Porous organic polymers for electrocatalysis

Covalent organic frameworks constructed from flexible building blocks: high porosity, crystallinity, and iodine uptake

Two covalent organic frameworks synthesized from flexible building blocks displayed good porosity, crystallinity, and high density of N and O atoms in the skeleton, which explained the high iodine capture ability at 5.51 g g−1.

Synthesis and Characterization of Benzene- and Triazine-Based Azo-Bridged Porous Organic Polymers

Porous organic polymers incorporating nitrogen-rich functionalities have recently emerged as promising materials for efficient and highly selective CO₂ capture and separation. Herein, we report synthesis and characterization of new two-dimensional (2D) benzene- and triazine-based azo-bridged porous organic polymers. Different synthetic approaches towards the porous azo-bridged polymers were tested, including reductive homocoupling of aromatic nitro monomers, oxidative homocoupling of aromatic amino monomers and heterocoupling of aromatic nitro monomers and a series of aromatic diamines of different lengths and rigidity. IR spectroscopy, ¹³C CP/MAS NMR spectroscopy, powder X-ray diffraction, elemental analysis, thermogravimetric analysis, nitrogen adsorption-desorption experiments and computational study were used to characterize structures and properties of the resulting polymers. The synthesized azo-bridged polymers are all amorphous solids of good thermal stability, exhibiting various surface areas (up to 351 m² g^-1). The obtained results indicated that the synthetic methods and building units have a pronounced effect on the porosity of the final materials. Reductive and oxidative homocoupling of aromatic nitro and amino building units, respectively, lead to 2D azo-bridged polymers of substantially higher porosity when compared to those produced by heterocoupling reactions. Periodic DFT calculations and Grand-canonical Monte Carlo (GCMC) simulations suggested that, within the used approximations, linear linkers of different lengths do not significantly affect CO₂ adsorption properties of model azo-bridged polymers.

Synthesis of a Triazaisotruxene-Based Porous Organic Polymer and Its Application in Iodine Capture

A new triazaisotruxene-based porous organic polymer (POP) was designed and successfully synthesized by a FeCl3-promoted crosslinking reaction. As a result of its porosity and good thermal stability, the designed POP can be utilized as a promising adsorbent for iodine, not only in the gaseous phase, but also in organic and aqueous solutions. Compared to its triazatruxene (TN) analogue, the ITN-based POP shows equal iodine uptake in the gaseous phase and in hexane solution, and better uptake in aqueous solution.

Construction of Atomic Metal-N2 Sites by Interlayers of Covalent Organic Frameworks for Electrochemical H2 O2 Synthesis

Electrosynthesis of H₂ O₂ is a promising alternative to the anthraquinone oxidation process because of its low energy utilization and cost-effectiveness. Heteroatom-doped carbons-based catalysts have been widely developed for H₂ O₂ synthesis. However, their doping degree, defective degree, and location of active sites are difficult to be preciously controlled at molecular level. Herein, a dioxin-linked covalent organic framework (COF) is used as the template to preciously construct different metal-N₂ sites along the porous walls for H₂ O₂ synthesis. By tuning the metal centers, the catalyst with Ca-N₂ sites enables to catalyze H₂ O₂ production with selectivity over 95% from 0.2 to 0.6 V versus RHE, while the H₂ O₂ yields for Co sites or Ni sites are 20% and 60% in the same potential range. In addition, the turnover frequency (TOF) values for Ca-N₂ sites are 11.63 e^-1 site^-1 s^-1 , which are 58 and 20 times higher than those of Co and Ni sites (0.20 and 0.57 e^-1 site^-1 s^-1 ). The theoretical calculations further reveal that the OOH* desorption on Ca sites is easier than those on Co or Ni sites, and thus catalyzes the oxygen reduction reaction in the 2e^- pathway with high efficiency.

Fluorine-Containing Covalent Organic Frameworks: Synthesis and Application

Covalent organic frameworks (COFs) are a type of crystalline porous polymers that possess ordered structures and eternal pores. Because of their unique structural characteristics and diverse functional groups, COFs have been used in various application fields, such as adsorption, catalysis, separation, ion conduction, and energy storage. Among COFs, the fluorine-containing COFs (fCOFs) have been developed for special applications by virtue of special physical and chemical properties resulting from fluorine element, which is a nonmetallic halogen element and possesses strong electronegativity. In the organic chemistry field, introducing fluorine into chemicals enables those chemicals to exhibit many interesting properties, and fluorine chemistry increasingly plays an important role in the history of chemical development. The introduction of fluorine in COFs can enhance the crystallinity, porosity, and stability of COFs, making COFs having superior performances and some new applications. In this review, the synthesis and application of fCOFs are systematically summarized. The application involves photocatalytic production of hydrogen peroxide, photocatalytic water splitting, electrocatalytic CO₂ reduction, adsorption for different substances (H₂ , pesticides, per-/polyfluoroalkyl substances, polybrominated diphenyl ethers, bisphenols, and positively charged organic dye molecules), oil-water separation, energy storage (e.g., zinc-ion batteries, lithium-sulfur batteries), and proton conduction. Perspectives of remaining challenges and possible directions for fCOFs are also discussed.

Covalent Organic Frameworks with Ionic Liquid-Moieties (ILCOFs): Structures, Synthesis, and CO2 Conversion

CO₂, an acidic gas, is usually emitted from the combustion of fossil fuels and leads to the formation of acid rain and greenhouse effects. CO₂ can be used to produce kinds of value-added chemicals from a viewpoint based on carbon capture, utilization, and storage (CCUS). With the combination of unique structures and properties of ionic liquids (ILs) and covalent organic frameworks (COFs), covalent organic frameworks with ionic liquid-moieties (ILCOFs) have been developed as a kind of novel and efficient sorbent, catalyst, and electrolyte since 2016. In this critical review, we first focus on the structures and synthesis of different kinds of ILCOFs materials, including ILCOFs with IL moieties located on the main linkers, on the nodes, and on the side chains. We then discuss the ILCOFs for CO₂ capture and conversion, including the reduction and cycloaddition of CO₂. Finally, future directions and prospects for ILCOFs are outlined. This review is beneficial for academic researchers in obtaining an overall understanding of ILCOFs and their application of CO₂ conversion. This work will open a door to develop novel ILCOFs materials for the capture, separation, and utilization of other typical acid, basic, or neutral gases such as SO₂, H₂S, NOx, NH₃, and so on.

Metalated covalent organic frameworks: from synthetic strategies to diverse applications

Covalent organic frameworks (COFs) are a class of organic crystalline porous materials discovered in the early 21st century that have become an attractive class of emerging materials due to their high crystallinity, intrinsic porosity, structural regularity, diverse functionality, design flexibility, and outstanding stability. However, many chemical and physical properties strongly depend on the presence of metal ions in materials for advanced applications, but metal-free COFs do not have these properties and are therefore excluded from such applications. Metalated COFs formed by combining COFs with metal ions, while retaining the advantages of COFs, have additional intriguing properties and applications, and have attracted considerable attention over the past decade. This review presents all aspects of metalated COFs, from synthetic strategies to various applications, in the hope of promoting the continued development of this young field.

Transformation of Porous Organic Cages and Covalent Organic Frameworks with Efficient Iodine Vapor Capture Performance

The reaction of 5,5'-([2,2'-bipyridine]-5,5'-diyl)diisophthalaldehyde (BPDDP) with cyclohexanediamine and [benzidine (BZ)/[2,2'-bipyridine]-5,5'-diamine (BPDA)], respectively, affords a nitrogen-rich porous organic cage BPPOC and two two-dimensional (2D) covalent organic frameworks (COFs), USTB-1 and USTB-2 (USTB = University of Science and Technology Beijing), under suitable conditions. Interestingly, BPPOC with a single-crystal X-ray diffraction structure is able to successfully transform into USTB-1 and USTB-2 (newly converted COFs denoted as USTB-1c and USTB-2c, respectively) upon exchange of the imine unit of cyclohexanediamine in the cage by BZ and BPDA. Such a transformation also enables the isolation of analogous COFs (USTB-3c and USTB-4c) on the basis of an isostructural organic cage, BTPOC, which is derived from 5,5'-([2,2'-bithiophene]-4,4'-diyl)diisophthalaldehyde (BTDDP) and cyclohexanediamine. However, the conventional solvothermal reaction between BTDDP and BPDA leads to an impure phase of USTB-4 containing incompletely converted aldehyde groups due to the limited solubility of the building block. The newly prepared COFs have been characterized by nuclear magnetic resonance spectroscopy, Fourier transform infrared spectroscopy, scanning electron microscopy, and transmission electron microscopy. In particular, BPPOC is able to absorb the iodine vapor with an uptake of 5.64 g g^-1, breaking the porous organic cage's (POC's) record value of 3.78 g g^-1. Nevertheless, the cage-derived COFs exhibit improved iodine vapor adsorption capability in comparison with the directly synthesized counterparts, with the highest uptake of 5.80 g g^-1 for USTB-1c. The mechanism investigation unveils the superiority of nitrogen atoms to sulfur atoms for POCs in iodine vapor capture with the assistance of definite crystal structures. This, in combination with porosity, synergistically influences the iodine vapor capture capacity of COFs.

Metal-Corrole-Based Porous Organic Polymers for Electrocatalytic Oxygen Reduction and Evolution Reactions

Integrating molecular catalysts into designed frameworks often enables improved catalysis. Compared with porphyrin-based frameworks, metal-corrole-based frameworks have been rarely developed, although monomeric metal corroles are usually more efficient than porphyrin counterparts for the electrocatalytic oxygen reduction reaction (ORR) and oxygen evolution reaction (OER). We herein report on metal-corrole-based porous organic polymers (POPs) as ORR and OER electrocatalysts. M-POPs (M=Mn, Fe, Co, Cu) were synthesized by coupling metal 10-phenyl-5,15-(4-iodophenyl)corrole with tetrakis(4-ethynylphenyl)methane. Compared with metal corrole monomers, M-POPs displayed significantly enhanced catalytic activity and stability. Co-POP outperformed other M-POPs by achieving four-electron ORR with a half-wave potential of 0.87 V vs. RHE and reaching 10 mA cm^-2 OER current density at 340 mV overpotential. This work is unparalleled to develop and explore metal-corrole-based POPs as electrocatalysts.

Porous Organic Polymers: Promising Testbed for Heterogeneous Reactive Oxygen Species Mediated Photocatalysis and Nonredox CO2 Fixation

Catalysts play a pivotal role in achieving the global need for food and energy. In this context, porous organic polymers (POPs) with high surface area, robust architecture, tunable pore size, and chemical functionalities have emerged as promising testbeds for heterogeneous catalysis. Amorphous POPs having functionalized interconnected hierarchical porous structures activate a diverse range of substrates through covalent/non-covalent interactions or act as a host matrix to encapsulate catalytically active metal centers. On the other hand, conjugated POPs have been explored for photoinduced chemical transformations. In this personal account, we have delineated the evolution of various POPs and the specific role of pores and pore functionalities in heterogeneous catalysis. Subsequently, we retrospect our journey over the last ten years towards designing and fabricating amorphous POPs for heterogeneous catalysis, specifically photocatalytic reactive oxygen species (ROS)-mediated organic transformations and nonredox chemical fixation of CO₂ . We have also outlined some of the future avenues of POPs and POP-based hybrid materials for diverse catalytic applications.

Dual active sites in a triazine-based covalent organic polymeric framework promoting oxygen reduction reaction

A new significant feature of a triazine-based covalent organic polymer electrocatalyst is demonstrated. The metal-free electrocatalyst has dual-active sites, which enable it to entangle oxygen via a push-pull interaction that plays a crucial role in promoting the oxygen reduction reaction.