Transformation ofLactobacillus caseiby electroporation

Gene transfer by electroporation

Electroporation of cells in the presence of DNA is widely used for the introduction of transgenes either stably or transiently into bacterial, fungal, animal, and plant cells. A review of the literature shows that electroporation parameters are often reported in an incomplete or incorrect manner, forcing researchers to rely too much on a purely empirical trial and error approach. The goal of this article is to provide the reader with an understanding of electrical circuits used in electroporation experiments as well as physical and biological aspects of the electroporation process itself. Further, a simple paradigm is provided which unites all electroporation parameters. This article should be particularly useful to those new to the technique.

Efficient transformation of Lactobacillus sake by electroporation

A procedure to transform intact Lactobacillus sake cells by electroporation was developed through a systematic examination of the effect of changes in various parameters on the transformation efficiency of Lact. sake strain 64F. The most critical factors were found to be the electrical parameters, the composition of washing and electroporation/storage solutions, and the presence of MgCI₂ in the expression medium. Under optimal conditions transformation efficiencies up to 10⁷ transformants (μg supercoiled DNA)^-1 were obtained. The optimized procedure was successfully applied to other Lact. sake strains and consistently yielded from 10⁴ to 10⁷ transformants (μg supercoiled DNA)^-1.

A convenient and reproducible method to genetically transform bacteria of the genus Bifidobacterium

A protocol was developed for the introduction of foreign plasmid DNA into various Bifidobacterium strains. The method, which is applicable to all Bifidobacterium species tested so far, is based on electroporation of bacteria made competent by preincubation in electroporation buffer for several hours at 4 degrees C. Transformation of Bifidobacterium could be achieved with a plasmid vector originating from Bifidobacterium and with plasmid vectors from Corynebacterium, but not with vectors carrying replicons from Lactococcus or Lactobacillus.

Involvement of host cell energy in the transfection of Lactobacillus casei protoplasts with phage PL-1 DNA

Transfection of Lactobacillus casei ATCC 27092 protoplasts with phage PL-1 DNA was studied under various conditions. The process of transfection was dependent on the incubation temperature, and the apparent activation energy was calculated to be about 11 kcal/mol. Transfection was inhibited by treating the cells before protoplasting either with monoiodoacetate, N,N'-dicyclohexylcarbodiimide (DCCD), or NaN3, without affecting both the viability of uninfected cells and protoplasting. The addition of DCCD after mixing protoplasts and DNA had no influence on transfection efficiencies. The transfection of L. casei protoplasts with phage PL-1 DNA was considered to require cell energy such as proton-motive force, probably in the initial stages, although the direct involvement of cell energy in the transfer of DNA across the cell membrane is still unclear.

Expression of Lactobacillus casei ATCC 393 beta-galactosidase encoded by plasmid pLZ15 in Lactococcus lactis CNRZ 1123

Lactococcus lactis subsp. lactis CNRZ 1123, a Lac- derivative of CNRZ 1122 was transformed by electroporation with the Lactobacillus casei ATCC 393 plasmid pLZ15, which bears a beta-galactosidase gene. The transformants expressed a constitutive beta-galactosidase activity at a higher level than in Lact. casei, and in the cell-free extract two additional protein bands were detected by SDS-PAGE which could correspond to lactose metabolism enzymes. Both plasmid and beta-gal activity were stable in Lactococcus after 100 generations in glucose-containing medium.

Transformation of Actinomyces spp. by a gram-negative broad-host-range plasmid

The gram-negative broad-host-range vector pJRD215 was transferred by electroporation into strains of Actinomyces viscosus or Actinomyces naeslundii at efficiencies which ranged from 10(2) to 10(7) transformants per microgram of plasmid DNA. The Actinomyces transformants expressed pJRD215-encoded resistance to kanamycin and streptomycin. Moreover, the transforming plasmid DNA had not undergone any deletions or rearrangements, nor had it integrated into the genomes of these strains.

Electrotransformation of Streptococcus agalactiae with plasmid DNA

A protocol for efficient electrotransformation of Streptococcus agalactiae (group B streptococcus) Lancefield's strain O90R (NTCT 9993) (an unencapsulated derivative of type Ia strain O90) was developed. The Escherichia coli-Streptococcus shuttle vector pDP28 (7.8 kb) carrying the ermB gene for resistance to erythromycin was used as donor DNA. Frozen 'electrocompetent' cells were prepared by repeated washes in 10% glycerol. A 50-microliters aliquot containing about 5 x 10(9) colony forming units of bacteria was subjected to the electric pulse. Optimal conditions for electrotransformation were determined using different media, harvesting cells at different points of the growth curve, and using different field strengths. The dose-response curve for transformation of S. agalactiae with pDP28 showed one-hit kinetics as donor DNA varied between 0.01 and 3 micrograms. The efficiency of electrotransformation for this range of amounts of donor DNA was 1.2 x 10(4) cfu micrograms-1. The transformation frequencies obtained with this electroporation protocol are high enough to allow both subcloning and shotgun cloning of streptococcal DNA in S. agalactiae.

Electro-transformation of Clostridium beijerinckii NRRL B-592 with shuttle plasmid pHR106 and recombinant derivatives

Conditions for transformation of the solventogenic anaerobe Clostridium beijerinckii NRRL B-592 with plasmid DNA via electroporation are described. Shuttle plasmid pHR106 and two derivatives constructed in this study were transferred and were expressed in this organism. One recombinant derivative of pHR106 was constructed by separately subcloning the clostridial tetracycline (tetP) resistance genes into pHR106. The second vector conferring erythromycin resistance was obtained via in-vivo recombination. The new constructs, termed pRZL and pRZE respectively, were then transferred to C. beijerinckii in order to evaluate their potential as shuttle vectors. The recombinant plasmids were shown to transfer to C. beijerinckii and were expressed as autonomously replicating vectors. The use of these plasmids as cloning and shuttle vectors for C. beijerinckii is discussed.

Genetics of lactobacilli: plasmids and gene expression

This paper reviews the present knowledge of the structure and properties of small (< 5 kb) plasmids present in Lactobacillus spp. The data show that plasmids from Lactobacillus spp., like many plasmids from other Gram-positive bacteria, display a modular organization and replicate by a mechanism of rolling circle replication. Structurally, plasmids from lactobacilli are closely related to plasmids from other Gram-positive bacteria. They contain elements (plus- and minus origin of replication, element(s) for control of plasmid replication, mobilization function) showing extensive similarity to analogous elements in plasmids from these other organisms. It is believed that lactobacilli have acquired such elements by intra- and/or intergenic transfer mechanisms. The first part of the review is concluded with a description of plasmid vectors with a Lactobacillus replicon and integrative vectors, including data concerning their structural and segregational stability. In the second part of this review we describe the progress that has been made during the last few years in identifying and characterizing elements that control expression of genetic information in lactobacilli. Based on the sequence of eleven identified and twenty presumed promoters, some preliminary conclusions can be drawn regarding the structure of Lactobacillus promoters. A typical Lactobacillus promoter shows significant similarity to promoters from E. coli and B. subtilis. An analysis of published sequences of seventy genes indicates that the region encompassing the translation start codon AUG also shows extensive similarity to that of E. coli and B. subtilis. Codon usage of Lactobacillus genes is not random and shows interspecies as well as intraspecies heterogeneity. Interspecies differences may, in part, be explained by differences in G+C content of different lactobacilli. Differences in gene expression levels can, to a large extent, account for intraspecies differences of codon usage bias. Finally, we review the knowledge that has become available concerning protein secretion and heterologous gene expression in lactobacilli. This part is concluded with a compilation of data on the expression in Lactobacillus of heterologous genes under the control of their own promoter or under control of a Lactobacillus promoter.

Cloning of the gene for cholesterol oxidase in Bacillus spp., Lactobacillus reuteri and its expression in Escherichia coli

The cloning of the cholesterol oxidase gene in several Gram-positive bacteria, including Lactobacillus reuteri of intestinal origin, was obtained. Only the transformants of Escherichia coli harbouring the recombinant plasmid pCHOA showed a good intracellular enzyme activity. The heterologous gene was stably maintained in Gram-positive transformants but no enzyme activity was detected.

Structural and functional analysis of two cryptic plasmids from Lactobacillus pentosus MD353 and Lactobacillus plantarum ATCC 8014

The DNA sequences of a 2.4 kb plasmid (p353-2) from Lactobacillus pentosus MD353 and a 1.9 kb plasmid (p8014-2) from Lactobacillus plantarum ATCC 8014 show 81.5% overall similarity. Both plasmids carry elements (replication protein gene, plus-origin and minus-origin of replication), which are typical of plasmids that replicate via a rolling-circle mechanism of replication (RCR). Direct evidence for an RCR mechanism was obtained by showing the accumulation of single-stranded plasmid intermediates in the presence of rifampicin. A minus-origin of replication was defined for plasmids p353-2 and p8014-2 based on DNA sequence analysis and on its ability to convert single-stranded into double-stranded plasmid DNA. Plasmids pLPE323, pLPE350 and pLPC37 that are derived from the p353-2 or p8014-2 replicon are structurally and segregationally stable in L. pentosus MD353, L. plantarum ATCC 8014 and in Lactobacillus casei ATCC 393. The presence of Escherichia coli or lambda DNA fragments in vectors derived from p353-2 or p8014-2 does not affect the structural stability but results in segregational instability of the vectors. The instability increases with increasing size of the inserted DNA fragment. Since vectors based on these replicons can be efficiently propagated in a wide variety of Lactobacillus species, they are highly suitable for cloning and expression of foreign DNA in Lactobacillus, provided that selective pressure is applied.

Construction and characterization of shuttle plasmids for lactic acid bacteria and Escherichia coli

The chimeric plasmid pBN183 was first constructed in Escherichia coli by ligating the BamHI-digested E. coli plasmid pBR322 and a Bg/II-linearized streptococcal plasmid, pNZ18. The pBN183 transformed E. coli to ApR at a frequency of (8.2 +/- 1.2) x 10(5) colony forming units (CFU)/microgram DNA. Electrotransformation of Streptococcus thermophilus with pBN183 yielded CmR, ApS clones at a frequency of (2.6 +/- 0.3) x 10(1) CFU/microgram DNA. Plasmid screening with pBN183-transformed S. thermophilus clones revealed that ca. 70% of these transformants contained deleted plasmids. Plasmid pBN183A, a pBN183 deletion mutant lacking one copy of a tandemly arranged, highly homologous DNA sequence, was isolated for further study. It transformed E. coli to ApR and S. thermophilus to CmR with frequencies of (4.8 +/- 0.1) x 10(5) and (8.1 +/- 0.2) x 10(2) CFU/microgram DNA, respectively. Screening of S. thermophilus transformants did not show the presence of deleted plasmids. Based on the structure of pBN183A, a new shuttle plasmid, pDBN183, was constructed from pBN183 by removal of the small (1.2 kb) Sa/I fragment. Transformation frequencies of pDBN183 were (5.0 +/- 1.3) x 10(5) and (4.6 +/- 0.2) x 10(2) CFU/microgram DNA with E. coli and S. thermophilus, respectively. In contrast to the parent pBN183, only 17% of the pDBN183-transformed S. thermophilus contained deleted plasmids. Plasmid copy numbers of the three vectors in E. coli were estimated at 17-18 per chromosome. The three plasmids conferred ApR and CmR to E. coli, but only CmR to S. thermophilus. The insertion of a Streptomyces cholesterol oxidase gene (choA) into pDBN183 did not affect the plasmid's stability in Lactobacillus casei, but resulted in deletion of the recombinant DNA in S. thermophilus.

Mobilization and location of the genetic determinant of chloramphenicol resistance from Lactobacillus plantarum caTC2R

The mobilization of a nonconjugative plasmid (pCaT) that mediates chloramphenicol resistance in Lactobacillus plantarum caTC2R was achieved by comobilization with the conjugative plasmid pAM beta 1. The conjugation studies confirmed that the 8.5-kb pCaT in L. plantarum caTC2R contains the gene responsible for chloramphenicol resistance and that the plasmid has several unique restriction sites which make it useful for genetic studies in Carnobacterium spp. Cloning studies showed that the gene responsible for chloramphenicol resistance is located in the 2.6-kb EcoRV-SalI region of pCaT. This was confirmed by probing the 3.0-kb BglII fragment of pCaT with a biotin-labeled 1.6-kb BstEII-HpaII fragment from the streptococcal-derived plasmid pVA797(Cmr). Expression of chloramphenicol resistance in Carnobacterium as well as in other Lactobacillus species was achieved by electrotransformation using donor DNA from pCaT.

Cloning, sequence, and phenotypic expression of katA, which encodes the catalase of Lactobacillus sake LTH677

Lactobacillus sake LTH677 is a strain, isolated from fermented sausage, which forms a heme-dependent catalase. This rare property is highly desirable in sausage fermentation, as it prevents rancidity and discoloration caused by hydrogen peroxide. A gene bank containing MboI fragments of chromosomal DNA from Lactobacillus sake LTH677 in Escherichia coli plasmid pBR328 was constructed. The catalase gene was cloned by heterologous complementation of the Kat- phenotype of E. coli UM2. The catalase structural gene, designated katA, was assigned to a 2.3-kb region by deletion analysis of the originally cloned fragment in plasmid pHK1000. The original chromosomal arrangement was determined by Southern hybridization. Protein analysis revealed that the catalase subunit has a molecular size of 65,000 Da and that the active catalase possesses a hexameric structure. The molecular size of the subunit deduced from the nucleotide sequence was determined to 54,504 Da. The N-terminal amino acid sequence of the 65,000-Da protein corresponded to the one deduced from the DNA sequence. After recloning of katA in the E. coli-Lactococcus shuttle vector pGKV210, the gene was successfully transferred and phenotypically expressed in Lactobacillus casei, which is naturally deficient in catalase activity.

Cloning and expression of the lysostaphin gene in Bacillus subtilis and Lactobadllus casei

The lysostaphin structural gene was cloned in Bacillus subtilis DSM402 and in Lactobacillus casei 102S. The gene was expressed in both organisms and active lysostaphin was released into the medium. Lysostaphin produced by these organisms induced lysis of growing and heat inactivated staphylococci. Expression in a protective starter organism is a prerequisite to produce lysostaphin in situ in fermenting foods and hence, to reduce the hygienical risk of staphylococcal food poisoning.

Shuttle plasmid vectors for Lactobacillus casei and Escherichia coli with a minus origin

Recombinant plasmids which can be used as shuttle vectors between Escherichia coli and the industrially used strains of Lactobacillus casei were constructed. They have replication regions closely related to those of pUB110 and are likely to replicate by a rolling-circle mechanism via a plus-strand-specific DNA intermediate in L. casei. Both orientations of palA from the staphylococcal plasmid pC194 and those of the intergenic region from coliphage M13 are identified as active minus origins in L. casei, in contrast to the pAM alpha 1 delta 1-derived BA3 minus origin which does not function in L. casei. Stability of the plasmids increased in L. casei when one of these two active minus origins was inserted. All the DNA sequences of the constructed vectors were known.

Organization and characterization of three genes involved in D-xylose catabolism in Lactobacillus pentosus

A cluster of three genes involved in D-xylose catabolism (viz. xylose genes) in Lactobacillus pentosus has been cloned in Escherichia coli and characterized by nucleotide sequence analysis. The deduced gene products show considerable sequence similarity to a repressor protein involved in the regulation of expression of xylose genes in Bacillus subtilis (58%), to E. coli and B. subtilis D-xylose isomerase (68% and 77%, respectively), and to E. coli D-xylulose kinase (58%). The cloned genes represent functional xylose genes since they are able to complement the inability of a L. casei strain to ferment D-xylose. NMR analysis confirmed that 13C-xylose was converted into 13C-acetate in L. casei cells transformed with L. pentosus xylose genes but not in untransformed L. casei cells. Comparison with the aligned amino acid sequences of D-xylose isomerases of different bacteria suggests that L. pentosus D-xylose isomerase belongs to the same similarity group as B. subtilis and E. coli D-xylose isomerase and not to a second similarity group comprising D-xylose isomerases of Streptomyces violaceoniger, Ampullariella sp. and Actinoplanes. The organization of the L. pentosus xylose genes, 5'-xylR (1167 bp, repressor) - xylA (1350 bp, D-xylose isomerase) - xylB (1506 bp, D-xylulose kinase) - 3' is similar to that in B. subtilis. In contrast to B. subtilis xylR, L. pentosus xylR is transcribed in the same direction as xylA and xylB.

Complementation of the inability of Lactobacillus strains to utilize D-xylose with D-xylose catabolism-encoding genes of Lactobacillus pentosus

The inability of two Lactobacillus strains to ferment D-xylose was complemented by the introduction of Lactobacillus pentosus genes encoding D-xylose isomerase, D-xylulose kinase, and a D-xylose catabolism regulatory protein. This result opens the possibility of using D-xylose fermentation as a food-grade selection marker for Lactobacillus spp.

Single-stranded DNA plasmid, vector construction and cloning of Bacillus stearothermophilus alpha-amylase in Lactobacillus

Vector plasmids were constructed by ligating chloramphenicol and erythromycin resistance genes to TaqI-digested DNA of a cryptic plasmid from Lactobacillus plantarum. The minimal region of Lactobacillus plasmid DNA that was required for DNA replication was defined and a single-stranded DNA intermediate replication system was observed. Homologies with other origins of replication of plasmids from Gram-positive bacteria, replicating via rolling circle mechanism, were found. It was shown that the constructed vectors, named pPSC20 and pPSC22, were transformable into L. plantarum, Lactobacillus acidophilus, Lactobacillus reuteri, Lactobacillus fermentum, Lactobacillus helveticus, Lactococcus lactis subsp. lactis, Bacillus subtilis, and Escherichia coli. Using plasmid pPSC22, the alpha-amylase gene of Bacillus stearothermophilus was cloned and expressed in several Lactobacillus species.

Incompatibility of Lactobacillus Vectors with Replicons Derived from Small Cryptic Lactobacillus Plasmids and Segregational Instability of the Introduced Vectors

Three new Lactobacillus vectors based on cryptic Lactobacillus plasmids were constructed. The shuttle vector pLP3537 consists of a 2.3-kb plasmid from Lactobacillus pentosus MD353, an erythromycin resistance gene from Staphylococcus aureus plasmid pE194, and pUC19 as a replicon for Escherichia coli . The vectors pLPE317 and pLPE323, which do not contain E. coli sequences, were generated by introducing the erythromycin resistance gene of pE194 into a 1.7- and a 2.3-kb plasmid from L. pentosus MD353, respectively. These vectors and the shuttle vector pLP825 (M. Posno, R. J. Leer, J. M. M. van Rijn, B. C. Lokman, and P. H. Pouwels, p. 397-401, in A. T. Ganesan and J. A. Hoch, ed., Genetics and biotechnology of bacilli, vol. 2, 1988) could be introduced by electroporation into Lactobacillus casei, L. pentosus, L. plantarum, L. acidophilus, L. fermentum , and L. brevis strains with similar efficiencies. Transformation efficiencies were strain dependent and varied from 10 2 to 10 7 transformants per μg of DNA. Plasmid DNA analysis of L. pentosus MD353 transformants revealed that the introduction of pLP3537 or pLPE323 was invariably accompanied by loss of the endogenous 2.3-kb plasmid. Remarkably, pLPE317 could only be introduced into an L. pentosus MD353 strain that had been previously cured of its endogenous 1.7-kb plasmid. The curing phenomena are most likely to be explained by the incompatibility of the vectors and resident plasmids. Lactobacillus vectors are generally rapidly lost when cells are cultivated in the absence of selective pressure. However, pLPE323 is stable in three of four Lactobacillus strains tested so far.

Electroporation-induced transformation of Escherichia coli: evaluation of a square waveform pulse

Four strains of Escherichia coli were tested for electroporation-induced plasmid transformation using a high voltage pulse in a square waveform. Conditions for optimal transformation were determined for each strain and transformation frequencies found to be comparable to those reported previously for E. coli with a sinusoidal waveform of exponential decaying pulse.

Characterization of gram-positive broad host-range plasmids carrying a thermophilic replicon

The cryptic plasmid pBC1 (1.6 kb) isolated from Bacillus coagulans Zu1961 was genetically marked with the genes for chloramphenicol and ampicillin resistance (CmR and ApR) from the Escherichia coli plasmid pJH101. The recombinant vector obtained (pCP49, 7.0 kb) replicated and expressed CmR in B. subtilis and CmR and ApR in E. coli. Different shuttle vectors for Gram+ bacteria were also constructed by inserting pBC1 into the Staphylococcus aureus plasmid pC194. The smallest of these, pLM6 (2.8 kb), containing essentially pBC1 and the chloramphenicol acetyl transferase gene from pC194, replicated in B. subtilis at a copy number of 60. By electroporation, these plasmids were introduced and stably maintained in B. subtilis, B. amyloliquefaciens, S. aureus, S. carnosus and Lactobacillus reuteri.

Genetic construction of nisin-producing Lactococcus lactis subsp. cremoris and analysis of a rapid method for conjugation

Conjugation was used to construct nisin-producing Lactococcus lactis subsp. cremoris strains. Recipients were obtained by electroporation of L. lactis subsp. cremoris strains with the drug resistance plasmid pGK13 or pGB301. A method, direct-plate conjugation, was developed in which donor and recipient cells were concentrated and then combined directly on selective media. This method facilitated transfer of the nisin-sucrose (Nip+ Suc+) phenotype from the donor strain, L. lactis subsp. lactis 11454, to three L. lactis subsp. cremoris recipient strains. Nip+ Suc+ L. lactis subsp. cremoris transconjugants were obtained at frequencies which ranged from 10(-7) to 10(-8) per donor CFU. DNA-DNA hybridization to transconjugant DNAs, performed with an oligonucleotide probe synthesized to detect the nisin precursor gene, showed that this gene was transferred during conjugation but was not associated with detectable plasmid DNA. Further investigation indicated that L. lactis subsp. cremoris Nip+ Suc+ transconjugants retained the recipient strain phenotype with respect to bacteriophage resistance and acid production in milk. Results suggested that it would be feasible to construct nisin-producing L. lactis subsp. cremoris strains for application as mixed and multiple starter systems. Additionally, the direct-plate conjugation method required less time than filter or milk agar matings and may also be useful for investigations of conjugal mechanisms in these organisms.

Optimized conditions for electrotransformation of bacteria are related to the extent of electropermeabilization

Electropulsation is a simple and efficient way to introduce cloned genes into a variety of cell types, even with walled species. In the case of bacteria, we observed no direct correlation between survival rate and transformation yield. In the present work, we show that the yield of transformation is directly related to the level of the electric-field induced level of cell permeabilization. From experiments on Escherichia coli, it was confirmed that the extent of associated ATP leakage was a reliable assay. This approach was extended to other strains, such as Salmonella typhimurium, which to date had not been electrotransformed by plasmids.

Characterization and molecular cloning of Bifidobacterium longum cryptic plasmid pMB1

The small cryptic plasmid pMB1 (1.9 kb), previously isolated from Bifidobacterium longum, has been characterized by physical mapping. Two cloning vectors, pMR3 and pDG7, carrying chloramphenicol and ampicillin resistances derived from pJH101, have been electroporated in Escherichia coli.

High efficiency introduction of plasmid DNA into glycine treated Enterococcus faecalis by electroporation

A highly efficient electroporation system for Enterococcus faecalis was developed by systematically optimizing different parameters. One parameter found to be particularly critical for electroporation was cultivation of E. faecalis in medium containing a high glycine concentration, prior to electroporation. Osmotic stabilization of cells with 0.5 M sucrose was also found to be critical during glycine treatment. 10(6) transformants per microgram of plasmid DNA were consistently obtained within 48 h. Electrocompetent preparations of E.-faecalis could be stored at - 70 degrees C without loss of competence.

Oral administration of TNP-Lactobacillus conjugates in mice: a model for evaluation of mucosal and systemic immune responses and memory formation elicited by transformed lactobacilli

Safe live vector systems are being developed for oral delivery of antigens. A transformation system for indigenous Lactobacillus species of the gastrointestinal tract is described. Model systems were set up to evaluate immune responses. Orally administered trinitrophenylized (TNP) Lactobacillus were examined for their ability to induce immunological memory formation via determination of specific antibody titres in serum. We demonstrate a direct correlation between the level of systemic memory formation, as revealed by specific anti-TNP IgG serum antibodies, and the TNP substitution ratio of the Lactobacillus suspension used for oral priming. The specific IgG anti-TNP serum titres were comparable to or even higher than the titres of parental intraperitoneally primed animals. These results demonstrate the feasibility of using orally administered antigen-Lactobacillus as a future approach to vaccination.

Transformation of Rhodococcus fascians by High-Voltage Electroporation and Development of R. fascians Cloning Vectors

The analysis of the virulence determinants of phytopathogenic Rhodococcus fascians has been hampered by the lack of a system for introducing exogenous DNA. We investigated the possibility of genetic transformation of R. fascians by high-voltage electroporation of intact bacterial cells in the presence of plasmid DNA. Electrotransformation in R. fascians D188 resulted in transformation frequencies ranging from 10 5 /μg of DNA to 10 7 /μg of DNA, depending on the DNA concentration. The effects of different electrical parameters and composition of electroporation medium on transformation efficiency are presented. By this transformation method, a cloning vector (pRF28) for R. fascians based on an indigenous 160-kilobase (chloramphenicol and cadmium resistance-encoding) plasmid pRF2 from strain NCPPB 1675 was developed. The origin of replication and the chloramphenicol resistance gene on pRF28 were used to construct cloning vectors that are capable of replication in R. fascians and Escherichia coli. The electroporation method presented was efficient enough to allow detection of the rare integration of replication-deficient pRF28 derivatives in the R. fascians D188 genome via either homologous or illegitimate recombination.

Electroporation and expression of the broad host-range plasmid pRK2501 in Azotobacter vinelandii

Azotobacter vinelandii cells were transformed via high-voltage electroporation, with the broad host-range plasmid pRK2501. The number of transformants was dependent on the applied voltage, capacitance, and recovery procedure after electroporation. For example, Log, 4.44 transformants microgram-1 DNA were recovered in the A. vinelandii cell suspension electroporated at 1500 V and 25 microF capacitance (time constant 29.0 ms) and recovered on LB agar amended with 0.5 microgram/ml-1 kanamycin (pRK2501 encodes for both kanamycin and tetracycline resistance). Electroporation at 2500 V and capacitance settings of 25 and 3 microF did not produce any transformants. Cell survival was also poor at high voltages. A. vinelandii transformants were not recovered on N-free agar medium. In addition, no viable cells were recovered on N-free agar after electroporation at 2500 V, 25 microF; 2500 V, 3 microF; and 1500 V, 25 microF. Electroporation may be a useful method to genetically transform Azotobacter species for use in physiological and/or genetic studies.

Transformation of Pseudomonas aeruginosa by electroporation

Optimum conditions were defined for the electrotransformation of Pseudomonas aeruginosa PAO1 with plasmid pLAFR1, resulting in a 1500-fold increase in transformation efficiency compared to conventional chemical transformation with MgCl2. In addition, PAO236 and two out of three recent clinical isolates of P. aeruginosa from the sputum of cystic fibrosis patients were successfully transformed with plasmid pUC19 1.8. The applied voltage and the electroporation buffer composition were shown to have the greatest effect on transformation efficiency. Freezing the cells and prolonged storage at -70 degrees C did not significantly affect the transformation efficiency. The clinical isolates tested had lower transformation efficiencies than PAO1.