Functional supramolecular gels based on pillar[n]arene macrocycles

Protonation-Triggered Supramolecular Gel from Macrocyclic Diacetylene: Gelation Behavior, Topochemical Polymerization, and Colorimetric Response

Supramolecular gels originating from the hierarchical self-assembly of low molecular weight organic molecules is a strongly emerging field of advanced material research for the fabrication of soft functional materials. Herein, a novel supramolecular gel was fabricated through the protonation-triggered unidirectional self-assembly of pyridine-attached macrocyclic diacetylene (PyMCDA). Basic nitrogen of a pyridine ring with a strong affinity toward proton transforms the neutral PyMCDA into gelator in its protonated pyridinium salt form (PyMCDA-H⁺), which further evolves to nano-fibrillar networks to yield a supramolecular gel. Under the irradiation of UV light, the white color gel turned to a robust covalently cross-linked blue-phase PDA gel. Interestingly, polymeric PyMCPDA-H⁺ gel exhibits a naked-eye detectable reversible blue-red colorimetric response for alternating acid/base (H₂SO₄/NH₄OH) and colorimetric sensitivity toward selected anions: CH₃COO^-, CN^-, HCOO^-, and CH₃CH₂COO^-. It is with the hope that this work point toward the utility and versatility of macrocyclic PDAs for constructing chromogenic supramolecular gels for their possible use in sensing systems.

Metal-Free White Light-Emitting Fluorescent Material Based on Simple Pillar[5]arene-tripodal Amide System and Theoretical Insights on Its Assembly and Fluorescent Properties

The booming of host-guest assembly-based supramolecular chemistry provides abundant ways to construct functional systems and materials. Attracted by the important application prospect of white light emission and aggregation-induced emission (AIE) materials, herein, we report an efficient way for fabricating metal-free white light-emitting AIE materials through the supramolecular assembly of simple organic compounds: methoxyl pillar[5]arene (MP5) and tri-(pyridine-4-ylamido)benzene (TAP). By host-guest assembly, MP5 and TAP formed a supramolecular polymer (MP5-T); meanwhile, the MP5-T xerogel powder emitted white light at CIE coordinates (0.29 and 0.29). The supramolecular assembly and white light-emitting mechanisms were carefully investigated by experiments as well as quantum chemical calculations including density functional theory (DFT), reduced density gradient, electrostatic surface potential, independent gradient model, and frontier molecular orbital (highest-occupied molecular orbital-lowest-unoccupied molecular orbital) analyses. Interestingly, according to the experiments and calculations, the supramolecular assembly is critical in the white light-emitting phenomenon. Moreover, in this work, the quantum chemical calculations could not only support experimental phenomena but also provide deep understanding and visualized presentation of the assembly and emission mechanism. In addition, the obtained MP5-T solid powder could serve as a novel and easy means to make material for white light-emitting devices.

A pillar[5]arene-based fluorescent sensor for sensitive detection of L-Met through a dual-site collaborative mechanism

L-Methionine (L-Met) is one of the essential amino acids in human health, efficiently detect L-Met is a significant issue. Herein, a concept "dual-site collaborative recognition" had been successfully introduced into the design and achieved high selective and sensitive recognition of L-Met. In order to realize the "dual-site collaborative recognition", we rationally designed and synthesized an ester functionalized pillar[5]arene-based fluorescent sensor (SP5). And it shows blue Aggregation-induced emission (AIE) fluorescence. In the SP5, the pillar[5]arene group act as C-H···π interactions site, and ester group serve as multi hydrogen bonding acceptor. Interestingly, the SP5 exhibited high selectivity and sensitivity (2.84 × 10^-8 M) towards L-Met based on the collaboration of electron-rich cavernous pillar[5]arene group and ester group through C-H···π and H-bond interactions, respectively. This "dual-site collaborative recognition" mechanism has been investigated by ¹H NMR, ESI-MS and theoretical calculation including frontier orbital (HOMO and LUMO), electrostatic potential (ESP) and the noncovalent interaction (NCI). These theoretical calculations not only support the proposed host-guest recognition mechanism, but also provided visualized information on the "dual-site collaborative recognition" mode. Furthermore, the concept "dual-site collaborative recognition" is an effective strategy for easily detecting biological molecules.

Investigation of the Mechanism Behind Conductive Fluorescent and Multistimuli-responsive Li+ -enriched Metallogel Formation

A fluorescent metallogel (2.6 % w/v) has been obtained from two non-fluorescent components viz. phenyl-succinic acid derived pro-ligand H₂ PSL and LiOH (2 equiv.) in DMF. Li⁺ ion not only plays a crucial role in gelation through aggregation, but also contributed towards enhancement of fluorescence by imposing restriction over excited state intramolecular proton transfer (ESIPT) followed by origin of chelation enhanced fluorescence (CHEF) phenomenon. Further, the participation of CHEF followed by aggregation-caused quenching (ACQ) and aggregation-induced emission (AIE) in the gelation process have been well established by fluorescence experiments. Transmission electron microscopy (TEM) analysis disclosed the sequential creation of nanonuclei followed by nanoballs and their alignment towards the generation of fibers of about 3, 31 and 40 nm diameter, respectively. The presence of a long-range fibrous morphology inside the metallogel was further attested by scanning electron microscopy (SEM). Rheological studies on the metallogel showed its true gel-phase material nature. Nyquist impedance study shows a resistance value of 7.4 kΩ for the metallogel which upon applying ultrasound increased to 8.5 kΩ, while an elevated temperature of 70 °C caused reduction in the resistance value to 4.8 kΩ. The mechanism behind metallogel formation has been well established by using FTIR, UV-vis, SEM, TEM, PXRD, ¹ H NMR, fluorescence and ESI-MS.

Temperature-Dependent and pH-Responsive Pillar[5]arene-Based Complexes and Hydrogen-Bond-Based Supramolecular Pentagonal Boxes in Water

Supramolecular systems in water are of paramount importance and those based on hydrogen bonds are both intriguing and scarce. Here, after studying the peculiar host-guest complexes formed between per-dimethylamino-pillar[5]arene (1) and the bis-sulfonates 2 a-c, we describe the formation of the first hydrogen-bond-based supramolecular pentagonal boxes (SPBs), which are stable in water. These pH-responsive SPBs are constructed from 1 as a body, benzene polycarboxylic acids 3 a,b as lid compounds, and 2 a-c as guests. We demonstrate that encapsulation of 2 a-c in pillar[5]arene 1 and in the highly stable water-soluble SPBs, that is, 1(3 a)₂ and 1(3 b)₂ , is both temperature and pH dependent and, quite interestingly, depends, on the nature of the lid compounds used for capping the boxes even at high pH. We also highlight the difference in the ¹ H NMR characteristics of 2 b and 2 c in the cavity of 1 and the SPBs.

Rational Design and Bulk Synthesis of Water-Containing Supramolecular Polymers

The utilization of structural water in chemical self-assembly has not only effectively eliminated the negative influences of solvents from solutions or gels but has also provided new insight into the fabrication of new materials in bulk. However, up to now, supramolecular polymerization triggered by structural water has been dominated more by serendipity than rational design. After carefully analyzing the chemical structures of artificial monomers and gaining a deep understanding of the water-triggered assembly process, we report herein the bulk formation of polymeric materials from water and low-molecular weight monomers by rational design instead of serendipity.

Linear tri-pillar[5]arene-based acceptor for efficiently separate paraquat from water through collaboration effect

Paraquat, one of non-selective herbicides, is widely used in agricultural production. However, it can cause death of people or animals quickly owing to its fatal toxicity. In the present work, for efficient separation and removal of the paraquat, a concept "employ collaboration effect to enhance the Host-Guest interactions" was rationally introduced into the design of paraquat adsorbent material. According to this concept, a novel linear tri-pillar[5]arene-based acceptor molecule was synthesized. Interestingly, the acceptor shows outstanding adsorption properties for paraquat through the collaboration effect of the adjacent pillar[5]arene moieties in the linear tri-pillar[5]arene acceptor. Compared with other adsorbents such as activated carbon and single-pillar[5]arene-based adsorbent materials, the linear tri-pillar[5]arene acceptor shows higher adsorption rate for paraquat. Additionally, the linear tri-pillar[5]arene acceptor was applied to adsorb the commercial pesticide paraquat sample in water with adsorption rate of 98%. Therefore, the linear tri-pillar[5]arene acceptor could serve as a paraquat adsorbent material and convey greatly potential application in the field of removal of paraquat. The concept "employ collaboration effect to enhance the Host-Guest interactions" is a useful way for the development of adsorption materials.

Tunable nanogels by host-guest interaction with carboxylate pillar[5]arene for controlled encapsulation and release of doxorubicin

Nanogels have become one of the most attractive systems for application as delivery vectors or for theragnostic approaches in nanomedicine, which is mainly related to the ease of their synthesis by precipitation polymerization. However, only a few suitable monomers have been reported so far and stabilization of the nanogels requires the incorporation of rather defined amounts of in most cases charged co-monomers, such as acrylic acid, which limits the flexibility in their design. Here, we present an alternative approach using a pyridinium based monomer, which not only provides stability due to the positive charge, but also allows the attachment of functional carboxylate-pillar[5]arene by the formation of a host-guest complex. This approach is tested on pH-sensitive nanogels based on the monomer N-[(2,2-dimethyl-1,3-dioxolane)methyl]acrylamide (DMDOMA) featuring an acetal group, which is hydrolysed under acidic conditions. As carboxylates are known to catalyze this hydrolysis, we tested different amounts of carboxylate-pillar[5]arenes to tune the hydrolysis rate of the acetal group and found a direct correlation. Additional encapsulation studies with doxorubicin (DOX) revealed that surface potential and charge density represent additional key factors not only for the loading capacity, but also for the release profile of the nanogels. The option to tune such properties simply by the addition of a co-factor, in this case, the carboxylate-pillar[5]arenes provides a powerful tool to optimize characteristics of functional nanogels for drug delivery or other applications.

Transparency and AIE tunable supramolecular polymer hydrogel acts as TEA-HCl vapor controlled smart optical material

Stimuli-responsive optical materials attract lots of attention due to their broad applications. Herein, a novel smart stimuli-responsive supramolecular polymer was successfully constructed using a simple tripodal quaternary ammonium-based gelator (TH). The TH self-assembles into a supramolecular polymer hydrogel (TH-G) and shows aggregation-induced emission (AIE) properties. Interestingly, the transparency and fluorescence of the TH-G xerogel film (TH-GF) could be reversibly regulated by use of triethylamine (TEA) and hydrochloric acid (HCl) vapor. When alternately fumed with TEA and HCl vapor, the optical transmittance of the TH-GF was changed from 8.9% to 92.7%. Meanwhile, the fluorescence of the TH-G shows an "ON/OFF" switch. The reversible switching of the transparency and the fluorescence of the TH-GF is attributed to the assembly and disassembly of the supramolecular polymer TH-G. Based on these stimuli-response properties, the TH-GF could act as an optical material and shows potential applications as smart windows or fluorescent display material controlled by TEA and HCl vapor.

Multivalent Allyl-Substituted Macrocycles as Nonaggregating Building Blocks

Based on the concept of dual-directionality, the synthesis of two novel zinc(II)-containing phthalocyanine (Pc-ene1) and azaphthalocyanine (AzaPc-ene1) macrocycles bearing dual directional (up/down) allyl moieties on their rims is reported. Their structural identification, that is, NMR, FT-IR, UV-vis, MALDI-TOF spectral data, single crystal X-ray diffraction, and CHN elemental analyses, along with their nonaggregating behaviors in solvated media and crystalline forms has been confirmed.

Towards new nanoporous biomaterials: self-assembly of sulfopillar[5]arenes with vitamin D3 into supramolecular polymers

Novel water-soluble, deca-substituted pillar[5]arenes containing thiasulfate and thiacarboxylate fragments were synthesized and characterized. UV-vis, 2D 1H-1H NOESY and DOSY NMR spectroscopy revealed the ability of pillar[5]arenes containing thiasulfate fragments to form an inclusion complex with cholecalciferol (vitamin D3) in a 1 : 2 ratio (lg Kass = 2.2). Using DLS and SEM it was found that upon concentration and/or evaporation of the solvent, the supramolecular polymer (pillar[5]arene/vitamin D3 (1 : 2)) forms a porous material with an average wall diameter of 53 nm. It was shown that the supramolecular polymer is stable during photolysis by UV radiation (k1 = 1.7 × 10-5 s-1).

Pillar[5]arene-based supramolecular AIE hydrogel with white light emission for ultrasensitive detection and effective separation of multianalytes

A novel pillar[5]arene-based supramolecular AIE hydrogel (PDG) with white light emission was constructed. The PDG could be used for ultrasensitive detection and effective separation of multianalytes, and as fluorescent display materials.