Proximal femoral structure and the prediction of hip fracture in men: a large prospective study using QCT

Advances in imaging approaches to fracture risk evaluation

Fragility fractures are a growing problem worldwide, and current methods for diagnosing osteoporosis do not always identify individuals who require treatment to prevent a fracture and may misidentify those not a risk. Traditionally, fracture risk is assessed using dual-energy X-ray absorptiometry, which provides measurements of areal bone mineral density at sites prone to fracture. Recent advances in imaging show promise in adding new information that could improve the prediction of fracture risk in the clinic. As reviewed herein, advances in quantitative computed tomography (QCT) predict hip and vertebral body strength; high-resolution HR-peripheral QCT (HR-pQCT) and micromagnetic resonance imaging assess the microarchitecture of trabecular bone; quantitative ultrasound measures the modulus or tissue stiffness of cortical bone; and quantitative ultrashort echo-time MRI methods quantify the concentrations of bound water and pore water in cortical bone, which reflect a variety of mechanical properties of bone. Each of these technologies provides unique characteristics of bone and may improve fracture risk diagnoses and reduce prevalence of fractures by helping to guide treatment decisions.

Focal osteoporosis defects play a key role in hip fracture

BACKGROUND

Hip fractures are mainly caused by accidental falls and trips, which magnify forces in well-defined areas of the proximal femur. Unfortunately, the same areas are at risk of rapid bone loss with ageing, since they are relatively stress-shielded during walking and sitting. Focal osteoporosis in those areas may contribute to fracture, and targeted 3D measurements might enhance hip fracture prediction. In the FEMCO case-control clinical study, Cortical Bone Mapping (CBM) was applied to clinical computed tomography (CT) scans to define 3D cortical and trabecular bone defects in patients with acute hip fracture compared to controls. Direct measurements of trabecular bone volume were then made in biopsies of target regions removed at operation.

METHODS

The sample consisted of CT scans from 313 female and 40 male volunteers (158 with proximal femoral fracture, 145 age-matched controls and 50 fallers without hip fracture). Detailed Cortical Bone Maps (c.5580 measurement points on the unfractured hip) were created before registering each hip to an average femur shape to facilitate statistical parametric mapping (SPM). Areas where cortical and trabecular bone differed from controls were visualised in 3D for location, magnitude and statistical significance. Measures from the novel regions created by the SPM process were then tested for their ability to classify fracture versus control by comparison with traditional CT measures of areal Bone Mineral Density (aBMD). In women we used the surgical classification of fracture location ('femoral neck' or 'trochanteric') to discover whether focal osteoporosis was specific to fracture type. To explore whether the focal areas were osteoporotic by histological criteria, we used micro CT to measure trabecular bone parameters in targeted biopsies taken from the femoral heads of 14 cases.

RESULTS

Hip fracture patients had distinct patterns of focal osteoporosis that determined fracture type, and CBM measures classified fracture type better than aBMD parameters. CBM measures however improved only minimally on aBMD for predicting any hip fracture and depended on the inclusion of trabecular bone measures alongside cortical regions. Focal osteoporosis was confirmed on biopsy as reduced sub-cortical trabecular bone volume.

CONCLUSION

Using 3D imaging methods and targeted bone biopsy, we discovered focal osteoporosis affecting trabecular and cortical bone of the proximal femur, among men and women with hip fracture.

Technical Note: Cortical thickness and density estimation from clinical CT using a prior thickness-density relationship

PURPOSE

Cortical thickness and density are critical components in determining the strength of bony structures. Computed tomography (CT) is one possible modality for analyzing the cortex in 3D. In this paper, a model-based approach for measuring the cortical bone thickness and density from clinical CT images is proposed.

METHODS

Density variations across the cortex were modeled as a function of the cortical thickness and density, location of the cortex, density of surrounding tissues, and imaging blur. High resolution micro-CT data of cadaver proximal femurs were analyzed to determine a relationship between cortical thickness and density. This thickness-density relationship was used as prior information to be incorporated in the model to obtain accurate measurements of cortical thickness and density from clinical CT volumes. The method was validated using micro-CT scans of 23 cadaver proximal femurs. Simulated clinical CT images with different voxel sizes were generated from the micro-CT data. Cortical thickness and density were estimated from the simulated images using the proposed method and compared with measurements obtained using the micro-CT images to evaluate the effect of voxel size on the accuracy of the method. Then, 19 of the 23 specimens were imaged using a clinical CT scanner. Cortical thickness and density were estimated from the clinical CT images using the proposed method and compared with the micro-CT measurements. Finally, a case-control study including 20 patients with osteoporosis and 20 age-matched controls with normal bone density was performed to evaluate the proposed method in a clinical context.

RESULTS

Cortical thickness (density) estimation errors were 0.07 ± 0.19 mm (-18 ± 92 mg/cm(3)) using the simulated clinical CT volumes with the smallest voxel size (0.33 × 0.33 × 0.5 mm(3)), and 0.10 ± 0.24 mm (-10 ± 115 mg/cm(3)) using the volumes with the largest voxel size (1.0 × 1.0 × 3.0 mm(3)). A trend for the cortical thickness and density estimation errors to increase with voxel size was observed and was more pronounced for thin cortices. Using clinical CT data for 19 of the 23 samples, mean errors of 0.18 ± 0.24 mm for the cortical thickness and 15 ± 106 mg/cm(3) for the density were found. The case-control study showed that osteoporotic patients had a thinner cortex and a lower cortical density, with average differences of -0.8 mm and -58.6 mg/cm(3) at the proximal femur in comparison with age-matched controls (p-value < 0.001).

CONCLUSIONS

This method might be a promising approach for the quantification of cortical bone thickness and density using clinical routine imaging techniques. Future work will concentrate on investigating how this approach can improve the estimation of mechanical strength of bony structures, the prevention of fracture, and the management of osteoporosis.

Diagnostic devices for osteoporosis in the general population: A systematic review

INTRODUCTION

A diagnostic gap exists in the current dual photon X-ray absorptiometry (DXA) based diagnostic approach to osteoporosis. Other diagnostic devices have been developed, but no comprehensive review concerning the applicability of these diagnostic devices for population-based screening have been performed.

MATERIAL AND METHODS

A systematic review of Embase, Medline and the Cochrane Central Register for Controlled Trials was performed for population-based studies that focused on technical methods that could either indicate bone mineral density (BMD) by DXA, substitute for DXA in prediction of fracture risk, or that could have an incremental value in fracture prediction in addition to DXA. Quality of included studies was rated by QUADAS 2.

RESULTS

Many other technical devices have been tested in a population-based setting. Five studies aiming to indicate BMD and 17 studies aiming to predict fractures were found. Overall, the latter studies had higher methodological quality. The highest number of studies was found for quantitative ultrasound (QUS). The ability to indicate BMD or predict fractures was moderate to minor for all examined devices, using reported area under the curve (AUC) of Receiver Operating Characteristic curves values as standard.

CONCLUSIONS

Of the methods assessed, only QUS appears capable of perhaps replacing DXA as standalone examination in the future whilst radiographic absorptiometry could provide important information in areas with scarcity of DXA. QUS may be of added value even after DXA has been performed. Evaluation of proposed cutoff-values from population-based studies in separate population-based cohorts is still lacking for most examination devices.

Areal and volumetric bone mineral density and risk of multiple types of fracture in older men

Although many studies have examined the association between low bone mineral density (BMD) and fracture risk in older men, none have simultaneously studied the relationship between multiple BMD sites and risk of different types of fractures. Using data from the Osteoporotic Fractures in Men study, we evaluated the association between areal BMD (aBMD) by dual-energy X-ray absorptiometry (DXA) and volumetric BMD (vBMD) by quantitative computed tomography (QCT) measurements, and different types of fractures during an average of 9.7years of follow-up. Men answered questionnaires about fractures every 4months (>97% completions). Fractures were confirmed by centralized review of radiographic reports; pathological fractures were excluded. Risk of fractures was assessed at the hip, spine, wrist, shoulder, rib/chest/sternum, ankle/foot/toe, arm, hand/finger, leg, pelvis/coccyx, skull/face and any non-spine fracture. Age and race adjusted Cox proportional-hazards modeling was used to assess the risk of fracture in 3301 older men with both aBMD (at the femoral neck (FN) and lumbar spine) and vBMD (at the trabecular spine and FN, and cortical FN) measurements, with hazard ratios (HRs) expressed per standard deviation (SD) decrease. Lower FN and spine aBMD were associated with an increased risk of fracture at the hip, spine, wrist, shoulder, rib/chest/sternum, arm, and any non-spine fracture (statistically significant HRs per SD decrease ranged from 1.24-3.57). Lower trabecular spine and FN vBMD were associated with increased risk of most fractures with statistically significant HRs ranging between 1.27 and 3.69. There was a statistically significant association between FN cortical vBMD and fracture risk at the hip (HR=1.55) and spine sites (HR=1.26), but no association at other fracture sites. In summary, both lower aBMD and vBMD were associated with increased fracture risk. The stronger associations observed for trabecular vBMD than cortical vBMD may reflect the greater metabolic activity of the trabecular compartment.

BMP7 gene polymorphisms are not associated with bone mineral density or osteoporotic fractures in postmenopausal Chinese women

AIM

A previous study shows that bone morphogenetic protein 7 (BMP7) gene polymorphisms are associated with bone mineral density (BMD) in 920 European Americans. To determine the association of BMP7 polymorphisms and BMD and osteoporotic fracture susceptibility, we performed a case-control association study in postmenopausal Chinese women with or without osteoporotic fracture.

METHODS

A total of 3815 unrelated postmenopausal Chinese women (1238 with osteoporotic fracture and 2577 healthy controls) were recruited. BMDs of the lumbar spine 1-4 (L1-4) and proximal femur (including total hip and femoral neck) were measured using dual-energy X-ray absorptiometry. Eight tagging single nucleotide polymorphisms (SNPs) in BMP7 gene, including rs11086598, rs4811822, rs12481628, rs6025447, rs230205, rs17404303, rs162316 and rs6127980, were genotyped.

RESULTS

Among the 8 SNPs, rs6025447 and rs230205 were associated with total hip BMD (P=0.013 and 0.045, respectively). However, the associations became statistically insignificant after adjusting for age, height and weight. The TGTG haplotype of BMP7 gene was associated with total hip BMD (P=0.032), even after adjusting for age, height and weight (P=0.048); but the association was insignificant after performing the Bonferroni multiple-significance-test correction. Moreover, the 8 SNPs and 9 haplotypes of BMP7 gene were not associated with L1-4 or femoral neck BMD or osteoporotic fracture.

CONCLUSION

This large-sample case-control association study suggests that the common genetic polymorphisms of BMP7 gene are not major contributors to variations in BMD or osteoporotic fracture in postmenopausal Chinese women.

Association of 3D Geometric Measures Derived From Quantitative Computed Tomography With Hip Fracture Risk in Older Men

We investigated the associations of 3D geometric measures and volumetric bone mineral density (vBMD) of the proximal femur assessed by quantitative computed tomography (QCT) with hip fracture risk among elderly men. This study was a prospective case-cohort design nested within the Osteoporotic Fractures in Men Study (MrOS) cohort. QCT scans of 230 men (65 with confirmed hip fractures) were evaluated with Mindways' QCTPRO-BIT software. Measures that are indicative of bone strength for the femoral neck (FN) and for the trochanteric region (TR) were defined. Bending strength measures were estimated by minimum section modulus, buckling strength by buckling ratio, and a local thinning index (LTI). Integral and trabecular vBMD measures were also derived. Areal BMD (aBMD) of the total proximal femur from dual-energy X-ray absorptiometry (DXA) is presented for comparison. Associations of skeletal measures with incident hip fracture were estimated with hazard ratios (HR) per standard deviation and their 95% confidence intervals (CI) from Cox proportional hazard regression models with adjustment for age, body mass index (BMI), site, and aBMD. Men with hip fractures were older than men without fracture (77.1 ± 6.0 years versus 73.3 ± 5.7 years, p < 0.01). Age, BMI, and site-adjusted HRs were significant for all measures except TR_LTI. Total femural BMD by DXA (HR = 4.9, 95% CI 2.5-9.9) and QCT (HR = 5.5, 95% CI 2.5-11.7) showed the strongest association followed by QCT FN integral vBMD (HR = 3.6, 95% CI 1.8-6.9). In models that additionally included aBMD, FN buckling ratio (HR = 1.9, 95% CI 1.1-3.2) and trabecular vBMD of the TR (HR = 2.0, 95% CI 1.2-3.4) remained associated with hip fracture risk, independent of aBMD. QCT-derived 3D geometric indices of instability of the proximal femur were significantly associated with incident hip fractures, independent of DXA aBMD. Buckling of the FN is a relevant failure mode not entirely captured by DXA. Further research to study these relationships in women is warranted. © 2016 American Society for Bone and Mineral Research.

Assessment of osteoporosis using pelvic diagnostic computed tomography

The purpose of the present study is to determine if a correlation exists between bone mineral density (BMD) obtained from dual energy X-ray absorptiometry (DXA) and Hounsfield unit (HU) from pelvic diagnostic computed tomography (dCT), and to evaluate whether HU could be used to identify osteoporosis. Seventy-nine patients were included in this study. HU values were measured in three different sections: the head-neck junction of the femur, the middle portion of the femoral neck, and the intertrochanter of the femur (IT). In each sectional image, HU values were measured at two regions of interest: cortical and cancellous bone (HU_t) and cancellous bone. The correlation between BMD and HU_t of IT was significant (r = 0.839, p < 0.01). In IT, the area under the curve value of HU_t was 0.875 (0.796-0.955). We found that a HU_t of IT <170 can be regarded as indicating osteoporosis: its positive predictive value is 96.9 %. A HU_t of IT >210 can be regarded as indicating an absence of osteoporosis: its negative predictive value is 84.6 %. In conclusion, we found that a significant correlation between HU of pelvic dCT and BMD of DXA, and HU potentially provided an alternative method for determining regional BMD. Therefore, pelvic dCT could possibly be a supplementary method for initial diagnosis of osteoporosis and for initiation of treatment.

QCT of the proximal femur--which parameters should be measured to discriminate hip fracture?

SUMMARY

For quantitative computed tomography (QCT), most relevant variables to discriminate hip fractures were determined. A multivariate analysis showed that trabecular bone mineral density (BMD) of the trochanter with "cortical" thickness of the neck provided better fracture discrimination than total hip integral BMD. A slice-by-slice analysis of the neck or the inclusion of strength-based parameters did not improve fracture discrimination.

INTRODUCTION

For QCT of the proximal femur, a large variety of analysis parameters describing bone mineral density, geometry, or strength has been considered. However, in each given study, generally just a small subset was used. The aim of this study was to start with a comprehensive set and then select a best subset of QCT parameters for discrimination of subjects with and without acute osteoporotic hip fractures.

METHODS

The analysis was performed using the population of the European Femur Fracture (EFFECT) study (Bousson et al. J Bone Min Res: Off J Am Soc Bone Min Res 26:881-893, 2011). Fifty-six female control subjects (age 73.2 ± 9.3 years) were compared with 46 female patients (age 80.9 ± 11.1 years) with acute hip fractures. The QCT analysis software MIAF-Femur was used to virtually dissect the proximal femur and analyze more than 1000 parameters, predominantly in the femoral neck. A multivariate best-subset analysis was used to extract the parameters best discriminating hip fractures. All results were adjusted for age, height, and weight differences between the two groups.

RESULTS

For the discrimination of all proximal hip fractures as well as for cervical fractures alone, the measurement of neck parameters suffices (area under the curve (AUC) = 0.84). Parameters characterizing bone strength are discriminators of hip fractures; however, in multivariate models, only "cortical" cross-sectional area in the neck center remained as a significant contributor. The combination of one BMD parameter, trabecular BMD of the trochanter, and one geometry parameter, "cortical" thickness of the neck discriminated hip fracture with an AUC value of 0.83 which was significantly better than 0.77 for total femur BMD alone. A comprehensive slice-based analysis of the neck along its axis did not significantly improve hip fracture discrimination.

CONCLUSIONS

If QCT of the hip is performed, the analysis should include neck and trochanter. In particular, for fractures of any type, a comprehensive slice-based analysis of the neck along its axis did not significantly improve hip fracture discrimination nor did the inclusion of strength-related parameters other than "cortical" area or thickness. One BMD and one geometry parameter, in this study, the combination of trabecular BMD of the trochanter and of "cortical" thickness of the neck resulted in significant hip fracture discrimination.

Technologies for assessment of bone reflecting bone strength and bone mineral density in elderly women: an update

Reduced bone mineral density is a strong risk factor for fracture. The WHO's definition of osteoporosis is based on bone mineral density measurements assessed by dual x-ray absorptiometry. Several on other techniques than dual x-ray absorptiometry have been developed for quantitative assessment of bone, for example, quantitative ultrasound and digital x-ray radiogrammetry. Some of these techniques may also capture other bone properties than bone mass that contribute to bone strength, for example, bone porosity and microarchitecture. In this article we give an update on technologies which are available for evaluation primarily of bone mass and bone density, but also describe methods which currently are validated or are under development for quantitative assessment of other bone properties.

Osteoporosis in men: findings from the Osteoporotic Fractures in Men Study (MrOS)

The lifespan of men is increasing and this is associated with an increased prevalence of osteoporosis in men. Osteoporosis increases the risk of bone fracture. Fractures are associated with increased disability and mortality, and public health problems. We review here the study of osteoporosis in men as obtained from a longitudinal cohort of community-based older men, the Osteoporotic Fractures in Men Study (MrOS).

Predicting Hip Fracture Type With Cortical Bone Mapping (CBM) in the Osteoporotic Fractures in Men (MrOS) Study

Hip fracture risk is known to be related to material properties of the proximal femur, but fracture prediction studies adding richer quantitative computed tomography (QCT) measures to dual-energy X-ray (DXA)-based methods have shown limited improvement. Fracture types have distinct relationships to predictors, but few studies have subdivided fracture into types, because this necessitates regional measurements and more fracture cases. This work makes use of cortical bone mapping (CBM) to accurately assess, with no prior anatomical presumptions, the distribution of properties related to fracture type. CBM uses QCT data to measure the cortical and trabecular properties, accurate even for thin cortices below the imaging resolution. The Osteoporotic Fractures in Men (MrOS) study is a predictive case-cohort study of men over 65 years old: we analyze 99 fracture cases (44 trochanteric and 55 femoral neck) compared to a cohort of 308, randomly selected from 5994. To our knowledge, this is the largest QCT-based predictive hip fracture study to date, and the first to incorporate CBM analysis into fracture prediction. We show that both cortical mass surface density and endocortical trabecular BMD are significantly different in fracture cases versus cohort, in regions appropriate to fracture type. We incorporate these regions into predictive models using Cox proportional hazards regression to estimate hazard ratios, and logistic regression to estimate area under the receiver operating characteristic curve (AUC). Adding CBM to DXA-based BMD leads to a small but significant (p < 0.005) improvement in model prediction for any fracture, with AUC increasing from 0.78 to 0.79, assessed using leave-one-out cross-validation. For specific fracture types, the improvement is more significant (p < 0.0001), with AUC increasing from 0.71 to 0.77 for trochanteric fractures and 0.76 to 0.82 for femoral neck fractures. In contrast, adding DXA-based BMD to a CBM-based predictive model does not result in any significant improvement.

The Association Between BMI and QCT-Derived Proximal Hip Structure and Strength in Older Men: A Cross-Sectional Study

Although higher body mass index (BMI) is associated with higher bone mineral density, recent evidence indicates that increased BMI may not be consistently associated with reduced hip fracture risk. Moreover, substantial proportions of hip fractures occur among overweight and obese men and women. The role of increased BMI and obesity on bone density, structure, and strength at the hip is not well understood. We conducted cross-sectional analyses between BMI and various density and structure measures derived from quantitative computed tomography (QCT)-scans of the proximal femur, in 3067 men (mean age: 73 y) from the Osteoporotic Fractures in Men Study (MrOS). Finite element (FE) analysis of hip QCT scans was performed for a subcohort of 672 men to provide a measure of femoral strength for a simulated sideways fall. The impact force was estimated using patient-specific weight and height information. Multivariable general linear models were used to examine the associations between BMI and hip QCT measures. The relationship of BMI with hip QCT measures was significantly different between men categorized as non-obese and obese (P for interaction ≤ 0.014). For non-obese men (BMI < 30), increasing BMI was associated with higher integral, cortical and trabecular vBMD, integral volume, cross-sectional area, and percent cortical volume (all p < 0.001). For obese men (BMI ≥30), increasing BMI was not associated with any of those parameters. In addition, compared to non-obese men, obese men had a higher hip strength, but also a higher ratio of impact force to strength (P  < 0.0001), in theory increasing their risk of hip fracture despite their increased strength. These results provide a better understanding of hip fracture risk in obese men.

Clinical Use of Quantitative Computed Tomography (QCT) of the Hip in the Management of Osteoporosis in Adults: the 2015 ISCD Official Positions-Part I

The International Society for Clinical Densitometry (ISCD) has developed new official positions for the clinical use of quantitative computed tomography of the hip. The ISCD task force for quantitative computed tomography reviewed the evidence for clinical applications and presented a report with recommendations at the 2015 ISCD Position Development Conference. Here, we discuss the agreed on ISCD official positions with supporting medical evidence, rationale, controversy, and suggestions for further study. Parts II and III address the advanced techniques of finite element analysis applied to computed tomography scans and the clinical feasibility of existing techniques for opportunistic screening of osteoporosis using computed tomography scans obtained for other diagnosis such as colonography was addressed.

Type 1 diabetes patients have lower strength in femoral bone determined by quantitative computed tomography: A cross-sectional study

AIMS/INTRODUCTION

Previous studies have reported osteoporosis measured by dual-energy X-ray absorptiometry in younger patients with type 1 diabetes. Limitations of 2-D imaging, however, limit the precision of dual-energy X-ray absorptiometry for the measurement of bone mineral density and bone strength.

MATERIALS AND METHODS

Three-dimensional quantitative computed tomography was used to calculate volumetric-bone mineral density (vBMD) and strength in femoral bone subfractions. A total of 17 male type 1 diabetes patients and 18 sex-matched healthy controls aged from 18 to 49 years were investigated in the present cross-sectional study. Patients with overt nephropathy were excluded.

RESULTS

Type 1 diabetes patients had significantly lower cortical vBMD in the femoral neck, and significantly lower total vBMD, cortical thickness and cortical cross-sectional area (cortical CSA) in the intertrochanter. Bone strength estimated by the buckling ratio (an index of cortical instability) of the intertrochanter was significantly higher in type 1 diabetes patients. The following serum bone markers were comparable between the two groups: bone-specific alkaline phosphatase, N-terminal propeptide of type 1 procollagen, osteocalcin, pentosidine and homocysteine. Serum insulin-like growth factor-1 values were significantly lower in the type 1 diabetes patients than in controls. Serum insulin-like growth factor-1values were positively correlated with serum bone formation markers, and the total vBMD of the femoral neck and lumbar spine in type 1 diabetes patients.

CONCLUSIONS

The present study is the first investigation by quantitative computed tomography measurement to show cortical instability and lower vBMD in the intertrochanter of young and middle-aged type 1 diabetes patients. Low insulin-like growth factor-1 might be a causative factor for osteoporosis in type 1 diabetes.

Volumetric femoral BMD, bone geometry, and serum sclerostin levels differ between type 2 diabetic postmenopausal women with and without fragility fractures

While type 2 diabetes (T2D) is associated with higher skeletal fragility, specific risk stratification remains incompletely understood. We found volumetric bone mineral density, geometry, and serum sclerostin differences between low-fracture risk and high-fracture risk T2D women. These features might help identify T2D individuals at high fracture risk in the future.

INTRODUCTION

Diabetic bone disease, an increasingly recognized complication of type 2 diabetes mellitus (T2D), is associated with high skeletal fragility. Exactly which T2D individuals are at higher risk for fracture, however, remains incompletely understood. Here, we analyzed volumetric bone mineral density (vBMD), geometry, and serum sclerostin levels in two specific T2D subsets with different fracture risk profiles. We examined a T2D group with prior history of fragility fractures (DMFx, assigned high-risk group) and a fracture-free T2D group (DM, assigned low-risk group) and compared their results to nondiabetic controls with (Fx) and without fragility fractures (Co).

METHODS

Eighty postmenopausal women (n = 20 per group) underwent quantitative computed tomography (QCT) to compute vBMD and bone geometry of the proximal femur. Additionally, serum sclerostin, vitamin D, parathyroid hormone (PTH), HbA1c, and glomerular filtration rate (GFR) levels were measured. Statistical analyses employed linear regression models.

RESULTS

DMFx subjects exhibited up to 33 % lower femoral neck vBMD than DM subjects across all femoral sites (-19 % ≤ ΔvBMD ≤ -33 %, 0.008 ≤ p ≤0.021). Additionally, DMFx subjects showed significantly thinner cortices (-6 %, p = 0.046) and a trend toward larger bone volume (+10 %, p = 0.055) relative to DM women and higher serum sclerostin levels when compared to DM (+31.4 %, p = 0.013), Fx (+25.2 %, p = 0.033), and control (+22.4 %, p = 0.028) subjects.

CONCLUSION

Our data suggest that volumetric bone parameters by QCT and serum sclerostin levels can identify T2D individuals at high risk of fracture and might therefore show promise as clinical tools for fracture risk assessment in T2D. However, future research is needed to establish diabetes-specific QCT- and sclerostin-reference databases.

Femoral volumetric bone density, geometry, and strength in relation to 25-hydroxy vitamin D in older men

Low serum 25-hydroxy vitamin D (25(OH)D) concentrations are associated with increased hip fracture risk and decreased femoral areal bone mineral density (BMD) among elderly men. Structural dimensions of the proximal femur and volumetric BMD in cortical and trabecular compartments are also associated with hip fracture risk. However, associations of volumetric BMD or structural dimensions with serum 25(OH)D concentrations among older men remain unclear. In a random sample of 1608 men aged ≥65 years from the Osteoporotic Fractures in Men Study (MrOS), baseline serum 25(OH)D concentrations were measured by liquid chromatography/mass spectrometry assays. Femoral neck geometry and volumetric BMD derived from quantitative computed tomography included integral, cortical, and trabecular volumetric BMD; cross-sectional area; integral and cortical volume; and cortical volume as a percent of integral volume. We studied 888 men with vitamin D, parathyroid hormone (PTH), femoral neck geometry, and BMD measures. Whole-bone femoral strength and load-strength ratio from finite element (FE) analysis were also available for 356 men from this sample. Multivariable linear regression was used to estimate least square means of each femoral measure within quartiles of 25(OH)D adjusted for age, race, body mass index, height, latitude, and season of blood draw. Tests of linear trend in the means were performed across increasing quartile of serum 25(OH)D levels. Mean cortical volume (p trend = 0.006) and cortical volume as a percent of integral volume (p trend < 0.001) increased across increasing quartile of 25(OH)D level. However, overall femoral neck size (area and integral volume) did not vary by 25(OH)D level. Femoral neck volumetric BMD measures increased in a graded manner with higher 25(OH)D levels (p trend < 0.001). Femoral strength, but not load-strength ratio, increased with increasing 25(OH)D. Adjustment for PTH did not materially change these associations. We conclude that in older men, higher levels of endogenous 25(OH)D may increase whole-bone strength by increasing femoral volumetric BMD and cortical volume.

Building healthy bones throughout life: an evidence-informed strategy to prevent osteoporosis in Australia

Osteoporosis imposes a tremendous burden on Australia: 1.2 million Australians have osteoporosis and 6.3 million have osteopenia. In the 2007–08 financial year, 82 000 Australians suffered fragility fractures, of which > 17 000 were hip fractures. In the 2000–01 financial year, direct costs were estimated at $1.9 billion per year and an additional $5.6 billion on indirect costs. Osteoporosis was designated a National Health Priority Area in 2002; however, implementation of national plans has not yet matched the rhetoric in terms of urgency. Building healthy bones throughout life, the Osteoporosis Australia strategy to prevent osteoporosis throughout the life cycle, presents an evidence-informed set of recommendations for consumers, health care professionals and policymakers. The strategy was adopted by consensus at the Osteoporosis Australia Summit in Sydney, 20 October 2011. Primary objectives throughout the life cycle are: to maximise peak bone mass during childhood and adolescence to prevent premature bone loss and improve or maintain muscle mass, strength and functional capacity in healthy adults to prevent and treat osteoporosis in order to minimise the risk of suffering fragility fractures, and reduce falls risk, in older people. The recommendations focus on three affordable and important interventions — to ensure people have adequate calcium intake, vitamin D levels and appropriate physical activity throughout their lives. Recommendations relevant to all stages of life include: daily dietary calcium intakes should be consistent with Australian and New Zealand guidelines serum levels of vitamin D in the general population should be above 50nmol/L in winter or early spring for optimal bone health regular weight-bearing physical activity, muscle strengthening exercises and challenging balance/mobility activities should be conducted in a safe environment.

Intraoperative mechanical measurement of bone quality with the DensiProbe

Reduced bone stock can result in fractures that mostly occur in the spine, distal radius, and proximal femur. In case of operative treatment, osteoporosis is associated with an increased failure rate. To estimate implant anchorage, mechanical methods seem to be promising to measure bone strength intraoperatively. It has been shown that the mechanical peak torque correlates with the local bone mineral density and screw failure load in hip, hindfoot, humerus, and spine in vitro. One device to measure mechanical peak torque is the DensiProbe (AO Research Institute, Davos, Switzerland). The device has shown its effectiveness in mechanical peak torque measurement in mechanical testing setups for the use in hip, hindfoot, and spine. In all studies, the correlation of mechanical torque measurement and local bone mineral density and screw failure load could be shown. It allows the surgeon to judge local bone strength intraoperatively directly at the region of interest and gives valuable information if additional augmentation is needed. We summarize methods of this new technique, its advantages and limitations, and give an overview of actual and possible future applications.

Denosumab rapidly increases cortical bone in key locations of the femur: a 3D bone mapping study in women with osteoporosis

Women with osteoporosis treated for 36 months with twice-yearly injections of denosumab sustained fewer hip fractures compared with placebo. Treatment might improve femoral bone at locations where fractures typically occur. To test this hypothesis, we used 3D cortical bone mapping of postmenopausal women with osteoporosis to investigate the timing and precise location of denosumab versus placebo effects in the hips. We analyzed clinical computed tomography scans from 80 female participants in FREEDOM, a randomized trial, wherein half of the study participants received subcutaneous denosumab 60 mg twice yearly and the others received placebo. Cortical 3D bone thickness maps of both hips were created from scans at baseline, 12, 24, and 36 months. Cortical mass surface density maps were also created for each visit. After registration of each bone to an average femur shape model followed by statistical parametric mapping, we visualized and quantified statistically significant treatment effects. The technique allowed us to pinpoint systematic differences between denosumab and control and to display the results on a 3D average femur model. Denosumab treatment led to an increase in femoral cortical mass surface density and thickness, already evident by the third injection (12 months). Overall, treatment with denosumab increased femoral cortical mass surface density by 5.4% over 3 years. One-third of the increase came from increasing cortical density, and two-thirds from increasing cortical thickness, relative to placebo. After 36 months, cortical mass surface density and thickness had increased by up to 12% at key locations such as the lateral femoral trochanter versus placebo. Most of the femoral cortex displayed a statistically significant relative difference by 36 months. Osteoporotic cortical bone responds rapidly to denosumab therapy, particularly in the hip trochanteric region. This mechanism may be involved in the robust decrease in hip fractures observed in denosumab-treated women at increased risk of fracture.

Axial QCT: clinical applications and new developments

Quantitative computed tomography (QCT) is currently undergoing a renaissance, with an increasing number of studies being published and the definition of both QCT-specific osteoporosis thresholds and treatment criteria. Compared with dual-energy X-ray absorptiometry, the current standard bone mineral density technique, QCT has a number of pertinent advantages, including volumetric measurements, less susceptibility to degenerative spine changes, and higher sensitivity to changes in bone mass. Disadvantages include the higher radiation doses and less experience with fracture prediction and therapy monitoring. Over the last 10 yr, a number of novel applications have been described allowing assessment of bone mineral density and bone quality in larger patient populations, developments that may substantially improve patient care.

Efficacy of Dual Energy X-ray Absorptiometry for Evaluation of Biomechanical Properties: Bone Mineral Density and Actual Bone Strength

Introduction

Bone mineral density (BMD) is an important index in diagnosis of osteoporosis and other metabolic bone diseases, prediction of fractures, and monitoring treatment. This study was to find a more feasible technique for prediction of osteoporotic fracture between dual energy X-ray absorptiometry (DXA) and quantitative computed tomography (QCT) and to reveal the actual change of bone strength when BMD was changed.

Methods

Ten of these 20 specimens were used as the demineralized group and the other 10 as the control. Each specimen was immersed in HCl solution at for a period of at least 10 minutes, up to 100 minutes, at an interval of 10 minutes for different levels of demineralization. BMD was measured using DXA and QCT. Uniaxial compression tests were conducted to measure biomechanical parameters. Pearson correlation analysis was used respectively between BMD and biomechanical parameters and between DXA and QCT.

Results

Elastic modulus (r=0.87) and yield stress (r=0.84) showed a statistically significant correlation with DXA BMD. Through correlation analysis with QCT BMD and elastic modulus, correlation coefficient showed hemi-vertebra (r=0.80) and trabecular (r=0.68). In yield stress, there was a statistically significant correlation in hemi-vertebra (r=0.87) and trabecular bone (r=0.84).

Conclusion

DXA is a current standard technique not only for diagnosis of osteoporosis but also for prediction of fracture risk compared to QCT. Actual decrease of bone strength was much greater than that of BMD by both DXA and QCT.

Inter-scanner differences in in vivo QCT measurements of the density and strength of the proximal femur remain after correction with anthropomorphic standardization phantoms

In multicenter studies and longitudinal studies that use two or more different quantitative computed tomography (QCT) imaging systems, anthropomorphic standardization phantoms (ASPs) are used to correct inter-scanner differences and allow pooling of data. In this study, in vivo imaging of 20 women on two imaging systems was used to evaluate inter-scanner differences in hip integral BMD (iBMD), trabecular BMD (tBMD), cortical BMD (cBMD), femoral neck yield moment (My) and yield force (Fy), and finite-element derived strength of the femur under stance (FEstance) and fall (FEfall) loading. Six different ASPs were used to derive inter-scanner correction equations. Significant (p<0.05) inter-scanner differences were detected in all measurements except My and FEfall, and no ASP-based correction was able to reduce inter-scanner variability to corresponding levels of intra-scanner precision. Inter-scanner variability was considerably higher than intra-scanner precision, even in cases where the mean inter-scanner difference was statistically insignificant. A significant (p<0.01) effect of body size on inter-scanner differences in BMD was detected, demonstrating a need to address the effects of body size on QCT measurements. The results of this study show that significant inter-scanner differences in QCT-based measurements of BMD and bone strength can remain even when using an ASP.

High hip fracture risk in men with severe aortic calcification: MrOS study

A significant link between cardiovascular disease and osteoporosis is established in postmenopausal women, but data for men are scarce. We tested the hypothesis that greater severity of abdominal aortic calcification (AAC) was associated with an increased risk of nonspine fracture in 5994 men aged ≥ 65 years. AAC was assessed on 5400 baseline lateral thoracolumbar radiographs using a validated visual semiquantitative score. Total hip bone mineral density (BMD) was measured using dual-energy X-ray absorptiometry. Incident nonspine fractures were centrally adjudicated. After adjustment for age, body mass index (BMI), total hip BMD, fall history, prior fracture, smoking status, comorbidities, race, and clinical center, the risk of nonspine fracture (n=805) was increased among men with higher AAC (hazard ratio [HR] quartile 4 [Q4] [AAC score ≥ 9] versus quartile 1 [Q1] [0-1], 1.36; 96% confidence interval [CI], 1.10-1.68). This association was due to an increased risk of hip fracture (n=178) among men with higher AAC (HR Q4 versus Q1, 2.33; 95% CI, 1.41-3.87). By contrast, the association between AAC and the risk of nonspine, nonhip fracture was weaker and not significant (HR Q4 versus Q1, 1.22; 95% CI, 0.96-1.55). The findings regarding higher AAC and increased risk of fracture were not altered in additional analyses accounting for degree of trauma, estimated glomerular filtration rate, presence of lumbar vertebral fractures (which may bias AAC assessment), preexisting cardiovascular disease, ankle brachial index, or competing risk of death. Thus, in this large cohort of elderly men, greater AAC was independently associated with an increased risk of hip fracture, but not with other nonspine fractures. These findings suggest that AAC assessment may be a useful method for identification of older men at high risk of hip fracture.

Cortical bone assessed with clinical computed tomography at the proximal femur

Hip fractures are the most serious of all fragility fractures in older people of both sexes. Trips, stumbles, and falls result in fractures of the femoral neck or trochanter, and the incidence of these two common fractures is increasing worldwide as populations age. Although clinical risk factors and chance are important in causation, the ability of a femur to resist fracture also depends on the size and spatial distribution of the bone, its intrinsic material properties, and the loads applied. Over the past two decades, clinical quantitative computed tomography (QCT) studies of living volunteers have provided insight into how the femur changes with advancing age to leave older men and women at increased risk of hip fractures. In this review, we focus on patterns of cortical bone loss associated with hip fracture, age-related changes in cortical bone, and the effects of drugs used to treat osteoporosis. There are several methodologies available to measure cortical bone in vivo using QCT. Most techniques quantify bone density (g/cm(3)), mass (g), and thickness (mm) in selected, predefined or “traditional” regions of interest such as the “femoral neck” or “total hip” region. A recent alternative approach termed “computational anatomy,” uses parametric methods to identify systematic differences, before displaying statistically significant regions as color-scaled maps of density, mass, or thickness on or within a representative femur model. This review will highlight discoveries made using both traditional and computational anatomy methods, focusing on cortical bone of the proximal femur.

Hip fractures and bone mineral density in the elderly--importance of serum 25-hydroxyvitamin D

Background

The significance of serum 25-hydroxyvitamin D [25(OH)D] concentrations for hip fracture risk of the elderly is still uncertain. Difficulties reaching both frail and healthy elderly people in randomized controlled trials or large cohort studies may in part explain discordant findings. We determined hazard ratios for hip fractures of elderly men and women related to serum 25(OH)D, including both the frail and the healthy segment of the elderly population.

Methods

The AGES-Reykjavik Study is a prospective study of 5764 men and women, age 66–96 years, based on a representative sample of the population of Reykjavik, Iceland. Participation was 71.8%. Hazard ratios of incident hip fractures and baseline bone mineral density were determined according to serum concentrations of 25(OH)D at baseline.

Results

Mean follow-up was 5.4 years. Compared with referent values (50–75 nmol/L), hazard ratios for hip fractures were 2.24 (95% CI 1.63, 3.09) for serum 25(OH)D <30 nmol/L, adjusting for age, sex, body mass index, height, smoking, alcohol intake and season, and 2.08 (95% CI 1.51, 2.87), adjusting additionally for physical activity. No difference in risk was associated with 30–50 nmol/L or ≥75 nmol/L in either model compared with referent. Analyzing the sexes separately, hazard ratios were 2.61 (95% CI 1.47, 4.64) in men and 1.93 (95% CI 1.31, 2.84) in women. Values <30 nmol/L were associated with significantly lower bone mineral density of femoral neck compared with referent, z-scores -0.14 (95% CI −0.27, −0.00) in men and −0.11 (95% CI −0.22, −0.01) in women.

Conclusions

Our results lend support to the overarching importance of maintaining serum 25(OH)D above 30 nmol/L for bone health of elderly people while potential benefits of having much higher levels could not be detected.

Milk consumption throughout life and bone mineral content and density in elderly men and women

Association between bone mineral density and bone mineral content in old age and milk consumption in adolescence, midlife, and old age was assessed. The association was strongest for milk consumption in midlife: those drinking milk daily or more often had higher bone mineral density and content in old age than those drinking milk seldom or never.

INTRODUCTION

The role of lifelong milk consumption for bone mineral density (BMD) and bone mineral content (BMC) in old age is not clear. Here we assess the association between hip BMD and BMC in old age and milk consumption in adolescence, midlife, and current old age.

METHODS

Participants of the Age, Gene/Environment Susceptibility-Reykjavik Study, aged 66-96 years (N = 4,797), reported retrospective milk intake during adolescence and midlife as well as in current old age, using a validated food frequency questionnaire. BMC of femoral neck and trochanteric area was measured by volumetric quantitative computed tomography and BMD obtained. Association was assessed using linear regression models. Differences in BMC, bone volume, and BMD in relation to milk intake were portrayed as gender-specific Z-scores.

RESULTS

Men consuming milk ≥ once/day during midlife had 0.21 higher Z-scores for BMD and 0.18 for BMC in femoral neck (95 % confidence interval 0.05-0.39 and 0.01-0.35, respectively) compared with < once/week. Results were comparable for trochanter. For women the results were similar, with slightly lower differences according to midlife milk consumption. For current and adolescent milk consumption, differences in Z-scores were smaller and only reached statistical significance in the case of BMD for current consumption in men, while this association was less pronounced for BMC.

CONCLUSIONS

Our data suggest that regular milk consumption throughout life, from adolescence to old age, is associated with higher BMC and BMD in old age, with no differences seen in bone volume. The strongest associations are seen for midlife milk consumption in both genders.

Femoral and vertebral strength improvements in postmenopausal women with osteoporosis treated with denosumab

In the randomized, placebo-controlled FREEDOM study of women aged 60 to 90 years with postmenopausal osteoporosis, treatment with denosumab once every 6 months for 36 months significantly reduced hip and new vertebral fracture risk by 40% and 68%, respectively. To gain further insight into this efficacy, we performed a nonlinear finite element analysis (FEA) of hip and spine quantitative computed tomography (QCT) scans to estimate hip and spine strength in a subset of FREEDOM subjects (n = 48 placebo; n = 51 denosumab) at baseline, 12, 24, and 36 months. We found that, compared with baseline, the finite element estimates of hip strength increased from 12 months (5.3%; p < 0.0001) and through 36 months (8.6%; p < 0.0001) in the denosumab group. For the placebo group, hip strength did not change at 12 months and decreased at 36 months (-5.6%; p < 0.0001). Similar changes were observed at the spine: strength increased by 18.2% at 36 months for the denosumab group (p < 0.0001) and decreased by -4.2% for the placebo group (p = 0.002). At 36 months, hip and spine strength increased for the denosumab group compared with the placebo group by 14.3% (p < 0.0001) and 22.4% (p < 0.0001), respectively. Further analysis of the finite element models indicated that strength associated with the trabecular bone was lost at the hip and spine in the placebo group, whereas strength associated with both the trabecular and cortical bone improved in the denosumab group. In conclusion, treatment with denosumab increased hip and spine strength as estimated by FEA of QCT scans compared with both baseline and placebo owing to positive treatment effects in both the trabecular and cortical bone compartments. These findings provide insight into the mechanism by which denosumab reduces fracture risk for postmenopausal women with osteoporosis.

Fracture risk assessment in older adults using a combination of selected quantitative computed tomography bone measures: a subanalysis of the Age, Gene/Environment Susceptibility-Reykjavik Study

Bone mineral density (BMD) and geometric bone measures are individually associated with prevalent osteoporotic fractures. Whether an aggregate of these measures would better associate with fractures has not been examined. We examined relationships between self-reported fractures and selected bone measures acquired by quantitative computerized tomography (QCT), a composite bone score, and QCT-acquired dual-energy X-ray absorptiometry-like total femur BMD in 2110 men and 2682 women in the Age, Gene/Environment Susceptibility-Reykjavik Study. The combined bone score was generated by summing gender-specific Z-scores for 4 QCT measures: vertebral trabecular BMD, femur neck cortical thickness, femur neck trabecular BMD, and femur neck minimal cross-sectional area. Except for the latter measure, lower scores for QCT measures, singly and combined, showed positive (p < 0.05) associations with fractures. Results remained the same in stratified models for participants not taking bone-promoting medication. In women on bone-promoting medication, greater femur neck cortical thickness and trabecular BMD were significantly associated with fracture status. However, the association between fracture and combined bone score was not stronger than the associations between fracture and individual measures or total femur BMD. Thus, the selected measures did not all similarly associate with fracture status and did not appear to have an additive effect on fracture status.

Distribution of bone density and cortical thickness in the proximal femur and their association with hip fracture in postmenopausal women: a quantitative computed tomography study

The quantitative computed tomography (QCT) scans in an individually matched case-control study of women with hip fracture were analysed. There were widespread deficits in the femoral volumetric bone mineral density (vBMD) and cortical thickness of cases, and cortical vBMD and thickness discriminated hip fracture independently of BMD by dual-energy X-ray absorptiometry (DXA).

INTRODUCTION

Acknowledging the limitations of QCT associated with partial volume effects, we used QCT in an individually matched case-control study of women with hip fracture to better understand its structural basis.

METHODS

Fifty postmenopausal women (55-89 years) who had sustained hip fractures due to low-energy trauma underwent QCT scans of the contralateral hip within 3 months of the fracture. For each case, postmenopausal women, matched by age (±5 years), weight (±5 kg) and height (±5 cm), were recruited as controls. We quantified cortical, trabecular and integral vBMD and apparent cortical thickness (AppCtTh) in four quadrants of cross-sections along the length of the femoral head (FH), femoral neck (FN), intertrochanter and trochanter and examined their association with hip fracture.

RESULTS

Women with hip or intracapsular (IC) fracture had significantly (p < 0.05) lower vBMD and AppCtTh than the controls in the majority of cross-sections and quadrants of the proximal femur, and both cortical and trabecular compartments are involved. Cortical vBMD and AppCtTh in the FH and FN were associated with hip and IC fractures independent of hip areal BMD (aBMD). The combination of AppCtTh and trabecular or integral vBMD discriminated hip fracture, whereas the combination of FH and FN AppCtTh discriminated IC fracture significantly (p < 0.05) better than the hip aBMD.

CONCLUSION

Deficits in vBMD and AppCtTh in cases were widespread in the proximal femur, and cortical vBMD and AppCtTh discriminated hip fracture independently of aBMD by DXA.

Structural patterns of the proximal femur in relation to age and hip fracture risk in women

Fractures of the proximal femur are the most devastating outcome of osteoporosis. It is generally understood that age-related changes in hip structure confer increased risk, but there have been few explicit comparisons of such changes in healthy subjects to those with hip fracture. In this study, we used quantitative computed tomography and tensor-based morphometry (TBM) to identify three-dimensional internal structural patterns of the proximal femur associated with age and with incident hip fracture. A population-based cohort of 349 women representing a broad age range (21-97years) was included in this study, along with a cohort of 222 older women (mean age 79±7years) with (n=74) and without (n=148) incident hip fracture. Images were spatially normalized to a standardized space, and age- and fracture-specific morphometric features were identified based on statistical maps of shape features described as local changes of bone volume. Morphometric features were visualized as maps of local contractions and expansions, and significance was displayed as Student's t-test statistical maps. Significant age-related changes included local expansions of regions low in volumetric bone mineral density (vBMD) and local contractions of regions high in vBMD. Some significant fracture-related features resembled an accentuated aging process, including local expansion of the superior aspect of the trabecular bone compartment in the femoral neck, with contraction of the adjoining cortical bone. However, other features were observed only in the comparison of hip fracture subjects with age-matched controls including focal contractions of the cortical bone at the superior aspect of the femoral neck, the lateral cortical bone just inferior to the greater trochanter, and the anterior intertrochanteric region. Results of this study support the idea that the spatial distribution of morphometric features is relevant to age-related changes in bone and independent to fracture risk. In women, the identification by TBM of fracture-specific morphometric alterations of the proximal femur, in conjunction with vBMD and clinical risk factors, may improve hip fracture prediction.

Similarities and differences between sexes in regional loss of cortical and trabecular bone in the mid-femoral neck: the AGES-Reykjavik longitudinal study

The risk of hip fracture rises rapidly with age, and is notably higher in women. After falls and prior fragility fractures, the main clinically recognized risk factor for hip fracture is reduced bone density. To better understand the extent to which femoral neck density and structure change with age in each sex, we carried out a longitudinal study in subjects not treated with agents known to influence bone mineral density (BMD), to investigate changes in regional cortical thickness, as well as cortical and trabecular BMD at the mid-femoral neck. Segmental quantitative computed tomography (QCT) analysis was used to assess bone measurements in two anatomic subregions, the superolateral (superior) and inferomedial (inferior). A total of 400 older individuals (100 men and 300 women, aged 66-90 years) who were participants in the Age Gene/Environment Susceptibility-Reykjavik Study (AGES-Reykjavik), were studied. Participants had two QCT scans of the hip over a median follow-up of 5.1 years (mean baseline age 74 years). Changes in bone values during follow-up were estimated from mixed effects regression models. At baseline women had lower bone values in the superior region than men. At follow-up all bone values were lower in women, except cortical volumetric bone mineral density (vBMD) inferiorly. The relative losses in all bone values estimated in the superior region were substantially (about threefold) and significantly greater compared to those estimated in the inferior region in both sexes. Women lost cortical thickness and cortical vBMD more rapidly than men in both regions; and this was only weakly reflected in total femoral neck dual-energy X-ray absorptiometry (DXA)-like results. The higher rate of bone loss in women at critical locations may contribute materially to the greater femoral neck fracture incidence among women than men.

Previous exposure to simulated microgravity does not exacerbate bone loss during subsequent exposure in the proximal tibia of adult rats

Extended periods of inactivity cause severe bone loss and concomitant deterioration of the musculoskeletal system. Considerable research has been aimed at better understanding the mechanisms and consequences of bone loss due to unloading and the associated effects on strength and fracture risk. One factor that has not been studied extensively but is of great interest, particularly for human spaceflight, is how multiple or repeated exposures to unloading and reloading affect the skeleton. Space agencies worldwide anticipate increased usage of repeat-flier crewmembers, and major thrust of research has focused on better understanding of microgravity effects on loss of bone density at weightbearing skeletal sites; however there is limited data available on repeat microgravity exposure. The adult hindlimb unloaded (HU) rat model was used to determine how an initial unloading cycle will affect a subsequent exposure to disuse and recovery thereafter. Animals underwent 28 days of HU starting at 6 months of age followed by 56 days of recovery, and then another 28 days of HU with 56 days of recovery. In vivo longitudinal pQCT was used to quantify bone morphological changes, and ex vivo μCT was used to quantify trabecular microarchitecture and cortical shell geometry at the proximal tibia metaphysis (PTM). The mechanical properties of trabecular bone were examined by the reduced platen compression mechanical test. The hypothesis that the initial HU exposure will mitigate decrements in bone mass and density for the second HU exposure was supported as pre- to post-HU declines in total BMC, total vBMD, and cortical area by in vivo pQCT at the proximal tibia metaphysis were milder for the second HU (and not significant) compared to an age-matched single HU (3% vs. 6%, 2% vs. 6%, and 2% vs. 6%, respectively). In contrast, the hypothesis was not supported at the microarchitectural level as losses in BV/TV and Tb.Th. were similar during 2nd HU exposure and age-matched single HU. Recovery with respect to post-HU values and compared to aging controls for total BMC, vBMD and cortical area were slower in older animals exposed to single or double HU cycles compared to recovery of younger animals exposed to a single HU bout. Despite milder recovery at the older age, there was no difference between unloaded animals and controls at the end of second recovery period. Therefore, the data did not support the hypothesis that two cycles of HU exposure with recovery would have a net negative effect. Mechanical properties of trabecular bone were affected more severely than densitometric measures (35% loss in trabecular bone ultimate stress vs. 9% loss in trabecular vBMD), which can be attributed most prominently to reductions in trabecular bone density and tissue mineral density. Together, our data demonstrate that initial exposure to mechanical unloading does not exacerbate bone loss during a subsequent unloading period and two cycles of unloading followed by recovery do not have a cumulative net negative effect on total bone mineral content and density as measured by pQCT at the proximal tibia metaphysis.

Advanced CT based in vivo methods for the assessment of bone density, structure, and strength

Based on spiral 3D tomography a large variety of applications have been developed during the last decade to asses bone mineral density, bone macro and micro structure, and bone strength. Quantitative computed tomography (QCT) using clinical whole body scanners provides separate assessment of trabecular, cortical, and subcortical bone mineral density (BMD) and content (BMC) principally in the spine and hip, although the distal forearm can also be assessed. Further bone macrostructure, for example bone geometry or cortical thickness can be quantified. Special high resolution peripheral CT (hr-pQCT) devices have been introduced to measure bone microstructure for example the trabecular architecture or cortical porosity at the distal forearm or tibia. 3D CT is also the basis for finite element analysis (FEA) to determine bone strength. QCT, hr-pQCT, and FEM are increasingly used in research as well as in clinical trials to complement areal BMD measurements obtained by the standard densitometric technique of dual x-ray absorptiometry (DXA). This review explains technical developments and demonstrates how QCT based techniques advanced our understanding of bone biology.

Adaptations in tibial cortical thickness and total volumetric bone density in postmenopausal South Asian women with small bone size

There is some evidence that South Asian women may have an increased risk of osteoporosis compared with Caucasian women, although whether South Asians are at increased risk of fracture is not clear. It is unknown whether older South Asian women differ from Caucasian women in bone geometry. This is the first study, to the authors' knowledge, to use peripheral Quantitative Computed Tomography (pQCT) to measure radial and tibial bone geometry in postmenopausal South Asian women. In comparison to Caucasian women, Asian women had smaller bone size at the 4% (-18% p<0.001) and 66% radius (-15% p=0.04) as well as increased total density at the 4% (+13% p=0.01) radius. For the tibia, they had a smaller bone size at the 4% (-16% p=0.005) and 14% (-38% p=0.002) sites. Also, Asians had increased cortical thickness (-17% p=0.04) at the 38% tibia, (in proportion to bone size (-30% p=0.003)). Furthermore, at the 4% and 14% tibia there were increased total densities (+12% to +29% p<0.01) and at the 14% tibia there was increased cortical density (+5% p=0.005) in Asians. These differences at the 14% and 38% (but not 4%) remained statistically significant after adjustment for Body Mass Index (BMI). These adaptations are similar to those seen previously in Chinese women. Asian women had reduced strength at the radius and tibia, evidenced by the 20-40% reduction in both polar Strength Strain Index (SSIp) and fracture load (under bending). Overall, the smaller bone size in South Asians is likely to be detrimental to bone strength, despite some adaptations in tibial cortical thickness and tibial and radial density which may partially compensate for this.

Racial differences in cortical bone and their relationship to biochemical variables in Black and White children in the early stages of puberty

Osteoporotic fracture rates differ according to race with Blacks having up to half the rate of Whites. The current study demonstrates that racial divergence in cortical bone properties develops in early childhood despite lower serum 25-hydroxyvitamin D in Blacks.

INTRODUCTION

Racial differences in bone structure likely have roots in childhood as bone size develops predominantly during growth. This study aimed to compare cortical bone health within the tibial diaphysis of Black and White children in the early stages of puberty and explore the contributions of biochemical variables in explaining racial variation in cortical bone properties.

METHODS

A cross-sectional study was performed comparing peripheral quantitative computed tomography-derived cortical bone measures of the tibial diaphysis and biochemical variables in 314 participants (n = 155 males; n = 164 Blacks) in the early stages of puberty.

RESULTS

Blacks had greater cortical volumetric bone mineral density, mass, and size compared to Whites (all p < 0.01), contributing to Blacks having 17.0 % greater tibial strength (polar strength-strain index (SSIP)) (p < 0.001). Turnover markers indicated that Blacks had higher bone formation (osteocalcin (OC) and bone-specific alkaline phosphatase) and lower bone resorption (N-terminal telopeptide) than Whites (all p < 0.01). Blacks also had lower 25-hydroxyvitamin D (25(OH)D) and higher 1,25-dihydroxyvitamin D (1,25(OH)2D) and parathyroid hormone (PTH) (all p < 0.05). There were no correlations between tibial bone properties and 25(OH)D and PTH in Whites (all p ≥ 0.10); however, SSIP was negatively and positively correlated with 25(OH)D and PTH in Blacks, respectively (all p ≤ 0.02). Variation in bone cross-sectional area and SSIP attributable to race was partially explained by tibial length, 25(OH)D/PTH, and OC.

CONCLUSIONS

Divergence in tibial cortical bone properties between Blacks and Whites is established by the early stages of puberty with the enhanced cortical bone properties in Black children possibly being explained by higher PTH and OC.

Skeletal health in long-duration astronauts: nature, assessment, and management recommendations from the NASA Bone Summit

Concern about the risk of bone loss in astronauts as a result of prolonged exposure to microgravity prompted the National Aeronautics and Space Administration to convene a Bone Summit with a panel of experts at the Johnson Space Center to review the medical data and research evidence from astronauts who have had prolonged exposure to spaceflight. Data were reviewed from 35 astronauts who had served on spaceflight missions lasting between 120 and 180 days with attention focused on astronauts who (1) were repeat fliers on long-duration missions, (2) were users of an advanced resistive exercise device (ARED), (3) were scanned by quantitative computed tomography (QCT) at the hip, (4) had hip bone strength estimated by finite element modeling, or (5) had lost >10% of areal bone mineral density (aBMD) at the hip or lumbar spine as measured by dual-energy X-ray absorptiometry (DXA). Because of the limitations of DXA in describing the effects of spaceflight on bone strength, the panel recommended that the U.S. space program use QCT and finite element modeling to further study the unique effects of spaceflight (and recovery) on bone health in order to better inform clinical decisions.

Spaceflight-induced bone loss: is there an osteoporosis risk?

Currently, the measurement of areal bone mineral density (aBMD) is used at NASA to evaluate the effects of spaceflight on the skeletal health of astronauts. Notably, there are precipitous declines in aBMD with losses >10 % detected in the hip and spine in some astronauts following a typical 6-month mission in space. How those percentage changes in aBMD relate to fracture risk in the younger-aged astronaut is unknown. Given the unique set of risk factors that could be contributing to this bone loss (eg, adaptation to weightlessness, suboptimal diet, reduced physical activity, perturbed mineral metabolism), one might not expect skeletal changes due to spaceflight to be similar to skeletal changes due to aging. Consequently, dual-energy X-ray absorptiometry (DXA) measurement of aBMD may be too limiting to understand fracture probability in the astronaut during a long-duration mission and the risk for premature osteoporosis after return to Earth. Following a brief review of the current knowledge-base, this paper will discuss some innovative research projects being pursued at NASA to help understand skeletal health in astronauts.

Denosumab densitometric changes assessed by quantitative computed tomography at the spine and hip in postmenopausal women with osteoporosis

FREEDOM was a phase 3 trial in 7808 women aged 60-90yr with postmenopausal osteoporosis. Subjects received placebo or 60 mg denosumab subcutaneously every 6mo for 3yr in addition to daily calcium and vitamin D. Denosumab significantly decreased bone turnover; increased dual-energy X-ray absorptiometry (DXA) areal bone mineral density (aBMD); and significantly reduced new vertebral, nonvertebral, and hip fractures. In a subset of women (N=209), lumbar spine, total hip, and femoral neck volumetric BMD (vBMD) were assessed by quantitative computed tomography at baseline and months 12, 24, and 36. Significant improvement from placebo and baseline was observed in aBMD and vBMD in the denosumab-treated subjects at all sites and time points measured. The vBMD difference from placebo reached 21.8%, 7.8%, and 5.9%, respectively, for the lumbar spine, total hip, and femoral neck at 36mo (all p≤0.0001). Compared with placebo and baseline, significant increases were also observed in bone mineral content (BMC) at the total hip (p<0.0001) largely related to significant BMC improvement in the cortical compartment (p<0.0001). These results supplement the data from DXA on the positive effect of denosumab on BMD in both the cortical and trabecular compartments.

Lower fracture risk in older men with higher sclerostin concentration: a prospective analysis from the MINOS study

Sclerostin is synthesized by osteocytes and inhibits bone formation. We measured serum sclerostin levels in 710 men aged 50 years and older. Bone mineral density (BMD) was measured at the lumbar spine, hip, and distal forearm. Serum sclerostin increased with age (unadjusted r = 0.30, p < 0.001). After adjustment for age, weight, and bioavailable 17β-estradiol, serum sclerostin correlated positively with BMD (r = 0.24 to 0.35, p < 0.001) and negatively with the levels of bone turnover markers (r = - 0.09 to - 0.23, p < 0.05 to 0.001). During a 10-year follow-up, 75 men sustained fragility fractures. Fracture risk was lower in the two upper quintiles of sclerostin combined versus three lower quintiles combined (6.1 versus 13.5%, p < 0.01). We compared fracture risk in the two highest quintiles combined versus three lower quintiles combined using the Cox model adjusted for age, weight, leisure physical activity, BMD, bone width (tubular bones), prevalent fracture, prevalent falls, ischemic heart disease, and severe abdominal aortic calcification. Men with higher sclerostin concentration had lower fracture risk (adjusted for hip BMD, hazard ratio [HR] = 0.55, 95% confidence interval [CI] 0.31 to 0.96, p < 0.05). The results were similar in 47 men with major fragility fractures (adjusted for lumbar spine BMD: HR = 0.39, 95% CI 0.17 to 0.90, p < 0.05). Men who had higher sclerostin and higher BMD (two highest quintiles) had lower risk of fracture compared with men who had lower BMD and lower sclerostin levels (three lower quintiles) (HR = 0.24, 95% CI 0.10 to 0.62, p < 0.005). Circulating sclerostin was not associated with mortality rate or the incidence of major cardiovascular events. Thus, in older men, higher serum sclerostin levels are associated with lower risk of fracture, higher BMD, and lower bone turnover rate.

Impaired bone mineralization accompanied by low vitamin D and secondary hyperparathyroidism in patients with femoral neck fracture

SUMMARY

Although it is well established that a decrease in bone mass increases the risk of osteoporotic fractures, the proportion of fractures attributable to areal bone mineral density (BMD) is rather low. Here, we have identified bone mineralization defects together with low serum 25-hydroxyvitamin D (25-(OH) D) levels as additional factors associated with femoral neck fractures.

INTRODUCTION

Osteoporotic fractures of the femoral neck are associated with increased morbidity and mortality. Although it is well established that a decrease in bone mass increases the risk of osteoporotic fractures, the proportion of fractures attributable to areal BMD is rather low. To identify possible additional factors influencing femur neck fragility, we analyzed patients with femoral neck fracture.

METHODS

We performed a detailed clinical and histomorphometrical evaluation on 103 patients with femoral neck fracture including dual-energy X-ray absorptiometry, laboratory parameters, and histomorphometric and bone mineral density distribution (BMDD) analyses of undecalcified processed biopsies of the femoral head and set them in direct comparison to skeletal healthy control individuals.

RESULTS

Patients with femoral neck fracture displayed significantly lower serum 25-(OH) D levels and increased serum parathyroid hormone (PTH) compared to controls. Histomorphometric analysis revealed not only a decreased bone volume and trabecular thickness in the biopsies of the patients, but also a significant increase of osteoid indices. BMDD analysis showed increased heterogeneity of mineralization in patients with femoral neck fracture. Moreover, patients with femoral neck fracture and serum 25-(OH) D levels below 12 μg/l displayed significantly thinner trabecular bone.

CONCLUSION

Taken together, our data suggest that impaired bone mineralization accompanied by low serum 25-(OH) D levels is of major importance in the etiology of femoral neck fractures. Therefore, balancing serum 25-(OH) D levels and thereby normalizing PTH serum levels may counteract pronounced mineralization defects and might decrease the incidence of femoral neck fractures.

Bone density, turnover, and estimated strength in postmenopausal women treated with odanacatib: a randomized trial

CONTEXT

Odanacatib, a cathepsin K inhibitor, increases spine and hip areal bone mineral density (BMD) in postmenopausal women with low BMD and cortical thickness in ovariectomized monkeys.

OBJECTIVE

The objective of the study was to examine the impact of odanacatib on the trabecular and cortical bone compartments and estimated strength at the hip and spine.

DESIGN

This was a randomized, double-blind, 2-year trial.

SETTING

The study was conducted at a private or institutional practice.

PARTICIPANTS

PARTICIPANTS included 214 postmenopausal women with low areal BMD.

INTERVENTION

The intervention included odanacatib 50 mg or placebo weekly.

MAIN OUTCOME MEASURES

Changes in areal BMD by dual-energy x-ray absorptiometry (primary end point, 1 year areal BMD change at lumbar spine), bone turnover markers, volumetric BMD by quantitative computed tomography (QCT), and bone strength estimated by finite element analysis were measured.

RESULTS

Year 1 lumbar spine areal BMD percent change from baseline was 3.5% greater with odanacatib than placebo (P < .001). Bone-resorption marker C-telopeptide of type 1 collagen was significantly lower with odanacatib vs placebo at 6 months and 2 years (P < .001). Bone-formation marker procollagen I N-terminal peptide initially decreased with odanacatib but by 2 years did not differ from placebo. After 6 months, odanacatib-treated women had greater increases in trabecular volumetric BMD and estimated compressive strength at the spine and integral and trabecular volumetric BMD and estimated strength at the hip (P < .001). At the cortical envelope of the femoral neck, bone mineral content, thickness, volume, and cross-sectional area also increased from baseline with odanacatib vs placebo (P < .001 at 24 months). Adverse experiences were similar between groups.

CONCLUSIONS

Over 2 years, odanacatib decreased bone resorption, maintained bone formation, increased areal and volumetric BMD, and increased estimated bone strength at both the hip and spine.

Quantitative ultrasound of cortical bone in the femoral neck predicts femur strength: results of a pilot study

A significant risk of femoral neck (FN) fracture exists for men and women with an areal bone mineral density (aBMD) higher than the osteoporotic range, as measured with dual-energy X-ray absorptiometry (DXA). Separately measuring the cortical and trabecular FN compartments and combining the results would likely be a critical aspect of enhancing the diagnostic capabilities of a new technique. Because the cortical shell determines a large part of FN strength a novel quantitative ultrasound (QUS) technique that probes the FN cortical compartment was implemented. The sensitivity of the method to variations of FN cortical properties and FN strength was tested. Nine femurs (women, mean age 83 years) were subjected to QUS to measure the through transmission time-of-flight (TOF) at the FN and mechanical tests to assess strength. Quantitative computed tomography (QCT) scans were performed to enable analysis of the dependence of TOF on bone parameters. DXA was also performed for reference. An ultrasound wave propagating circumferentially in the cortical shell was measured in all specimens. Its TOF was not influenced by the properties of the trabecular compartment. Averaged TOF for nine FN measurement positions/orientations was significantly correlated to strength (R2  = 0.79) and FN cortical QCT variables: total BMD (R(2)  = 0.54); regional BMD in the inferoanterior (R2  = 0.90) and superoanterior (R2  = 0.57) quadrants; and moment of inertia (R2  = 0.71). The results of this study demonstrate that QUS can perform a targeted measurement of the FN cortical compartment. Because the method involves mechanical guided waves, the QUS variable is related to the geometric and material properties of the cortical shell (cortical thickness, tissue elasticity, and porosity). This work opens the way to a multimodal QUS assessment of the proximal femur, combining our approach targeting the cortical shell with the existing modality sensitive to the trabecular compartment. In vivo feasibility of our approach has to be confirmed with experimental data in patients.

A nonlinear QCT-based finite element model validation study for the human femur tested in two configurations in vitro

PURPOSE

Femoral fracture is a common medical problem in osteoporotic individuals. Bone mineral density (BMD) is the gold standard measure to evaluate fracture risk in vivo. Quantitative computed tomography (QCT)-based homogenized voxel finite element (hvFE) models have been proved to be more accurate predictors of femoral strength than BMD by adding geometrical and material properties. The aim of this study was to evaluate the ability of hvFE models in predicting femoral stiffness, strength and failure location for a large number of pairs of human femora tested in two different loading scenarios.

METHODS

Thirty-six pairs of femora were scanned with QCT and total proximal BMD and BMC were evaluated. For each pair, one femur was positioned in one-legged stance configuration (STANCE) and the other in a sideways configuration (SIDE). Nonlinear hvFE models were generated from QCT images by reproducing the same loading configurations imposed in the experiments. For experiments and models, the structural properties (stiffness and ultimate load), the failure location and the motion of the femoral head were computed and compared.

RESULTS

In both configurations, hvFE models predicted both stiffness (R(2)=0.82 for STANCE and R(2)=0.74 for SIDE) and femoral ultimate load (R(2)=0.80 for STANCE and R(2)=0.85 for SIDE) better than BMD and BMC. Moreover, the models predicted qualitatively well the failure location (66% of cases) and the motion of the femoral head.

CONCLUSIONS

The subject specific QCT-based nonlinear hvFE model cannot only predict femoral apparent mechanical properties better than densitometric measures, but can additionally provide useful qualitative information about failure location.

Fourier transform infrared imaging of femoral neck bone: reduced heterogeneity of mineral-to-matrix and carbonate-to-phosphate and more variable crystallinity in treatment-naive fracture cases compared with fracture-free controls

After the age of 60 years, hip fracture risk strongly increases, but only a fifth of this increase is attributable to reduced bone mineral density (BMD, measured clinically). Changes in bone quality, specifically bone composition as measured by Fourier transform infrared spectroscopic imaging (FTIRI), also contribute to fracture risk. Here, FTIRI was applied to study the femoral neck and provide spatially derived information on its mineral and matrix properties in age-matched fractured and nonfractured bones. Whole femoral neck cross sections, divided into quadrants along the neck's axis, from 10 women with hip fracture and 10 cadaveric controls were studied using FTIRI and micro-computed tomography. Although 3-dimensional micro-CT bone mineral densities were similar, the mineral-to-matrix ratio was reduced in the cases of hip fracture, confirming previous reports. New findings were that the FTIRI microscopic variation (heterogeneity) of the mineral-to-matrix ratio was substantially reduced in the fracture group as was the heterogeneity of the carbonate-to-phosphate ratio. Conversely, the heterogeneity of crystallinity was increased. Increased variation of crystallinity was statistically associated with reduced variation of the carbonate-to-phosphate ratio. Anatomical variation in these properties between the different femoral neck quadrants was reduced in the fracture group compared with controls. Although our treatment-naive patients had reduced rather than increased bending resistance, these changes in heterogeneity associated with hip fracture are in another way comparable to the effects of experimental bisphosphonate therapy, which decreases heterogeneity and other indicators of bone's toughness as a material.

Predictors of femoral neck fracture following hip resurfacing: a cadaveric study

We aimed to establish if radiological parameters, dual energy x-ray absorptiometry (DEXA) and quantitative CT (qCT) could predict the risk of sustaining a femoral neck fracture following hip resurfacing. Twenty-one unilateral fresh frozen femurs were used. Each femur had a plain digital anteroposterior radiograph, DEXA scan and qCT scan. Femurs were then prepared for a Birmingham Hip Resurfacing femoral component and loaded to failure. Results demonstrated that gender and qCT measurements showed strong correlation with failure load. QCT could be used as an individual measure to predict risk of post-operative femoral neck fracture. However, when qCT is unavailable; gender, pre-operative DEXA scan and Neck Width measurements can be used together to assess risk of post-operative femoral neck fracture in patients due to undergo hip resurfacing.

Bivariate genome-wide association study suggests fatty acid desaturase genes and cadherin DCHS2 for variation of both compressive strength index and appendicular lean mass in males

Compressive strength index (CSI) is a newly established index for predicting hip fracture, the most serious consequence of osteoporosis. Appendicular lean mass (ALM), which influences skeletal strength of the lower limbs, is another trait associated with the risk of hip fracture. In this study, we performed a bivariate genome-wide association study (GWAS) to identify new candidate genes responsible for both CSI and ALM. In our discovery sample of 1627 unrelated Chinese subjects (802 males and 825 females), we scanned 909,509 SNPs using the Affymetrix Human Genome SNP 6.0 genotyping array. We successfully replicated our results in a sample of 2286 Caucasian subjects (558 males and 1728 females). The results indicated that five SNPs (rs174583, rs174577, rs174549, rs174548, rs7672337) in the FADS1, FADS2, and DCHS2 genes had significant bivariate associations with CSI and ALM in male subjects for both the GWAS discovery (with P<8.42×10(-6)) and the Caucasian sample (with P<0.07). We performed further replication analysis in a 2nd Caucasian sample with 501 Caucasian male subjects, using Affymetrix 500k arrays, and found that two of the above SNPs (rs174548 and rs174549, P=0.07) had bivariate associations with both CSI and ALM in males; the other 3 SNPs were not typed with the 500k array. The above findings suggest that the 3 genes, FADS1, FADS2, and DCHS2, containing these SNPs might play dual roles influencing both CSI and ALM in males. Our findings provide new insights into our understanding of the genetic basis of bone metabolism and the pathogenesis of osteoporosis.

Central QCT reveals lower volumetric BMD and stiffness in premenopausal women with idiopathic osteoporosis, regardless of fracture history

CONTEXT

Idiopathic osteoporosis (IOP) affects otherwise healthy young individuals with intact gonadal function and no secondary cause of bone fragility. In premenopausal women with IOP, a low trauma fracture is evidence of impaired bone quality and strength. The extent to which low bone mineral density (BMD) by dual-energy x-ray absorptiometry (DXA) reflects low volumetric BMD, bone microstructure, and strength is uncertain in the absence of low trauma fracture.

OBJECTIVE

The objective of the study was to compare three-dimensional volumetric BMD and bone stiffness in premenopausal women with IOP based on fracture history, those with idiopathic low BMD (Z score ≤ -2.0) and no low trauma fracture, and normal age-matched controls.

DESIGN

We measured volumetric BMD and bone geometry by central quantitative computed tomography (cQCT) scans of the spine and hip and estimated bone stiffness by finite element analysis of cQCT data sets in 32 premenopausal women with IOP, 12 with idiopathic low BMD, and 34 controls.

RESULTS

Subjects had comparable decreases in total and trabecular volumetric BMD, cortical thickness, and whole-bone stiffness compared with controls, regardless of fracture history. These differences remained significant after controlling for age, body mass index, and bone size. The positive predictive values of a DXA Z score of -2.0 or less for a cQCT volumetric BMD Z score of -2.0 or less were 95% at the lumbar spine, 90% at the total hip, and 86% at the femoral neck.

CONCLUSION

Women with idiopathic low BMD alone and those with low trauma fractures had comparable deficits in bone mass, structure, and stiffness. Low areal BMD by DXA is fairly accurate for predicting low volumetric BMD by cQCT. These results are consistent with three-dimensional bone imaging at the iliac crest, radius, and tibia in premenopausal IOP and suggest that the term osteoporosis may be appropriate in women with Z scores below -2.0, whether or not there is a history of fracture.