Ionic Liquids-A Review of Their Toxicity to Living Organisms

Density Functional Method Study on the Cooperativity of Intermolecular H-bonding and π-π+ Stacking Interactions in Thymine-[Cnmim]Br (n = 2, 4, 6, 8, 10) Microhydrates

The exploration of the ionic liquids’ mechanism of action on nucleobase’s structure and properties is still limited. In this work, the binding model of the 1-alkyl-3-methylimidazolium bromide ([Cnmim]Br, n = 2, 4, 6, 8, 10) ionic liquids to the thymine (T) was studied in a water environment (PCM) and a microhydrated surroundings (PCM + wH2O). Geometries of the mono-, di-, tri-, and tetra-ionic thymine (T-wH2O-y[Cnmim]+-xBr−, w = 5~1 and x + y = 0~4) complexes were optimized at the M06-2X/6-311++G(2d, p) level. The IR and UV-Vis spectra, QTAIM, and NBO analysis for the most stable T-4H2O-Br−-1, T-3H2O-[Cnmim]+-Br−-1, T-2H2O-[Cnmim]+-2Br−-1, and T-1H2O-2[Cnmim]+-2Br−-1 hydrates were presented in great detail. The results show that the order of the arrangement stability of thymine with the cations (T-[Cnmim]+) by PCM is stacking > perpendicular > coplanar, and with the anion (T-Br−) is front > top. The stability order for the different microhydrates is following T-5H2O-1 < T-4H2O-Br−-1 < T-3H2O-[Cnmim]+-Br−-1 < T-2H2O-[Cnmim]+-2Br−-1 < T-1H2O-2[Cnmim]+-2Br−-1. A good linear relationship between binding EB values and the increasing number (x + y) of ions has been found, which indicates that the cooperativity of interactions for the H-bonding and π-π+ stacking is varying incrementally in the growing ionic clusters. The stacking model between thymine and [Cnmim]+ cations is accompanied by weaker hydrogen bonds which are always much less favorable than those in T-xBr− complexes; the same trend holds when the clusters in size grow and the length of alkyl chains in the imidazolium cations increase. QTAIM and NBO analytical methods support the existence of mutually reinforcing hydrogen bonds and π-π cooperativity in the systems.

Novel Glucosylimidazolium Ionic-Liquid-Supported Novozym 435 Catalysts - A Proof of Concept for an Acrylation Reaction

A series of novel ionic liquids based on glucose was synthesized in high yields in simple two or three-step reaction procedures. These carbohydrate-based ionic liquids were studied and compared to commercially available imidazolium-based ionic liquids as supports for Novozym 435 in the acrylation of n-butanol. A direct correlation between the availability of hydroxy groups and the overall activity as well as an enhanced recyclability of the biocatalyst has been found for the glucose-based ionic liquids.

Cholesterol Protects the Liquid-Ordered Phase of Raft Model Membranes from the Destructive Effect of Ionic Liquids

Ionic liquids (ILs), although being a class of promising green solvents, have received many reports on the toxicity to living organisms. In this work, aiming at elucidating the disruptive effect of ILs to cell membrane lipid rafts, we investigated the effect of three 1-octylimidazolium-based ILs on the properties of the liquid ordered phase (L_o, a commonly used lipid raft model) of egg sphingomyelin (SM)-cholesterol model membrane. We found that, in the absence of cholesterol, a very low IL:SM molar ratio of 0.01:1 could disrupt the integrity of the bilayer structure. In sharp contrast, the presence of cholesterol in lipid bilayers helps the L_o phase resist the damaging effect of the ILs. For the role of the IL headgroup, we found that the mono- and trisubstituted species show a stronger destructive effect on the structures of the model rafts than the commonly used disubstituted counterpart.

Metabolomic analysis of Scenedesmus obliquus reveals new insights into the phytotoxicity of imidazolium nitrate ionic liquids

Due to the persistence of ionic liquids (ILs) in aquatic environments, it is necessary to reveal their ecological risk to aquatic organisms. Herein, the biotoxicity of two alkyl-methylimidazolium nitrate ILs ([C₁₀mim]NO₃ and [C₁₂mim]NO₃) against Scenedesmus obliquus were studied. Results showed that the growth inhibition of S. obliquus increased with increasing concentrations of ILs, maximum values of 94.61% at 4 mg/L of [C₁₀mim]NO₃ and 97.34% at 0.8 mg/L of [C₁₂min]NO₃ were observed. The fluorescence parameters of photosystem II, such as light quantum yield and electron transfer rate, showed a negative relationship with the exposure dose. [C₁₂mim]NO₃ had a more significant effect than [C₁₀mim]NO₃. Moreover, the redox homeostasis of algae was disrupted; the accumulation of reactive oxygen species, leading to obvious inhibition of superoxide dismutase and catalase activities was observed. A metabolomic analysis indicated that the contents of most metabolites were reduced significantly, and fructose and galactose decreased significantly by 42.3% and 88.6%, respectively, in the [C₁₀mim]NO₃ treatment compared to those in the control. The inhibition of amino acid biosynthesis and glyoxylate and dicarboxylate metabolism explained the more serious biotoxicity of [C₁₂mim]NO₃ than that of [C₁₀mim]NO₃. This study facilitates a better understanding of the environmental safety and ecological risks of ILs.

Biological applications of the NanoSuit for electron imaging and X-microanalysis of insulating specimens

Field emission scanning electron microscopy (FESEM) is an essential tool for observing surface details of specimens in a high vacuum. A series of specimen procedures precludes the observations of living organisms, resulting in artifacts. To overcome these problems, Takahiko Hariyama and his colleagues proposed the concept of the "nanosuit" later referred to as "NanoSuit", describing a thin polymer layer placed on organisms to protect them in a high vacuum in 2013. The NanoSuit is formed rapidly by (i) electron beam irradiation, (ii) plasma irradiation, (iii) Tween 20 solution immersion, and (iv) surface shield enhancer (SSE) solution immersion. Without chemical fixation and metal coating, the NanoSuit-formed specimens allowed structural preservation and accurate element detection of insulating, wet specimens at high spatial resolution. NanoSuit-formed larvae were able to resume normal growth following FESEM observation. The method has been employed to observe unfixed and uncoated bacteria, multicellular organisms, and paraffin sections. These results suggest that the NanoSuit can be applied to prolong life in vacuo and overcome the limit of dead imaging of electron microscopy.

Deep Probabilistic Learning Model for Prediction of Ionic Liquids Toxicity

Identification of ionic liquids with low toxicity is paramount for applications in various domains. Traditional approaches used for determining the toxicity of ionic liquids are often expensive, and can be labor intensive and time consuming. In order to mitigate these limitations, researchers have resorted to using computational models. This work presents a probabilistic model built from deep kernel learning with the aim of predicting the toxicity of ionic liquids in the leukemia rat cell line (IPC-81). Only open source tools, namely, RDKit and Mol2vec, are required to generate predictors for this model; as such, its predictions are solely based on chemical structure of the ionic liquids and no manual extraction of features is needed. The model recorded an RMSE of 0.228 and R2 of 0.943. These results indicate that the model is both reliable and accurate. Furthermore, this model provides an accompanying uncertainty level for every prediction it makes. This is important because discrepancies in experimental measurements that generated the dataset used herein are inevitable, and ought to be modeled. A user-friendly web server was developed as well, enabling researchers and practitioners ti make predictions using this model.

Systematic evaluation of hydrophobic deep eutectic solvents as alternative media for the extraction of metal ions from aqueous solution

The recent development of hydrophobic deep eutectic solvents (HDESs) has led to growing interest in these reagents as possible environmentally benign replacements for conventional organic media in a host of applications, among them metal ion separations by liquid-liquid extraction. To evaluate the potential utility of these novel solvents in this application, a systematic examination of the facilitated transfer of selected alkali and alkaline earth cations into representative HDESs from aqueous solution in the presence of a macrocyclic polyether (i.e., a crown ether) has been undertaken. Comparison of the results to those obtained for a series of oxygenated, aliphatic solvents (n-alcohols) and for several 1-alkyl-3-methylimidazolium-based ionic liquids (ILs) under the same conditions indicate that despite frequent suggestions that some HDESs resemble ILs, metal ion distribution in HDES-aqueous systems more closely mimics that seen for the alcohols. Metal ion partitioning in these systems appears less dependent on the water content of the organic phase and on structural variations in the solvent than is the case for either alcohols or ionic liquids, however. The implications of these results for the design and application of HDES-based extraction systems for metal ions are described.

Antimicrobial and Cytotoxic Activity of Novel Imidazolium-Based Ionic Liquids

In this study, a series of 10 novel 1-methyl-3-octyloxymethylimidazolium derivatives carrying various anionic moieties (4-hydroxybenzenesulfonate, benzenesulfonate, carvacroloxyacetate, chloride, formate, propionate, thymoloxyacetate, vanillinoxyacetate, eugenoloxyacetate and trimethylacetate) were synthesized. Compounds were tested for their antimicrobial activity against six microbe strains (Staph-ylococcus aureus, Pseudomonas aeruginosa, Klebsiella pneumoniae, Escherichia coli, Enterococcus faecalis, and Candida albicans), cytotoxic activity against the mouse melanoma cell line (B16 F10), and surface active properties. All synthesized compounds exhibited antimicrobial activity (expressed as minimum inhibitory concentration; in range of 0.10–27.82 mM/L), especially against Gram-positive bacteria and fungi. In addition, all compounds demonstrated cytotoxicity on B16 F10 cells (IC50 values 0.0101–0.0197 mM/L). Surface properties defined as CMC values, ranged from 0.72 to 32.35 mmol L-1. The obtained results provide an insight into the promising activity of a novel group of quaternary imidazolium derivatives having ionic liquid properties. The most potent compounds, containing a thymoloxyacetate and eugenoloxyacetate moiety, could be candidates for new antimicrobial agents or surfactants.

Thermoresponsive Ionic Liquid/Water Mixtures: From Nanostructuring to Phase Separation

The thermodynamics, structures, and applications of thermoresponsive systems, consisting primarily of water solutions of organic salts, are reviewed. The focus is on organic salts of low melting temperatures, belonging to the ionic liquid (IL) family. The thermo-responsiveness is represented by a temperature driven transition between a homogeneous liquid state and a biphasic state, comprising an IL-rich phase and a solvent-rich phase, divided by a relatively sharp interface. Demixing occurs either with decreasing temperatures, developing from an upper critical solution temperature (UCST), or, less often, with increasing temperatures, arising from a lower critical solution temperature (LCST). In the former case, the enthalpy and entropy of mixing are both positive, and enthalpy prevails at low T. In the latter case, the enthalpy and entropy of mixing are both negative, and entropy drives the demixing with increasing T. Experiments and computer simulations highlight the contiguity of these phase separations with the nanoscale inhomogeneity (nanostructuring), displayed by several ILs and IL solutions. Current applications in extraction, separation, and catalysis are briefly reviewed. Moreover, future applications in forward osmosis desalination, low-enthalpy thermal storage, and water harvesting from the atmosphere are discussed in more detail.

Ionic Liquids: Environment-Friendly Greener Solvents for Organic Synthesis

Constituted by ions, ionic liquids (ILs) are evolving as greener solvents for many organic syntheses. Due to their high solvent power and low volatility, ionic liquids are serving as an environment-friendly substitute to conventional volatile organic solvents. The present review introduces ionic liquids as an insight into the diverse recent applications of ILs in organic synthesis.

One-Pot Ionic Liquid-Mediated Bioprocess for Pretreatment and Enzymatic Hydrolysis of Rice Straw with Ionic Liquid-Tolerance Bacterial Cellulase

Ionic liquid (IL) pretreatment of lignocellulose is an efficient method for the enhancement of enzymatic saccharification. However, the remaining residues of ILs deactivate cellulase, therefore making intensive biomass washing after pretreatment necessary. This study aimed to develop the one-pot process combining IL pretreatment and enzymatic saccharification by using low-toxic choline acetate ([Ch][OAc]) and IL-tolerant bacterial cellulases. Crude cellulases produced from saline soil inhabited Bacillus sp. CBD2 and Brevibacillus sp. CBD3 were tested under the influence of 0.5–2.0 M [Ch][OAc], which showed that their activities retained at more than 95%. However, [Ch][OAc] had toxicity to CBD2 and CBD3 cultures, in which only 32.85% and 12.88% were alive at 0.5 M [Ch][OAc]. Based on the specific enzyme activities, the sugar amounts produced from one-pot processes using 1 mg of CBD2 and CBD3 were higher than that of Celluclast 1.5 L by 2.0 and 4.5 times, respectively, suggesting their potential for further application in the biorefining process of value-added products.

Study on the Effectiveness of Simultaneous Recovery and Concentration of 1-Ethyl-3-methylimidazolium Chloride Ionic Liquid by Electrodialysis with Heterogeneous Ion-Exchange Membranes

Due to the extensive range of ionic liquids (ILs) used in industry, an efficient recovery method is needed. In this study, the effectiveness of a simultaneous concentration and recovery method was investigated for 1-ethyl-3-methylimidazolium chloride ([Emim]Cl), an IL that was recovered using electrodialysis (ED). The optimal operational parameters for electrodialytic recovery were determined empirically. The variables that were investigated included the concentration of IL, applied voltage, linear flow velocity and the diluate-to-concentrate volume ratio. The recovery of [Emim]Cl, the concentration degree, the [Emim]Cl flux across membranes, the current efficiency, as well as the energy consumption were determined. The results of the experiments confirmed that [Emim]Cl concentration and recovery can be achieved using ED. The highest ED efficiency was obtained when a 2 V electric potential per one membrane pair was applied, using a 2 cm/s linear flow velocity, and by adjusting to 0.2 M IL in the feed solution. By using ED, a 2.35-fold concentration of [Emim]Cl with a recovery of 90.4% could be achieved when the diluate-to-concentrate volume ratio was 2. On the other hand, a 3.35-fold concentration of [Emim]Cl with a recovery of 81.7% could be obtained when the diluate-to-concentrate volume ratio was increased to 5.

Advances Brought by Hydrophilic Ionic Liquids in Fields Involving Pharmaceuticals

The negligible volatility and high tunable nature of ionic liquids (ILs) have been the main drivers of their investigation in a wide diversity of fields, among which is their application in areas involving pharmaceuticals. Although most literature dealing with ILs is still majorly devoted to hydrophobic ILs, evidence on the potential of hydrophilic ILs have been increasingly provided in the past decade, viz., ILs with improved therapeutic efficiency and bioavailability, ILs with the ability to increase drugs' aqueous solubility, ILs with enhanced extraction performance for pharmaceuticals when employed in biphasic systems and other techniques, and ILs displaying low eco/cyto/toxicity and beneficial biological activities. Given their relevance, it is here overviewed the applications of hydrophilic ILs in fields involving pharmaceuticals, particularly focusing on achievements and advances witnessed during the last decade. The application of hydrophilic ILs within fields involving pharmaceuticals is here critically discussed according to four categories: (i) to improve pharmaceuticals solubility, envisioning improved bioavailability; (ii) as IL-based drug delivery systems; (iii) as pretreatment techniques to improve analytical methods performance dealing with pharmaceuticals, and (iv) in the recovery and purification of pharmaceuticals using IL-based systems. Key factors in the selection of appropriate ILs are identified. Insights and perspectives to bring renewed and effective solutions involving ILs able to compete with current commercial technologies are finally provided.

A Preliminary Assessment of the ‘Greenness’ of Halide-Free Ionic Liquids—An MCDA Based Approach

With the growing interests in non-aqueous media for diversified applications, ionic liquids (ILs) are frequently considered as green solvents. While the environmental, health, and safety assessments of the commercially developed ILs and their ‘greenness’ status are in debate, research focus is shifting towards the application of halide-free ILs for diversified applications. To clarify the situation on their greenness, and to understand if they really possess safe characteristics, we performed an initial assessment of 193 halide free ionic liquids composed of four groups of cations (imidazolium, pyridinium, pyrrodilinium, piperidinum) and 5 groups of anions (acetate, propionate, butyrate, alkanesulfonates, alkylsulfates). The ‘Technique for Order of Preference by Similarity to Ideal Solutions’ (TOPSIS), a multi-criteria decision analysis (MCDA) tool that allows ranking many alternatives is applied by carrying out the assessment against 14 criteria that includes hazard statements, precautionary statements, biodegradability, and toxicity towards different organisms. The ranking results obtained against the set of criteria considered show that the halide free ILs placed between recommended polar solvents: methanol and ethanol can be considered to be safer alternatives in terms of ‘greenness’. The study in this work provides an initial assessment of the halide-free ionic liquids evaluated against 14 criteria in terms of their safety characteristics (“green character”) using the MCDA-TOPSIS approach.

Rapid Activation of Diazirine Biomaterials with the Blue Light Photocatalyst

Carbene-based macromolecules are an emerging new stimuli-sensitive class of biomaterials that avoid the impediments of free radical polymerization but maintain a rapid liquid-to-biorubber transition. Activation of diazirine-grafted polycaprolactone polyol (CaproGlu) is limited to UVA wavelengths that have tissue exposure constraints and limited light intensities. For the first time, UVA is circumvented with visible light-emitting diodes at 445 nm (blue) to rapidly activate diazirine-to-carbene covalent cross-linking. Iridium photocatalysts serve to initiate diazirine, despite having little to no absorption at 445 nm. CaproGlu's liquid organic matrix dissolves the photocatalyst with no solvents required, creating a light transparent matrix. Considerable differences in cross-linking chemistry are observed in UVA vs visible/photocatalyst formulations. Empirical analysis and theoretical calculations reveal a more efficient conversion of diazirine directly to carbene with no diazoalkane intermediate detected. Photorheometry results demonstrate a correlation between shear moduli, joules light dose, and the lower limits of photocatalyst concentration required for the liquid-to-biorubber transition. Adhesion strength on ex vivo hydrated tissues exceeds that of cyanoacrylates, with a fixation strength of up to 20 kg·f·cm². Preliminary toxicity assessment on leachates and materials directly in contact with mammalian fibroblast cells displays no signs of fibroblast cytotoxicity.

The Balance between Energy, Environmental Security, and Technical Performance: The Regulatory Challenge of Nanofluids

Nowadays, numerous studies on nanomaterials (NMs) and Nanofluids (NFs) are account a plethora of applications. With the scientific society’s common goal of fulfilling the target of sustainable development proposed by the UN by 2030, it is necessary to combine efforts based on the scientific and technological knowledge already acquired, to apply these new systems with safety. There are thousands of publications that examine the use of NFs, their benefits and drawbacks, properties, behaviors, etc., but very little is known about the safety of some of these systems at a laboratory and industrial scale. What is the correct form of manipulating, storing, or even destroying them? What is their life cycle, and are they likely to be reused? Depending on the nanoparticles, the characteristics of the base fluid (water, propylene glycol, or even an ionic liquid) and the addition or not of additives/surfactants, the safety issue becomes complex. In this study, general data regarding the safety of NF (synthetic and natural) are discussed, for a necessary reflection leading to the elaboration of a methodology looking at the near future, intended to be sustainable at the level of existing resources, health, and environmental protection, paving the way for safer industrial and medical applications. A discussion on the efficient use of nanofluids with melanin (natural NM) and TiO₂ in a pilot heat collector for domestic solar energy applications illustrates this methodology, showing that technical advantages can be restricted by their environment and safety/security implications.