Monitoring Crystallization Processes in Confined Porous Materials by Dynamic Nuclear Polarization Solid-State Nuclear Magnetic Resonance

Establishing mechanistic understanding of crystallization processes at the molecular level is challenging, as it requires both the detection of transient solid phases and monitoring the evolution of both liquid and solid phases as a function of time. Here, we demonstrate the application of dynamic nuclear polarization (DNP) enhanced NMR spectroscopy to study crystallization under nanoscopic confinement, revealing a viable approach to interrogate different stages of crystallization processes. We focus on crystallization of glycine within the nanometric pores (7-8 nm) of a tailored mesoporous SBA-15 silica material with wall-embedded TEMPO radicals. The results show that the early stages of crystallization, characterized by the transition from the solution phase to the first crystalline phase, are straightforwardly observed using this experimental strategy. Importantly, the NMR sensitivity enhancement provided by DNP allows the detection of intermediate phases that would not be observable using standard solid-state NMR experiments. Our results also show that the metastable β polymorph of glycine, which has only transient existence under bulk crystallization conditions, remains trapped within the pores of the mesoporous SBA-15 silica material for more than 200 days.

Calcite Nanocrystals Investigated Using X-ray Absorption Spectroscopy

For the present work, calcite nanocrystals were grown by annealing precursors at 500 °C. These precursors were obtained by three different thermal schemes. Among these schemes, two involve heating at 100 °C for 16 h and 16 + 24 h, respectively. In the third scheme, heating was performed at 100 °C for 16 h, followed by annealing at 300 °C for 24 h. X-ray diffraction studies, followed by Fourier transform infrared and Raman spectroscopic studies, exhibited the formation of calcite phase of calcium carbonate. Transmission electron microscopy showed that particle sizes of synthesized calcite nanocrystals were in the range of 25–40 nm. Onsets of shape change were also observed with different thermal schemes, using these measurements. X-ray absorption spectroscopy envisaged that the coordination numbers of Ca-O and Ca-Ca shell were not influenced by the thermal schemes; however, bond lengths of these shells were modified. This study in the near edge region evidenced the manifestation of a local electronic structure of calcite when kept in an open environment, depending upon different thermal schemes.

Single-Crystal Lattice Filling in Connected Spaces inside 3D Networks

Connected vessel effects have been widely utilized from ancient times. It is quite interesting to know whether there are any special effects when single-crystal lattices fill the connected spaces inside 3D networks. In some single-crystal and 3D network pairs, there seems to exist a specific rule: when single-crystal lattices fill the connected spaces inside 3D networks, the front of the lattice in each channel is determined by the symmetrical center of the lattice structure. However, this needs to be validated by using various single-crystal lattice to fill the 3D networks with different compositions. Here we report a method to establish a gradient environment which can favor the formation of a micrometer-sized single crystal lattice across various 3D networks. The fronts of the filled lattices form the shapes which are the equilibrium shapes of the single crystals no matter what the single crystals or the 3D networks are, indicating the specific rule while the single-crystal lattices fill the 3D networks. The single crystals filled in the connected spaces inside 3D networks, which are functional materials, and had alternating properties, such as 4-fold higher electronic conductivity, which improve their performance in applications.

Bio-mineralisation, characterization, and stability of calcium carbonate containing organic matter

The composition of organic matter in biogenic calcium carbonate has long been a mystery, and its role has not received sufficient attention. This study is aimed at elucidating the bio-mineralisation and stability of amorphous calcium carbonate (ACC) and vaterite containing organic matter, as induced by Bacillus subtilis. The results showed that the bacteria could induce various structural forms of CaCO3, such as biogenic ACC (BACC) or biogenic vaterite (BV), using the bacterial cells as their template, and the carbonic anhydrase secreted by the bacteria plays an important role in the mineralisation of CaCO3. The effects of Ca2+ concentration on the crystal structure of CaCO3 were ascertained; when the amount of CaCl2 increased from 0.1% (m/v) to 0.8% (m/v), the ACC was transformed to polycrystalline vaterite. The XRD results demonstrated that the ACC and vaterite have good stability in air or deionised water for one year, or even when heated to 200 °C or 300 °C for 2 h. Moreover, the FTIR results indicated that the BACC or BV is rich in organic matter, and the contents of organic matter in biogenic ACC and vaterite are 39.67 wt% and 28.47 wt%, respectively. The results of bio-mimetic mineralisation experiments suggest that the protein secreted by bacterial metabolism may be inclined to inhibit the formation of calcite, while polysaccharide may be inclined to promote the formation of vaterite. Our findings advance our knowledge of the CaCO3 family and are valuable for future research into organic-CaCO3 complexes.

Analysis of small microplastics in coastal surface water samples of the subtropical island of Okinawa, Japan

Marine plastic debris is widely recognized as a global environmental issue. Small microplastic particles, with an upper size limit of 20 μm, have been identified as having the highest potential for causing damage to marine ecosystems. Having accurate methods for quantifying the abundance of such particles in a natural environment is essential for defining the extent of the problem they pose. Using an optical micro-Raman tweezers setup, we have identified the composition of particles trapped in marine aggregates collected from the coastal surface waters around the subtropical island of Okinawa. Chemical composition analysis at the single-particle level indicates dominance by low-density polyethylene, which accounted for 75% of the small microplastics analysed. The smallest microplastics identified were (2.53 ± 0.85) μm polystyrene. Our results show the occurrence of plastics at all test sites, with the highest concentration in areas with high human activities. We also observed additional Raman peaks on the plastics spectrum with decreasing debris size which could be related to structural modification due to weathering or embedding in organic matter. By identifying small microplastics at the single-particle level, we obtain some indication on their dispersion in the ocean which could be useful for future studies on their potential impact on marine biodiversity.

1,1′-Ferrocenedicarboxylic acid/tetrahydrofuran induced precipitation of calcium carbonate with a multi-level structure in water

Multi-molecules co-regulate the orderly morphology and structure of CaCO3 precipitates and the influence of ether bonds on the formation of CaCO3 precipitates.

Biomineralization at fluid interfaces

Biomineralization is of paramount importance for life on Earth. The delicate balance of physicochemical interactions at the interface between organic and inorganic matter during all stages of biomineralization resembles an extremely high complexity. The coordination of this sophisticated biological machinery and physicochemical scenarios is certainly a wonderful show of nature. Understanding of the biomineralization processes is still far from complete. The recent advances in biomineralization research from the Colloid and Interface Science perspective are reviewed herein. The synergy between this two fields of research is demonstrated. The unique opportunities offered by purposefully designed fluid interfaces, mainly Langmuir monolayers are presented. Biomedical applications of biomineral-based nanostructures are discussed, showing their improved biocompatibility and on-demand delivery features. A brief guide to the array of state-of-the-art experimental techniques for unraveling the mechanisms of biomineralization using fluid interfaces is included. In summary, the fruitful and exciting crossroad between Colloid and Interface Science with Biomineralization is exhibited.

Biomineral armor in leaf-cutter ants

Although calcareous anatomical structures have evolved in diverse animal groups, such structures have been unknown in insects. Here, we report the discovery of high-magnesium calcite [CaMg(CO₃)₂] armor overlaying the exoskeletons of major workers of the leaf-cutter ant Acromyrmex echinatior. Live-rearing and in vitro synthesis experiments indicate that the biomineral layer accumulates rapidly as ant workers mature, that the layer is continuously distributed, covering nearly the entire integument, and that the ant epicuticle catalyzes biomineral nucleation and growth. In situ nanoindentation demonstrates that the biomineral layer significantly hardens the exoskeleton. Increased survival of ant workers with biomineralized exoskeletons during aggressive encounters with other ants and reduced infection by entomopathogenic fungi demonstrate the protective role of the biomineral layer. The discovery of biogenic high-magnesium calcite in the relatively well-studied leaf-cutting ants suggests that calcareous biominerals enriched in magnesium may be more common in metazoans than previously recognized.

Biomineral armour is known in a number of diverse creatures but has not previously been observed in insects. Here, the authors report on the discovery and characterization of high-magnesium calcite armour which overlays the exoskeletons of leaf-cutter ants.

Bio-inspired mineral fluorescent hydrogels cross-linked by amorphous rare earth carbonates

The bio-inspired mineral plastic hydrogel based on calcium carbonate and polyacrylic acid has been recently investigated as a promising sustainable material. Here we report that rare earth carbonates can act as cross-linkers to fabricate analogous hydrogels and provide remarkable optical properties.

Non-destructive characterization of physical and chemical clogging in cylindrical drip emitters

Characteristics and deposition pattern of clogging material on cylindrical drip emitters was studied using non-destructive methods of evaluation. Two sets of four cylindrical emitter samples were collected from farm lands. One set of sample emitters was analyzed using Computed Tomography (CT). Other set was dissected and the clogging material extracted was analyzed using Energy Dispersive X-Ray Fluorescence (EDXRF) and X-Ray Diffraction (XRD). CT scans revealed the geometric properties of emitters and the spread of clogging material on the emitter surface. EDXRF analysis found statistically significant inverse relationship between the proportion of physical clogging and chemical clogging materials. XRD analysis indicated presence of physical and chemical clogging materials in their crystalline forms. Emitters having transverse flow path and the boundary optimized with curvature found with the least deposition of physical clogging materials. Corresponding proportion of chemical clogging (as Ca) was found to be much higher. All the samples were found with more clogging material closer to the outlets. Efforts to optimize emitter geometry shall also take into account the outlet area optimization and chemical clogging for obtaining best results.

Multipodal mesoporous silica hollow spheres: Branched hierarchical nanostructure by region-selective self-assembly

HYPOTHESIS

Hollow nanostructures, known as nanocapsules, have been the preferable candidates in the drug-delivery and control-release applications. To enhance the adherence and penetration into biological hosts for efficient drug delivery, constructing multiple pods on the hollow structure to form a tribulus-like branched architecture has been proven an effective strategy. However, the synthesis is challenging due to the simultaneous control of the branched podal morphology, the hollow architecture and the mesophase structures at the nanometer scale.

EXPERIMENTS

Polymer spheres with surface carboxyl moieties were first prepared by emulsion polymerization, which were partly coated by a type of basic silane. The left carboxyl moieties formed some seperated acid spots on the surface of polymer spheres, which could lead to the subsequent self-assembly of surfactant and silica within these acidic spots to grow a branched nanostructure.

FINDINGS

Radiolarian-like organic-inorganic hybrid hollow architecture with branched ordered mesoporous pods were obtained after removing the organic templates of the polymer spheres and surfactants by calcination. The ordered cylindrical mesoporous channels were along the central axis direction of the hexagonal-prism-like pods, which connected inside and outside of the hollow spheres. The number of the branched pods could be easily tuned at the range of one to four.

Macrobiomineralogy: Insights and Enigmas in Giant Whale Bones and Perspectives for Bioinspired Materials Science

The giant bones of whales (Cetacea) are the largest extant biomineral-based constructs known. The fact that such mammalian bones can grow up to 7 m long raises questions about differences and similarities to other smaller bones. Size and exposure to environmental stress are good reasons to suppose that an unexplored level of hierarchical organization may be present that is not needed in smaller bones. The existence of such a macroscopic naturally grown structure with poorly described mechanisms for biomineralization is an example of the many yet unexplored phenomena in living organisms. In this article, we describe key observations in macrobiomineralization and suggest that the large scale of biomineralization taking place in selected whale bones implies they may teach us fundamental principles of the chemistry, biology, and biomaterials science governing bone formation, from atomistic to the macrolevel. They are also associated with a very lipid rich environment on those bones. This has implications for bone development and damage sensing that has not yet been fully addressed. We propose that whale bone construction poses extreme requirements for inorganic material storage, mediated by biomacromolecules. Unlike extinct large mammals, cetaceans still live deep in large terrestrial water bodies following eons of adaptation. The nanocomposites from which the bones are made, comprising biomacromolecules and apatite nanocrystals, must therefore be well adapted to create the macroporous hierarchically structured architectures of the bones, with mechanical properties that match the loads imposed in vivo. This massive skeleton directly contributes to the survival of these largest mammals in the aquatic environments of Earth, with structural refinements being the result of 60 million years of evolution. We also believe that the concepts presented in this article highlight the beneficial uses of multidisciplinary and multiscale approaches to study the structural peculiarities of both organic and inorganic phases as well as mechanisms of biomineralization in highly specialized and evolutionarily conserved hard tissues.

The Crystallization Process of Vaterite Microdisc Mesocrystals via Proto-Vaterite Amorphous Calcium Carbonate Characterized by Cryo-X-ray Absorption Spectroscopy

Investigation on the formation mechanism of crystals via amorphous precursors has attracted a lot of interests in the last years. The formation mechanism of thermodynamically meta-stable vaterite in pure alcohols in the absence of any additive is less known. Herein, the crystallization process of vaterite microdisc mesocrystals via proto-vaterite amorphous calcium carbonate (ACC) in isopropanol was tracked by using Ca K-edge X-ray absorption spectroscopy (XAS) characterization under cryo-condition. Ca K-edge X-ray absorption near edge structure (XANES) spectra show that the absorption edges of the Ca ions of the vaterite samples with different crystallization times shift to lower photoelectron energy while increasing the crystallization times from 0.5 to 20 d, indicating the increase of crystallinity degree of calcium carbonate. Ca K-edge extended X-ray absorption fine structure (EXAFS) spectra exhibit that the coordination number of the nearest neighbor atom O around Ca increases slowly with the increase of crystallization time and tends to be stable as 4.3 (±1.4). Crystallization time dependent XANES and EXAFS analyses indicate that short-range ordered structure in proto-vaterite ACC gradually transform to long-range ordered structure in vaterite microdisc mesocrystals via a non-classical crystallization mechanism.

Characterisation of CaCO3 phases during strain-specific ureolytic precipitation

Numerous microbial species can selectively precipitate mineral carbonates with enhanced mechanical properties, however, understanding exactly how they achieve this control represents a major challenge in the field of biomineralisation. We have studied microbial induced calcium carbonate (CaCO₃) precipitation (MICP) in three ureolytic bacterial strains from the Sporosarcina family, including S. newyorkensis, a newly isolated microbe from the deep sea. We find that the interplay between structural water and strain-specific amino acid groups is fundamental to the stabilisation of vaterite and that, under the same conditions, different isolates yield distinctly different polymorphs. The latter is found to be associated with different urease activities and, consequently, precipitation kinetics, which change depending on pressure-temperature conditions. Further, CaCO₃ polymorph selection also depends on the coupled effect of chemical treatment and initial bacterial concentrations. Our findings provide new insights into strain-specific CaCO₃ polymorphic selection and stabilisation, and open up promising avenues for designing bio-reinforced geo-materials that capitalise on the different particle bond mechanical properties offered by different polymorphs.

Corrosion of Heritage Objects: Collagen-Like Triple Helix Found in the Calcium Acetate Hemihydrate Crystal Structure

Helical motifs are common in nature, for example, the DNA double or the collagen triple helix. In the latter proteins, the helical motif originates from glycine, the smallest amino acid, whose molecular confirmation is closely related to acetic acid. The combination of acetic acid with calcium and water, which are also omnipresent in nature, materializing as calcium acetate hemihydrate, was now revealed to exhibit a collagen‐like triple helix structure. This calcium salt is observed as efflorescence phase on calcareous heritage objects, like historic Mollusca shells, pottery or marble reliefs. In a model experiment pure calcium acetate hemihydrate was crystallized on the surface of a terracotta vessel. Calcium acetate hemihydrate crystallizes in a surprisingly large unit cell with a volume of 11,794.5(3) ų at ambient conditions. Acetate ions bridge neighboring calcium cations forming spiral chains, which are arranged in a triple helix motif.

Mechanism Study of Molecular Deformation of 2,2',5',2″-Tetramethylated p-Terphenyl-4,4″-dithiol Trapped in Gold Junctions

Molecular junctions hold great potential for future microelectronics, while the practical utilization has long been limited by the problem of conformational deformation during charge transport. Here we present a first-principles theoretical study on the surface-enhanced Raman spectroscopy (SERS) characterization of the p-terphenyl-4,4″-dithiol molecule and its 2,2',5',2″-tetramethylated analogue in gold junctions to investigate the molecular deformation mechanism. The effects of charge injection and external electric field were examined, both of which could change π-conjugation by varying the dihedral angle between the central and ending rings (D_IPT). The induced significant structural deformations then change SERS responses. Only the SERS responses under an external electric field can account for the experimentally observed Raman spectra, and those of charge injections cannot. Moreover, applying a strong electric field could enlarge the conductivities of the two molecular junctions, agreeing well with experiments. This information not only elaborates that the electric field effect constitutes one important mechanism for molecular deformation but also provides useful insights for the control of charge transport in molecular junctions.

Calcium cyclic carboxylates as structural models for calcium carbonate scale inhibitors

Calcium complexes of cyclic oligocarboxylic acids have been studied as models to understand how subtle changes in molecular structure lead to significant variation in inhibition ability for calcium carbonate deposition

Structural evolution of amorphous calcium sulfate nanoparticles into crystalline gypsum phase

Growth and orientation of nanocrystalline domains within fused ACS particles generate monocrystalline gypsum phase.

Coral acid rich protein selects vaterite polymorph in vitro

Corals and other biomineralizing organisms use proteins and other molecules to form different crystalline polymorphs and biomineral structures. In corals, it’s been suggested that proteins such as Coral Acid Rich Proteins (CARPs) play a major role in the polymorph selection of their calcium carbonate (CaCO₃) aragonite exoskeleton. To date, four CARPs (1–4) have been characterized: each with a different amino acid composition and different temporal and spatial expression patterns during coral developmental stages. Interestingly, CARP3 is able to alter crystallization pathways in vitro, yet its function in this process remains enigmatic. To better understand the CARP3 function, we performed two independent in vitro CaCO₃ polymorph selection experiments using purified recombinant CARP3 at different concentrations and at low or zero Mg²⁺ concentration. Our results show that, in the absence of Mg²⁺, CARP3 selects for the vaterite polymorph and inhibits calcite. However, in the presence of a low concentration of Mg²⁺ and CARP3 both Mg-calcite and vaterite are formed, with the relative amount of Mg-calcite increasing with CARP3 concentration. In all conditions, CARP3 did not select for the aragonite polymorph, which is the polymorph associated to CARP3 in vivo, even in the presence of Mg²⁺ (Mg:Ca molar ratio equal to 1). These results further emphasize the importance of Mg:Ca molar ratios similar to that in seawater (Mg:Ca equal to 5) and the activity of the biological system in a aragonite polymorph selection in coral skeleton formation.

Carbonate doped Bi2MoO6 hierarchical nanostructure with enhanced transformation of active radicals for efficient photocatalytic removal of NO

Doping heteroatoms in photocatalyst is an effective strategy to signally enhance the photocatalytic activity. Herein, we have favorably fabricated the carbonate doped Bi₂MoO₆ via a facile one-pot solvothermal method, which was verified by structure and constituent characterization analysis. In addition, the NO removal efficiency of carbonate-intercalated Bi₂MoO₆ is ~34%, far-exceeding that of the pure Bi₂MoO₆ (~13%), whilst exhibits a good stability and durability, owing to that the dopants could modulate the electron states of the Bi₂MoO₆, thus stimulating charge separation and migration, incenting transformation of reactive oxygen species and facilitating reactants activation, which are synthetically investigated by experimental characterization coupled with DFT calculation. Significantly, the in situ DRIFTS measurement was employed to dynamic monitor the NO oxidation process and clarify the photocatalytic mechanism under visible light irradiation. This work provides an efficient strategy to design photocatalysts with tunable motivating charge conversion and reactants activation towards NO photooxidation.

Water: How Does It Influence the CaCO3 Formation?

Nature produces biomineral-based materials with a fascinating set of properties using only a limited number of elements. This set of properties is obtained by closely controlling the structure and local composition of the biominerals. We are far from achieving the same degree of control over the properties of synthetic biomineral-based composites. One reason for this inferior control is our incomplete understanding of the influence of the synthesis conditions and additives on the structure and composition of the forming biominerals. In this Review, we provide an overview of the current understanding of the influence of synthesis conditions and additives during different formation stages of CaCO₃ , one of the most abundant biominerals, on the structure, composition, and properties of the resulting CaCO₃ crystals. In addition, we summarize currently known means to tune these parameters. Throughout the Review, we put special emphasis on the role of water in mediating the formation of CaCO₃ and thereby influencing its structure and properties, an often overlooked aspect that is of high relevance.

Non-stoichiometric hydrated magnesium-doped calcium carbonate precipitation in ethanol

The effect of Mg2+ on the precipitation pathway of CaCO3 in absolute ethanol has been studied to investigate the role of ion solvation in the crystallization process. Our data reveal that high concentrations of Mg2+ promote the precipitation of an amorphous transient phase together with non-stoichometric hydrated phases of calcium carbonate.

The long-term stability of calcium arsenates: Implications for phase transformation and arsenic mobilization

It is well known that calcium arsenates may not be a good choice for arsenic removal and immobilization in hydrometallurgical practices. However, they are still produced at some plants in the world due to various reasons. Furthermore, calcium arsenates can also naturally precipitate under some specific environments. However, the transformation process of poorly crystalline calcium arsenates (PCCA) and the stability of these samples under atmospheric CO₂ are not yet well understood. This work investigated the transformation process of PCCA produced by using different neutralization reagents (CaO vs. NaOH) with various Ca/As molar ratios at pH 7-12 in the presence of atmospheric CO₂. After aging at room temperature for a period of time, for samples neutralized with NaOH and precipitated at pH 10 and 12, release of arsenic back into the liquid phase occurred. In contrast, for the samples precipitated at pH 8, the aqueous concentration of arsenic was observed to decrease. XRD, Raman, and SEM results suggested that the formation of various types of crystalline calcium carbonates and/or calcium arsenates controls the arsenic behavior. Moreover, the application of lime may enhance the stability of the generated PCCA. However, no matter what neutralization reagent is used, the stability of the generated PCCA is still of concern.

In vitro and in vivo studies on magnesium alloys to evaluate the feasibility of their use in obstetrics and gynecology

Magnesium and its alloys were widely investigated in many body fluid microenvironments including bone, blood, bile, saliva, and urine; however, no study has been conducted in the intrauterine microenvironment. In this study, the degradation behaviors of HP-Mg, Mg-1Ca, and Mg-2Zn alloys in simulated uterine fluid (SUF) were systematically investigated, and then the biological response of four kinds of uterine cells to these materials was observed. For this purpose, the gluteal muscle of rat was used as the implantation position to study the in vivo biocompatibility as a mimic of the intrauterine device (IUD) fixation part. The 120-day immersion test indicated that the Mg-1Ca alloy had a faster degradation rate than the Mg-2Zn alloy and HP-Mg and dissolved entirely in the SUF. Indirect cytotoxicity assay showed that the extracts of HP-Mg, Mg-1Ca, and Mg-2Zn alloys have positive effects on human uterine smooth muscle cells (HUSMC), human endometrial epithelial cells (HEEC), and human endometrial stromal cells (HESC), especially for the Mg-1Ca alloy group. Furthermore, the in vivo experiment showed that HP-Mg, Mg-1Ca, and Mg-2Zn alloy implants cause a light inflammatory response in the initial 3 days, but they were surrounded mainly by connective tissue, and lymphocytes were rarely observed at 4 weeks. Based on the above facts, we believed that it is feasible for using biomedical Mg alloys in obstetrics and gynecology and proposed three kinds of medical device candidates for future R&D. Statement of Significance Magnesium alloys were widely investigated in various body microenvironments including bone, blood, bile, saliva, and urine; however, no study has been conducted in the intrauterine environment. In this work, the degradation behaviors of Mg alloys in simulated uterine fluid were systematically investigated, and then the biological response of four kinds of uterine cells to these materials was observed. For this purpose, the tibialis anterior of a rat model was used as the implantation position to study the in vivo biocompatibility. The comprehensive in vitro and in vivo testing results indicated that biomedical Mg alloys are feasible for use in obstetrics and gynecology. Further, three kinds of medical device candidates were proposed.

3D Electron Diffraction: The Nanocrystallography Revolution

Crystallography of nanocrystalline materials has witnessed a true revolution in the past 10 years, thanks to the introduction of protocols for 3D acquisition and analysis of electron diffraction data. This method provides single-crystal data of structure solution and refinement quality, allowing the atomic structure determination of those materials that remained hitherto unknown because of their limited crystallinity. Several experimental protocols exist, which share the common idea of sampling a sequence of diffraction patterns while the crystal is tilted around a noncrystallographic axis, namely, the goniometer axis of the transmission electron microscope sample stage. This Outlook reviews most important 3D electron diffraction applications for different kinds of samples and problematics, related with both materials and life sciences. Structure refinement including dynamical scattering is also briefly discussed.

Automated electron diffraction tomography - development and applications

Electron diffraction tomography (EDT) has gained increasing interest, starting with the development of automated electron diffraction tomography (ADT) which enables the collection of three-dimensional electron diffraction data from nano-sized crystals suitable for ab initio structure analysis. A basic description of the ADT method, nowadays recognized as a reliable and established method, as well as its special features and general applicability to different transmission electron microscopes is provided. In addition, the usability of ADT for crystal structure analysis of single nano-sized crystals with and without special crystallographic features, such as twinning, modulations and disorder is demonstrated.

Formation of stable strontium-rich amorphous calcium phosphate: Possible effects on bone mineral

Bone, tooth enamel, and dentin accumulate Sr²⁺, a natural trace element in the human body. Sr²⁺ comes from dietary and environmental sources and is thought to play a key role in osteoporosis treatments. However, the underlying impacts of Sr²⁺on bone mineralization remain unclear and the use of synthetic apatites (which are structurally different from bone mineral) and non-physiological conditions have led to contradictory results. Here, we report on the formation of a new Sr²⁺-rich and stable amorphous calcium phosphate phase, Sr(ACP). Relying on a bioinspired pathway, a series of Sr²⁺ substituted hydroxyapatite (HA) that combines the major bone mineral features is depicted as model to investigate how this phase forms and Sr²⁺ affects bone. In addition, by means of a comprehensive investigation the biomineralization pathway of Sr²⁺ bearing HA is described showing that not more than 10 at% of Sr²⁺, i.e. a physiological limit incorporated in bone, can be incorporated into HA without phase segregation. A combination of ³¹P and ¹H solid state NMR, energy electron loss spectromicroscopy, transmission electron microscopy, electron diffraction, and Raman spectroscopy shows that Sr²⁺ introduces disorder in the HA culminating with the unexpected Sr(ACP), which co-exists with the HA under physiological conditions. These results suggest that heterogeneous Sr²⁺ distribution in bone is associated with regions of low structural organization. Going further, such observations give clues from the physicochemical standpoint to understand the defects in bone formation induced by high Sr²⁺ doses. STATEMENT OF SIGNIFICANCE: Understanding the role played by Sr²⁺ has a relevant impact in physiological biomineralization and provides insights for its use as osteoporosis treatments. Previous studies inspired by the bone remodelling pathway led to the formation of biomimetic HA in terms of composition, structures and properties in water. Herein, by investigating different atomic percentage of Sr²⁺ related to Ca²⁺ in the synthesis, we demonstrate that 10% of Sr²⁺ is the critical loads into the biomimetic HA phase; similarly to bone. Unexpectedly, using higher amount leads to the formation of a stable Sr²⁺-rich amorphous calcium phosphate phase that may high-dose related pathologies. Our results provide further understanding of the different ways Sr²⁺ impacts bone.

Calcium Carbonate Mineralization in a Surface-Tension-Confined Droplets Array

Calcium carbonate biomimetic crystallization remains a topic of interest with respect to biomineralization areas in recent research. It is not easy to conduct high-throughput experiments with only a few macromolecule reagents using conventional experimental methods. However, the emergence of microdroplet array technology provides the possibility to solve these issues efficiently. In this article, surface-tension-confined droplet arrays were used to fabricate calcium carbonate. It was found that calcium carbonate crystallization can be conducted in surface-tension-confined droplets. Defects were found on the surface of some crystals, which were caused by liquid flow inside the droplet and the rapid drop in droplet height during the evaporation. The diameter and number of crystals were related to the droplet diameter. Polyacrylic acid (PAA), added as a modified organic molecule control, changed the CaCO3 morphology from calcite to vaterite. The material products of the above experiments were compared with bulk-synthesized calcium carbonate by scanning electron microscopy (SEM), Raman spectroscopy and other characterization methods. Our work proves the possibility of performing biomimetic crystallization and biomineralization experiments on surface-tension-confined microdroplet arrays.