Resonance frequency analysis in relation to jawbone characteristics and during early healing of implant installation

Clinical evaluation of the stability of implants placed at different supracrestal levels

PURPOSE

The aim of this study was to evaluate the stability during healing and before loading of implants placed at two different supracrestal levels according to their collar texture.

MATERIALS AND METHODS

This retrospective study included patients who received posterior implants with the same macro design. Implants with a machined collar were placed 0.3 mm above the crestal bone (M group), while those with a laser-microtextured collar were placed 1 mm above the crestal bone (L group). All implants healed in a single stage with healing abutments. Implant stability quotient (ISQ) values were determined using resonance frequency analysis immediately after implant placement during surgery and after 1, 4, 8, and 12 weeks after surgery. Other evaluated factors for stability included the implant diameter and length and the site of placement (maxilla or mandible).

RESULTS

In total, 103 implants (47 L, 56 M) were evaluated. The median ISQ values at baseline and 1 week after placement were significantly higher for the M group than for the L group (p=0.006 and p=0.031, respectively). There were no differences at the subsequent observation points. The ISQ value was higher for wide-diameter than regular diameter (p=0.001) and mandibular implants than maxillary implants (p=0.001 at 0-8. weeks; p=0.012 at 12 weeks) at all observation points. When diameter data were neglected, the implant length did not influence the ISQ value at all observation points.

CONCLUSION

Our results suggest that submerging implant more inside bone may only influence primary stability. Moreover, the implant diameter and site of placement influence primary and secondary stability before loading, whereas the implant length does not when its diameter is not accounted for.

The relationship between dental implant stability and trabecular bone structure using cone-beam computed tomography

Purpose

The objective of this study was to investigate the relationships between primary implant stability as measured by impact response frequency and the structural parameters of trabecular bone using cone-beam computed tomography(CBCT), excluding the effect of cortical bone thickness.

Methods

We measured the impact response of a dental implant placed into swine bone specimens composed of only trabecular bone without the cortical bone layer using an inductive sensor. The peak frequency of the impact response spectrum was determined as an implant stability criterion (SPF). The 3D microstructural parameters were calculated from CT images of the bone specimens obtained using both micro-CT and CBCT.

Results

SPF had significant positive correlations with trabecular bone structural parameters (BV/TV, BV, BS, BSD, Tb.Th, Tb.N, FD, and BS/BV) (P<0.01) while SPF demonstrated significant negative correlations with other microstructural parameters (Tb.Sp, Tb.Pf, and SMI) using micro-CT and CBCT (P<0.01).

Conclusions

There was an increase in implant stability prediction by combining BV/TV and SMI in the stepwise forward regression analysis. Bone with high volume density and low surface density shows high implant stability. Well-connected thick bone with small marrow spaces also shows high implant stability. The combination of bone density and architectural parameters measured using CBCT can predict the implant stability more accurately than the density alone in clinical diagnoses.

Correlation of bone vascularity in the posterior mandible and subsequent implant stability: a preliminary study

OBJECTIVES

Bone vascularity is an important factor in process of osseointegration. The aim of this study was to find whether or not blood perfusion of the bone around the prepared implant sites influences subsequent implant stability.

METHODS

Patients with bilaterally edentulous mandible were treated with dental implants. Bone vascularity in implant sites was previously noted using Laser Doppler Flowmetry (LDF). Implant stability quotient (ISQ) was measured during follow-up period of 26th week. Statistical distribution and correlation between LDF and ISQ values were presented. Other variables (type of implant loading; sex and distance from the apical part of implant sites to the roof of the mandibular canal) were collected and correlated with LDF values.

RESULTS

The mean recorded LDF value was 53.05 perfusion unit. Eighteen implants were immediately loaded, and the other 18 were early loaded. In the group of early loaded implants, a statistically significant correlation between mean value of LDF and changing value of resonance frequency analysis (P < 0.05) was noted at 5th, 6th, 12th, and 26th weeks. Using Pearson coefficient of correlation, there was no statistically significant relationship between other variables and LDF values.

CONCLUSION

LDF values of implant sites might determine future implant stability.

Combined microcomputed tomography, biomechanical and histomorphometric analysis of the peri-implant bone: a pilot study in minipig model

OBJECTIVES

To present a practical approach that combines biomechanical tests, microcomputed tomography (μCT) and histomorphometry, providing quantitative results on bone structure and mechanical properties in a minipig model, in order to investigate the specific response to an innovative dental biomaterial.

METHODS

Titanium implants with innovative three-dimensional scaffolds were inserted in the tibias of 4 minipigs. Primary stability and osseointegration were investigated by means of insertion torque (IT) values, resonance frequency analysis (RFA), bone-to-implant contact (BIC), bone mineral density (BMD) and stereological measures of trabecular bone.

RESULTS

A significant positive correlation was found between IT and RFA (r=0.980, p=0.0001). BMD at the implant sites was 18% less than the reference values (p=0.0156). Peri-implant Tb.Th was 50% higher, while Tb.N was 50% lower than the reference zone (p<0.003) and they were negatively correlated (r=-0.897, p=0.006).

SIGNIFICANCE

μCT increases evaluation throughput and offers the possibility for qualitative three-dimensional recording of the bone-implant system as well as for non-destructive evaluation of bone architecture and mineral density, in combination with conventional analysis methods. The proposed multimodal approach allows to improve accuracy and reproducibility for peri-implant bone measurements and could support future investigations.

Clinical evaluation of osseointegration using resonance frequency analysis

The stability of the implant at the time of placement and during the development of the osseointegration process are the two major issues governing the implant survival. Implant stability is a mechanical phenomenon related to local factors such as bone quality, quantity, type of placement technique and type of implant used. The application of a user-friendly, clinically reliable, non-invasive method to assess implant stability and the osseointegration process is considered highly desirable. Resonance frequency analysis (RFA) is one such method which shows almost perfect reproducibility and repeatability after statistical analysis. The aim of this paper is to review the various methods used to assess implant stability and on the currently used RFA method which is being highly accepted in the recent times.

Comparative ex vivo evaluation of two electronic percussive testing devices measuring the stability of dental implants

BACKGROUND

A comparative ex vivo study was performed to determine electronic percussive test values (PTVs) measured by cabled and wireless electronic percussive testing (EPT) devices and to evaluate the intra- and interobserver reliability of the wireless EPT device.

METHODS

Forty implants were inserted into the vertebrae and forty into the pelvis of a steer, a safe distance apart. The implants were all 4.3 mm wide and 13 mm long, from the same manufacturer. PTV of each implant was measured by four different examiners, using both EPT devices, and compared. Additionally, the intra- and interobserver reliability of the wireless EPT device was evaluated.

RESULTS

Statistically significant differences (P <0.05) were observed between PTVs made by the two EPT devices. PTVs measured by the wireless EPT device were significantly higher than the cabled EPT device (P <0.05), indicating lower implant stability. The intraobserver reliability of the wireless EPT device was evaluated as excellent for the measurements in type II bone and good-to-excellent in type IV bone; interobserver reliability was evaluated as fair-to-good in both bone types.

CONCLUSION

The wireless EPT device gives PTVs higher than the cabled EPT device, indicating lower implant stability, and its inter- and intraobserver reliability is good and acceptable.

The Effect of Flapless and Full-thickness Flap Techniques on Implant Stability During the Healing Period

Purpose : When soft tissue flaps are reflected for implant placement, the blood supply from the periosteum to the bone is disrupted. The aim of this study was to compare the effects of the flapless (FL) and full-thickness flap (FT) techniques on implant stability. Methods : Nine patients received 22 implants. The implants were placed using the FL technique on the contralateral side of the jaw; the FT technique was used as the control technique. Resonance frequency analysis (RFA) was performed at the time of implant placement and at 6 and 12 weeks after implant placement. RFA values were compared between the FL and FT groups and between time intervals in the same group. Results : The median (interquartile range [IQR]) RFA values at the time of implant placement were 75.00 (15.00) for the FL technique and 75.00 (9.00) for the FT technique. At 6 weeks, the median (IQR) values were 79 (3.30) for the FL technique and 80 (12.70) for the FT technique. At 12 weeks, the median (IQR) values were 82.3 (3.30) for the FL technique and 82.6 (8.00) for the FT technique. There were no significant differences between the 2 techniques at the time of implant placement, after 6 weeks or after 12 weeks, with p values of 0.994, 0.789, and 0.959, respectively. There were significant differences between the RFA values at the time of implant placement and after 6 weeks for the FL technique (p=0.028) but not for the FT technique (p=0.091). There were also significant differences between the RFA values at 6 weeks and the RFA values at 12 weeks for the FL technique (p=0.007) and for the FT technique (p=0.003). Conclusion : Periosteum preservation during the FL procedure will speed up bone remodeling and result in early secondary implant stability as well as early loading.

Progressive immediate loading of a perforated maxillary sinus dental implant: a case report

The displacement of a dental implant into the maxillary sinus may lead to implant failure due to exposure of the apical third or the tip of the implant beyond the bone, resulting in soft tissue growth. This case report discusses dental implant placement in the upper first molar area with maxillary sinus involvement of approximately 2 mm. A new technique for progressive implant loading was used, involving immediately loaded implants with maxillary sinus perforation and low primary stability. Follow-up was performed with resonance frequency analysis and compared with an implant placed adjacent in the upper second premolar area using a conventional delayed loading protocol. Implants with maxillary sinus involvement showed increasing stability during the healing period. We found that progressive implant loading may be a safe technique for the placement of immediately loaded implants with maxillary sinus involvement.

Does Implant Design Affect Implant Primary Stability? A Resonance Frequency Analysis-Based Randomized Split-Mouth Clinical Trial

The purpose of this study was to assess implant stability in relation to implant design (conical vs. semiconical and wide-pitch vs narrow-pitch) using resonance frequency analysis. Twenty patients with bilateral edentulous maxillary premolar region were selected. In one hemiarch, conical implants with wide pitch (group 1) were installed; in the other hemiarch, semiconical implants with narrow pitch were installed (group 2). The implant allocation was randomized. The implant stability quotient (ISQ) was measured by resonance frequency analysis immediately following implant placement to assess primary stability (time 1) and at 90 days after placement (time 2). In group 1, the mean and standard deviation ISQ for time 1 was 65.8 ± 6.22 (95% confidence interval [CI], 55 to 80), and for time 2, it was 68.0 ± 5.52 (95% CI, 57 to 77). In group 2, the mean and standard deviation ISQ was 63.6 ± 5.95 (95% CI, 52 to 78) for time 1 and 67.0 ± 5.71 (95% CI, 58 to 78) for time 2. The statistical analysis demonstrated significant difference in the ISQ values between groups at time 1 (P = .007) and no statistical difference at time 2 (P = .54). The greater primary stability of conical implants with wide pitch compared with semiconical implants with narrow pitch might suggest a preference for the former in case of the adoption of immediate or early loading protocols.

Resonance frequency analysis, insertion torque, and bone to implant contact of 4 implant surfaces: comparison and correlation study in sheep

INTRODUCTION

Primary stability is evaluated using resonance frequency analysis (RFA) and insertion torque (IT). Although there is a strong correlation between RFA and IT, studies failed to find a correlation between RFA and bone to implant contact (BIC) or IT and BIC.

OBJECTIVE

To compare RFA, IT, and BIC of SLA, SLActive, Euroteknika, and TiUnite implant surfaces and evaluate the correlation between them.

MATERIALS AND METHODS

Thirty-two implants were placed in 8 sheep. RFA and IT were recorded. Animals were killed at 1 and 2 months.

RESULTS

A significant difference was found in RFA between the 4 surfaces. No significant difference was found for IT. Mean BIC was different between all 4 surfaces. A significant positive correlation was found between RFA and IT with SLA. No significant correlation was found between RFA and BIC and between IT and BIC at 1 and 2 months.

CONCLUSIONS

Implants with 4 different surfaces have similar IT values but different RFA and BIC. Additionally irrespective of the implant surface, there is no correlation between IT and BIC and between RFA and BIC.

Ultrasonic evaluation of dental implant osseointegration

Dental implants are widely used for oral rehabilitation. However, there remain risks of failure which are difficult to anticipate and depend on the implant osseointegration. The objective of this in vivo study is to determine the variation of the echographic ultrasonic response of a dental implant to bone healing around the implant interface. Twenty one dental implants were inserted in the femur of seven New Zealand white rabbits. Two animals were sacrificed after a healing duration of two weeks, three animals after six weeks and six animals after eleven weeks. The 10 MHz ultrasonic response of the implant was measured just after the implantation using a dedicated device positioned at the emerging surface of each dental implant. The measurements were realized again before the sacrifice with the same device. An indicator I˜ was derived based on the amplitude of the rf signal obtained for each configuration. The bone-Implant Contact (BIC) ratio was determined by histological analyses. The average value of the relative variation of the indicator I˜ obtained after initial surgery and after the corresponding healing period varies between 7% and 40%. A Kruskal-Wallis test (p<0.01) revealed a significant decrease of the value of the indicator I˜ as function of healing time. The indicator I˜ was significantly correlated (R(2)=0.45) with the BIC ratio. The results show that the ultrasonic response of a dental implant varies significantly as a function of healing time, which paves the way for the development of a new quantitative ultrasound (QUS) method in oral implantology.

The effects of implant angulation on the resonance frequency of a dental implant

Dental implants are ideally placed in an orientation that allows vertical transfer of occlusal forces along their long axis. Nevertheless, optimal situations for implant placement are seldom encountered resulting in implants placement in angulated positions, which may affect their long-term success. The resonance frequency (RF) is an objective tool used to monitor stability of the implant tissue integration; however, little is known of the effect of the implant orientation in bone on the RF and its potential significance. The purpose of this research was to determine the relation between the dental implant orientation and the corresponding RF of implant. Three-dimensional (3D) modelling software was used to construct a 3D model of a pig mandible from computed tomography (CT) images. The RF of the implant was analysed using finite element (FE) modal analysis in software ANSYS (v.12). In addition, a cubical model was also developed in MIMICS to investigate the parameters affecting the relationship between RF and implant orientation in a simplified environment. The orientation angle was increased from 0 to 10 degrees in 1 degree increments and the resulting RF was analysed using correlation analysis and one-way ANOVA. Our analysis illustrated that the RF fluctuation following altering implant orientation was strongly correlated (r=0.97) with the contacting cortical to cancellous bone ratio (CCBR) at the implant interface. The most extreme RF change (from 9.81kHz to 10.07kHz) occurred when the implant was moved 0.5mm in positive z-direction, which resulted in the maximum change of CCBR from 52.9 to 54.8.

Clinical study on survival rate of short implants placed in the posterior mandibular region: resonance frequency analysis

OBJECTIVE

Short implants are increasingly used, but there is doubt about their performance being similar to that of regular implants. The aim of this study was to compare the mechanical stability of short implants vs. regular implants placed in the edentulous posterior mandible.

MATERIAL AND METHODS

Twenty-three patients received a total of 48 short implants (5 × 5.5 mm and 5 × 7 mm) and 42 regular implants (4 × 10 mm and 4 × 11.5 mm) in the posterior mandible. Patients who received short implants had <10 mm of bone height measured from the bone crest to the outer wall of the mandibular canal. Resonance frequency analysis (RFA) was performed at time intervals T0 (immediately after implant placement), T1 (after 15 days), T2 (after 30 days), T3 (after 60 days), and T4 (after 90 days).

RESULTS

The survival rate after 90 days was 87.5% for the short implants and 100% for regular implants (P < 0.05). There was no significant difference between the implants in time intervals T1, T2, T3, and T4. In T0, the RFA values of 5 × 5.5 implants were higher than values of 5 × 7 and 4 × 11.5 implants (P < 0.05). A total of six short implants that were placed in four patients were lost (three of 5 × 5.5 mm and three of 5 × 7 mm). Three lost implants started with high ISQ values, which progressively decreased. The other three lost implants started with a slightly lower ISQ value, which rose and then began to fall.

CONCLUSIONS

Survival rate of short implants after 90 days was lower than that of regular implants. However, short implants may be considered a reasonable alternative for rehabilitation of severely resorbed mandibles with reduced height, to avoid performing bone reconstruction before implant placement. Patients need to be aware of the reduced survival rate compared with regular implants before implant placement to avoid disappointments.

A correlation between bone (B), insertion torque (IT), and implant stability (S): BITS score

STATEMENT OF PROBLEM

Although criteria for assessing bone quality have been reported, an overall score that correlates bone quality with the primary stability and secondary stability of implants is not yet available.

PURPOSE

The purpose of this article was to propose a scoring index that will establish a correlation among the bone density values from computed tomography, maximum insertion torque values, and resonance frequency analysis in different phases of implant treatment.

MATERIAL AND METHODS

In this study, 60 implant sites were evaluated to assess bone density (Hounsfield units), insertion torque values (Ncm), and primary stability and secondary stability (implant stability quotient values obtained by using resonance frequency analysis). On the basis of computed tomography data, the bone was classified as D1 to D4. The insertion torque was noted and classified into 2 groups, A and B. The implant stability quotient values obtained from resonance frequency analysis depicting primary stability and secondary stability were classified into 5 groups. The primary score noted was a result of the values obtained for the 3 parameters at the time of implant placement. The secondary score was obtained by considering the values of the bone density and resonance frequency analysis recorded at different time intervals.

RESULTS

Bone densities of D2, D3, and D4 were noted, dividing the bone type into 3 groups. The maximum torque noted in the study was 40 Ncm. The difference between various insertion torque values and bone types was found to be statistically nonsignificant. Higher mean implant stability quotient values were obtained for primary and secondary stability for the D2 bone than for D3 and D4 bone. When analyzed according to the time of insertion, the mean values increased at second stage surgery in all bone types. The difference in mean values among all bone types was found to be statistically significant (P<.001). A comparison of primary and secondary implant stability quotient values in all bone types did not find any statistical significance (P=.780). A score was recorded at the time of implant placement and at the time of second stage surgery, and the prosthetic treatment was planned accordingly.

CONCLUSIONS

The score highlights the importance of considering the association of bone quality, insertion torque values, and stability as denoted by implant stability quotient throughout treatment. Based on the variation in the score noted at recall visits, alterations in the treatment plan can be made with respect to the healing period and prosthetic design.

Mini-implant stability at the initial healing period: a clinical pilot study

OBJECTIVE

To evaluate the changes of mini-implant stability over the initial healing period in humans.

MATERIAL AND METHODS

A sample of 19 consecutively treated patients (mean age 15.5 ± 7.3 years) was examined. In each patient, a mini-implant of a size of 2 × 9 mm was inserted into the anterior palate. Implant stability was assessed using resonance frequency analysis (RFA) immediately after insertion (T0), 2 weeks later (T1), 4 weeks later (T2), and 6 weeks later (T3). Insertion depth (ID) and the maximum insertion torque (IT) were measured. Data were tested for correlations between RFA, ID, and IT. All RFA values were tested for statistically significant differences between the different times.

RESULTS

The mean ID was 7.5 ± 0.6 mm, and the mean IT was 16.8 ± 0.6 Ncm. A correlation was found between RFA and ID (r = .726, P < .0001), whereas no correlations between RFA and IT or between IT and ID were observed. From T0 to T1, the stability (36.1 ± 6.1 implant stability quotient [ISQ]) decreased nonsignificantly by 4.9 ± 6.1 ISQ values (P > .05). Between T1 and T2, the stability decreased highly significantly (P < .001) by 7.9 ± 5.9 ISQ values. From T2 on, RFA remained nearly unchanged (-1.7 ± 3.5 ISQ; P > .05).

CONCLUSIONS

Mini-implant stability is subject to changes during the healing process. During weeks 3 and 4, a significant decrease of the stability was observed. After 4 weeks, the stability did not change significantly.

Improving oral implant osseointegration in a murine model via Wnt signal amplification

AIM

To determine the key biological events occurring during implant failure and then we use this knowledge to develop new biology-based strategies that improve osseointegration.

MATERIALS AND METHODS

Wild-type and Axin2(LacZ/LacZ) adult male mice underwent oral implant placement, with and without primary stability. Peri-implant tissues were evaluated using histology, alkaline phosphatase (ALP) activity, tartrate resistant acid phosphatase (TRAP) activity and TUNEL staining. In addition, mineralization sites, collagenous matrix organization and the expression of bone markers in the peri-implant tissues were assessed.

RESULTS

Maxillary implants lacking primary stability show histological evidence of persistent fibrous encapsulation and mobility, which recapitulates the clinical problems of implant failure. Despite histological and molecular evidence of fibrous encapsulation, osteoblasts in the gap interface exhibit robust ALP activity. This mineralization activity is counteracted by osteoclast activity that resorbs any new bony matrix and consequently, the fibrous encapsulation remains. Using a genetic mouse model, we show that implants lacking primary stability undergo osseointegration, provided that Wnt signalling is amplified.

CONCLUSIONS

In a mouse model of oral implant failure caused by a lack of primary stability, we find evidence of active mineralization. This mineralization, however, is outpaced by robust bone resorption, which culminates in persistent fibrous encapsulation of the implant. Fibrous encapsulation can be prevented and osseointegration assured if Wnt signalling is elevated at the time of implant placement.

Impact of mini-implant length on stability at the initial healing period: a controlled clinical study

Introduction

Aim of the study was to assess the impact of the length of mini-implants inserted in the midpalatal region on the stability at the initial healing period.

Methods

A sample of 20 consecutively treated patients (15.6 ± 7.2 years) was examined. A long mini-implant with a length of 11 mm and a diameter of 2 mm was inserted into the anterior palate of each patient. Resonance frequency analysis (RFA) was performed after insertion (T0), two weeks (T1), four weeks (T2), and six weeks (T3). Insertion depth (ID) and the maximum insertion torque (IT) were measured. RFA, ID and IT data were tested for correlations. RFA values were tested for statistical differences between the different times. Data was compared to a matched control group of patients who received short mini-implants with a length of 9 mm and a diameter of 2 mm.

Results

Mean ID was 9.5 ± 0.6 mm and mean IT was 17.9 ± 3.8 Ncm. A correlation was found between RFA and ID (r = 0.59, P < .01). From T0 to T1 the stability (33.4 ± 3.5 ISQ) decreased highly significantly by 5.3 ± 3.5 ISQ values (P < .001) and significantly from T1 and T2 (P < .05) by 3.5 ± 3.7 ISQ values. From T2 on RFA nearly remained unchanged (−1.7 ± 3.9 ISQ; P > .05). At T1 stability was significantly lower than the control group. From T2 on there were no significant differences between the groups.

Conclusions

Long mini-implants provide high stability when inserted in the midpalatal region. After initial decrease RFA values remained stable from four weeks on and did not differ from the control group.

Trial registration

ID: 2013081293 (Clinical study register, University of Düsseldorf, Germany).

Biomechanical determinants of the stability of dental implants: influence of the bone-implant interface properties

Dental implants are now widely used for the replacement of missing teeth in fully or partially edentulous patients and for cranial reconstructions. However, risks of failure, which may have dramatic consequences, are still experienced and remain difficult to anticipate. The stability of biomaterials inserted in bone tissue depends on multiscale phenomena of biomechanical (bone-implant interlocking) and of biological (mechanotransduction) natures. The objective of this review is to provide an overview of the biomechanical behavior of the bone-dental implant interface as a function of its environment by considering in silico, ex vivo and in vivo studies including animal models as well as clinical studies. The biomechanical determinants of osseointegration phenomena are related to bone remodeling in the vicinity of the implants (adaptation of the bone structure to accommodate the presence of a biomaterial). Aspects related to the description of the interface and to its space-time multiscale nature will first be reviewed. Then, the various approaches used in the literature to measure implant stability and the bone-implant interface properties in vitro and in vivo will be described. Quantitative ultrasound methods are promising because they are cheap, non invasive and because of their lower spatial resolution around the implant compared to other biomechanical approaches.

The comparison between implant stability quotient and bone-implant contact revisited: an experiment in Beagle dog

BACKGROUND

Resonance frequency analysis (RFA) is applied clinically for the assessment of implant stability, and the relevance of this application is widely accepted. However, the relationship between resonance frequency (RF) and other parameters of implant stability, such as the histomorphometrical bone-to-implant contact (BIC) parameter, has become controversial in the last decade.

OBJECTIVE

To analyse and clarify the controversial relationship between RF and histomorphometrical BIC measurements.

MATERIAL AND METHODS

A total of 36 dental implants (9 mm length, Ø 4.0 mm; Biohorizons(®) Implant Systems Inc., Birmingham, AL, USA) with a soluble blasting media (sandblasting with soluble particles) surface were implanted in six beagle dog mandibles. RFA assessments were performed with a magnetic Osstel Mentor(®) device at the time of implant installation, and during the monitoring period at weeks 1, 2, 4, 6 and 8, before implant retrieval. The dogs were sacrificed and the implants were removed in block after 8, 6, 4, 2, 1 and 0 weeks, respectively. One group was obtained at time 0, immediately after the implantation. The samples were embedded in methyl methacrylate polymers (Technovit(®) ) and cut along their long axis. BIC values were assessed by a non-subjective and systematic method based on backscattered scanning electron microscopy (BS-SEM) images. BIC% at the different time points was compared with the corresponding implant stability quotient (ISQ) values of the RFA assessment.

RESULTS

No statistically significant correlation between BIC and ISQ values (Osstell Mentor(®) ) was identified. The absence of a relationship between these two parameters is in agreement with several previous studies in humans and experimental animals.

CONCLUSIONS

The lack of correlation between BIC and ISQ values suggests that ISQ as determined by RFA is not able to identify the relationship between RF and histomorphometrical data.

Immediate loading of trabecular metal-enhanced titanium dental implants: interim results from an international proof-of-principle study

OBJECTIVES

A 3-year proof-of-principle study was initiated to evaluate the clinical efficacy of immediately loading titanium dental implants with surfaces enhanced with porous tantalum trabecular metal (PTTM). First-year interim results are presented.

MATERIALS AND METHODS

Healthy, partially edentulous patients (n = 30) were enrolled and treated per protocol (minimum insertion torque: ≥35 Ncm) with 37 implants placed in one or two premolar or molar locations in either jaw (study group). Implants were immediately provisionalized out of occlusion with single acrylic crowns. After 7 to 14 days of soft tissue healing, implants were definitively restored in occlusion with ceramometal crowns. Because most study group implants (54.1%, n = 20) had less than 1 year of clinical follow-up, this interim analysis was limited to the first 22 consecutively placed implants in 17 subjects (10 women and 7 men) who completed 1 year of clinical follow-up to date (focus group).

RESULTS

To date, one implant failed to integrate in the study group (survival = 97.3%, n = 36/37). Focus group implants achieved 100% (n = 22/22) survival with 0.43 ± 0.41 mm of mean marginal bone loss. There were no serious complications.

CONCLUSION

Early clinical findings indicated that immediate loading of PTTM implants was safe and effective under the controlled study conditions.

Measurement of primary and secondary stability of dental implants by resonance frequency analysis method in mandible

Background. There is no doubt that the success of the dental implants depends on the stability. The aim of this work was to measure the stability of dental implants prior to loading the implants, using a resonance frequency analysis (RFA) by Osstell mentor device. Methods. Ten healthy and nonsmoker patients over 40 years of age with at least six months of complete or partial edentulous mouth received screw-type dental implants by a 1-stage procedure. RFA measurements were obtained at surgery and 1, 2, 3, 4, 5, 7, and 11 weeks after the implant surgery. Results. Among fifteen implants, the lowest mean stability measurement was for the 4th week after surgery in all bone types. At placement, the mean ISQ obtained with the magnetic device was 77.2 with 95% confidence interval (CI) = 2.49, and then it decreased until the 4th week to 72.13 (95% CI = 2.88), and at the last measurement, the mean implant stability significantly (P value <0.05) increased and recorded higher values to 75.6 (95% CI = 1.88), at the 11th week. Conclusions. The results may be indicative of a period of time when loading might be disadvantageous prior to the 4th week following implant placement. These suggestions need to be further assessed through future studies.

Effect of Platelet-Rich Plasma on the Outcome of Early Loaded Dental Implants: A 3-Year Follow-up Study

This study evaluated the effect of local application of platelet-rich plasma (PRP) on the outcome of early loaded implants. Two implants were placed in the posterior region or bilaterally symmetric to the median line of the maxilla. Then, PRP was either applied or not applied to the implant sockets. Outcome measures were prosthesis and implant success as well as biological and prosthetic complications. Stability of individual implants was assessed manually and with a resonance frequency analysis device. The implant stability quotient (ISQ) was recorded on the operation day, on postoperative day 4, and at postoperative week 1. At the end of the first postoperative week, implants with ISQ values &gt;60 were early loaded on day 7 with metal-ceramic crowns. Measurements were repeated at postoperative weeks 2, 3, and 4 and at postoperative months 6, 12, 24, and 36. One of the 64 implants was dropped out after 3 months of loading. No prosthesis failed. There were no prosthetic complications. Statistical analysis revealed significant differences between ISQ values of PRP and non-PRP implants on the operation day. Moreover, no statistically significant differences were found between ISQ values of PRP and non-PRP implants in the follow-up periods (P &gt; .05). No appreciable clinical effect was observed when using PRP in the maxilla.

A retrospective study on related factors affecting the survival rate of dental implants

PURPOSE

The aim of this retrospective study is to analyze the relationship between local factors and survival rate of dental implant which had been installed and restored in Seoul Veterans Hospital dental center for past 10 years. And when the relationship is found out, it could be helpful to predict the prognosis of dental implants.

MATERIALS AND METHODS

A retrospective study of patients receiving root-shaped screw-type dental implants placed from January 2000 to December 2009 was conducted. 6385 implants were placed in 3755 patients. The following data were collected from the dental records and radiographs: patient's age, gender, implant type and surface, length, diameter, location of implant placement, bone quality, prosthesis type. The correlations between these data and survival rate were analyzed. Statistical analysis was performed with the use of Kaplan-Meier analysis, Chi-square test and odds ratio.

RESULTS

In all, 6385 implants were placed in 3755 patients (3120 male, 635 female; mean age 65 ± 10.58 years). 108 implants failed and the cumulative survival rate was 96.33%. There were significant differences in age, implant type and surface, length, location and prosthesis type (P<.05). No significant differences were found in relation to the following factors: gender, diameter and bone quality (P>.05).

CONCLUSION

Related factors such as age, implant type, length, location and prosthesis type had a significant effect on the implant survival.

A comparative study of crestal bone loss and implant stability between osteotome and conventional implant insertion techniques: a randomized controlled clinical trial study

PURPOSE

The aim of this prospective randomized controlled clinical study was to assess the crestal bone loss and the implant stability in implants that were placed by the osteotome technique compared with the conventional drilling technique.

MATERIALS AND METHODS

Forty-six screw type Straumann SLA® oral implants (Straumann AG, Waldenburg, Switzerland) were inserted in the anterior segment of maxilla of 30 patients. The implant site was prepared randomly using either osteotome technique (test group) or the conventional drilling technique (control group). Radio frequency analysis (RFA) values at implant placement and after 3 months were recorded. The crestal bone loss was measured using digital subtraction radiography technique after 3, 6, and 12 months.

RESULTS

RFA demonstrated a statistically significant higher primary stability for implants in the osteotome group than that of the conventional group (p=.026) at the time of implant insertion. However, there was no statistically significant difference between both groups 3 months after the surgery (p=.06). At month 3, the osteotome group caused significantly more crestal bone loss than the conventional group (p=.04). At months 6 and 12, both groups had comparable bone levels (p=.29).

CONCLUSION

Osteotome technique yielded higher primary stability than conventional drilling technique. However, this technique was not superior to conventional technique after 3 months.

Stability changes of miniscrew implants over time

PURPOSE

To quantify in vivo changes in miniscrew implant (MSI) stability over time using resonance frequency analysis, and to determine if pilot holes and placement sites affect changes in MSI stability.

MATERIALS AND METHODS

Twenty-two self-tapping MSIs (1.6 mm wide and 9 mm long) were placed in the maxillae of 2 adult beagle dogs (20 months old). The Osstell Mentor was used to measure the implant stability quotient (ISQ) weekly for 8 weeks. A split-mouth design was used to evaluate the effects of 1.1-mm wide, 3-mm deep pilot holes.

RESULTS

The MSIs that failed showed significantly (P < .05) greater decreases in ISQ values during the first 3 weeks than the MSIs that remained stable. All of the MSIs that failed (41%) had been placed in nonkeratinized tissue. MSIs that remained stable throughout the study also showed significant decreases in ISQ values during the first 3 weeks, followed by increases during the fourth and fifth weeks. Changes in ISQ values of MSIs inserted into bone with and without pilot holes were comparable (P > .05).

CONCLUSION

Stability of unloaded MSIs decreased during the first 3 weeks and increased thereafter. Although the effects of pilot holes on stability could not be confirmed, placement of MSIs into nonkeratinized tissue negatively affected their stability and increased the likelihood of failures.

Ambiguity in bone tissue characteristics as presented in studies on dental implant planning and placement: a systematic review

OBJECTIVES

To survey definitions of bone tissue characteristics and methods of assessing them in studies of dental implant planning and placement.

MATERIAL AND METHODOLOGY

Three databases were searched using specified indexing terms. Three reviewers selected from the titles and retrieved abstracts in accordance with inclusion and exclusion criteria. Descriptions of bone tissue characteristics (bone quality, density and quantity) used before or during dental implant placement were searched for and categorized.

RESULTS

The search yielded 488 titles. One hundred and fort-nine publications were selected and read in full text. One hundred and eight were considered relevant. There were many different definitions and classification systems for bone tissue characteristics and examination protocols. Approximately two-third of the included publications reported the Lekholm & Zarb classification system for bone quality and quantity. However, only four studies implemented the Lekholm & Zarb system as originally proposed. A few publications described bone quality in accordance with the Misch or Trisi and Rao classifications systems. Assessment methods were often described only briefly (or not at all in one-fifth of the publications). Only one study presented the diagnostic accuracy of the assessment method, while only two presented observer performance.

CONCLUSION

The differing definitions and classification systems applied to dental implant planning and placement make it impossible to compare the results of various studies, particularly with respect to whether bone quality or quantity affect treatment outcomes. A consistent classification system for bone tissue characteristics is needed, as well as an appropriate description of bone tissue assessment methods, their diagnostic accuracy and observer performance.