Ectopic bone formation induced by biodegradable hydrogels incorporating bone morphogenetic protein

Delivery of osteoinductive growth factors from degradable PEG hydrogels influences osteoblast differentiation and mineralization

Degradable poly(ethylene glycol) (PEG) hydrogels with varying mass loss profiles were investigated to assess their applicability as delivery vehicles for osteoinductive growth factors in bone tissue engineering. Protein release is readily controlled by changes in both the structure (i.e., macromer concentration) and chemistry (i.e., number of degradable units) of the starting macromer. In vitro studies indicate an increase in total protein levels, alkaline phosphatase, and mineralization by osteoblasts cultured in the presence of osteoinductive growth factors compared to cells cultured with standard media. When growth factors are delivered from a 25 wt% hydrogel, a significant increase in both alkaline phosphatase and mineralization was seen after 3 weeks of culture over growth factor delivery in a bolus fashion. Additionally, gene expression levels of both osteocalcin and type I collagen were higher at early timepoints when growth factors were released from hydrogels. These results indicate that growth factors remain active after photoencapsulation, that the sustained delivery of growth factors alters various markers of osteoblastic differentiation, and that these networks could be useful as delivery vehicles for growth factors in bone tissue engineering. Finally, ectopic bone formation was present in subcutaneous rat tissue after implantation of hydrogel networks loaded with osteoinductive growth factors.

Triphasic release model for multilayered gelatin coatings that can recreate growth factor profiles during wound healing

Multilayered gelatin coatings were created to mimic growth factor profiles that normally occur during fracture healing. A model was developed to relate crosslinking and loading of individual layers to protein release. Modeling was simplified by dividing release profiles into three phases. The diffusion-controlled phase was determined by calculating periods of constant diffusivity for each homogeneous layer within devices. Diffusivity was a power law function of crosslinking. Fick's second law of diffusion was then used to determine release during the diffusion-controlled phase. Secondary diffusivity was determined by summing resistances of each successive homogeneous layer. The initial burst phase was defined as events proceeding the diffusion-controlled phase. Percentage of drug burst was a linear function of crosslinking. Release during the degradation-controlled phase, events following diffusion-controlled phase, was estimated based on first order hydrolysis of crosslinks. The model predicted time-variant release of differently labeled protein measured experimentally, and it can be used to design coatings to recreate the cascade of biomolecules that determine natural bone repair.

Slow and continuous application of human recombinant bone morphogenetic protein via biodegradable poly(lactide-co-glycolide) foamspheres

Bone morphogenetic proteins (BMPs) are multifunctional cytokines that were originally identified as molecules that induce bone and cartilage formation in vivo. In order to increase the efficacy of this potent protein for application in medicine, a carrier system is needed to retain the BMP at the preferred site. Here we present and characterize a slow-release carrier system for pure human recombinant (rh)BMP. The large porous microspheres, called 'foamspheres', are biodegradable, because they consist of poly(lactide-co-glycolide) acids and release loaded rhBMP slowly and continuously. In vivo studies in rodents revealed that rhBMP-loaded foamspheres increased the thickness of the calvarial bone of rats by 222%. When the same amount of rhBMP was applied via a gelatine-based hydrogel, the increase in bone height was only 66%. Thus, the carrier system for rhBMP is an important factor for the efficacy of BMPs.

Effect of recombinant human bone morphogenetic protein-2 on bone regeneration and osseointegration of dental implants

Recombinant human bone morphogenetic protein-2 (rhBMP-2) induced bone regeneration and osseointegration was evaluated in bony defects created within the hollow chamber of endosseous dental implants in 14 foxhound dogs. Bilateral extractions of mandibular premolars were performed and surgical implantation of 104 hollow cylinder implants followed after 8 weeks of healing. Experimental implants had their hollow chamber filled with 20 microg of rhBMP-2 delivered with a bovine collagen carrier, whereas the control implants had their apical chamber left empty. Dogs were followed for 2, 4, 8 and 12 weeks. Histomorphometric evaluation and immunohistochemical analysis were performed. Minimal bone was regenerated at 2 weeks for both groups. At 4 weeks, bone fill averaged 23.48% for the rhBMP-2 and 5.98% for the control group (P<0.05). At 8 weeks, mean bone fill was 20.94% and 7.75% for the rhBMP-2 and the controls, respectively (P<0.05). At 12 weeks, mean bone fill was 31.39% and 24.31% for the rhBMP-2 and control implants, respectively (P>0.05). Bone-implant contact (BIC) increased for both groups over time and at 8 weeks the rhBMP-2 BIC value was 18.65% and for the control 7.22% (P<0.05). At 12 weeks, the BIC was 43.78% and 21.05% for the rhBMP-2 and the control group, respectively (P<0.05). Immunohistochemical staining for type II collagen was positive only for parts of the collagen carrier and formation of cartilaginous intermediate was not observed in any of the specimens. The results suggest that, in confined defects adjacent to dental implants, rhBMP-2 can induce bone regeneration in close apposition to the implant surface.

An immuno-light- and electron-microscopic study of the expression of bone morphogenetic protein-2 during the process of ectopic bone formation in the rat

Immunolocalization of endogenous bone morphogenetic protein-2 (BMP-2) was investigated during the process of ectopic bone formation induced by recombinant human BMP-2 (rhBMP-2). Pellets consisting of 5 microg of rhBMP-2 and 6 mg of atelopeptide type I collagen (AC) were implanted into the calf muscles of 6-week-old rats. On days 7, 10, 14, 21 and 28 after implantation, tissue specimens were removed and examined immunohistochemically by light and electron microscopy after incubation with anti-BMP-2 monoclonal antibodies. Immunolocalization by light microscopy showed BMP-2 in chondrocytes at the pellet rim on days 7 and 10, in osteocyte-like cells in the chondroid matrix on day 14, and in osteocytes in the newly formed bone on days 21 and 28 after implantation. Ultrastructurally, on days 7 and 10 after implantation, immunolabelling for BMP-2 was aggregated in vesicle-like matrices released from mature chondrocytes in the chondroid matrix. On day 14, immunolabelling against BMP-2 had accumulated in vesicle-like matrices embedded in the calcified cartilage, in the cytoplasmic vacuoles of chondroclasts absorbing the matrix, and at the resorption surface of the calcified cartilage. On days 21 and 28, BMP-2 immunolabelling was seen in the osteoid layer and osteocyte lacunae. These results suggest that the chondrocytes and osteocytes induced by rhBMP-2 produce endogenous BMP-2. It seems that part of the endogenous BMP-2 that accumulated in the chondroid matrix was absorbed by chondroclasts and then participated in the osteoblastic differentiation of immature mesenchymal cells. This study indicates that, in addition to the implanted exogenous rhBMP-2, endogenous BMP-2 plays an important part in the maintenance of the bone-formation cascade during ectopic osteoinduction.

Growth factor delivery for tissue engineering

A tissue-engineered implant is a biologic-biomaterial combination in which some component of tissue has been combined with a biomaterial to create a device for the restoration or modification of tissue or organ function. Specific growth factors, released from a delivery device or from co-transplanted cells, would aid in the induction of host parenchymal cell infiltration and improve engraftment of co-delivered cells for more efficient tissue regeneration or ameliorate disease states. The characteristic properties of growth factors are described to provide a biological basis for their use in tissue engineered devices. The principles of polymeric device development for therapeutic growth factor delivery in the context of tissue engineering are outlined. A review of experimental evidence illustrates examples of growth factor delivery from devices such as microparticles, scaffolds, and encapsulated cells, for their use in the application areas of musculoskeletal tissue, neural tissue, and hepatic tissue.

Growth factor delivery for tissue engineering

A tissue-engineered implant is a biologic-biomaterial combination in which some component of tissue has been combined with a biomaterial to create a device for the restoration or modification of tissue or organ function. Specific growth factors, released from a delivery device or from co-transplanted cells, would aid in the induction of host parenchymal cell infiltration and improve engraftment of co-delivered cells for more efficient tissue regeneration or ameliorate disease states. The characteristic properties of growth factors are described to provide a biological basis for their use in tissue engineered devices. The principles of polymeric device development for therapeutic growth factor delivery in the context of tissue engineering are outlined. A review of experimental evidence illustrates examples of growth factor delivery from devices such as microparticles, scaffolds, and encapsulated cells, for their use in the application areas of musculoskeletal tissue, neural tissue, and hepatic tissue.

Accelerated tissue regeneration through incorporation of basic fibroblast growth factor-impregnated gelatin microspheres into artificial dermis

The objective of this study was to evaluate the effect of incorporation of basic fibroblast growth factor (bFGF)-impregnated gelatin microspheres into an artificial dermis on the regeneration of dermis-like tissues. When used in the free form in vivo, bFGF cannot induce sufficient wound healing activity, because of its short half-life. Therefore, sustained release of bFGF was achieved by impregnation into biodegradable gelatin microspheres. A radioisotope study revealed that incorporation of bFGF-impregnated gelatin microspheres significantly prolonged in vivo retention of bFGF in the artificial dermis. Artificial dermis with incorporated bFGF-impregnated gelatin microspheres or bFGF in solution was implanted into full-thickness skin defects on the back of guinea pigs (1.5 cm x 1.5 cm) (n = 4). Incorporation of bFGF into the artificial dermis accelerated fibroblast proliferation and capillary formation in a dose-dependent manner. However, the accelerated effects were more significant with the incorporation of bFGF-impregnated gelatin microspheres than with free bFGF at doses of 50 microg or higher. We conclude that the gelatin microsphere is a promising tool to accelerate bFGF-induced tissue regeneration in artificial dermis.

Bone regeneration by transforming growth factor beta1 released from a biodegradable hydrogel

This paper describes the sustained release of transforming growth factor beta1 (TGF-beta1) from a biodegradable hydrogel based on polyion complexation for the enhancement of bone regeneration activity. Basic TGF-beta1 was adsorbed onto the biodegradable hydrogel of acidic gelatin with an isoelectric point of 5.0 by an electrostatic interaction. The TGF-beta1 could not be adsorbed onto basic gelatin. When acidic gelatin hydrogels incorporating 125I-labeled TGF-beta1 were implanted into the back subcutis of mice, the radioactivity decreased with time and the in vivo retention of TGF-beta1 was prolonged with a decrease in the water content of hydrogels. The higher the water content of hydrogels, the faster their biodegradation. The in vivo retention of TGF-beta1 correlated well with that of gelatin hydrogels, indicating that TGF-beta1 was released from the gelatin hydrogel as a result of hydrogel biodegradation. The ability of TGF-beta1-incorporated into acidic gelatin hydrogels to induce bone regeneration was evaluated in a rabbit calvarial defect model. Eight weeks after treatment, the gelatin hydrogels with water contents of 90 and 95 wt% induced significantly high bone regeneration compared with those with lower and higher water contents and free TGF-beta1. This indicates that the sustained release of TGF-beta1 from the hydrogel with suitable in vivo degradability is necessary to effectively enhance its osteoinductive function. Rapid hydrogel degradation will result in a retention time of TGF-beta1 which is too short to induce bone regeneration. It is possible that the slow degradation of the hydrogel physically blocked TGF-beta1-induced bone regeneration at the skull defect. It can be concluded that the gelatin hydrogel is a promising matrix of TGF-beta1 release to induce skull bone regeneration.