Electromicrobiology

Bioelectroanalytical Detection of Lactic Acid Bacteria

Lactic acid bacteria (LAB) are an industrial important group of organisms that are notable for their inability to respire without growth supplements. Recently described bioelectroanalytical detectors that can specifically detect and enumerate microorganisms depend on a phenomenon known as extracellular electron transport (EET) for effective detection. EET is often described as a type of microbial respiration, which logically excludes LAB from such a detection platform. However, members of the LAB have recently been described as electroactive with the ability to carry out EET, providing a timely impetus to revisit the utility of bioelectroanalytical detectors in LAB detection. Here, we show that an LAB, Enterococcus faecalis, is easily detected bioelectroanalytically using the defined substrate resorufin-β-d-galactopyranoside. Detection is rapid, ranging from 34 to 235 min for inoculum sizes between 107 and 104 CFU mL−1, respectively. We show that, although the signal achieved by Enterococcus faecalis is comparable to systems that rely on the respiratory EET strategies of target bacteria, E. faecalis is not dependent on the electrode for energy, and it is only necessary to capture small amounts of an organism’s metabolic energy to, in this case 1.6%, to achieve good detection. The results pave the way for new means of detecting an industrially important group of organisms, particularly in the food industry.

Sludge Derived Carbon Modified Anode in Microbial Fuel Cell for Performance Improvement and Microbial Community Dynamics

The conversion of activated sludge into high value-added materials, such as sludge carbon (SC), has attracted increasing attention because of its potential for various applications. In this study, the effect of SC carbonized at temperatures of 600, 800, 1000, and 1200 °C on the anode performance of microbial fuel cells and its mechanism are discussed. A pyrolysis temperature of 1000 °C for the loaded electrode (SC1000/CC) generated a maximum areal power density of 2.165 ± 0.021 W·m⁻² and a current density of 5.985 ± 0.015 A·m⁻², which is 3.017- and 2.992-fold that of the CC anode. The addition of SC improves microbial activity, optimizes microbial community structure, promotes the expression of c-type cytochromes, and is conducive to the formation of electroactive biofilms. This study not only describes a technique for the preparation of high-performance and low-cost anodes, but also sheds some light on the rational utilization of waste resources such as aerobic activated sludge.

Biofabrication and characterization of multispecies electroactive biofilms in stratified paper-based scaffolds

This work develops novel biofabrication and analysis platforms by creating innovative, paper-based 3-D systems that accurately recapitulate the structure, function, and physiology of living multispecies biofilms.

Progress and Challenges in Studying the Ecophysiology of Archaea

It has been less than two decades since the study of archaeal ecophysiology has become unshackled from the limitations of cultivation and amplicon sequencing through the advent of metagenomics. As a primer to the guide on producing archaeal genomes from metagenomes, we briefly summarize here how different meta'omics, imaging, and wet lab methods have contributed to progress in understanding the ecophysiology of Archaea. We then peer into the history of how our knowledge on two particularly important lineages was assembled: the anaerobic methane and alkane oxidizers, encountered primarily among Euryarchaeota, and the nanosized, mainly parasitic, members of the DPANN superphylum.

Quinones contained in wastewater as redox mediators for the synergistic removal of azo dye in microbial fuel cells

The present paper aimed to investigate the roles of quinones contained in wastewater and the enhanced effects on microbial fuel cells (MFCs) under different redox conditions. The feasibility of using wastewater rich in quinones to act as co-substrate and redox mediators (RMs) library to strengthen the synergistic removal of azo dye in MFCs was evaluated. The results demonstrated that quinones achieved enhanced effects on electricity generation and COD removal of MFC better at higher current intensity. The addition of pure quinone decreased electron transfer resistance (Rct) of MFCs from 4.76 Ω to 2.13 Ω under 1000 Ω resistance and 1.16 Ω-0.75 Ω under 50 Ω resistance. Meanwhile, higher coulombic efficiency was achieved. Compared with sodium acetate, using quinone-rich traditional Chinese medicine (TCM) wastewater as the co-substrate enhanced the synergistic removal of reactive red 2 (RR2) in MFCs from 79.58% to 92.45% during 24 h. RR2 was also degraded more thoroughly due to the accelerated electron transfer process mediated by RMs. Microbial community analysis demonstrated that the presence of quinone in TCM wastewater can enrich different exoelectrogens under varied redox conditions and thus influenced the enhanced effects on MFC. Metagenomic functional prediction results further indicated that the abundance of functional genes involved in carbohydrate metabolism, membrane transport metabolism, biofilm formation, and stress tolerance increased significantly in presence of RMs. Redundancy analyses revealed that RMs addition was the more important factor driving the variation of the microorganism community. This study revealed the potential effect of quinones as redox mediators on the bioelectrochemical system for pollutants removal.

Empowering Undergraduates to Fight Climate Change with Soil Microbes

The burning of fossil fuels to meet a growing demand for energy has created a climate crisis that threatens Earth's fragile ecosystems. While most undergraduate students are familiar with solar and wind energy as sustainable alternatives to fossil fuels, many are not aware of a climate solution right beneath their feet—soil-dwelling microbes! Microbial fuel cells (MFCs) harness energy from the metabolic activity of microbes in the soil to generate electricity. Recently, the coronavirus disease 2019 (COVID-19) pandemic transformed the traditional microbiology teaching laboratory into take-home laboratory kits and online modes of delivery, which could accommodate distance learning. This laboratory exercise combined both virtual laboratory simulations and a commercially available MFC kit to challenge undergraduate students to apply fundamental principles in microbiology to real-world climate solutions.

Thickness and roughness of transparent gold-palladium anodes have no impact on growth kinetics and yield coefficients of early-stage Geobacter sulfurreducens biofilms

Geobacter sulfurreducens is the model organism for electroactive microorganisms performing direct extracellular electron transfer and forming thick mature biofilm electrodes. Although numerous physiological properties of mature biofilm electrodes are deciphered, there is an extensive gap of knowledge on the early-stage biofilm formation. We have shown recently that transparent gold-palladium (AuPd) electrodes allow for analysis of early-stage biofilm formation using confocal laser scanning microscopy. Here we analysed the influence of thickness (ranging from 12.5 to 200 nm) and roughness of AuPd electrodes on physiological parameters of G. sulfurreducens early-stage biofilms. We show that when grown potentiostatically at -200 mV vs. Ag/ AgCl sat. KCl neither maximum current density (j_max of ∼ 80-150 µA cm^-2) nor lag time (lag t of ∼ 0.2-0.4 days) or single cell yield coefficients (Y_Ne of 1.43 × 10¹² cells mol_e-^-1) of the biofilms are influenced by the electrode preparation. This confirms the robustness of the experimental approach, which is an inevitable prerequisite for obtaining reliable results in follow-up experiments.

How bacteria use electric fields to reach surfaces

Electrotaxis is the property of cells to sense electric fields and use them to orient their displacement. This property has been widely investigated with eukaryotic cells but it remains unclear whether or not bacterial cells can sense an electric field. Here, a specific experimental set-up was designed to form microbial electroactive biofilms while differentiating the effect of the electric field from that of the polarised electrode surface. Application of an electric field during exposure of the electrodes to the inoculum was shown to be required for an electroactive biofilm to form afterwards. Similar biofilms were formed in both directions of the electric field. This result is attributed to the capacity of the cells to detect the K+ and Na+ ion gradients that the electric field creates at the electrode surface. This microbial property should now be considered as a key factor in the formation of electroactive biofilms and possible implications in the biomedical domain are discussed.

Evolution of Thermophilic Microbial Communities from a Deep-Sea Hydrothermal Chimney under Electrolithoautotrophic Conditions with Nitrate

Recent studies have shown the presence of an abiotic electrical current across the walls of deep-sea hydrothermal chimneys, allowing the growth of electroautotrophic microbial communities. To understand the role of the different phylogenetic groups and metabolisms involved, this study focused on electrotrophic enrichment with nitrate as electron acceptor. The biofilm density, community composition, production of organic compounds, and electrical consumption were monitored by FISH confocal microscopy, qPCR, metabarcoding, NMR, and potentiostat measurements. A statistical analysis by PCA showed the correlation between the different parameters (qPCR, organic compounds, and electron acceptors) in three distinct temporal phases. In our conditions, the Archaeoglobales have been shown to play a key role in the development of the community as the first colonizers on the cathode and the first producers of organic compounds, which are then used as an organic source by heterotrophs. Finally, through subcultures of the community, we showed the development of a greater biodiversity over time. This observed phenomenon could explain the biodiversity development in hydrothermal contexts, where energy sources are transient and unstable.

Electrical properties of outer membrane extensions from Shewanella oneidensis MR-1

Shewanella oneidensis MR-1 is a metal-reducing bacterium that is able to exchange electrons with solid-phase minerals outside the cell. These bacterial cells can produce outer membrane extensions (OMEs) that are tens of nanometers wide and several microns long. The capability of these OMEs to transport electrons is currently under investigation. Tubular chemically fixed OMEs from S. oneidensis have shown good dc conducting properties when measured in an air environment. However, no direct demonstration of the conductivity of the more common bubble-like OMEs has been provided yet, due to the inherent difficulties in measuring it. In the present work, we measured the electrical properties of bubble-like OMEs in a dry air environment by Scanning Dielectric Microscopy (SDM) in force detection mode. We found that at the frequency of the measurements (∼2 kHz), OMEs show an insulating behavior, with an equivalent homogeneous dielectric constant ε_OME = 3.7 ± 0.7 and no dephasing between the applied ac voltage and the measured ac electric force. The dielectric constant measured for the OMEs is comparable to that obtained for insulating supramolecular protein structures (ε_protein = 3-4), pointing towards a rich protein composition of the OMEs, probably coming from the periplasm. Based on the detection sensitivity of the measuring instrument, the upper limit for the ac longitudinal conductivity of bubble-like OMEs in a dry air environment has been set to σ_OME,ac < 10^-5 S m^-1, a value several orders of magnitude smaller than the dc conductivity measured in tubular chemically fixed OMEs. The lack of conductivity of bubble-like OMEs can be attributed to the relatively large separation between cytochromes in these larger OMEs and to the suppression of cytochrome mobility due to the dry environmental conditions.

Current Progress of Interfacing Organic Semiconducting Materials with Bacteria

Microbial bioelectronics require interfacing microorganisms with electrodes. The resulting abiotic/biotic platforms provide the basis of a range of technologies, including energy conversion and diagnostic assays. Organic semiconductors (OSCs) provide a unique strategy to modulate the interfaces between microbial systems and external electrodes, thereby improving the performance of these incipient technologies. In this review, we explore recent progress in the field on how OSCs, and related materials capable of charge transport, are being used within the context of microbial systems, and more specifically bacteria. We begin by examining the electrochemical communication modes in bacteria and the biological basis for charge transport. Different types of synthetic organic materials that have been designed and synthesized for interfacing and interrogating bacteria are discussed next, followed by the most commonly used characterization techniques for evaluating transport in microbial, synthetic, and hybrid systems. A range of applications is subsequently examined, including biological sensors and energy conversion systems. The review concludes by summarizing what has been accomplished so far and suggests future design approaches for OSC bioelectronics materials and technologies that hybridize characteristic properties of microbial and OSC systems.

Impact of anodophilic biofilm bioelectroactivity on the denitrification behavior of air-cathode microbial fuel cells

Generally, high bioelectroactivity of anodophilic biofilm favors high power generation of microbial fuel cell (MFC); however, it is not clear whether it can promote denitrification of MFC synchronously. In this study, we studied the impact of anodophilic biofilm bioelectroactivity on the denitrification behavior of air-cathode MFC (AC-MFC) in steady state and found that high bioelectroactivity of anodophilic biofilm not only favored high power generation of the AC-MFC, but also promoted the growth of denitrifers at the anodes and strengthened denitrification. Anodophilic biofilms of AC-MFC with various bioelectroactivity were acclimated at conditions of open circuit (OC), R_ext of 1000 Ω and 20 Ω (denoted as AC-MFC-OC, AC-MFC-1000Ω, and AC-MFC-20Ω, respectively) and performed for over 100 days. Electrochemical tests and microbial analysis results showed that the anode of the AC-MFC-20Ω delivered higher current response of both oxidation and denitrification and had higher abundance of electroactive bacteria than the AC-MFC-OC, AC-MFC-1000Ω, demonstrating a higher bioelectroactivity of the anodophilic biofilms. Moreover, these electroactive bacteria favored the accumulation of denitrifers, like Thauera and Alicycliphilus, probably by consuming trace oxygen through catalyzing oxygen reduction. The AC-MFC-20Ω not only delivered a 61.7% higher power than the AC-MFC-1000Ω, but also achieved a stable and high denitrification rate constant (k_DN ) of 1.9 h^-1 , which was 50% and 40% higher than that of the AC-MFC-OC and AC-MFC-1000Ω, respectively. It could be concluded that the high bioelectroactivity of the anodophilic biofilms not only favored high power generation of the AC-MFC, but also promoted the enrichment of denitrifers at the anodes and strengthened denitrification. This study provided an effective method for enhancing power generation and denitrification performance of the AC-MFC synchronously.

Electron Mediation and Photocurrent Enhancement in Dunalliela salina Driven Bio-Photo Electrochemical Cells

In recent years, finding alternatives for fossil fuels has become a major concern. One promising solution is microorganism-based bio-photo electrochemical cells (BPECs) that utilize photosynthetic solar energy conversion as an energy source while absorbing CO2 from the atmosphere. It was previously reported that in cyanobacterial-based BPECs, the major endogenous electron mediator that can transfer electrons from the thylakoid membrane photosynthetic complexes and external anodes is NADPH. However, the question of whether the same electron transfer mechanism is also valid for live eukaryotic microalgae, in which NADPH must cross both the chloroplast outer membrane and the cell wall to be secreted from the cell has remained elusive. In this work, we show that NADPH is also the major endogenous electron mediator in the microalgae Dunalliela salina (Ds). We show that the ability of Ds to tolerate high salinity enables the production of a photocurrent that is 5–6 times greater than previously reported for freshwater cyanobacterial-based BPECs in the presence or absence of exogenous electron mediators. Additionally, we show that the electron mediator Vitamin B1 can also function as an electron mediator enhancing photocurrent production. Finally, we show that the addition of both FeCN and NADP+ to Ds has a synergistic effect enhancing the photocurrent beyond the effect of adding each mediator separately.

Current-Driven Organic Electrochemical Transistors for Monitoring Cell Layer Integrity with Enhanced Sensitivity

In this progress report an overview is given on the use of the organic electrochemical transistor (OECT) as a biosensor for impedance sensing of cell layers. The transient OECT current can be used to detect changes in the impedance of the cell layer, as shown by Jimison et al. To circumvent the application of a high gate bias and preventing electrolysis of the electrolyte, in case of small impedance variations, an alternative measuring technique based on an OECT in a current-driven configuration is developed. The ion-sensitivity is larger than 1200 mV V^-1 dec^-1 at low operating voltage. It can be even further enhanced using an OECT based complementary amplifier, which consists of a p-type and an n-type OECT connected in series, as known from digital electronics. The monitoring of cell layer integrity and irreversible disruption of barrier function with the current-driven OECT is demonstrated for an epithelial Caco-2 cell layer, showing the enhanced ion-sensitivity as compared to the standard OECT configuration. As a state-of-the-art application of the current-driven OECT, the in situ monitoring of reversible tight junction modulation under the effect of drug additives, like poly-l-lysine, is discussed. This shows its potential for in vitro and even in vivo toxicological and drug delivery studies.

Comparative evaluation of fibrous artificial carbons and bamboo charcoal in terms of recovery of current from sewage wastewater

In this study, two fibrous carbon anodes (namely, pleated non-woven graphite (PNWG) and carbon brush (CB) made from artificial carbon) and bamboo charcoal (BC) were evaluated for current recovery from sewage wastewater. When these anodes were polarized at 0.2 V vs. Ag/AgCl in sewage wastewater, CB produced a maximum current of 2.9 A/m². This exceeded that produced by PNWG (1.5 A/m²) and BC (1.4 A/m²). The accumulative charge recovery achieved with CB was superior to those achieved with the other two (1.6- and 2.2-fold higher than that with PNWG and BC, respectively). During the cyclic voltammetry analysis, CB demonstrated the highest catalytic current with maximum potential in the range of -0.6 to 0.4 V vs. Ag/AgCl and the smallest anode resistance (0.20 Ωm²). Direct cell counting revealed that the fibrous anodes (CB and PNWG) attached most of the cells in the anodes (80%), whereas BC did not. In contrast, the proportion of Geobacter species, a representative electrogenic microorganism in the total bacteria, was observed to be similar among the three anodes (4.4-5.8%). The tubular microbial fuel cell (ø 5.0 cm) equipped with an air-chamber core wrapped with an anion exchange membrane (AEM) and the CB delivered a current of 1.8 A/m². This is higher than those reported in the existing literature for the same microbial fuel cell (MFC) configuration. This indicates that the alteration of the anode from planar to brush can contribute toward improving the current recovery through the air-cathode-AEM-MFC. The BC needs improvement to have more specific surface area, whereas it showed superiority in cost efficiency considering material and processing.

Wiring Up Along Electrodes for Biofilm Formation

Millimeter-length cables of bacteria were discovered growing along a graphite-rod electrode serving as an anode of a microbial electrolysis cell (MEC). The MEC had been inoculated with a culture of Fe-reducing microorganisms enriched from a polluted river sediment (Reconquista river, Argentina) and was operated at laboratory controlled conditions for 18 days at an anode poised potential of 240 mV (vs. Ag/AgCl), followed by 23 days at 480 mV (vs. Ag/AgCl). Anode samples were collected for scanning electron microscopy, phylogenetic and electrochemical analyses. The cables were composed of a succession of bacteria covered by a membranous sheath and were distinct from the known "cable-bacteria" (family Desulfobulbaceae). Apparently, the formation of the cables began with the interaction of the cells via nanotubes mostly located at the cell poles. The cables seemed to be further widened by the fusion between them. 16S rRNA gene sequence analysis confirmed the presence of a microbial community composed of six genera, including Shewanella, a well-characterized electrogenic bacteria. The formation of the cables might be a way of colonizing a polarized surface, as determined by the observation of electrodes extracted at different times of MEC operation. Since the cables of bacteria were distinct from any previously described, the results suggest that bacteria capable of forming cables are more diverse in nature than already thought. This diversity might render different electrical properties that could be exploited for various applications.

Bioelectricity production from sweat-activated germination of bacterial endospores

A microbial fuel cell is created that uses a bacterium's natural ability to revive from dormancy to provide on-demand power for next-generation wearable applications. In adverse conditions, Bacillus subtilis responds by becoming endospores that serve as a dormant biocatalyst embedded in a skin-mountable paper-based microbial fuel cell. When activated by nutrient-rich human sweat, the germinating bacteria produce enough electricity to operate small devices, such as the calculator that we operated to test our methodology. The spore germination is artificially accelerated by nutritious germinants, which are pre-loaded on the skin-contacting bottom layer of the device, absorb the released sweat, and deliver a mixture of the dissolved germinants and sweat to the spores. When the skin-mountable device is applied to the arm of a sweating volunteer, it can generate a maximum power density of 16.6 μW/cm2 through bacterial respiratory activity. A potential risk of bacteria leakage from the device is minimized by packaging with a small pore size paper so that bacterial spores and germinated cells cannot pass through. When three serially connected devices are integrated into a single on-chip platform and energized by sweat, a significantly enhanced power density of 56.6 μW/cm2 is generated, powering an electrical calculator. After three weeks of dormant storage, the device exhibits no significant decrease in electrical output when activated by sweat. After use, the device is easily incinerated without risking bacterial infection. This work demonstrates the promising potential of the spore-forming microbial fuel cell as a disposable and long storage life power source for next-generation wearable applications.

Electromicrobiology: the ecophysiology of phylogenetically diverse electroactive microorganisms

Electroactive microorganisms markedly affect many environments in which they establish outer-surface electrical contacts with other cells and minerals or reduce soluble extracellular redox-active molecules such as flavins and humic substances. A growing body of research emphasizes their broad phylogenetic diversity and shows that these microorganisms have key roles in multiple biogeochemical cycles, as well as the microbiome of the gut, anaerobic waste digesters and metal corrosion. Diverse bacteria and archaea have independently evolved cytochrome-based strategies for electron exchange between the outer cell surface and the cell interior, but cytochrome-free mechanisms are also prevalent. Electrically conductive protein filaments, soluble electron shuttles and non-biological conductive materials can substantially extend the electronic reach of microorganisms beyond the surface of the cell. The growing appreciation of the diversity of electroactive microorganisms and their unique electronic capabilities is leading to a broad range of applications.

Ferrimicrobium acidiphilum Exchanges Electrons With a Platinum Electrode via a Cytochrome With Reduced Absorbance Maxima at 448 and 605 nm

Ferrimicrobium acidiphilum is a Gram-positive member of the Actinobacteria phylum that can respire aerobically or anaerobically with soluble Fe(II) or Fe(III), respectively, in sulfuric acid at pH 1.5. Cyclic voltammetry measurements using intact F. acidiphilum at pH 1.5 produced fully reversible voltammograms that were highly reproducible. The maximum current observed with the anodic peak was considerably less than was the maximum current observed with the cathodic peak. This difference was attributed to the competition between the platinum electrode and the soluble oxygen for the available electrons that were introduced by the cathodic wave into this facultative aerobic organism. The standard reduction potential of the intact organism was determined to be 786 mV vs. the standard hydrogen electrode, slightly more positive than that of 735 mV that was determined for soluble iron at pH 1.5 using the same apparatus. Chronocoulometry measurements conducted at different cell densities revealed that the intact organism remained in close proximity to the working electrode during the measurement, whereas soluble ionic iron did not. When the cyclic voltammetry of intact F. acidiphilum was monitored using an integrating cavity absorption meter, the only small changes in absorbance that were detected were consistent with the participation of a cellular cytochrome with reduced absorbance peaks at 448 and 605 nm. The cytochrome that participated in the exchange of electrons between the intact organism and extracellular solid electrodes like platinum was the same cytochrome whose oxidation was previously shown to be rate-limiting when the organism respired aerobically on extracellular soluble iron.

Disentangling the syntrophic electron transfer mechanisms of Candidatus geobacter eutrophica through electrochemical stimulation and machine learning

Interspecies hydrogen transfer (IHT) and direct interspecies electron transfer (DIET) are two syntrophy models for methanogenesis. Their relative importance in methanogenic environments is still unclear. Our recent discovery of a novel species Candidatus Geobacter eutrophica with the genetic potential of IHT and DIET may serve as a model species to address this knowledge gap. To experimentally demonstrate its DIET ability, we performed electrochemical enrichment of Ca. G. eutrophica-dominating communities under 0 and 0.4 V vs. Ag/AgCl based on the presumption that DIET and extracellular electron transfer (EET) share similar metabolic pathways. After three batches of enrichment, Geobacter OTU650, which was phylogenetically close to Ca. G. eutrophica, was outcompeted in the control but remained abundant and active under electrochemical stimulation, indicating Ca. G. eutrophica's EET ability. The high-quality draft genome further showed high phylogenomic similarity with Ca. G. eutrophica, and the genes encoding outer membrane cytochromes and enzymes for hydrogen metabolism were actively expressed. A Bayesian network was trained with the genes encoding enzymes for alcohol metabolism, hydrogen metabolism, EET, and methanogenesis from dominant fermentative bacteria, Geobacter, and Methanobacterium. Methane production could not be accurately predicted when the genes for IHT were in silico knocked out, inferring its more important role in methanogenesis. The genomics-enabled machine learning modeling approach can provide predictive insights into the importance of IHT and DIET.

Electrochemical enrichment of haloalkaliphilic nitrate-reducing microbial biofilm at the cathode of bioelectrochemical systems

Electrotrophic microorganisms have not been well studied in extreme environments. Here, we report on the nitrate-reducing cathodic microbial biofilm from a haloalkaline environment. The biofilm enriched via electrochemical approach under 9.5 pH and 20 g NaCl/L salinity conditions achieved −43.5±7.2μA/cm2 current density and 49.5±13.2%nitrate reduction efficiency via partial and complete denitrification. Voltammetric characterization of the biocathodes revealed a redox center with −0.294±0.003V (vs. Ag/AgCl) formal potential putatively involved in the electron uptake process. The lack of soluble redox mediators and hydrogen-driven nitrate reduction suggests direct-contact cathodic electron uptake by the nitrate-reducing microorganisms in the enriched biofilm. 16S-rRNA amplicon sequencing of the cathodic biofilm revealed the presence of unreported Pseudomonas, Natronococcus, and Pseudoalteromonas spp. at 31.45%,11.82%, and 9.69% relative sequence abundances, respectively. The enriched nitrate-reducing microorganisms also reduced nitrate efficiently using soluble electron donors found in the lake sediments, thereby suggesting their role in N-cycling in such environments.

•

Enrichment of haloalkaliphilic nitrate-reducing microbial biofilm at the cathode

•

Cathodic reduction current corresponded to the nitrate reduction process

•

Pseudomonas, Natronococcus, and Pseudoalteromonas spp. enriched in the cathodic biofilm

•

Enriched culture reduced nitrate efficiently with soluble electron donor sources

Electricity-producing Staphylococcus epidermidis counteracts Cutibacterium acnes

Staphylococcus epidermidis (S. epidermidis) ATCC 12228 was incubated with 2% polyethylene glycol (PEG)-8 Laurate to yield electricity which was measured by a voltage difference between electrodes. Production of electron was validated by a Ferrozine assay. The anti-Cutibacterium acnes (C. acnes) activity of electrogenic S. epidermidis was assessed in vitro and in vivo. The voltage change (~ 4.4 mV) reached a peak 60 min after pipetting S. epidermidis plus 2% PEG-8 Laurate onto anodes. The electricity produced by S. epidermidis caused significant growth attenuation and cell lysis of C. acnes. Intradermal injection of C. acnes and S. epidermidis plus PEG-8 Laurate into the mouse ear considerably suppressed the growth of C. acnes. This suppressive effect was noticeably reversed when cyclophilin A of S. epidermidis was inhibited, indicating the essential role of cyclophilin A in electricity production of S. epidermidis against C. acnes. In summary, we demonstrate for the first time that skin S. epidermidis, in the presence of PEG-8 Laurate, can mediate cyclophilin A to elicit an electrical current that has anti-C. acnes effects. Electricity generated by S. epidermidis may confer immediate innate immunity in acne lesions to rein in the overgrowth of C. acnes at the onset of acne vulgaris.

Competition of two highly specialized and efficient acetoclastic electroactive bacteria for acetate in biofilm anode of microbial electrolysis cell

Maintaining functional stability of microbial electrolysis cell (MEC) treating wastewater depends on maintaining functional redundancy of efficient electroactive bacteria (EAB) on the anode biofilm. Therefore, investigating whether efficient EAB competing for the same resources (electron donor and acceptor) co-exist at the anode biofilm is key for the successful application of MEC for wastewater treatment. Here, we compare the electrochemical and kinetic properties of two efficient acetoclastic EAB, Geobacter sulfurreducens (GS) and Desulfuromonas acetexigens (DA), grown as monoculture in MECs fed with acetate. Additionally, we monitor the evolution of DA and GS in co-culture MECs fed with acetate or domestic wastewater using fluorescent in situ hybridization. The apparent Monod kinetic parameters reveal that DA possesses higher jmax (10.7 ± 0.4 A/m2) and lower KS, app (2 ± 0.15 mM) compared to GS biofilms (jmax: 9.6 ± 0.2 A/m2 and KS, app: 2.9 ± 0.2 mM). Further, more donor electrons are diverted to the anode for respiration in DA compared to GS. In acetate-fed co-culture MECs, DA (98% abundance) outcompete GS for anode-dependent growth. In contrast, both EAB co-exist (DA: 55 ± 2%; GS: 24 ± 1.1%) in wastewater-fed co-culture MECs despite the advantage of DA over GS based on kinetic parameters alone. The co-existence of efficient acetoclastic EAB with high current density in MECs fed with wastewater is significant in the context of functional redundancy to maintain stable performance. Our findings also provide insight to future studies on bioaugmentation of wastewater-fed MECs with efficient EAB to enhance performance.

Liposoluble quinone promotes the reduction of hydrophobic mineral and extracellular electron transfer of Shewanella oneidensis MR-1

A large number of reaction systems are composed of hydrophobic interfaces and microorganisms in natural environment. However, it is not clear how microorganisms adjust their breathing patterns and respond to hydrophobic interfaces. Here, Shewanella oneidensis MR-1 was used to reduce ferrihydrite of a hydrophobic surface. Through Fe(II) kinetic analysis, it was found that the reduction rate of hydrophobic ferrihydrite was 1.8 times that of hydrophilic one. The hydrophobic surface of the mineral hinders the way the electroactive microorganism uses the water-soluble electron mediator riboflavin for indirect electron transfer and promotes MR-1 to produce more liposoluble quinones. Ubiquinone can mediate electron transfer at the hydrophobic interface. Ubiquinone-30 (UQ-6) increases the reduction rate of hydrophobic ferrihydrite from 38.5 ± 4.4 to 52.2 ± 0.8 μM·h⁻¹. Based on the above experimental results, we propose that liposoluble electron mediator ubiquinone can act on the extracellular hydrophobic surface, proving that the metabolism of hydrophobic minerals is related to endogenous liposoluble quinones. Hydrophobic modification of minerals encourages electroactive microorganisms to adopt differentiated respiratory pathways. This finding helps in understanding the electron transfer behavior of the microbes at the hydrophobic interface and provides new ideas for the study of hydrophobic reactions that may occur in systems, such as soil and sediment.

•

Extracellular electron transfer can be regulated by wettability of mineral surface

•

Hydrophobic surface hinders the transport of water-soluble mediator riboflavin

•

Ubiquinone can mediate extracellular electron transfer at the hydrophobic interface

Developing microbial communities containing a high abundance of exoelectrogenic microorganisms using activated carbon granules

Microorganisms that can transfer electrons outside their cells are useful in a range of wastewater treatment and remediation technologies. Conventional methods of enriching exoelectrogens are cost-prohibitive (e.g., controlled-potential electrodes) or lack specificity (e.g., soluble electron acceptors). In this study a low-cost and simple approach to enrich exoelectrogens from a mixed microbial inoculum was investigated. After the method was validated using the exoelectrogen Geobacter sulfurreducens, microorganisms from a pilot-scale biological activated carbon (BAC) filter were subjected to incubations in which acetate was provided as the electron donor and granular activated carbon (GAC) as the electron acceptor. The BAC-derived community oxidized acetate and reduced GAC at a capacity of 1.0 mmol e^- (g GAC)^-1. After three transfers to new bottles, acetate oxidation rates increased 4.3-fold, and microbial morphologies and GAC surface coverage became homogenous. Although present at <0.01% in the inoculum, Geobacter species were significantly enriched in the incubations (up to 96% abundance), suggesting they were responsible for reducing the GAC. The ability to quickly and effectively develop an exoelectrogenic microbial community using GAC may help initiate and/or maintain environmental systems that benefit from the unique metabolic capabilities of these microorganisms.

Microbial fuel cells: a comprehensive review for beginners

Microbial fuel cells (MFCs) have shown immense potential as a one-stop solution for three major sustainability issues confronting the world today-energy security, global warming and wastewater management. MFCs represent a cross-disciplinary platform for research at the confluence of the natural and engineering sciences. The diversity of variables influencing performance of MFCs has garnered research interest across varied scientific disciplines since the beginning of this century. The increasing number of research publications has made it necessary to keep track of work being carried out by research groups across the globe and consolidate significant findings on a regular basis. Review articles are often the nodal points for beginners who are required to undertake an exploratory survey of literature to identify a suitable research problem. This 'review of reviews' is a ready-reckoner that directs readers to relevant reviews and research articles reporting significant developments in MFC research in the last two decades. The article also highlights the areas needing research attention which when addressed could take this technology a few more steps closer to practical implementation.

Cytochromes in Extracellular Electron Transfer in Geobacter

Extracellular electron transfer (EET) is an important biological process in microbial physiology as found in dissimilatory metal oxidation/reduction and interspecies electron transfer in syntrophy in natural environments. EET also plays a critical role in microorganisms relevant to environmental biotechnology in metal-contaminated areas, metal corrosion, bioelectrochemical systems, and anaerobic digesters. Geobacter species exist in a diversity of natural and artificial environments. One of the outstanding features of Geobacter species is the capability of direct EET with solid electron donors and acceptors, including metals, electrodes, and other cells. Therefore, Geobacter species are pivotal in environmental biogeochemical cycles and biotechnology applications. Geobacter sulfurreducens, a representative Geobacter species, has been studied for direct EET as a model microorganism. G. sulfurreducens employs electrically conductive pili (e-pili) and c-type cytochromes for the direct EET. The biological function and electronics applications of the e-pili have been reviewed recently, and this review focuses on the cytochromes. Geobacter species have an unusually large number of cytochromes encoded in their genomes. Unlike most other microorganisms, Geobacter species localize multiple cytochromes in each subcellular fraction, outer membrane, periplasm, and inner membrane, as well as in the extracellular space, and differentially utilize these cytochromes for EET with various electron donors and acceptors. Some of the cytochromes are functionally redundant. Thus, the EET in Geobacter is complicated. Geobacter coordinates the cytochromes with other cellular components in the elaborate EET system to flourish in the environment.

Microbial Electrochemical Oxidation of Anaerobic Digestion Effluent From Treating HTC Process Water

Hydrothermal carbonization (HTC) is a promising technology for chemical and material synthesis. However, HTC produces not only valuable solid coal-materials but also yields process water (PW) with high chemical oxygen demand (COD) that requires extensive treatment. Anaerobic digestion (AD) has been used for initial treatment of HTC-PW, but the AD effluent is still high in COD and particles. Here, we show that microbial electrochemical technologies (MET) can be applied for COD removal from AD effluent of HTC-PW. Bioelectrochemical systems (BES) treating different shares of AD effluent from HTC-PW exhibited similar trends for current production. Thereby, maximum current densities of 0.24 mA cm−2 and COD removal of 65.4 ± 4.4% were reached (n = 3). Microbial community analysis showed that the genus Geobacter dominated anode biofilm and liquid phase of all reactors indicating its central role for COD oxidation and current generation.

Quorum sensing shaped microbial consortia and enhanced hydrogen recovery from waste activated sludge electro-fermentation on basis of free nitrous acid treatment

In this study, the feasibility of free nitrous acid (FNA) pretreatment coupled with quorum sensing (QS) was investigated to enhance hydrogen recovery from waste activated sludge (WAS) via electro-fermentation (EF). 3-oxo-hexanoyl-homoserine lactone (3OC6-HSL), as the signal molecule, was only added in the first three cycles of sludge inoculation at the phase of microbial electrolysis cells (MECs) startup. Results showed that QS combined FNA (AHL-FMEC) enabled highest hydrogen yield and current (4.3 mg/g VSS and 4.5 mA), while that generated from sole FNA/QS treated WAS (FMEC/AHL-RMEC) were only 3.5/3.0 mg/g VSS and 1.5/1.5 mA, respectively. Fourier transform infrared (FT-IR) spectra illustrated the effective conversion of organics in AHL-FMEC, the utilization efficiencies of proteins and carbohydrates achieved to 75.0% and 79.7%, respectively. Besides, the internal resistance decreased from 34.5 Ω (FMEC) to 22.9 Ω (AHL-RMEC), further to 18.0 Ω, indicating the promoted bioelectrochemical activity of electroactive bacteria (EAB) in AHL-FMEC. Correspondingly, both EAB (21.7%), e.g., Geobacter (9.3%) and Pseudomonas (3.2%) and anaerobic fermentation bacteria (AFB, 28.6%), e.g., Proteiniclasticum (14.2%) and Petrimonas (3.6%) enriched to peaks in AHL-FMEC. Moreover, molecular ecological network (MEN) analysis revealed the underling relationships among AFB, EAB and homo-acetogen in EF system, suggesting the possible cooperative QS has been constructed. The results obtained in this study may provide a new insight for efficient hydrogen recovery from electro-fermentation of WAS.

Miniature microbial solar cells to power wireless sensor networks

Conventional wireless sensor networks (WSNs) powered by traditional batteries or energy storage devices such as lithium-ion batteries and supercapacitors have challenges providing long-term and self-sustaining operation due to their limited energy budgets. Emerging energy harvesting technologies can achieve the longstanding vision of self-powered, long-lived sensors. In particular, miniature microbial solar cells (MSCs) can be the most feasible power source for small and low-power sensor nodes in unattended working environments because they continuously scavenge power from microbial photosynthesis by using the most abundant resources on Earth; solar energy and water. Even with low illumination, the MSC can harvest electricity from microbial respiration. Despite the vast potential and promise of miniature MSCs, their power and lifetime remain insufficient to power potential WSN applications. In this overview, we will introduce the field of miniature MSCs, from early breakthroughs to current achievements, with a focus on emerging techniques to improve their performance. Finally, challenges and perspectives for the future direction of miniature MSCs to self-sustainably power WSN applications will be given.

A staged representation electrochemical stimulated strategy to regulate intracellular reducing power for improving succinate production by Escherichia coli AFP111

BACKGROUND

Escherichia coli AFP111 was previously engineered for succinate production by eliminating byproducts of synthesis pathways. Still, the succinate yield is limited due to the insufficient NADH supplement, when fed with glucose. Microbial electrolysis cell (MEC) allows microorganisms to perform unbalanced fermentation by establishing polarized cathode interaction.

METHODS AND RESULTS

In this study, a cathode electrode was used as an additional electron donor to improve succinate synthesis by E. coli AFP111. In MEC with -0.65 V (vs. Ag/AgCl) poised on cathode electrode, 95.72% electrons were transferred into cells via neutral red (NR), and the ratio of NADH/NAD⁺ increased by 2.5-fold. Meanwhile, compared with the control experiment, the value of oxidation-reduction potential (ORP) changed from -240 to -265 mV in MEC, which was beneficial for NADH generation. During two-stage fermentation (no potential growth stage followed by electric stimulation) in MEC, succinate yield was increased by 29.09% (the final yield was 0.71 g g^-1 ), and glucose consumption rate was enhanced by 36.22%. In addition, the carbon flux was pumped to succinate and pyruvate metabolism was enhanced.

CONCLUSION AND IMPLICATIONS

Staged representation of electrochemical stimulated strategy is effective for succinate producing in engineered E. coli by regulating intracellular reducing power, which provides a new concept for producing reduced metabolite in unbalanced fermentation.

Microbial corrosion of metals: The corrosion microbiome

Microbially catalyzed corrosion of metals is a substantial economic concern. Aerobic microbes primarily enhance Fe⁰ oxidation through indirect mechanisms and their impact appears to be limited compared to anaerobic microbes. Several anaerobic mechanisms are known to accelerate Fe⁰ oxidation. Microbes can consume H₂ abiotically generated from the oxidation of Fe⁰. Microbial H₂ removal makes continued Fe⁰ oxidation more thermodynamically favorable. Extracellular hydrogenases further accelerate Fe⁰ oxidation. Organic electron shuttles such as flavins, phenazines, and possibly humic substances may replace H₂ as the electron carrier between Fe⁰ and cells. Direct Fe⁰-to-microbe electron transfer is also possible. Which of these anaerobic mechanisms predominates in model pure culture isolates is typically poorly documented because of a lack of functional genetic studies. Microbial mechanisms for Fe⁰ oxidation may also apply to some other metals. An ultimate goal of microbial metal corrosion research is to develop molecular tools to diagnose the occurrence, mechanisms, and rates of metal corrosion to guide the implementation of the most effective mitigation strategies. A systems biology approach that includes innovative isolation and characterization methods, as well as functional genomic investigations, will be required in order to identify the diagnostic features to be gleaned from meta-omic analysis of corroding materials. A better understanding of microbial metal corrosion mechanisms is expected to lead to new corrosion mitigation strategies. The understanding of the corrosion microbiome is clearly in its infancy, but interdisciplinary electrochemical, microbiological, and molecular tools are available to make rapid progress in this field.

Weak electricity stimulates biological nitrate removal of wastewater: Hypothesis and first evidences

Nitrate pollution in water is a worldwide health and environmental concern. Biological nitrate removal of wastewater is widely used countering eutrophication of water bodies; however it could be troublesome and expensive when influent carbon source is insufficient. Here we present a novel process, the microbial fuel cell (MFC)-resistance-type electrical stimulation denitrification process (RtESD) using microbial weak electricity originated from the wastewater, to enhance nitrate removal. Results show that the optimal nitrate dependent denitrification rate (0.027 mg N/L·h) and nitrate removal efficiency (98.1%) can be achieved; partial autotrophic denitrification was enhanced in RtESD under stimulation of 0.2 V of microbial weak electricity (MWE). Aromatic proteins also increased in the presence of 0.2 V MWE stimulation according to three-dimensional excitation-emission matrix (3D-EEM) fluorescence spectroscopy profiles, indicating that electron transfer could be improved in the case of MWE stimulation. Furthermore, the microbial community structure and diversity analysis results demonstrated that MWE stimulation inhibited the heterotrophic denitrifying bacteria and activated the autotrophic denitrifying bacteria in RtESD. Two hypotheses, enhancement of electron transfer and improvement of microorganism activity, were proposed regarding to the MWE stimulated pathways. This study provided a promising method utilizing MWE derived from wastewater to improve the denitrification rate and removal efficiency of nitrate-containing wastewater treatment processes.

Microorganisms in sediment microbial fuel cells: Ecological niche, microbial response, and environmental function

A sediment microbial fuel cell (SMFC) is a device that harvests electrical energy from sediments rich in organic matter. SMFCs have been attracting increasing amounts of interest in environmental remediation, since they are capable of providing a clean and inexhaustible source of electron donors or acceptors and can be easily controlled by adjusting the electrochemical parameters. The microorganisms inhabiting sediments and the overlying water play a pivotal role in SMFCs. Since the SMFC is applied in an open environment rather than in an enclosed chamber, the effects of the environment on the microbes should be intense and the microbial community succession should be extremely complex. Thus, this review aims to provide an overview of the microorganisms in SMFCs, which few previous review papers have reported. In this study, the anodic and cathodic niches for the microorganisms in SMFCs are summarized, how the microbial population and community interact with the SMFC environment is discussed, a new microbial succession strategy called the electrode stimulation succession is proposed, and recent developments in the environmental functions of SMFCs are discussed from the perspective of microorganisms. Future studies are needed to investigate the electrode stimulation succession, the environmental function and the electron transfer mechanism in order to boost the application of SMFCs for power generation and environmental remediation.

Bioelectrochemical Fixation of Nitrogen to Extracellular Ammonium by Pseudomonas stutzeri

Diazotrophs can produce bioavailable nitrogen from inert N₂ gas by bioelectrochemical nitrogen fixation (e-BNF), which is emerging as an energy-saving and highly selective strategy for agriculture and industry. However, current e-BNF technology is impeded by requirements for NH₄⁺ assimilation inhibitors to facilitate intracellular ammonia secretion and precious metal catalysts to generate H₂ as the energy-carrying intermediate. Here, we initially demonstrate inhibitor- and catalystless extracellular NH₄⁺ production by the diazotroph Pseudomonas stutzeri A1501 using an electrode as the sole electron donor. Multiple lines of evidence revealed that P. stutzeri produced 2.32 ± 0.25 mg/liter extracellular NH₄⁺ at a poised potential of -0.3 V (versus standard hydrogen electrode [SHE]) without the addition of inhibitors or expensive catalysts. The electron uptake mechanism was attributed to the endogenous electron shuttle phenazine-1-carboxylic acid, which was excreted by P. stutzeri and mediated electron transfer from electrodes into cells to directly drive N₂ fixation. The faradaic efficiency was 20% ± 3%, which was 2 to 4 times that of previous e-BNF attempts using the H₂-mediated pathway. This study reports a diazotroph capable of producing secretable NH₄⁺ via extracellular electron uptake, which has important implications for optimizing the performance of e-BNF systems and exploring the novel nitrogen-fixing mode of syntrophic microbial communities in the natural environment. IMPORTANCE Ammonia greatly affects global ecology, agriculture, and the food industry. Diazotrophs with an enhanced capacity of extracellular NH₄⁺ excretion have been proven to be more beneficial to the growth of microalgae and plants, whereas most previously reported diazotrophs produce intracellular organic nitrogen in the absence of chemical suppression and genetic manipulation. Here, we demonstrate that Pseudomonas stutzeri A1501 is capable of extracellular NH₄⁺ production without chemical suppression or genetic manipulation when the extracellular electrode is used as the sole electron donor. We also reveal the electron uptake pathway from the extracellular electron-donating partner to P. stutzeri A1501 via redox electron shuttle phenazines. Since both P. stutzeri A1501 and potential electron-donating partners (such as electroactive microbes and natural semiconductor minerals) are abundant in diverse soils and sediments, P. stutzeri A1501 has broader implications on the improvement of nitrogen fertilization in the natural environment.

Genome-scale mutant fitness reveals versatile c-type cytochromes in Shewanella oneidensis MR-1

Shewanella has been widely investigated for its metabolic versatility and use of a large number of extracellular electron acceptors. Many c-type cytochromes are responsible for this diversity, mainly in condition-specific fashions. By using genome-scale mutant fitness data, we studied which genes (particularly c-type cytochromes) were used to coordinate various electron transfer processes in the present work. First, by integrating fitness profiles with protein-protein interaction (PPI) networks, we showed that the genes with a high total fitness value were generally more important in PPI networks than those with low fitness values. Then, we identified genes that are important across many experiments, and further fitness analysis confirmed five versatile c-type cytochromes: ScyA (SO0264), PetC (SO0610), CcoP (SO2361), CcoO (SO2363) and CytcB (SO4666), which are considered to be crucial in most experimental conditions. Finally, we demonstrated a mediating role in the periplasm for the less-reported CytcB by combining protein structure, subcellular localization and disordered region analysis. Comparative genome analysis further revealed that it is distinctive in Shewanella species. Collectively, these results suggest that periplasmic electron transfer processes are more diverse and flexible than previously reported, giving insight for further experimental studies of Shewanella oneidensis MR-1.

The electrode potential determines the yield coefficients of early-stage Geobacter sulfurreducens biofilm anodes

Geobacter sulfurreducens is the model for electroactive microorganisms (EAM). EAM can use solid state terminal electron acceptors (TEA) including anodes via extracellular electron transfer (EET). Yield coefficients relate the produced cell number or biomass to the oxidized substrate or the reduced TEA. These data are not yet sufficiently available for EAM growing at anodes. Thus, this study provides information about kinetics as well as yield coefficients of early-stage G. sulfurreducens biofilms using anodes as TEA at the potentials of -200 mV, 0 mV and +200 mV (vs. Ag/AgCl sat. KCl). The selected microorganism was therefore cultivated in single and double chamber batch reactors on graphite or AuPd anodes. Interestingly, whereas the lag time and maximum current density within 12 days of growth differed, the anode potential does not influence the coulombic efficiency and the formal potential of the EET, which remains constant for all the experiments at ~ -300 to -350 mV. We demonstrated for the first time that the anode potential has a strong influence on single cell yield coefficients which ranged from 2.69 × 10¹² cells mol_e-^-1 at -200 mV and 1.48 × 10¹² cells mol_e-^-1 at 0 mV to 2.58 × 10¹¹ cells mol_e-^-1 at +200 mV in single chamber reactors and from 1.15 × 10¹² cells mol_e-^-1 at -200 mV to 8.98× 10¹¹ cells mol_e-^-1 at 0 mV in double chamber reactors. This data can be useful for optimization and scaling-up of primary microbial electrochemical technologies.

Combined bioaugmentation with electro-biostimulation for improved bioremediation of antimicrobial triclocarban and PAHs complexly contaminated sediments

Haloaromatic antimicrobial triclocarban (TCC) is an emerging refractory contaminant that commonly coexisted with conventional contaminants such as polycyclic aromatic hydrocarbons (PAHs). TCC may negatively affect the metabolic activity of sediment microorganisms and persist in environment; however, remediation methods that relieve the TCC inhibitory effect in sediments remain unknown. Here, a novel electro-biostimulation and bioaugmentation combined remediation system was proposed by the simultaneous introduction of a TCC-degrading Ochrobactrum sp. TCC-2 and electrode into the TCC and PAHs co-contaminated sediments. Results indicated the PAHs and TCC degradation efficiencies of the combined system were 2.9-3.0 and 4.6 times respectively higher than those of the control group (no electro-biostimulation and no bioaugmentation treatments). The introduced strain TCC-2 and the enriched electroactive bacteria and PAHs degraders (e.g. Desulfobulbus, Clostridium, and Paenarthrobacter) synergistically contributed to the accelerated degradation of PAHs and TCC. The preferential elimination of the TCC inhibitory effect through bioaugmentation treatment could restore microbial functions by increasing the functional gene abundances related to various metabolic processes. This study offers new insights into the response of sediment functional communities to TCC stress, electro-biostimulation and bioaugmentation operations and provides a promising system for the enhanced bioremediation of the PAHs and TCC co-contaminated sediments.

NADPH performs mediated electron transfer in cyanobacterial-driven bio-photoelectrochemical cells

Previous studies have shown that live cyanobacteria can produce photocurrent in bio-photoelectrochemical cells (BPECs) that can be exploited for clean renewable energy production. Electron transfer from cyanobacteria to the electrochemical cell was proposed to be facilitated by small molecule(s) mediator(s) whose identity (or identities) remain unknown. Here, we elucidate the mechanism of electron transfer in the BPEC by identifying the major electron mediator as NADPH in three cyanobacterial species. We show that an increase in the concentration of NADPH secreted into the external cell medium (ECM) is obtained by both illumination and activation of the BPEC. Elimination of NADPH in the ECM abrogates the photocurrent while addition of exogenous NADP⁺ significantly increases and prolongs the photocurrent production. NADP⁺ is thus the first non-toxic, water soluble electron mediator that can functionally link photosynthetic cells to an energy conversion system and may serve to improve the performance of future BPECs.

•

NADPH is the electron mediator in cyanobacterial bio-photoelectrochemical cells

•

Operation of the electrochemical cell induces NADPH release from cyanobacteria

•

Addition of exogenous NADP⁺ to cyanobacteria enhances photocurrent production

•

NADPH is released by different fresh or sea water cyanobacterial species

Effect of waterproof breathable membrane based cathodes on performance and biofilm microbiomes in bioelectrochemical systems

A novel method for fabricating air-cathodes was developed by assembling an activated carbon (AC) catalyst together with a waterproof breathable membrane (WBM) and stainless steel mesh (SSM) to reduce manufacturing costs of bioelectrochemical systems (BESs). WBMs made of different materials were tested in the assembly, including a hybrid of polypropylene and polyolefin (PPPO), polyethylene (PE), and polyurethane (PU), and compared against poly tetrafluoroethylene (PTFE)-based cathodes. Results showed that the maximum power density of the activated carbon-stainless steel mesh-polyurethane (AC@SSM/PU) assembly was 2.03 W/m² while that of conventional carbon cloth cathode assembly (Pt@CC/PTFE) was 1.51 W/m². Compared to conventional cathode fabrication, AC@SSM/PU had a much lower cost and simpler manufacturing process. Illumina Miseq sequencing of 16S rRNA gene amplicons indicated that microbiomes were substantially different between anode and cathode biofilms. There was also a difference in the community composition between different cathode biofilms. The predominant population in the anode biofilms was Geobacter (38-75% relative abundance), while Thauera and Pseudomonas dominated the cathode biofilms. The results demonstrated that different types of air-cathodes influenced the microbial community assembly on the electrodes.

Intrinsically Conductive Microbial Nanowires for 'Green' Electronics with Novel Functions

Intrinsically conductive protein nanowires, microbially produced from inexpensive, renewable feedstocks, are a sustainable alternative to traditional nanowire electronic materials, which require high energy inputs and hazardous conditions/chemicals for fabrication and can be highly toxic. Pilin-based nanowires can be tailored for specific functions via the design of synthetic pilin genes to tune wire conductivity or introduce novel functionalities. Other microbially produced nanowire options for electronics may include cytochrome wires, curli fibers, and the conductive fibers of cable bacteria. Proof-of-concept protein nanowire electronics that have been successfully demonstrated include biomedical sensors, neuromorphic devices, and a device that generates electricity from ambient humidity. Further development of applications will require interdisciplinary teams of engineers, biophysicists, and synthetic biologists.

Impacts of conductive materials on microbial community during syntrophic propionate oxidization for biomethane recovery

Propionate is one of the most important intermediates in anaerobic digestion, and its degradation requires a syntrophic partnership between propionate-oxidizing bacteria and hydrogenotrophic methanogens. Anaerobic digestion efficiency can be improved by direct interspecies electron transfer (DIET) through conductive materials. This study aimed to investigate the effects of DIET on syntrophic propionate oxidization under room temperature (20°C) and reveal the syntrophic partners. Firstly, conventional anaerobic consortium and conductive material-enriched consortium were tested for DIET under high H₂ partial pressure. The latter supplemented with granular activated carbon (GAC) can mitigate H₂ inhibition through DIET. Secondly, a DIET consortium was enriched for testing GAC and magnetite, both showed DIET facilitation. Microbial communities in GAC- and magnetite-supplemented reactors were similar. Syntrophic propionate-oxidizing bacteria, for example, Smithella (3.9%-9.9%) and a genus from the family Syntrophaceae (1.9%-3.6%) and methanogens Methanobacterium (30.3%-75.2%), Methanolinea (8.5%-25.2%), Methanosaeta (11.4%-36.7%), and Candidatus Methanofastidiosum (3.6%-6.6%), were predominant. Functional genes for cell mobility and membrane transport (3.3% and 9.5% in control reactor) increased with GAC (3.7% and 11.1%, respectively) and magnetite (3.7% and 10.9%, respectively) addition. Syntrophic propionate-oxidizing bacteria and methanogenesis partners were revealed by co-occurrence network, for example, Methanobacterium with Smithella, Syntrophobacter, Dechloromonas, and Trichococcus, signifying the importance of the syntrophic partnership in DIET environment. PRACTITIONER POINTS: DIET improved syntrophic propionate oxidization under room temperature condition (20°C). Microbial communities were similar for GAC- and magnetite-supplemented reactors, different with control reactor. Syntrophic propionate-oxidizing bacteria and methanogenesis partners were revealed by co-occurrence network. Methanobacterium and Smithella, Syntrophobacter, Dechloromonas, and Trichococcus were correlated.

Anode Modification as an Alternative Approach to Improve Electricity Generation in Microbial Fuel Cells

Sustainable production of electricity from renewable sources by microorganisms is considered an attractive alternative to energy production from fossil fuels. In recent years, research on microbial fuel cells (MFCs) technology for electricity production has increased. However, there are problems with up-scaling MFCs due to the fairly low power output and high operational costs. One of the approaches to improving energy generation in MFCs is by modifying the existing anode materials to provide more electrochemically active sites and improve the adhesion of microorganisms. The aim of this review is to present the effect of anode modification with carbon compounds, metallic nanomaterials, and polymers and the effect that these modifications have on the structure of the microbiological community inhabiting the anode surface. This review summarizes the advantages and disadvantages of individual materials as well as possibilities for using them for environmentally friendly production of electricity in MFCs.

Ignoring social distancing: advances in understanding multi-species bacterial interactions

Almost every ecosystem on this planet is teeming with microbial communities made of diverse bacterial species. At a reductionist view, many of these bacteria form pairwise interactions, but, as the field of view expands, the neighboring organisms and the abiotic environment can play a crucial role in shaping the interactions between species. Over the years, a strong foundation of knowledge has been built on isolated pairwise interactions between bacteria, but now the field is advancing toward understanding how cohabitating bacteria and natural surroundings affect these interactions. Use of bottom-up approaches, piecing communities together, and top-down approaches that deconstruct communities are providing insight on how different species interact. In this review, we highlight how studies are incorporating more complex communities, mimicking the natural environment, and recurring findings such as the importance of cooperation for stability in harsh environments and the impact of bacteria-induced environmental pH shifts. Additionally, we will discuss how omics are being used as a top-down approach to identify previously unknown interspecies bacterial interactions and the challenges of these types of studies for microbial ecology.

Potential biofilm control strategies for extended spaceflight missions

Biofilms, surface-adherent microbial communities, are associated with microbial fouling and corrosion in terrestrial water-distribution systems. Biofilms are also present in human spaceflight, particularly in the Water Recovery System (WRS) on the International Space Station (ISS). The WRS is comprised of the Urine Processor Assembly (UPA) and the Water Processor Assembly (WPA) which together recycles wastewater from human urine and recovered humidity from the ISS atmosphere. These wastewaters and various process streams are continually inoculated with microorganisms primarily arising from the space crew microbiome. Biofilm-related fouling has been encountered and addressed in spacecraft in low Earth orbit, including ISS and the Russian Mir Space Station. However, planned future missions beyond low Earth orbit to the Moon and Mars present additional challenges, as resupplying spare parts or support materials would be impractical and the mission timeline would be in the order of years in the case of a mission to Mars. In addition, future missions are expected to include a period of dormancy in which the WRS would be unused for an extended duration. The concepts developed in this review arose from a workshop including NASA personnel and representatives with biofilm expertise from a wide range of industrial and academic backgrounds. Here, we address current strategies that are employed on Earth for biofilm control, including antifouling coatings and biocides and mechanisms for mitigating biofilm growth and damage. These ideas are presented in the context of their applicability to spaceflight and identify proposed new topics of biofilm control that need to be addressed in order to facilitate future extended, crewed, spaceflight missions.

Characterization of Electrogenic Gut Bacteria

While electrogenic, or electricity-producing, Gram-negative bacteria predominantly found in anaerobic habitats have been intensively explored, the potential of Gram-positive microbial electrogenic capability residing in a similar anoxic environment has not been considered. Because Gram-positive bacteria contain a thick non-conductive cell wall, they were previously believed to be very weak exoelectrogens. However, with the recent discovery of electrogenicity by Gram-positive pathogens and elucidation of their electron-transfer pathways, significant and accelerated attention has been given to the discovery and characterization of these pathways in the members of gut microbiota. The discovery of electrogenic bacteria present in the human gut and the understanding of their electrogenic capacity opens up possibilities of bacterial powered implantable batteries and provide a novel biosensing platform to monitor human gastrointestinal health. In this work, we characterized microbial extracellular electron-transfer capabilities and capacities of five gut bacteria: Staphylococcus aureus, Enterococcus faecalis, Streptococcus agalactiae, Lactobacillus reuteri, and Lactobacillus rhamnosus. A 21-well paper-based microbial fuel cell array with enhanced sensitivity was developed as a powerful yet simple screening method to accurately and simultaneously characterize bacterial electrogenicity. S. aureus, E. faecalis, and S. agalactiae exhibited distinct electrogenic capabilities, and their power generations were comparable to that of the well-known Gram-negative exoelectrogen, Shewanella oneidensis. Importantly, this system was used to begin a large-scale transposon screen to examine the genes involved in electrogenicity by the human pathobiont S. aureus.