Genetic characterization of the stabilizing functions of a region of broad-host-range plasmid RK2

Molecular characterization of the replicon of the Pediococcus pentosaceus 43200 pediocin A plasmid pMD136

The pediocin A-encoding plasmid of Pediococcus pentosaceus 43200, pMD136, was characterized by restriction enzyme analysis. Analysis of its replicon was facilitated by the construction of a probe vector consisting of the Escherichia coli plasmid pSP72 and the cat gene from Staphylococcus aureus plasmid pC194. The replication region of pMD136 was localized on a 1.6-kb EcoRI/BglII fragment. Sequencing analysis revealed a non-coding region, repA, spanning the first 440 bp, followed by an open reading frame, repB, encoding a putative protein of 390 amino acids. The non-coding region contained two sets of 6-bp and two sets of 22-bp direct repeats and two sets of inverted repeats upstream of the open reading frame. Strong homology of the isolated replicon was found to theta-type replicons of Lactococcus lactis plasmids. Segregational stability assay suggested at least two regions as potentially involved in the stabilization of pMD136. The plasmid's strong homology to other theta-type replicons and its relatively high stability suggest that pMD136 belongs to the widespread family of theta-replication plasmids.

The kilE locus of promiscuous IncP alpha plasmid RK2 is required for stable maintenance in Pseudomonas aeruginosa

Eight coordinately regulated operons constitute the kor regulon of the IncP alpha plasmid RK2. Three operons specify functions required for replication initiation, conjugative transfer, and control of gene expression. The functions of the other operons, including those of the four coregulated operons that compose the kilA, kilC, and kilE loci, have not been determined. Here, we present the first evidence that a kil determinant is involved in IncP plasmid maintenance. Elevation of KorC levels specifically to reduce the expression of the KorC-regulated kilC and kilE operons severely affected the maintenance of both the IncP alpha plasmid RK2lac and the IncP beta plasmid R751 in Pseudomonas aeruginosa but had little effect on plasmid maintenance in Escherichia coli. Precise deletion of the two kilE operons from RK2lac was achieved with the VEX mutagenesis system for large genomes. The resulting plasmid showed significant loss of stability in P. aeruginosa only. The defect could be complemented by reintroduction of kilE at a different position on the plasmid. The instability of the RK2lac delta kilE mutant did not result from a reduction in average plasmid copy number, reduced expression of kilC, decreased conjugative transfer, or loss of the korE regulator. We found that both the par and kilE loci are required for full stability of RK2lac in P. aeruginosa and that the par and kilE functions act independently. These results demonstrate a critical role for the kilE locus in the stable inheritance of RK2 in P. aeruginosa.

Construction and use of a versatile set of broad-host-range cloning and expression vectors based on the RK2 replicon

The plasmid vectors described in this report are derived from the broad-host-range RK2 replicon and can be maintained in many gram-negative bacterial species. The complete nucleotide sequences of all of the cloning and expression vectors are known. Important characteristics of the cloning vectors are as follows: a size range of 4.8 to 7.1 kb, unique cloning sites, different antibiotic resistance markers for selection of plasmid-containing cells, oriT-mediated conjugative plasmid transfer, plasmid stabilization functions, and a means for a simple method for modification of plasmid copy number. Expression vectors were constructed by insertion of the inducible Pu or Pm promoter together with its regulatory gene xylR or xylS, respectively, from the TOL plasmid of Pseudomonas putida. One of these vectors was used in an analysis of the correlation between phosphoglucomutase activity and amylose accumulation in Escherichia coli. The experiments showed that amylose synthesis was only marginally affected by the level of basal expression from the Pm promoter of the Acetobacter xylinum phosphoglucomutase gene (celB). In contrast, amylose accumulation was strongly reduced when transcription from Pm was induced. CelB was also expressed with a very high induction ratio in Xanthomonas campestris. These experiments showed that the A. xylinum celB gene could not complement the role of the bifunctional X. campestris phosphoglucomutase-phosphomannomutase gene in xanthan biosynthesis. We believe that the vectors described here are useful for cloning experiments, gene expression, and physiological studies with a wide range of bacteria and presumably also for analysis of gene transfer in the environment.

Copy-up mutants of the plasmid RK2 replication initiation protein are defective in coupling RK2 replication origins

The broad host range plasmid RK2 replicates and regulates its copy number in a wide range of Gram-negative bacteria. The plasmid-encoded trans-acting replication protein TrfA and the origin of replication oriV are sufficient for controlled replication of the plasmid in all Gram-negative bacteria tested. The TrfA protein binds specifically to direct repeat sequences (iterons) at the origin of replication. A replication control model, designated handcuffing or coupling, has been proposed whereby the formation of coupled TrfA-oriV complexes between plasmid molecules results in hindrance of origin activity and, consequently, a shut-down of plasmid replication under conditions of higher than normal copy number. Therefore, according to this model, the coupling activity of an initiation protein is essential for copy number control and a copy-up initiation protein mutant should have reduced ability to form coupled complexes. To test this model for plasmid RK2, two previously characterized copy-up TrfA mutations, trfA-254D and trfA-267L, were combined and the resulting copy-up double mutant TFrfA protein TrfA-254D/267L was characterized. Despite initiating runaway (uncontrolled) replication in vivo, the copy-up double-mutant TrfA protein exhibited replication kinetics similar to the wild-type protein in vitro. Purified TrfA-254D, TrfA-267L, and TrfA-254D/267L proteins were then examined for binding to the iterons and for coupling activity using an in vitro ligase-catalyzed multimerization assay. It was found that both single and double TrfA mutant proteins exhibited substantially reduced (single mutants) or barely detectable (double mutant) levels of coupling activity while not being diminished in their capacity to bind to the origin of replication. These observations provide direct evidence in support of the coupling model of replication control.

Regulation of a heat shock sigma32 homolog in Caulobacter crescentus

High temperature and other environmental stresses induce the expression of several heat shock proteins in Caulobacter crescentus, including the molecular chaperones DnaJ, DnaK, GrpE, and GroEL and the Lon protease. We report here the isolation of the rpoH gene encoding a homolog of the Escherichia coli RNA polymerase sigma32 subunit, the sigma factor responsible for the transcription of heat shock promoters. The C. crescentus sigma32 homolog, predicted to be a 33.7-kDa protein, is 42% identical to E. coli sigma32 and cross-reacts with a monoclonal antibody to E. coli sigma32. Functional homology was demonstrated by complementing the temperature-sensitive growth defect of an E. coli rpoH deletion mutant with the C. crescentus rpoH gene. Immunoblot analysis showed a transient rise in sigma32 levels after a temperature shift from 30 to 42 degrees C similar to that described for E. coli. In addition, increasing the cellular content of sigma32 by introducing a plasmid-encoded copy of rpoH induced DnaK expression in C. crescentus cultures grown at 30 degrees C. The C. crescentus rpoH gene was transcribed from either of two heat shock consensus promoters. rpoH transcription and sigma32 levels increased coordinately following heat shock, indicating that transcriptional regulation contributes to sigma32 expression in this organism. Both the rpoH gene and sigma32 protein were expressed constitutively throughout the cell cycle at 30 degrees C. The isolation of rpoH provides an important tool for future studies of the role of sigma32 in the normal physiology of C. crescentus.

Characterization of the stable maintenance properties of the par region of broad-host-range plasmid RK2

A 3.2-kb fragment encoding five genes, parCBA/DE, in two divergently transcribed operons promotes stable maintenance of the replicon of the broad-host-range plasmid RK2 in a vector-independent manner in Escherichia coli. The parDE operon has been shown to contribute to stabilization through the postsegregational killing of plasmid-free daughter cells, while the parCBA operon encodes a resolvase, ParA, that mediates the resolution of plasmid multimers through site-specific recombination. To date, evidence indicates that multimer resolution alone does not play a significant role in RK2 stable maintenance by the parCBA operon in E. coli. It has been proposed, instead, that the parCBA region encodes an additional stability mechanism, a partition system, that ensures that each daughter cell receives a plasmid copy at cell division. However, studies carried out to date have not directly determined the plasmid stabilization activity of the parCBA operon alone. An assessment was made of the relative contributions of postsegregational killing (parDE) and the putative partitioning system (parCBA) to the stabilization of mini-RK2 replicons in E. coli. Mini-RK2 replicons carrying either the entire 3.2-kb (parCBA/DE) fragment or the 2.3-kb parCBA region alone were found to be stably maintained in two E. coli strains tested. The stabilization found is not due to resolution of multimers. The stabilizing effectiveness of parCBA was substantially reduced when the plasmid copy number was lowered, as in the case of E. coli cells carrying a temperature-sensitive mini-RK2 replicon grown at a nonpermissive temperature. The presence of the entire 3.2-kb region effectively stabilized the replicon, however, under both low- and high-copy-number-conditions. In those instances of decreased plasmid copy number, the postsegregational killing activity, encoded by parDE, either as part of the 3.2-kb fragment or alone played the major role in the stabilization of mini-RK2 replicons within the growing bacterial population. Our findings indicate that the parCBA operon functions to stabilize by a mechanism other than cell killing and resolution of plasmid multimers, while the parDE operon functions solely to stabilize plasmids by cell killing. The relative contribution of each system to stabilization depends on plasmid copy number and the particular E. coli host.

The plasmid RK2 initiation protein binds to the origin of replication as a monomer

The TrfA protein encoded by the broad host range bacterial plasmid RK2 specifically binds to eight direct repeats (iterons) present at the plasmid replication origin to initiate DNA replication. Purified TrfA protein is largely in the form of a dimer, and using a dimerization test system that involves the fusion of the amino-terminal domain of the lambda cI repressor protein to TrfA, we show that the TrfA protein forms dimers in vivo. Because of the high stability of the dimer form of TrfA, the formation of heterodimers between the wild-type and different sized TrfA proteins requires in vivo de novo folding of the primary protein sequence or in vitro denaturation and renaturation. The results of gel mobility shift assays using in vitro or in vivo formed heterodimers indicated that the TrfA protein binds to the iteron DNA as a monomer. Furthermore, when the monomeric and dimeric forms of TrfA are separated by gel filtration chromatography, only the protein in the chromatographic position of the monomeric form demonstrated significant DNA binding activity. These results indicate that only the monomer form of the TrfA protein is active for binding to the iterons at the RK2 replication origin.

Plasmid RK2 toxin protein ParE: purification and interaction with the ParD antitoxin protein

The parDE operon, located within the 3.2-kb stabilization region of plasmid RK2, encodes antitoxin (ParD) and toxin (ParE) proteins that stabilize the maintenance of this broad-host-range plasmid via a postsegregational killing mechanism. A ParE protein derivative, designated ParE', was purified by construction of a fusion protein, GST-ParE, followed by glutathione-agarose binding and cleavage of the fusion protein. ParE' has three additional amino acids on the N terminus and a methionine residue in place of the native leucine residue. The results of glutathione-agarose affinity binding and glutaraldehyde cross-linking indicate that ParE' exists as a dimer in solution and that it binds to the dimeric form of ParD to form a tetrameric complex. The formation of this complex is presumably responsible for the ability of ParD to neutralize ParE toxin activity. Previous studies demonstrated that the parDE operon is autoregulated as a result of the binding of the ParD protein to the parDE promoter. ParE' also binds to the parDE promoter but only in the presence of the autoregulatory ParD protein. ParE', in the presence or absence of the ParD protein, does not bind to any other part of the 3.2-kb stabilization region. The binding of the ParE' protein to ParD did not alter the DNase I footprint pattern obtained as a result of ParD binding to the parDE promoter. The role of ParE in binding along with ParD to the promoter, if any, remains unclear.

Identification of a partition and replication region in the Alcaligenes eutrophus megaplasmid pMOL28

A 4.64 kb region of the 180 kb heavy metal resistance plasmid pMOL28 of Alcaligenes eutrophus CH34, previously shown to be able to replicate autonomously, was sequenced and analyzed. Three genes involved in plasmid maintenance were identified: parA28 and parB28 are involved in plasmid partitioning and stability, while repA28 encodes a protein required for replication. In addition to the par AB28 genes, a third locus, parS28, required in cis active partitioning was identified. The parABS28 locus of pMOL28 shows strong similarity in organization to the sop, par and rep regions, respectively, of the Escherichia coli F-factor, the E.coli P1 and P7 prophages and the Agrobacterium pTiB6S3 and pRiA4b plasmids. The ParAB28 proteins of pMOL28 also show similarity to the proteins encoded by two conserved open reading frames present in the replication regions of the Pseudomonas putida and Bacillus subtilis chromosomes. The functionality of the pMOL28 par region was examined by performing stability and incompatibility tests between pMOL28 and pMOL846 or pMOL850 which contain the 4.64 EcoRI replicon fragment of pMOL28, cloned in opposite orientations into pSUP202, which is itself unable to replicate in A. eutrophus. The RepA2 8 replication protein showed similarity to the RepL protein of P1, which is required for lytic replication of this E. coli phage. The replication origin of pMOL28, oriV28, seems to be located within the repA28 coding region, and pMOL28 replication may depend on transcriptional activation of oriV28.

Common virulence factors for bacterial pathogenicity in plants and animals

A Pseudomonas aeruginosa strain (UCBPP-PA14) is infectious both in an Arabidopsis thaliana leaf infiltration model and in a mouse full-thickness skin burn model. UCBPP-PA14 exhibits ecotype specificity for Arabidopsis, causing a range of symptoms from none to severe in four different ecotypes. In the mouse model, UCBPP-PA14 is as lethal as other well-studied P. aeruginosa strains. Mutations in the UCBPP-PA14 toxA, plcS, and gacA genes resulted in a significant reduction in pathogenicity in both hosts, indicating that these genes encode virulence factors required for the full expression of pathogenicity in both plants and animals.

A developmentally regulated chromosomal origin of replication uses essential transcription elements

Only one of the two chromosomes in the asymmetric Caulobacter predivisional cell initiates replication in the progeny cells. Transcription from a strong promoter within the origin occurs uniquely from the replication-competent chromosome at the stalked pole of the predivisional cell. This regulated promoter has an unusual sequence organization, and transcription from this promoter is essential for regulated (cell type-specific) replication. Our analysis defines a new class of bacterial origins and suggests a coupling between transcription and replication that is consistent with the phylogenetic relationship of Caulobacter to the ancestral mitochondrion.

Different relative importances of the par operons and the effect of conjugal transfer on the maintenance of intact promiscuous plasmid RK2

The par region of the broad-host-range, IncP alpha plasmid RK2 has been implicated as a stability determinant by its ability to enhance the maintenance of mini-RK2 plasmids or heterologous replicons in a growing population of host cells. The region consists of two operons: parCBA, which encodes a multimer resolution system, and parDE, which specifies a postsegregational response mechanism that is toxic to plasmidless segregants. To assess the importance of this region to the stable maintenance of the complete RK2 plasmid in different hosts, we used the vector-mediated excision (VEX) deletion system to specifically remove the entire par region or each operon separately from an otherwise intact RK2 plasmid carrying a lacZ marker. The par region was found to be important to stable maintenance of RK2lac (pRK2526) in Escherichia coli and five other gram-negative hosts (Agrobacterium tumefaciens, Azotobacter vinelandii, Acinetobacter calcoaceticus, Caulobacter crescentus, and Pseudomonas aeruginosa). However, the relative importance of the parCBA and parDE operons varied from host to host. Deletion of parDE had no effect on the maintenance of pRK2526 in A. calcoaceticus, but it severely reduced pRK2526 maintenance in A. vinelandii and resulted in significant instability in the other hosts. Deletion of parCBA did not alter pRK2526 stability in E. coli, A. tumefaciens, or A. vinelandii but severely reduced plasmid maintenance in A. calcoaceticus and P. aeruginosa. In the latter two hosts and C. crescentus, the delta parCBA mutant caused a notable reduction in growth rate in the absence of selection for the plasmid, indicating that instability resulting from the absence of parCBA may trigger the postsegregational response mediated by parDE. We also examined the effect of the conjugal transfer system on RK2 maintenance in E. coli. Transfer-defective traJ and traG mutants of pRK2526 were stably maintained in rapidly growing broth cultures. On solid medium, which should be optimal for IncP-mediated conjugation, colonies from cells containing the pRK2526 tra mutants displayed significant numbers of white (Lac-) sectors on X-Gal (5-bromo-4-chloro-3-indolyl-beta-D-galactopyranoside) plates, whereas sectors appeared rarely in colonies from tra+ plasmid-containing cells. Both the traJ and traG mutations further reduced the maintenance of the already unstable deltapar derivative. Thus, these experiments with defined mutations in an intact RK2 plasmid have revealed (i) that the par region allows RK2 to adapt to the different requirements for stable maintenance in various hosts and (ii) that conjugal transfer can contribute to the maintenance of RK2 in a growing population, particularly under conditions that are favorable to RK2 transfer.

DNA repair is more important than catalase for Salmonella virulence in mice

Pathogenic microorganisms possess antioxidant defense mechanisms for protection from reactive oxygen metabolites such as hydrogen peroxide (H2O2), which are generated during the respiratory burst of phagocytic cells. These defense mechanisms include enzymes such as catalase, which detoxify reactive oxygen species, and DNA repair systems which repair damage resulting from oxidative stress. To determine the relative importance of these two potentially protective defense mechanisms against oxidative stress encountered by Salmonella during infection of the host, a Salmonella typhimurium double mutant unable to produce either the HPI or HPII catalase was constructed, and compared with an isogenic recA mutant deficient in DNA repair. The recA mutant was hypersusceptible to H2O2 at low cell densities in vitro, while the catalase mutant was more susceptible to high H2O2 concentrations at high cell densities. The catalase mutant was found to be resistant to macrophages and retained full murine virulence, in contrast to the recA mutant which previously was shown to be macrophage-sensitive and attenuated in mice. These observations suggest that Salmonella is subjected to low concentrations of H2O2 while at relatively low cell density during infection, conditions requiring an intact DNA repair system but not functional catalase activity.

Site-specific deletions of chromosomally located DNA segments with the multimer resolution system of broad-host-range plasmid RP4

The multimer resolution system (mrs) of the broad-host-range plasmid RP4 has been exploited to develop a general method that permits the precise excision of chromosomal segments in a variety of gram-negative bacteria. The procedure is based on the site-specific recombination between two directly repeated 140-bp resolution (res) sequences of RP4 effected by the plasmid-borne resolvase encoded by the parA gene. The efficiency and accuracy of the mrs system to delete portions of chromosomal DNA flanked by res sites was monitored with hybrid mini-Tn5 transposons in which various colored (beta-galactosidase and catechol 2,3 dioxygenase) or luminescent (Vibrio harveyi luciferase) phenotypic markers associated to res sequences were inserted in the chromosome of the target bacteria and exposed in vivo to the product of the parA gene. The high frequencies of marker excision obtained with different configurations of the parA expression system suggested that just a few molecules of the resolvase are required to achieve the site-specific recombination event. Transient expression of parA from a plasmid unable to replicate in the target bacterium was instrumental to effect differential deletions within complex hybrid transposons inserted in the chromosome of Pseudomonas putida. This strategy permits the stable inheritance of heterologous DNA segments virtually devoid of the sequences used initially to select their insertion.

Conversion of pBR322-based plasmids into broad-host-range vectors by using the Tn3 transposition mechanism

We constructed a series of transposon vectors which allow efficient in vitro gene manipulation and subsequent introduction of cloned DNA into a variety of gram-negative bacteria. Transfer of the cloned fragment from these multicopy plasmids into self-transmissible broad-host-range vectors is achieved in vivo, using the Tn3 transposition mechanism. Transposition into a variety of broad-host-range plasmids proceeds efficiently, and the resulting recombinant plasmids can be readily transferred and maintained in a variety of gram-negative bacteria. The utility of the transposable vectors was demonstrated by the introduction and expression of the lacIPOZY sequences of Escherichia coli into Pseudomonas putida strains, allowing them to utilize lactose as a sole source of carbon and energy.

Analysis of the multimer resolution system encoded by the parCBA operon of broad-host-range plasmid RP4

The broad-host-range plasmid RP4 encodes a highly efficient partitioning function, termed par, that is capable of stabilizing plasmids in a variety of Gram-negative bacteria independently of the nature of the replicon. The mechanism responsible for plasmid stabilization by this locus appears to be a complex system which includes a site-specific recombination system mediating resolution of plasmid multimers. In this report we present a detailed study on this multimer resolution system (mrs). The parA gene encodes two forms of a resolvase capable of catalysing site-specific recombination between specific sites situated in the promoter region of the parCBA operon. The two ParA proteins that are produced as a result of independent translation initiation at two different start codons within the same open reading frame were overexpressed in Escherichia coli and partially purified. Both forms of the enzyme are able to recombine a supercoiled cointegrate substrate containing two cis-acting elements with the same orientation in an in vitro resolution assay. ParA-mediated, site-specific recombination was found to be independent of any other gene product encoded by the RP4 par locus in vitro and in vivo. The DNA-binding sites for the ParA resolvase were determined using DNase I protection experiments. The results identified three binding sites within the mrs cis-acting region. Both the biochemical properties of the ParA protein and the organization of the cis-acting recombination site revealed a high degree of similarity to the site-specific recombination systems of Tn3-like transposable elements suggesting an evolutionary relationship.

A cytolysin encoded by Salmonella is required for survival within macrophages

A Salmonella gene encoding a cytolysin has been identified by screening for hemolysis on blood agar. DNA sequence analyses together with genetic mapping in Salmonella suggest that it is unrelated to other toxins or hemolysins. The gene (slyA) is present in every strain of Salmonella examined, in Shigella, and in enteroinvasive Escherichia coli but not in other Enterobacteriaceae. SlyA (salmolysin) purified from a derivative of the original clone has hemolytic and cytolytic activity and has a molecular weight predicted by the DNA sequence. The median lethal dose and infection kinetics in mice suggest that the toxin is required for virulence and facilitates Salmonella survival within mouse peritoneal macrophages.

Mosquitocidal toxins of bacilli and their genetic manipulation for effective biological control of mosquitoes

The identification, cloning, and characterization of protein toxins from various species of bacilli have demonstrated the existence of mosquitocidal toxins with different structures, mechanisms of action, and host ranges. A start has been made in understanding the polypeptide determinants of toxicity and insecticidal activity, and the purification of toxins from recombinant organisms may lead to the elucidation of their X-ray crystal structures and the cloning of brush border membrane receptors. The results of cloning mosquitocidal toxins in heterologous microorganisms show the potential of expanding the range of susceptible mosquito species by combining several toxins of different host specificity in one cell. Toxins have been expressed in new microorganisms with the potential for increasing potency by persisting at the larval feeding zone. The powerful tools of bacterial genetics are being applied to engineer genetically stable, persistent toxin expression and expand the insecticidal host ranges of Bacillus sphaericus and Bacillus thuringiensis strains. These techniques, together with modern formulation technology, should eventually lead to the construction of mosquitocidal microorganisms which are effective enough to have a real impact on mosquito-borne diseases.

kil-kor regulon of promiscuous plasmid RK2: structure, products, and regulation of two operons that constitute the kilE locus

The kil-kor regulon of IncP plasmid RK2 is a complex regulatory network that includes genes for replication and conjugal transfer, as well as for several potentially host-lethal proteins encoded by the kilA, kilB, and kilC loci. While kilB is known to be involved in conjugal transfer, the functions of kilA and kilC are unknown. The coregulation of kilA and kilC with replication and transfer genes indicates a possible role in the maintenance or broad host range of RK2. In this work, we found that a fourth kil locus, designated kilE, is located in the kb 2.4 to 4.5 region of RK2 and is regulated as part of the kil-kor regulon. The cloned kilE locus cannot be maintained in Escherichia coli host cells, unless korA or korC is also present in trans to control its expression. The nucleotide sequence of the kilE region revealed two potential multicistronic operons. The kleA operon consists of two genes, kleA and kleB, predicted to encode polypeptide products with molecular masses of 8.7 and 7.6 kDa, respectively. The kleC operon contains four genes, kleC, kleD, kleE, and kleF, with predicted products of 9.2, 8.0, 12.2, and 11.3 kDa, respectively. To identify the polypeptide products, each gene was cloned downstream of the phage T7 phi 10 promoter and expressed in vivo in the presence of T7 RNA polymerase. A polypeptide product of the expected size was observed for all six kle genes. In addition, kleF expressed a second polypeptide of 6 kDa that most likely results from the use of a predicted internal translational start site. The kleA and kleC genes are each preceded by sequences resembling strong sigma 70 promoters. Primer extension analysis revealed that the putative kleA and kleC promoters are functional in E. coli and that transcription is initiated at the expected nucleotides. The abundance of transcripts initiated in vivo from both the kleA and kleC promoters was reduced in cells containing korA or korC. When korA and korC were present together, they appeared to act synergistically in reducing the level of transcripts from both promoters. The kleA and kleC promoter regions are highly homologous and contain two palindromic sequences (A and C) that are the predicted targets for KorA and KorC proteins. DNA binding studies showed that protein extracts from korA-containing E. coli cells specifically retarded the electrophoretic mobility of DNA fragments containing palindrome A. Extracts from korC-containing cells altered the mobility of DNA fragments containing palindrome C. These results show that KorA and KorC both act as repressors of the kleAand kleC promoters. In the absence of korA and korC, expression of the cloned kleA operon was lethal to E.coli cells, whereas the cloned kleC operon gave rise to slowly growing, unhealthy colonies. Both phenotypes depended on at least one structural gene in each operon, suggesting that the operons encode genes whose products interact with critical host functions required for normal growth and viability. Thus, the kilA, kilC, and kilE loci of RK2 constitute a cluster of at least 10 genes that are coregulated with the plasmid replication initiator and the conjugal transfer system. Their potential toxicity to the host cell indicates that RK2 is able to establish a variety of intimate plasmid-host interactions that may be important to its survival in nature.

Stability of r-microbes: stabilization of plasmid vectors by the partitioning function of broad-host-range plasmid RP4

The genes for biosynthesis of the biodegradable polymer poly-beta-hydroxybutyric acid (PHB) cloned from Alcaligenes eutrophus H16 were used for synthesis of PHB with recombinant Escherichia coli strains. It was recognized that the PHB-biosynthesis genes cause segregational instability to the plasmids used as vectors. Recombinant PHB-plasmids are rapidly lost from host cells and plasmid-free cells occur at high rates, even under conditions of selection for the plasmids. Cloning the partitioning region of plasmid RP4 onto such plasmids resulted in a high degree of stabilization. These par-stabilized recombinant PHB-plasmids could be maintained quite efficiently in batch cultivation experiments in the absence of any selection pressure.

Structure, function, and regulation of the kilB locus of promiscuous plasmid RK2

The kil-kor regulon of the self-transmissible, broad-host-range plasmid RK2 is a unique network with eight coregulated operons. Among the genes encoded by the kil-kor regulon are trfA, which encodes the replication initiator, and several kil loci (kilA, kilB, kilC, and kilE), each of which is lethal to the host cell in the absence of appropriate negative regulatory elements encoded by the korA, korB, korC, and korE determinants. We have proposed that the functions of the kil loci are related to RK2 maintenance or host range. Here, we report the nucleotide sequence of a 2.44-kb region that includes the lethal kilB determinant. We identified the first three genes of the kilB operon (designated klbA, klbB, and klbC), and we determined by deletion analysis that the host-lethal phenotype requires klbB. The predicted amino acid sequence of the 34,995-Da klbA product reveals a potential ATP-binding fold. The klbB product is predicted to be a membrane protein with a molecular mass of 15,012 Da with homology to the RK2 KlaC membrane protein encoded by the kilA operon. The amino acid sequence of the 12,085-Da klbC product contains a perfect match to the leucine zipper motif common to eukaryotic regulatory proteins. Primer extension analysis revealed unambiguously that transcription of the kilB operon begins 46 nucleotides upstream of klbA. No transcription was initiated from the sequence previously presumed by other investigators to be the kilB promoter. The abundance of kilB transcripts is reduced in the presence of KorB, consistent with the prediction that KorB acts at the level of transcription. A degenerate KorB-binding site that contains a perfect half-palindrome overlaps the kilB promoter, but this site is insufficient for regulation by KorB. The region containing a KorB-binding site located 183 bp upstream of the transcriptional start is required for regulation by KorB, indicating that KorB acts at a distance to regulate transcription of kilB. Our studies with the mutant plasmid pRP101, a transfer-defective derivative of the RK2-like plasmid RP4, demonstrated that the kilB operon includes the conjugal transfer and surface exclusion genes of the Tra2 region. Nucleotide sequence analysis revealed that the transposon Tn7 insertion in pRP101 is located in the klbC gene, and complementation analysis showed that this mutation has a strong polar effect on the expression of genes for conjugal transfer and surface exclusion located several kilobases downstream. A klbA mutant was constructed and found to be both transfer defective and complementable, thus, demonstrating a requirement was constructed and found to be both transfer defective and complementable, thus demonstrating a requirement for klbA product in plasmid transmissibility. These results have demonstrated a role for the kilB operon in conjugal transfer. The kil-kor regulon of RK2 is the only known example of plasmid-mediated coregulation of replication and transfer.

Definition of a minimal plasmid stabilization system from the broad-host-range plasmid RK2

The stable inheritance of the broad-host-range plasmid RK2 is due at least in part to functions within a region located at coordinates 32.8 to 35.9 kb, termed the RK2 par locus. This locus encodes four previously identified genes in two operons (parCBA and parD; M. Gerlitz, O. Hrabak, and H. Schwab, J. Bacteriol. 172:6194-6203, 1990, and R. C. Roberts, R. Burioni, and D. R. Helinski, J. Bacteriol. 172:6204-6216, 1990). The parCBA operon is functional in resolving plasmid multimers to monomers. Analysis of the plasmid stabilization capacity of deletions within this region, however, indicates that this multimer resolution operon is required for stabilization only in certain Escherichia coli strains and under specific growth conditions. The deletion analysis further allowed a redefinition of the minimal functional region as 790 bp in length, consisting of the parD gene (243 bp) and its promoter as well as sequences downstream of parD. This minimal region stabilizes an RK2-derived minireplicon in several different gram-negative bacteria and, at least in E. coli, in a vector-independent manner. By insertional mutagenesis, both the parD gene and downstream (3') regions were found to be required for plasmid stabilization. The downstream DNA sequence contained an open reading frame which was subsequently shown by transcriptional and translational fusions to encode a protein with a predicted size of 11,698 Da, designated ParE. Since the parDE operon requires the presence of the parCBA operon for efficient stabilization under certain growth conditions, the potential role of multimer resolution in plasmid stabilization was tested by substituting the ColE1 cer site for the parCBA operon. While the cer site did function to resolve plasmid multimers, it was not sufficient to restore stabilization activity to the parDE operon under growth conditions that require the parCBA operon for plasmid stability. This suggests that plasmid stabilization by the RK2 par locus relies on a complex mechanism, representing a multifaceted stabilization system of which multimer resolution is a conditionally dispensable component, and that the function(s) encoded by the parDE operon is essential.

A region of the broad-host-range plasmid RK2 causes stable in planta inheritance of plasmids in Rhizobium meliloti cells isolated from alfalfa root nodules

We demonstrate for the first time that the broad-host-range stabilization loci from plasmid RK2 cause total retention of plasmids in cells of Rhizobium meliloti during symbiosis with alfalfa. Two derivatives of plasmid RK2, pRK290 and a 7.3-kb mini-RK2 plasmid, were stabilized in R. meliloti cells isolated from root nodules by the insertion of a 3.2-kb DNA fragment or a smaller 0.8-kb DNA fragment derived from the RK2 stabilization region.

The region essential for efficient autonomous replication of pSa in Escherichia coli

Comparative analyses were made between plasmid pSa17, a deletion derivative of pSa that is capable of replicating efficiently in Escherichia coli and plasmid pSa3, a derivative that is defective for replication. By comparing the restriction maps of these two derivatives, the regions essential for replication and for stable maintenance of the plasmid were determined. A 2.5 kb DNA segment bearing the origin of DNA replication of pSa17 was sequenced. A 36 kDa RepA protein was encoded in the region essential for replication. Downstream of the RepA coding region was a characteristic sequence including six 17 bp direct repeats, the possible binding sites of RepA protein, followed by AT-rich and GC-rich sequences. Furthermore, an 8 bp incomplete copy of the 17 bp repeat was found in the promoter region of the repA gene. Based on the hypothesis that RepA protein binds to this partial sequence as well as to intact 17 bp sequences, an autoregulatory system for the synthesis of RepA protein may be operative. Another open reading frame (ORF) was found in the region required for the stability of the plasmid. The putative protein encoded in this ORF showed significant homology to several site-specific recombination proteins. A possible role of this putative protein in stable maintenance of the plasmid is discussed.

Isolation of phosphorylation-deficient mutants of the Rhizobium meliloti two-component regulatory protein, FixJ

Rhizobium meliloti FixL and FixJ are members of a symbiotically essential two-component system that regulates nitrogen-fixation genes in response to environmental oxygen concentrations. FixL is a membrane protein that is thought to relay information about oxygen availability to FixJ via a phosphotransfer mechanism. FixJ increases expression of the nifA and fixK genes by activating transcription of the nifA and fixK promoters (p-nifA and p-fixK, respectively). In this study, we examined the relationship between the in vivo activity of FixJ as a transcriptional regulator and its ability to be phosphorylated in vitro by the sensor FixL. FixJ mutants were isolated that showed decreased activity on p-nifA in Escherichia coli. Most of the FixJ mutant proteins also showed decreased activity on the fixK promoter. These mutants were analysed in R. meliloti for activity on p-nifA during vegetative growth, where similarities and differences were observed when compared with their phenotypes in E. coli. Three mutants showing significantly less activity in R. meliloti were examined for symbiotic activity in planta and were found to be ineffective. When these three mutant FixJ proteins were examined in vitro for their ability to be phosphorylated by FixL, two mutants were found to have a significantly decreased ability to accept phosphate from FixL. These findings are discussed in relation to signal transduction in the FixLJ system.

Transcription and autoregulation of the stabilizing functions of broad-host-range plasmid RK2 in Escherichia coli, Agrobacterium tumefaciens and Pseudomonas aeruginosa

The broad-host-range plasmid RK2 has been shown to encode several proteins important for its maintenance within bacterial populations of a number of Gram-negative bacteria. Their genes are organized into two operons: parCBA and parD. These operons have been proposed to be transcribed from two divergent promoters, p-parCBA and p-parD, located within a sequence of approximately 150 bases. In this report we identify and characterize the sequences required for regulated transcription from these promoters in Escherichia coli, Agrobacterium tumefaciens and Pseudomonas aeruginosa. Both of these promoters are repressed by their own gene products in the same manner in all three bacteria tested, with ParA functioning as the primary repressor of p-parCBA and ParD functioning as the repressor of p-parD. The binding regions of these proteins were determined through deletion analyses, DNA mobility shift assays, and an examination of the effect of mutations in this region. Based on these observations, the ParA protein appears to bind to either two inverted repeat or two direct repeat sequences, one downstream from the transcriptional initiation site and the other upstream of the p-parCBA -35 box. The ParD protein appears to bind to one inverted repeat sequence, located between the -35 and -10 boxes of p-parD.

The divergent promoters mediating transcription of the par locus of plasmid RP4 are subject to autoregulation

The partitioning region of broad-host-range plasmid RP4 contains four genes (parA, parB, parC, and parD) that encode products essential for partition activity. Two divergently arranged promoters located in the intercistronic region between parC and parD mediate transcription of these genes. The transcriptional initiation sites for both promoters were determined by primer extension. Transcriptional fusions were used to show that parA, parB, and parC are combined in an operon, while parD constitutes a separate transcription unit. Both parCBA (genes in order of transcription) and parD are negatively autoregulated at the level of transcription by the gene products of parA and parD, respectively. parD promoter mutants which have become insensitive to repression by parD were isolated. Comparison of wild type and the mutant parD promoter sequences indicated that three short repeats are likely involved in the negative regulation of this promoter. Potentially these sequence elements comprise target sites for the ParD protein.

Analysis of mutations in trfA, the replication initiation gene of the broad-host-range plasmid RK2

Plasmids with mutations in trfA, the gene encoding the replication initiation protein of the broad-host-range plasmid RK2, were isolated and characterized. Mutants identified from a nitrosoguanidine bank were defective in supporting the replication of a wild-type RK2 origin in Escherichia coli. Most of the mutations were clustered in a region of trfA corresponding to the carboxy-terminal quarter of the TrfA protein. 5' and 3' deletion mutants of trfA were also constructed. A C-terminal deletion of three amino acids of the Tr A protein was completely nonfunctional for RK2 replication. However, a deletion of 25 amino acids from the start of the 33-kDa TrfA protein was still competent for replication. Further characterization of the point and deletion trfA mutants in vivo revealed that a subset was capable of supporting RK2 replication in other gram-negative bacteria, including Pseudomonas putida, Agrobacterium tumefaciens, and Azotobacter vinelandii. Selected mutant TrfA proteins were partially purified and characterized in vitro. Velocity sedimentation analysis of these partially purified TrfA proteins indicated that the wild-type protein and all mutant TrfA proteins examined exist as dimers in solution. Results from in vitro replication assays corroborated the experimental findings in vivo. Gel retardation results clearly indicated that the point mutant TrfA-33:151S, which was completely defective in replication of an RK2 origin in all of the bacterial hosts tested in vivo, and a carboxy-terminal deletion mutant, TrfA-33:C delta 305, were not able to bind iterons in vitro. In addition to the partially defective or could not be distinguished from the wild-type protein in binding to the origin region. The mutant proteins with apparently normal DNA-binding activity in vitro either were inactive in all four gram-negative bacteria tested or exhibited differences in functionality depending on the host organism. These mutant TrfA proteins may be altered in the ability to interact with the replication proteins of the specific host bacterium.

Dissection of IncP conjugative plasmid transfer: definition of the transfer region Tra2 by mobilization of the Tra1 region in trans

We constructed a transfer system consisting of two compatible multicopy plasmids carrying the transfer regions Tra1 and Tra2 of the broad-host-range IncP plasmid RP4. In this system, the plasmid containing the Tra1 region with the origin of transfer (oriT) was transferred, whereas additional functions essential for the conjugative process were provided from the Tra2 plasmid in trans. The Tra2 region, as determined for matings between Escherichia coli cells, maps between coordinates 18.03 and 29.26 kb of the RP4 standard map. The section of Tra2 required for mobilization of the plasmid RSF1010 (IncQ) and the propagation of bacteriophages Pf3 and PRD1 appears to be the same as that needed for RP4 transfer. Tra2 regions of RP4 (IncP alpha) and R751 (IncP beta) are interchangeable, facilitating mobilization of the plasmid carrying the RP4 Tra1 region. The transfer frequencies of both systems are similar. Transcription of Tra2 proceeds clockwise relative to the standard map of RP4 and is probably initiated at a promoter region located upstream of trbB (kilB). From this promoter region the trfA operon and the Tra2 operon are likely to be transcribed divergently. A second potential promoter has been located immediately upstream of trbB (kilB). Plasmids encoding the functional Tra2 region can only be maintained stably in host cells in the presence of the RP4 regulation region carrying the korA-korB operon or part of it. This indicates the involvement of RP4 key regulatory functions that apparently are active not only in the control of replication but also in conjugation.

Conjugative transfer functions of broad-host-range plasmid RK2 are coregulated with vegetative replication

The kilB locus (which is unclonable in the absence of korB) of broad-host-range plasmid RK2 (60 kb) lies between the trfA operon (co-ordinates 16.4 to 18.2 kb), which encodes a protein essential for vegetative replication, and the Tra2 block of conjugative transfer genes (co-ordinates 20.0 to 27.0 kb). Promoter probe studies indicated that kilB is transcribed clockwise from a region containing closely spaced divergent promoters, one of which is the trfA promoter. The repression of both promoters by korB suggested that kilB may also play a role in stable maintenance of RK2. We have sequenced the region containing kilB and analysed it by deletion and insertion mutagenesis. Loss of the KilB+ phenotype does not result in decreased stability of mini RK2 plasmids. However insertion in ORFI (kilBI) of the region analysed results in a Tra- phenotype in plasmids which are otherwise competent for transfer, demonstrating that this locus is essential for transfer and is probably the first gene of the Tra2 region. From the kilBI DNA sequence KilBI is predicted to be 34995 Da, in line with M(r) = 36,000 observed by sodium dodecyl sulphate/polyacrylamide gel electrophoresis, and contains a type I ATP-binding motif. The purified product was used to raise antibody which allowed the level of KilBI produced from RK2 to be estimated at approximately 2000 molecules per bacterium. Protein sequence comparisons showed the highest homology score with VirB11, which is essential for the transfer of the Agrobacterium tumefaciens Ti plasmid DNA from bacteria to plant cells. The sequence similarity of both KilBI and VirB11 to a family of protein export functions suggested that KilBI may be involved in assembly of the surface-associated Tra functions. The data presented in this paper provide the first demonstration of coregulation of genes required for vegetative replication and conjugative transfer on a bacterial plasmid.

Molecular cloning and characterization of DNA from human intestinal spirochetes

HindIII cleaved human intestinal spirochete genomic DNA was cloned into the plasmid vector pBluescript. The inserts from three of these clones (pRB.C33, pRB.C47 and pRB.F11) successfully hybridized with DNA from the nine human intestinal spirochetes used in this study. The fourth insert (from clone pRB.A8) failed to hybridize with DNA from two of these isolates (HRM4 and HRM9), and, all four of the inserts hybridized with the M1 strain of swine intestinal spirochete Treponema innocens. Hybridization with DNA from the P18 strain of Treponema hyodysenteriae was observed only for the probe pRB.F11. No hybridization was detected with the human strain of Borrelia burgdorferi. With these probes we were thus able to demonstrate, in southern blot experiments, a restriction site polymorphism among the isolates of the human intestinal spirochetes we tested.

A gene near the plasmid pSa origin of replication encodes a nuclease

We have cloned and sequenced a gene (nuc) from the IncW plasmid pSa which shows amino acid sequence similarity to staphylococcal nuclease (EC 3.1.4.7) and to the parB locus of plasmid RP4. The 525 bp open reading frame encodes a 174-amino-acid potential polypeptide of 19.7 kDa. Expression of the gene was confirmed using an in vitro transcription-translation assay which produced a protein of identical size. Nuclease activity was demonstrated using DNA as the substrate in toluidine blue-DNA agar plates. The deduced amino acid sequence revealed a signal sequence, and TnphoA insertion within the open reading frame indicated that a portion of the protein is transported across the bacterial cell membrane.

Development of a lactococcal integration vector by using IS981 and a temperature-sensitive lactococcal replication region

A vector (pKMP10) capable of Campbell-like integration into the Lactococcus lactis subsp. lactis LM0230 chromosome via homologous recombination with chromosomal IS981 sequences was constructed from the replication region of lactococcal plasmid pSK11L, an internal fragment of IS981, and the erythromycin resistance gene and Escherichia coli replication origin of pVA891. The pSK11L replication region is temperature sensitive for maintenance in L. lactis subsp. lactis LM0230, resulting in loss of unintegrated pKMP10 during growth at greater than 37 degrees C. pKMP10 integrants made up 8 to 75% of LM0230(pKMP10) erythromycin-resistant cells following successive growth at 25 degrees C with selection, 39 degrees C without selection, and 39 degrees C with selection. pKMP10 integrants were also isolated from L. lactis subsp. lactis MG1363(pKMP10) but at a 10-fold-lower frequency (4%). No integrants were isolated form L. lactis subsp. lactis MMS368(pKMP10) (a Rec-deficient strain) or LM0230(pKMP1-E) (the corresponding plasmid lacking the IS981 fragment). Examination of 17 LM0230 integrants by Southern hybridization revealed pKMP10 integration into five different chromosomal sites. Four of the integration sites appeared to be chromosomal IS981 sequences, while one was an uncharacterized chromosomal sequence. The four IS981 integrants seemed to have pKMP10 integrated in a tandem repeat structure of undetermined length. Integrated pKMP10 was more stable (0 to 2% plasmid loss) than unintegrated pKMP10 (100% plasmid loss) when grown for 100 generations at 32 degrees C without selection.

Construction of a broad-host-range non-mobilizable stable vector carrying RP4 par-region

Plasmid pXL1635 was constructed from the already segregationally stable incP-derived pRK290. Plasmid pXL1635 should be suitable for industrial and environmental uses in Gram- bacteria since (i) it contains the par fragment from RP4 which increases its stability in Pseudomonas denitrificans, a cobalamin-producing and industrially used bacterium, and (ii) the RK2 oriT has been deleted, leading to a non-mobilizable plasmid.

Replication and temperature-sensitive maintenance functions of lactose plasmid pSK11L from Lactococcus lactis subsp. cremoris

The replication region of pSK11L, the lactose plasmid of Lactococcus lactis subsp. cremoris (L. cremoris) SK11, was isolated on a 14.8-kbp PvuII fragment by shotgun cloning into an Escherichia coli vector encoding erythromycin resistance and selection for erythromycin-resistant transformants of L. lactis subsp. lactis (L. lactis) LM0230. Deletion analysis and Tn5 mutagenesis of the resulting plasmid (pKMP1) further localized the replication region to a 2.3-kbp ScaI-SpeI fragment. DNA sequence analysis of this 2.3-kbp fragment revealed a 1,155-bp open reading frame encoding the putative replication protein, Rep. The replication origin was located upstream of rep and consisted of an 11-bp imperfect direct repeat and a 22-bp sequence tandemly repeated three and one-half times. The overall organization of the pSK11L replicon was remarkably similar to that of pCI305, suggesting that pSK11L does not replicate by the rolling-circle mechanism. Like pSK11L, pKMP1 was unstable in L. lactis LM0230. Deletion analysis allowed identification of several regions which appeared to contribute to the maintenance of pKMP1 in L. lactis LM0230. pKMP1 was significantly more stable in L. cremoris EB5 than in L. lactis LM0230 at all of the temperatures compared. This stability was lost by deletion of a 3.1-kbp PvuII-XbaI fragment which had no effect on stability in L. lactis LM0230. Other regions affecting stability in L. cremoris EB5 but not in L. lactis LM0230 were also identified. Stability assays conducted at various temperatures showed that pKMP1 maintenance was temperature sensitive in both L. lactis LM0230 and L. cremoris EB5, although the plasmid was more unstable in L. lactis LM0230. The region responsible for the temperature sensitivity phenotype in L. lactis LM0230 was tentatively localized to a 1.2-kbp ClaI-HindIII fragment which was distinct from the replication region of pSK11L. Our results suggest that the closely related L. lactis and L. cremoris subspecies behave differently regarding maintenance of plasmids.

Characterization of a region of the Enterococcus faecalis plasmid pAM beta 1 which enhances the segregational stability of pAM beta 1-derived cloning vectors in Bacillus subtilis

The nucleotide sequence of a 2.13-kb EcoRI-HindIII, pAM beta 1-derived fragment, isolated from the gram-positive cloning vector pHV1431, has been determined and shown to encode two ORFs. ORF H encodes for a protein of 23,930 Da which exhibits substantial homology to bacterial site-specific recombinases, particularly the resolvases of the gram-positive transposons Tn917 (30.3% identity) and Tn552 (31.6% identity) and the clostridial plasmid pIP404 (27.1% identity). The second ORF (I) is incomplete and encodes a polypeptide which has significant homology with Escherichia coli topoisomerase I (26.0% identity). Insertion of either the entire 2.13-kb EcoRI-HindIII fragment or a 0.73-kb EcoRI-DraI subfragment encoding only the resolvase into the pAM beta 1-based cloning vector pMTL500E causes a significant enhancement of segregational stability (from 6.5 X 10(-2) to 3.0-4.0 X 10(-3) plasmid loss per cell per generation). Improved segregational stability is mirrored by a reduction in plasmid polymerization. The introduction of a stop codon into the resolvase coding region negates its ability to promote segregational stability. It is proposed that the identified determinant stabilizes pAM beta 1-based vectors in Bacillus subtilis by maintaining the plasmid population in the monomeric state, thereby reducing the chances of producing plasmid-free segregants.

The kilA operon of promiscuous plasmid RK2: the use of a transducing phage (lambda pklaA-1) to determine the effects of the lethal klaA gene on Escherichia coli cells

The kil-kor regulon of promiscuous plasmid RK2 includes the replication initiator gene trfA and several potentially host-lethal kil loci (kilA, kilB, kilC, kilE), whose functions may be involved in plasmid maintenance or broad host range. The kilA locus consists of a single operon of three genes (klaA, klaB, klaC), each of which is lethal when expressed from the klaA promoter in the absence of repressors encoded by korA and korB. In this study, we examined the effects of the unregulated klaA gene on the host cell. Bacteriophage lambda was used to construct a transducing phage (lambda pklaA-1) that allows efficient introduction of the klaA gene into Escherichia coli. Cells lacking korA and korB (to allow uncontrolled expression of klaA) and expressing lambda repressor (to prevent phage lytic growth) are killed by lambda pklaA-1. Cell death is dependent on the klaA structural gene, independent of the SOS system of the host, and is prevented by the presence of korA and korB. lambda pklaA-1 was used to synchronously infect cells lacking korA and korB to determine the effects of klaA on the cells over time. The earliest effects, visible at two hours post-infection, are inhibition of growth of the culture, formation of elongated cells, and striking changes in the appearance of the outer membrane. After four to five hours, the viability of the culture declined sharply and macromolecular synthesis ceased. The distinct class of early events is consistent with the hypothesis that the KlaA polypeptide interacts with a specific target in the host cell.

Identification of a multimer resolution system involved in stabilization of the Salmonella dublin virulence plasmid pSDL2

The Salmonella dublin virulence plasmid pSDL2 is a low-copy-number plasmid that is highly conserved in its host. Deletion of the 8-kb EcoRI C fragment downstream of the virulence region leads to plasmid instability and formation of multimers. We identified a multimer resolution system in the EcoRI C fragment composed of a trans-acting resolvase gene and a cis-acting resolution site. The resolvase gene, rsd, maps within a 2-kb EcoRV fragment and appears to be part of a multicistronic unit together with at least two other genes of unknown function. The derived protein, 28.7-kDa in size, is almost identical to the D protein of miniF. The C-terminal region was shown to have substantial similarity to the conserved C-terminal domains of the site-specific recombinases of the integrase family. The cis-acting resolution site, crs, is located upstream of rsd within a 628-bp SmaI-HpaI fragment. It contains eight direct incomplete 17-bp repeats followed by a segment rich in indirect repeats, the latter being homologous to the oriV1 sequence of miniF. crs contains the crossover site for specific recombination and mediates bidirectional promoter activity. A replicative function in analogy to that of oriV1 of F could not be demonstrated. The multimer resolution system was shown to stabilize pACYC184 and is dependent on the recA-mediated formation of multimeric plasmids. Screening different Salmonella serovars with a pSDL2-specific recombination assay revealed that only strains harboring a virulence plasmid encode for resolvase activity. Our results suggest that site-specific recombination contributes to the stable inheritance of pSDL2 and other Salmonella virulence plasmids.

Structural, molecular, and genetic analysis of the kilA operon of broad-host-range plasmid RK2

The kil loci (kilA, kilB, kilC, and kilE) of incompatibility group P (IncP), broad-host-range plasmid RK2 were originally detected by their potential lethality to Escherichia coli host cells. Expression of the kil determinants is controlled by different combinations of kor functions (korA, korB, korC, and korE). This system of regulated genes, known as the kil-kor regulon, includes trfA, which encodes the RK2 replication initiator. The functions of the kil loci are unknown, but their coregulation with an essential replication function suggests that they have a role in the maintenance or host range of RK2. In this study, we have determined the nucleotide sequence of a 3-kb segment of RK2 that encodes the entire kilA locus. The region encodes three genes, designated klaA, klaB, and klaC. The phage T7 RNA polymerase-dependent expression system was use to identify three polypeptide products. The estimated masses of klaA and klaB products were in reasonable agreement with the calculated molecular masses of 28,407 and 42,156 Da, respectively. The klaC product is calculated to be 32,380 Da, but the observed polypeptide exhibited an apparent mass of 28 kDa on sodium dodecyl sulfate-polyacrylamide gels. Mutants of klaC were used to confirm that initiation of translation of the observed product occurs at the first ATG in the klaC open reading frame. Hydrophobicity analysis indicated that the KlaA and KlaB polypeptides are likely to be soluble, whereas the KlaC polypeptide was predicted to have four potential membrane-spanning domains. The only recognizable promoter sequences in the kilA region were those of the kilA promoter located upstream of klaA and the promoter for the korA-korB operon located just downstream of a rho-independent terminatorlike sequence following klaC. The transcriptional start sites for these promoters were determined by primer extension. Using isogenic sets of plasmids with nonpolar mutations, we found that klaA, klaB, and klaC are each able to express a host-lethal (Kil+) phenotype in the absence of kor functions. Inactivation of the kilA promoter causes loss of the lethal phenotype, demonstrating that all three genes are expressed from the kilA promoter as a multicistronic operon. We investigated two other phenotypes that have been mapped to the kilA region of RK2 or the closely related IncP plasmids RP1 and RP4: inhibition of conjugal transfer of IncW plasmids (fwB) and resistance to potassium tellurite. The cloned kilA operon was found to express both phenotypes, even in the presence of korA and korB, whose functions are known to regulate the kilA promoter. In addition, mutant and complementation analyses showed that the kilA promoter and the products of all three kla genes are necessary for expression of both phenotypes. Therefore, host lethality, fertility inhibition, and tellurite resistance are all properties of the kilA operon. We discuss the possible role of the kilA operon for RK2.

Iteron inhibition of plasmid RK2 replication in vitro: evidence for intermolecular coupling of replication origins as a mechanism for RK2 replication control

The broad-host-range plasmid RK2 and its derivatives are maintained in Gram-negative bacteria at a specific copy number that appears to be determined by a series of direct repeats (iterons) located at the RK2 replication origin and by the RK2 replication initiation protein. TrfA. An in vitro replication system was developed from Escherichia coli that is active with either the intact eight-iteron RK2 origin or a minimal five-iteron RK2 origin when purified TrfA protein is provided. Using this in vitro replication system, we have examined the mechanism(s) of copy-number control. It was found that two or more RK2 iterons present on a supercoiled compatible plasmid molecule are capable of specifically inhibiting in vitro the replication of either functional RK2 origin plasmid and that this inhibition is not overcome by adding increasing amounts of TrfA protein. A mutant TrfA protein, TrfA-33(cop254D), that increases the copy number of an RK2 origin in vivo exhibits replication kinetics and activity levels in this in vitro system similar to that of the wild-type protein. However, RK2 in vitro replication initiated by TrfA-33(cop254D) has a much reduced sensitivity to iteron inhibition. These data support a model for RK2 copy-number control that involves intermolecular coupling between TrfA-bound iterons.

Partitioning of broad-host-range plasmid RP4 is a complex system involving site-specific recombination

The broad-host-range plasmid RP4 encodes a highly efficient partitioning system (par) that was previously mapped within the 6.2-kb PstI C fragment. The essential functions were assigned to a region of 2.2 kb between fiwA and IS21 (IS8). On the basis of the nucleotide sequence data of the entire par locus and of in vitro and in vivo expression studies, three distinct loci encoding polypeptides of 9, 18, and 24 kDa were identified. Evidence for the expression of another polypeptide was found. A putative divergent promoter was localized in an intergenic region and is suggested to be responsible for transcription of these genes. It was found that the RP4 par region includes a function resolving plasmid dimers. The 24-kDa polypeptide is considered to function as a resolvase, since its predicted amino acid sequence shows homology to sequences of resolvases of the Tn3 family. Furthermore, palindromes present in the intergenic region containing the divergent promoter resemble repeat structures specific for res sites of Tn3-related transposons. However, it was found that dimer resolution itself was not sufficient for stabilization; additional functions, including the other two polypeptides, seemed to play an important role. These results suggested that RP4 contains a complex stabilization system involving resolution of plasmid dimers during cell division, thus ensuring the delivery of at least one copy to each daughter cell.