A fourth class of theta-replicating plasmids: the pAM beta 1 family from gram-positive bacteria

Conjugative plasmid transfer in gram-positive bacteria

Conjugative transfer of bacterial plasmids is the most efficient way of horizontal gene spread, and it is therefore considered one of the major reasons for the increase in the number of bacteria exhibiting multiple-antibiotic resistance. Thus, conjugation and spread of antibiotic resistance represents a severe problem in antibiotic treatment, especially of immunosuppressed patients and in intensive care units. While conjugation in gram-negative bacteria has been studied in great detail over the last decades, the transfer mechanisms of antibiotic resistance plasmids in gram-positive bacteria remained obscure. In the last few years, the entire nucleotide sequences of several large conjugative plasmids from gram-positive bacteria have been determined. Sequence analyses and data bank comparisons of their putative transfer (tra) regions have revealed significant similarities to tra regions of plasmids from gram-negative bacteria with regard to the respective DNA relaxases and their targets, the origins of transfer (oriT), and putative nucleoside triphosphatases NTP-ases with homologies to type IV secretion systems. In contrast, a single gene encoding a septal DNA translocator protein is involved in plasmid transfer between micelle-forming streptomycetes. Based on these clues, we propose the existence of two fundamentally different plasmid-mediated conjugative mechanisms in gram-positive microorganisms, namely, the mechanism taking place in unicellular gram-positive bacteria, which is functionally similar to that in gram-negative bacteria, and a second type that occurs in multicellular gram-positive bacteria, which seems to be characterized by double-stranded DNA transfer.

Bacillus subtilis soil isolates: plasmid replicon analysis and construction of a new theta-replicating vector

We have searched for plasmids in a collection of 55 Bacillus subtilis strains isolated from various natural sources of the territory of Belarus. Twenty percent of the strains contained one or two plasmids of either 6-8 or approximately 90 kb. Small plasmids were shown to carry a rolling circle replicon of the pC194 type. Four out of the eight large plasmids contained a related theta replicon that has no homolog in databases as shown by sequence determination. A B. subtilis/Escherichia coli shuttle vector based on this replicon was constructed. It has a low copy number (6 units per chromosome) and is stably inherited in B. subtilis. It might thus be a useful tool for DNA cloning. These data extend previous observations, indicating that most of the small plasmids of B. subtilis replicate as rolling circles and belong to the pC194 family. On the contrary, large plasmids appear to form a large pool of theta-replicating determinants, since three different replicons have already been isolated from them.

Retrotransposition of the Ll.LtrB group II intron proceeds predominantly via reverse splicing into DNA targets

Catalytic group II introns are mobile retroelements that invade cognate intronless genes via retrohoming, where the introns reverse splice into double-stranded DNA (dsDNA) targets. They can also retrotranspose to ectopic sites at low frequencies. Whereas our previous studies with a bacterial intron, Ll.LtrB, supported frequent use of RNA targets during retrotransposition, recent experiments with a retrotransposition indicator gene indicate that DNA, rather than RNA, is a prominent target, with both dsDNA and single-stranded DNA (ssDNA) as possibilities. Thus retrotransposition occurs in both transcriptional sense and antisense orientations of target genes, and is largely independent of homologous DNA recombination and of the endonuclease function of the intron-encoded protein, LtrA. Models based on both dsDNA and ssDNA targeting are presented. Interestingly, retrotransposition is biased toward the template for lagging-strand DNA synthesis, which suggests the possibility of the replication folk as a source of ssDNA. Consistent with some use of ssDNA targets, many retrotransposition sites lack nucleotides critical for the unwinding of target duplex DNA. Moreover, in vitro the intron reverse spliced into ssDNA more efficiently than dsDNA substrates for some of the retrotransposition sites. Furthermore, many bacterial group II introns reside on the lagging-strand template, hinting at a role for DNA replication in intron dispersal in nature.

Restart of DNA replication in Gram-positive bacteria: functional characterisation of the Bacillus subtilis PriA initiator

The PriA protein was identified in Escherichia coli as a factor involved in the replication of extrachromosomal elements such as bacteriophage phiX174 and plasmid pBR322. Recent data show that PriA plays an important role in chromosomal replication, by promoting reassembly of the replication machinery during reinitiation of inactivated forks. A gene encoding a product 32% identical to the E.coli PriA protein has been identified in Bacillus subtilis. To characterise this protein, designated PriA(Bs), we constructed priA(Bs) mutants. These mutants are poorly viable, filamentous and sensitive to rich medium and UV irradiation. Replication of pAMbeta1-type plasmids, which is initiated through the formation of a D-loop structure, and the activity of the primosome assembly site ssiA of plasmid pAMbeta1 are strongly affected in the mutants. The purified PriA(Bs) protein binds preferentially to the active strand of ssiA, even in the presence of B.subtilis SSB protein (SSB(Bs)). PriA(Bs) also binds stably and specifically to an artificial D-loop structure in vitro. These data show that PriA(Bs) recognises two specific substrates, ssiA and D-loops, and suggest that it triggers primosome assembly on them. PriA(Bs) also displays a single-stranded DNA-dependent ATPase activity, which is reduced in the presence of SSB(Bs), unless the ssiA sequence is present on the ssDNA substrate. Finally, PriA(Bs) is shown to be an active helicase. Altogether, these results demonstrate a clear functional identity between PriA(Ec) and PriA(Bs). However, PriA(Bs) does not complement an E.coli priA null mutant strain. This host specificity may be due to the divergence between the proteins composing the E.coli and B.subtilis PriA-dependent primosomes.

Complete nucleotide sequence of a Staphylococcus aureus exfoliative toxin B plasmid and identification of a novel ADP-ribosyltransferase, EDIN-C

The complete nucleotide sequence of pETB, a 38.2-kb Staphylococcus aureus plasmid encoding the exfoliative toxin B (ETB), was determined. A total of 50 open reading frames were identified on the plasmid genome and, among these, 32 showed sequence similarity to known proteins. pETB contains three copies of IS257, which divide the pETB genome into three regions: (i) a cadmium resistance operon-containing region, (ii) a lantibiotic production gene-containing region, and (iii) the remaining part where genes for plasmid replication and/or maintenance are dispersed. In the third region, genes of various kinds of functions are present among the replication- and maintenance-related genes. They include two virulence-related genes, the etb gene and a gene encoding a novel ADP-ribosyltransferase closely related to EDIN, which belongs to the C3 family of ADP-ribosyltransferases modifying Rho GTPases. They also include genes for a cell wall-anchoring surface protein and a phage resistance protein. Based on the determined sequence of pETB, the genome structures of etb-bearing plasmids (ETB plasmids) from various clinical isolates were analyzed by the PCR scanning method. The data indicate that, although the ETB plasmids are highly heterogeneous in genome size, the fundamental genome organization is well conserved. The size variation of the plasmid is mainly attributed to defined regions which may be hot spots for gene shuffling.

DnaB, DnaD and DnaI proteins are components of the Bacillus subtilis replication restart primosome

Phenotypes of Bacillus subtilis priA mutants suggest that they are deficient in the restart of stalled chromosomal replication forks. The presumed activity of PriA in the restart process is to promote the assembly of a multiprotein complex, the primosome, which functions to recruit the replication fork helicase onto the DNA. We have proposed previously that three proteins involved in the initiation of replication at oriC in B. subtilis, DnaB, DnaD and DnaI, are components of the PriA primosome in this bacterium. However, the involvement of these proteins in replication restart has not yet been studied. Here, we describe dnaB mutations that suppress the phenotypes of B. subtilis priA mutants. In a representative mutant, the DnaC helicase is loaded onto single-stranded DNA in a PriA-independent, DnaD- and DnaI-dependent manner. These observations confirm that DnaB, DnaD and DnaI are primosomal proteins in B. subtilis. Moreover, their involvement in the suppression of priA phenotypes shows that they participate in replication fork restart in B. subtilis.

Endogenous isolation of replicon probes for assessing plasmid ecology of marine sediment microbial communities

Six functional replication origins (repGA14, repGA33, repGA70, repSD41, repSD164 and repSD172), obtained from endogenously isolated, broad-host-range (BHR) marine plasmids ranging in size from 5 to 60 kb, were used to determine plasmid occurrence in three coastal marine sediment sites (in California, Georgia and South Carolina, USA). The plasmid-specific replicons were isolated from plasmid-bearing marine sediment bacteria belonging to the alpha and gamma subclasses of the Proteobacteria. The plasmid sources of the endogenous replicons were considered to be cryptic due to a lack of identifiable phenotypic traits. The putative Rep proteins from a number of these replicons showed similarity to replicons of two recognized families: RCR group III (repSD164) and the FIA family of theta group A (repSD41, repSD121, repGA33 and repGA14). Plasmids isolated from marine bacteria belonging to the genera Pseudoalteromonas, Shewanella and Vibrio cultivated from geographically different coastal sites exhibited homology to two of the marine plasmid replicons, repSD41 and repGA70, obtained from a Vibrio sp. The repGA33 plasmid origin, obtained from a Shewanella sp. isolated from coastal Georgia, was detected in 7% of the Georgia marine sediment Shewanella sp. isolates. Microbial community DNA extracted from marine sediments was also screened for the presence of the plasmid replication sequences. Community DNA samples amplified by PCR yielded a positive signal for the repSD172 and repGA14 replication sequences. The replication origin of BHR plasmid RK2 (IncP) was also detected in marine Vibrio sp. and microbial community DNA extracted from the three coastal sites. These findings provide molecular evidence that marine sediment bacteria harbour an untapped population of BHR plasmids.

The RepE initiator is a double-stranded and single-stranded DNA-binding protein that forms an atypical open complex at the onset of replication of plasmid pAMbeta 1 from Gram-positive bacteria

The RepE protein of the broad host range pAMbeta1 plasmid from Gram-positive bacteria is absolutely required for replication. To elucidate its role, we purified the protein to near homogeneity and analyzed its interactions with different nucleic acids using gel retardation assays and footprinting experiments. We show that RepE is monomeric in solution and binds specifically, rapidly, and durably to the origin at a unique double-stranded binding site immediately upstream from the initiation site of DNA replication. The binding induces only a weak bend (31 degrees ). Unexpectedly, RepE also binds nonspecifically to single-stranded DNA with a 2-4-fold greater affinity than for double-stranded origin. On a supercoiled plasmid, RepE binding to the double-stranded origin leads to the denaturation of the AT-rich sequence immediately downstream from the binding site to form an open complex. This open complex is atypical since (i) its formation requires neither multiple RepE binding sites on the double-stranded origin nor strong bending of the origin, (ii) it occurs in the absence of any cofactors (only RepE and supercoiling are required), and (iii) its melted region serves as a substrate for RepE binding. These original properties together with the fact that pAMbeta1 replication depends on a transcription step through the origin on DNA polymerase I to initiate replication and on a primosome to load the replisome suggest that the main function of RepE is to assist primer generation at the origin.

Replication mutations differentially enhance RecA-dependent and RecA-independent recombination between tandem repeats in Bacillus subtilis

We have studied DNA recombination between 513 bp tandem direct repeats present in a kanamycin resistance gene inserted in the Bacillus subtilis chromosome. Tandem repeat deletion was not significantly affected by a recA mutation. However, recombination was stimulated by mutations in genes encoding replication proteins, including the primosomal proteins DnaB, DnaD and the DnaG primase, the putative DNA polymerase III subunits PolC, DnaN and DnaX, as well as the DNA polymerase DnaE. Hyper-recombination was found to be dependent on RecA in the dnaE, dnaN and dnaX mutants, whereas the dnaG and dnaD mutants stimulated recombination independently of RecA. Altogether, these data show that both RecA-dependent and RecA-independent mechanisms contribute to recombination between tandem repeats in B. subtilis and that both types of recombination are stimulated by replication mutations.

Analysis of the replicon region and identification of an rRNA operon on pBM400 of Bacillus megaterium QM B1551

An 18 633 bp region containing the replicon from the approximately 53 kb pBM400 plasmid of Bacillus megaterium QM B1551 has been sequenced and characterized. This region contained a complete rRNA operon plus 10 other potential open reading frames (ORFs). The replicon consisted of an upstream promoter and three contiguous genes (repM400, orfB and orfC) that could encode putative proteins of 428, 251 and 289 amino acids respectively. A 1.6 kb minimal replicon was defined and contained most of repM400. OrfB was shown to be required for stability. Three 12 bp identical tandem repeats were located within the coding region of repM400, and their presence on another plasmid caused incompatibility with their own cognate replicon. Nonsense, frameshift and deletion mutations in repM400 prevented replication, but each mutation could be complemented in trans. RepM400 had no significant similarity to sequences in the GenBank database, whereas five other ORFs had some similarity to gene products from other plasmids and the Bacillus genome. An rRNA operon was located upstream of the replication region and is the first rRNA operon to be sequenced from B. megaterium. Its unusual location on non-essential plasmid DNA has implications for systematics and evolutionary biology.

Gene transfer to Clostridium cellulolyticum ATCC 35319

Although much is known about the bacterial cellulosome and its various protein components, their contributions to bacterial growth on cellulose and the process of cellulolysis in vivo cannot currently be assessed. To remedy this, the authors have developed gene transfer techniques for Clostridium cellulolyticum ATCC 35319. Firstly, transfer of Tn1545 has been obtained using an Enterococcus faecalis donor. Secondly, IncP-mediated conjugative mobilization of plasmids from Escherichia coli donors has also been achieved. The yield of transconjugants in both cases was low and was probably limited by the suboptimal growth conditions that must of necessity be employed for the co-culture of oligotrophic C. cellulolyticum with copiotrophic donors. A restriction endonuclease was detected in crude extracts of C. cellulolyticum. This enzyme, named CCE:I, is an isoschizomer of MSP:I (HPA:II). Electro-transformation was employed to establish plasmids containing the replication functions of pAMss1 (En. faecalis), pIM13 (Bacillus subtilis), pCB102 (Clostridium butyricum), pIP404 (Clostridium perfringens) and pWV01 (Lactococcus lactis subsp. cremoris) in C. cellulolyticum. Transformants were only obtained if the DNA was appropriately methylated on the external C of the sequence 5'-CCGG-3' using either BSU:FI methylase in vivo or MSP:I methylase in vitro. Plasmids based on the pAMss1 and pIM13 replicons were more stably maintained than one based on the pCB102 replicon. Selection of transformants on solid medium led to low apparent transformation efficiencies (approx. 10(2) transformants per microg DNA) which might, in part, reflect the low plating efficiency of the organism. Selection of transformants in liquid medium led to a higher apparent yield of transformants (between 10(5) and 10(7) transformants per microg DNA). The methods developed here will pave the way for functional analysis of the various cellulosome components in vivo.

Expression of bacillar glutamyl endopeptidase genes in Bacillus subtilis by a new mobilizable single-replicon vector pLF

The pLF1311 natural plasmid from Lactobacillus fermentum 1311 was used to construct a single-replicon vector suitable for rapid cloning in a wide range of gram-positive hosts and Escherichia coli. The new vector is capable of conjugative mobilization from E. coli to various hosts by conjugal transfer. The final vector (3.4 kb) showed a high segregational and structural stability and a high copy number. Glutamyl endopeptidase genes from Bacillus licheniformis (gseBL) and B. intermedius (gseBI) were cloned in both pLF9 and pLF14 vectors and introduced to B. subtilis. The yield of enzymes in the pLF-derived producers was 6- to 30-fold more than in the natural producers and reached 100-150 mg/L of mature protease.

A study of the CopF repressor of plasmid pAMbeta1 by phage display

We studied DNA binding of a transcriptional repressor, CopF, displayed on a filamentous phage. Mutagenesis of a putative helix-turn-helix motif of CopF and of certain bases of the operator abolished the protein-DNA interaction, establishing the elements involved in CopF function and showing that phage display can be used to study repressor proteins.

Identification and characterization of an active plasmid partition mechanism for the novel Lactococcus lactis plasmid pCI2000

The replication region of the lactococcal plasmid pCI2000 was subcloned and analyzed. The nucleotide sequence of one 5.6-kb EcoRI fragment which was capable of supporting replication when cloned on a replication probe vector revealed the presence of seven putative open reading frames (ORFs). One ORF exhibited significant homology to several replication proteins from plasmids considered to replicate via a theta mode. Deletion analysis showed that this ORF, designated repA, is indeed required for replication. The results also suggest that the origin of replication is located outside repA. Upstream and divergently transcribed from repA, an ORF that showed significant (48 to 64%) homology to a number of proteins that are required for faithful segregation of chromosomal or plasmid DNA of gram-negative bacteria was identified. Gene interruption and transcomplementation experiments showed that this ORF, designated parA, is required for stable inheritance of pCI2000 and is active in trans. This is the first example of such a partitioning mechanism for plasmids in gram-positive bacteria.

Sequence and organization of pXO1, the large Bacillus anthracis plasmid harboring the anthrax toxin genes

The Bacillus anthracis Sterne plasmid pXO1 was sequenced by random, "shotgun" cloning. A circular sequence of 181,654 bp was generated. One hundred forty-three open reading frames (ORFs) were predicted using GeneMark and GeneMark.hmm, comprising only 61% (110,817 bp) of the pXO1 DNA sequence. The overall guanine-plus-cytosine content of the plasmid is 32.5%. The most recognizable feature of the plasmid is a "pathogenicity island," defined by a 44.8-kb region that is bordered by inverted IS1627 elements at each end. This region contains the three toxin genes (cya, lef, and pagA), regulatory elements controlling the toxin genes, three germination response genes, and 19 additional ORFs. Nearly 70% of the ORFs on pXO1 do not have significant similarity to sequences available in open databases. Absent from the pXO1 sequence are homologs to genes that are typically required to drive theta replication and to maintain stability of large plasmids in Bacillus spp. Among the ORFs with a high degree of similarity to known sequences are a collection of putative transposases, resolvases, and integrases, suggesting an evolution involving lateral movement of DNA among species. Among the remaining ORFs, there are three sequences that may encode enzymes responsible for the synthesis of a polysaccharide capsule usually associated with serotype-specific virulent streptococci.

Molecular characterisation of a 5.75-kb cryptic plasmid from Bifidobacterium breve NCFB 2258 and determination of mode of replication

A small cryptic plasmid originating from Bifidobacterium breve NCFB 2258 was cloned and its complete nucleotide sequence determined. pCIBb1 is a circular DNA molecule, 5750 bp in size with a GC composition of 57%. Computer-assisted analysis identified 10 possible open reading frames (ORFs), seven of which could be assigned no function from homology searches. One ORF, rep (380 amino acids), was postulated to encode a replication protein similar to known replication proteins of rolling circle replicons, particularly those of the pC194 family. Demonstration of single-stranded forms of the plasmid in cell lysates that could be specifically degraded by S1 nuclease provided experimental evidence to substantiate a replication mechanism via single-stranded intermediates. Two other ORFs, par (199 amino acids) and an ftsK-like gene (286 amino acids), were assigned putative functions based on the presence of conserved motifs in their deduced proteins.

Replication mechanism and sequence analysis of the replicon of pAW63, a conjugative plasmid from Bacillus thuringiensis

A 5.8-kb fragment of the large conjugative plasmid pAW63 from Bacillus thuringiensis subsp. kurstaki HD73 containing all the information for autonomous replication was cloned and sequenced. By deletion analysis, the pAW63 replicon was reduced to a 4.1-kb fragment harboring four open reading frames (ORFs). Rep63A (513 amino acids [aa]), encoded by the largest ORF, displayed strong similarity (40% identity) to the replication proteins from plasmids pAMbeta1, pIP501, and pSM19035, indicating that the pAW63 replicon belongs to the pAMbeta1 family of gram-positive theta-replicating plasmids. This was confirmed by the facts that no single-stranded DNA replication intermediates could be detected and that replication was found to be dependent on host-gene-encoded DNA polymerase I. An 85-bp region downstream of Rep63A was also shown to have strong similarity to the origins of replication of pAMbeta1 and pIP501, and it is suggested that this region contains the bona fide pAW63 ori. The protein encoded by the second large ORF, Rep63B (308 aa), was shown to display similarity to RepB (34% identity over 281 aa) and PrgP (32% identity over 310 aa), involved in copy control of the Enterococcus faecalis plasmids pAD1 and pCF10, respectively. No significant similarity to known proteins or DNA sequences could be detected for the two smallest ORFs. However, the location, size, hydrophilicity, and orientation of ORF6 (107 codons) were analogous to those features of the putative genes repC and prgO, which encode stability functions on plasmids pAD1 and pCF10, respectively. The cloned replicon of plasmid pAW63 was stably maintained in Bacillus subtilis and B. thuringiensis and displayed incompatibility with the native pAW63. Hybridization experiments using the cloned replicon as a probe showed that pAW63 has similarity to large plasmids from other B. thuringiensis subsp. kurstaki strains and to a strain of B. thuringiensis subsp. alesti.

Isolation of a derivative of Escherichia coli-Enterococcus faecalis shuttle vector pAM401 temperature sensitive for maintenance in E. faecalis and its use in evaluating the mechanism of pAD1 par-dependent plasmid stabilization

A derivative of the Escherichia coli-Enterococcus faecalis shuttle vector pAM401 was isolated by mutagenesis in an E. coli mutator strain. This plasmid, designated pAM401ts, was more than an order of magnitude less stable at 38 degreesC than at 30 degreesC in the E. faecalis host strain JH2-2. The E. faecalis plasmid pAD1-encoded par stability locus was cloned onto pAM401ts, and its effects on plasmid stability and host cell viability were assessed. It was found that par stabilized pAM401ts at 38 degreesC but also caused a substantial drop in cell viability three to four generations after a temperature shift from 30 to 38 degreesC. After a maximum viability drop of 94%, culture growth recovered as plasmid-free cells began to accumulate. Provision of excess RNAII, the putative par antidote, in trans attenuated cell killing. These characteristics support a postsegregational killing mechanism for par-mediated plasmid stabilization.

Characterization of a theta plasmid replicon with homology to all four large plasmids of Bacillus megaterium QM B1551

A replicon from one of an array of seven indigenous compatible plasmids of Bacillus megaterium QM B1551 has been cloned and sequenced. The replicon hybridized with all four of the large plasmids (165, 108, 71, and 47 kb) of strain QM B1551. The cloned 2374-bp HindIII fragment was sequenced and contained two upstream palindromes and a large (>419-amino-acid) open reading frame (ORF) truncated at the 3' end. Unlike most plasmid origins, a region of four tandem 12-bp direct repeats was located within the ORF. The direct repeats alone were incompatible with the replicon, suggesting that they are iterons and that the plasmid probably replicates by theta replication. The ORF product was shown to act in trans. A small region with similarity to the B. subtilis chromosomal origin membrane binding region was detected as were possible binding sites for DnaA and IHF proteins. Deletion analysis showed the minimal replicon to be a 1675-bp fragment containing the incomplete ORF plus 536 bp upstream. The predicted ORF protein of >48 kDa was basic and rich in glutamate + glutamine (16%). There was no significant amino acid similarity to any gene, nor were there any obvious motifs present in the ORF. The data suggest that this is a theta replicon with an expressed rep gene required for replication. The replicon contains its iterons within the gene and has no homology to reported replicons. It is the first characterization of a B. megaterium replicon.

Transcription-driven DNA replication of plasmid pAMbeta1 in Bacillus subtilis

pAMbeta1 is a plasmid isolated from Enterococcus faecalis which replicates in Bacillus subtilis by a unidirectional theta mechanism. It has been shown previously that initiation of pAMbeta1 replication requires a plasmid-encoded protein (RepE) and a short origin and is carried out by the host DNA polymerase I. It is not known which primer is used by this polymerase for initiating replication. Here, we report that a transcription fork passing through the origin is a limiting factor for plasmid replication. Transcription that activates the origin is initiated at the repE promoter and is thus regulated by the plasmid copy-number control system. Two lines of evidence suggest that the transcription generates the primer for the DNA polymerase I. First, the transcription must start upstream from the origin and progress in the direction of replication to be effective. Second, 3' ends of RNA transcripts initiated upstream of the origin map within the origin, provided that the Rep protein and an intact origin are present. This is the first report for simultaneous requirement of a transcription fork, a replication protein and the DNA polymerase I in initiation of DNA replication.

Inhibition of a naturally occurring rolling-circle replicon in derivatives of the theta-replicating plasmid pIP501

The mechanisms ensuring regulation of DNA replication in genomes containing multiple replicons are poorly understood. In this report, we addressed this question by analysing in Bacillus subtilis the replication of a derivative of the promiscuous plasmid pIP501 that carries a rolling-circle and a theta replicon. Genetic analyses revealed that the rolling-circle replicon is strongly inhibited in the derivative and that inhibition requires three elements involved in theta replication: the replication origin, the initiator RepR protein and strong transcription of the repR gene. Inhibition is, however, independent of DNA synthesis at the theta origin. We conclude that rolling-circle inhibition is caused by an inhibitory signal encoded by the theta replicon and propose that the signal is composed, at least, of the RepR protein bound to its cognate origin.

In vivo relations between pAMbeta1-encoded type I topoisomerase and plasmid replication

A number of large extrachromosomal elements encode prokaryotic type I topoisomerases of unknown functions. Here, we analysed the topoisomerase Topbeta encoded by the Gram-positive broad-host-range plasmid pAMbeta1. We show that this enzyme possesses the DNA relaxation activity of type I topoisomerases. Interestingly, it is active only on plasmids that use DNA polymerase I to initiate replication, such as pAMbeta1, and depends on the activity of this polymerase. This is the first example, to our knowledge, of prokaryotic type I topoisomerase that is specific for a given type of replicon. During pAMbeta1 replication in Bacillus subtilis cells, Topbeta promotes premature arrest of DNA polymerase I, approximately 190bp downstream of the replication initiation point. We propose that Topbeta acts on the early replication intermediates of pAMbeta1, which contain D-loops formed by DNA polymerase I-mediated strand displacement. The possible role of the resulting DNA Pol I arrest in plasmid replication is discussed.

Replication and control of circular bacterial plasmids

An essential feature of bacterial plasmids is their ability to replicate as autonomous genetic elements in a controlled way within the host. Therefore, they can be used to explore the mechanisms involved in DNA replication and to analyze the different strategies that couple DNA replication to other critical events in the cell cycle. In this review, we focus on replication and its control in circular plasmids. Plasmid replication can be conveniently divided into three stages: initiation, elongation, and termination. The inability of DNA polymerases to initiate de novo replication makes necessary the independent generation of a primer. This is solved, in circular plasmids, by two main strategies: (i) opening of the strands followed by RNA priming (theta and strand displacement replication) or (ii) cleavage of one of the DNA strands to generate a 3'-OH end (rolling-circle replication). Initiation is catalyzed most frequently by one or a few plasmid-encoded initiation proteins that recognize plasmid-specific DNA sequences and determine the point from which replication starts (the origin of replication). In some cases, these proteins also participate directly in the generation of the primer. These initiators can also play the role of pilot proteins that guide the assembly of the host replisome at the plasmid origin. Elongation of plasmid replication is carried out basically by DNA polymerase III holoenzyme (and, in some cases, by DNA polymerase I at an early stage), with the participation of other host proteins that form the replisome. Termination of replication has specific requirements and implications for reinitiation, studies of which have started. The initiation stage plays an additional role: it is the stage at which mechanisms controlling replication operate. The objective of this control is to maintain a fixed concentration of plasmid molecules in a growing bacterial population (duplication of the plasmid pool paced with duplication of the bacterial population). The molecules involved directly in this control can be (i) RNA (antisense RNA), (ii) DNA sequences (iterons), or (iii) antisense RNA and proteins acting in concert. The control elements maintain an average frequency of one plasmid replication per plasmid copy per cell cycle and can "sense" and correct deviations from this average. Most of the current knowledge on plasmid replication and its control is based on the results of analyses performed with pure cultures under steady-state growth conditions. This knowledge sets important parameters needed to understand the maintenance of these genetic elements in mixed populations and under environmental conditions.

A novel Bacillus natto plasmid pLS32 capable of replication in Bacillus subtilis

Plasmid pLS32 is a relatively large (approximately 70 kbp), cryptic, low copy-number plasmid present in Bacillus natto. We isolated and analyzed the replication region of the plasmid in B. subtilis, and the following results were obtained: the replication region contained an open reading frame encoding a 287-amino acid protein (RepN), whose amino acid sequence was partially homologous with those of the Rep proteins encoded on plasmids pAD1 and pLJ1 isolated from Enterococcus faecalis and Lactobacillus helveticus, respectively; the replication origin (oriN) was located in the repN-coding region; the copy number of a pLS32 derivative, pBET131, was 2 to 3 per chromosome; replication of pBET131 required poll. These features show that pLS32 is a novel plasmid capable of replication in B. subtilis.

Enterococcal transposon Tn5384: evolution of a composite transposon through cointegration of enterococcal and staphylococcal plasmids

Mechanisms for the possible transfer of antimicrobial resistance genes between staphylococci and enterococci remain poorly defined. We have previously reported the transfer between Enterococcus faecalis strains of a multiresistance chromosomal element (beta-lactamase positive and resistance to erythromycin, gentamicin, mercuric chloride, streptomycin, and tetracycline) which we have tentatively designated Tn5385. Tn5385 is a composite of several smaller transposable elements, including Tn5384, a 26-kb composite transposon conferring resistance to erythromycin, gentamicin, and mercuric chloride. Analyses of 7 kb within Tn5384 and flanking sequences within the larger element revealed sequences characteristic of staphylococcal beta-lactamase and small, mobilizable plasmids flanking a region with a sequence identical to those of the replication genes previously described for enterococcal and streptococcal broad-host-range plasmids. These diverse regions are linked by insertion sequences IS256 and IS257 in a manner which suggests a series of cointegration events as the genesis of the current relationship. Taken together, these data suggest that Tn5384 and the larger element within which it is incorporated (Tn5385) evolved at least in part as a result of cointegration between an enterococcal broad-host-range plasmid and staphylococcal beta-lactamase and small mobilizable plasmids. These results implicate broad-host-range plasmids in the transfer of resistance determinants from staphylococci to enterococci.

The RLEP-flanked polA gene from Mycobacterium leprae is not transcribed in Mycobacterium smegmatis

A polA mutant of Mycobacterium smegmatis (Ms) lacking DNA polymerase activity could not support the replication of a pAL5000-derived plasmid or a derivative harbouring the RLEP-flanked polA gene from M. leprae (Mlep). In contrast, the plasmid containing the M. tuberculosis polA gene transformed the mutant with high efficiency and complemented its damage-sensitive phenotype suggesting that the replication of the pAL5000 origin is dependent on host PolI function and that the RLEP-flanked Mlep polA gene is not expressed in Ms.

Apparent and real recombination frequencies in multicopy plasmids: the need for a novel approach in frequency determination

Recombination studies of bacteria are often carried out with multicopy plasmids, and recombination frequencies are often deduced from the proportion of cells in the population that express a recombinant phenotype. These frequencies should however be called apparent frequencies, since detection of the recombinant cells requires not only the formation of a rearranged plasmid but also its establishment in the cell. The establishment of the recombinant plasmid can possibly be affected by its interaction with the parental plasmids. To test this hypothesis, we have used a plasmid system enabling the study of deletion formation between short direct repeats (18 bp) in Bacillus subtilis and developed a method by which deletion frequencies are measured under conditions under which interaction is abolished. Real deletion frequencies were thus determined and compared with apparent deletion frequencies. Real frequencies were underestimated by a factor ranging from 4- to 500-fold, depending upon the plasmid under study. This implies that a large majority of the recombinant molecules that are formed are generally not detected. We show that apparent deletion frequencies strongly depend upon (i) the parental plasmid copy number, (ii) the ability of the recombinant molecules to form heterodimeric plasmids, and (iii) the fitness of the recombinant molecules relative to that of parental molecules. Finally, we show that under conditions under which all recombinant molecules are scored, transcription can inhibit the deletion process 10-fold.

Cryptic plasmid pKA22 isolated from the naphthalene degrading derivative of Rhodococcus rhodochrous NCIMB13064

Cryptic plasmids were found in Rhodococcus rhodochrous NCIMB13064 derivatives which had lost the ability to utilize short-chain 1-chloroalkanes (chain length C3-C10) and had acquired the ability to degrade naphthalene. The reversions of these derivatives to the original phenotype were accompanied by the loss of the cryptic plasmids. The 4969-bp pKA22 plasmid was cloned in Escherichia coli and sequenced. This plasmid encodes a putative 33,200-Da protein which contains motifs typical of theta replicase proteins and shows a high degree of similarity to a putative theta replicase from Brevibacterium linens plasmid pRBL1 and to a putative protein encoded by ORF1 of the plasmid pAL5000 from Mycobacterium fortuitum. Two sets of long direct repeats were found in pKA22 which may be involved in the replication of the plasmid and recombination processes.

In vivo analysis of the plasmid pAM beta 1 resolution system

The promiscuous plasmid pAM beta 1 from Gram-positive bacteria encodes a resolution system which differs from that of Tn3 in that (i) it requires a histone-like protein and an unusual resolvase-DNA interaction to promote recombination and (ii) it mediates in vivo DNA inversion in plasmid substrates. In this in vivo analysis, the pAM beta 1 resolution site is narrowed down to a 99 bp segment, the strand exchange is mapped within 10 bp and the serine residue at position 10 of the resolvase is shown to be essential for enzyme activity. In addition, data showing that the resolution system does not promote DNA inversion in the Bacillus subtilis chromosome are presented. Implications of this observation are discussed.

Countertranscript-driven attenuation system of the pAM beta 1 repE gene

The plasmid-encoded RepE protein is absolutely essential and rate-limiting for replication of the promiscuous plasmid pAM beta 1 originating from Enterococcus faecalis. We previously showed that the rep gene is transcribed from a promoter that is negatively regulated (approximately 10-fold reduction) by the CopF repressor. In this report, we show that this transcription is decreased a further approximately 10-times by a countertranscript-driven transcriptional attenuation system. Extensive mutagenesis revealed that this system operates by a mechanism similar to that previously described for the unrelated repC gene of plasmid pT181.

Characterization of the replication region of the Bacillus subtilis plasmid pLS20: a novel type of replicon

A 3.1 kb fragment of the large (approximately 55 kb) Bacillus subtilis plasmid pLS20 containing all the information for autonomous replication was cloned and sequenced. In contrast to the parental plasmid, derived minireplicons were unstably maintained. Using deletion analysis the fragment essential and sufficient for replication was delineated to 1.1 kb. This 1.1 kb fragment is located between two divergently transcribed genes, denoted orfA and orfB, neither of which is required for replication. orfA shows homology to the B.subtilis chromosomal genes rapA (spoOL, gsiA) and rapB (spoOP). The 1.1 kb fragment, which is characterized by the presence of several regions of dyad symmetry, contains no open reading frames of more than 85 codons and shows no similarity with other known plasmid replicons. The structural organization of the pLS20 minimal replicon is entirely different from that of typical rolling circle plasmids from Gram-positive bacteria. The pLS20 minireplicons replicate in polA5 and recA4 B.subtilis strains. Taken together, these results strongly suggest that pLS20 belongs to a new class of theta replicons.

The pAM beta 1 CopF repressor regulates plasmid copy number by controlling transcription of the repE gene

pAM beta 1 is a low-copy-number, promiscuous plasmid from Gram-positive bacteria that replicates by a unidirectional theta-type mode. Its replication is initiated by an original mechanism, involving the positive rate-limiting RepE protein. Here we show that the pAM beta 1-encoded CopF protein is involved in negative regulation of the plasmid copy number. CopF represses approximately 10-fold the transcription initiated at the promoter of the repE gene and binds to a 31 bp segment which is located immediately upstream of the -35 box of the repE promoter. We propose that CopF inhibits initiation of transcription at the repE promoter by binding to its operator.