussed in elaboration. This article is categorized under: Therapeutic Approaches and Drug Discovery > Nanomedicine for Cardiovascular Disease Implantable Materials and Surgical Technologies > Nanomaterials and Implants Therapeutic Approaches and Drug Discovery > Nanomedicine for Infectious Disease.

Reviewing Chitin/Chitosan Nanofibers and Associated Nanocomposites and Their Attained Medical Milestones

Chitin/chitosan research is an expanding field with wide scope within polymer research. This topic is highly inviting as chitin/chitosan's are natural biopolymers that can be recovered from food waste and hold high potentials for medical applications. This review gives a brief overview of the chitin/chitosan based nanomaterials, their preparation methods and their biomedical applications. Chitin nanofibers and Chitosan nanofibers have been reviewed, their fabrication methods presented and their biomedical applications summarized. The chitin/chitosan based nanocomposites have also been discussed. Chitin and chitosan nanofibers and their binary and ternary composites are represented by scattered superficial reports. Delving deep into synergistic approaches, bringing up novel chitin/chitosan nanocomposites, could help diligently deliver medical expectations. This review highlights such lacunae and further lapses in chitin related inputs towards medical applications. The grey areas and future outlook for aligning chitin/chitosan nanofiber research are outlined as research directions for the future.

Fast acting hemostatic agent based on self-assembled hybrid nanofibers from chitosan and casein

Hemorrhage is a leading cause of preventable death in both military combat and civilian accidents. To overcome these challenges, an affordable and effective bandage is must required substance. A novel strategy is reported for developing chitosan-casein (CC) based self-assembled nanofibrous polyelectrolyte complex (PEC) for rapid blood clotting. The amide group (1630 cm^-1) and phosphate group (910 cm^-1) of chitosan-casein can form PEC at pH 8.2 ± 0.2. The PECs contain intertwined nanofibers (≤100 nm diameter) with a high surface area. Increasing chitosan percentage from 30% (CC30) to 50% (CC50) or 70% (CC70) results, increase in zeta potential of PEC from -9.14 ± 3.3 to 7.46 ± 3.7 and 14.8 ± 3.3 mV, respectively. Under in vitro conditions, the CC30, CC50, and CC70 PECs allow platelet adhesion and rapidly absorbs blood fluid to form mechanically stable blood clots within 9 ± 3, 16 ± 3, and 30 ± 4 s, respectively, which are better than Celox™ (90 ± 3 s). In vivo application of PEC (CC50) causes clotting within 37 ± 6 s of large (1 cm) arterial incision in rabbit models. The PEC is biocompatible with promising hemostatic efficiency. This is the first report of nanofibrous PEC from chitosan and casein for rapid clotting, to the best of our knowledge.

Hollow cellulose-carbon nanotubes composite beads with aligned porous structure for fast methylene blue adsorption

Polysaccharide based beads with unique porous structure have gained considerable interests due to their specific adsorption behaviors and biodegradability. The purpose of this paper was to develop hollow cellulose/carbon nanotubes composite beads with aligned porous structure which have potential applications in fast adsorption field. The composite beads were fabricated by ice template and freeze-drying technology. Different characterizations have proved that the carbon nanotubes and magnetic nanoparticles have been incorporated into the cellulose beads. Higher concentration of carbon nanotubes and cellulose would result in a larger diameter of the composite beads. The composite beads can effectively adsorb the methylene blue (MB). The pseudo-second-order model and Langmuir isotherm were best fitted to the adsorption. The composite beads showed a fast adsorption behavior towards MB with a t_1/2 of 1.07 min obtained from pseudo-second-order model. The maximum adsorption capacity was 285.71 mg g^-1 at pH 7.0. The composite beads also showed good reusability and biodegradability. We anticipate that different polysaccharides based composite beads with aligned porous structure can be obtained through the similar methods and applied in adsorption fields.

Utilization of Marine Waste to Obtain β-Chitin Nanofibers and Films from Giant Humboldt Squid Dosidicus gigas

β-chitin was isolated from marine waste, giant Humboldt squid Dosidicus gigas, and further converted to nanofibers by use of a collider machine under acidic conditions (pH 3). The FTIR, TGA, and NMR analysis confirmed the efficient extraction of β-chitin. The SEM, TEM, and XRD characterization results verified that β-chitin crystalline structure were maintained after mechanical treatment. The mean particle size of β-chitin nanofibers was in the range between 10 and 15 nm, according to the TEM analysis. In addition, the β-chitin nanofibers were converted into films by the simple solvent-casting and drying process at 60 °C. The obtained films had high lightness, which was evidenced by the CIELAB color test. Moreover, the films showed the medium swelling degree (250-290%) in aqueous solutions of different pH and good mechanical resistance in the range between 4 and 17 MPa, depending on film thickness. The results obtained in this work show that marine waste can be efficiently converted to biomaterial by use of mild extractive conditions and simple mechanical treatment, offering great potential for the future development of sustainable multifunctional materials for various industrial applications such as food packaging, agriculture, and/or wound dressing.

Electro-deposition synthesis of tube-like collagen-chitosan hydrogels and their biological performance

Electro-deposition is a smart, safe and efficient method for biomaterial manufacturing. Collagen, a functional protein with excellent biocompatibility and biosafety, is a promising candidate for tissue engineering and biomedical applications. However, there are few reports on electro-deposition of biomaterials using collagen without electrically or magnetically active nanoparticles. In this study, electro-deposition was employed to swiftly fabricate tube-like collagen-chitosan hydrogels in a mild environment. Fourier transform infrared spectroscopy was employed to analyze the ingredients of the tube-like hydrogels. The result showed that the hydrogels contained both collagen and chitosan. The distribution and content of collagen in the hydrogels was further measured by hematoxylin-eosin staining and hydroxyproline titration. Collagen was distributed homogeneously and its content was related to the initial collagen:chitosan ratio. The tension resistance of the composite gels and the thermal stability of collagen in the composites were obviously enhanced by the chitosan doping. Meanwhile, the tube-like hydrogels retained a good ability to promote cell proliferation of collagen. This method offers a convenient approach to the design and fabrication of collagen-based materials, which could effectively retain the bioactivity and biosafety of collagen and furnish a new way to enhance the stability of collagen and the tensile strength of collagen-based materials.

Biopolymer Nanofibers for Nanogenerator Development

The development of nanogenerators (NGs) with optimal performances and functionalities requires more novel materials. Over the past decade, biopolymer nanofibers (BPNFs) have become critical sustainable building blocks in energy-related fields because they have distinctive nanostructures and properties and can be obtained from abundant and renewable resources. This review summarizes recent advances in the use of BPNFs for NG development. We will begin by introducing various strategies for fabricating BPNFs with diverse structures and performances. Then, we will systematically present the utilization of polysaccharide and protein nanofibers for NGs. We will mainly focus on the use of BPNFs to generate bulk materials with tailored structures and properties for assembling of triboelectric and piezoelectric NGs. The use of BPNFs to construct NGs for the generation of electricity from moisture and osmosis is also discussed. Finally, we illustrate our personal perspectives on several issues that require special attention with regard to future developments in this active field.

Preparation and characterization of chitosan/Nano-ZnO composite film with antimicrobial activity

Chitosan is promising material for making food packaging film with antimicrobial activity. However, chitosan film usually has limited mechanical and antimicrobial properties and higher water solubility. To improve the performance of chitosan film, in this work, chitosan composite films were prepared by incorporating different sizes of zinc oxide particles of 5 μm, 100 nm, and 50 nm. The films were characterized by scanning electron microscopy, X-ray diffraction, Fourier-transform infrared spectroscopy, and mechanical analysis. Antimicrobial assay of the chitosan and CTS/nano-ZnO composite films against Escherichia coli and Staphylococcus aureus show that the composite chitosan films have better antibacterial activity. The film containing 0.3% of 50 nm zinc oxide particles showed the best inhibition rate, suggesting that smaller sizes of nano-ZnO particles have better bacteriostatic activity and potent application as an antibacterial additive ingredient.

Silk Fibroin as a Functional Biomaterial for Tissue Engineering

Tissue engineering (TE) is the approach to combine cells with scaffold materials and appropriate growth factors to regenerate or replace damaged or degenerated tissue or organs. The scaffold material as a template for tissue formation plays the most important role in TE. Among scaffold materials, silk fibroin (SF), a natural protein with outstanding mechanical properties, biodegradability, biocompatibility, and bioresorbability has attracted significant attention for TE applications. SF is commonly dissolved into an aqueous solution and can be easily reconstructed into different material formats, including films, mats, hydrogels, and sponges via various fabrication techniques. These include spin coating, electrospinning, freeze drying, physical, and chemical crosslinking techniques. Furthermore, to facilitate fabrication of more complex SF-based scaffolds with high precision techniques including micro-patterning and bio-printing have recently been explored. This review introduces the physicochemical and mechanical properties of SF and looks into a range of SF-based scaffolds that have been recently developed. The typical TE applications of SF-based scaffolds including bone, cartilage, ligament, tendon, skin, wound healing, and tympanic membrane, will be highlighted and discussed, followed by future prospects and challenges needing to be addressed.

Wearable Biosensors: An Alternative and Practical Approach in Healthcare and Disease Monitoring

With the increasing prevalence of growing population, aging and chronic diseases continuously rising healthcare costs, the healthcare system is undergoing a vital transformation from the traditional hospital-centered system to an individual-centered system. Since the 20th century, wearable sensors are becoming widespread in healthcare and biomedical monitoring systems, empowering continuous measurement of critical biomarkers for monitoring of the diseased condition and health, medical diagnostics and evaluation in biological fluids like saliva, blood, and sweat. Over the past few decades, the developments have been focused on electrochemical and optical biosensors, along with advances with the non-invasive monitoring of biomarkers, bacteria and hormones, etc. Wearable devices have evolved gradually with a mix of multiplexed biosensing, microfluidic sampling and transport systems integrated with flexible materials and body attachments for improved wearability and simplicity. These wearables hold promise and are capable of a higher understanding of the correlations between analyte concentrations within the blood or non-invasive biofluids and feedback to the patient, which is significantly important in timely diagnosis, treatment, and control of medical conditions. However, cohort validation studies and performance evaluation of wearable biosensors are needed to underpin their clinical acceptance. In the present review, we discuss the importance, features, types of wearables, challenges and applications of wearable devices for biological fluids for the prevention of diseased conditions and real-time monitoring of human health. Herein, we summarize the various wearable devices that are developed for healthcare monitoring and their future potential has been discussed in detail.

Electrospun fibers based on botanical, seaweed, microbial, and animal sourced biomacromolecules and their multidimensional applications

This review summarizes and broadly classifies all of the major sustainable natural carbohydrate bio-macromolecular manifestations in nature - from botanical (cellulose, starch, and pectin), seaweed (alginate, carrageenan, and agar), microbial (bacterial cellulose, dextran, and pullulan), and animal (hyaluronan, heparin, chitin, and chitosan) sources - that have been contrived into electrospun fibers. Furthermore, a relative study of these biomaterials for the fabrication of nanofibers by electrospinning and their characteristics viz. solution behavior, blending nature, as well as rheological and fiber attributes are discussed. The potential multidimensional applications of nanofibers (filtration, antimicrobial, biosensor, gas sensor, energy storage, catalytic, and tissue engineering) originating from these polysaccharides and their major impacts on the properties, functionalities, and uses of these electrospun fibers are compared and critically examined.

Designing Biomaterial Platforms for Cardiac Tissue and Disease Modeling

Heart disease is one of the leading causes of death in the world. There is a growing demand for in vitro cardiac models that can recapitulate the complex physiology of the cardiac tissue. These cardiac models can provide a platform to better understand the underlying mechanisms of cardiac development and disease and aid in developing novel treatment alternatives and platforms towards personalized medicine. In this review, a summary of engineered cardiac platforms is presented. Basic design considerations for replicating the heart's microenvironment are discussed considering the anatomy of the heart. This is followed by a detailed summary of the currently available biomaterial platforms for modeling the heart tissue in vitro. These in vitro models include 2D surface modified structures, 3D molded structures, porous scaffolds, electrospun scaffolds, bioprinted structures, and heart-on-a-chip devices. The challenges faced by current models and the future directions of in vitro cardiac models are also discussed. Engineered in vitro tissue models utilizing patients' own cells could potentially revolutionize the way we develop treatment and diagnostic alternatives.

The Possible Uses and Challenges of Nanomaterials in Mast Cell Research

Mast cells are tissue-resident immune cells that are involved in inflammation and fibrosis but also serve beneficial roles, including tissue maintenance, angiogenesis, pathogen clearance, and immunoregulation. Their multifaceted response and the ability of their mediators to target multiple organs and tissues means that mast cells play important roles in numerous conditions, including asthma, atopic dermatitis, drug sensitivities, ischemic heart disease, Alzheimer disease, arthritis, irritable bowel syndrome, infections (parasites, bacteria and viruses), and cancer. As a result, mast cells have become an important target for drug discovery and diagnostic research. Recent work has focused on applying novel nanotechnologies to explore cell biology. In this brief review, we will highlight the use of nanomaterials to modify mast cell functions and will discuss the potential of these technologies as research tools for understanding mast cell biology.

Quantification of Extracellular Proteases and Chitinases from Marine Bacteria

A total of 92 marine bacteria belonging to Pseudomonas, Pseudoalteromonas, Psychrobacter, and Shewanella were first screened for their proteolytic activity. In total, four Pseudomonas strains belonging to Ps. fluorescens, Ps. fragi, Ps. gessardii, and Ps. marginalis; 14 Pseudoalteromonas strains belonging to Psa. arctica, Psa. carrageenovora, Psa. elyakovii, Psa. issachenkonii, Psa. rubra, Psa. translucida, and Psa. tunicata; and two Shewanella strains belonging to S. baltica and S. putrefaciens were identified to have a weak to high proteolytic activity (from 478 to 4445 mU/mg trypsin equivalent) against skim milk casein as protein source. Further chitinolytic activity screening based on these 20 proteolytic strains using colloidal chitin yielded five positive strains which were tested against three different chitin substrates in order to determine the various types of chitinases. Among the strains that can produce both proteases and chitinases, Psa. rubra DSM 6842^T expressed not only the highest proteolytic activity (2558 mU/mg trypsin equivalent) but also the highest activity of exochitinases, specifically, β-N-acetylglucosaminidase (6.33 mU/10⁷ cfu) as well. We anticipate that this strain can be innovatively applied to the valorization of marine crustaceans side streams.

Self-assembled nanogels of luminescent thiolated silver nanoclusters and chitosan as bactericidal agent and bacterial sensor

Multifunctional theranostic agents with the features of good biocompatibility, long-term antibacterial efficacy, and rapid bacterial detection are the desired future medicine for infectious diseases, but which poses huge challenges on the design of such multifunctional nanocomposites in a single entity. Herein, self-assembled nanogels of thiolated silver nanoclusters (Ag NCs) and chitosan was designed and synthesized, which combines the desirable biocompatible, targeting specific, luminescent properties. This nanogel displays an amplified luminescence via strong matrix-ligand coordination between thiolate ligands and chitosan matrix to rigidify the molecular structure on the surface of Ag NCs. Concomitantly, this nanogel exhibits exceptional bactericidal activity, with approximately >10-fold stronger activity compared to its counterpart Ag NCs. Furthermore, a bacterial detection system was developed based on the bacterial binding on the fluorescent nanogels. This work provides a new strategy in designing multifunctional theranostic agents and this new composite Ag NC nanogel holds great promise for practical applications as the theranostic nanomedicines.

Chitosan-based drug delivery systems: From synthesis strategy to osteomyelitis treatment - A review

Osteomyelitis is a complex disease in orthopedics mainly caused by bacterial pathogens invading bone or bone marrow. The treatment of osteomyelitis is highly difficult and it is a major challenge in orthopedic surgery. The long-term systemic use of antibiotics may lead to antibiotic resistance and has limited effects on eradicating local biofilms. Localized antibiotic delivery after surgical debridement can overcome the problem of antibiotic resistance and reduce systemic toxicity. Chitosan, a special cationic polysaccharide, is a product extracted from the deacetylation of chitin. It has numerous advantages, such as nontoxicity, biocompatibility, and biodegradability. Recently, chitosan has attracted significant attention in bacterial inhibition and drug delivery. Because chitosan contains many functional bioactive groups conducive to chemical reaction and modification, some chitosan-based biomaterials have been applied as the local antibiotic delivery systems in the treatment of osteomyelitis. This review aims to introduce recent advances in the biomedical applications of chitosan-based drug delivery systems in osteomyelitis treatment and to highlight the perspectives for further studies.

Antibacterial Hybrid Hydrogels

Bacterial infectious diseases and bacterial-infected environments have been threatening the health of human beings all over the world. In view of the increased bacteria resistance caused by overuse or improper use of antibiotics, antibacterial biomaterials are developed as the substitutes for antibiotics in some cases. Among them, antibacterial hydrogels are attracting more and more attention due to easy preparation process and diversity of structures by changing their chemical cross-linkers via covalent bonds or noncovalent physical interactions, which can endow them with various specific functions such as high toughness and stretchability, injectability, self-healing, tissue adhesiveness and rapid hemostasis, easy loading and controlled drug release, superior biocompatibility and antioxidation as well as good conductivity. In this review, the recent progress of antibacterial hydrogel including the fabrication methodologies, interior structures, performances, antibacterial mechanisms, and applications of various antibacterial hydrogels is summarized. According to the bacteria-killing modes of hydrogels, several representative hydrogels such as silver nanoparticles-based hydrogel, photoresponsive hydrogel including photothermal and photocatalytic, self-bacteria-killing hydrogel such as inherent antibacterial peptides and cationic polymers, and antibiotics-loading hydrogel are focused on. Furthermore, current challenges of antibacterial hydrogels are discussed and future perspectives in this field are also proposed.

Dexamethasone- loaded polymeric porous sponge as a direct pulp capping agent

This study aims to achieve the principles of tissue engineering using biopolymers to be applied in the field of vital endodontic treatment to stimulate stem cells and engineering and regeneration of dentin tissue. the polymer blend was loaded with the steroidal anti-inflammatory drug, dexamethasone, and the porous drug-loaded bio-sponge was produced by lyophilization. Bio-sponge, as a direct pulp capping agent, was histologically studied compared to calcium hydroxide Ca(OH)₂ in an animal experiment. The results indicated the effectiveness of the bio-sponge as a direct pulp capping agent where the dentin bridge was formed faster than Ca(OH)₂ treated samples. There was no inflammatory response in the pulp tissue throughout the follow-up period. The porous bio-sponge loaded with dexamethasone with a neutral pH resulted in enhancement of the odontoblast differentiation from stem cells, resulting in the formation of a renewed dentin bridge without the slightest inflammatory response in the pulp.

Multi-Bit Biomemory Based on Chitosan: Graphene Oxide Nanocomposite with Wrinkled Surface

Chitosan (CS) is one of the commonly affluent polysaccharides that are attractive biomaterials as they are easily found in different organisms and are biocompatible. An environment-friendly multi-bit biomemory was successfully achieved on the basis of CS as a favorable candidate for resistive-switching memory applications. By incorporating graphene oxide (GO) into CS, the multi-bit biomemory device (indium tin oxide (ITO)/CS:GO/Ni) was obtained through the solution-processable method, which had a high current ratio among a high, intermediate, and low resistance state as well as a low SET/RESET voltage. GO acting as trapping sites in the active layer might be responsible for the biomemory mechanism. This research opens up a new avenue towards renewable and environmentally benign CS-based materials for biodegradable electronic devices.

Upgrading of marine (fish and crustaceans) biowaste for high added-value molecules and bio(nano)-materials

Currently, the Earth is subjected to environmental pressure of unprecedented proportions in the history of mankind. The inexorable growth of the global population and the establishment of large urban areas with increasingly higher expectations regarding the quality of life are issues demanding radically new strategies aimed to change the current model, which is still mostly based on linear economy approaches and fossil resources towards innovative standards, where both energy and daily use products and materials should be of renewable origin and 'made to be made again'. These concepts have inspired the circular economy vision, which redefines growth through the continuous valorisation of waste generated by any production or activity in a virtuous cycle. This not only has a positive impact on the environment, but builds long-term resilience, generating business, new technologies, livelihoods and jobs. In this scenario, among the discards of anthropogenic activities, biodegradable waste represents one of the largest and highly heterogeneous portions, which includes garden and park waste, food processing and kitchen waste from households, restaurants, caterers and retail premises, and food plants, domestic and sewage waste, manure, food waste, and residues from forestry, agriculture and fisheries. Thus, this review specifically aims to survey the processes and technologies for the recovery of fish waste and its sustainable conversion to high added-value molecules and bio(nano)materials.

Diclofenac sustained release from sterilised soft contact lens materials using an optimised layer-by-layer coating

A layer-by-layer (LbL) coating was designed using ionic polysaccharides (chitosan, sodium alginate, sodium hyaluronate) and genipin (crosslinker), to sustain the release of diclofenac sodium salt (DCF) from soft contact lens (SCL) materials. The coating was hydrophilic, biocompatible, non-toxic, reduced bacterial growth and had minor effects on the physical properties of the material, such as wettability, ionic permeability, refractive index and transmittance, which remained within the recommended values for SCLs. The coating was applied on a silicone-based hydrogel and on commercial SofLens and Purevision SCLs. The coating attenuated the initial drug burst and extended the therapeutic period for, at least, two weeks. Relevantly, the problems of sterilizing drug loaded SCLs coated with biopolymers, using classic methods that involve high temperature or radiation, were successfully solved through high hydrostatic pressure (HHP) sterilization.

The effects of synthetic orally administrated insulin nanoparticles in comparison to injectable insulin on the renal function markers of type 1- diabetic rats

OBJECTIVES

Injectable insulin is the most widely used therapy in patients with type 1 diabetes which has several disadvantages. The present study was aimed to evaluate the efficacy of injectable insulin on diabetes mellitus-related complications in comparison to orally encapsulated insulin nanoparticles.

MATERIALS AND METHODS

This study involved 42 Wistar rats separated into 5 groups, including control (C), diabetic control (D), diabetic receiving regular insulin (INS), diabetic receiving encapsulated insulin nanoparticle (INP), and diabetic receiving chitosan for two months. Biochemical parameters in serum and urine were measured using spectrophotometric or ELISA methods. mRNA levels of kidney injury molecule 1 (KIM-1) and neutrophil gelatinase-associated lipocalin (NGAL) were evaluated using quantitative PCR.

RESULTS

There were no significant differences between the two forms of insulin in controlling the glycemic condition (P-value>0.05), but oral INP was more effective in correcting diabetic dyslipidemia in comparison to injectable insulin (P-value<0.05). Urine volume and creatinine excretion were significantly modulated by insulin and oral INP in diabetic groups (P-value<0.05), although the effects of INP on the modulation of execration of urea, acid uric, and albumin was more dramatic. Oral INP caused a significant decrease in urine concentration of KIM-1 and NGAL as well as expression of KIM-1 in renal tissue (P-value<0.05).

CONCLUSION

Our results suggested that oral INP is more effective than injectable insulin in modulation of urine and serum diabetic-related parameters.

Nature-derived materials for the fabrication of functional biodevices

Nature provides an incredible source of inspiration, structural concepts, and materials toward applications to improve the lives of people around the world, while preserving ecosystems, and addressing environmental sustainability. In particular, materials derived from animal and plant sources can provide low-cost, renewable building blocks for such applications. Nature-derived materials are of interest for their properties of biodegradability, bioconformability, biorecognition, self-repair, and stimuli response. While long used in tissue engineering and regenerative medicine, their use in functional devices such as (bio)electronics, sensors, and optical systems for healthcare and biomonitoring is finding increasing attention. The objective of this review is to cover the varied nature derived and sourced materials currently used in active biodevices and components that possess electrical or electronic behavior. We discuss materials ranging from proteins and polypeptides such as silk and collagen, polysaccharides including chitin and cellulose, to seaweed derived biomaterials, and DNA. These materials may be used as passive substrates or support architectures and often, as the functional elements either by themselves or as biocomposites. We further discuss natural pigments such as melanin and indigo that serve as active elements in devices. Increasingly, combinations of different biomaterials are being used to address the challenges of fabrication and performance in human monitoring or medicine. Finally, this review gives perspectives on the sourcing, processing, degradation, and biocompatibility of these materials. This rapidly growing multidisciplinary area of research will be advanced by a systematic understanding of nature-inspired materials and design concepts in (bio)electronic devices.

In vivo evaluation of the wound healing properties of bio-nanofiber chitosan/ polyvinyl alcohol incorporating honey and Nepeta dschuparensis

Engineering bioscaffolds for improved cutaneous tissue regeneration remains a healthcare challenge. To help address this problem, we report on the fabrication and characterization of electrospun polyvinyl alcohol and chitosan (PVA/Chit) nanofiber mats loaded honey and Nepeta dschuparensis plant for faster wound healing applications. The morphology of nanofiber mats was examined by SEM and TEM. The physicochemical and thermal stability characterizations were done by FT-IR and TGA/DTA, which reveal the presence of honey and desired plant into the nanofibers. PVA/Chit@Nep/Hon was investigated for wound healing therapy as a potential therapeutic agent. The in vivo wound healing studies on the rats for 21 days revealed the wound healing faster within three weeks by the incorporation of honey and plant into the nanofiber mats and hence these nanofiber mats show great potential in acute and chronic wound healing applications.

The fabrication of a highly efficient self-healing hydrogel from natural biopolymers loaded with exosomes for the synergistic promotion of severe wound healing

Unhealable diabetic wounds and disabling scar formation in severe wounds need to be addressed with the help of multiple techniques. Here we put forward an idea to use exosomes loaded into a supporting scaffold to rebuild the vascular transportation system, which could solve hypoxia and infertility in these wounds. A highly efficient self-healing and biocompatible natural-based methylcellulose-chitosan hydrogel loaded with biological exosome nanoparticles has the appropriate strength and is made by an easy preparation process, and it eventually achieves the integrated structure needed for healing severe diabetic conditions. Hydrogels perform well in the cell proliferation and skin remodeling stages because of their three-dimensional porous structure, and self-healing and adhesion properties. Also, exosomes accumulated to an effective concentration for a period of time could induce proliferation, especially relating to vascular formation. After the overpass (vascular) has been constructed with the help of the base (hydrogel) and workers (exosomes), the society (skin) is reconstructed under a system of supply and regulation. The research results indicate that these novel complex hydrogels loaded with exosomes provide wide prospects for the healing of severe wounds.

Biomemristic Behavior for Water-Soluble Chitosan Blended with Graphene Quantum Dot Nanocomposite

Bionanocomposite has promising biomemristic behaviors for data storage inspired by a natural biomaterial matrix. Carboxylated chitosan (CCS), a water-soluble derivative of chitosan avoiding the acidic salt removal, has better biodegradability and bioactivity, and is able to absorb graphene quantum dots (GQDs) employed as charge-trapping centers. In this investigation, biomemristic devices based on water-soluble CCS:GQDs nanocomposites were successfully achieved with the aid of the spin-casting method. The promotion of binary biomemristic behaviors for Ni/CCS:GQDs/indium-tin-oxide (ITO) was evaluated for distinct weight ratios of the chemical components. Fourier transform infrared spectroscopy, Raman spectroscopy (temperature dependence), thermogravimetric analyses and scanning electron microscopy were performed to assess the nature of the CCS:GQDs nanocomposites. The fitting curves on the experimental data further confirmed that the conduction mechanism might be attributed to charge trapping-detrapping in the CCS:GQDs nanocomposite film. Advances in water-soluble CCS-based electronic devices would open new avenues in the biocompatibility and integration of high-performance biointegrated electronics.

Structure-properties relationship of chitosan/collagen films with potential for biomedical applications

Chitosan/collagen films were developed and characterized in order to assess the suitability of these films for biomedical applications. Hence, physicochemical, thermal, barrier and mechanical properties were analyzed and related to the film structure, which showed the prevalence of the triple helix of native collagen after the addition of chitosan. Furthermore, collagen fiber diameter changed from 3.9 ± 0.6 μm, for collagen films without chitosan, to 1.8 ± 0.5 μm, for collagen films with low molecular weight chitosan. These results suggested interactions between collagen and chitosan molecules, as observed by Fourier transform infrared (FTIR) analysis. Regarding film barrier properties, chitosan/collagen films showed a water vapor transmission rate around 1174 g m^-2 day^-1, suitable for biomedical applications such as wound healing. Additionally, biological tests confirmed that the chitosan/collagen films developed are suitable for biomedical applications.

Luminescence properties of the Ln-EDTA complexes covalently linked to the chitosan biopolymers containing β-diketonate as antenna ligands

This paper reports on the preparation, characterization, and photoluminescence properties of novel hybrid materials, in which the EDTA-Ln-L complexes (where L: H₂ O, acac, bzac, dbm, and tta ligands, and Ln: Eu, Gd, and Tb) were covalently linked to the precursor medium molecular weight chitosan surface (CS) matrices or on the chitosan surfaces previously crosslinked with epichlorohydrin (CSech). The emission spectra of these materials were characterized by intraconfigurational-4fN transitions centred on the Eu³⁺ and Tb³⁺ ions. Some broad bands from the polymeric matrix were also observed in the emission spectra, however the relative intensities of the intraconfigurational bands increased significantly for systems containing diketonate ligands when the antenna effect became more efficient. The values of the radiative rates (A_rad ) were higher for crosslinked hybrid systems with epichlorohydrin, while nonradiative rates (A_nrad ) presented the opposite behaviour. These data contributed to an increase in the values of emission quantum efficiency (η) for crosslinked materials. The effect of the modification process and antenna ligand on the values of intensities, intensity parameters Ω₂ e Ω₄ of the Eu³⁺ complexes were also investigated. The results showed that the crosslinked biopolymer surfaces have great potential for applications in molecular devices light converters.

Electrodeposition of Polysaccharide and Protein Hydrogels for Biomedical Applications

In the last few decades, polysaccharide and protein hydrogels have attracted significant attentions and been applied in various engineering fields. Polysaccharide and protein hydrogels with appealing physical and biological features have been produced to meet different biomedical applications for their excellent properties related to biodegradability, biocompatibility, nontoxicity, and stimuli responsiveness. Numerous methods, such as chemical crosslinking, photo crosslinking, graft polymerization, hydrophobic interaction, polyelectrolyte complexation and electrodeposition have been employed to prepare polysaccharide and protein hydrogels. Electrodeposition is a facile way to produce different polysaccharide and protein hydrogels with the advantages of temporal and spatial controllability. This paper reviews the recent progress in the electrodeposition of different polysaccharide and protein hydrogels. The strategies of pH induced assembly, Ca2+ crosslinking, metal ions induced assembly, oxidation induced assembly derived from electrochemical methods were discussed. Pure, binary blend and ternary blend polysaccharide and protein hydrogels with multiple functionalities prepared by electrodeposition were summarized. In addition, we have reviewed the applications of these hydrogels in drug delivery, tissue engineering and wound dressing.

Exploration of Chitinous Scaffold-Based Interfaces for Glucose Sensing Assemblies

: The nanomaterial-integrated chitinous polymers have promoted the technological advancements in personal health care apparatus, particularly for enzyme-based devices like the glucometer. Chitin and chitosan, being natural biopolymers, have attracted great attention in the field of biocatalysts engineering. Their remarkable tunable properties have been explored for enhancing enzyme performance and biosensor advancements. Currently, incorporation of nanomaterials in chitin and chitosan-based biosensors are also widely exploited for enzyme stability and interference-free detection. Therefore, in this review, we focus on various innovative multi-faceted strategies used for the fabrication of biological assemblies using chitinous biomaterial interface. We aim to summarize the current development on chitin/chitosan and their nano-architecture scaffolds for interdisciplinary biosensor research, especially for analytes like glucose. This review article will be useful for understanding the overall multifunctional aspects and progress of chitin and chitosan-based polysaccharides in the food, biomedical, pharmaceutical, environmental, and other diverse applications.

Applications of chitin and chitosan nanofibers in bone regenerative engineering

Promoting bone regeneration and repairing defects are urgent and critical challenges in orthopedic clinical practice. Research on bone substitute biomaterials is essential for improving the treatment strategies for bone regeneration. Chitin and its derivative, chitosan, are among the most abundant natural biomaterials and widely found in the shells of crustaceans. Chitin and chitosan are non-toxic, antibacterial, biocompatible, degradable, and have attracted significant attention in bone substitute biomaterials. Chitin/chitosan nanofibers and nanostructured scaffolds have large surface area to volume ratios and high porosities. These scaffolds can be fabricated by electrospinning, thermally induced phase separation and self-assembly, and are widely used in biomedical applications such as biological scaffolds, drug delivery, bacterial inhibition, and wound dressing. Recently, some chitin/chitosan-based nanofibrous scaffolds have been found structurally similar to bone's extracellular matrix and can assist in bone regeneration. This review outlines the biomedical applications and biological properties of chitin/chitosan-based nanofibrous scaffolds in bone tissue engineering.

Development of bacterial cellulose/chitin multi-nanofibers based smart films containing natural active microspheres and nanoparticles formed in situ

Nanofiber-based materials have recently gained increasing attention in food packaging, drug delivery, and biomedical applications. In this study, a multi-nanofibers composite film was developed based on bacterial cellulose nanofiber (BCNF)/chitin nanofiber (CNF) hybridization. The nanofibers were responsible for the formation of well-dispersed curcumin (Cur) micro/nanoparticles in the nanocomposite films. The release of Cur from the films were affected by CNF and the sizes of Cur particles formed in situ. The Cur particles reduced tensile strength and increased water vapor permeability of BCNF film. However, CNF improved the mechanical strength and barrier property of the Cur/BCNF/CNF composite film. Moreover, the multi-nanofibers composite film showed excellent dynamic antioxidant capacity and antibacterial activity, as well as was capable to monitor pH change and trace amount of boric acid. Results of this study suggested that the Cur/BCNF/CNF composite film can be used as a smart and active food packaging material.

Window screen inspired fibrous materials with anisotropic thickness gradients for improving light transmittance

Fibrous materials with high light transmittance exhibit great potential in a wide range of applications; unfortunately, fabrication of such materials still remains a challenge due to the strong light scattering caused by the rough fibrous structure and the voids between fibers. Window screens are commonly used in our daily life, and their unique woven structure ensures excellent mechanical properties, while the voids between wires allow light to pass through. By learning from the architecture of window screens, we proposed a novel patterned electrospinning approach with window screen like wire meshes as collectors to deposit fibers with anisotropic thickness gradients and further to improve the optical properties. The results indicated that the obtained fibrous mats closely copied the structure of the wire meshes, and exhibited unique thickness anisotropy with most of the fibers densely packed on the wires in a small area, while very few fibers sparsely suspended in the voids over a large area. Owing to the large area of the thin region within fibrous mats, the overall light transmittance of such a well-organized mat was greatly improved as compared with that of an isotropous mat. Furthermore, by carefully investigating the microstructure of the fibrous mats and simulating the electric field distribution with the software Comsol Multiphysics, a novel needle array collector with an ultra large area of voids was designed to achieve optimal light transparency. Finally, as proof of concepts, we investigated the potential use of transparent fibrous mats as a visual wound dressing and a window dust filter, respectively.

Natural Polysaccharides for siRNA Delivery: Nanocarriers Based on Chitosan, Hyaluronic Acid, and Their Derivatives

Natural polysaccharides are frequently used in the design of drug delivery systems due to their biocompatibility, biodegradability, and low toxicity. Moreover, they are diverse in structure, size, and charge, and their chemical functional groups can be easily modified to match the needs of the final application and mode of administration. This review focuses on polysaccharidic nanocarriers based on chitosan and hyaluronic acid for small interfering RNA (siRNA) delivery, which are highly positively and negatively charged, respectively. The key properties, strengths, and drawbacks of each polysaccharide are discussed. In addition, their use as efficient nanodelivery systems for gene silencing applications is put into context using the most recent examples from the literature. The latest advances in this field illustrate effectively how chitosan and hyaluronic acid can be modified or associated with other molecules in order to overcome their limitations to produce optimized siRNA delivery systems with promising in vitro and in vivo results.

Biocompatible Inhibitor Based on Chitosan and Amphiphilic Peptide against Mutant Huntingtin Toxicity

Huntington's disease (HD) is classified as a protein-misfolding disease correlated with the mutant Huntingtin (mHtt) protein with abnormally expanded polyglutamine (polyQ) domains. Because no effective drugs have yet been reported, attempts to develop better therapy to delay the age of onset are in urgent demand. In this study, an amphiphilic peptide consisting of negatively charged hexaglutamic acid and a stretch of decaglutamine (E₆ Q₁₀ ) was chemically synthesized as an inhibitor against polyQ and mHtt toxicity. It is found that E₆ Q₁₀ selfassembles into spherical vesicles, as shown by means of TEM, cryoelectron microscopy, and dynamic light scattering. Assembled E₆ Q₁₀ prevented the polyQ-rich peptide (KKWQ₂₀ AKK) from forming amyloid fibrils. To enable the cell-penetration ability of E₆ Q₁₀ , the E₆ Q₁₀ ⋅chitosan complex was generated. It is demonstrated that the complex penetrates cells, interferes with the mHtt oligomerization and aggregation process, and prevents mHtt cytotoxicity. By combining positively charged chitosan and amphiphilic peptides with a negatively charge moiety, a new strategy is provided to develop biocompatible and biodegradable inhibitors against mHtt toxicity.

Fabrication of biopolymer based nanocomposite wound dressing: evaluation of wound healing properties and wound microbial load

The aim of this study is to introduce natural-based polymers, chitosan and starch, to design a remedial nanocomposite, comprising of cerium oxide nanoparticles and silver nanoparticles, to investigate their effects in accelerating wound healing and in wound microbial load. Cerium oxide nanoparticles synthesized in starch solution added to the colloidal dispersion of synthesized silver nanoparticles in chitosan to make a three-component nanomaterial. Mice were anaesthetized and two parallel full-thickness round wounds were excised under aseptic conditions with the help of sterile dermal biopsy punch. Furthermore, effects of silver-chitosan and silver-cerium-chitosan nanocomposite had evaluated on rate of wound closure and collagen density and on microbial load of wound in full-thickness model. Results showed that both silver chitosan and silver-cerium-chitosan had significant impact on acceleration of wound closure and collagen content and on reduction of wound microbial load in comparison with control group, which was, received no treatments. However, the silver-cerium-chitosan nanocomposite is more potent than silver-chitosan group and control group in wound closure. The wound healing effects of silver-cerium-chitosan nanocomposite are due to unique features of its three components and this nanocomposite promises impressive remedies for clinical application.

Electrophoretic deposition of GHK-Cu loaded MSN-chitosan coatings with pH-responsive release of copper and its bioactivity

Despite the fact that titanium has been widely applied in the replacement of bone defects, prosthesis failure still occurred because of the lack of adequate bone-bonding ability and the incidence of post-surgery infections. Concentration-dependent effects of therapeutic copper ions (Cu²⁺) for antibacterial and osteogenic activity have been well-established in the field of biomedical application. In this study, we prepared mesoporous silica nanoparticles (MSN) and MSN-COOH with uniform sphere size (~100 nm) and developed multifunctional chitosan coatings loaded with MSN@GHK-Cu (glycyl-L-histidyl-l-lysine-Cu²⁺) as a suitable strategy by electrophoretic deposition (EPD). The microstructure and composition of the coating were comprehensively characterized by using SEM, XRD, FTIR, and TEM, respectively. The functional activity of Cu²⁺ releasing from the surface was dependent on the pH value of the titanium surface. Through the controllable release of Cu²⁺, the coating achieved not only inhibited adhesion of bacteria but also had good cytocompatibility. The coating based on EPD technique could be considered as a promising surface modification approach for the controlled delivery in situ of drug or other biomolecules.