Scanning electrochemical microscopy of menadione-glutathione conjugate export from yeast cells

Quantitative visualization of passive transport across bilayer lipid membranes

The ability to predict and interpret membrane permeation coefficients is of critical importance, particularly because passive transport is crucial for the effective delivery of many pharmaceutical agents to intracellular targets. We present a method for the quantitative measurement of the permeation coefficients of protonophores by using laser confocal scanning microscopy coupled to microelectrochemistry, which is amenable to precise modeling with the finite element method. The technique delivers well defined and high mass transport rates and allows rapid visualization of the entire pH distribution on both the cis and trans side of model bilayer lipid membranes (BLMs). A homologous series of carboxylic acids was investigated as probe molecules for BLMs composed of soybean phosphatidylcholine. Significantly, the permeation coefficient decreased with acyl tail length contrary to previous work and to Overton's rule. The reasons for this difference are considered, and we suggest that the applicability of Overton's rule requires re-evaluation.

Effects of sampling rate on the interpretation of cellular transport measurements

Electrochemical sensing techniques are increasingly used to study biological processes by monitoring concentration changes of the molecule of interest close to cells. The measured concentration is the result of cellular transport across the cell membrane and diffusion of the released molecules from the cells to the sensing electrode. The objective of such experiments is to understand the cellular processes underlying the observed changes in concentration. Thus, the influence of mass transport on the measured concentration trace has to be removed. This is done by deconvolution of the impulse response function of diffusion from the concentration data. We have recently observed that measuring concentration at a sampling rate that satisfies the Nyquist criterion for the observed concentration dynamics may not be sufficient to correctly reconstruct cellular flux. This is because the impulse response function of diffusion also has to be represented with sufficient temporal resolution. We discuss this problem here using the example of monitoring drug efflux from a monolayer of cancer cells with microvoltammetry, and chloride secretion from an epithelial cell monolayer monitored with an ion-selective electrode.

Mediator-assisted simultaneous probing of cytosolic and mitochondrial redox activity in living cells

This work describes an electron transfer mediator-assisted amperometric flow injection method for assessing redox enzyme activity in different subcellular compartments of the phosphoglucose isomerase deletion mutant strain of Saccharomyces cerevisiae, EBY44. The method is demonstrated using the ferricyanide-menadione double mediator system to study the effect of dicoumarol, an inhibitor of cytosolic and mitochondrial oxidoreductases and an uncoupler of the electron transport chain. Evaluation of the role of NAD(P)H-producing pathways in mediating biological effects is facilitated by introducing either fructose or glucose as the carbon source, yielding either NADH or NADPH through the glycolytic or pentose phosphate pathway, respectively. Respiratory noncompetent cells show greater inhibition of cytosolic menadione-reducing enzymes when NADH rather than NADPH is produced. Spectrophotometric in vitro assays show no difference between the cofactors. Respiratory competent cells show cytosolic inhibition only when NADPH is produced, whereas production of NADH reveals uncoupling at low dicoumarol concentrations and inhibition of complexes III and IV at higher concentrations. Spectrophotometric assays only indicate the presence of cytosolic inhibition regardless of the reduced cofactor used. This article shows the applicability of the amperometric method and emphasizes the significance of determining biological effects of chemicals in living cells.

The Kv channel blocker 4-aminopyridine enhances Ag+ uptake: a scanning electrochemical microscopy study of single living cells

We report that silver ion (Ag(+)) uptake is enhanced by 4-aminopyridine (4-AP), a well known voltage-sensitive potassium ion channel (K(v)) blocker. Both bacterial (Escherichia coli) and mammalian (3T3 fibroblast) cells were used as model systems. Ag(+) uptake was monitored with a scanning electrochemical microscope with an amperometric Ag(+) ion-selective electrode (Ag(+)-ISE) and the respiration rates of E. coli cells were measured by oxygen reduction at an ultramicroelectrode. The results showed that not only the amount but also the rate of silver uptake by the cells increased significantly when 4-AP was added to the solution. For fibroblasts, the Ag(+) uptake rate was 4.8 x 10(7) ions per cell per sec without 4-AP compared with 1.0 x 10(8) ions per cell per sec with 0.2 mM 4-AP. For E. coli cells, the uptake rate was 1.5 x 10(4) ions per cell per sec without 4-AP vs. 3.5 x 10(4) ions per cell per sec with 0.5 mM 4-AP and 5.9 x 10(4) ions per cell per sec with 1 mM 4-AP. Thus, 4-AP might be useful where silver is used as antimicrobial agent to speed its uptake.

Determination of physiological thiols by electrochemical detection with piazselenole and its application in rat breast cancer cells 4T-1

Glutathione (GSH), the most abundant cellular thiol, has been shown to play an important role in maintaining cellular redox equilibrium that is pivotal for cell growth and function. In the present paper a novel electrochemical probe of piazselenole containing a Se-N bond was well developed for the determination of GSH. The cyclic voltammogram of piazselenole scanned at 100 mV/s displayed an irreversible reduction peak at -0.106 V (vs Ag/AgCl electrode) and a significant peak current decrease could be further provoked with the addition of GSH into piazselenole solution. On the basis of the peak current decrease of piazselenole recorded by differential pulse voltammetry with the increase of GSH concentration, a working curve was constructed for GSH determination in the range of 5.0 x 10(-10) approximately 2.2 x 10(-8) M with the linear regression equation as DeltaiP (10(-6)A) = 0.0952 + 0.4287 x CGSH (10(-8) M) and the detection limit (3sigma) as 83 pM. The proposed method was satisfactorily applied to the extracts of rat breast cancer cells 4T-1 for intracellular thiols detection.

Nanoelectrochemistry of mammalian cells

There is a significant current interest in development of new techniques for direct characterization of the intracellular redox state and high-resolution imaging of living cells. We used nanometer-sized amperometric probes in combination with the scanning electrochemical microscope (SECM) to carry out spatially resolved electrochemical experiments in cultured human breast cells. With the tip radius approximately 1,000 times smaller than that of a cell, an electrochemical probe can penetrate a cell and travel inside it without apparent damage to the membrane. The data demonstrate the possibility of measuring the rate of transmembrane charge transport and membrane potential and probing redox properties at the subcellular level. The same experimental setup was used for nanoscale electrochemical imaging of the cell surface.

Scanning electrochemical microscopy

This review describes work done in scanning electrochemical microscopy (SECM) since 2000 with an emphasis on new applications and important trends, such as nanometer-sized tips. SECM has been adapted to investigate charge transport across liquid/liquid interfaces and to probe charge transport in thin films and membranes. It has been used in biological systems like single cells to study ion transport in channels, as well as cellular and enzyme activity. It is also a powerful and useful tool for the evaluation of the electrocatalytic activities of different materials for useful reactions, such as oxygen reduction and hydrogen oxidation. SECM has also been used as an electrochemical tool for studies of the local properties and reactivity of a wide variety of materials, including metals, insulators, and semiconductors. Finally, SECM has been combined with several other nonelectrochemical techniques, such as atomic force microscopy, to enhance and complement the information available from SECM alone.

Advances in the application of scanning electrochemical microscopy to bioanalytical systems

Scanning electrochemical microscopy (SECM) is a powerful surface characterisation technique that allows for the electrochemical profiling of surfaces with sub micrometer resolution. While SECM has been most widely used to electrochemically study and profile non-biological surfaces and processes, the technique has in recent years, been increasingly used for the study of biological systems - and this is the focus of this review. An overview of SECM and how the technique may be applied to the study of biological systems will first be given. SECM and its application to the study of cells, enzymes and DNA will each be considered in detail. The review will conclude with a discussion of future directions and scope for further developments and applications.

Scanning electrochemical microscopy in the 21st century

The fundamentals of and recent advances in scanning electrochemical microscopy (SECM) are described. The focus is on applications of this method to studies of systems and processes of active current interest ranging from nanoelectrochemistry to electron transfer reactions and electrocatalysis to biological imaging.

Menadione stress in Saccharomyces cerevisiae strains deficient in the glutathione transferases

Using S. cerevisiae as a eukaryotic cell model we have analyzed the involvement of both glutathione transferase isoforms, Gtt1 and Gtt2, in constitutive resistance and adaptive response to menadione, a quinone which can exert its toxicity as redox cycling and/or electrophiles. The detoxification properties, of these enzymes, have also been analyzed by the appearance of S-conjugates in the media. Direct exposure to menadione (20 mM/60 min) showed to be lethal for cells deficient on both Gtt1 and Gtt2 isoforms. However, after pre-treatment with a low menadione concentration, cells deficient in Gtt2 displayed reduced ability to acquire tolerance when compared with the control and the Gtt1 deficient strains. Analyzing the toxic effects of menadione we observed that the gtt2 mutant showed no reduction in lipid peroxidation levels. Moreover, measuring the levels of intracellular oxidation during menadione stress we have shown that the increase of this oxidative stress parameter was due to the capacity menadione possesses in generating reactive oxygen species (ROS) and that both GSH and Gtt2 isoform were required to enhance ROS production. Furthermore, the efflux of the menadione-GSH conjugate, which is related with detoxification of xenobiotic pathways, was not detected in the gtt2 mutant. Taken together, these results suggest that acquisition of tolerance against stress generated by menadione and the process of detoxification through S-conjugates are dependent upon Gtt2 activity. This assessment was corroborated by the increase of GTT2 expression, and not of GTT1, after menadione treatment.

Scanning electrochemical microscopy: principles and applications to biophysical systems

This review highlights numerous and wide ranging biophysical and biochemical applications of scanning electrochemical microscopy (SECM). SECM instrumentation and theoretical modelling, necessary for experimental interpretation, are outlined, followed by a detailed discussion of the diverse applications of this technique. These include the measurement of flow through membranes, the determination of kinetic parameters of reactions, the investigation of the permeability of small molecules in tissues and monitoring biological processes, such as the production of oxygen or nitric oxide by cells. The significant impact of micro-electrochemical techniques on our understanding of basic physicochemical processes at biologically relevant interfaces is also considered. Studies reviewed include transport across and within bilayers and monolayers. Recent advances in SECM include the combination of SECM with other techniques, such as atomic force microscopy and optical microscopy. These developments are highlighted, along with prospects for the future.

Chemically imaging living cells by scanning electrochemical microscopy

Scanning electrochemical microscopy (SECM) is useful in probing and characterizing interfaces at high resolution. In this paper, the general principles of this technique are described and several applications of SECM to biological systems, particularly to living cells, is discussed, along with several example systems. Thiodione was detected and monitored electrochemically during the treatment of hepatocytes with cytotoxic menadione. The antimicrobial effects of silver(I) was followed by SECM through bacterial respiration. Living HeLa cells were shown to accumulate ferrocencemethanol (FcMeOH) and generated positive feedback for FcMeOH oxidation that can be further used to monitor the cell viability. Finally, individual giant liposomes, as cell models, with encapsulated redox compounds were successfully probed by SECM. In general SECM has the advantage of very high spatial resolution and versatility, especially for the detection of electroactive substances.

De Novo Design, Synthesis, and Characterization of Quinoproteins

Quinones and quinoproteins are essential redox components and enzymes in biological systems. Here, we report the de novo design, synthesis, and properties of model four-alpha-helix bundle quinoproteins. The proteins were designed and constructed from three different helices with 21 or 22 amino acid residues by chemoselective ligation to a cyclic decapeptide template. A free cysteine unit is placed at the hydrophobic core of the protein for binding of ubiquinone-0 and menaquinone-0 through a thioether bond. The quinoproteins with molecular weights of 11-12 kDa were characterized by electrospray ionization mass spectrometry, UV/Vis spectroscopy, size-exclusion chromatography, circular dichroism measurements, (1)H NMR spectroscopy, cyclic voltammetry, and redox-induced FTIR difference spectroscopy. The midpoint redox potentials at pH 8 in aqueous solution E(m,8) of thioether conjugates with N-acetyl cysteine methyl ester were 89 mV and -63 mV and with a synthetic protein 229 mV and 249 mV versus standard hydrogen electrode (SHE) for ubiquinone-0 and menaquinone-0, respectively. Detailed redox-induced FTIR difference spectroscopic studies of the model compounds and quinoproteins show the special resonance features for C=O bands at 1656-1660 and 1655-1665 cm(-1) due to the sulfur substitution to ubiquinone-0 and menaquinone-0, respectively. The construction of model quinoproteins represents a significant step toward more complex artificial redox systems.

Biological applications of scanning electrochemical microscopy: chemical imaging of single living cells and beyond

Recent applications of scanning electrochemical microscopy (SECM) to studies of single biological cells are reviewed. This scanning probe microscopic technique allows the imaging of an individual cell on the basis of not only its surface topography but also such cellular activities as photosynthesis, respiration, electron transfer, single vesicular exocytosis and membrane transport. The operational principles of SECM are also introduced in the context of these biological applications. Recent progress in techniques for high-resolution SECM imaging are also reviewed. Future directions, such as single-channel detection by SECM, high-resolution imaging with nanometer-sized probes, and combined SECM techniques for multidimensional imaging are also discussed.

Trehalose protects Saccharomyces cerevisiae from lipid peroxidation during oxidative stress

Aiming to focus the protective role of the sugar trehalose under oxidative conditions, two sets of Saccharomyces cerevisiae strains, having different profiles of trehalose synthesis, were used. Cells were treated either with a 10% trehalose solution or with a heat treatment (which leads to trehalose accumulation) and then exposed either to menadione (a source of superoxide) or to tert-butylhydroperoxide (TBOOH). According to our results, trehalose markedly increased viability upon exposure to menadione stress, which seems to be correlated with decrease in lipid peroxidation levels. The protective effect of trehalose against oxidative damage produced by menadione was especially efficient under SOD1 deficiency. On the other hand, this sugar does not seem to participate of the mechanism of acquisition of tolerance against TBOOH, since trehalose pretreatment (addition of external trehalose) was not capable of increase cell survival. Therefore, trehalose plays a role in protecting cells, especially membranes, from oxidative injuries. However, this mechanism of defense is dependent on the type of oxidative stress to which cells are submitted.

Cadmium-induced plant stress investigated by scanning electrochemical microscopy

In vivo oxygen evolution above single stomata in Brassica juncea has been used to investigate, for the first time, the effect of Cd-induced stress as imaged by scanning electrochemical microscopy (SECM). SECM images showed a clear stomatal structure-a pore, whose aperture is modulated by two guard cells, serving as the conduit for the oxygen produced. Lower stomatal density and larger stoma size were found in plants treated with 0.2 mM CdCl2 compared with control plants. Either the introduction of Cd caused a slower cell replication in the plane of the epidermis, hence fewer stomata, and/or the number of open stomata was reduced when plants were under Cd-stress. Oxygen evolution above individual stomatal complexes in Cd-treated plants was lower than that from control plants, as determined from the electrochemical current above the middle of each stoma. All guard cells under illumination were swollen, indicating that the stomata were open in both control and treated plants. Thus, decreased oxygen evolution in response to Cd cannot be attributed to simple closing of the stomata, but to a lower photosynthetic yield. SECM provides an excellent tool for monitoring the effects of Cd on photosynthetic activity at the scale of individual stomata.

Enhancing image quality of scanning electrochemical microscopy by improved probe fabrication and displacement

Scanning electrochemical microscopy (SECM) is a powerful tool for its wide applications in determining charge transfer kinetics, imaging chemical reactions and topography, as well as fabricating microstructures at various interfaces and (or) surfaces. Imaging applications, in particular, rely on the natures of SECM probes and the scanning systems to move them in the vicinity of interfaces. While progress has been made in new approaches to tip fabrication, there are few reports on the improvement of the tip positioning system to enhance SECM image quality. We have recently built an advanced SECM setup using a closed-loop scanning system and improved probe fabrication and characterization procedures. Here we will describe this development, as well as the application of these techniques to greatly improve the quality of SECM images. Video micrograph, cyclic voltammograms, and SECM approach curves (current vs. tip–substrate distance) were chosen to characterize probe quality and to determine the ratio of electrode diameter to glass sheath diameter. The SECM setup has a resolution and repeatability of 20 nm in three dimensions (x, y, and z) and can locate and relocate areas of interest precisely after a coarse image. Interdigitated electrode arrays of platinum and gold were first imaged. Image resolution revealed by sharpness of Pt band edges was enhanced by using a 2 µm diameter electrode. Pt or Au band height was found to be around 80–200 nm by fitting the approach curves to the theoretical ones. Imaging conditions such as delay time for a large step size between two succeeding data points were optimized. To test its thermal and temporal stability, the system was then used to image letters, which were printed on a transparency with font bold Courier New and font size 2. Minor drifts were found during the image process up to the experimental length of 8 h and 45 min. Letter thickness was found to be 1.0–1.2 µm. A silicon substrate with an array of square pits spaced apart on 10 µm centers was finally imaged. Good quality images were obtained at various tip–substrate distances even though the squares were just as small, if not smaller, than the tip. The samples were also imaged by AFM for comparison.Key words: scanning electrochemical microscopy, atomic force microscopy, microelectrode fabrication, closed-loop imaging, probe approach curve.

Menadione metabolism to thiodione in hepatoblastoma by scanning electrochemical microscopy

The cytotoxicity of menadione on hepatocytes was studied by using the substrate generation/tip collection mode of scanning electrochemical microscopy by exposing the cells to menadione and detecting the menadione-S-glutathione conjugate (thiodione) that is formed during the cellular detoxication process and is exported from the cell by an ATP-dependent pump. This efflux was electrochemically detected and allowed scanning electrochemical microscopy monitoring and imaging of single cells and groups of highly confluent live cells. Based on a constant flux model, approximately 6 x 10(6) molecules of thiodione per cell per second are exported from monolayer cultures of Hep G2 cells.

Scanning electrochemical microscopy: detection of human breast cancer cells by redox environment

Scanning electrochemical microscopy (SECM) can be used to measure the redox activity of individual human breast cells. A chemical mediator (e.g. quinone) that rapidly crosses the membrane participates in intracellular redox reactions that are recorded on a microsecond timescale by an ultramicroelectrode positioned close to the membrane. Measurements of redox reactivity yield rate constants that are different for cancerous and non-transformed human breast cells. With non-transformed or metastatic cells, rate constants are modulated by altered expression or activity of protein kinase Calpha, an enzyme involved in the mechanism of cell metastasis. When used in two-dimensional scanning, SECM produces a spatially resolved redox map of an individual cell or field of cells and can detect individual breast cancer cells in a field of non-transformed cells. These studies identify a new technology for cancer detection and establish a framework for future analysis of malignant cells in human breast tissues and biopsies.