Preparation of biomass-based gas separation membranes from biochar residue obtained by depolymerization of lignin with ZSM-5 to promote a circular bioeconomy

Reuse of biochar residues after lignin degradation will not only save costs but also reduce the pollution, protect and improve the environment. In this study, biochar residue (BR) after peanut shell lignin selective depolymerization on ZSM-5 were recycled, and characterized by Scanning Electron Microscopy, Surface area & pore size distribution analyzers, Thermogravimetric Analysis. Subsequently, a series of hybrid matrix membranes were prepared using ethyl cellulose as the matrix and biochar residue after depolymerization under different reaction conditions as the filler. The separation performance of BR/EC membranes for CO₂/CH₄ mixed gas and CO₂/N₂ mixed gas was measured. The results showed that the gas separation membranes prepared with biochar residue (3 h, 300 °C) as filler had good gas separation characteristics. The resulting mixed-matrix membrane exhibited a permeability of 66.00 Barrer for CO₂ and selectivities of 9.97 for CO₂/CH₄. Meanwhile, the resulting mixed-matrix membrane exhibited a permeability of 79.53 Barrer for CO₂ and selectivities of 20.01 for CO₂/N₂. Both exceed the upper limit of known pure EC membranes. Therefore, the use of biochar residue after ZSM-5 depolymerization as a filler for gas separation membranes is a feasible way. Furthermore, the membrane is well stabilized, proving its good potential for industrial applications.

Insight into the interdependence of Ni and Al in bifunctional Ni/ZSM-5 catalysts at the nanoscale

Catalyst design is crucial for improving catalytic activity and product selectivity. In a bifunctional Ni/ZSM-5 zeolite type catalyst, catalytic properties are usually tuned via varying Al and Ni contents. While changes in acid properties associated with Al sites are usually closely investigated, Ni phases, however, receive inadequate attention. Herein, we present a systematic structural study of Ni in the Ni/ZSM-5 materials by using Ni K-edge XANES and EXAFS analyses, complemented by XRD and TEM, to resolve the changes in the local environment of Ni species induced by the different Al contents of the parent ZSM-5 prepared by a "green", template free technique. Ni species in Ni/ZSM-5 exist as NiO crystals (3-50 nm) and as charge compensating Ni²⁺ cations. The Ni K-edge XANES and EXAFS results enabled the quantification of Ni-containing species. At a low Al to Si ratio (n _Al/n _Si ≤ 0.04), the NiO nanoparticles predominate in the samples and account for over 65% of Ni phases. However, NiO is outnumbered by Ni²⁺ cations attached to the zeolite framework in ZSM-5 with a high Al to Si ratio (n _Al/n _Si = 0.05) due to a higher number of framework negative charges imparted by Al. The obtained results show that the number of highly reducible and active NiO crystals is strongly correlated with the framework Al sites present in ZSM-5 zeolites, which depend greatly on the synthesis conditions. Therefore, this kind of study is beneficial for any further investigation of the catalytic activities of Ni/ZSM-5 and other metal-modified bifunctional catalysts.

Acid Catalysis over Low-Silica Faujasite Zeolites

Low-silica faujasite (FAU) zeolites (with Si/Al ratio of ca. 1.2-1.8) sustain framework integrity and porosity upon moderate ion exchange (0.01 M NH₄NO₃ solution for 1 h at ambient temperature), which introduces two kinds of protons, distinctive in reactivity and coordination to the zeolite framework, within supercages (H_SUP). Moderate ion exchange limited within supercages transpires while maintaining full occupancy of Na⁺ cations within associated sodalite cages; this in turn helps stabilize the framework of low-silica H-FAU zeolites. Protons located on site II (H₃₆₃₀) and site III (H₃₆₅₀) within supercages on low-silica FAU zeolites can be classified and enumerated by virtue of infrared spectroscopy, providing an opportunity to compare reactivities of these distinct protons for monomolecular protolytic reactions of propane. Protons on site II exhibit prominently higher reactivity for monomolecular propane dehydrogenation and cracking than protons on site III. Low-silica proton-form FAU zeolites (zeolite X) upon moderate ion exchange possess protons on site III that are unavailable on high-silica FAU zeolites (zeolite Y) and limit ion exchange within supercages, providing unprecedented high-temperature structural and chemical stability (>773 K) and enabling their application as solid-acid catalysts.

The Role Played by Ionic Liquids in Carbohydrates Conversion into 5-Hydroxymethylfurfural: A Recent Overview

Obtaining industrially relevant products from abundant, cheap, renewable, and low-impacting sources such as lignocellulosic biomass, is a key step in reducing consumption of raw fossil materials and, consequently, the environmental footprint of such processes. In this regard, a molecule that is similar to 5-hydroxymethylfurfural (5-HMF) plays a pivotal role, since it can be produced from lignocellulosic biomass and gives synthetic access to a broad range of industrially important products and polymers. Recently, ionic liquids (ILs) have emerged as suitable solvents for the conversion of biomass and carbohydrates into 5-HMF. Herein, we provide a bird's-eye view on recent achievements about the use of ILs for the obtainment of 5-HMF, covering works that were published over the last five years. In particular, we first examine reactions involving homogeneous catalysis as well as task-specific ionic liquids. Then, an overview of the literature addressing the use of heterogeneous catalysts, including enzymes, is presented. Whenever possible, the role of ILs and catalysts driving the formation of 5-HMF is discussed, also comparing with the same reactions that are performed in conventional solvents.

Dissolution Behavior and Varied Mesoporosity of Zeolites by NH4 F Etching

The mesopores formation in zeolite crystals has long been considered to occur through the stochastic hydrolysis and removal of framework atoms. Here, we investigate the NH₄ F etching of representative small, medium, and large pore zeolites and show that the zeolite dissolution behavior, therefore the mesopore formation probability, is dominated by zeolite architecture at both nano- and sub-nano scales. At the nano-scale, the hidden mosaics of zeolite structure predetermine the spatio-temporal dissolution of the framework, hence the size, shape, location, and orientation of the mesopores. At the sub-nano scale, the intrinsic micropore size and connectivity jointly determine the diffusivity of reactant and dissolved products. As a result, the dissolution propensity varies from removing small framework fragments to consuming nanodomains and up to full digestion of the outmost part of zeolite crystals. The new knowledge will lead to new understanding of zeolite dissolution behavior and new adapted strategies for tailoring hierarchical zeolites.

Critical review on adsorptive removal of antibiotics: Present situation, challenges and future perspective

This review gives a proper dedicated understanding of the contamination level, sources, and biological dangers related with different classes of antibiotics in consumable water. The literature on the adsorption of antibiotics is relatively uncommon and developments are still under progression, especially for adsorbents other than activated carbon. Also, adsorption technique has already been applied vastly for water treatment. Notwithstanding significant progressions, designed natural wastewater treatment frameworks are just bearably effective (48-77%) in the expulsion of antibiotics. Hence, the compilation of available literature especially for antibiotic adsorption was much needed. Moreover, the conventional adsorbents have some limitations of their own. In this study, the main focus was laid on unconventional adsorbents such as Biochar, Biopolymers, Carbon Nanotubes, Clays, Metal-Organic Frameworks, Microalgae and some miscellaneous adsorbents. The mechanism of adsorption by the unconventional adsorbents includes electrostatic interactions, π-π bonding, weak Van der Waal forces, H-bonding and surface complexation, which was similar to that of conventional adsorbents and hence these unconventional adsorbents can easily replace the costlier conventional adsorbents with even better adsorption efficiency. This paper also briefly discussed the thermodynamics, adsorption equilibrium; isotherm and kinetics of adsorption. This review paper seizes the critical advances of adsorption phenomenon at various interfaces and lays the foundation for current scenario associated with further progress. Besides, this study would help in understanding the antibiotic adsorption, cost estimation and future goals that will attract the young the researchers of this field.

LDPE cracking over mono- and divalent metal-doped beta zeolites

This study evaluates the effect of loading various mono and divalent metals in Beta zeolite on low-density polyethylene (LDPE) cracking. We revealed that Tl and Ba ions enhanced Lewis acidity, leading to higher catalytic activity on LDPE cracking.

Microwave-assisted depolymerization of lignin with synergic alkali catalysts and a transition metal catalyst in the aqueous system

In this study, synergic alkali catalysts (NaOH + NaAlO2) and Ni/ZrO2 were used for microwave-assisted lignin depolymerization.

Effect of crystallization mechanism on zeolite BEA textural and acidic properties

Two zeolite BEA catalysts have been synthesized via alternative mechanistic pathways involving solution-mediated transportation and solid-solid hydrogel rearrangement. In the synthetic procedures selected, the composition of starting reaction mixtures and...

Ab initio molecular dynamics with enhanced sampling in heterogeneous catalysis

Enhanced sampling ab initio simulations enable to study chemical phenomena in catalytic systems including thermal effects & anharmonicity, & collective dynamics describing enthalpic & entropic contributions, which can significantly impact on reaction free energy landscapes.

Zeolites in catalysis: sustainable synthesis and its impact on properties and applications

Zeolites are versatile catalysts not only for large scale petrochemical processes but also in applications related to fine chemicals synthesis, biomass conversion and CO2 utilization. Introduction of mesopores and heteroatoms...

Tailoring Competitive Adsorption Sites by Oxygen-Vacancy on Cobalt Oxides to Enhance the Electrooxidation of Biomass

The electrooxidation of 5-hydroxymethylfurfural (HMF) offers a promising green route to attain high-value chemicals from biomass. The HMF electrooxidation reaction (HMFOR) is a complicated process involving the combined adsorption and coupling of organic molecules and OH^- on the electrode surface. An in-depth understanding of these adsorption sites and reaction processes on electrocatalysts is fundamentally important. Herein, the adsorption behavior of HMF and OH^- , and the role of oxygen vacancy on Co₃ O₄ are initially unraveled. Correspondingly, instead of the competitive adsorption of OH^- and HMF on the metal sites, it is observed that the OH^- can fill into oxygen vacancy (Vo) prior to couple with organic molecules through lattice oxygen oxidation reaction process, which could accelerate the rate-determining step of the dehydrogenation of 5-hydroxymethyl-2-furancarboxylic acid (HMFCA) intermediates. With the modulated adsorption sites, the as-designed Vo-Co₃ O₄ shows excellent activity for HMFOR with the earlier potential of 90 and 120 mV at 10 mA cm^-2 in 1 m KOH and 1 m PBS solution. This work sheds insight on the catalytic mechanism of oxygen vacancy, which benefits designing a novel electrocatalysts to modulate the multi-molecules combined adsorption behaviors.

Cellulose hydrogenolysis to alcohol and ketone products using Co@C catalysts in the phosphoric acid aqueous solution

Combining encapsulated Co@C catalyst and H3PO4 aqueous solution, high value-added chemicals that are widely used in various fields can be obtained from renewable biomass materials.

Controlling Nucleation Pathways in Zeolite Crystallization: Seeding Conceptual Methodologies for Advanced Materials Design

A core objective of synthesizing zeolites for widespread applications is to produce materials with properties and corresponding performances that exceed conventional counterparts. This places an impetus on elucidating and controlling processes of crystallization where one of the most critical design criteria is the ability to prepare zeolite crystals with ultrasmall dimensions to mitigate the deleterious effects of mass transport limitations. At the most fundamental level, this requires a comprehensive understanding of nucleation to address this ubiquitous materials gap. This Perspective highlights recent methodologies to alter zeolite nucleation by using seed-assisted protocols and the exploitation of interzeolite transformations to design advanced materials. Introduction of crystalline seeds in complex growth media used to synthesize zeolites can have wide-ranging effects on the physicochemical properties of the final product. Here we discuss the diverse pathways of zeolite nucleation, recent breakthroughs in seed-assisted syntheses of nanosized and hierarchical materials, and shortcomings for developing generalized guidelines to predict synthesis outcomes. We offer a critical analysis of state-of-the-art approaches to tailor zeolite crystallization wherein we conceptualize whether parallels between network theory and zeolite synthesis can be instrumental for translating key findings of individual discoveries across a broader set of zeolite crystal structures and/or synthesis conditions.

Experimental and Computational Approaches for the Structural Study of Novel Ca-Rich Zeolites from Incense Stick Ash and Their Application for Wastewater Treatment

At present, chemical Si/Al sources are mainly used as precursor materials for the manufacturing of zeolites. Such precursor materials are quite expensive for commercial synthesis. Here, we have reported the synthesis of Ca-based zeolite from incense stick ash waste by the alkali-treatment method for the first time. Incense stick ash (ISA) was used as a precursor material for the synthesis of low Si zeolites by the alkali-treatment method. The as-synthesized zeolites were characterized by various instruments like particle size analyzer (PSA), Fourier transform infrared (FTIR), X-ray diffraction (XRD), field emission scanning electron microscope (FESEM), electron diffraction spectroscopy (EDS), transmission electron microscopy (TEM), and X-ray fluorescence (XRF). FTIR and XRD helped in the identification of the microstructure and crystalline nature of the zeolites and also confirmed the synthesis of Ca-based zeolite with two thetas at 25.7°. The microscopic analysis by FESEM and TEM exhibited that the size of synthesized Ca-rich zeolites varies from 200 to 700 nm and they are aggregated and cuboidal in shape. Additionally, structural, electronic, and density of states’ characteristics of gismondine (Ca2Al4Si4O16·9H2O) structures were evaluated by computational simulations (first principle, density functional theorem). The structural optimization of structures was carried out in the first stage under the lowest condition of total energy and forces acting on atoms for the lattice constant, as well as the available experimental and theoretical findings. The present research approach predicted the transformation of ISA waste into a value-added mineral, i.e., zeolite, which was further used for the removal of both heavy metals and alkali metals from fly ash-based wastewater using inductively coupled plasma-optical emission spectroscopy (ICP-OES).

Recent Advances in the Brønsted/Lewis Acid Catalyzed Conversion of Glucose to HMF and Lactic Acid: Pathways toward Bio-Based Plastics

One of the most trending topics in catalysis recently is the use of renewable sources and/or non-waste technologies to generate products with high added value. That is why, the present review resumes the advances in catalyst design for biomass chemical valorization. The variety of involved reactions and functionality of obtained molecules requires the use of multifunctional catalyst able to increase the efficiency and selectivity of the selected process. The use of glucose as platform molecule is proposed here and its use as starting point for biobased plastics production is revised with special attention paid to the proposed tandem Bronsted/Lewis acid catalysts.

A Cooperative OSDA Blueprint for Highly Siliceous Faujasite Zeolite Catalysts with Enhanced Acidity Accessibility

A cooperative OSDA strategy is demonstrated, leading to novel high-silica FAU zeolites with a large potential for disruptive acid catalysis. In bottom-up synthesis, the symbiosis of choline ion (Ch⁺ ) and 15-crown-5 (CE) was evidenced, in a form of full occupation of the sodalite (sod) cages with the trans Ch⁺ conformer, induced by the CE presence. CE itself occupied the supercages along with additional gauche Ch⁺ , but in synthesis without CE, no trans was found. The cooperation, and thus the fraction of trans Ch⁺ , was closely related to the Si/Al ratio, a key measure for FAU stability and acidity. As such, a bottom-up handle for lowering the Al-content of FAU and tuning its acid site distribution is shown. A mechanistic study demonstrated that forming sod cages with trans Ch⁺ is key to the nucleation of high-silica FAU zeolites. The materials showed superior performances to commercial FAU zeolites and those synthesized without cooperation, in the catalytic degradation of polyethylene.

High-Performance Room Temperature Lithium-Ion Battery Solid Polymer Electrolytes Based on Poly(vinylidene fluoride-co-hexafluoropropylene) Combining Ionic Liquid and Zeolite

The demand for more efficient energy storage devices has led to the exponential growth of lithium-ion batteries. To overcome the limitations of these systems in terms of safety and to reduce environmental impact, solid-state technology emerges as a suitable approach. This work reports on a three-component solid polymer electrolyte system based on poly(vinylidene fluoride-co-hexafluoropropylene) (PVDF-HFP), the ionic liquid 1-butyl-3-methylimidazolium thiocyanate ([BMIM][SCN]), and clinoptilolite zeolite (CPT). The influences of the preparation method and of the dopants on the electrolyte stability, ionic conductivity, and battery performance were studied. The developed electrolytes show an improved room temperature ionic conductivity (1.9 × 10^-4 S cm^-1), thermal stability (up to 300 °C), and mechanical stability. The corresponding batteries exhibit an outstanding room temperature performance of 160.3 mAh g^-1 at a C/15-rate, with a capacity retention of 76% after 50 cycles. These results represent a step forward in a promising technology aiming the widespread implementation of solid-state batteries.

Unlocking the Potential of Hidden Sites in Faujasite: New Insights in a Proton Transfer Mechanism

Zeolite Y and its ultra-stabilized hierarchical derivative (USY) are the most widely used zeolite-based heterogeneous catalysts in oil refining, petrochemisty, and other chemicals manufacturing. After almost 60 years of academic and industrial research, their resilience is unique as no other catalyst displaced them from key processes such as FCC and hydrocracking. The present study highlights the key difference leading to the exceptional catalytic performance of USY versus the parent zeolite Y in a multi-technique study combining advanced spectroscopies (IR and solid-state NMR) and molecular modeling. The results highlight a hitherto unreported proton transfer involving inaccessible active sites in sodalite cages that contributes to the exceptional catalytic performance of USY.

Impact of Xylose on Dynamics of Water Diffusion in Mesoporous Zeolites Measured by NMR

Zeolites are known to be effective catalysts in biomass converting processes. Understanding the mesoporous structure and dynamics within it during such reactions is important in effectively utilizing them. Nuclear magnetic resonance (NMR) T₂ relaxation and diffusion measurements, using a high-power radio frequency probe, are shown to characterize the dynamics of water in mesoporous commercially made 5A zeolite beads before and after the introduction of xylose. Xylose is the starting point in the dehydration into furfural. The results indicate xylose slightly enhances rotational mobility while it decreases translational motion through altering the permeability, K, throughout the porous structure. The measurements show xylose inhibits pure water from relocating into larger pores within the zeolite beads where it eventually is expelled from the bead itself.

The Promoter Role of Amines in the Condensation of Silicic Acid: A First-Principles Investigation

Though well-recognized, the molecular-level understanding of the multifunctional roles of amines in the condensation of polysilicic acids, which is one of the key processes in hydrothermal synthesis of zeolites, is still limited. Taking ethylamine as a prototype, we investigated the mechanism of polysilicic acid condensation in the existence of organic amines in aqueous solution with extensive first-principles-based calculations. Because of the high proton affinity, ethylamine exists as amine silicates and alters the subsequent condensation mechanisms from a 1-step lateral attack mechanism accompanied with simultaneous intermolecular proton transfer in neutral aqueous solution to a 2-step SN2-like mechanism. Specifically, the 5-coordinated Si species that were not observed on pathways of condensation in neutral solution are effectively stabilized by the ethylamine cations as intermediates, and the barriers for condensation of ortho-silicic acid are significantly reduced from 133 kJ/mol in neutral solution to 58 and 63 kJ/mol for formation of the 5-coordinated Si intermediate and proton transfer for water release, respectively. Similar variations of mechanisms and barriers for condensation were also observed in the formation of cyclic trimers as well as linear and cyclic tetramers of ortho-silicic acids. Based on these, it was proposed that apart from acting as structure-directing agents, pore fillers, and pH adjusters, organic amines can also function as promoters in the condensation of polysilicic acids.

Wet organic waste treatment via hydrothermal processing: A critical review

There are several recent reviews published in the literature on hydrothermal carbonization, liquefaction and supercritical water gasification of lignocellulosic biomass and algae. The potential of hydrochar, bio-oil or synthesis gas production and applications have also been reviewed individually. The comprehensive review on the hydrothermal treatment of wet wastes (such as municipal solid waste, food waste, sewage sludge, algae) covering carbonization, liquefaction and supercritical water gasification, however, is missing in the literature which formed the basis of the current review paper. The current paper critically reviews the literature around the full spectrum of hydrothermal treatment for wet wastes and establishes a good comparison of the different hydrothermal treatment options for managing wet waste streams. Also, the role of catalysts as well as synthesis of catalysts using hydrothermal treatment of biomass has been critically reviewed. For the first time, efforts have also been made to summarize findings on modelling works as well as techno-economic assessments in the area of hydrothermal treatments of wet wastes. The study concludes with key findings, knowledge gaps and future recommendations to improve the productivity of hydrothermal treatment of wet wastes, helping improve the commercial viability and environmental sustainability.

On the key role of aluminium and other heteroatoms during interzeolite conversion synthesis

Interzeolite conversion, a synthesis technique for several zeolite frameworks, has recently yielded a large amount of high-performing catalytic zeolites. Yet, the mechanisms behind the success of interzeolite conversion remain unknown. Conventionally, small oligomers with structural similarity between the parent and daughter zeolites have been proposed, despite the fact these have never been observed experimentally. Moreover, recent synthesis examples contradict the theory that structural similarity between the parent and daughter zeolites enhances interzeolite conversion. In this perspective it is proposed that heteroatoms, such as aluminium, are key players in the processes that determine the successful conversion of the parent zeolite. The role of Al during parent dissolution, and all consecutive stages of crystallization, are discussed by revising a vast body of literature. By better understanding the role of Al during interzeolite conversions, it is possible to elucidate some generic features and to propose some synthetic guidelines for making advantageous catalytic zeolites. The latter analysis was also expanded to the interconversion of zeotype materials where heteroatoms such as tin are present.

The crucial roles of aluminium in driving and controlling interzeolite conversion, a useful catalyst synthesis protocol, are put under scrutiny.

Recent advances in lignocellulose prior-fractionation for biomaterials, biochemicals, and bioenergy

Due to over-consumption of fossil resources and environmental problems, lignocellulosic biomass as the most abundant and renewable materials is considered as the best candidate to produce biomaterials, biochemicals, and bioenergy, which is of strategic significance and meets the theme of Green Chemistry. Highly efficient and green fractionation of lignocellulose components significantly boosts the high-value utilization of lignocellulose and the biorefinery development. However, heterogeneity of lignocellulosic structure severely limited the lignocellulose fractionation. This paper offers the summary and perspective of the extensive investigation that aims to give insight into the lignocellulose prior-fractionation. Based on the role and structure of lignocellulose component in the plant cell wall, lignocellulose prior-fractionation can be divided into cellulose-first strategy, hemicelluloses-first strategy, and lignin-first strategy, which realizes the selective dissociation and transformation of a component in lignocellulose. Ultimately, the challenges and opportunities of lignocellulose prior-fractionation are proposed on account of the existing problems in the biorefining valorization.