Modification of plant proteins for improved functionality: A review

Effects of Heat Treatment on the Structural and Functional Properties of Phaseolus vulgaris L. Protein

The paper presents the effect of heat treatment at 80 °C at different times (3, 5, 7, and 9 min) on the structural and functional properties of Phaseolus vulgaris L. protein (PVP, bean protein powder). Surface and structure properties of PVP after heat treatment were analyzed using a Fourier transform infrared spectrometer (FTIR), a fluorescence spectrophotometer, a visible light spectrophotometer, a laser particle size analyzer, and other equipment. The secondary structure and surface hydrophobicity (H0) of PVP changed significantly after heat treatment: the β-sheet content decreased from 25.32 ± 0.09% to 24.66 ± 0.09%, the random coil content increased from 23.91 ± 0.11% to 25.68 ± 0.08%, and the H0 rose by 28.96-64.99%. In addition, the functional properties of PVP after heat treatment were analyzed. After heat treatment, the emulsifying activity index (EAI) of PVP increased from 78.52 ± 2.01 m2/g to 98.21 ± 1.33 m2/g, the foaming ability (FA) improved from 87.31 ± 2.56% to 95.82 ± 2.96%, and the foam stability (FS) rose from 53.23 ± 1.72% to 58.71 ± 2.18%. Finally, the degree of hydrolysis (DH) of PVP after gastrointestinal simulated digestion in vitro was detected by the Ortho-Phthal (OPA) method. Heat treatment enhanced the DH of PVP from 62.34 ± 0.31% to 73.64 ± 0.53%. It was confirmed that heat treatment changed the structural properties of PVP and improved its foamability, emulsification, and digestibility. It provides ideas for improving PVP's potential and producing new foods with rich nutrition, multiple functions, and easy absorption.

Technological advances in protein extraction, structure improvement and assembly, digestibility and bioavailability of plant-based foods

Plant-based foods are being considered seriously to replace traditional animal-origin foods for various reasons. It is well known that animals release large amounts of greenhouse gases into the environment during feeding, and eating animal-origin foods may also cause some health problems. Moreover, animal resources will likely be in short supply as the world population grows. It is highly likely that serious health problems ascribed to insufficient protein intake in some areas of the world will occur. Studies have shown that environmentally friendly, abundant, and customizable plant-based foods can be an effective alternative to animal-based foods. However, currently, available plant-based foods lack nutrients unique to animal-based foods. Innovative processing technologies are needed to improve the nutritional value and functionality of plant-based foods and make them acceptable to a wider range of consumers. Therefore, protein extraction technologies (e.g., high-pressure extraction, ultrasound extraction, enzyme extraction, etc.), structure improvement and assembly technologies (3D printing, micro-encapsulation, etc.), and technologies to improve digestibility and utilization of bioactive substances (microbial fermentation, physical, etc.) in the field of plant-based foods processing are reviewed. The challenges of plant-based food processing technologies are summarized. The advanced technologies aim to help the food industry solve production problems using efficient, environmentally friendly, and economical processing technologies and to guide the development of plant-based foods in the future.

Nordic Crops as Alternatives to Soy-An Overview of Nutritional, Sensory, and Functional Properties

Soy (Glycine max) is used in a wide range of products and plays a major role in replacing animal-based products. Since the cultivation of soy is limited by cold climates, this review assessed the nutritional, sensory, and functional properties of three alternative cold-tolerant crops (faba bean (Vicia faba), yellow pea (Pisum sativum), and oat (Avena sativa)). Lower protein quality compared with soy and the presence of anti-nutrients are nutritional problems with all three crops, but different methods to adjust for these problems are available. Off-flavors in all pulses, including soy, and in cereals impair the sensory properties of the resulting food products, and few mitigation methods are successful. The functional properties of faba bean, pea, and oat are comparable to those of soy, which makes them usable for 3D printing, gelation, emulsification, and extrusion. Enzymatic treatment, fermentation, and fibrillation can be applied to improve the nutritional value, sensory attributes, and functional properties of all the three crops assessed, making them suitable for replacing soy in a broad range of products, although more research is needed on all attributes.

Walnut Protein: A Rising Source of High-Quality Protein and Its Updated Comprehensive Review

Recently, plant protein as a necessary nutrient source for human beings, a common ingredient of traditional processed food, and an important element of new functional food has gained prominence due to the increasing demand for healthy food. Walnut protein (WP) is obtained from walnut kernels and walnut oil-pressing waste and has better nutritional, functional, and essential amino acids in comparison with other vegetable and grain proteins. WP can be conveniently obtained by various extraction techniques, including alkali-soluble acid precipitation, salting-out, and ultrasonic-assisted extraction, among others. The functional properties of WP can be modified for desired purposes by using some novel methods, including free radical oxidation, enzymatic modification, high hydrostatic pressure, etc. Moreover, walnut peptides play an important biological role both in vitro and in vivo. The main activities of the walnut peptides are antihypertensive, antioxidant, learning improvement, and anticancer, among others. Furthermore, WP could be applied in the development of functional foods or dietary supplements, such as delivery systems and food additives, among others. This review summarizes recent knowledge on the nutritional, functional, and bioactive peptide aspects of WP and possible future products, providing a theoretical reference for the utilization and development of oil crop waste.

A study on the use of sorrel seed flour (Hibiscus sabdariffa) for improving functionality of wheat flour bread

Bread presents one of the easiest opportunities as a food vehicle for delivery of nutritional and health-promoting benefits to large segments of the world population. However, its low nutritional status due to lack of balance of essential amino acids and inadequate macro- and micronutrients has necessitated recent interest in the development of high-protein hybrid breads (HPHB). Sorrel seed, an underutilized, neglected protein-rich seed holds promising nutritional and antioxidant potentials as source of good quality protein, dietary fibre and bioactive compounds. Furthermore, germination of plant seeds increases the bioavailability of these nutritional and bioactive compounds. Hence, this study has investigated the influence of germination time on nutritional, and functional properties of sorrel seed flour. Further, the amino acid profile, dietary fibre and rheological functionality of wheat-germinated defatted sorrel seed bread were assessed. The sorrel seed was germinated for 24-48 h and defatted. Thereafter, the germinated defatted sorrel seed flours were used to partially replace wheat flour using a linear replacement (w/w) of 95-80% wheat (W) and 5-20% germinated defatted sorrel seed (GS) flours to obtain W95:GS5; W90:GS10, W85:GS15 and W80:GS20. These composite flours and 100% wheat flour (control) were used to produce breads using standard recipe and methods. Results showed significant increase (P < 0.05) in crude protein, dietary fibre and mineral contents after 24 and 48 h germination of sorrel seed. While 24 h germination significantly (P < 0.05) increased WAC from 93.75% to 103.13%, further germination (48 h) caused a reduction of 26.67% (from 93.75 to 68.75%). In vitro protein digestibility of wheat flour decreased significantly (P < 0.05) as supplementation of germinated defatted sorrel seed flour increased. Supplementation of wheat flour with germinated defatted sorrel seed flour in bread production resulted in 51.84-121.42% significant (p < 0.05) increase in the protein content of wheat bread. Similarly, total essential amino acids, dietary fibre, mineral, and ash contents followed the same increasing trend. The in-vivo biological value which ranged from 82.10 to 89.40% was significantly higher (p < 0.05) than 58.30% obtained for the control (100% wheat bread) Thus, inclusion of germinated defatted sorrel seed flour in bread production may serve as a low-cost nutritional supplement for enhancing the nutritional profile and functional benefits of wheat bread.

Combination of Milk and Plant Proteins to Develop Novel Food Systems: What Are the Limits?

In the context of a diet transition from animal protein to plant protein, both for sustainable and healthy scopes, innovative plant-based foods are being developing. A combination with milk proteins has been proposed as a strategy to overcome the scarce functional and sensorial properties of plant proteins. Based on this mixture were designed several colloidal systems such as suspensions, gels, emulsions, and foams which can be found in many food products. This review aims to give profound scientific insights on the challenges and opportunities of developing such binary systems which could soon open a new market category in the food industry. The recent trends in the formulation of each colloidal system, as well as their limits and advantages are here considered. Lastly, new approaches to improve the coexistence of both milk and plant proteins and how they affect the sensorial profile of food products are discussed.

The Effects of Omega 3 and Omega 6 Fatty Acids on Glucose Metabolism: An Updated Review

Massive changes have occurred in our diet. A growing consumption of vegetal oils rich in omega-6 (ω-6) and a depletion of omega-3 (ω-3) fatty acids (FAs) in our food has led to an imbalance between ω-3 and ω-6. In particular, eicosapentaenoic (EPA)/arachidonic acid (AA) ratio seems to be an indicator of this derangement, whose reduction is associated to the development of metabolic diseases, such as diabetes mellitus. Our aim was therefore to investigate the literature on the effects of ω-3 and ω-6 FAs on glucose metabolism. We discussed emerging evidence from pre-clinical studies and from clinical trials. Notably, conflicting results emerged. Source of ω-3, sample size, ethnicity, study duration and food cooking method may be responsible for the lack of univocal results. High EPA/AA ratio seems to be a promising indicator of better glycemic control and reduced inflammation. On the other hand, linoleic acid (LA) appears to be also associated to a minor incidence of type 2 diabetes mellitus, although it is still not clear if the outcome is related to a reduced production of AA or to its intrinsic effect. More data derived from multicenter, prospective randomized clinical trials are needed.

Faba Bean Flavor Effects from Processing to Consumer Acceptability

Faba beans as an alternative source of protein have received significant attention from consumers and the food industry. Flavor represents a major driving force that hinders the utilization faba beans in various products due to off-flavor. Off-flavors are produced from degradation of amino acids and unsaturated fatty acids during seed development and post-harvest processing stages (storage, dehulling, thermal treatment, and protein extraction). In this review, we discuss the current state of knowledge on the aroma of faba bean ingredients and various aspects, such as cultivar, processing, and product formulation that influence flavour. Germination, fermentation, and pH modulation were identified as promising methods to improve overall flavor and bitter compounds. The probable pathway in controlling off-flavor evolution during processing has also been discussed to provide efficient strategies to limit their impact and to encourage the use of faba bean ingredients in healthy food design.

Cardinal models to describe the effect of temperature and pH on the growth of Anoxybacillus flavithermus & Bacillus licheniformis

Anoxybacillus flavithermus and Bacillus licheniformis are among the predominant spore-formers of heat-processed foods. To our knowledge, no systematic analysis of growth kinetic data of A. flavithermus or B. licheniformis is currently available. In the present study, the growth kinetics of A. flavithermus and B. licheniformis in broth at various temperature and pH conditions were studied. Cardinal models were used to model the effect of the above-mentioned factors on the growth rates. The estimated values for the cardinal parameters T_min,T_opt,T_max,pH_min and pH_1/2 for A. flavithermus were 28.70 ± 0.26, 61.23 ± 0.16 and 71.52 ± 0.32 °C, 5.52 ± 0.01 and 5.73 ± 0.01, respectively, while for B. licheniformis they were 11.68 ± 0.03, 48.05 ± 0.15, 57.14 ± 0.01 °C, 4.71 ± 0.01 and 5.670 ± 0.08, respectively. The growth behaviour of these spoilers was also investigated in a pea beverage at 62 and 49 °C, respectively, to adjust the models to this product. The adjusted models were further validated at static and dynamic conditions and demonstrated good performance with 85.7 and 97.4% of predicted populations for A. flavithermus and B. licheniformis, respectively, being within the -10%-10% relative error (RE) zone. The developed models can be useful tools in assessing the potential of spoilage of heat-processed foods including plant-based milk alternatives.

Sustainable emerging high-intensity sonication processing to enhance the protein bioactivity and bioavailability: An updated review

High-intensity ultrasound (HIU) is considered one of the promising non-chemical eco-friendly techniques used in food processing. Recently (HIU) is known to enhance food quality, extraction of bioactive compounds and formulation of emulsions. Various foods are treated with ultrasound, including fats, bioactive compounds, and proteins. Regarding proteins, HIU induces acoustic cavitation and bubble formation, causing the unfolding and exposure of hydrophobic regions, resulting in functional, bioactive, and structural enhancement. This review briefly portrays the impact of HIU on the bioavailability and bioactive properties of proteins; the effect of HIU on protein allergenicity and anti-nutritional factors has also been discussed. HIU can enhance bioavailability and bioactive attributes in plants and animal-based proteins, such as antioxidant activity, antimicrobial activity, and peptide release. Moreover, numerous studies revealed that HIU treatment could enhance functional properties, increase the release of short-chain peptides, and decrease allergenicity. HIU could replace the chemical and heat treatments used to enhance protein bioactivity and digestibility; however, its applications are still on research and small scale, and its usage in industries is yet to be implemented.

Effect of High-Intensity Ultrasound Pretreatment on the Properties of the Transglutaminase (TGase)-Induced β-Conglycinin (7S) Gel

In this study, we investigated the effects of different high-intensity ultrasound (HIU) pretreatment times (0-60 min) on the structure of β-conglycinin (7S) and the structural and functional properties of 7S gels induced by transglutaminase (TGase). Analysis of 7S conformation revealed that 30 min HIU pretreatment significantly induced the unfolding of the 7S structure, with the smallest particle size (97.59 nm), the highest surface hydrophobicity (51.42), and the lowering and raising of the content of the α-helix and β-sheet, respectively. Gel solubility showed that HIU facilitated the formation of ε-(γ-glutamyl)lysine isopeptide bonds, which maintain the stability and integrity of the gel network. The SEM revealed that the three-dimensional network structure of the gel at 30 min exhibited filamentous and homogeneous properties. Among them, the gel strength and water-holding capacity were approximately 1.54 and 1.23 times higher than those of the untreated 7S gels, respectively. The 7S gel obtained the highest thermal denaturation temperature (89.39 °C), G', and G″, and the lowest tan δ. Correlation analysis demonstrated that the gel functional properties were negatively correlated with particle size and the α-helix, while positively with Ho and β-sheet. By contrast, gels without sonication or with excessive pretreatment showed a large pore size and inhomogeneous gel network, and poor properties. These results will provide a theoretical basis for the optimization of HIU pretreatment conditions during TGase-induced 7S gel formation, to improve gelling properties.

A mini-review about direct steam heating and its application in dairy and plant protein processing

The world's requirement for plant protein consumption is increasing. However, their application in different foods is limited due to their low techno-functionality. Heating is the most widely used method to improve the functionality of proteins. Compared to indirect tubular or plate heating methods, direct steam injection heating (DSIH) can heat the sample much faster, thus modifying the structure and functionality of protein differently. It is used in the sterilization of milk to minimize the heat-induced denaturation of whey proteins and the loss of volatiles. By contrast, its application in producing plant protein ingredients is seldom. This review summarizes recent research using DSIH to process dairy- and plant-based proteins and proposes future research perspectives. DSIH is a promising technique for producing functional protein ingredients. It is of particular interest to overcome the techno-functional hurdles of plant protein blends using DSIH to improve their behavior in different food matrices.

Plant protein-based emulsions for the delivery of bioactive compounds

Emulsion-based delivery systems (EBDSs) can be used as effective carriers for bioactive compounds (bioactives). Recent studies have shown that plant proteins (PLPs) have the potential to be utilized as stabilizers of emulsions for loading, protection and delivery of bioactives. Different strategies combining physical, chemical and biological techniques can be applied for alteration of the structural characteristics and improving the emulsification and encapsulation performance of PLPs. The stability, release, and bioavailability of the encapsulated bioactives can be tailored via optimizing the processing conditions and formulation of the emulsions. This paper presents cutting-edge information on PLP-based emulsions carrying bioactives in terms of their preparation methods, physicochemical characteristics, stability, encapsulation efficiency and release behavior of bioactives. Strategies applied for improvement of emulsifying and encapsulation properties of PLPs used in EBDSs are also reviewed. Special emphasis is given to the use of PLP-carbohydrate complexes for stabilizing bioactive-loaded emulsions.

Structural Characterization, Technofunctional and Rheological Properties of Sesame Proteins Treated by High-Intensity Ultrasound

Plant-derived proteins, such as those from sesame seeds, have the potential to be used as versatile food ingredients. End-use functionality can be further improved by high-intensity ultrasound treatments. The effects of high-intensity ultrasound on the properties of sesame protein isolates from cold-pressed sesame cake were evaluated. The SDS-PAGE demonstrated no significant changes in the molecular weight of proteins. Ultrasound treatments resulted in decreased particle size with a more uniform distribution, resulting in the exposure of hydrophobicity and free -SH groups and increased zeta potential. Although FTIR spectra of proteins were similar after ultrasonication, a partial increase in the intensity of the amide A band was observed. The ultrasound significantly (p < 0.05) affected the secondary structure of proteins. While optical micrographics revealed a dispersed structure with smaller particles after treatments, microstructural observations indicated more rough and irregular surfaces. Water solubility was improved to 80.73% in the sample subjected to 6 min of ultrasonication. Sesame protein solutions treated for 4 and 6 min exhibited viscoelastic structure (storage modulus (G') > loss modulus (G'')). In addition, the gelation temperature of proteins decreased to about 60-65 °C with increasing treatment time. Overall, ultrasound is a useful technique for the modification of sesame protein isolates.

Alkali-Induced Phenolic Acid Oxidation Enhanced Gelation of Ginkgo Seed Protein

The effect of alkali-induced oxidation of three phenolic acids, namely gallic acid, epigallocatechin gallate, and tannic acid, on the structure and gelation of ginkgo seed protein isolate (GSPI) was investigated. A mixture of 12% (w/v) GSPI and different concentrations of alkali-treated phenolic acids (0, 0.06, 0.24, and 0.48% w/w) were heated at 90 °C, pH 6.0, for 30 min to form composite gels. The phenolic treatment decreased the hydrophobicity of the GSPI sol while enhancing their rheological properties. Despite a reduced protein solubility, water holding capacity, stiffness, and viscoelasticity of the gels were improved by the treatments. Among them, the modification effect of 0.24% (w/v) EGCG was the most prominent. Through the analysis of microstructure and composition, it was found to be due to the covalent addition, disulfide bond formation, etc., between the quinone derivatives of phenolic acids and the side chains of nucleophilic amino acids. Phenolic acid modification of GSPI may be a potential ingredient strategy in its processing.

Developments in Plant Proteins Production for Meat and Fish Analogues

In recent years, there have been significant developments in plant proteins production for meat and fish analogues. Some of the key developments include the use of new plant protein sources such as soy, legumes, grains, potatoes, and seaweed, as well as insect proteins, leaf proteins, mushrooms, and microbial proteins. Furthermore, to improve the technological and functional properties of plant proteins, they can be subjected to traditional and unconventional treatments such as chemical (glycosylation, deamidation, phosphorylation, and acylation), physical (pulsed electric fields, ultrasound, high hydrostatic pressure, dynamic high-pressure treatment, and cold plasma), and biological (fermentation and enzymatic modification). To obtain the high quality and the desired texture of the food product, other ingredients besides proteins, such as water, fat, flavors, binders, dyes, vitamins, minerals, and antioxidants, also have to be used. The final product can be significantly influenced by the matrix composition, variety of ingredients, and water content, with the type of ingredients playing a role in either enhancing or constraining the desired texture of the food. There are several types of technologies used for meat and fish analogues production, including extrusion, shear cell technology, spinning, 3D printing, and others. Overall, the technologies used for meat and fish analogues production are constantly evolving as new innovations are developed and existing methods are improved. These developments have led to the creation of plant-based products that have a similar texture, taste, and nutritional profile to meat and fish, making them more appealing to consumers seeking alternatives to animal-based products.

Effects of protease-assisted aqueous extraction on almond protein profile, digestibility, and antigenicity

Almonds (Prunus dulcis) are one of the most consumed tree nuts worldwide and have been recognized as a healthy and nutritious food. Nevertheless, almonds are also a source of allergenic proteins that can trigger several mild to life-threatening allergic reactions. The effects of selected extraction conditions (aqueous vs. protease-assisted aqueous extraction) on the protein profile determined by proteomics analysis of excised SDS-PAGE gel bands, in vitro protein digestibility, and immunoreactivity of almond protein extracts, were evaluated. Proteolysis altered almond protein sequential and conformational characteristics thus affecting digestibility and antigenicity. Proteomics analysis revealed that enzymatic extraction resulted in the reduction of allergen proteins and epitopes. While complete hydrolysis of Prunin 1 and 2 α-chain was observed, Prunin 1 and 2 β-chains were more resistant to hydrolysis. Protein in vitro digestibility increased from 79.1 to 88.5% after proteolysis, as determined by a static digestion model. The degree of hydrolysis (DH) and peptide content of enzymatically extracted proteins during gastric and duodenal digestion were significantly higher than the ones from unhydrolyzed proteins. Proteolysis resulted in a 75% reduction in almond protein immunoreactivity as determined by a sandwich enzyme-linked immunosorbent assay and a reduction in IgE and IgG reactivities using human sera. The present study shows that moderated hydrolysis (7% DH) using protease can be used as a strategy to improve almond protein digestibility and reduce antigenicity. This study's findings could further enhance the potential use of almond protein hydrolysates in the formulation of hypoallergenic food products with improved nutritional quality and safety.

Current Status and Nutritional Value of Green Leaf Protein

Green leaf biomass is one of the largest underutilized sources of nutrients worldwide. Whether it is purposely cultivated (forage crops, duckweed) or upcycled as a waste stream from the mass-produced agricultural crops (discarded leaves, offcuts, tops, peels, or pulp), the green biomass can be established as a viable alternative source of plant proteins in food and feed processing formulations. Rubisco is a major component of all green leaves, comprising up to 50% of soluble leaf protein, and offers many advantageous functional features in terms of essential amino acid profile, reduced allergenicity, enhanced gelation, foaming, emulsification, and textural properties. Nutrient profiles of green leaf biomass differ considerably from those of plant seeds in protein quality, vitamin and mineral concentration, and omega 6/3 fatty acid profiles. Emerging technological improvements in processing fractions, protein quality, and organoleptic profiles will enhance the nutritional quality of green leaf proteins as well as address scaling and sustainability challenges associated with the growing global demand for high quality nutrition.

Emerging plant proteins as nanocarriers of bioactive compounds

The high prevalence of chronic illnesses, including cancer, diabetes, obesity, and cardiovascular diseases has become a growing concern for modern society. Recently, various bioactive compounds (bioactives) are shown to have a diversity of health-beneficial impacts on a wide range of disorders. But the application of these bioactives in food and pharmaceutical formulations is limited due to their poor water solubility and low bioaccessibility/bioavailability. Plant proteins are green alternatives for designing biopolymeric nanoparticles as appropriate nanocarriers thanks to their amphiphilic nature compatible with many bioactives and unique functional properties. Recently, emerging plant proteins (EPPs) are employed as nanocarriers for protection and targeted delivery of bioactives and also improving their stability and shelf-life. EPPs could enhance the solubility, stability, and bioavailability of bioactives by different types of delivery systems. In addition, the use of EPPs in combination with other biopolymers like polysaccharides was found to make a favorable wall material for food bioactives. This review article covers the various sources and importance of EPPs along with different encapsulation techniques of bioactives. Characterization of EPPs for encapsulation is also investigated. Furthermore, the focus is on the application of EPPs as nanocarriers for food bioactives.

Effects of ultrasonic-assisted pH shift treatment on physicochemical properties of electrospinning nanofibers made from rapeseed protein isolates

Electrospinning nanofibers (NFs) made from natural proteins have drawn increasing attention recently. Rapeseed meal is a by-product that rich in protein but not fully utilized due to poor properties. Therefore, modification of rapeseed protein isolates (RPI) is necessary to expand applications. In this study, pH shift alone or ultrasonic-assisted pH shift treatment was adopted, the solubility of RPI, along with the conductivity and viscosity of the electrospinning solution were detected. Moreover, the microstructure and functional characteristics of the electrospinning NFs, as well as the antibacterial activity of clove essential oil loaded-NFs were investigated. The tested parameters were remarkably improved after different treatments compared with the control, and synergistic effects were observed, especially under alkaline conditions. Hence, pH_12.5 + US showed the maximum value of solubility, conductivity, and viscosity, which was more than 7-fold, 3-fold, and almost 1-fold higher than the control respectively. Additionally, SEM and AFM images showed a finer and smoother surface of NFs after treatments, and the finest diameter of 216.7 nm was obtained after pH_12.5 + US treatment in comparison with 450.0 nm in control. FTIR spectroscopy of NFs demonstrated spatial structure changes of RPI, and improved thermal stability and mechanical strength of NFs were achieved after different treatments. Furthermore, an inhibition zone with a diameter of 22.8 mm was observed from the composite NFs. This study indicated the effectiveness of ultrasonic-assisted pH shift treatment on the physicochemical properties improvement and functional enhancement of NFs made from RPI, as well as the potential antibacterial application of the composite NFs in the future.

Effects of dual succinylation and ultrasonication modification on the structural and functional properties of ovalbumin

In this study, the functional properties of ovalbumin (OVA) were improved through dual modification with succinylation (succinylation degrees of 32.1 % [S1], 74.2 % [S2], and 95.2 % [S3]) and ultrasonication (ultrasonication durations of 5 min [U1], 15 min [U2], and 25 min [U3]), and the changes in protein structures were explored. Results showed that as the succinylation degree was increased, the particle size and surface hydrophobicity of S-OVA decreased by the maximum values of 2.2 and 2.4 times, respectively, causing emulsibility and emulsifying stability to increase by 2.7 and 7.3 times, respectively. After ultrasonic treatment, the particle size of succinylated-ultrasonicated OVA (SU-OVA) had decreased by 3.0-5.1 times relative to that of S-OVA. Moreover, the net negative charge of S3U3-OVA had increased to the maximum value of - 35.6 mV. These changes contributed to the further enhancement in functional indicators. The unfolding of the protein structure and the conformational flexibility of SU-OVA were illustrated and compared with those of S-OVA via protein electrophoresis, circular dichroism spectroscopy, intrinsic fluorescence spectroscopy, and scanning electron microscopy. The dually modified OVA emulsion (S3U3-E) presented small droplets (243.33 nm), reduced viscosity, and weakened gelation behavior that were indicative of even distribution, which was visually proven by confocal laser scanning microscopy images. Furthermore, S3U3-E exhibited favorable stability, a particle size that was almost unchanged, and a low polydispersity index (<0.1) over 21 days of storage at 4 °C. The above results demonstrated that succinylation combined with ultrasonic treatment could be an effective dual modification method for enhancing the functional performance of OVA.

Trends in millet and pseudomillet proteins - Characterization, processing and food applications

Millets are small-seeded crops which have been well adopted globally owing to their high concentration of macro and micronutrients such as protein, dietary fibre, essential fatty acids, minerals and vitamins. Considering their climate resilience and potential role in nutritional and health security, the year 2023 has been declared as 'International Year of Millets' by the United Nations. Cereals being the major nutrient vehicle for a majority population, and proteins being the second most abundant nutrient in millets, these grains can be a suitable alternative for plant-based proteins. Therefore, this review was written with an aim to succinctly provide an overview of the available literature take on the characterization, processing and applications of millet-based proteins. This information would play an important role in realizing the research gap restricting the utilization of complete potential of millet proteins. This can be further used by researchers and food industries for understanding the scope of millet proteins as an ingredient for novel food product development.

Molecular dynamic (in silico) modeling of structure-function of glutelin type-B 5-like from proso millet storage protein: effects of temperature and pressure

Molecular dynamic (MD) simulation provides an insight into the behavior of a protein under applied processing at the molecular level. The behavior of glutelin type-B 5-like protein, a type of glutelin protein from proso millet was studied, in solution under different temperatures (300, 350, and 400 K) and pressure (1 bar, 3 kbar, and 6 kbar) levels using a molecular dynamics simulation approach. The combined treatment effect (400 K, 6 kbar) increased the compaction of the protein compared to the level at (300 K, 1 bar) as shown by the decreased radius of gyration values from 3.26 to 2.92 nm, decreased solvent accessibility surface area from 327.47 to 311.06 nm2 and decreased volume from 108.35 to 105.04 nm3. The root means square deviation increased with increasing temperature but decreased with increasing pressure while the root means square fluctuations increased significantly with increased in temperature and pressure. A snapshot of the three-dimensional structure of the protein revealed compression of its occluded cavities at higher pressure levels but no obvious disruption to the secondary structure elements of the protein was observed, except for the loss of a few amino acid residues that comprise the secondary structure element.

Supplementary Information

The online version contains supplementary material available at 10.1007/s13197-022-05594-y.

Impacts of sonication and high hydrostatic pressure on the structural and physicochemical properties of quinoa protein isolate dispersions at acidic, neutral and alkaline pHs

Herein, 1 wt% quinoa protein isolate (QPI) was exposed to sonication using a 20 kHz ultrasonicator equipped with a 6 mm horn (14.4 W, 10 mL, up to 15 min) or high hydrostatic pressure (HHP, up to 600 MPa, 15 min) treatments at pH 5, pH 7, and pH 9. The changes to physicochemical properties were probed by SDS-PAGE, FTIR, free sulfhydryl group (SH), surface hydrophobicity (H₀), particle size and solubility. As revealed by SDS-PAGE, substantial amounts of 11S globulin participated in the formations of aggregates via SS bond under HHP, particularly at pH 7 and pH 9. However, protein profiles of QPI were not significantly affected by the sonication. Free SH groups and surface hydrophobicity were increased after the sonication treatment indicating protein unfolding and exposure of the embedded SH and/or hydrophobic groups. An opposite trend was observed in HHP treated samples, implying aggregation and reassociation of structures under HHP. HHP and sonication treatments induced a decrease in ordered secondary structures (random coil and β-turn) accompanied with an increase in disordered secondary structures (α-helix and β-sheet) as probed by FTIR. Finally, the sonication treatment induced a significant improvement in the solubility (up to ∼3 folds at pH 7 and ∼2.6 folds at pH 9) and a reduction in particle sizes (up to ∼3 folds at pH 7 and ∼4.4 folds at pH 9). However, HHP treatment (600 MPa) only slightly increased the solubility (∼1.6 folds at pH 7 and ∼1.2 folds at pH 9) and decreased the particle size (∼1.3 folds at pH 7 and ∼1.2 folds at pH 9). This study provides a direct comparison of the impacts of sonication and HHP treatment on QPI, which will enable to choose the appropriate processing methods to achieve tailored properties of QPI.

Extraction Optimization, Functional and Thermal Properties of Protein from Cherimoya Seed as an Unexploited By-Product

Plant-based proteins are gaining in attraction compared with animal-based proteins due to their superior ethical profiles, growing concerns on the part of various organizations about animal health and welfare, and increased global greenhouse-gas emissions in meat production. In this study, the response surface methodology (RSM) using a Box-Behnken design (BBD) was applied to optimize the ultrasound-assisted alkaline extraction of cherimoya-seed proteins as valuable by-products. The effects of three pH, temperature, and time factors on the protein-extraction yield and protein content were investigated. The pH at 10.5 and temperature of 41.8 °C for 26.1 min were considered the optimal ultrasound-assisted alkaline-extraction conditions since they provided the maximum extraction yield (17.3%) and protein content (65.6%). An established extraction technique was employed to enhance the cherimoya-seed protein yield, purity, and functional properties. A thermogravimetric analysis (TGA) of the samples showed that the ultrasound-assisted alkaline extraction improved the thermal stability of the protein concentrate.

Texturized Vegetable Protein as a Source of Protein Fortification of Wheat Buns

Increasing interest in plant-based proteins is particularly relevant in the food service sector. For specific groups, e.g., older adults, it may be challenging to ensure the consumption of protein of sufficient quality. One way of doing this could be through the fortification of a staple food such as bread. This study examined wheat buns, in which 0%, 20%, 35% and 50% of the flour was replaced with three different milled texturized vegetable proteins (TVP) of different plant protein combinations. Sensory and baking qualities were evaluated through sensory profiling and measurements of rising ability, baking loss, protein content and colour. An expert assessment and a robustness test were conducted to evaluate potential use in the food service sector. By substituting 35% of the wheat flour with milled TVP, it was possible to increase the protein content of the buns by 83% (up to 25% of DM) and still maintain an acceptable quality. The different TVPs showed that pea and faba bean or pea, faba bean and quinoa were more suitable in bread fortification than pea, faba bean and hemp. The study demonstrates the potential for producing quality bread for people who need a high protein intake in all their meals.

Structural Analysis and Study of Gel Properties of Thermally-Induced Soybean Isolate-Potato Protein Gel System

Heat-induced composite gel systems consisting of different soybean protein isolate (SPI) and potato protein (PP) mixtures were studied to elucidate their "backbone" and property changes. This was achieved by comparing the ratio of non-network proteins, protein subunit composition, and aggregation of different gel samples. It was revealed that SPI was the "gel network backbone" and PP played the role of "filler" in the SPI-PP composite gel system. Compared with the composite gels at the same ratio, springiness and WHC decrease with PP addition. For hardness, PP addition showed a less linear trend. At the SPI-PP = 2/1 composite gel, hardness was more than doubled, while springiness and WHC did not decrease too much and increased the inter-protein binding. The hydrophobic interactions and electrostatic interactions and hydrogen bonding of the SPI gel system were enhanced. The scanning electron microscopy results showed that the SPI-based gel system was able to form a more compact and compatible gel network. This study demonstrates the use of PP as a potential filler that can effectively improve the gelling properties of SPI, thus providing a theoretical basis for the study of functional plant protein foods.

Relationship between flexibility and interfacial functional properties of soy protein isolate: succinylation modification

BACKGROUND

In this paper, the effects of different succinic anhydride (SA) additions on the flexibility of soy protein isolate (SPI) were investigated, and changes in protein conformation and interfacial functional properties were measured. The structure-effect relationship between conformation, flexibility, and interfacial functional properties was established.

RESULTS

SPI was bound to SA through disulfide bonds, and the zeta potential was reduced. The β-sheet content decreased, the disordered structure increased, and there were changes in tertiary structure and microstructure. The surface hydrophobicity, disulfide bond content, and solution turbidity were reduced to 5063, 1.0967 μmol g-1 , and 0.0036 μmol g-1 respectively. The best flexibility of SPI (0.3977) and interfacial functional properties were obtained when the mass ratio of SA/SPI was 15%. Correlation analysis showed a highly significant positive correlation (P < 0.01) between flexibility and emulsification and foaming properties, with correlation coefficients of 0.960 and 0.942 for flexibility with emulsifying activity and emulsion stability respectively, and 0.972 and 0.929 for flexibility with foaming capacity and foaming stability respectively.

CONCLUSION

The results suggest that succinylation-induced conformational changes of SPI improved its interfacial functional properties by changing its flexibility. These results provide theoretical guidelines for the development and application of highly emulsifiable and stable soy protein products utilizing succinylation. © 2022 Society of Chemical Industry.

A review of protein-phenolic acid interaction: reaction mechanisms and applications

Phenolic acids (PA) are types of phytochemicals with health benefits. The interaction between proteins and PAs can cause minor or extensive changes in the structure of proteins and subsequently affect various protein properties. This study investigates the protein/PA (PPA) interaction and its effects on the structural, physicochemical, and functional properties of the system. This work particularly focused on the ability of PAs as a subgroup of phenolic compounds (PC) on the modification of proteins. Different aspects including the influence of structure affinity relationship and molecular weight of PA on the protein interaction have been discussed in this review. The physicochemical properties of PPA change mainly due to the change of hydrophilic/hydrophobic parts and/or the formation of some covalent and non-covalent interactions. Furthermore, PPA interactions affecting functional properties were discussed in separate sections. Due to insufficient studies on the interaction of PPAs, understanding the mechanism and also the type of binding between protein and PA can help to develop a new generation of PPA. These systems seem to have good capabilities in the formulation of low-fat foods like high internal Phase Emulsions, drug delivery systems, hydrogel structures, multifunctional fibers or packaging films, and 3 D printing in the meat processing industry.

Recent advances on the impact of novel non-thermal technologies on structure and functionality of plant proteins: A comprehensive review

The recent trend in consumption of plant-based protein over animal protein opens up a new avenue for sustainable agriculture practice, less environmental impact and greenhouse gas emission. The modification of plant-based proteins by novel non-thermal technologies includes the structural transformation followed by the modulation of their functional properties that are exploited to develop a protein ingredient system for application in food formulation. This review explores the impact of non-thermal process technologies on structural modification of plant proteins followed by improvement in protein's function in food formulation. Novel concepts articulating the impact of non-thermal technologies on structural and functional modification of plant proteins affecting it's digestibility and bioavailability are addressed. Limitations and prospects of applying non-thermal technologies in developing an alternative plant-based protein food system are also summarized. Non-thermal processes are considered as the emerging technologies that results in conformational changes in secondary, tertiary and quaternary structure of plant proteins which helps in modification of functional properties without jeopardizing the organoleptic properties and bioactivity of the protein. However, extensive future study is needed to optimize the non-thermal process parameters along with the finding of new protein sources to achieve healthy and sustainable plant-based food system.

Dynamic high pressure treatments: current advances on mechanistic-cum-transport phenomena approaches and plant protein functionalization

Dynamic high pressure treatment (DHPT) either by high pressure homogenization or microfluidisation, is an emerging concept used in the food industry for new products development through macromolecules modifications in addition to simple mixing and emulsification action. Mechanistic understanding of droplets breakup during high pressure homogenization is used to understand how these compact and high molecular weight-sized globular plant proteins are affected during DHPTs. Plant protein needs to be functionalized for advanced use in food formulation. DHPTs brought changes in plant proteins' secondary, tertiary, and quaternary structures through alterations in intermolecular and intramolecular interactions, sulfhydryl groups, and disulfide bonds. These structural changes in plant proteins affected their functional and physicochemical properties like solubility, oil and water holding capacity, gelation, emulsification, foaming, and rheological properties. These remarkable changes made utilization of this concept in novel food system applications like in plant-based dairy analogues. Overall, this review provides a comprehensive and critical understanding of DHPTs on their mechanistic and transport approaches for droplet breakup, structural and functional modification of plant macromolecules. This article also explores the potential of DHPT for formulating plant-based dairy analogues to meet healthy and sustainable food consumption needs. HIGHLIGHTSIt critically reviews high pressure homogenization (HPH) and microfluidisation (DHPM).It explores the mechanistic and transport phenomena approaches of HPH and DHPMHPH and DHPM can induce conformational and structural changes in plant proteins.Improvement in the functional properties of HPH and DHPM treated plant proteins.HPH and DHPM are potentially applicable for plant based dairy alternatives food system.

Phosphorylated walnut protein isolate as a nanocarrier for enhanced water solubility and stability of curcumin

BACKGROUND

The low solubility and poor dispersion of alkaline-extracted walnut protein isolate (AWPI) limit its application as a protein-based carrier for the delivery of poorly soluble nutraceuticals, including curcumin. This work investigated the physicochemical characteristics of phosphorylated walnut protein isolate (PWPI) extracted using sodium tripolyphosphate (STP) and evaluated its encapsulation ability.

RESULTS

The results of phosphorus determination, X-ray photoelectron spectroscopy (XPS), and Fourier transform infrared (FTIR) spectroscopy confirmed the phosphorylation of the extracted PWPI. Circular dichroism (CD) analysis indicated that PWPI contained higher α-helix and lower β-sheet contents than AWPI. The PWPI prepared at pH 9.0 and 11.0 showed significantly improved solubility, similar surface hydrophobicity, and increased surface charges compared to the AWPI. Fluorescence quenching experiments indicated that the binding affinity of curcumin to PWPI was significantly higher than that of AWPI. When bound to PWPI, the solubility of curcumin in aqueous solution was greatly enhanced, with an 8700-fold increase at a nanocomplex concentration of 10 mg mL^-1 . The complexation of curcumin with PWPI significantly improved the storage stability of curcumin. Additionally, the PWPI-curcumin nanocomplexes showed significantly increased antioxidant capacity.

CONCLUSION

Phosphorylated walnut protein isolate showed greatly improved solubility and strong encapsulation ability, making it a promising nanocarrier for curcumin. © 2022 Society of Chemical Industry.