Streptococcus-Escherichia coli shuttle vector pSA3 and its use in the cloning of streptococcal genes

Cloning and analysis of the restriction-modification system LlaBI, a bacteriophage resistance system from Lactococcus lactis subsp. cremoris W56

The genes coding for the type II restriction-modification (R/M) system LlaBI, which recognized the sequence 5'-C decreases TRYAG-3', have been cloned from a plasmid in Lactococcus lactis subsp. cremoris W56 and sequenced. The DNA sequence predicts an endonuclease of 299 amino acids (33 kDa) and a methylase of 580 amino acids (65 kDa). A 4.0-kb HindIII fragment in pSA3 was able to restrict bacteriophages, showing that the cloned R/M system can function as a phage defense mechanism in L. lactis.

Identification and characterization of the eps (Exopolysaccharide) gene cluster from Streptococcus thermophilus Sfi6

We report the identification and characterization of the eps gene cluster of Streptococcus thermophilus Sfi6 required for exopolysaccharide (EPS) synthesis. This report is the first genetic work concerning EPS production in a food microorganism. The EPS secreted by this strain consists of the following tetrasaccharide repeating unit:-->3)-beta-D-Galp-(1-->3)-[alpha-D-Galp-(1-->6)]-beta-D- D-Galp-(1-->3)-alpha-D-Galp-D-GalpNAc-(1-->. The genetic locus The genetic locus was identified by Tn916 mutagenesis in combination with a plate assay to identify Eps mutants. Sequence analysis of the gene region, which was obtained from subclones of a genomic library of Sfi6, revealed a 15.25-kb region encoding 15 open reading frames. EPS expression in the non-EPS-producing heterologous host, Lactococcus lactis MG1363, showed that within the 15.25-kb region, a region with a size of 14.52 kb encoding the 13 genes epsA to epsM was capable of directing EPS synthesis and secretion in this host. Homology searches of the predicted proteins in the Swiss-Prot database revealed high homology (40 to 68% identity) for epsA, B, C, D, and E and the genes involved in capsule synthesis in Streptococcus pneumoniae and Streptococcus agalactiae. Moderate to low homology (37 to 18% identity) was detected for epsB, D, F, and H and the genes involved in capsule synthesis in Staphylococcus aureus for epsC, D, and E and the genes involved in exopolysaccharide I (EPSI) synthesis in Rhizobium meliloti for epsC to epsJ and the genes involved in lipopolysaccharide synthesis in members of the Enterobacteriaceae, and finally for eps K and lipB of Neisseria meningitidis. Genes (epsJ, epsL, and epsM) for which the predicted proteins showed little or no homology with proteins in the Swiss-Prot database were shown to be involved in EPS synthesis by single-crossover gene disruption experiments.

Sequencing, distribution, and inactivation of the dipeptidase A gene (pepDA) from Lactobacillus helveticus CNRZ32

Previously, the gene for a general dipeptidase (pepDA) was isolated from a gene bank of Lactobacillus helveticus CNRZ32. The pepDA gene consists of a 1,422-bp open reading frame which could encode a polypeptide of 53.5 kDa. No significant identity was found between the deduced amino acid sequence of the pepDA product and the sequence for other polypeptides reported in GenBank. Southern hybridization studies with a pepDA probe indicated that the nucleotide sequence for pepDA is not well conserved among a variety of lactic acid bacteria. Growth studies indicated that a pepDA deletion had no detectable effect on growth rate or acid production by L. helveticus CNRZ32 in milk. Furthermore, no difference in total cellular dipeptidase activity was detected between the mutant and wild-type strains during logarithmic growth in MRS medium.

Development of an expression strategy using a lytic phage to trigger explosive plasmid amplification and gene expression

A novel plasmid-based expression strategy, exploiting two features of lytic bacteriophages, was developed in Lactococcus lactis. Components of this system include a phage origin of replication and phage expression signals, which were induced to high efficiency upon phage infection of the host. Phage-specific expression signals were cloned from phi 31 in a promoter-screening strategy using the lacZ gene from Streptococcus thermophilus. One clone exhibited a significant induction in beta-galactosidase production and concomitant increase in lacZ mRNA during the phi 31 infection cycle of the host. Molecular characterization of the cloned insert revealed 888 bp positioned near the phi 31 cos site. Primer extension analysis showed that transcription was induced approximately 20 min following phi 31 infection at four points, apparently organized in two sets of tandem promoters on the cloned phage insert. One of these middle phage promoters also showed a basal level of activity prior to phage infection. The phi 31 promoter lacZ cassette was cloned into a low-copy-number vector plasmid containing the phi 31 origin of replication (ori31) and the resulting low-copy-number plasmid exhibited negligible beta-galactosidase production in L. lactis. However, > 2,000 units were detected following a deliberate infection with phi 31. A control expression plasmid without ori31 could only be induced to 85 units. The combination of these phage-inducible expression signals together with ori31 functioned synergistically to drive rapid and high efficiency expression of a heterologous gene in L. lactis.

Sequencing and analysis of the prolate-headed lactococcal bacteriophage c2 genome and identification of the structural genes

The 22,163-bp genome of the lactococcal prolate-headed phage c2 was sequenced. Thirty-nine open reading frames (ORFs), early and late promoters, and a putative transcription terminator were identified. Twenty-two ORFs were in the early gene region, and 17 were in the late gene region. Putative genes for a DNA polymerase, a recombination protein, a sigma factor protein, a transcription regulatory protein, holin proteins, and a terminase were identified. Transcription of the early and late genes proceeded divergently from a noncoding 611-bp region. A 521-bp fragment contained within the 611-bp intergenic region could act as an origin of replication in Lactococcus lactis. Three major structural proteins, with sizes of 175, 90, and 29 kDa, and eight minor proteins, with sizes of 143, 82, 66, 60, 44, 42, 32, and 28 kDa, were identified. Several of these proteins appeared to be posttranslationally modified by proteolytic cleavage. The 175- and 90-kDa proteins were identified as the major phage head proteins, and the 29- and 60-kDa proteins were identified as the major tail protein and (possibly) the tail adsorption protein, respectively. The head proteins appeared to be covalently linked multimers of the same 30-kDa gene product. Phage c2 and prolate-headed lactococcal phage bIL67 (C. Schouler, S. D. Ehrlich, and M.-C. Chopin, Microbiology 140:3061-3069, 1994) shared 80% nucleotide sequence identity. However, several DNA deletions or insertions which corresponded to the loss or acquisition of specific ORFs, respectively, were noted. The identification of direct nucleotide repeats flanking these sequences indicated that recombination may be important in the evolution of these phages.(ABSTRACT TRUNCATED AT 250 WORDS)

Cloning and sequencing of LlaDCHI [corrected] restriction/modification genes from Lactococcus lactis and relatedness of this system to the Streptococcus pneumoniae DpnII system

The natural 7.8-kb plasmid pSRQ700 was isolated from Lactococcus lactis subsp. cremoris DCH-4. It encodes a restriction/modification system named LlaDCHI [corrected]. When introduced into a phage-sensitive L. lactis strain, pSRQ700 confers strong phage resistance against the three most common lactococcal phage species, namely, 936, c2, and P335. The LlaDCHI [corrected] endonuclease was purified and found to cleave the palindromic sequence 5'-GATC-3'. It is an isoschizomer of Streptococcus pneumoniae DpnII. The plasmid pSRQ700 was mapped, and the genetic organization of LlaDCHI [corrected] was localized. Cloning and sequencing of the entire LlaDCHI [corrected] system allowed the identification of three open reading frames. The three genes (llaIIA, llaIIB, and llaIIC) overlapped and are under one putative promoter. A putative terminator was found at the end of llaIIC. The genes llaIIA and llaIIB coded for m6A methyltransferases, and llaIIC coded for an endonuclease. The LlaDCHI [corrected] system shares strong genetic similarities with the DpnII system. The deduced amino acid sequence of M.LlaIIA was 75% identical with that of M.DpnII, whereas M.LlaIIB was 88% identical with M.DpnA. However, R.LlalII shared only 31% identity with R.DpnII.

Cloning and characterization of the abortive infection genetic determinant abiD isolated from pBF61 of Lactococcus lactis subsp. lactis KR5

A 6.3-kb fragment from pBF61 in Lactococcus lactis subsp. lactis KR5 was cloned and found to confer an abortive phage infection (Abi+) phenotype exhibiting a reduction in efficiency of plating and plaque size for small isometric- and prolate-headed bacteriophages sk1 and c2, respectively, and to produce a 10-fold decrease in c2 phage burst size. Phage adsorption was not significantly reduced. An open reading frame of 1,098 bp was sequenced and designated abiD. Tn5 mutagenesis confirmed that abiD was required for the Abi+ phenotype.

pUCL287 plasmid from Tetragenococcus halophila (Pediococcus halophilus) ATCC 33315 represents a new theta-type replicon family of lactic acid bacteria

A cryptic plasmid, pUCL287, was isolated from Tetragenococcus halophila (Pediococcus halophilus) ATCC 33315. It had a theta-type mechanism of replication in its natural host. Its minimal replicon, Rep287, was isolated on a 1.6-kb EcoRI fragment. The Rep287 host range included the genera Pediococcus, Enterococcus, Lactobacillus and Leuconostoc but not genus Lactococcus. Plasmids hybridizing to pUCL287 are rare among lactic acid bacteria. As assessed by hybridization, Rep287 is dissimilar to pAM beta 1, pIP501 and pUCL22, representatives of the most common theta-type replicon groups in Gram-positive bacteria. Therefore, pUCL287 appears to represent a new theta-type replicon family from lactic acid bacteria.

Characterization of an erythromycin resistance (erm) plasmid in Streptococcus pyogenes

Three erythromyxin-resistant Swedish isolates of Streptococcus pyogenes, representing different T-types, were studied. Two of the strains showed constitutive high-level (MIC > 200 micrograms/ml) and one showed moderate (MIC 6.4 micrograms/ml) resistance; the latter strain was sensitive to lincosamide and clindamycin, and resistance was not induced by erythromycin. In each of the strains, a plasmid with an estimated Mw of 17.6 +/- 0.9 x 10(6) was isolated in addition to smaller cryptic plasmids. The three plasmids pSE701, pSE702, and pSE703 had very similar restriction enzyme cleavage patterns. Novobiocin curing of the high-level resistance strain ER559 showed the resistance to be linked to its 17.6 x 10(6) plasmid, pSE703. Furthermore, by electroporation this rather large plasmid was reintroduced into an erythromycin-sensitive cured derivative, acquiring resistance, and the plasmid was again recovered from the transconjugant. One of the plasmids, pSE702, was shown by filter mating to be conjugative within S. pyogenes. DNA-DNA hybridization showed that the resistance determinant of the present three isolates was related to the erm gene on plasmid pAM beta 1 of Enterococcus faecalis but not to that of plasmid pE194 of Staphylococcus aureus. The copy numbers of pSE702 and pSE703, derived from the two high-level resistant strains, were 11 +/- 3 and 17 +/- 5 compared to 2 +/- 1 for pSE701, derived from the moderately resistant strain, possibly accounting for the phenotypic variation observed. The plasmids pSE702 and pAM beta 1 showed about 80% homology in DNA-DNA hybridization tests and high similarity in their restriction maps.

Sequencing and analysis of the cos region of the lactococcal bacteriophage c2

The cohesive termini of the DNA genome of the lactococcal bacteriophage c2 were directly sequenced and appeared to be complementary, non-symmetrical, 9-nucleotide single-stranded, 3' extended DNAs, with the following sequence: 5'-GTTAGGCTT-3' 3'-CAATCCGAA-5'. DNA located on either side of the cohesive ends was sequenced and several repeats and a region with the potential for a DNA bend were found. Previously sequenced cos regions of 13 other bacteriophages were also examined for similar sequence features. All of the bacteriophages from gram-positive hosts had 3' extended DNA termini, in contrast to the bacteriophages from gram-negative hosts, which had 5' extended DNA termini. All bacteriophages had a region of dyad symmetry close to the cohesive termini. A 7.3 kb DNA fragment of the c2 genome containing the cos sequences was cloned; transduction experiments demonstrated that these cloned sequences could act as a substrate for packaging enzymes of phage c2.

Isolation of a novel IS3 group insertion element and construction of an integration vector for Lactobacillus spp

An insertion sequence (IS) element from Lactobacillus johnsonii was isolated, characterized, and exploited to construct an IS-based integration vector. L. johnsonii NCK61, a high-frequency conjugal donor of bacteriocin production (Laf+) and immunity (Lafr), was transformed to erythromycin resistance (Emr) with the shuttle vector pSA3. The NCK61 conjugative functions were used to mobilize pSA3 into a Laf- Lafs EMs recipient. DNA from the Emr transconjugants transformed into Escherichia coli MC1061 yielded a resolution plasmid with the same size as that of pSA3 with a 1.5-kb insertion. The gram-positive replication region of the resolution plasmid was removed to generate a pSA3-based suicide vector (pTRK327) bearing the 1.5-kb insert of Lactobacillus origin. Plasmid pTRK327 inserted randomly into the chromosomes of both Lactobacillus gasseri ATCC 33323 and VPI 11759. No homology was detected between plasmid and total host DNAs, suggesting a Rec-independent insertion. The DNA sequence of the 1.5-kb region revealed the characteristics of an IS element (designated IS1223): a length of 1,492 bp; flanking, 25-bp, imperfect inverted repeats; and two overlapping open reading frames (ORFs). Sequence comparisons revealed 71.1% similarity, including 35.7% identity, between the deduced ORFB protein of the E. coli IS element IS150 and the putative ORFB protein encoded by the Lactobacillus IS element. A putative frameshift site was detected between the overlapping ORFs of the Lactobacillus IS element. It is proposed that, similar to IS150, IS1223 produces an active transposase via translational frameshifting between two tandem, overlapping ORFs.

Cloning, characterization and insertional inactivation of the Lactobacillus helveticus D(-) lactate dehydrogenase gene

A plasmid, designated pSUW100, encoding the D(-)lactate dehydrogenase [D(-)-LDH; NAD+ oxidoreductase, EC 1.1.1.28] from Lactobacillus helveticus CNRZ32 was identified from a genomic library by complementation of Escherichia coli FMJ39. The D(-)LDH gene was localized by Tn5 mutagenesis and subcloning to a 1.4-kb region of pSUW100. A 2-kb DraI fragment of pSUW100 encoding D(-)LDH activity was subcloned and its nucleotide sequence determined. Analysis of this sequence identified a putative 1,014-bp D(-)LDH open reading frame that encodes a polypeptide of 337 amino acid residues with a deduced molecular mass of 38 kDa. The distribution of homology to the CNRZ32 D(-)LDH gene in several lactic acid bacteria was determined by Southern hybridization using an internal fragment of the D(-)LDH gene as a probe. Hybridization was detected in leuconostocs and pediococci but not in lactococci or Lactobacillus casei. An integration plasmid was constructed from pSA3 and a 0.60-kb internal fragment of the D(-)LDH gene. This plasmid was used to construct a D(-)LDH-negative derivative of L. helveticus CNRZ 32 by gene disruption; this derivative was determined as producing only L(+)lactic acid. No significant difference in growth or total lactic acid production was observed between CNRZ32 and its D(-)LDH mutant.

Phenotypic Consequences of Altering the Copy Number of abiA , a Gene Responsible for Aborting Bacteriophage Infections in Lactococcus lactis

The abiA gene (formerly hsp ) encodes an abortive phage infection mechanism which inhibits phage DNA replication. To analyze the effects of varying the abiA gene dosage on bacteriophage resistance in Lactococcus lactis , various genetic constructions were made. An IS 946 -based integration vector, pTRK75, was used to integrate a single copy of abiA into the chromosomes of two lactococcal strains, MG1363 and NCK203. In both strains, a single copy of abiA did not confer any significant phage resistance on the host except for one of the MG1363 integrants, NCK625, which exhibited a slightly higher level of resistance to phages sk1 and p2. Hybridization of the total cellular RNA from NCK625 to an abiA -specific probe indicated that the integration took place downstream of a promoter causing stronger expression of abiA in this integrant. Three abiA -containing plasmids of various copy numbers were introduced into both strains, and the recombinants were evaluated for resistance to phages c2, p2, sk1, and φ31. Plasmid pTRK18 has a copy number of approximately six ( cn = 6) and caused a decreased plaque size for all phages evaluated. Integration of pTRK75 into a native plasmid of NCK203 generated pTRK362 ( cn = 13), which caused a reduced efficiency of plaquing (EOP = 10 -2 ) and reduced plaque size. A high-copy-number abiA plasmid (pTRK363), based on the pAMβ1 origin of replication, was also constructed ( cn = 100). Plasmid pTRK363 caused a significant reduction in EOP (10 -4 to 10 -8 ) and plaque size for all phages tested, although in some cases, this plasmid caused the evolution of AbiA-resistant phage derivatives. Altering the gene dosage or expression level of abiA significantly affects the phage resistance levels.

High- and low-copy-number Lactococcus shuttle cloning vectors with features for clone screening

High- and low-copy-number shuttle cloning vectors were constructed by incorporating the Escherichia coli P15A plasmid origin of replication into the pAM beta 1-derived vectors, pIL252 and pIL253. The resulting vectors were structurally stable in Lactococcus, which is a common feature of theta-replicating plasmids, and also displayed good structural stability in E. coli, possibly due to lack of a resolvase-encoding gene. All the vectors expressed erythromycin resistance (ErR) in both; brain heart infusion medium allowed clear selection of ErR in E. coli. Some of the vectors provided insertional inactivation of a cat (pTRKH1; pTRKL1) or tet (pTRKH1; pTRKH3; pTRKH5) gene to facilitate screening for clones. Multiple cloning sites in a lacZ gene, which expresses beta-galactosidase in lacZ alpha-complementing E. coli strains, were included in some vectors (pTRKH2/H5 and pTRKL2) to enable blue/white screening of clones on XGal plates. The 'H' and 'L' prefixes signify if the vector exists at high (H) or low (L) copy number in Lactococcus. Successful introduction of these vectors into Lactococcus, Enterococcus, Streptococcus and Lactobacillus highlights their utility for expanding the possibilities for genetic manipulation of these industrially significant bacteria.

Gene replacement in Lactobacillus helveticus

An efficient method for gene replacement in Lactobacillus helveticus CNRZ32 was developed by utilizing pSA3 as an integration vector. This plasmid is stably maintained in CNRZ32 at 37 degrees C but is unstable at 45 degrees C. This method consisted of a two-step gene-targeting technique: (i) chromosomal integration of a plasmid carrying an internal deletion in the gene of interest via homologous recombination and (ii) excision of the vector and the wild-type gene via homologous recombination, resulting in gene replacement. By using this procedure, the chromosomal X-prolyl dipeptidyl aminopeptidase gene (pepXP) of CNRZ32 was successfully inactivated.

Cloning of a chromosomal gene required for phage infection of Lactococcus lactis subsp. lactis C2

A phage-resistant mutant with a defect in a membrane component required for phage infections in Lactococcus lactis subsp. lactis C2 was transformed with a chromosomal library of the wild-type, phage-sensitive strain. Of the 4,200 transformants screened for phage sensitivity, three were positively identified as phage sensitive. A cause-and-effect relationship between the cloned chromosomal fragments and the phage-sensitive phenotype was established on the basis of the following two criteria: (i) the frequency of loss of the cloned fragments in the absence of antibiotic selection pressure correlated with the frequency of loss of phage sensitivity; and (ii) phage sensitivity was transferred to 100% of recipient, phage-resistant cells transformed with the cloned fragment. The cloned chromosomal DNA from the three independent isolates was physically mapped with restriction endonucleases. The sizes of the cloned fragments were 9.6, 11.8, and 9.5 kb. Each fragment contained an identical stretch of DNA common to all three, which was 9.4 kb. The gene that conferred phage sensitivity was localized by subcloning to a 4.5-kb region. Further subcloning indicated that a single EcoRI site within the 4.5-kb region must lie within the gene or its promoter. The required 4.5-kb region was sequenced and found to code for one partial and two complete open reading frames. The gene required for complementation was functionally mapped by Tn5 mutagenesis and localized to one of the two complete open reading frames, which was designated pip (an acronym for phage infection protein). pip is 2,703 bases in length. Potential promoters start 206 and 212 bases upstream of the open reading frame. A ribosome binding site and a seven-base spacer precede the GTG (Val) translation initiation codon. The amino acid sequence deduced from the gene has 901 residues and an M(r) of 99,426. Hydropathy analysis revealed four to six potential membrane-spanning regions, one near the amino terminus and the others at the extreme carboxyl terminus. The amino terminus has characteristics of a signal sequence. The putative protein would have a 650-residue, central polar domain.

Effect of Increasing the Copy Number of Bacteriophage Origins of Replication, in trans , on Incoming-Phage Proliferation

Bacteriophage resistance mechanisms which are derived from a bacteriophage genome are termed Per (phage-encoded resistance). When present in trans in Lactococcus lactis NCK203, Per50, the cloned origin of replication from phage φ50, interferes with φ50 replication. The per50 fragment was found to afford negligible protection to NCK203 against φ50 infection when present in a low-copy-number plasmid, pTRK325. A high-copy-number Per50 construct (pTRK323) dramatically affected φ50 infection, reducing the efficiency of plaquing (EOP) to 2.5 × 10 -4 and the plaque size to pinhead proportions. This clone also afforded significant protection against other related small isometric phages. Per31 was cloned from phage φ31 and demonstrated to function as an origin of replication by enabling replication of per31 -containing plasmids, in NCK203, on φ31 infection. A low-copy-number Per31 plasmid (pTRK360) reduced the EOP of φ31 on NCK203 to 0.3 and the plaque diameter from 1.5 to 0.5 mm. When this plasmid was cloned in high copy number, the EOP was further reduced to 7.2 × 10 -7 but the plaques were large and contained Per31-resistant phages. Characterization of these “new” phages revealed at least two different types that were similar to φ31, except that DNA alterations were noted in the region containing the origin. This novel and powerful abortive phage resistance mechanism should prove useful when directed at specific, problematic phages.

Molecular cloning, sequence, structural analysis and expression of the histidyl-tRNA synthetase gene from Streptococcus equisimilis

The histidyl-tRNA synthetase gene (hisS) from Streptococcus equisimilis was cloned and sequenced. The gene for this aminoacyl-tRNA synthetase has an open reading frame of 1278 nucleotides. The deduced amino acid sequence encodes a protein of 426 amino acids with MW = 47,932. The protein is predicted to be soluble with a pl = 5.27. The protein sequence has extensive overall identity/similarity with the Escherichia coli and the yeast histidyl-tRNA synthetases (approximately 58% and approximately 20%, respectively). A putative promoter for gene transcription lies within two hundred nucleotides of the polypeptide start codon. The enzyme was overexpressed, to a level of about 18% of total cellular protein, as a fusion protein (containing an additional 15 amino acids) in E. coli using the pT7 expression system containing the T7 RNA polymerase/promoter (Tabor and Richardson, Proc. Natl. Acad. Sci. U.S.A. 82:1074-1078, 1985). The predicted MW for the hisS gene product is in good agreement with the size of the fusion protein determined by SDS-PAGE (M(r) = 53,700). Amino acid sequencing of the intact fusion protein and proteolytic fragments confirmed the deduced sequence of the synthetase at many positions throughout the protein. The expressed protein catalyzed the specific aminoacylation of tRNA(His) in vitro.

Molecular characterization of a second abortive phage resistance gene present in Lactococcus lactis subsp. lactis ME2

The fifth phage resistance factor from the prototype phage-insensitive strain Lactococcus lactis subsp. lactis ME2 has been characterized and sequenced. The genetic determinant for Prf (phage resistance five) was subcloned from the conjugative plasmid pTN20, which also encodes a restriction and modification system. Typical of other abortive resistance mechanisms, Prf reduces the efficiency of plaquing to 10(-2) to 10(-3) and decreases the plaque size and burst size of the small isometric-headed phage p2 in L. lactis subsp. lactis LM0230. However, normal-size plaques occurred at a frequency of 10(-4) and contained mutant phages that were resistant to Prf, even after repeated propagation through a sensitive host. Prf does not prevent phage adsorption or promote restriction and modification activities, but 90% of Prf+ cells infected with phage p2 die. Thus, phage infections in Prf+ cells are aborted. Prf is effective in both L. lactis subsp. lactis and L. lactis subsp. cremoris strains against several small isometric-headed phages but not against prolate-headed phages. The Prf determinant was localized by Tn5 mutagenesis and subcloning. DNA sequencing identified a 1,056-nucleotide structural gene designated abiC. Prf+ expression was obtained when abiC was subcloned into the lactococcal expression vector pMG36e. abiC is distinct from two other lactococcal abortive phage resistance genes, abiA (Hsp+, from L. lactis subsp. lactis ME2) and abi416 (Abi+, from L. lactis subsp. lactis IL416). Unlike abiA, the action of abiC does not appear to affect DNA replication. Thus, abiC represents a second abortive system found in ME2 that acts at a different point of the phage lytic cycle.

In vivo inactivation of the Streptococcus mutans recA gene mediated by PCR amplification and cloning of a recA DNA fragment

The inactivation of the RecA protein in pathogenic oral streptococci would facilitate genetic analysis of potential virulence factors in these strains. Comparison of recA nucleotide (nt) sequences from a number of bacteria has suggested that two regions of highly conserved RecA amino acid (aa) sequence could be used as a basis for synthesizing degenerate oligodeoxyribonucleotide primers with which to amplify recA homologues from the streptococci. Accordingly, primer mixtures were used to amplify a 693-bp fragment of the Streptococcus mutans chromosome by PCR. The amplified fragment was cloned and its identity confirmed via hybridization to an Escherichia coli recA gene probe and by nt sequence determination. The recA homologue fragment from S. mutans GS-5 was 63% and 75% homologous to the deduced aa sequences of the E. coli and Bacillus subtilis RecA enzymes, respectively. The S. mutans recA fragment was mutagenized in vitro via insertional inactivation and returned to the chromosome using allelic exchange. The resulting strains of S. mutans were shown to be substantially more sensitive to UV irradiation than the wild-type strain. Further, the ability to incorporate linear markers into the chromosome was abolished in putative S. mutans recA strains, thus indicating the functional inactivation of RecA in these microorganisms.

Molecular analyses of the lactococcin A gene cluster from Lactococcus lactis subsp. lactis biovar diacetylactis WM4

The genes responsible for bacteriocin production and immunity in Lactococcus lactis subsp. lactis biovar diacetylactis WM4 were localized and characterized by DNA restriction fragment deletion, subcloning, and nucleotide sequence analysis. The nucleotide sequence of a 5.6-kb AvaII restriction fragment revealed a cluster with five complete open reading frames (ORFs) in the same orientation. DNA and protein homology analyses, combined with deletion and Tn5 insertion mutagenesis, implicated four of the ORFs in the production of and immunity to lactococcin A. The last two ORFs in the cluster were the lactococcin A structural and immunity genes, lcnA and lciA. The two ORFs immediately upstream of lcnA and lciA were designated lcnC and lcnD, and the proteins that they encoded showed similarities to proteins of signal sequence-independent secretion systems. lcnC encodes a protein of 716 amino acids that could belong to the HlyB family of ATP-dependent membrane translocators. LcnC contains an ATP binding domain in a conserved C-terminal stretch of approximately 200 amino acids and three putative hydrophobic segments in the N terminus. The lcnD product, LcnD, of 474 amino acids, is essential for lactococcin A expression and shows structural similarities to HlyD and its homologs. On the basis of these results, a secretion apparatus that is essential for the full expression of active lactococcin A is postulated.

IS946-mediated integration of heterologous DNA into the genome of Lactococcus lactis subsp. lactis

The lactococcal insertion sequence IS946 was used to construct suicide vectors for insertion of heterologous DNA into chromosomal and plasmid sequences of Lactococcus lactis subsp. lactis. Electroporation of L. lactis strains, including the recombination-deficient strain MMS362, with the suicide vector pTRK145 yielded 10(1) to 10(3) transformants per micrograms of DNA. pTRK145 insertions occurred primarily in the chromosome, with one insertion detected in a resident plasmid. Vector-specific probes identified junction fragments that varied among transformants, indicating random insertions of pTRK145.

Construction of an IS946-based composite transposon in Lactococcus lactis subsp. lactis

An artificial composite transposon was constructed based on the lactococcal insertion sequence IS946. A 3.0-kb element composed of the pC194 cat gene (Cmr) flanked by inversely repeated copies of IS946 was assembled on pBluescript KS+. When subcloned into the shuttle vector pSA3 (Emr), two putative transposons were created on the recombinant plasmid pTRK128: the 3.0-kb Cmr element (Tn-CmA) and an inverse 11.5-kb Emr element (Tn-EmA). pTRK128 was electroporated into the recombination-deficient strain Lactococcus lactis MMS362, which contains the self-transmissible plasmid pRS01. An MMS362 Cmr Emr transformant was used to assay for transposition events via conjugal mobilization of pTRK128-encoded Cmr or Emr to L. lactis LM2345. Transfer of either marker alone occurred at frequencies of ca. 2 x 10(-4) per input donor. Approximately 19% of the Emr transconjugants were Cms, indicating loss of the cat gene marker. No Cmr Ems transconjugants were recovered (n = 550). Plasmid analysis showed that the Cms Emr isolates contained a single large plasmid that was determined to be a cointegrate between pRS01 and the Tn-EmA element. A 32P-labeled pSA3 probe hybridized specifically to pTRK128 sequences and revealed different junction fragments within each of the cointegrate plasmids. DNA sequence analysis of the Tn-EmA::pRS01 junctions from a representative cointegrate verified transposition by Tn-EmA. This represents the first example of a functional composite transposon in the genus Lactococcus and serves as an experimental tool and model for the genetic analyses of transposons in these organisms.

Shuttle plasmid vectors for Lactobacillus casei and Escherichia coli with a minus origin

Recombinant plasmids which can be used as shuttle vectors between Escherichia coli and the industrially used strains of Lactobacillus casei were constructed. They have replication regions closely related to those of pUB110 and are likely to replicate by a rolling-circle mechanism via a plus-strand-specific DNA intermediate in L. casei. Both orientations of palA from the staphylococcal plasmid pC194 and those of the intergenic region from coliphage M13 are identified as active minus origins in L. casei, in contrast to the pAM alpha 1 delta 1-derived BA3 minus origin which does not function in L. casei. Stability of the plasmids increased in L. casei when one of these two active minus origins was inserted. All the DNA sequences of the constructed vectors were known.

Molecular cloning in Lactobacillus helveticus by plasmid pSA3::pVA797 co-integrate formation and conjugal transfer

A gene encoding beta-glucanase activity from Bacillus amyloliquefaciens was subcloned in both orientations into plasmid shuttle vector pSA3. In only one orientation could a co-integrate be generated with the conjugative plasmid pVA797. The plasmid co-integrate was conjugated into Lactobacillus helveticus strain CNRZ450, where it was stably maintained without antibiotic selection and exhibited beta-glucanase activity. This method of introducing cloned DNA into thermophilic lactobacilli will facilitate the study of heterologous gene expression in non-transformable species.

In vivo genetic exchange of a functional domain from a type II A methylase between lactococcal plasmid pTR2030 and a virulent bacteriophage

The conjugative plasmid pTR2030 confers bacteriophage resistance to lactococci by two independent mechanisms, an abortive infection mechanism (Hsp+) and a restriction and modification system (R+/M+). pTR2030 transconjugants of lactococcal strains are used in the dairy industry to prolong the usefulness of mesophilic starter cultures. One bacteriophage which has emerged against a pTR2030 transconjugant is not susceptible to either of the two defense systems encoded by the plasmid. Phage nck202.50 (phi 50) is completely resistant to restriction by pTR2030. A region of homology between pTR2030 and phi 50 was subcloned, physically mapped, and sequenced. A region of 1,273 bp was identical in both plasmid and phage, suggesting that the fragment had recently been transferred between the two genomes. Sequence analysis confirmed that the transferred region encoded greater than 55% of the amino domain of the structural gene for a type II methylase designated LlaI. The LlaI gene is 1,869 bp in length and shows organizational similarities to the type II A methylase FokI. In addition to the amino domain, upstream sequences, possibly containing the expression signals, were present on the phage genome. The phage phi 50 fragment containing the methylase amino domain, designated LlaPI, when cloned onto the shuttle vector pSA3 was capable of modifying another phage genome in trans. This is the first report of the genetic exchange between a bacterium and a phage which confers a selective advantage on the phage. Definition of the LlaI system on pTR2030 provides the first evidence that type II systems contribute to restriction and modification phenotypes during host-dependent replication of phages in lactococci.

Improved electroporation and cloning vector system for gram-positive bacteria

A protocol for transformation of intact Enterococcus faecalis cells by electroporation was developed through a systematic examination of the effects of changes in various parameters, including (i) growth conditions; (ii) composition of the electroporation solution; (iii) electroporation conditions, such as field strength and resistance; (iv) size, concentration, and purity of DNA used for transformation; and (v) conditions used to select for transformants. Key features of this protocol include the use of exponential-phase cells grown in inhibitory concentrations of glycine and the use of an acidic sucrose electroporation solution. Frequencies of greater than 2 x 10(5) transformants per microgram of plasmid DNA were obtained for E. faecalis cells, whereas various strains of streptococci and Bacillus anthracis were transformed at frequencies of 10(3) to 10(4) transformants per microgram of plasmid DNA with the same protocol. A novel Escherichia coli-Streptococcus and Enterococcus shuttle cloning vector, pDL276, was constructed for use in conjunction with the electroporation system. This vector features a multiple cloning site region flanked by E. coli transcription termination sequences, a relatively small size (less than 7 kb), and a kanamycin resistance determinant expressed in both gram-positive and gram-negative hosts. Various enterococcal and streptococcal DNA sequences were cloned in E. coli (including sequences that could not be cloned on other vectors) and were returned to the original host by electroporation. The vector and electroporation system was also used to clone directly into E. faecalis.

Molecular characterization of the nisin resistance region of Lactococcus lactis subsp. lactis biovar diacetylactis DRC3

The nisin resistance determinant of Lactococcus lactis subsp. lactis biovar diacetylactis DRC3 was localized onto a 1.3-kb EcoRI-NdeI fragment by subcloning and interrupting the NdeI site by cloning random NdeI fragments into it; the nisin resistance determinant was then sequenced. The nucleotide sequence revealed a large open reading frame containing 318 codons. Putative transcription and translation signal sequences were located directly upstream from the initiation codon. Immediately downstream of the termination codon was a palindromic region resembling a rho-independent termination sequence. This 957-nucleotide open reading frame and its associated transcription and translation signal sequences were cloned into plasmid-free L. lactis subsp. lactis LM0230 and conferred an MIC of 160 IU of nisin per ml. This level of nisin resistance is equivalent to that of the initial nisin-resistant subclone, pFM011, used for further subcloning in this study. The inferred amino acid sequence would result in a protein with a molecular mass of 35,035 Da. This value was in agreement with the molecular mass of a protein detected after in vitro transcription and translation of DNA encoding the nisin resistance gene, nsr. This protein contained a hydrophobic region at the N terminus that was predicted to be membrane associated but did not contain a typical signal sequence cleavage site. No significant homology was detected when the DNA sequence of the nsr gene and the amino acid sequence of its putative product were compared with other available sequences. When subjected to Southern hybridization, a 1.2-kb DraI fragment encoding the nsr gene did not hybridize with the genomic DNA of the nisin-producing strain L. lactis subsp. lactis 11454.

Cloning, phenotypic expression, and DNA sequence of the gene for lactacin F, an antimicrobial peptide produced by Lactobacillus spp

Lactacin F is a heat-stable bacteriocin produced by Lactobacillus acidophilus 11088. A 63-mer oligonucleotide probe deduced from the N-terminal lactacin F amino acid sequence was used to clone the putative laf structural gene from plasmid DNA of a lactacin F-producing transconjugant, L. acidophilus T143. One clone, NCK360, harbored a recombinant plasmid, pTRK160, which contained a 2.2-kb EcoRI fragment of the size expected from hybridization experiments. An Escherichia coli-L. acidophilus shuttle vector was constructed, and a subclone (pTRK162) containing the 2.2-kb EcoRI fragment was introduced by electroporation into two lactacin F-negative strains, L. acidophilus 89 and 88-C. Lactobacillus transformants containing pTRK162 expressed lactacin F activity and immunity. Bacteriocin produced by the transformants exhibited an inhibitory spectrum and heat stability identical to those of the wild-type bacteriocin. An 873-bp region of the 2.2-kb fragment was sequenced by using a 20-mer degenerate lactacin F-specific primer to initiate sequencing from within the lactacin F structural gene. Analysis of the resulting sequence identified an open reading frame which could encode a protein of 75 amino acids. The 25 N-terminal amino acids for lactacin F were identified within the open reading frame along with an N-terminal extension, possibly a signal sequence. The lactacin F N-terminal sequence, through the remainder of the open reading frame (57 amino acids; 6.3 kDa), correlated extremely well with composition analyses of purified lactacin F which also predicted a size of 51 to 56 amino acid residues. Molecular characterization of lactacin F identified a small hydrophobic peptide that may be representative of a common bacteriocin class in lactic acid bacteria.

Analysis of the lacZ sequences from two Streptococcus thermophilus strains: comparison with the Escherichia coli and Lactobacillus bulgaricus beta-galactosidase sequences

The lacZ gene from Streptococcus thermophilus A054, a commercial yogurt strain, was cloned on a 7.2 kb PstI fragment in Escherichia coli and compared with the previously cloned lacZ gene from S. thermophilus ATCC 19258. Using the dideoxy chain termination method, the DNA sequences of both lacZ structural genes were determined and found to be 3071 bp in length. When the two sequences were more closely analysed, 21 nucleotide differences were detected, of which only nine resulted in amino acid changes in the proteins, the remainder occurring in wobble positions of the respective codons. Only three bases separated the termination codon for the lacS gene from the initiation codon for lacZ, suggesting that the lactose utilization genes are organized as an operon. The amino acid sequence of the beta-galactosidase, derived from the DNA sequence, corresponds to a protein with a molecular mass of 116860 Da. Comparison of the S. thermophilus amino acid sequences with those from Lactobacillus bulgaricus, E. coli and Klebsiella pneumoniae showed 48, 35 and 32.5% identity respectively. Although little sequence homology was observed at the DNA level, many regions conserved in the amino acid sequence were identified when the beta-galactosidase proteins from S. thermophilus, E. coli and L. bulgaricus were compared.

Cloning, expression, and sequence determination of a bacteriophage fragment encoding bacteriophage resistance in Lactococcus lactis

A number of host-encoded phage resistance mechanisms have been described in lactococci. However, the phage genome has not been exploited as a source of additional resistance determinants. A 4.5-kb BamHI-HindIII fragment of phage nck202.50 (phi 50) was subcloned in streptococcus-Escherichia coli shuttle plasmid pSA3 and introduced into Lactococcus lactis NCK203 and MG1363 by protoplast transformation. This cloned phage fragment directed a bacteriophage resistance phenotype designated Per (phage-encoded resistance). Both phi 50 and a distantly related phage, nck202.48 (phi 48), formed small plaques on strain NCK213 at a slightly reduced efficiency of plaquing on the Per+ host. The per locus was further reduced to a 1.4-kb fragment through in vitro deletion analysis. The 1.4-kb fragment was sequenced, and the Per phenotype was found to be associated with a ca. 500-bp region rich in direct and inverted repeats. We present evidence that the Per region contains a phage origin of replication which, in trans, may interfere with phage replication by titration of DNA polymerase or other essential replication factors. It was demonstrated that the Per+ phenotype is not a result of reduced adsorption or action of a restriction and modification system. Per+ activity was not detected against six independent phages which were previously shown to be sensitive to the Hsp+ mechanism. The mutually exclusive resistance mechanisms could be combined to confer resistance to both types of phages (Hsp resistant and Per resistant) in a single host. This is the first description in lactococci of a phage resistance phenotype, other than superinfection immunity, originating from a lactococcal phage genome.

Oral immunization with recombinant Streptococcus lactis carrying the Streptococcus mutans surface protein antigen gene

A recombinant Streptococcus lactis strain which carries the structural gene for a surface protein antigen (PAc) of 190,000 daltons from Streptococcus mutans serotype c was constructed for development of an oral vaccine against dental caries. The gene from S. mutans MT8148 joined to shuttle vector pSA3 was successfully transformed into S. lactis IL1403. A small amount of PAc was detected in the cell homogenate and cytoplasmic fraction of the recombinant S. lactis, but not in the culture supernatant of the recombinant, by Western immunoblotting and dot immunoblotting. The level of PAc-specific mRNA in the recombinant strain was lower than that in S. mutans MT8148. However, significant salivary immunoglobulin A and serum immunoglobulin G responses to PAc were induced in mice immunized orally with the recombinant S. lactis.

Characterization of insertion sequence IS946, an Iso-ISS1 element, isolated from the conjugative lactococcal plasmid pTR2030

The self-transmissible plasmid pTR2030 mobilized nonconjugative heterologous cloning vectors pGK12 (Cmr Emr) and pSA3 (Emr) at frequencies of 10(-5) to 10(-6) per input donor. Transconjugants harbored a 51- or 58-kilobase (kb) plasmid not found in the parental strains that cotransferred at high frequency with Cmr Emr and pTR2030-encoded phage resistance (Hsp+) in second-round matings (10(-1) per input donor). Restriction endonuclease mapping and DNA-DNA hybridization identified the 51- to 58-kb plasmids as pTR2030::vector cointegrates. Examination of four cointegrates indicated that pGK12 and pSA3 had inserted within two locations on pTR2030. Resolution of the cointegrates generated vector derivatives containing a 0.8-kb insert of pTR2030 DNA. Restriction analyses of several resolution plasmids indicated that the 0.8-kb element had inserted into various positions within pGK12 and pSA3 and in certain cases had inactivated the Cmr or Emr marker of pGK12. A conjugative mobilization assay demonstrated that the 0.8-kb element, designated IS946, mediated transpositional recombination. Nucleotide sequence determination identified IS946 as an 808-base-pair (bp) insertion sequence sharing ca. 96% homology with lactococcal insertion sequence ISS1. IS946 differed by 27 and 31 bp from ISS1S and ISS1T, respectively, and in 2 of 226 amino acids in the deduced sequence of the putative transposase. IS946 has perfect 18-bp terminal inverted repeats, identical to ISS1, and similarly generated 8-bp direct repeats of the target site upon insertion.

Genetic approaches to the study of oral microflora: a review

As the study of oral microorganisms intensified almost 2 decades ago, the application of genetic techniques resulted in important contributions to the understanding of this clinically and ecologically important group of bacteria. The isolation and characterization of mutants of cariogenic streptococci helped to focus attention on traits that were important in colonization and virulence. Such classic genetic approaches gave way to molecular genetic techniques, including recombinant DNA methodology in the late 1970s. Gene cloning systems and methods to move DNA into cells have been developed for oral streptococci. Many streptococcal genes thought to be important in colonization and virulence have since been cloned and their nucleotide sequence determined. Mutant strains have been constructed using defective copies of cloned genes in order to create specific genetic lesions on the bacterial chromosome. By testing such mutants in animal models, a picture of the cellular and molecular basis of dental caries is beginning to emerge. These modern genetic methodologies also are being employed to develop novel and efficacious cell-free or whole cell vaccines against this infection. Genetic approaches and analyses are now being used to dissect microorganisms important in periodontal disease as well. Such systems should be able to exploit advances made in genetically manipulating related anaerobes, such as the intestinal Bacteroides. Gene cloning techniques in oral anaerobes, Actinomyces and Actinobacillus, are already beginning to pay dividends in helping understand gene structure and expression. Additional effort is needed to develop facile systems for genetic manipulation of these important groups of microorganisms.

Surface hydrophobicity, adherence, and aggregation of cell surface protein antigen mutants of Streptococcus mutans serotype c

The pac gene of the serotype c strain Streptococcus mutans MT8148 encodes a cell surface protein antigen (PAc) of approximate 190 kilodaltons. The serotype c strain S. mutans GS-5 does not produce the 190-kilodalton PAc but produces a lower-molecular-weight protein that reacts with anti-PAc serum. The SphI-BamHI fragment of the pac gene was ligated with the S. mutans-Escherichia coli shuttle vector pSA3. The chimeric shuttle vector was transformed into strain GS-5, and two transformants (TK15 and TK18) were isolated. These transformants produced a large amount of cell-free and cell-bound PAc of 190 kilodaltons. No plasmid was isolated from these transformants, and the EcoRI fragments of their chromosomal DNA hybridized with the erythromycin resistance gene in the shuttle vector DNA, indicating insertion of the chimeric shuttle vector DNA into the chromosomal DNA. The cell hydrophobicity of strains TK15 and TK18 as well as PAc-defective mutants constructed by inserting an erythromycin resistance gene into the pac gene of strain MT8148 was analyzed. Strains MT8148, TK15, and TK18 were hydrophobic. On the other hand, strain GS-5 and PAc-defective MT8148 transformants were hydrophilic. Resting cells of the hydrophobic strains attached in larger numbers to saliva-coated hydroxyapatite than did the hydrophilic strains. Human whole saliva induced the aggregation of cells of the hydrophobic strains but not that of cells of the hydrophilic strains. These results suggest that cell surface PAc of S. mutans serotype c participates in attachment of the streptococcal cell to experimental pellicles.