Tooth-borne vs bone-borne rapid maxillary expanders in late adolescence

Effect and stability of miniscrew-assisted rapid palatal expansion: A systematic review and meta-analysis

Objective

This study aimed to systematically analyze the effect and stability of miniscrew-assisted rapid palatal expansion (MARPE) to provide a reference for the clinical treatment of patients with maxillary transverse deficiency (MTD).

Methods

We searched PubMed, Science Direct, Web of Science, Embase, Cochrane Library, CNKI, and Wanfang Database for relevant studies published before February 18, 2021 and selected them according to the eligibility criteria. The Cochrane Handbook for Systematic Reviews (version 5.1.0) criteria were used for the quality assessment of randomized controlled trials, while the scoring protocol of the methodological index for non-randomized studies was used for non-randomized controlled trials. Statistical analysis was performed using the RevMan5.3 software.

Results

All the included studies showed a relatively high success rate of expansion. The changes in both the intermolar and alveolar widths after MARPE were statistically significant. MARPE exhibited greater skeletal expansion effects than did conventional RPE. The midpalatal suture was opened in parallel after MARPE. A small amount of relapse was observed 1 year after expansion. MARPE caused tooth inclination and a decrease in alveolar height, but it was less significant than in conventional RPE.

Conclusions

MARPE may be an effective treatment modality for patients with MTD. It causes great transverse skeletal expansion in late adolescence. In comparison to conventional RPE, MARPE has lower detrimental periodontal effects and has certain clinical advantages.

Skeletal expansion using a miniscrew-assisted rapid palatal expansion in a 50-year-old patient

This case report illustrates a nonsurgical treatment plan using a miniscrew-assisted rapid palatal expander (MARPE) in a 50-year-old patient with maxillary transverse deficiency. The MARPE appliance consisted of a conventional Hyrax expander anchored to 4 orthodontic miniscrews. The exact locations of the miniscrews were determined with virtual planning software. Cone-beam computed tomography (CBCT) scans were superimposed on the maxillary digital model, and 3-dimensional-printed surgical guides were used to accurately position the mini-implants. A slow expansion protocol was used, and the appliance was held in place during the entire treatment (almost 20 months). Pretreatment, postexpansion, and posttreatment CBCT scans show the parallel expansion obtained without dental torque compensation or bite opening. The posttreatment scan showed that a long period is required to complete the midpalatal suture mineralization. MARPE has proven effective in correcting transverse discrepancies, even in adults. However, posttreatment CBCT imaging showed incomplete ossification of the midpalatal suture, demonstrating that the retention period should be extended in some adult patients.

Dehiscence and buccal bone thickness after rapid maxillary expansion in young patients with unilateral cleft lip and palate

INTRODUCTION

The present study aimed to evaluate the consequences of rapid maxillary expansion in the buccal bone thickness and dehiscence of subjects with unilateral cleft lip and palate.

METHODS

This prospective cohort study consisted of 30 participants, 20 males and 10 females, between 8 and 15 years old. Participants were allocated into 3 groups, according to the type of maxillary constriction, and were treated with different types of expanders: G1, hyrax; G2, fan-type; G3, inverted mini-hyrax. Cone-beam computed tomography scans were performed immediately before treatment and after 90 days of retention. Linear measurements were obtained by the same calibrated and blinded examiner.

RESULTS

An average of 0.8 mm decrease in buccal bone thickness (P <0.001) and a 0.5 mm increase in dehiscence (P <0.001) were observed. There was no significant difference between the cleft and noncleft side for all variables (P >0.05), as there was no significant difference between groups (P >0.05).

CONCLUSION

The findings in this study allow the conclusion that the orthopedic forces of rapid maxillary expansion lead to a decrease in the posterior buccal bone volume in unilateral cleft lip and palate patients.

Skeletal and dentoalveolar effects of slow vs rapid activation protocols of miniscrew-supported maxillary expanders in adolescents: A randomized clinical trial

OBJECTIVES

To compare between skeletal and dentoalveolar effects of slow and rapid activation of miniscrew-supported expanders.

MATERIALS AND METHODS

A total of 30 patients were randomly allocated to two groups using block randomization and the allocation ratio 1:1. Both groups received maxillary expanders anchored using four miniscrews. Activation protocol was once every other day in the slow expansion (SME) group and twice daily in the rapid expansion (RME) group. Cone-beam computed tomography (CBCT) scans were obtained before expansion and after removal of the expanders. Transverse skeletal and dentoalveolar changes were measured using CBCT.

RESULTS

A total of 12 patients in the SME group (mean age, 14.30 ± 1.37 years) and 12 patients in the RME group (mean age, 15.07 ± 1.59 years) were analyzed. RME showed significantly greater widening of the mid-palatal suture at the level of first molars (mean difference [SME - RME] = -0.61 mm), and a greater increase in right and left molar buccal inclination (mean difference= -3.83° and -2.03°, respectively). Percentage of skeletal expansion relative to the jackscrew opening was not significantly different between the groups. Palatal inflammation was evident following appliance removal. Miniscrew mobility and bending were observed with RME.

CONCLUSIONS

Both SME and RME were effective in correcting skeletal transverse maxillary deficiency. However, RME resulted in more buccal tipping of maxillary molars and in miniscrew failures and bending.

Evaluation of bone depth, cortical bone, and mucosa thickness of palatal posterior supra-alveolar insertion site for miniscrew placement

BACKGROUND

The use of palatal miniscrew offers the possibility to improve the effectiveness of orthodontic expansion devices. Palatal expanders supported by miniscrew can be applied with different clinical protocols. Some authors proposed the use of four palatal miniscrews during miniscrew-supported palatal expansion to maximize skeletal effects in young adults' treatment. However, bone availability decreases in the posterior paramedian palatal regions, making the positioning of the two-posterior paramedian palatal miniscrews challenging, when it is performed avoiding nasal cavities invasion. Some authors proposed miniscrews insertion in a specific region located laterally to the palatal process of the maxillary bone, and apically relatively to the dento-alveolar process. The aim of this study was to evaluate the bone thickness, cortical bone thickness, and mucosae depth of this anatomical site that, in this study, was defined as palatal posterior supra-alveolar insertion site.

RESULTS

The evaluation of bone availability of palatal posterior supra-alveolar insertion site at different antero-posterior levels showed that the maximum amount of total bone thickness was found between the second premolar and the first molar. At this level total bone, thickness is significantly (p < .05) greater compared to the other sagittal sites and it offers on average around 2 mm of extra bone depth for miniscrew placement. Cortical bone thickness is adequate for primary miniscrew stability. Overall, cortical bone thickness considered at different insertion sites showed significant statistically (p < .05) differences. The findings of this study showed that palatal mucosa is particularly thick with average values ranging from 4 to 7 mm, and its extension ultimately affects miniscrew length selection. Palatal mucosa thickness showed no clinically significant differences comparing different sagittal and vertical insertion sites. Data also showed that palatal mucosal thickness slightly significantly increases (p < .05) with the inclination of the insertion axis relative to the occlusal plane. Finally, study findings showed that vertical growth pattern can significantly affect considered outcomes (p < .05).

CONCLUSIONS

Palatal posterior supra-alveolar insertion site is an appropriate site for posterior insertion of palatal miniscrews. Considering high anatomical variation preliminary CBCT evaluation is important to achieve optimal miniscrew placement.

Skeletal and alveolar changes in conventional rapid palatal expansion (RPE) and miniscrew-assisted RPE (MARPE): a prospective randomized clinical trial using low-dose CBCT

Background

This prospective randomized clinical trial aimed to evaluate the immediate and short-term skeletal, dentoalveolar, and periodontal effects of rapid palatal expansion (RPE) and miniscrew-assisted RPE (MARPE) in adolescent and young adult patients.

Methods

This study followed a two-arm, parallel, randomized clinical trial design that recruited patients with transverse maxillary deficiency in a 1:1 allocation ratio. Forty patients (14 men and 26 women) requiring maxillary expansion were randomly allocated to the RPE (n = 20, age = 14.0 ± 4.5) or MARPE (n = 20, age = 14.1 ± 4.2) groups. The assignment was performed via computer-generated block randomization, with a block size of four. Upon identical (35 turns) amount of expansion, low-dose cone-beam computed tomography images were taken before treatment (T0), immediately after expansion (T1), and after a 3-month consolidation period (T2). The primary outcome of this study comprised the assessment of midpalatal suture separation. Secondary outcomes included, skeletal, dentoalveolar, and periodontal measurements, which were performed at each time point.

Results

The frequency of midpalatal suture separation was 90% (18/20) and 95% (19/20) for the RPE and MARPE groups, respectively. A greater increase in nasal width in the molar region (M-NW) and greater palatine foramen (GPF) was observed immediately after the expansion (T1-T0) and consolidation periods (T2-T0) in the MARPE group compared to the RPE group (P < 0.05). The MARPE and RPE groups showed similar dentoalveolar changes except for the maxillary width (PM-MW, M-MW). The MARPE group presented greater bilateral first premolar (PM-MW) and molar (M-MW) maxillary width in relation to the RPE group (P < 0.05). Through the expansion and consolidation periods (T2-T0), lesser buccal displacement of the anchor teeth was observed in the MARPE group (PM-BBPT, PM-PBPT, M-BBPT [mesial and distal roots], and M-PBPT)( P < 0.05).

Conclusions

Midpalatal suture separation was observed in 90% and 95% of patients in the RPE and MARPE groups, respectively. Both RPE and MARPE groups exhibited significant triangular basal bone expansion and skeletal relapse during consolidation. Under identical amounts of expansion, the MARPE group showed lower decrease in the skeletal, dentoalveolar and periodontal variables after consolidation. The reinforcement of RPE with miniscrews contributes to the maintenance of the basal bone during consolidation period.

Trial registration WHO Institutional Clinical Trials Registry Platform (IRB No. KCT0006871 / Registration date 27/12/2021).

Long-term effects on alveolar bone with bone-anchored and tooth-anchored rapid palatal expansion

INTRODUCTION

The purpose of this study was to evaluate the long-term effects of bone-anchored and tooth-anchored expansion appliances on alveolar bone in vertical and horizontal dimensions, compared with controls, using cone-beam computed tomography.

METHODS

We evaluated 180 cone-beam computed tomography scans for 60 patients at 3-time points: T1 (pretreatment), T2 (postexpansion), and T3 (posttreatment), for 3 groups: bone-anchored expansion appliance (BA), tooth-anchored expansion appliance (TA), and controls (T1-T3: BA, 2 years 8 months; TA, 2 years 9 months; control: 2 years 7 months). The intermolar width, molar angulation, palatal width, vertical buccal bone height, buccal bone thickness at the alveolar crest, and root apex were measured in the 3 groups at different time points.

RESULTS

In the short term, both BA and TA led to a statistically significant increase in the intermolar width and vertical buccal bone loss after expansion compared with controls. Vertical buccal bone loss was significantly greater in TA than in BA. In addition, TA led to significantly increased molar angulation (buccal tipping) compared with controls at T2. There were no significant differences in the 3 groups in the long term except vertical buccal bone loss, which was significantly greater in TA than controls. A substantial correlation was found between molar angulation and vertical buccal bone loss, and a moderate negative correlation was found between intermolar width and buccal bone thickness at the alveolar crest at T3.

CONCLUSIONS

There was no difference in the treatment outcomes between the 3 groups in the long term except vertical buccal bone loss, which was significantly increased in the TA group compared with controls.

Assessment of Patient-Centered Outcomes When Treating Maxillary Constriction Using a Slow Removable Versus a Rapid Fixed Expansion Appliance in the Adolescence Period: A Randomized Controlled Trial

Objective

This study aimed to evaluate and compare the levels of pain, discomfort, and functional impairments between slow and rapid maxillary expansion (RME) in treating skeletal maxillary constriction in the adolescence period (i.e., between 12 and 16 years).

Materials and methods

The study sample consisted of 52 patients (21 males and 31 females) with maxillary skeletal constriction in the posterior region. The patients were randomly distributed into either RME (26 patients, with a mean age of 13.87 (± 1.31) years) or slow maxillary expansion group (SME, 26 patients, with a mean age of 14.31 (± 1.19) years). The levels of pain, discomfort, and functional difficulties were assessed after 24 hours (T1), 7 days (T2), 15 days (T3), one month (T4), and four months (T5) following the onset of the expansion procedure.

Results

Patients in the RME group encountered significantly greater levels of pain and discomfort than those in the SME group at T1, T2, and T3 (p>0.001). Chewing and swallowing difficulties were significantly greater in the RME group at T1, T2, T3, and T4 (P≤0.001). The pressure on soft tissue was greater in the RME group at T2 and T3 (p>0.001). After four months (T5), the levels of pain and discomfort decreased to their lowest levels, as well as the difficulties of chewing and swallowing, and the pressure on soft tissue were almost non-existent in both groups.

Conclusion

Patients treated with the removable slow maxillary expander reported lower levels of pain and discomfort, fewer chewing and swallowing difficulties, and less pressure on soft tissues than those treated with the bonded rapid maxillary expander. These difficulties gradually decreased over time in both groups. The lower levels of pain and discomfort may make the SME an effective and comfortable treatment alternative for adolescents with skeletal maxillary constriction.

Three-dimensional craniofacial changes with maxillary expansion in young adult patients with different craniofacial morphology

Objectives:

Skeletally mature patients with transverse deficiency are best treated with surgically assisted rapid palatal expansion (RPE) procedure. Recent studies have shown that microimplant-assisted RPE (MARPE) appliances can be effective in achieving skeletal expansion in young adults. This retrospective study aimed to evaluate the skeletal and dental alveolar changes in response to treatment with MARPE appliances in three types of anteroposterior skeletal malocclusions using cone-beam computed tomography (CBCT) scans.

Material and Methods:

Seventy-eight subjects diagnosed with maxillary transverse deficiency and treated with the MARPE appliance (mean age of 22.9 ± 4.2 years) were divided into skeletal Class I, II, and III malocclusions with 26 subjects in each group. Pre- and post-treatment CBCT scans were used for superimposition to examine the skeletal and dentoalveolar changes following maxillary expansion treatment.

Results:

Significant lateral separation of the maxilla was found at the levels of the nasal floor, interzygomatic bones, and the inferior palatine margin of the alveolar process (P < 0.05) in the whole sample. Most of the sagittal and vertical variables change significantly in the whole sample and each studied group separately. Intergroup comparisons revealed no significant differences among the three skeletal classes except for the left frontozygomatic angle, left maxillary inclination angle, and torque in the first and second premolars. In Class III patients, the maxilla moved forward significantly in most of the cases (eight of 26 cases) (0.88°, P < 0.05) and the mandible moved downward and backward improving the anteroposterior skeletal relationship. Significant differences were also found in the vertical measurements (N-Me, MMP, and MP/SN, P < 0.05) in all three types of anteroposterior malocclusions.

Conclusion:

Maxillary expansion with the MARPE appliance in young adult patients induced different skeletal and dentoalveolar changes in the anteroposterior and vertical dimensions in each skeletal malocclusion with no significant difference among the three skeletal classes.

Trending topics in orthodontic treatment practices in the past 5 years: A longitudinal study on case reports

Objectives:

This study aimed to analyze the case reports published in the past 5 years in orthodontic journals in the Web of Science (WOS) indexes and evaluate the trending topics.

Material and Methods:

Following a search conducted by entering the keyword “orthodontics” in the WOS Master Journal List search site, four journals in the Science Citation Index (SCI) and five journals in the Emerging Science Citation Index (ESCI) were included in the study, and case report articles published in these journals between 2016 and 2020 were examined. The case reports were analyzed by examining each issue of each journal published during these years. In addition, frequently studied topics were examined under seven headings.

Results:

Only nine of the 16 journals in the list of related journals have published case reports in the past 5 years. The largest number of articles appeared in the American Journal of Orthodontics and Dentofacial Orthopedics for the SCI group and International Orthodontics for the ESCI group. When the frequently examined topics were evaluated, it was determined that the highest number of articles was fixed orthodontic treatments (53.4%), orthognathic surgery (18.9%), multidisciplinary treatments (6.5%), and treatments for individuals with general health problems (6.5%).

Conclusion:

The number of case reports published has gradually increased in the past 5 years. The number of articles in the journals included in the SCI is higher. The subject variety of case reports is too great to be limited to a narrow field.

Class II treatment of transverse maxillary deficiency with a single bone-borne appliance and hybrid clear aligner approach in an adult patient: A case report

This case report describes the successful orthodontic treatment of a 22-year-old female patient affected by Class II malocclusion, maxillary skeletal transverse deficiency, ectopic maxillary left lateral incisor, and mild mandibular crowding. Due to her adult skeletal age, a bone-borne appliance was applied in order to obtain both purely skeletal rapid maxillary expansion and bilateral molar distalization. After accurate matching between the pretreatment cone-beam computed tomography scan and digital models, 4 self-drilling miniscrews were inserted palatally using a computer-aided design and computer-aided manufacturing (CAD/CAM) surgical template to guide their correct and safe placement, and a bone-borne appliance was fitted. After this first phase, the hybrid clear aligner approach was used to obtain alignment, levelling, and arch coordination, with the use of a partial lingual fixed appliance on the maxillary incisors.

Efficacy of Miniscrew-Assisted Rapid Palatal Expansion (MARPE) in late adolescents and adults with the Dutch Maxillary Expansion Device: a prospective clinical cohort study

OBJECTIVES

To provide a higher degree of evidence on the efficacy of Miniscrew-Assisted Rapid Palatal Expansion (MARPE) in late adolescents and adults, thereby applying the Dutch Maxillary Expansion Device (D-MED).

MATERIALS AND METHODS

D-MED was developed as an individualized, 3D-designed, and fabricated MARPE appliance supported by 4 palatal miniscrews. Patients from the age of 16 onwards with transverse maxillary deficiency were enrolled consecutively. Pre-expansion and immediate post-expansion CBCTs and intra-oral scans were acquired and measurements of skeletal, alveolar, and dental expansion as well as dental and periodontal side-effects were performed.

RESULTS

Thirty-four patients were enrolled (8 men, 26 women) with mean age 27.0 ± 9.4 years. A success rate of 94.1% was achieved (32/34 patients). The mean expansion duration, or mean observation time, was 31.7 ± 8.0 days. The mean expansion at the maxillary first molars (M1) and first premolars (P1) was 6.56 ± 1.70 mm and 4.19 ± 1.29 mm, respectively. The expansion was 60.4 ± 20.1% skeletal, 8.1 ± 27.6% alveolar, and 31.6 ± 20.1% dental at M1 and 92.2 ± 14.5% skeletal, 0.0 ± 18.6% alveolar, and 7.8 ± 17.7% dental at P1, which was both statistically (p < 0.001) and clinically significant. Buccal dental tipping (3.88 ± 3.92° M1; 2.29 ± 3.89° P1), clinical crown height increase (0.12 ± 0.31 mm M1; 0.04 ± 0.22 mm P1), and buccal bone thinning (- 0.31 ± 0.49 mm M1; - 0.01 ± 0.45 mm P1) were observed, while root resorption could not be evaluated.

CONCLUSIONS

MARPE by application of D-MED manifested its efficacy in a prospective clinical setting, delivering a high amount of skeletal expansion with limited side-effects in late adolescents and adults.

CLINICAL RELEVANCE

Higher quality evidence is supportive of MARPE as a safe and successful non-surgical treatment option for transverse maxillary deficiency.

Long-term assessment of conventional and mini-screw-assisted rapid palatal expansion on the nasal cavity

OBJECTIVES

To evaluate the long-term effects of mini-screw-assisted rapid palatal expansion (MARPE), rapid palatal expansion (RPE), and controls on the nasal cavity with cone-beam computed tomography (CBCT).

MATERIALS AND METHODS

A total of 180 CBCT scans that were part of a previous randomized trial were evaluated retrospectively for 60 patients at pretreatment (T1), postexpansion (T2), and posttreatment (T3). Patients were randomly assigned into 3 groups: MARPE, RPE, and controls (time period T1 to T3; MARPE: 2 years 8 months; RPE: 2 years 9 months; control: 2 years 7 months). Nasal height, nasal length, nasion-ANS height, ANS-PNS length, pyriform height, and nasal septal deviation angle were measured. The changes in alar width, alar base width, anterior nasal cavity width, posterior nasal cavity width, maxillary intermolar width, and maxillary intercanine width were also evaluated.

RESULTS

The alar base width, posterior nasal cavity width, anterior nasal cavity width, maxillary intercanine width, and maxillary intermolar width significantly increased (P < .05), and the nasal septal deviation angle significantly decreased (P < .05) in both the MARPE and RPE groups as compared with controls in the short term. In the long term, the nasal septal deviation angle was significantly decreased (P < .05) in the MARPE and RPE groups as compared with controls, and the posterior nasal cavity width was significantly increased (P < .05) in the MARPE group compared with the RPE group and controls.

CONCLUSIONS

MARPE and RPE led to a significant increase in the nasal cavity and alar base width compared with controls in the short term. In the long term, a significant increase was observed only in the posterior nasal cavity width with MARPE. Both MARPE and RPE led to a minimal decrease in nasal septal deviation angle in comparison with controls.

Minimally invasive surgical and miniscrew-assisted rapid palatal expansion (MISMARPE) in adult patients

The purpose of this study was to evaluate maxillary expansion, operative time and pain associated with a new minimally invasive surgical technique to treat maxillary hypoplasia in adult patients. Consecutive patients were included and prospectively analyzed. The technique consists in miniscrew-assisted rapid palatal expansion (MARPE), minimally invasive approach to maxillary osteotomies, latency period and activation period until the desired expansion. The parameters evaluated included operative time, treatment-related pain by the visual analog scale (VAS), and transverse maxillary expansion. The Shapiro-Wilk test was used to assess the normality of data distribution. A paired t-test was used to compare the data between T0 (preoperative) and T1 (postoperative - end of activation). The significance level was set at 5%. Eleven patients were included. Mean operative time was 24.11 min (14.4-32 min) and overall postoperative VAS score was 2.81 (0-9). A comparative analysis showed significant increases in maxillary width at the skeletal, alveolar, and dental levels (p < 0.0001 for all), with a mean range of 1.8 (SD 0.3) mm to 4.7 (SD 0.5) mm. The present minimally invasive surgical MARPE (MISMARPE) technique appears to yield good skeletal outcomes with minimal trauma. It might have potential for clinical use, but larger comparative studies are needed to confirm the clinical relevance of the approach.

Maxillary protraction and vertical control utilizing skeletal anchorage for midfacial-maxillary deficiency

INTRODUCTION

The efficacy and efficiency of early treatment of skeletal Class III patients with facemask therapy are well-documented; however, very few cases for adolescents or adults were reported.

OBJECTIVE

The aim of this case report was to demonstrate skeletal and dental correction of a post-pubertal-growth-spurt patient whose malocclusion consisted of a skeletal Class III with slight transverse deficiency, a high mandibular plane angle, and a retrusive maxillary complex.

CASE REPORT

A 13-year-5-months old Hispanic female was diagnosed as a retrognathic maxilla and mandible, a high mandibular plane angle, open bite pattern, a bilateral Angle Class I molar relationship with an anterior crossbite on the maxillary lateral incisors. A TAD-supported Haas rapid palatal expander was utilized for maxillary protraction combined with a facemask, vertical control, and maxillary molar distalization with fixed appliance.

RESULTS

The total treatment time was 26 months. An improved facial profile with maxillary lip support and more prominent cheeks was established. Adequate vertical control prevented a change in the mandibular plane angle even though facemask treatment can increase the vertical dimension. After the 18-month retention, excellent stability of the treatment results was shown.

CONCLUSION

With skeletal anchorage and facemask treatment, orthodontists have the ability of expanding and protracting the maxilla without tipping maxillary molars buccally and without the risk of unfavorable periodontal consequences. A TAD-supported Haas rapid palatal expander allowed to control the vertical dimension and distalize molars, while minimizing undesired consequences.

Success and complication rate of miniscrew assisted non-surgical palatal expansion in adults - a consecutive study using a novel force-controlled polycyclic activation protocol

Introduction

Bone-borne miniscrew assisted palatal expansion (MAPE) is a common technique to improve maxillary transverse deficiency in young adolescents. Adult patients usually present a challenge, as they often require additional surgical assisted maxillary expansion (SARPE). There is still no clear statement about non-surgical expansion in adult patients using this technique. The aim of this study was to evaluate the success and complication rate of non-surgical palatal expansion in adults utilizing MAPE with a novel force-controlled polycyclic expansion protocol (FCPC).

Methods

This consecutive study consisted of 33 adult patients with an average age of 29.1 ± 10.2 years (min. 18 years, max. 58 years), including one dropout patient. First, four miniscrews were inserted and after 12-weeks latency, the expander was placed and the FCPC protocol was applied (MAPE group). In case of missing expansion, a SARPE was performed (SARPE group). After maximum expansion, a cone beam CT was made and widening of the midpalatal suture was measured. The outcome variables were successful non-surgical expansion and, with sample size power above 80%, the odds of failed non-surgical expansion and associated complications were evaluated. The primary predictor variable was age. Statistical analysis was performed using R (Version 3.1) to calculate power, to construct various models for measuring the odds of requiring surgical intervention/complications, and others.

Results

Successful non-surgical expansion was achieved in 27 patients (84.4%), ranging from 18 to 49 years. Mean age differed significantly between both groups (26.8 ± 8.2 years vs. 41.3 ± 9.9 years; p < 0.001). Mean expansion at the anterior and posterior palate for the MAPE group was 5.4 ± 1.5 mm and 2.5 ± 1.1 mm, respectively. Among these subjects’ complications were observed in 18.5%. Age significantly increased the odds of complications (p = 0.019).

Conclusions

1. The success rate of MAPE among individuals aged 18 to 49 years was 84.4%.

2. A V-shaped expansion pattern in the antero-posterior dimension was mostly observed.

3. Complications were significantly associated with age.

4. A careful expansion protocol seems to be beneficial to prevent unfavorable results in adult patients.

Trial registration

Consecutive cohort study, Review Board No. EK-2-2014/0016.

Age-dependent effects of transverse maxillary deficiency treated by microimplant-assisted rapid palatal expansion: A prospective cone-beam computed tomography study

INTRODUCTION

This study investigated the results of maxillary discrepancy treated by microimplant-assisted rapid palatal expansion (MARPE) at different ages.

METHODS

Sixty patients (aged 11.0-34.1 years; 23 male and 37 female) were treated by MARPE. Cone-beam computed tomography scans and dental casts were taken before and after expansion. The data were compared among 4 age groups: early adolescents (aged 11-14 years), late adolescents (aged 15-19 years), young adults (aged 20-24 years), and old adults (aged 25-34.1 years).

RESULTS

The success rates of midpalatal suture separation were 100%, 100%, 88.2%, and 85.7% for early adolescents, late adolescents, young adults, and old adults, respectively. Palatal sutures at the level of the first molar were expanded by 4.02 mm, 3.48 mm, 2.63 mm, and 2.10 mm, corresponding to 66.7%, 58.1%, 42.0%, and 37.9% of the total dental expansion. Significant differences were found in the amounts of palatal suture expansion and the ratio of skeletal dental expansion between patients aged <20 years and patients aged ≥20 years (P <0.05). Skeletal expansion constituted 69.4%, 51.3%, 39.0%, and 29.8% of the total screw expansion. Except for the comparison between young adults and old adults, there were significant differences between groups for the ratio of skeletal screw expansion (P <0.05).

CONCLUSIONS

The midpalatal suture can be expanded by MARPE more easily in patients <20 years of age than in patients ≥20 years of age. The ratio of skeletal screw expansion decreases as age increases.

Long-term effects of conventional and miniscrew-assisted rapid palatal expansion on root resorption

INTRODUCTION

The purpose of this study was to use cone-beam computed tomography to compare immediate and long-term effects of conventional and miniscrew-assisted rapid palatal expansion (MARPE) appliances on root resorption in 2 treatment groups and a control group.

METHODS

One hundred eighty cone-beam computed tomography images of 60 patients at 3 time points were assessed: initial, postexpansion, and debond. The patients were divided into 3 groups: control (n = 19), rapid palatal expansion (RPE) appliance (n = 21), and MARPE (n = 20). The period of initial to debond varied for the 3 groups: 2 years, 7 months for controls; 2 years, 9 months for RPE; and 2 years, 8 months for MARPE. The length of mesiobuccal, distobuccal, and palatal root of the maxillary first molar (1M); the buccal root of maxillary first premolar; and second premolar were measured. The inclination of the 1M, intercuspal width (ICW), interroot width (IRW), ICW/IRW ratio, maxillary skeletal width were measured in all 3 groups at different time points.

RESULTS

Immediately after expansion, RPE and MARPE groups showed a significant increase in the molar inclination, ICW, ICW/IRW ratio, and maxillary skeletal width compared with controls at postexpansion. However, the long-term comparison did not show any significant difference for root resorption and expansion parameters between the 3 groups, except the ICW/IRW ratio, which was higher in MARPE than controls at debond. A significant negative association was observed between the length of the mesiobuccal root of 1M and molar inclination (β = -0.025; 95% confidence interval, -0.050 to 0.0008; P <0.05). The expansion of ICW and IRW did not show a significant association with root resorption.

CONCLUSIONS

The long-term outcomes showed no difference in the amount of root resorption between the RPE, MARPE, and control groups. Molar inclination showed a significant negative association with the length of the mesiobuccal root of the 1M.

Short-term effects of microimplant-assisted rapid palatal expansion on the circummaxillary sutures in skeletally mature patients: A cone-beam computed tomography study

INTRODUCTION

This study aimed to investigate the short-term effects on the circummaxillary sutures induced by microimplant-assisted rapid palatal expansion (MARPE) in skeletally mature patients.

METHODS

Cone-beam computed tomography (CBCT) images of preexpansion (T0) and postexpansion (T1) of 23 patients (mean age, 20.9 ± 3.65 years) treated with MARPE were evaluated. The T0 and T1 CBCT images were reoriented and superimposed on the basis of the anterior cranial base, using OnDemand3D software (Cybermed, Seoul, Korea). Then, width changes of 9 circummaxillary sutures (frontonasal, frontomaxillary, frontozygomatic, nasomaxillary, zygomaticomaxillary, intermaxillary, midpalatal, zygomaticotemporal, and pterygopalatine sutures) were measured on 1 section of each patient's T0 and T1 CBCT images. In addition, correlation coefficients between changes in the midpalatal sutures, the amount of appliance activation, age, and the changes in other circummaxillary sutural widths were also calculated.

RESULTS

Statistically significant (P <0.05) width increases were found in all 9 circummaxillary sutures. The changes in midpalatal suture at the maxillary central incisor level positively correlated with the intermaxillary sutures at the anterior nasal spine level, midpalatal sutures at the posterior nasal spine level, and frontomaxillary sutures (P <0.05). In addition, the changes in the midpalatal sutures at the posterior nasal spine level also positively correlated with the changes in the intermaxillary sutures at the anterior nasal spine level, frontomaxillary sutures, and medial pterygopalatine sutures (P <0.05).

CONCLUSIONS

All 9 circummaxillary sutural widths increased in skeletally mature patients immediately after MARPE. The greatest increases in width were measured in the midpalatal sutures and the intermaxillary sutures, followed by the frontomaxillary sutures.

Dentoskeletal changes and their correlations after micro-implant-assisted palatal expansion (MARPE) in adults with advanced midpalatal suture ossification

OBJECTIVES

To evaluate and correlate the dentoskeletal changes of adult patients after miniscrew-assisted rapid palatal expander (MARPE) in the two final stages of midpalatal suture ossification.

MATERIALS AND METHODS

This interventional pre-post clinical study consisted of 20 adults (24.9±1.8 years), with transverse maxillary atresia, divided into two subgroups (n=10) based on the ossification degree of the midpalatal suture: stage D, fusion completed in the palatine bone; and stage E, fusion anteriorly in the maxilla. Cone beam computed tomography (CBCT) in the pre- (T₀) and post-treatment (T₁) time intervals were used to evaluate the anterior and posterior sutural opening, activation of the expander screw, vestibular-lingual inclinations, and widths of first premolars and first molars. Maxillary interincisor diastema was measured on patients' plaster models in the same timepoints. The Wilcoxon-Mann-Whitney test, generalized linear models (GLM), and chi-square (χ²) test were employed.

RESULTS

All variables significantly increased after MARPE therapy regardless of the ossification degree (P<0.05). Patients with stage D suture presented wider interincisal diastema and maxillary suture opening (on both regions, anterior and posterior) when compared with patients with stage E (P<0.05). Maxillary interincisor diastema was positively associated with anterior and posterior suture opening for all subjects (P<0.05). MARPE therapy was unsuccessful in six patients, mostly presented by individuals with E maturation stage of the midpalatal suture.

CONCLUSIONS

After MARPE, a significant correction in the transverse defect of the maxillary basal bone was achieved for adults in the last two midpalatal suture maturation stages.

CLINICAL RELEVANCE

Adult patients in stage D of maxillary suture ossification are more susceptible to dentoskeletal changes following MARPE therapy as compared to patients with stage E.

Periodontal effects of maxillary expansion in adults using non-surgical expanders with skeletal anchorage vs. surgically assisted maxillary expansion: a systematic review

OBJECTIVES

Describe and compare harmful periodontal effects as a consequence of maxillary expansion in adult patients with different types of anchorage devices in non-surgical expanders with skeletal anchorage and surgically assisted maxillary expansion.

MATERIALS AND METHODS

An exhaustive search was carried out on the electronic databases PubMed (MEDLINE), Embase, Cochrane and LILACS. Additionally, journal references and grey literature were searched without any restrictions. After the selection and extraction process; risk of bias was assessed by the ROB-1 Cochrane tool and Newcastle-Ottawa Scale (NOS) for randomized trials and cohort studies, respectively.

RESULTS

Of 621 studies retrieved from the searches, six were finally included in this review. One of them presented a low risk bias, while five were excellent respective to selection, comparability and outcomes. Results showed that maxillary expansion in adults using non-surgical expanders (bone-borne or tooth-bone-borne with bicortical skeletal anchorage) produce less harmful periodontal effects, such as: alveolar bending with an average range from 0.92° to 2.32°, compared to surgically assisted maxillary expansion (tooth-borne) of 6.4°; dental inclination with an average range from 0.07° to 2.4°, compared to surgically assisted maxillary expansion (tooth-borne) with a range from 2.01° to 5.56°.

CONCLUSIONS

Although limited, the current evidence seems to show that the bone-borne or tooth-bone-borne with bicortical skeletal anchorage produces fewer undesirable periodontal effects.

Three-dimensional assessment of the spheno-occipital synchondrosis and clivus after tooth-borne and bone-borne rapid maxillary expansion

OBJECTIVES

To assess changes in spheno-occipital synchondrosis after rapid maxillary expansion (RME) performed with conventional tooth-borne (TB) and bone-borne (BB) appliances.

MATERIALS AND METHODS

This study included 40 subjects with transverse maxillary deficiency who received TB RME or BB RME. Cone-beam computed tomography images (CBCT) were taken before treatment (T0), and after a 6-month retention period (T1). Three-dimensional surface models of the spheno-occipital synchondrosis and basilar part of the occipital bone were generated. The CBCTs taken at T0 and T1 were registered at the anterior cranial fossa via voxel-based superimposition. Quantitative evaluation of Basion displacement was performed with linear measurements and Euclidean distances. The volume of the synchndrosis was also calculated for each time point as well as the Nasion-Sella-Basion angle (N-S-Ba°). All data were statistically analyzed to perform inter-timing and intergroup comparisons.

RESULTS

In both groups, there was a small increment of the volume of the synchondrosis and of N-S-Ba° (P < .05). Basion showed a posterosuperior pattern of displacement. However, no significant differences (P > .05) were found between the two groups.

CONCLUSIONS

Although TB and BB RME seemed to have some effects on the spheno-occipital synchondrosis, differences were very small and clinically negligible.

Geometry of anchoring miniscrew in the lateral palate that support a tissue bone borne maxillary expander affects neighboring root damage

Anchoring miniscrews used for a tissue bone borne maxillary expander (C-expander) can fail if they contact tooth roots or perforate the maxillary sinus. Cone beam computed tomography images were reviewed retrospectively to evaluate the geometric factors of miniscrew placement in the palate that contribute to root proximity (RP) and sinus perforation (SP), and to investigate the differences of miniscrew placement depth (PD) and placement angle (PA) among the groups in each variable from 340 anchoring miniscrews on 70 patients whose C-expanders showed sufficient stability after palatal expansion for orthodontic treatment. Two types of miniscrews were used: a self-tapping miniscrew with 1.8 mm-in-diameter, and a self-drilling miniscrew with 1.6 mm-in-diameter. While the self-tapping larger diameter miniscrew influenced root proximity significantly, the screw location and PD affected the rate of sinus perforation. PA was significantly different between the right and left sides of the palate. The results of this study confirmed that root proximity and sinus perforation of anchoring miniscrews in a tissue bone borne palatal expander occurred due to certain risk factors, even when the palates were expanded successfully. Knowledge of these factors can help the clinician place miniscrews with less risk of root proximity or sinus perforation.

A Simplified Digital Approach to the Treatment of a Postpuberty Patient with a Class III Malocclusion and Bilateral Crossbite

Monolateral and bilateral crossbites are amongst the most frequent forms of malocclusion in the world population. The lack of early correction of this type of malocclusion leads to the partial or total ossification of the sutures which then require surgical treatment in adult patients. In recent years, devices on minipalatal screws have noticeably increased the time window in which it is possible to correct these types of alterations. In this case report, we show how it is possible to correct a third-class skeletal malocclusion associated with a posterior bilateral crossbite in a young woman using a rapid expander on miniscrews and fixed orthodontic device to finalise the process. The procedure for the insertion of the palatal screws was aided by the use of a digitally printed surgical guide, and the appliance was applied in the same sitting thanks to the use of a digital flow software and a systematic easy driver. The CBCT scans show how the orthopaedic expansion of the upper maxilla was obtained without any important alterations that damaged the permanent teeth. This case report wishes to demonstrate how easy and predictable it can be to resolve cases of this type with optimal aesthetic and functional results even when body growth has ended.

Stress and displacement of mini-implants and appliance in Mini-implant Assisted Rapid Palatal Expansion: analysis by finite element method

Objective:

In this study, simulations were performed by the finite element method (FEM) to determine the tension and displacement in mini-implants and in expander appliance during rapid maxillary expansion, by varying the number and location of the mini-implants.

Methods:

For the computational simulation, a three-dimensional mesh was used for the maxilla, mini-implants and expander appliance. Comparisons were made on six different Mini-implant Assisted Rapid Palatal Expander (MARPE) configurations, by varying the amount and location of mini-implants. A closed suture was design and received two activations of 0.25 mm, and an open suture had a 0.5-mm aperture that received 20 activations, also of 0.25 mm.

Results:

For the closed suture, the maximum displacement values in the mini-implants were between 0.253 and 0.280 mm, and stress was between 1,348.9 and 2,948.2 MPa; in the expander appliance, the displacement values were between 0.256 and 0.281 mm, and stress was between 738.52 and 1,207.6 MPa. For the open suture, the maximum displacement values in the mini-implants were between 2.57 and 2.79 mm, and stress was between 5,765.3 and 10,366 MPa; in the appliance, the maximum displacements was between 2.53 and 2.89 mm, and stress was between 4,859.7 and 9,157.4 MPa.

Conclusions:

There were higher stress concentrations in the mini-implant than in the expander arm. In the simulations with a configuration of three mini-implants, stress overload was observed in the isolated mini-implant. Displacements of the mini-implants and arms of the appliance were similar in all simulations.

Skeletal and dentoalveolar effects using tooth-borne and tooth-bone-borne RME appliances: a randomized controlled trial with 1-year follow-up

OBJECTIVES

To evaluate and compare the skeletal and dentoalveolar effects of tooth-borne (TB) and tooth-bone-borne (TBB) rapid maxillary expansion (RME).

MATERIALS AND METHODS

Fifty-two consecutive patients who met the eligibility criteria were recruited and allocated to either the TB group, mean age 9.3 years [standard deviation (SD) 1.3], or the TBB group, mean age 9.5 years (SD 1.2). Cone-beam computed tomography (CBCT) records and plaster models were taken before (T0), directly after (T1), and 1 year after expansion (T2). Dentoalveolar and skeletal measurements were made on the CBCT images. The dental expansion was also measured on the plaster models.

RANDOMIZATION

Participants were randomly allocated in blocks of different sizes using the concealed allocation principle in a 1:1 ratio. The randomization list was also stratified by sex to ensure homogeneity between groups.

BLINDING

Due to clinical limitations, only the outcomes assessors were blinded to the groups to which the patients were allocated.

RESULTS

Skeletal expansion in the midpalatal suture and at the level of the nasal cavity was significantly higher in the TBB group. However, the magnitude of the expansion in the midpalatal suture was around 1 mm [95 per cent confidence interval (CI) 0.5-1.7, P = 0.001] more and perhaps not clinically significant. The magnitude of the expansion at the level of the nasal cavity was almost two times higher in the TBB group (95 per cent CI 0.7-2.6, P = 0.001). The dental expansion, alveolar bending, tipping of the molars, and stability 1 year post-expansion did not show any statistically significant differences between the groups. The actual direct cost of the treatment for the TBB group was approximately €300 higher than TB group.

LIMITATIONS

Double blinding was not possible due to the clinical limitations.

CONCLUSIONS

In young preadolescents with constricted maxilla and no signs of upper airway obstruction, it seems that conventional TB RME achieves the same clinical results with good stability 1 year post-expansion at lower cost.

TRIAL REGISTRATION

The trial was not registered.

Complications reported with the use of orthodontic miniscrews: A systematic review

Objective

The aim of this systematic review was to evaluate the complications and side effects associated with the clinical use of orthodontic miniscrews by systematically reviewing the best available evidence.

Methods

A survey of articles published up to March 2020 investigating the complications associated with miniscrew insertion, in both the maxilla and mandible, was performed using 7 electronic databases. Clinical studies, case reports, and case series reporting complications associated with the use of orthodontic miniscrew implants were included. Two authors independently performed study selection, data extraction, and risk-of-bias assessment.

Results

The database survey yielded 24 articles. The risk-of-bias assessment revealed low methodological quality for the included studies. The most frequent adverse event reported was root injury with an associated periradicular lesion, vitality loss, pink discoloration of the tooth, and transitory loss of pulp sensitivity. Chronic inflammation of the soft tissue surrounding the miniscrew with mucosal overgrowth was also reported. The other adverse events reported were lesion of the buccal mucosa at the insertion site, soft-tissue necrosis, and perforation of the floor of the nasal cavity and maxillary sinus. Adverse events were also reported after miniscrew removal and included secondary bleeding, miniscrew fracture, scars, and exostosis.

Conclusions

These findings highlight the need for clinicians to preliminarily assess generic and specific insertion site complications and side effects.

Skeletal width changes after mini-implant-assisted rapid maxillary expansion (MARME) in young adults

OBJECTIVES

To observe skeletal width changes after mini-implant-assisted rapid maxillary expansion (MARME) and determine the possible factors that may affect the postexpansion changes using cone-beam computed tomography (CBCT) in young adults.

MATERIALS AND METHODS

Thirty-one patients (mean age 22.14 ± 4.76 years) who were treated with MARME over 1 year were enrolled. Four mini-implants were inserted in the midpalatal region, and the number of activations ranged from 40 to 60 turns (0.13 per turn). CBCT was performed before MARME (T0), after activation (T1), and after 1 year of retention (T2). The mean period between T1 and T0 was 6 ± 1.9 months and between T2 and T1 was 13 ± 2.18 months. A paired t-test was performed to compare T0, T1, and T2. The correlations between the postexpansion changes and possible contributing factors were analyzed by Pearson correlation analysis.

RESULTS

The widths increased significantly after T1. After T2, the palatal suture width decreased from 2.50 mm to 0.75 mm. From T1 to T2, decreases recorded among skeletal variables varied from 0.13 mm to 0.41 mm. This decrease accounted for 5.75% of the total expansion (2.26 mm) in nasal width (N-N) and 19.75% at the lateral pterygoid plate. A significant correlation was found between postexpansion change and palatal cortical bone thickness and inclination of the palatal plane (ANS-PNS/SN; P < .05).

CONCLUSIONS

Expanded skeletal width was generally stable after MARME. However, some amount of relapse occurred over time. Patients with thicker cortical bone of the palate and/or flatter palatal planes seemed to demonstrate better stability.

Treatment of maxillary transversal deficiency by using a mini-implant-borne rapid maxillary expander and aligners in combination

Bone-borne rapid maxillary expansion distraction devices are used to achieve a more skeletal expansion and to avoid dental side effects of conventional expanders such as tipping of anchorage teeth. In this article, we report the use of a prefabricated expander fixed on 2 mini-implants in the anterior palate. This allows for the insertion of the mini-implants and the expander to occur without the need for an impression or any laboratory procedures. Especially when aligners are going to be used, the use of a mini-implant-borne expander seems to be reasonable because the expander can be left in place as a skeletal retainer during the aligner finishing.

Microimplant assisted rapid palatal expansion vs surgically assisted rapid palatal expansion for maxillary transverse discrepancy treatment

INTRODUCTION

This study compared the skeletal and dental changes of microimplant assisted rapid palatal expansion (MARPE) with those produced by surgically assisted rapid maxillary expansion (SARPE) in postpeak adolescents and adults.

METHODS

The sample comprised 17 patients (mean age, 26 ± 11 years) selected for the MARPE group and 15 (mean age, 28.5 ± 10.5 years) selected for the SARPE group. Cone-beam computed tomography scans taken just before and after the expansion were used to assess dental and skeletal changes and compare the changes between the groups.

RESULTS

MARPE showed greater transversal skeletal changes in the midface and posterior and anterior maxillary base measurements. The transverse displacement of the alveolar process was greater but not significant for the SARPE group than the MARPE group. Regarding dental effects, the root distance measurements did not differ between the groups, but SARPE produced a significantly greater increase in intermolar and interpremolar distance and a greater buccal inclination of the alveolar process and supporting teeth than MARPE.

CONCLUSIONS

The MARPE technique showed an increase in skeletal transverse maxillary expansion at the midface and basal bone compared with SARPE, especially at the posterior palatal region; however, no difference was found in the expansion of the alveolar process between the 2 methods. MARPE presented a more parallel expansion in both a coronal and axial view, whereas SARPE led to a V-shaped opening. The greater buccal inclination of the alveolar process and supporting teeth was observed in the SARPE group.

Comparison of skeletal and dentoalveolar changes between pure bone-borne and hybrid tooth-borne and bone-borne maxillary rapid palatal expanders using cone-beam computed tomography

Objectives:

The objectives of the study were to compare the skeletal, dentoalveolar, and periodontal changes between two types of microimplant-assisted rapid maxillary expansion appliances: The bone-anchored maxillary expanders (BAME) and the tooth-bone-anchored maxillary skeletal expander (MSE).

Materials and Methods:

Thirty-four patients with a transverse maxillary deficiency were divided into two groups; the first group (16 patients, average age 14.9 years) was treated with the MSE appliance, and the second group (18 patients, average age 13.8 years) was treated with the BAME appliance. Cone-beam computed tomography scans were taken at pre-treatment (T1) and immediately post-expansion (T2) to measure the changes in midpalatal suture opening, total expansion (TE), alveolar bone bending, dental tipping (DT), and buccal bone thickness. Data were analyzed using paired t-test and two-sample t-test.

Results:

Midpalatal suture separation was found in 100% of the patients in both groups. The TE at the first molar was 5.9 mm in the MSE group and 4.7 mm in the BAME group. The skeletal contributions were 56% and 83% of TE for the MSE and BAME groups, respectively. Significantly less dental buccal tipping and buccal bone loss were found with the BAME group. The midpalatal suture in both groups exhibited a parallel opening pattern in the axial plane.

Conclusion:

The use of BAME appliance resulted in greater skeletal effects, less dental tipping, and less buccal bone reduction compared to MSE appliance (immediately after maxillary expansion).

Computational Fluid Dynamics Analysis of Nasal Airway Changes after Treatment with C-Expander

The use of the C-expander is an effective treatment modality for maxillary skeletal deficiencies which can cause ailments and significantly reduce life expectancy in late adolescents and young adults. However, the morphological and dynamic effects on the nasal airway have not been reported. The main goal of this study was to evaluate the nasal airway changes after the implementation of a C-expander. A sample of nine patients (8 females, 1 male, age range from 15 to 29 years) was included. The morphology parameters and nasal airway ventilation parameters of pretreatment and posttreatment were measured. All study data were normally distributed. A paired t-test was used to evaluate the changes before and after treatment. After expansion, the mean and standard deviation values of intercanine maxillary width (CMW) and intermolar maxillary width (MMW) increased from 35.75 ± 2.48 mm and 54.20 ± 3.17 mm to 37.87 ± 2.26 mm (P < 0.05) and 56.65 ± 3.10 mm (P < 0.05), respectively. The nasal cavity volume increased from 20320.00 ± 3468.25 mm³ to 23134.70 ± 3918.84 mm³ (P < 0.05). The nasal pressure drop decreased from 36.34 ± 3.99 Pa to 30.70 ± 3.17 Pa (P < 0.05), while the value of the maximum velocity decreased from 6.50 ± 0.31 m/s to 5.85 ± 0.37 m/s (P < 0.05). Nasal resistance dropped remarkably from 0.16 ± 0.14 Pa/ml/s to 0.08 ± 0.06 Pa/ml/s (P < 0.05). The use of C-expander can effectively broaden the area and volume of the nasal airway, having a positive effect in the reduction of nasal resistance and improvement of nasal airway ventilation. For patients suffering from maxillary width deficiency and respiratory disorders, a C-expander may be an alternative method to treat the disease.

Long-term effects of mini-screw-assisted rapid palatal expansion on airway

OBJECTIVES

To evaluate the long-term effects on airway in patients with mini-screw-assisted rapid palatal expansion (MARPE), rapid palatal expansion (RPE), and controls with three-dimensional cone-beam computed tomography (CBCT) analysis.

MATERIALS AND METHODS

A total of 180 CBCTs of 60 patients were analyzed at different time points, such as pretreatment, postexpansion, and posttreatment. Patients were divided into three groups: mini-screw assisted rapid palatal expansion (MARPE), rapid palatal expansion (RPE), and controls. The nasal cavity, nasopharyngeal, oropharyngeal, and laryngopharyngeal airway volume and area were measured. Changes in total airway volume, total airway area, minimal cross-sectional area, maxillary intermolar width, external maxillary width, and palatal width were also evaluated.

RESULTS

Both MARPE and RPE caused a statistically significant increase in the airway after expansion as compared with the control group, but there was no statistically significant difference in the change in airway between MARPE, RPE, and the control group at posttreatment, except for nasopharyngeal volume, which was significantly increased in the MARPE group. There was no correlation between the amount of expansion and increase in total airway volume.

CONCLUSIONS

There was a significant increase in total airway volume, total airway area, and minimal cross-sectional area with MARPE and RPE immediately after expansion, but at posttreatment, the changes in the MARPE and RPE groups were similar to the change in the control group. However, MARPE led to a significant long-term increase in nasopharyngeal volume. The amount of expansion did not correlate with the increase in pharyngeal airway volume.

Finite element analysis of C-expanders with different vertical vectors of anchor screws

INTRODUCTION

C-expanders are tissue- and bone-borne maxillary expanders that are anchored by 6 orthodontic miniscrews, 3 on each side of the palate. The purpose of the study was to investigate the effect of C-expanders on the circummaxillary sutures and bucco-palatal axis of teeth in 3-dimensional finite element analyses when anchor screw vectors are different.

METHODS

Five expansion models were studied on the basis of the vertical positions of anchor screws on the palate. Anchor screws for models A, B, and C were placed symmetrically at 4 mm, 7 mm, and 15 mm below the cementoenamel junction (CEJ), respectively. Anchor screws for models D and E were placed asymmetrically at 4 mm and 15 mm below CEJ and 7 mm and 15 mm below CEJ, respectively. Stress, displacement, and angular changes of the bone and teeth were measured in elastoplastic behavior models using a static-nonlinear simulation in an implicit method.

RESULTS

Symmetrical and asymmetrical anchor screw placement with different vertical vectors were compared using finite element analyses on 5 models.

CONCLUSIONS

Using different vectors of anchor screws for C-expanders does change the pattern of palatal expansion (null hypothesis was rejected). The current investigation presents a promising future of controlled asymmetric skeletal maxillary expansion when asymmetric maxillary architecture needs to be corrected for successful orthodontic outcomes without involving orthognathic surgeries.

Effectiveness of Dental and Maxillary Transverse Changes in Tooth-Borne, Bone-Borne, and Hybrid Palatal Expansion through Cone-Beam Tomography: A Systematic Review of the Literature

Background and Objectives: Palatal expansion is a common orthodontic technique able to increase the transverse changes for subjects with constricted maxillary arches. The aim of the present investigation was to evaluate through a systematic review the tomography effectiveness of different palatal expander approaches. Materials and Methods: The database used to perform the screening and determine the eligibility of the clinical papers was PubMed (Medline). Results: The database search included a total of 284 results, while 271 articles were excluded. A total of 14 articles were included for the qualitative assessment. Conclusions: The effectiveness of the present studies reported that skeletal expansion was a useful approach to increase the transverse changes for subjects with constricted maxillary arches.

Evaluation of factors related to the success of miniscrew-assisted rapid palatal expansion

OBJECTIVES

To evaluate whether the success of miniscrew-assisted rapid palatal expansion (MARPE), performed in patients with advanced bone maturation is related to factors such as midpalatal suture (MPS) maturation, age, sex, or bicortical mini-implant anchorage.

MATERIALS AND METHODS

Twenty-eight cone beam computed tomography (CBCT) scans of adults and post-pubertal adolescents treated by MARPE were included in the sample. CBCT images before (T0) and after expansion (T1) were used to evaluate the skeletal changes and the success or failure of MARPE. Axial images of MPS were extracted from T0 and classified into one of the five maturation stages. The correlation between MARPE success and the factors of age, sex, MPS maturation, and bicortical mini-implant anchorage was investigated.

RESULTS

Only the age showed a statistically significant negative correlation with MARPE success and all the skeletal measures. There was an 83.3% success rate among individuals aged 15 to 19 years, 81.8% from 20 to 29 years, and 20% from 30 to 37 years. MPS maturation showed a negative correlation with the expansion effect. Subjects with stages B or C of MPS maturation showed a 100% success rate, followed by stage D (62.5%) and stage E (58.3%).

CONCLUSIONS

As age increased, there was a decrease in MARPE success and the skeletal effects of maxillary expansion. Sex and bicortical mini-implant anchorage were not shown to be relevant factors. There was no correlation between MPS maturation and MARPE success; however, it was observed that all cases of MARPE failure were classified as stage D or E of MPS maturation.

Orthopedic outcomes of hybrid and conventional Hyrax expanders

OBJECTIVES

To compare the effects of a hybrid miniscrew-supported expander versus a conventional Hyrax (CH) expander in growing patients.

MATERIALS AND METHODS

Forty patients were randomized into two groups: a hybrid Hyrax (HH) expander group using a Hyrax expander with two miniscrews and a CH expander group. The final sample had 18 subjects (8 female, 10 male; initial age of 10.8 years) in the HH group and 14 subjects (6 female, 8 male; initial age of 11.4 years) in the CH group. Cone-beam computed tomography examinations and digital dental models were obtained before expansion and 11 months postexpansion. The primary outcomes included the orthopedic transverse effects of expansion. Intergroup comparison was performed using analysis of covariance (P < .05).

RESULTS

Significantly greater increases in the nasal cavity width, maxillary width, and buccal alveolar crest width were found for the HH group. No intergroup differences were observed for dental arch width or shape changes.

CONCLUSIONS

The HH group showed greater increases in the nasal cavity width, maxillary width, and buccal alveolar crest width. No differences were observed for intermolar, interpremolar, or intercanine widths; arch length; or arch perimeter. Arch size and shape showed similar changes in both groups.

The Short-Term Effect of Active Skeletonized Sutural Distractor Appliance on Temporomandibular Joint Morphology of Class III Malocclusion Subjects

Objectives  The purpose of this study was to evaluate the short-term effect of active skeletonized sutural distractor (ASSD) appliance on temporomandibular joint morphology of class III malocclusion subjects.

Materials and Methods  This was a prospective interventional study. Cone-beam computerized tomography (CBCT) images of 22 patients were taken before and after treatment by using Planmeca Promax 3D CBCT machine version 2.9.2 (Planmeca OY Helsinki, Finland). The condylar width, height, length, roof of glenoid fossa thickness, and all joint spaces were measured. The condylar position was determined based on Pullinger and Hollander formula. The condylar shape was determined as per Kinzinger et al. The condylar volume was calculated by using Mimics software (Materialize, Belgium).

Statistical Analysis  Data analysis was performed by using SPSS software version 24. Wilcoxon paired signed-rank test was used to compare the difference in temporomandibular joint morphology and condylar volume between pre- and post-treatment measurements. Chi-square test was used to compare the condylar position and shape.

Results  The superior ( p = 0.000 on the right side, p = 0.005 on the left side) and posterior joint spaces ( p = 0.000 on both sides) were decreased after the treatment, respectively. The condyles were rotated upward and backward, thereby increasing the anterior joint spaces ( p = 0.000 on both sides) after the treatment. The condylar volume increases after treatment, but no significant differences were observed ( p = 0.903 on the right side, p = 0.062 on the left side).

Conclusion  The significant changes were observed in joint spaces. The condyles were more anteriorly placed before treatment. Condylar position and shape alter in response to ASSD treatment. The condylar volume did not show any significant change.

Skeletal and dental changes after maxillary expansion with a bone-borne appliance in young and late adolescent patients

INTRODUCTION

Rapid palatal expansion is a common therapy during orthodontic treatment and could be a preliminary step for correcting different malocclusions; furthermore, this treatment could be necessary at any age. Different anchorage approaches have been proposed to obtain an effective skeletal result, although every device produces both dental and skeletal effects. This study aimed to compare the dentoskeletal effects of a bone-borne palatal expander considering 2 groups of patients of different ages.

METHODS

Twenty-four patients consecutively treated were included in the study; patients were divided into 2 groups according to their age: group 1 with age ≤16 years and group 2 patients >16 years. All patients had a preexpansion cone-beam computed tomography scan; a second scan was required at the end of activations. All patients received a bone-borne appliance anchored on 4 miniscrews.

RESULTS

Significant intragroup differences were found for maxillary width and dental diameters. No significant differences were found between groups with regard to longitudinal changes, except for the maxillary right plane.

CONCLUSIONS

The use of bone-borne maxillary expansion was effective in generating palatal widening both in growing and young adult patients. No significant skeletal or dental differences were found between groups.

Comparison of skeletal maxillary transverse deficiency treated by microimplant-assisted rapid palatal expansion and tooth-borne expansion during the post-pubertal growth spurt stage

OBJECTIVE

To investigate the efficacy of microimplant-assisted rapid palatal expansion (MARPE) to treat skeletal maxillary discrepancies during the post-pubertal growth spurt stage.

MATERIALS AND METHODS

Sixty patients with skeletal maxillary transverse deficiency during the post-pubertal growth spurt stage were randomly divided into MARPE and Hyrax groups. Thirty patients (mean age: 15.1 ± 1.6 years) were treated using the four-point MARPE appliance; 30 patients (mean age, 14.8 ± 1.5 years) were treated using the Hyrax expander. Cone beam computed tomography scans and dental casts were obtained before and after expansion. The data were analyzed using paired t-tests and independent t-tests.

RESULTS

The success rates of midpalatal suture separation were 100% and 86.7% for MARPE and Hyrax groups, respectively. Palatal expansion and skeletal to dental ratio at the first molar level were greater in the MARPE group (3.82 mm and 61.4%, respectively) than in the Hyrax group (2.20 mm and 32.3%, respectively) (P < .01). Reductions in buccal alveolar bone height and buccal tipping of the first molars were less in the MARPE group than in the Hyrax group (P < .01).

CONCLUSIONS

MARPE enabled more predictable and greater skeletal expansion, as well as less buccal tipping and alveolar height loss on anchorage teeth. Thus, MARPE is a better alternative for patients with skeletal maxillary deficiency during the post-pubertal growth spurt stage.

Influence of different types of rapid maxillary expansion on root resorption: a systematic review

OBJECTIVES

This study aimed to assess the influence of different types of rapid maxillary expansion on root resorption (RR).

METHODS

Literature searches were carried out electronically in five English and two Chinese databases. Randomized controlled trials (RCTs), controlled clinical trials (CCTs), cohort studies, and case-control studies were included. The data were extracted by three authors. The risk of bias in the RCTs and nonrandomized studies were assessed in accordance with corresponding scales.

RESULTS

Among the 400 articles identified, seven were included for the final analysis. Three studies were graded as high value of evidence, while two and another two studies were graded as moderate value and low value, respectively. According to the available evidence, the tooth-borne maxillary expansion caused more obvious RR of anchorage teeth than the bone-borne one. In addition, the Haas-type palatal acrylic pads could not effectively reduce the degree of RR. The difference in the design of the retainer between the tooth-borne maxillary expansion (the use of a band or wire framework to connect the anchorage tooth) did not cause the difference in the incidence and degree of RR.

CONCLUSIONS

Clinical evidence suggested that bone-borne maxillary expansion may decrease the amount of RR, while the amounts of resorption did not significantly differ between Haas and Hyrax and between different retainer types of Hyrax.

Alveolar bone response to maxillary incisor retraction using stable skeletal structures as a reference

OBJECTIVES

To evaluate alveolar bone change in relation to root position change after maxillary incisor retraction via cone-beam computed tomography (CBCT) using stable skeletal structures as a reference.

MATERIALS AND METHODS

A total of 17 subjects (age 24.7 ± 4.4 years) who required retraction of the maxillary incisors were included. Labial and palatal alveolar bone changes and root change were assessed from preretraction and 3 months postretraction CBCT images. The reference planes were based on stable skeletal structures. The Kruskal-Wallis test and Wilcoxon signed-rank test were used to compare changes within and between groups, as appropriate. Spearman rank correlations were used to identify the parameters that correlated with alveolar bone change. The significance level was set at .05.

RESULTS

The labial alveolar bone change after maxillary incisor retraction was statistically significant (P < .05), and the bone remodeling/tooth movement (B/T) ratio was 1:1. However, the palatal bone remained unchanged (P > .05). The change in inclination was significantly related to labial alveolar bone change.

CONCLUSIONS

Using stable skeletal structures as a reference, the change in labial alveolar bone followed tooth movement in an almost 1:1 B/T ratio. Palatal alveolar bone did not remodel following maxillary incisor retraction. The change in inclination was associated with alveolar bone change.

The role of micro-implant-assisted rapid palatal expansion (MARPE) in clinical orthodontics — a literature review

A maxillary transverse deficiency is a common craniofacial problem. Rapid palatal expansion (RPE) has been traditionally considered for the treatment of children and young adolescents, but this is not applicable in late adolescents or adults due to the ossification of facial sutures. A surgically assisted rapid palatal expansion (SARPE) was initially advocated for this group of patients, but the surgical procedure is associated with morbidity. As temporary anchorage devices (TADs) have been recently and popularly applied in clinical orthodontics, micro-implant-assisted rapid palatal expansion (MARPE) has been employed to facilitate maxillary expansion in skeletally mature patients. There have been various proposed MARPE designs and the outcomes appear promising. The aim of the present article is to discuss the role of MARPE in clinical orthodontics by reviewing its background, design, indications, treatment effects, stability, and limitations in the current literature. The treatment effects of two types of MARPE, bone-borne and tooth-bone-borne (hybrid), will be individually assessed.

Critical issues concerning biocreative strategy in contemporary temporary skeletal anchorage device orthodontics: A narrative review

Biocreative Orthodontic Strategy (BOS) is designed to establish a physiologically stable occlusion in harmony with masticatory and TMJ function and healthy supporting tissues with strategic use of temporary skeletal anchorage devices (TSADs). This narrative review surveys current research that demonstrates how BOS with TSADs uses a target approach to overcome the limitations experienced with conventional orthodontic treatment. A narrative review article including research on TSADs orthodontics in the permanent dentition. This review is a brief survey of five BOS principles for contemporary TSAD orthodontics: elegant selection of TSADs, bracket prescription to enhance TSAD orthodontics, antero-posterior dimension control, transverse dimension control and airway control issues. Severe malocclusion and craniofacial dysmorphology can be treated with Biocreative Orthodontic Strategy with a minimum number of TSADs. In order to achieve successful treatment outcome using TSADs, it is critical to understand the key diagnosis and treatment principles of BOS and how to develop a target approach for the tooth and bone movement.

Maxillary dental and skeletal effects after treatment with self-ligating appliance and miniscrew-assisted rapid maxillary expansion

INTRODUCTION

The objective of the present study was to compare the maxillary dental and skeletal effects after treatment with self-ligating appliance and miniscrew-assisted rapid maxillary expansion (MARPE).

METHODS

The sample comprised 37 patients with Class I malocclusion treated without tooth extraction, divided into 2 groups: group 1 comprises 21 patients with a mean age of 19.55 years (standard deviation = 1.31), submitted to orthodontic treatment with Damon self-ligating appliance, and evaluated until the end of the alignment and leveling stage. Group 2 comprises 16 patients with a mean age of 24.92 years (standard deviation = 7.60), with maxillary atresia, who underwent MARPE, and were evaluated after the removal of the expander. Buccal bone thickness; dental inclinations; and transverse distances of the maxillary arch, nasal base, and jugula widths were measured on cone-beam computed tomography scans before and after treatment. The intergroup comparison was performed with the independent t test.

RESULTS

With treatment, there was a significantly greater decrease in buccal bone thickness of canines and premolars in the self-ligating group, the premolars presented a greater buccal inclination in the self-ligating group, and the intercanine and intermolar distances and nasal base and jugula widths showed significantly greater increases in the MARPE group than in the self-ligating group.

CONCLUSIONS

MARPE treated more severe skeletal transverse maxillary discrepancies and obtained better results than self-ligating appliances in terms of buccal bone loss, tooth inclination, and transverse skeletal increase of the maxilla. MARPE presented more skeletal effects and self-ligating appliances, more dental effects.

Linear analysis of the nasal septum in patients treated with surgically assisted rapid maxillary expansion

INTRODUCTION

Surgically assisted rapid maxillary expansion is a widely used surgical procedure for resolving transverse maxillary occlusal changes in patients with bone maturity. However, few studies about the postoperative morphologic alterations in the nasal cavity in its inferior portion and the nasal septum positioning exist.

METHODS

The linear nasal septum measurements of 26 adult patients treated with surgically assisted rapid maxillary expansion from 2009 to 2013 were assessed through a retrospective analysis of cone-beam computed tomographies, in Digital Imaging and Communications in Medicine files, through the Dolphin Imaging program (Dolphin Imaging and Management Solutions, Chatsworth, Calif), aimed to identify significant changes during 3 time periods of the treatment: preoperative, immediately after the palatal expansion device locking (immediate postoperative), and 6-months postoperative (late postoperative). The analyses were performed in the inferior third of the nasal septum, from 4 equidistant points in anteroposterior position and height, using fixed cranial references for lateral measures of displacement.

RESULTS

No significant difference was found between preoperative, immediate postoperative, and late postoperative measurements in the 4 fixed nasal septum measurements, applying the analysis of variance test with a significance level of 5%. Comparing the surgical times alone, we found no statistically significant difference between the right and left sides applying the Student t test, which also showed symmetry in the nasal septum.

CONCLUSIONS

The measurements of the nasal septum did not change in the different surgical times throughout their inferior extension, and they remained symmetrical throughout patients' follow-up period.

CBCT and CAD-CAM technology to design a minimally invasive maxillary expander

Background

A large number of articles in recent years studying the effects of non-surgically assisted tooth- versus bone-borne maxillary expanders in growing patients have found no significant differences in mid-palatal suture disjunction or even dentoalveolar changes. This suggests the need for new criteria and better use of current technology to make more effective devices and enhance the benefits of conventional treatments. This article describes a titanium grade V computer-aided design/computer-aided manufacturing (CAD/CAM) maxillary expander supported by two miniscrews, along with a 3D printed surgical guide.

Methods

The first step was to obtain a digitized model of the patient’s upper maxilla. To simplify the process and ensure the placement of the device in a high-quality bone area, the patients’ digital dental cast was superimposed with a cone beam computed tomography (CBCT) scan. Improved resistance to expansion forces was secured through the use of 2 mm-wide miniscrews, long enough for bicortical anchorage. Placement site and direction were assessed individually in order to achieve primary stability. We chose a site between the second premolars and first molars, while the inclination followed the natural contour of the palate vault. A 3D-printed, polyamide surgical guide was designed to ensure the correct placement of the device with a manual straight driver.

Results

Favorable clinical results were presented with 3D images. We confirmed a mid-palatal suture parallel separation of 3.63 mm, along with a higher palatal volume, as well as increased intercanine and intermolar distance. Segmentation of the facial soft tissue showed an expansion of nasal airways and changes in nasal morphology.

Conclusions

Digital models, CBCT and CAD/CAM technology, are essential to accomplish the goals proposed in this article. Further studies are necessary to establish safer miniscrew placement sites and insertion angles so as to achieve greater in-treatment stability. Both the clinician and the patient can benefit from the use of current technology, creating new devices and updating traditional orthodontic procedures.